Добірка наукової літератури з теми "Rotary percussion drilling"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Rotary percussion drilling".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Rotary percussion drilling"
Li, Peng, Hui Zhang, Shengyuan Jiang, and Weiwei Zhang. "Analysis and Testing of Load Characteristics for Rotary-Percussive Drilling of Lunar Rock Simulant with a Lunar Regolith Coring Bit." Shock and Vibration 2017 (2017): 1–15. http://dx.doi.org/10.1155/2017/3012749.
Повний текст джерелаSliwa, Tomasz, Aneta Sapińska-Śliwa, Michał Korzec, Andrzej Gonet, Marek Jaszczur, Martyna Ciepielowska, and Artur Gajdosz. "Investigation of Old Exploration Boreholes in the Lublin Basin with Regard to Potential Rotary-Percussion Drilling of Shale Gas Wells." Energies 14, no. 10 (May 11, 2021): 2734. http://dx.doi.org/10.3390/en14102734.
Повний текст джерелаKARASAWA, Hirokazu, Koji SUZUKI, and Koji TAKAHASHI. "Rock Drillability in Rotary-Percussion Drilling." Journal of MMIJ 125, no. 1 (2008): 13–20. http://dx.doi.org/10.2473/journalofmmij.125.13.
Повний текст джерелаNeskoromnykh, V. V., A. E. Golovchenko, and M. S. Popova. "Modernization of rock-cutting tool for rotary-percussion drilling that implements eccentric application of impact pulses." Proceedings of higher educational establishments. Geology and Exploration, no. 5 (November 28, 2019): 64–69. http://dx.doi.org/10.32454/0016-7762-2019-5-64-69.
Повний текст джерелаXiao, Yingjian, Charles Hurich, and Stephen D. Butt. "Characterization of rotary-percussion drilling as a seismic-while-drilling source." Journal of Applied Geophysics 151 (April 2018): 142–56. http://dx.doi.org/10.1016/j.jappgeo.2018.02.021.
Повний текст джерелаHuang, Zhi Qiang, Qin Li, Yong Tao Fan, Zhen Qiang Wei, and Hai Yan Zhu. "Study on Mechanism of Hammer Bit and Rock Interaction in Geophysical Prospecting Percussion Drilling." Advanced Materials Research 291-294 (July 2011): 2266–71. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.2266.
Повний текст джерелаOparin, V. N., V. V. Timonin, and V. N. Karpov. "Quantitative estimate of rotary–percussion drilling efficiency in rocks." Journal of Mining Science 52, no. 6 (November 2016): 1100–1111. http://dx.doi.org/10.1134/s1062739116061637.
Повний текст джерелаMuro, Tatsuro. "Drilling rate of rotary percussion drill bits and rock characteristics." Journal of Terramechanics 25, no. 3 (January 1988): 191–99. http://dx.doi.org/10.1016/0022-4898(88)90002-x.
Повний текст джерелаSapińska-Śliwa, Aneta, Rafał Wiśniowski, Michał Korzec, Artur Gajdosz, and Tomasz Śliwa. "Rotary - percussion drilling method - historical review and current possibilities of application." AGH Drilling, Oil, Gas 32, no. 2 (2015): 313. http://dx.doi.org/10.7494/drill.2015.32.2.313.
Повний текст джерелаMURO, Tatsuro, Ryoichi FUKAGAWA, and Masahiro WATANABE. "Rotary percussion forces affecting a drilling rate of bit for rock mass." Doboku Gakkai Ronbunshu, no. 391 (1988): 206–13. http://dx.doi.org/10.2208/jscej.1988.391_206.
Повний текст джерелаДисертації з теми "Rotary percussion drilling"
Chen, Jian, and 陳健. "Rock mass characterization: air-driven rotary percussive drilling process monitoring based approach." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B41509006.
Повний текст джерелаChen, Jian. "Rock mass characterization air-driven rotary percussive drilling process monitoring based approach /." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B41509006.
Повний текст джерелаMaolin, Liao. "Dynamic methods of stiffness identification in impacting systems for rotary-percussive drilling applications." Thesis, University of Aberdeen, 2016. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=230156.
Повний текст джерелаBatako, Andre Danonu Lignanmateh. "A self-exciting system for percussive-rotary drilling." Thesis, Loughborough University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402958.
Повний текст джерелаFRANCA, LUIZ FERNANDO FURTADO DE MENDONCA PENNA. "SELF-EXCITED PERCUSSIVE-ROTARY DRILLING IN HARD ROCKS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2004. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=4510@1.
Повний текст джерелаUma linha de pesquisa de grande interesse no estudo de colunas de perfuração de poços de petróleo aponta para a necessidade de se aumentar a taxa de penetração (ROP) na perfuração em rochas duras. Procurando suprir tal necessidade, este trabalho tem como objetivo estudar mecanismos e propor um novo dispositivo, utilizando as próprias vibrações geradas na coluna durante a perfuração. As várias formas de vibrar da coluna são, geralmente, indesejadas durante a perfuração. Porém, é possível utilizar algumas destas formas de vibrar para melhorar a eficiência do processo de perfuração. Inicialmente, avalia-se a influência das vibrações torcional e axial na ROP. Posteriormente, estuda-se a perfuração na ressonância e alguns aspectos e cuidados no uso desta nova técnica de perfuração, que vem sendo desenvolvida por empresas do setor. Por fim, é desenvolvido um novo dispositivo de perfuração, chamado de perfuração com martelo em ressonância ou perfuração percussiva- rotativa auto-excitada. Este dispositivo tem como premissa usar a vibração axial gerada no processo de corte, para criar uma carga harmônica na broca e excitar uma massa de aço (martelo). Desenvolve-se um modelo com vibro-impacto e atrito seco, representando o martelo e a resistência da rocha, respectivamente. Faz-se aqui, um estudo numérico e uma validação experimental do movimento percussivo de um modelo que representa a broca com este novo dispositivo. Os resultados mostram que a melhor forma do dispositivo operar é impactando a cabeça da broca, em condição de período-1, com um impacto por ciclo de forçamento. Adicionalmente, os parâmetros do experimento são identificados e os resultados numérico-experimental são comparados, mostrando que são similares.
An area of interest in the study of drillstrings is due to the device of increasing the rate of penetration (ROP) in hard rocks. Trying to supply such necessity, this work aims to study mechanisms and to propose a new device, using vibrations generated in the drillstring itself. The various forms of drillstring vibrations are generally regarded as detrimental in the question. However, it is possible to use some of these vibrations forms in such a way as to enhance drilling performance. Initially, the influence of the torsional and axial vibrations in ROP is analyzed. Next, the resonance drilling, that is being developed by companies in this area, and some aspects and cares in the use of this new drilling technique are studied. At the end, a new drilling device, called resonance hammer drilling or self excited percussive rotary drilling, is developed. This device has as premise to use the axial vibration due to the cutting process, to generate a harmonic load at the bit and to excite a steel mass (hammer). A model with vibro-impact and dry friction is developed, representing the hammer and the resistance of the medium, respectively. It is presented a numeric study and an experimental validation of the percussive motion of the model, that represent the bit. The results show that the best way of the hammer to operate is impacting the bit head, in period-1 condition, ie, with one impact per cycle. Moreover, the experimental parameters are identified and since the numerical-experimental results are similar, the model used is validated.
Kilfoil, Arthur Mark. "Water flushing of rock chips from horizontal holes drilled by rotary percussion." Thesis, 1997. https://hdl.handle.net/10539/26151.
Повний текст джерелаThe flushing flow rate required to maximise penetration rate of holes drilled by rotary percussion is dependant on drilling parameters and chip size. Experimental work to determine the optimal flushing water flow rate for two common drilling situations was undertaken. It consisted of drilling, analysis of chip samples and flow visualization. A computer modal to predict flow rate was developed. Its output and the experimental results Were combined to explain the relationship between penetration rate and flow rate. All chips should be fiushed from the gap between the bit and the end of the hole in the time between hammer blows (ie. - within the duration of a percussion cycle). As flow rate increases, flushing improves and therefore penetration rate increases. Once flushing is adequate there is no mechanism for further increases in penetration rate, thus it remains constant and independent of further increases in flow.
Andrew Chakane 2018
Книги з теми "Rotary percussion drilling"
Marianowski, Jan. Transmisja energii uderzenia wzdłuż przemodu wiertniczego podczas wiercenia obrotowo-undarowego: Transmission of impact energy along a boring conduit during the rotary-percussive drilling. Kraków: Wydawnictwa AGH, 2012.
Знайти повний текст джерелаЧастини книг з теми "Rotary percussion drilling"
Marjoribanks, Roger. "drilling, rotary percussion bits Rotary Percussion and Auger Drilling." In Geological Methods in Mineral Exploration and Mining, 85–97. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-74375-0_6.
Повний текст джерелаKim, Jongheon, Jinkwang Kim, and Hyun Myung. "Embedded Drilling System Using Rotary-Percussion Drilling." In Robot Intelligence Technology and Applications 5, 213–19. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78452-6_18.
Повний текст джерелаSenjoba, Lesego, Yoshino Kosugi, Masaya Hisada, and Youhei Kawamura. "Lithology identification during rotary percussion drilling based on acceleration waveform 1D convolutional neural network." In Rock Mechanics and Engineering Geology in Volcanic Fields, 435–41. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003293590-54.
Повний текст джерела"rotary percussion drilling." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 1145–46. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_183536.
Повний текст джерела"rotary-percussion drilling equipment." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 1146. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_183537.
Повний текст джерела"percussive rotary drilling." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 976. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_160787.
Повний текст джерела"rotary percussive drilling." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 1146. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_183540.
Повний текст джерелаCarlos, Lopez Jimeno, Lopez Jimeno Emilio, Javier Ayala Carcedo Francisco, and Ramiro Yvonne Visser de. "Rotary percussive drilling." In Drilling and Blasting of Rocks, 8–35. Routledge, 2017. http://dx.doi.org/10.1201/9781315141435-2.
Повний текст джерела"percussive rotary core drilling." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 976. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_160791.
Повний текст джерелаCarlos, Lopez Jimeno, Lopez Jimeno Emilio, Javier Ayala Carcedo Francisco, and Ramiro Yvonne Visser de. "Rotary percussive drilling accessories." In Drilling and Blasting of Rocks, 36–47. Routledge, 2017. http://dx.doi.org/10.1201/9781315141435-3.
Повний текст джерелаТези доповідей конференцій з теми "Rotary percussion drilling"
Li, Bodong, Yulin Tu, Guodong David Zhan, Abdulwahab Aljohar, Ossama Sehsah, and Ke Ke. "Parameter Optimization and Application Evaluation of Rotary Percussion Drilling." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21253-ms.
Повний текст джерелаQuan, Qiquan, S. Li, S. Jiang, X. Hou, and Z. Deng. "Control of Drilling and Coring Device Based on Online Identification." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62804.
Повний текст джерелаYulin, Tu, Bodong Li, Guodong Zhan, Rached M. Rached, and Eduardo Gramajo. "Study on Rotary Percussion Tool Parameters Optimization and Trial Test Evaluation." In International Petroleum Technology Conference. IPTC, 2023. http://dx.doi.org/10.2523/iptc-23005-ms.
Повний текст джерелаPeltokangas, Suvi, Sirpa Launis, Markus Saarela, and Jouni Mattila. "Modeling and Simulation of a Hydraulic Drill for Control System Design Purposes." In ASME/BATH 2017 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/fpmc2017-4290.
Повний текст джерелаLi, Bodong, Abdulwahab Aljohar, Guodong David Zhan, Ossama Sehsah, Ali Otaibi, and Zhongwei Suo. "ROP Enhancement in High Mud Weight Applications Using Rotary Percussion Drilling." In Abu Dhabi International Petroleum Exhibition & Conference. Society of Petroleum Engineers, 2020. http://dx.doi.org/10.2118/203201-ms.
Повний текст джерелаXuan, Lingchao, Zhichuan Guan, and Huaigang Hu. "Analysis and Improvement of the Rotary Percussion Drilling Tool in Oil Wells." In 2015 International Symposium on Material, Energy and Environment Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/ism3e-15.2015.122.
Повний текст джерелаLi, Bodong, Guodong David Zhan, Jianhui Xu, Yulin Tu, and Zhongwei Suo. "Implementation of Selective Laser Melting Technology in Development of Rotary Percussion Drilling Tool." In International Petroleum Technology Conference. IPTC, 2022. http://dx.doi.org/10.2523/iptc-22136-ea.
Повний текст джерелаXuan, Lingchao, Zhichuan Guan, Huaigang Hu, Jingjiao Li, and Bo Zhang. "The Principle and Application of a Novel Rotary Percussion Drilling Tool Drived by Positive Displacement Motor." In IADC/SPE Asia Pacific Drilling Technology Conference. Society of Petroleum Engineers, 2016. http://dx.doi.org/10.2118/180535-ms.
Повний текст джерелаTrivedi, A., J. De La Fuente Valadez, S. S. Kandala, A. Mai, R. J. Shor, and A. Vetsak. "Experimental Study for the Validation of Drilling Optimization Model for Improved Performance in Hard Rock Formations." In 56th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2022. http://dx.doi.org/10.56952/arma-2022-2178.
Повний текст джерелаHeinz, Heinrich K., Trempess Moore, and Simon Cullum-Kenyon. "Geotechnical Assessments for Trenchless Water Crossings in Alberta." In 2004 International Pipeline Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ipc2004-0608.
Повний текст джерела