Дисертації з теми "Segmental method"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Segmental method".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Hoelscher, Aaron Kindall. "Test method development for evaluating the freeze-thaw performance of segmental retaining wall blocks." Texas A&M University, 2006. http://hdl.handle.net/1969.1/4967.
Повний текст джерелаKoneshwaran, Sivalingam. "Blast response and sensitivity analysis of segmental tunnel." Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/78619/1/Sivalingam_Koneshwaran_Thesis.pdf.
Повний текст джерелаCimentepe, Ahmet Guray. "Evaluation Of Structural Analysis Methods Used For The Design Of Tbm Segmental Linings." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612795/index.pdf.
Повний текст джерелаspring methods are compared and discussed. This study shows that in addition to the characteristics of concrete segments, the mechanical and geometrical properties of longitudinal and circumferential joints have significant effects on the structural behavior of segmental lining.
Do, Ngoc Anh. "Numerical analyses of segmental tunnel lining under static and dynamic loads." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0042/document.
Повний текст джерелаThis PhD thesis has the aim to study the behaviour of segmental tunnel lining by developing a new numerical approach to the Hyperstatic Reaction Method (HRM) and producing two-dimensional (2D) and three-dimensional (3D) numerical models using the finite difference method (FDM). The study first deals with under static loads, and then performs under dynamic loads. Firstly, a literature review has been conducted. A new numerical approach applied to the HRM has then been developed. At the same time, a 2D numerical model is programmed regarding static loading conditions in order to evaluate the influence of the segmental joints, in terms of both joint distribution and joint stiffness characteristics, on the tunnel lining behaviour. After that, full 3D models of a single tunnel, twin horizontal tunnels and twin tunnels stacked over each other, excavated in close proximity in which the joint pattern is simulated, have been developed. These 3D models allow one to investigate the behaviour of not only the tunnel lining but also the displacement of the ground surrounding the tunnel during the tunnel excavation. A simplified 3D numerical model has then been produced in order to validate the new numerical approach applied to the HRM. In the last part of the manuscript, the performance of the segmental tunnel lining exposed to dynamic loading is taken into consideration through quasi-static and full dynamic analyses using 2D numerical models (FDM). A new HRM model has also been developed considering quasi-static loads. The differences of the tunnel behaviour under static and seismic loadings are highlighted
Lim, Eng G. "Circular polarised microstrip antenna design using segmental methods." Thesis, Northumbria University, 2002. http://nrl.northumbria.ac.uk/1330/.
Повний текст джерелаLee, Yiu-fai, and 李耀暉. "Analysis for segmental sharing and linkage disequilibrium: a genomewide association study on myopia." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B43912217.
Повний текст джерелаHeide, Dr Bernd. "A Method For Modifying Segmented Human Voxel Models." Universitätsbibliothek Chemnitz, 2002. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200200823.
Повний текст джерелаEs wird eine praktische Methode zum Verändern von segmentierten menschlichen Voxel-Modellen dargelegt. Die Methode kann in der Medizinphysik im Zusammenhang mit Strahlendosisberechnungen angewendet werden. Sie kann jedoch auch in anderen Gebieten benutzt werden, bei denen menschliche Voxel-Modelle zur Anwendung kommen. Die grundlegende Strategie der Methode besteht aus den folgenden Schritten: 1. Erzeugung triangulierter Oberflächen aus Objekten (Organen, Knochen, Geweben) eines segmentierten menschlichen Voxel-Modells. 2. Durchführung interaktiver Oberflächendeformationen und/oder Verschiebungen. 3. Re-Überführung der triangulierten Oberflächen in Voxel-Darstellungen der Organe und Rückschreibung in das segmentierte menschliche Voxel-Modell. Das Voxel-Volumen der modifizierten Organe kann mindestens bis auf ein halbes Voxel genau eingestellt werden. Die Anwendbarkeit der Methode wird anhand der Milz einer Leukämie-Patientin demonstriert
Mach, Ondřej. "Deformační a napěťová analýza segmentu páteře se zavedeným fixátorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400485.
Повний текст джерелаAdamský, Aleš. "Segmentace mluvčích s využitím statistických metod klasifikace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219007.
Повний текст джерелаBoudová, Markéta. "Segmentace skrytých P vln pomocí metod hlubokého učení." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442578.
Повний текст джерелаMunzar, Milan. "Automatická segmentace periodického pohybu srdečního svalstva v ultrazvukovém záznamu." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2015. http://www.nusl.cz/ntk/nusl-234943.
Повний текст джерелаCaswell, Eric D. "Analysis of a Helix Antenna Using a Moment Method Approach With Curved Basis and Testing Functions." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/37001.
Повний текст джерелаMaster of Science
Nesrstová, Markéta. "Segmentace zákazníků obchodní společnosti s využitím metod shlukové analýzy." Master's thesis, Vysoká škola ekonomická v Praze, 2015. http://www.nusl.cz/ntk/nusl-264272.
Повний текст джерелаFinch, Peter D. (Peter Donald) 1975. "Sampling benchmarks : methods for extracting intersecting segments of programs." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80065.
Повний текст джерелаIncludes bibliographical references (leaves 46-49).
by Peter D. Finch.
S.B.and M.Eng.
Zhao, Jianyu. "Risk Assessment on Housing Segments in Stockholm." Thesis, KTH, Fastigheter och byggande, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-190060.
Повний текст джерелаManek, Filip. "Mechanická studie interakce páteřního segmentu s poddajným fixátorem." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-234219.
Повний текст джерелаHesko, Branislav. "Aktivní kontury pro segmentaci ultrazvukových dat." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221388.
Повний текст джерелаŠolc, Radek. "Segmentace cévního řečiště na snímcích sítnice s využitím statistických metod." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221344.
Повний текст джерелаChen, Fan. "DISTANCE FIELD TRANSFORM WITH AN ADAPTIVE ITERATION METHOD." Kent State University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=kent1255727002.
Повний текст джерелаJacobs, Ryan (Ryan Lee). "Methods for predicting inventory levels in a segmented retail supply chain." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99028.
Повний текст джерелаThesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015. In conjunction with the Leaders for Global Operations Program at MIT.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 69).
Inventory is the largest asset on Nike's balance sheet-$3.9 Billion on May 3 1 st, 2014-and a key indicator of supply chain health. With new markets, products, and channels being added to Nike's sales portfolio each year, the environment in which Nike's supply chain must operate is becoming increasingly complex. Nike has responded to this complexity by splintering their supply chain into smaller segments, tailoring each segment to specific market and consumer needs. As a result of these market developments and Nike's organizational response, the task of understanding and predicting inventory movements has become increasingly challenging for Nike's business planning teams. This project creates an analytical method by which Nike can combine historical supply chain performance with sales forecasts to accurately predict future changes to company inventory levels. To achieve this goal and facilitate simple and flexible inventory predictions, a model was developed around the key segmentation dimensions that define Nike's supply chain. Use of this model enables Nike's senior management team to accurately predict movements in inventory due to product mix changes in the baseline sales forecasts. Additionally, the model provides Nike with a mechanism to evaluate sensitivity to forecast errors and the inventory costs associated with key strategic decisions to grow or shrink segments of their business. Preliminary results from the model over the time period FY15 - FY18 show a 2% increase in baseline inventory by the end of FY18 due both to growth in Apparel relative to Footwear and to growth in Direct-to-Consumer relative to Wholesale. This upward pressure on inventory leaves Nike in a precarious spot with Wall Street analysts who associate inventory growth relative to sales with poor marketplace performance. By carefully segmenting inventory, applying segment specific forecasts, and analyzing aggregated results through the use of the model, Nike can more accurately predict and explain movements in inventory to shareholders.
by Ryan Jacobs.
M.B.A.
S.M.
Al-Darkazali, Mohammed. "Image processing methods to segment speech spectrograms for word level recognition." Thesis, University of Sussex, 2017. http://sro.sussex.ac.uk/id/eprint/71675/.
Повний текст джерелаMoučka, Milan. "Segmentace obrazu jako výškové mapy." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-237071.
Повний текст джерелаHorečný, Peter. "Metody segmentace obrazu s malými trénovacími množinami." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-412996.
Повний текст джерелаIrving, Andrew David. "General methods for large biological networks applied to fruit fly models." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/general-methods-for-large-biological-networks-applied-to-fruit-fly-models(5eb3812e-f2dc-488b-bba4-fa0f094d4776).html.
Повний текст джерелаLucko, Gunnar. "Means and Methods Analysis of a Cast-In-Place Balanced Cantilever Segmental Bridge: The Wilson Creek Bridge Case Study." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/35904.
Повний текст джерелаHence, constructability issues need to be considered from the very beginning of projects. Structural analysis mathematically models geometry, boundary conditions, and other structural details, material properties, and so-called actions and incorporates factors of safety. Aforementioned actions, i.e. loads or restraints of deformations may act only temporarily during construction, depending on the method and sequence of erection. However, these construction loads can create considerable stresses in the unfinished structure prior to completion when it still lacks additional redundancy against failure. Furthermore, time-dependent material properties such as creep, shrinkage, and relaxation play a major role, especially in segmental construction.
A case study is provided as an example of how constructability issues are dealt with in engineering practice. The Wilson Creek Bridge is a five-span cast-in-place concrete segmental bridge that was erected with Balanced Cantilever Construction. The bridge superstructure incorporated a camber to account for time-dependent deflections in final alignment.
Form travelers were used in an alternating manner about the bridge piers to construct cantilever arms that were finally connected at midspan. These travelers remained in place until the box girder segments had reached sufficient strength to be post-tensioned to their predecessors. Casting cycle duration on this project was one week.
Master of Science
Cristofoletti, Maria Cláudia 1975. "Seções áureas e aplicações na rotina das salas de aula." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/306037.
Повний текст джерелаDissertação (mestrado profissional) - Universidade Estadual de Campinas, Instituto de Matemática, Estatística e Computação Científica
Made available in DSpace on 2018-08-26T10:57:23Z (GMT). No. of bitstreams: 1 Cristofoletti_MariaClaudia_M.pdf: 1415084 bytes, checksum: 188cc720bff00b79ca1249f2490caa57 (MD5) Previous issue date: 2015
Resumo: Apresentamos, neste trabalho, uma pesquisa relacionada à Seção Áurea, que foi estudada pelos gregos antes do tempo de Euclides, mas que recebeu deste uma definição formal chamada de Razão Extrema e Média. Optamos por iniciar mostrando que essa razão, conhecida como Razão Áurea, possui uma história rica que se apresenta em diferentes contextos. Exibimos as propriedades algébricas do número ?, resultante dessa razão, abordamos o Método da Seção Áurea, que permite encontrar pontos extremos de funções de uma variável e mostramos a sua presença geométrica nos ladrilhos de Penrose. Entendemos que tais assuntos podem ser tratados em sala de aula de forma a despertar o interesse do aluno pela Matemática, logo, preparamos sugestões de atividades que explorem esses conceitos e utilizem estratégias diversificadas
Abstract: We present, in this work, a survey related to the Golden Section, which was studied by the greeks before the time of Euclid, but that received from him a formal definition called by Extreme and Mean Ratio. We begin by showing that this ratio, known as Golden Ratio, has a rich history that is presented in different contexts. We exhibited the algebraic properties of the number ?, resulting from this ratio, we approached the Method of Golden Section, which allows to find extreme points of functions of one variable and we show its geometric presence in Penrose tiles. We believe that such matters can be dealt with in the classroom in order to arise the interest of students in Mathematics, so, we prepare suggestions for activities to explore these concepts and use diverse strategies
Mestrado
Matemática em Rede Nacional
Mestra em Matemática em Rede Nacional
Miyamoto, Kazutoshi Seaman John Weldon. "Bayesian and maximum likelihood methods for some two-segment generalized linear models." Waco, Tex. : Baylor University, 2008. http://hdl.handle.net/2104/5233.
Повний текст джерелаDadák, Michal. "Metodologie segmentace realitního trhu pro oceňovací proces." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318119.
Повний текст джерелаDescovich, Martina. "Improving the position resolution of highly segmented HPGe detectors using pulse shape analysis methods." Thesis, University of Liverpool, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272634.
Повний текст джерелаSterner, Jay. "SMARTPHONE-TAPE METHOD FOR CALCULATING BODY SEGMENT INERTIAL PARAMETERS FOR ANALYSIS OF PITCHING ARM KINETICS." DigitalCommons@CalPoly, 2020. https://digitalcommons.calpoly.edu/theses/2133.
Повний текст джерелаBrowning, Joseph Stuart. "Developing a Method to Identify Horizontal Curve Segments with High Crash Occurrences Using the HAF Algorithm." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/8809.
Повний текст джерелаCoombs, Matthew T. "Development of a new method to extract biomechanical characteristics of the in vitro multi-segment thoracic spine." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1455209212.
Повний текст джерелаSokol, Norbert. "Segmentace biologických vzorků v obrazech z kryo-elektronového mikroskopu s využitím metod strojového učení." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442577.
Повний текст джерелаKaplan, Ali Emre. "Study of Periodic and Quasi-Periodic Structures in Silicon-on-Insulator." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/11038/.
Повний текст джерелаMilechina, Larissa. "Development of gamma-ray tracking algorithms and pulse shape analysis methods for highly segmented Ge detectors." Doctoral thesis, KTH, Physics, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3828.
Повний текст джерелаMoltaš, Jaroslav. "Nástroj pro analýzu psaní uživatele na klávesnici." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236478.
Повний текст джерелаKvaššay, Adrián. "Konstrukce segmentu formy pro lisování pneumatik vyráběného technologií Selective Laser Melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-444402.
Повний текст джерелаMärker, Almuth. "Zur Methode der Kurzerfassung mittelalterlicher Handschriften : Ergebnisse und Funde in einem Segment theologischer Handschriften der Universitätsbibliothek Leipzig: Zur Methode der Kurzerfassung mittelalterlicher Handschriften : Ergebnisse und Funde in einem Segment theologischer Handschriften der Universitätsbibliothek Leipzig." Das Buch in Antike, Mittelalter und Neuzeit : Sonderbestände der Universitätsbibliothek Leipzig / hrsg. von Thomas Fuchs ... Wiesbaden : Harrassowitz, 2012. S. 71-90. ISBN 978-3-447-06689-1, 2012. https://ul.qucosa.de/id/qucosa%3A14638.
Повний текст джерелаEdwards, Robert Michael. "Optimal synthesis of printed wire spiral antennas using an efficient curved segment moment method with a genetic algorithm." Thesis, University of Sheffield, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341890.
Повний текст джерелаSplittstoesser, Riley Emiel. "A simple method for predicting dynamic lumbar motion segment angles using measures of trunk angle and subject anthropomentry." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1302112152.
Повний текст джерелаForrest, Sarah. "The validation of biomechanical methods for ageing and sex : force steadiness and body segment intertial parameters." Thesis, Aberystwyth University, 2012. http://hdl.handle.net/2160/5e18e96a-2f79-4307-be01-538b772067d8.
Повний текст джерелаLangenberg, Tobias. "Neuromeric organization of the midbrain-hindbrain boundary region in zebrafish." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2004. http://nbn-resolving.de/urn:nbn:de:swb:14-1103005640328-75382.
Повний текст джерелаMärker, Almuth. "Zur Methode der Kurzerfassung mittelalterlicher Handschriften : Ergebnisse und Funde in einem Segment theologischer Handschriften der Universitätsbibliothek Leipzig." Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-201268.
Повний текст джерелаShcheglova, Marina. "An integrated method to assess consumer motivation in difficult market niches : a case of the premium car segment in Russia /." kostenfrei, 2009. http://opus.kobv.de/tuberlin/volltexte/2010/2570/.
Повний текст джерелаBeneš, Radek. "Využití metod zpracování signálů pro zvýšení bezpečnosti automobilové dopravy." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218105.
Повний текст джерелаBraga, Paulo Farias. "Desenvolvimento de antenas de microfita com aberturas nos patches condutores atrav?s do m?todo da segmenta??o." Universidade Federal do Rio Grande do Norte, 2005. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15401.
Повний текст джерелаCoordena??o de Aperfei?oamento de Pessoal de N?vel Superior
Microstrip antennas are widely used in modern telecommunication systems. This is particularly due to the great variety of geometries and because they are easily built and integrated to other high frequency devices and circuits. This work presents a study of the properties of the microstrip antenna with an aperture impressed in the conducting patch. Besides, the analysis is performed for isotropic and anisotropic dielectric substrates. The Multiport Network Model MNM is used in combination with the Segmentation Method and the Greens function technique in the analysis of the considered microstrip antenna geometries. The numerical analysis is performed by using the boundary value problem solution, by considering separately the impedance matrix of the structure segments. The analysis for the complete structure is implemented by choosing properly the number and location of the neighboor element ports. The numerial analysis is performed for the following antenna geometries: resonant cavity, microstrip rectangular patch antenna, and microstrip rectangular patch antenna with aperture. The analysis is firstly developed for microstrip antennas on isotropic substrates, and then extended to the case of microstrip antennas on anisotropic substrates by using a Mapping Method. The experimental work is described and related to the development of several prototypes of rectangular microstrip patch antennas wtih and without rectangular apertures. A good agreement was observed between the simulated and measured results. Thereafter, a good agreement was also observed between the results of this work and those shown in literature for microstrip antennas on isotropic substrates. Furthermore, results are proposed for rectangular microstrip patch antennas wtih rectangular apertures in the conducting patch
As antenas de microfita s?o estruturas muito utilizadas nos sistemas de telecomunica??es atuais. Isto decorre, principalmente, da diversidade de configura??es e da facilidade de constru??o e integra??o dessas antenas com outros dispositivos e circuitos de altas freq??ncias. Neste trabalho, o m?todo de an?lise empregado ? o Modelo de Circuito de M?lti-Porta (Multiport Network Model MNM), que combinado com o M?todo da Segmenta??o e a t?cnica da Fun??o de Green, mostra-se adequado ao estudo da antena de microfita com abertura no patch condutor. A partir do equacionamento do problema do valor de contorno, ? ent?o realizada uma an?lise num?rica que consiste em avaliar a estrutura da antena considerada a partir da integra??o dos elementos em que ela foi dividida. Nessa an?lise, os elementos s?o representados por matrizes de imped?ncia e a integra??o ? implementada atrav?s de portas de circuitos adequadamente escolhidas em n?mero e posicionamento. Na an?lise num?rica, foram consideradas as seguintes estruturas: a cavidade ressonante, a microfita com patch retangular convencional (sem abertura) e a microfita com patch retangular com abertura. A an?lise foi efetuada para substratos isotr?picos e estendida para o caso de antenas com substratos anisotr?picos uniaxiais atrav?s do M?todo do Mapeamento. S?o apresentados resultados para a freq??ncia de resson?ncia e para a imped?ncia de entrada de antenas de microfita. A parte experimental do trabalho consistiu no projeto, constru??o e medi??o de v?rios prot?tipos de antenas de microfita com patches retangulares com e sem abertura. Observou-se que os resultados obtidos, atrav?s da simula??o num?rica, apresentaram uma boa concord?ncia com os das medi??es efetuadas. Os resultados deste trabalho, tamb?m, concordaram com os resultados de outros autores, dispon?veis na literatura
Sörengård, Mattias. "Accuracy in Swedish unsegmented and segmented rating curves : Accounting for measurement uncertainty and heteroscedasticity." Thesis, Uppsala universitet, Institutionen för geovetenskaper, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-293383.
Повний текст джерелаUppskattning av vattenflöden i vattendrag är den grundläggande informationen för de flesta hydrologiska applikationer vid olika typer av socioekonomisk planering. Att förbättra noggrannheten i avbördningskurvor då vattenflödet uppskattas vid en mätstation skulle vara värdefullt för de flesta tillämpningar där vattenflöden används. Tidigare studier har föreslagit att avbördningskurvor borde delas upp i flera segment, eftersom vattendrag inte sällan har olika segment med olika fysikaliska karaktärer. Varje segment kräver dock att 2-3 regressionsparametrar bestäms, men flödesmätningar vid olika vattennivåer är ofta få, och knappheten kan göra att en utökad modell blir överparametriserad och än mer osäker. Genom att konstruera många avbördningskurvor, segmenterade och osegmenterade, kan dessa valideras mot valideringsdata och var det möjligt se om segmenterade avbördningskurvor blev överparametriserade. Studien visade att segmenterade avbördningskurvor vid kalibrering, interpolation och extrapolation generellt inte gav bättre prediktion än osegmenterade avbördningskurvor. Vid låga flöden och tydligt motiverade segmenteringar gav segmenterade avbördningskurvor en bättre interpolation, men dock inte vid extrapolation, vilket är en indikation att segmenterade avbördningskurvor var något överparametriserade. Den största inverkan på att minska felen i avbördningskurvor var var att minska mätosäkerheten i flödesmätningarna. Med en genomsnittlig mätosäkerhet i flödesmätningarna på ±5 % kunde osäkerheten kvantifieras till kring 60 % för interpolerade osegmenterade avbördningskurvor vid höga flöden och kring 95 % vid låga flöden. Variansen var dock stor. Osäkerheten från modellvalideringen av extrapolation för osegmenterade avbördningskurvor vid höga flöden kvantifierades till kring 35 % vid höga flöden och kring 250 % vid låga flöden. Resultaten visade att de relativa felen från avbördningskurvor blev större för ju lägre flödet blir. Heteroskedastitet, som kan generera osäkerheter i avbördningskurvor, visade sig vara vanligare (59 %) i osegmenterade avbördningskurvor jämfört med segmenterade (14-15 %). Även antalet flödesmätningar hade en betydelse för felen i avbördningskurvor.
Avbördningskurva, icke-linjär regression, flöde, flödesmätning, osäkerhet, validering, hydrologi, överparametrisering, vattenstånd
Polášková, Lenka. "Použití metod hlubokého učení v úlohách zpracování obrazu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242002.
Повний текст джерелаŠtencel, Jakub. "Počítačová analýza obrazu z metody LBIC." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218414.
Повний текст джерелаŠkrobák, Dalibor. "Detekce tváří v obraze." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217297.
Повний текст джерела