Статті в журналах з теми "Selective heat sintering"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Selective heat sintering".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Yu, Yue Qiang, Yan Ling Guo, and Kai Yi Jiang. "Temperature Field Simulation of Wood Powder/PES Composite Powder Material." Key Engineering Materials 667 (October 2015): 218–23. http://dx.doi.org/10.4028/www.scientific.net/kem.667.218.
Повний текст джерелаDong, Lin, Ahmed Makradi, Saïd Ahzi, and Yves Remond. "Finite Element Analysis of Temperature and Density Distributions in Selective Laser Sintering Process." Materials Science Forum 553 (August 2007): 75–80. http://dx.doi.org/10.4028/www.scientific.net/msf.553.75.
Повний текст джерелаYang, Zhiyong, Xing Liu, Zihao Zhang, Shuting Li, and Qiao Fang. "Analysis of preheating temperature field characteristics in selective laser sintering." Advances in Mechanical Engineering 14, no. 1 (January 2022): 168781402110723. http://dx.doi.org/10.1177/16878140211072397.
Повний текст джерелаDeepak Kumar, K., N. Prasanth, P. Arunkumar, Esakki Balasubramanian, and A. Abilash. "Coupled Field Transient Thermo - Structural Analysis of Inhibited Sintering Process." Applied Mechanics and Materials 813-814 (November 2015): 663–67. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.663.
Повний текст джерелаZhang, Jian, De Ying Li, Wei Fu, and Long Zhi Zhao. "Numerical Simulation of Multi-Component Powder in Selective Laser Sintering." Advanced Materials Research 139-141 (October 2010): 630–33. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.630.
Повний текст джерелаZhang, Jian, De Ying Li, Bin Qiu, and Long Zhi Zhao. "Simulation of Temperature Field in Selective Laser Sintering on PA6/Cu Composite Powders." Advanced Materials Research 213 (February 2011): 519–23. http://dx.doi.org/10.4028/www.scientific.net/amr.213.519.
Повний текст джерелаCHEN, Songtao. "Efficient Meshfree Method for Heat Conduction in Selective Laser Sintering Process." Journal of Mechanical Engineering 55, no. 7 (2019): 135. http://dx.doi.org/10.3901/jme.2019.07.135.
Повний текст джерелаTolochko, Nikolay K., Maxim K. Arshinov, Andrey V. Gusarov, Victor I. Titov, Tahar Laoui, and Ludo Froyen. "Mechanisms of selective laser sintering and heat transfer in Ti powder." Rapid Prototyping Journal 9, no. 5 (December 2003): 314–26. http://dx.doi.org/10.1108/13552540310502211.
Повний текст джерелаYaagoubi, Hanane, Hamid Abouchadi, and Mourad Taha Janan. "Simulation of the Heat Laser of the Selective Laser Sintering Process of the Polyamide12." E3S Web of Conferences 297 (2021): 01050. http://dx.doi.org/10.1051/e3sconf/202129701050.
Повний текст джерелаChen, Tiebing, and Yuwen Zhang. "Three-Dimensional Modeling of Selective Laser Sintering of Two-Component Metal Powder Layers." Journal of Manufacturing Science and Engineering 128, no. 1 (July 16, 2005): 299–306. http://dx.doi.org/10.1115/1.2122947.
Повний текст джерелаPolychronopoulos, Nickolas D., and John Vlachopoulos. "The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders." Rapid Prototyping Journal 26, no. 4 (January 31, 2020): 719–26. http://dx.doi.org/10.1108/rpj-06-2019-0162.
Повний текст джерелаXiao, K., K. W. Dalgarno, D. J. Wood, R. D. Goodridge, and C. Ohtsuki. "Indirect selective laser sintering of apatite—wollostonite glass—ceramic." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 222, no. 7 (October 1, 2008): 1107–14. http://dx.doi.org/10.1243/09544119jeim411.
Повний текст джерелаD, Rajamani, and E. Balasubramanian. "Effects of heat energy on morphology and properties of selective inhibition sintered high density polyethylene." Journal of Mechanical Engineering and Sciences 13, no. 1 (March 28, 2019): 4403–14. http://dx.doi.org/10.15282/jmes.13.1.2019.05.0375.
Повний текст джерелаMal’tzev, I. E., A. A. Basov, M. A. Borisov, and A. V. Bystrov. "STUDY OF THE PROPERTIES A FRAGMENT OF THE HYDRAULIC CIRCUIT OF THE SPACECRAFT, OBTAINED BY MEANS OF ADDITIVE TECHNOLOGIES." Spravochnik. Inzhenernyi zhurnal, no. 277 (April 2020): 11–19. http://dx.doi.org/10.14489/hb.2020.04.pp.011-019.
Повний текст джерелаMal’tzev, I. E., A. A. Basov, M. A. Borisov, and A. V. Bystrov. "STUDY OF THE PROPERTIES A FRAGMENT OF THE HYDRAULIC CIRCUIT OF THE SPACECRAFT, OBTAINED BY MEANS OF ADDITIVE TECHNOLOGIES." Spravochnik. Inzhenernyi zhurnal, no. 277 (April 2020): 11–19. http://dx.doi.org/10.14489/hb.2020.04.pp.011-019.
Повний текст джерелаYang, Lai Xia, Kun Bao, Cheng He, and Di Chen Li. "Research on the Method of Microwave Curing in Selective Laser Sintering." Applied Mechanics and Materials 271-272 (December 2012): 1110–14. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.1110.
Повний текст джерелаYaagoubi, Hanane, Hamid Abouchadi, and Mourad Taha Janan. "Numerical simulation of heat transfer in the selective laser sintering process of Polyamide12." Energy Reports 7 (November 2021): 189–99. http://dx.doi.org/10.1016/j.egyr.2021.08.089.
Повний текст джерелаZacharatos, Filimon, Ioannis Theodorakos, Panagiotis Karvounis, Simon Tuohy, Nuno Braz, Semyon Melamed, Ayala Kabla, et al. "Selective Laser Sintering of Laser Printed Ag Nanoparticle Micropatterns at High Repetition Rates." Materials 11, no. 11 (October 31, 2018): 2142. http://dx.doi.org/10.3390/ma11112142.
Повний текст джерелаKandis, M., C. W. Buckley, and T. L. Bergman. "An Engineering Model for Laser-Induced Sintering of Polymer Powders." Journal of Manufacturing Science and Engineering 121, no. 3 (August 1, 1999): 360–65. http://dx.doi.org/10.1115/1.2832689.
Повний текст джерелаMurawski, K., K. Aristovich, and H. T. Lancashire. "Selective laser sintering of glass-ceramic bonds using a defocused Nd:YAG laser." International Symposium on Microelectronics 2020, no. 1 (September 1, 2020): 000286–90. http://dx.doi.org/10.4071/2380-4505-2020.1.000286.
Повний текст джерелаWu, Jinzhe, Runhuai Yang, Jinjin Zheng, and Xiang Wang. "Super heat deflection resistance stereocomplex crystallisation of PLA system achieved by selective laser sintering." Micro & Nano Letters 13, no. 11 (November 2018): 1604–8. http://dx.doi.org/10.1049/mnl.2018.5134.
Повний текст джерелаOglezneva, Svetlana, and Almaz Khanov. "Properties of Powders from Stainless and Heat Resistant Alloys Produced by Gas Dynamic Spray for Manufacturing Parts of Complex Shape." Key Engineering Materials 746 (July 2017): 148–53. http://dx.doi.org/10.4028/www.scientific.net/kem.746.148.
Повний текст джерелаKim, Minha, Hongsub Jee, and Jaehyeong Lee. "Photo-Sintered Silver Thin Films by a High-Power UV-LED Module for Flexible Electronic Applications." Nanomaterials 11, no. 11 (October 25, 2021): 2840. http://dx.doi.org/10.3390/nano11112840.
Повний текст джерелаBalaykin, Andrey V., Ekaterina A. Nosova, and Natalia V. Galkina. "The Study of the Ageing Impact on Workability and Hardness of the Samples Made of Alloy VV751P (Ni-15Co-10Cr) after Selective Laser Sintering." Key Engineering Materials 746 (July 2017): 192–97. http://dx.doi.org/10.4028/www.scientific.net/kem.746.192.
Повний текст джерелаRen, Nai Fei, Lei Jia, and Dian Wang. "Numerical Simulation Analysis on the Temperature Field in Indirect Selective Laser Sintering of 316L." Advanced Materials Research 711 (June 2013): 209–13. http://dx.doi.org/10.4028/www.scientific.net/amr.711.209.
Повний текст джерелаDayal, Ram, Tatiana Gambaryan-Roisman, and Eberhard Abele. "HEAT TRANSFER, PHASE CHANGE, AND COALESCENCE OF PARTICLES DURING SELECTIVE LASER SINTERING OF METAL POWDERS." Computational Thermal Sciences 4, no. 5 (2012): 411–23. http://dx.doi.org/10.1615/computthermalscien.2012005795.
Повний текст джерелаLiu, Bing, Li-chao Zhang, Jian-hua Mo, and Bo Qian. "New method of improving parts accuracy by adding heat balance support in selective laser sintering." Journal of Zhejiang University-SCIENCE A 10, no. 3 (March 2009): 361–69. http://dx.doi.org/10.1631/jzus.a0820226.
Повний текст джерелаTian, Xiaoyong, Gang Peng, Mengxue Yan, Shunwen He, and Ruijuan Yao. "Process prediction of selective laser sintering based on heat transfer analysis for polyamide composite powders." International Journal of Heat and Mass Transfer 120 (May 2018): 379–86. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.12.045.
Повний текст джерелаYaagoubi, H., and H. Abouchadi. "A three dimensional meshfree-simulation of the selective laser sintering process with constant thermal coefficients applied to nylon 12 powders." MATEC Web of Conferences 286 (2019): 04003. http://dx.doi.org/10.1051/matecconf/201928604003.
Повний текст джерелаChen, Tiebing, and Yuwen Zhang. "Three-Dimensional Modeling of Laser Sintering of a Two-Component Metal Powder Layer on Top of Sintered Layers." Journal of Manufacturing Science and Engineering 129, no. 3 (December 18, 2006): 575–82. http://dx.doi.org/10.1115/1.2716714.
Повний текст джерелаBibas, Charles. "Lens-Free Optical Scanners for Metal Additive Manufacturing." JOM 74, no. 3 (February 14, 2022): 1176–87. http://dx.doi.org/10.1007/s11837-021-05044-8.
Повний текст джерелаEdith Wiria, Florencia, Kah Fai Leong, and Chee Kai Chua. "Modeling of powder particle heat transfer process in selective laser sintering for fabricating tissue engineering scaffolds." Rapid Prototyping Journal 16, no. 6 (October 5, 2010): 400–410. http://dx.doi.org/10.1108/13552541011083317.
Повний текст джерелаPloszajski, Anna R., Richard Jackson, Mark Ransley, and Mark Miodownik. "4D Printing of Magnetically Functionalized Chainmail for Exoskeletal Biomedical Applications." MRS Advances 4, no. 23 (2019): 1361–66. http://dx.doi.org/10.1557/adv.2019.154.
Повний текст джерелаCanfield, Nathan L., Jarrod V. Crum, Josef Matyas, A. Bandyopadhyay, K. Scott Weil, Larry R. Pederson, and John S. Hardy. "Sintering of Mixed-Conducting Composites for Hydrogen Membranes from Nanoscale Co-Synthesized Powders." Materials Science Forum 539-543 (March 2007): 1415–20. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1415.
Повний текст джерелаEsarte, Jesús, Jesús M. Blanco, Angela Bernardini, and Ramón Sancibrián. "Performance Assessment of a Three-Dimensional Printed Porous Media Produced by Selective Laser Melting Technology for the Optimization of Loop Heat Pipe Wicks." Applied Sciences 9, no. 14 (July 19, 2019): 2905. http://dx.doi.org/10.3390/app9142905.
Повний текст джерелаPugachuk, A. S., N. F. Fominykh, E. O. Kalashnikova, and Yu A. Gavrilova. "Investigating the hydraulic resistance in the flow part elements of pneumatic systems and heat exchangers." Journal of Physics: Conference Series 2057, no. 1 (October 1, 2021): 012015. http://dx.doi.org/10.1088/1742-6596/2057/1/012015.
Повний текст джерелаAravind, A., T. N. Siddiqui, P. Arunkumar, and E. Balasubramanian. "Comparative Study of High Performance Polymers in Selective Inhibition Sintering Process through Finite Element Analysis." Polymers and Polymer Composites 25, no. 3 (March 2017): 199–202. http://dx.doi.org/10.1177/096739111702500303.
Повний текст джерелаAsiabanpour, Bahram, Chandrashekar Subbareddy, Sravan Kolichala, and Lane VanWagner. "The heat element status assignment algorithms for the selective inhibition of sintering process array-based heating system." International Journal of Computer Applications in Technology 32, no. 2 (2008): 104. http://dx.doi.org/10.1504/ijcat.2008.020335.
Повний текст джерелаBrajlih, Tomaz, Urska Kostevsek, and Igor Drstvensek. "Influence of part’s geometrical properties on shrinkage and laser heat affected zone size at selective laser sintering." Rapid Prototyping Journal 25, no. 1 (January 7, 2019): 208–20. http://dx.doi.org/10.1108/rpj-01-2018-0032.
Повний текст джерелаKolobov, Yu R., A. N. Prokhorov, S. S. Manokhin, A. Yu Tokmacheva-Kolobova, D. I. Serebryakov та V. V. Afanasiev. "Comparative study of structural phase condition and mechanical properties of Ni–Cr(X) и Fe–Cr(Х) heat-resistant alloys obtained using additive technologies". Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya (Universitiesʹ Proceedings. Powder Metallurgy аnd Functional Coatings), № 3 (16 вересня 2018): 76–86. http://dx.doi.org/10.17073/1997-308x-2018-3-76-86.
Повний текст джерелаvan Belle, Laurent, and Alban Agazzi. "Inverse Thermal Analysis of Melting Pool in Selective Laser Melting Process." Key Engineering Materials 651-653 (July 2015): 1519–24. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.1519.
Повний текст джерелаSvyetlichnyy, Dmytro, Michal Krzyzanowski, Robert Straka, Lukasz Lach, and W. Mark Rainforth. "Application of cellular automata and Lattice Boltzmann methods for modelling of additive layer manufacturing." International Journal of Numerical Methods for Heat & Fluid Flow 28, no. 1 (January 2, 2018): 31–46. http://dx.doi.org/10.1108/hff-10-2016-0418.
Повний текст джерелаКоваль, Никита Олегович, та Оксана Сергеевна Воденникова. "ДОСЛІДЖЕННЯ МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ ТА СТРУКТУРИ СПЛАВУ IN718, ОТРИМАНОГО МЕТОДОМ 3D-ПРИНТИНГУ". Aerospace technic and technology, № 3 (26 червня 2020): 21–29. http://dx.doi.org/10.32620/aktt.2020.3.03.
Повний текст джерелаNeuberger, Heiko, Joerg Rey, Manuel Hees, Edeltraud Materna-Morris, Daniel Bolich, Jarir Aktaa, Andreas Meier, et al. "Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components." Fusion Science and Technology 72, no. 4 (September 12, 2017): 667–72. http://dx.doi.org/10.1080/15361055.2017.1350521.
Повний текст джерелаPorojan, Liliana, Mihaela Bîrdeanu, Cristina Savencu, and Sorin Porojan. "Characterization of Dental Metal-Ceramic Interfaces of Heat Pressed Ceramics on Co-Cr Frameworks Obtained with Different Technologies." Applied Mechanics and Materials 876 (February 2018): 25–30. http://dx.doi.org/10.4028/www.scientific.net/amm.876.25.
Повний текст джерелаPavlenko, A. N., D. V. Kuznetsov, and V. P. Bessmeltsev. "Heat Transfer Enhancement during Pool Boiling of Nitrogen on Porous Coatings Produced by Selective Laser Melting/Sintering (SLM/SLS)." Journal of Engineering Thermophysics 31, no. 1 (March 2022): 1–10. http://dx.doi.org/10.1134/s1810232822010015.
Повний текст джерелаYu, Hao, Shigenari Hayashi, Koji Kakehi, and Yen-Ling Kuo. "Study of Formed Oxides in IN718 Alloy during the Fabrication by Selective Laser Melting and Electron Beam Melting." Metals 9, no. 1 (December 24, 2018): 19. http://dx.doi.org/10.3390/met9010019.
Повний текст джерелаNguyen, Minh-Thuyet, Hoang-Viet Nguyen, Thai-Hung Le, Quoc-Khanh Dang, and Jin-Chun Kim. "Properties of the interface between the as-built Ti–6Al–4V sample and the Ti substrate in selective laser sintering." International Journal of Modern Physics B 34, no. 22n24 (August 25, 2020): 2040137. http://dx.doi.org/10.1142/s0217979220401372.
Повний текст джерелаWu, Hao, Rogelio Ortiz, and Joseph H. Koo. "Rubber toughened flame retardant (FR) polyamide 11 nanocomposites Part 2: synergy between multi-walled carbon nanotube (MWNT) and MMT nanoclay." Flame Retardancy and Thermal Stability of Materials 2, no. 1 (January 1, 2019): 19–29. http://dx.doi.org/10.1515/flret-2019-0003.
Повний текст джерелаWu, Tao, Yiru Tang, Dongdong Fei, Yongbo Li, and Wangyong He. "Researches on Temperature Control Strategy of SMHS-Type 3D Printing Based on Variable Universe Fuzzy Control." Journal of Advanced Computational Intelligence and Intelligent Informatics 21, no. 1 (January 20, 2017): 166–71. http://dx.doi.org/10.20965/jaciii.2017.p0166.
Повний текст джерела