Статті в журналах з теми "Roll-to-Roll Manufacturing Process"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Roll-to-Roll Manufacturing Process".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Lazarus, Nathan, and Gabriel L. Smith. "Laser Folding in a Roll-to-Roll Manufacturing Process." Lasers in Manufacturing and Materials Processing 5, no. 3 (July 7, 2018): 237–47. http://dx.doi.org/10.1007/s40516-018-0064-4.
Повний текст джерелаKodihalli Shivaprakash, Nischay, Jinde Zhang, Artee Panwar, Carol Barry, Quoc Truong, and Joey Mead. "Continuous manufacturing of reentrant structures via roll-to-roll process." Journal of Applied Polymer Science 136, no. 1 (September 23, 2018): 46980. http://dx.doi.org/10.1002/app.46980.
Повний текст джерелаWang, Xiaojia, HongMei Zang, and Peter Li. "48.5: Roll-to-Roll Manufacturing Process for Full Color Electrophoretic Film." SID Symposium Digest of Technical Papers 37, no. 1 (2006): 1587. http://dx.doi.org/10.1889/1.2433301.
Повний текст джерелаWang, Dongxiang, Jacqueline Hauptmann, and Christian May. "OLED Manufacturing on Flexible Substrates Towards Roll-to-Roll." MRS Advances 4, no. 24 (2019): 1367–75. http://dx.doi.org/10.1557/adv.2019.62.
Повний текст джерелаYu, Dan, Dirk Beckelmann, Michael Opsölder, Bruno Schäfer, Karsten Moh, René Hensel, Peter de Oliveira, and Eduard Arzt. "Roll-to-Roll Manufacturing of Micropatterned Adhesives by Template Compression." Materials 12, no. 1 (December 29, 2018): 97. http://dx.doi.org/10.3390/ma12010097.
Повний текст джерелаTahir, Usama, Jin Il Kim, Shama Javeed, Amin Khaliq, Jun-Hyun Kim, Doo-In Kim, and Myung Yung Jeong. "Process Optimization for Manufacturing Functional Nanosurfaces by Roll-to-Roll Nanoimprint Lithography." Nanomaterials 12, no. 3 (January 29, 2022): 480. http://dx.doi.org/10.3390/nano12030480.
Повний текст джерелаJo, Minho, Jongsu Lee, Seongyong Kim, Gyoujin Cho, Taik-Min Lee, and Changwoo Lee. "Web Unevenness Due to Thermal Deformation in the Roll-to-Roll Manufacturing Process." Applied Sciences 10, no. 23 (December 2, 2020): 8636. http://dx.doi.org/10.3390/app10238636.
Повний текст джерелаSmolka, Martin, Stephan Ruttloff, Dieter Nees, Christine Prietl, Valentin Satzinger, Bernhard Lamprecht, Philipp Hütter, et al. "High Throughput Roll-to-Roll Production of Microfluidic Chips." Proceedings 2, no. 13 (December 4, 2018): 1054. http://dx.doi.org/10.3390/proceedings2131054.
Повний текст джерелаWang, Min-Wen, Wei-Chuang Lin, and Ming-Hsiao Lee. "Fabrication of flexible microlens array film using roll-to-roll process." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227, no. 4 (April 2013): 543–50. http://dx.doi.org/10.1177/0954405413475940.
Повний текст джерелаLee, Jongsu, Junhyeon Byeon, and Changwoo Lee. "Theories and Control Technologies for Web Handling in the Roll-to-Roll Manufacturing Process." International Journal of Precision Engineering and Manufacturing-Green Technology 7, no. 2 (January 4, 2020): 525–44. http://dx.doi.org/10.1007/s40684-019-00185-3.
Повний текст джерелаNoh, Jaehyun, Minho Jo, Hojin Jeon, Minjae Kim, Jeongdai Jo, and Changwoo Lee. "Web Wrinkle Defects due to Temperature Profile in Roll-to-Roll Manufacturing Systems." Polymers 15, no. 2 (January 15, 2023): 457. http://dx.doi.org/10.3390/polym15020457.
Повний текст джерелаJou, Jwo-Huei, Snehasis Sahoo, Deepak Kumar Dubey, Rohit Ashok Kumar Yadav, Sujith Sudheendran Swayamprabha, and Sudam Dhudaku Chavhan. "Molecule-based monochromatic and polychromatic OLEDs with wet-process feasibility." Journal of Materials Chemistry C 6, no. 43 (2018): 11492–518. http://dx.doi.org/10.1039/c8tc04203a.
Повний текст джерелаTahir, Usama, Muhammad Ahmad Kamran, and Myung Yung Jeong. "Numerical Study on the Optimization of Roll-to-Roll Ultraviolet Imprint Lithography." Coatings 9, no. 9 (September 8, 2019): 573. http://dx.doi.org/10.3390/coatings9090573.
Повний текст джерелаShin, Jong Gye, Sun il Won, Cheol Ho Ryu, Hyunjune Yim, and Jang Hyun Lee. "Object-Oriented Development of an Integrated System for Manufacturing Information of Roll Bending Process." Journal of Ship Production 18, no. 02 (May 1, 2002): 86–91. http://dx.doi.org/10.5957/jsp.2002.18.2.86.
Повний текст джерелаBoutiette, Amber L., Cristoffer Toothaker, Bailey Corless, Chouaib Boukaftane, and Caitlin Howell. "3D printing direct to industrial roll-to-roll casting for fast prototyping of scalable microfluidic systems." PLOS ONE 15, no. 12 (December 28, 2020): e0244324. http://dx.doi.org/10.1371/journal.pone.0244324.
Повний текст джерелаJung, Jaehan. "Continuous manufacturing of 3D patterned hybrid film via a roll-to-roll process with UV curing." Modern Physics Letters B 34, no. 07n09 (March 16, 2020): 2040039. http://dx.doi.org/10.1142/s0217984920400394.
Повний текст джерелаGwag, Jin-Seog, In-Yung Han, Kwang-Soo Bae, Hong Choi, Kyunghwa Sohn, and Jae-Hoon Kim. "P-71: Substrate Adhesion Technique Using Thermosetting Resin to Apply Roll-to-Roll Process to Manufacturing of LCDs." SID Symposium Digest of Technical Papers 39, no. 1 (2008): 1454. http://dx.doi.org/10.1889/1.3069426.
Повний текст джерелаWatari, Hisaki, Ryoji Nakamura, R. Paisern, Nobuhio Koga, and Keith Davey. "Mechanical Properties and Metallurgical Qualities of Magnesium Alloy Sheets Manufactured by Twin-Roll Casting." Key Engineering Materials 345-346 (August 2007): 165–68. http://dx.doi.org/10.4028/www.scientific.net/kem.345-346.165.
Повний текст джерелаJung, Dong Won. "Quadrilateral Shape Rib Forming by Roll Forming Process." Applied Mechanics and Materials 878 (February 2018): 296–301. http://dx.doi.org/10.4028/www.scientific.net/amm.878.296.
Повний текст джерелаMuladi, Nandy, Kusnadi, and Asep Erik. "ESTIMATION OF HARD PLAIN RUBBER ROLL MANUFACTURING PROCESS TIME USING LINEAR REGRESSION METHOD." Jurnal Teknovasi 9, no. 01 (April 1, 2022): 1–18. http://dx.doi.org/10.55445/jt.v9i01.33.
Повний текст джерелаMuladi, Nandy, Kusnadi, and Asep Erik. "ESTIMATION OF HARD PLAIN RUBBER ROLL MANUFACTURING PROCESS TIME USING LINEAR REGRESSION METHOD." Jurnal Teknovasi 9, no. 01 (April 1, 2022): 1–18. http://dx.doi.org/10.55445/jt.v9i01.33.
Повний текст джерелаBurkitt, Daniel, Peter Greenwood, Katherine Hooper, David Richards, Vasil Stoichkov, David Beynon, Eifion Jewell, and Trystan Watson. "Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells." MRS Advances 4, no. 24 (2019): 1399–407. http://dx.doi.org/10.1557/adv.2019.79.
Повний текст джерелаSteinhoff, Bryan Dennis, James Dong, Olha Mashtalir, Ramin Amin-Sanayei, Kunlun Hong, and Jianlin Li. "(Invited) High Throughput Solvent-Free Manufacturing of Battery Electrodes." ECS Meeting Abstracts MA2022-02, no. 6 (October 9, 2022): 633. http://dx.doi.org/10.1149/ma2022-026633mtgabs.
Повний текст джерелаLee, Jongsu, and Changwoo Lee. "Improvement of a Splicing Machine to Decrease Abrupt Tension Changes and Tail Defects during the Roll Exchange Process in a Roll-to-Roll Manufacturing System." International Journal of Precision Engineering and Manufacturing 19, no. 8 (August 2018): 1155–61. http://dx.doi.org/10.1007/s12541-018-0136-6.
Повний текст джерелаFarhadipour, Pedram, M. Sedighi, and Mohammad Heydari vini. "Using warm accumulative roll bonding method to produce Al-Al2O3 metal matrix composite." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 5 (April 2017): 889–96. http://dx.doi.org/10.1177/0954405417703421.
Повний текст джерелаByon, Sang Min, Yong-Hoon Roh, Zhaorui Yang, and Youngseog Lee. "A roll-bending approach to suppress the edge cracking of silicon steel in the cold rolling process." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 1-2 (August 25, 2020): 112–24. http://dx.doi.org/10.1177/0954405420949221.
Повний текст джерелаGroche, Peter, and Michael Henkelmann. "Dimensional Deviation of Roll Formed Components Made of High Strength Steel." Key Engineering Materials 344 (July 2007): 285–92. http://dx.doi.org/10.4028/www.scientific.net/kem.344.285.
Повний текст джерелаCheng, Peifu, Nicole K. Moehring, Juan Carlos Idrobo, Ilia N. Ivanov, and Piran R. Kidambi. "Scalable synthesis of nanoporous atomically thin graphene membranes for dialysis and molecular separations via facile isopropanol-assisted hot lamination." Nanoscale 13, no. 5 (2021): 2825–37. http://dx.doi.org/10.1039/d0nr07384a.
Повний текст джерелаGroche, Peter, Christian Mueller, and Lars Baeumer. "Verification of Numerical Roll Forming Loads with the Aid of Measurement Equipment." Advanced Materials Research 939 (May 2014): 373–80. http://dx.doi.org/10.4028/www.scientific.net/amr.939.373.
Повний текст джерелаA. M., Tiara, Hyeokgyun Moon, Gyoujin Cho, and Jinkee Lee. "Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates." Japanese Journal of Applied Physics 61, SE (April 7, 2022): SE0802. http://dx.doi.org/10.35848/1347-4065/ac575e.
Повний текст джерелаQiao, Zheng, Da Qu, Huiming Wang, Dongxu Wu, and Bo Wang. "Experimental investigation of the influence of chip interference on burr height in machining micro V-grooves on electroplated copper roll die." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232, no. 8 (September 26, 2016): 1491–97. http://dx.doi.org/10.1177/0954405416668927.
Повний текст джерелаWatari, Hisaki, Yoshimasa Nishio, Ryoji Nakamura, Keith Davey, and Nobuhio Koga. "Microstructure and Mechanical Properties of High Aluminum Content Magnesium Alloys Fabricated by Twin-Roll Casting Process." Materials Science Forum 638-642 (January 2010): 1608–13. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.1608.
Повний текст джерелаPark, Janghoon, Keehyun Shin, and Changwoo Lee. "Optimized design for anti-reflection coating process in roll-to-roll slot-die coating system." Robotics and Computer-Integrated Manufacturing 30, no. 5 (October 2014): 432–41. http://dx.doi.org/10.1016/j.rcim.2014.02.001.
Повний текст джерелаHuang, Chia-Sheng, Heng-Tien Lin, Guo-Shing Huang, Je-Ping Hu, Su-Tsai Lu, C. T. Liu, Sean Garner, et al. "58.2:Distinguished Paper: Roll-to-roll Process on Ultra-thin Flexible Glass for Manufacturing the Multi-Touch Sensor Panel." SID Symposium Digest of Technical Papers 44, no. 1 (June 2013): 807–9. http://dx.doi.org/10.1002/j.2168-0159.2013.tb06339.x.
Повний текст джерелаWu, Qiang, Jim P. Zheng, Mary Hendrickson, and Edward J. Plichta. "Dry Process for Fabricating Low Cost and High Performance Electrode for Energy Storage Devices." MRS Advances 4, no. 15 (2019): 857–63. http://dx.doi.org/10.1557/adv.2019.29.
Повний текст джерелаMueller, Christian, Xun Gu, Lars Baeumer, and Peter Groche. "Influence of Friction on the Loads in a Roll Forming Simulation with Compliant Rolls." Key Engineering Materials 611-612 (May 2014): 436–43. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.436.
Повний текст джерелаYang, Sheng, Li Zhang, Hong Xu, and Li Wei Zhao. "Finite Element Analysis on the Roll Milling Process of Twisted Oblate Tube." Advanced Materials Research 97-101 (March 2010): 3065–69. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3065.
Повний текст джерелаLi, Yue, Shu Chen Yang, Mi Wang, and Guo Long Lu. "Elongation Rule of the Longitudinal Fiber of the Continuous Roll Forming Part." Materials Science Forum 921 (May 2018): 184–88. http://dx.doi.org/10.4028/www.scientific.net/msf.921.184.
Повний текст джерелаPeng, Wen Fang, Qiang Li, and Yu Yan. "FEA Analysis on 600MPa TRIP Steel Variable Section Roll Forming with Protrusion and Hole." Advanced Materials Research 457-458 (January 2012): 299–303. http://dx.doi.org/10.4028/www.scientific.net/amr.457-458.299.
Повний текст джерелаAbrass, Ahmad, Thomas Kessler, and Peter Groche. "Optimizing Roll Forming Processes with the Aid of a New Numerical Algorithm." Key Engineering Materials 504-506 (February 2012): 857–62. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.857.
Повний текст джерелаRAUSCHER, BORIS, MICHAEL TROMPETER, and A. ERMAN TEKKAYA. "MANUFACTURING AND FORMING OF PARTIALLY CLADDED DOUBLE BLANKS." Journal of Advanced Manufacturing Systems 07, no. 01 (June 2008): 33–36. http://dx.doi.org/10.1142/s0219686708001048.
Повний текст джерелаGuo, Remn-Min. "Prediction of Strip Profile in Rolling Process Using Influence Coefficients and Boussinesq’s Equations." Journal of Manufacturing Science and Engineering 119, no. 2 (May 1, 1997): 220–26. http://dx.doi.org/10.1115/1.2831098.
Повний текст джерелаRen, Y., J. Dong, Y. Sun, A. Sedlmaier, Q. Guo, D. Zhang, and J. Yang. "Digitization of roll forming and its application." IOP Conference Series: Materials Science and Engineering 1270, no. 1 (December 1, 2022): 012010. http://dx.doi.org/10.1088/1757-899x/1270/1/012010.
Повний текст джерелаGünther, Till, Nicolas Billot, Jörg Schuster, Joscha Schnell, Franz Benjamin Spingler, and Hubert A. Gasteiger. "The Manufacturing of Electrodes: Key Process for the Future Success of Lithium-Ion Batteries." Advanced Materials Research 1140 (August 2016): 304–11. http://dx.doi.org/10.4028/www.scientific.net/amr.1140.304.
Повний текст джерелаGiorleo, Luca, Elisabetta Ceretti, and Claudio Giardini. "Speed Idle Roll Law Optimization in a Ring Rolling Process." Key Engineering Materials 651-653 (July 2015): 248–53. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.248.
Повний текст джерелаNijman, Gerard. "A Fundamental Approach of the Cord Calendering Process." Rubber Chemistry and Technology 74, no. 4 (September 1, 2001): 715–28. http://dx.doi.org/10.5254/1.3544969.
Повний текст джерелаAdeyemi, GJ, RS Dwyer-Joyce, C. Pinna, A. Hunter, JT Stephen, and A. Adebayo. "Non-intrusive measurement of strip thickness and roll-bite length in metal rolling." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, no. 10 (May 1, 2020): 1283–92. http://dx.doi.org/10.1177/0954405420915037.
Повний текст джерелаHuang, Guang Sheng, Ling Yun Wang, Zhong Wei Zhang, Guang Jie Huang, and Fu Sheng Pan. "Manufacturing Technique of Magnesium Alloy Sheets by Powder Rolling." Materials Science Forum 488-489 (July 2005): 445–48. http://dx.doi.org/10.4028/www.scientific.net/msf.488-489.445.
Повний текст джерелаJansson, E., A. Korhonen, M. Hietala, and T. Kololuoma. "Development of a full roll-to-roll manufacturing process of through-substrate vias with stretchable substrates enabling double-sided wearable electronics." International Journal of Advanced Manufacturing Technology 111, no. 11-12 (November 6, 2020): 3017–27. http://dx.doi.org/10.1007/s00170-020-06324-4.
Повний текст джерелаMoon, C. H., and Y. Lee. "Methodology for draft schedule design of plate rolling process with peening effect considered." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223, no. 9 (May 6, 2009): 1159–69. http://dx.doi.org/10.1243/09544054jem1417.
Повний текст джерела