Добірка наукової літератури з теми "SDA’s"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "SDA’s".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "SDA’s":
Bottlang, M., J. L. Marsh, and T. D. Brown. "Factors Influencing Accuracy of Screw Displacement Axis Detection With a D.C.-Based Electromagnetic Tracking System." Journal of Biomechanical Engineering 120, no. 3 (June 1, 1998): 431–35. http://dx.doi.org/10.1115/1.2798011.
Peng, Zhen, Jeff Linderoth, and David A. Baum. "The hierarchical organization of autocatalytic reaction networks and its relevance to the origin of life." PLOS Computational Biology 18, no. 9 (September 9, 2022): e1010498. http://dx.doi.org/10.1371/journal.pcbi.1010498.
Njeru, Geoffrey Kinyua, and John Kiboi. "Sabbath Observance in the Context of COVID-19 Pandemic." Jumuga Journal of Education, Oral Studies, and Human Sciences (JJEOSHS) 4, no. 1 (September 13, 2021): 1–12. http://dx.doi.org/10.35544/jjeoshs.v4i1.37.
Majeed, Samadar S. "Formulating Eco-Friendly Foamed Mortar by Incorporating Sawdust Ash as a Partial Cement Replacement." Sustainability 16, no. 7 (March 22, 2024): 2612. http://dx.doi.org/10.3390/su16072612.
Roósz, András, Arnold Rónaföldi, Mária Svéda, and Zsolt Veres. "Comparison of Dynamical and Empirical Simulation Methods of Secondary Dendrite Arm Coarsening." Crystals 12, no. 12 (December 15, 2022): 1834. http://dx.doi.org/10.3390/cryst12121834.
., Syaiful, Apip Supriatna, and Eka Apriana. "DESA MAJU DUKUNG SDG’s." Abdi Dosen : Jurnal Pengabdian Pada Masyarakat 3, no. 3 (September 1, 2019): 296. http://dx.doi.org/10.32832/abdidos.v3i3.340.
Hastika Ardiwidjaja, Nunung. "SDG’S IMPLEMENTATION IN LOCAL GOVERNMENT." Book Chapters of The 1st Jakarta International Conference on Social Sciences and Humanities (JICoSSH) 3 (March 2, 2019): 323–28. http://dx.doi.org/10.33822/jicossh.v3i0.24.
Nguyen, Toan D., Brandon M. Bordeau, Yu Zhang, Anna G. Mattle, and Joseph P. Balthasar. "Half-Life Extension and Biodistribution Modulation of Biotherapeutics via Red Blood Cell Hitch-Hiking with Novel Anti-Band 3 Single-Domain Antibodies." International Journal of Molecular Sciences 24, no. 1 (December 28, 2022): 475. http://dx.doi.org/10.3390/ijms24010475.
AL Rezki Ivansyah, Fadhilah Fitri, Yenni Kurniawati, and Tessy Octavia Mukhti. "Implementation Self Organizing Maps Method In Cluster Analysis Based on Achievement Suistainable Development Goal/SDG’s West Sumatera Province." UNP Journal of Statistics and Data Science 1, no. 5 (November 30, 2023): 480–87. http://dx.doi.org/10.24036/ujsds/vol1-iss5/118.
Mujalli and Moh Syarif. "MODEL PENGELOLAAN DANA DESA BERBASIS SUSTAINABLE DEVELOPMENT GOALS (SDG’s) Desa." Revenue : Jurnal Ekonomi Pembangunan dan Ekonomi Islam 7, no. 01 (May 27, 2024): 1–12. http://dx.doi.org/10.56998/jr.v7i01.72.
Дисертації з теми "SDA’s":
Fayek, Jawad. "Synthesis of Structure Determining Agents (SDAs) for zeolites with extra-large pore size." Electronic Thesis or Diss., Normandie, 2024. http://www.theses.fr/2024NORMC201.
Zeolites are uniformly crystalline porous materials formed of a vertex sharing TO4 units (T= Si, Al, Ge, etc.). They are prepared under hydrothermal conditions, by mixing a suitable structure directing agent (SDA) with a gel containing inorganic components such as silica, alumina or germanium. At specific pH and temperature, the SDA induces nucleation, seed formation and crystal growth to obtain zeolites with specific size, shape and dimension. Extra-large pore size zeolites with pore aperture larger than 0.75 nm aroused increasing interest from researchers due to their promising activity in processing bulkier molecules, improving diffusion rate, prolonging the catalyst lifetime and changing product selectivity. Our goal is to prepare SDA’s having different alkyl substituents following size expansion approach, by synthesizing ammonium salts containing either one or two alkyne moieties. Furthermore, ammonium salts based on imidazole, hexamethyl-enetetramine and 4-phenylpyridine compounds – as well as synthetic paths for the preparation of [2.2] paracyclophane based ammonium salts using King’s reaction were explored. Additionally, organic salts based on phosphorous were synthesized. Preparation, purification and preliminary results of their use as SDAs in zeolite synthesis will be shown in this thesis
Imtiaz, Muhammad. "NEW INTEGRATED SDARS ANTENNA ELEMENT FOR AUTOMOTIVE APPLICATIONS." Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-10422.
Kim, Yongjin. "Development of automobile antenna design and optimization for FM/GPS/SDARS applications." Connect to this title online, 2003. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1054307551.
Title from first page of PDF file. Document formatted into pages; contains xvii, 158 p.; also includes graphics Includes bibliographical references (p. 154-158). Available online via OhioLINK's ETD Center
Mammadrzali, S. S. "Нouston, we’ve got a problem: can sdg’s and human rights be friends in digital age?" Thesis, Вектор, 2020. https://er.nau.edu.ua/handle/NAU/44275.
Hale, Michael T. "New Deal To New Majority: SDS’s Failure to Realign the Largest Political Coalition in the 20th Century." Bowling Green State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=bgsu1447966535.
Zhang, Bin. "Fatigue behavior in an aluminum casting alloy (A356.2): Effects of some defects, SDAS, Hipping and strontium modification." Diss., The University of Arizona, 2002. http://hdl.handle.net/10150/280228.
Iben, Houria Mohamed. "Etude expérimentale et modélisation de la durée de vie en fatigue d'un alliage d'aluminium de fonderie A356-T6 sous chargement multiaxial." Thesis, Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique, 2015. http://www.theses.fr/2015ESMA0007/document.
This study aims to investigate the fatigue behaviour of A356-T6 aluminum alloy. Experimental fatigue tests at 106 cycles have been performed for two loading ratios: Rσ = 0 and Rσ = -1. The first experimental investigation was conducted on specimens from a ‘V’ wedge casting with natural and artificial defects which provides a variation of the microstructure. Following the experimental results, we have shown that defects characterized by their size and the microstructure characterized by SDAS, are the main parameters that control the fatigue limit. By comparing the results obtained for both loading ratios, it appears that the mean stress has an effect on the sensitivity to the defect size effect and microstructure.The DSG criterion was modified to introduce the effect of SDAS. This improved DSG criterion has been employed to predict the Kitagawa diagram for multiaxial loading for different loading cases. The simulation of the modified DSG criterion showed that the reduction of the fatigue limit with the defect size and SDAS is well described. In the last part a numerical model was developed to perform a simulation of the fatigue limit starting from the casting process. Using this numerical model, we simulated the defect size and SDAS depending on the solidification time, eventually the fatigue limit issimulated using the improved DSG criterion. With combining between Weibull law and modified DSG,we predict the probability of failure at each point of the structure. We proposed in this part a mold which let to obtain samples with two different microstructures. In this study, a second fatigue tests was carried out on these samples to validate the numerical simulation on the proposed mold. It turns out that the numerical model provides reasonably well the obtained experimental results
Li, Kefeng, Mihai Stoica, Changjiang Song, Qijie Zhai, and Jürgen Eckert. "Microstructure evolution of gas-atomized Fe–6.5 wt% Si droplets." Cambridge University Press, 2014. https://tud.qucosa.de/id/qucosa%3A39047.
Deora, Gautam Krishnakumar. "Simulation and Mathematical Tools for Performance Analysis of Low-Complexity Receivers." Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/31127.
Master of Science
Bogdanoff, Toni, and Jimmy Dahlström. "The influence of copper on an Al-Si-Mg alloy (A356) - Microstructure and mechanical properties." Thesis, Jönköping University, JTH, Mechanical Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-9480.
Aluminum alloys are widely used in many manufacturing areas due to good castability, lightness and mechanical properties. The purpose of this research is to investigate copper’s influence on an Al-Si-Mg alloy (A356). Copper in the range of 0.6 – 1.6 wt. % has been used in an A356 aluminum based alloy. In this work a simulation of three different casting processes, sand-, die- and high pressure die-casting has been employed with the help of gradient solidification equipment. The microstructure of the samples has been studied by optical and scanning electron microscopy. Materials in both as-cast and heat treated states have been investigated through tensile test bars to get the mechanical properties of the different conditions.
Questions that have been subjected to answer are what influence does copper have on the plastic deformation and on fracture behavior and whether there is a relationship between the content of copper and increased porosity or not; and in that case explore this relationship between the amount of copper and the mechanical behaviour.
It has been analyzed that a peak of mechanical properties is obtained with a content about 1.6 wt. % copper. The increment of copper seems to have a remarkable impact on the mechanical properties and especially after the aging process showing a large raise on the ultimate tensile strength and yield strength.
Relationship between the copper content and increased porosity could not be found.
Книги з теми "SDA’s":
Pennsylvania. Office of Employment Security. Occupational Employment Statistics., ed. Occupational trends and outlook [for] total civilian employment for 1984 and projected 1995 and annual average job openings by occupational category for JTPA Service Delivery Areas (SDAs). Harrisburg, Pa: Dept. of Labor and Industry, Office of Employment Security, Research and Statistics Division, Occupational Employment Statistics, 1988.
Redirecting Maqasid Islamic Economics Towards Rahmatan Lil’Alamin. Penerbit Peneleh, 2021. http://dx.doi.org/10.52893/peneleh.2021.57.insaf2.
Benbaji, Yitzhak. Pre-emptive Rules and the Scope of Defensive Rights. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190495657.003.0003.
Частини книг з теми "SDA’s":
Vergnano, Alberto, Umberto Bergamini, Daniele Bianchi, Paolo Veronesi, Roberto Spagnolo, and Francesco Leali. "Simulation and Experimental Validation of Secondary Dendrite Arm Spacing for AlSi7Mg0.3 Chassis Parts in Low Pressure Die Casting." In Lecture Notes in Mechanical Engineering, 28–33. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_6.
Pagès, Gilles, and Afef Sellami. "Convergence of Multi-Dimensional Quantized SDE’s." In Séminaire de Probabilités XLIII, 269–307. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-15217-7_11.
Bourhim, El Mostafa, and Aziz Akhiate. "Augmented Reality SDK’s: A Comparative Study." In Intelligent Systems Design and Applications, 559–66. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96308-8_52.
Kohatsu-Higa, Arturo, and Hoang-Long Ngo. "Weak Approximations for SDE’s Driven by Lévy Processes." In Seminar on Stochastic Analysis, Random Fields and Applications VII, 131–69. Basel: Springer Basel, 2013. http://dx.doi.org/10.1007/978-3-0348-0545-2_6.
Saba, Waseem, and Kayani I. Almas. "Empowering Women and Girls Through Education: SDG’s Vision 2030." In World Sustainability Series, 181–201. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73293-0_11.
Duan, Baoyan, Yiqun Zhang, and Jingli Du. "Spaceborne Deployable Antenna Design Software (SDADS) and Its Application." In Springer Tracts in Mechanical Engineering, 221–39. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6033-0_9.
Bech, Per. "The Social Dysfunction and Aggression Scale (SDAS-9)." In The Bech, Hamilton and Zung Scales for Mood Disorders: Screening and Listening, 23–27. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-97633-9_4.
Bech, Per. "The Social Dysfunction and Aggression Scale (SDAS-9)." In The Bech, Hamilton and Zung Scales for Mood Disorders: Screening and Listening, 23–27. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/978-3-642-61169-8_4.
Khasminskii, Rafail. "Some Special Problems in the Theory of Stability of SDE’s." In Stochastic Stability of Differential Equations, 227–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-23280-0_7.
Kohatsu-Higa, Arturo. "A Short Course on Weak Approximations for Lévy Driven SDE’s." In Stochastic Analysis: A Series of Lectures, 247–70. Basel: Springer Basel, 2015. http://dx.doi.org/10.1007/978-3-0348-0909-2_9.
Тези доповідей конференцій з теми "SDA’s":
S, Gurumoorthy, and Karthick A. "Effect of Secondary Dendrite Arm Spacing on Strength Behaviour of Automotive Alloy Wheel." In WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2024. http://dx.doi.org/10.4271/2024-01-2736.
Putta, Ramesh N., and Malur N. Srinivasan. "Mathematical Model of Solidification in Continuous Cast Low Carbon Steel Billets." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12303.
Hu, Xuefei, John W. Sutherland, and James M. Boileau. "Characterizing the Effect of 319 Aluminum Microstructure on Machinability: Part 1 — Model Development." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79653.
Prins, William, Alan Spencer, and Jim Roberts. "SM-3 SDACS Flight Test Successes." In 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-4664.
Wang, Yusheng, and Anyi Zhang. "SDADS: Stream Data Anomaly Detection System." In 2023 2nd International Conference on Cloud Computing, Big Data Application and Software Engineering (CBASE). IEEE, 2023. http://dx.doi.org/10.1109/cbase60015.2023.10439096.
Kupiainen, Antti. "Ergodic theory of SDE’s with degenerate noise." In Proceedings of a Satellite Conference of ICM 2006. WORLD SCIENTIFIC, 2007. http://dx.doi.org/10.1142/9789812791559_0003.
Marino, Ron, and Andreas Fuchs. "Dual Antenna System for Mobile SDARS Application." In SAE 2001 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2001. http://dx.doi.org/10.4271/2001-01-0008.
Nicastro, Luciano, and Giorgio Calderone. "SDAMS: SPOrt data archiving and management system." In ASTROPHYSICAL POLARIZED BACKGROUNDS: Workshop on Astrophysical Polarized Backgrounds. AIP, 2002. http://dx.doi.org/10.1063/1.1471862.
Alhapony, Faraj N., Ahmad M. Bkkar, and Khalil G. Almogassipi. "Study and Simulation for SDN’s three layers." In ICEMIS'21: The 7th International Conference on Engineering & MIS 2021. New York, NY, USA: ACM, 2021. http://dx.doi.org/10.1145/3492547.3492626.
Hong, Young-pyo, Jung-min Kim, Mun-ho Choi, Yongshik Lee, and Jong-gwan Yook. "Dual-Path Dual-Polarized Antenna System for SDARS Application." In 2006 European Microwave Conference. IEEE, 2006. http://dx.doi.org/10.1109/eumc.2006.281308.
Звіти організацій з теми "SDA’s":
Jayaraman, Sundaresan. Analysis of Defects in Trouser Manufacturing: Development of a Knowledge-Based Framework. Volume 3. SDAS User Manual. Fort Belvoir, VA: Defense Technical Information Center, November 1991. http://dx.doi.org/10.21236/ada248647.