Книги з теми "Rocket engine nozzle"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-37 книг для дослідження на тему "Rocket engine nozzle".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте книги для різних дисциплін та оформлюйте правильно вашу бібліографію.
United States. National Aeronautics and Space Administration., ed. Comparison of two procedures for predicting rocket engine nozzle performance. [Washington, DC]: National Aeronautics and Space Administration, 1987.
Знайти повний текст джерелаMarable, R. W. Design, fabrication, and test of the RL10 derivative II chamber/primary nozzle. [West Palm Beach, Fla: Pratt and Whitney Aircraft, 1989.
Знайти повний текст джерелаLeonard, Schoenman, and United States. National Aeronautics and Space Administration., eds. Advanced small rocket chambers option 3: 110 1bf Ir-Re rocket. [Washington, DC]: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаJ, Sovie Amy, Haag Thomas W, and United States. National Aeronautics and Space Administration., eds. Arcjet nozzle design impacts. [Washington, DC]: National Aeronautics and Space Administration, 1989.
Знайти повний текст джерелаMilton, Lamb, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Aeropropulsive characteristics of isolated combined turbojet/ramjet nozzles at Mach numbers from 0 to 1.20. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.
Знайти повний текст джерелаM, Kim Y., Shang H. M, and United States. National Aeronautics and Space Administration., eds. Turbulence modelling of flow fields in thrust chambers: Final technical report for the period June 10, 1991 through September 13, 1992. [Huntsville, Ala.]: Research Institute, the University of Alabama in Huntsville, 1993.
Знайти повний текст джерелаM, Kim Y., Shang H. M, and United States. National Aeronautics and Space Administration., eds. Turbulence modelling of flow fields in thrust chambers: Final technical report for the period June 10, 1991 through September 13, 1992. [Huntsville, Ala.]: Research Institute, the University of Alabama in Huntsville, 1993.
Знайти повний текст джерелаJ, Pavli Albert, Kacynski Kenneth J, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Office., eds. Comparison of theoretical and experimental thrust performance of a 1030:1 area ratio rocket nozzle at a chamber pressure of 2413 kN/m℗ø(350 psia). [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Office, 1987.
Знайти повний текст джерелаGeorge C. Marshall Space Flight Center., ed. Flight motor set 360H005 (STS-28R). Brigham City, UT: Thiokol Corp., Space Operations, 1990.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Calculation of propulsive nozzle flowfields in multidiffusing chemically recating environments. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаJankowsky, Robert S. Experimental performance of a high-area-ratio rocket nozzle at high combustion chamber pressure. [Cleveland, Ohio]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.
Знайти повний текст джерелаD, Leavitt Laurence, та United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ред. Static internal performance of single-expansion-ramp nozzles with thrust-vectoring capability up to 60ʻ́. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.
Знайти повний текст джерелаTurchi, Peter J. The effects of magnetic nozzle configurations on plasma thrusters: Final report, grant/contract no.: NAG3-843. [Washington, DC: National Aeronautics and Space Administration, 1997.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Heat transfer in rocket engine combustion chambers and regeneratively cooled nozzles: Final report. Huntsville, AL: SECA, Inc., 1993.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Heat transfer in rocket engine combustion chambers and regeneratively cooled nozzles: Final report. Huntsville, AL: SECA, Inc., 1993.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ed. Pocketing mechanics of SRM nozzle liner. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.
Знайти повний текст джерелаQuentmeyer, Richard J. Hot-gas-side heat transfer characteristics of subscale, plug-nozzle rocket calorimeter chamber. Cleveland, Ohio: Lewis Research Center, 1993.
Знайти повний текст джерелаA, Roncace Elizabeth, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Hot-gas-side heat transfer characteristics of subscale, plug-nozzle rocket calorimeter chamber. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.
Знайти повний текст джерелаWilliam, Hall, and United States. National Aeronautics and Space Administration., eds. Proceedings: Nozzle Initiative Industry Advisory Committee on Standardization of Carbon-Phenolic Test Methods and Specifications held at Aerojet, Sacramento, California, November 14-15, 1991. [Washington, DC: National Aeronautics and Space Administration, 1991.
Знайти повний текст джерелаCook, M. Shelf life extension for the lot AAE nozzle severance LSCs: Final test report. Brigham City, UT: Thiokol Corp., Space Operations, 1990.
Знайти повний текст джерелаJankovsky, Robert S. High-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаD, Smith Timothy, Pavli Albert J, and NASA Glenn Research Center, eds. High-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаD, Smith Timothy, Pavli Albert J, and NASA Glenn Research Center, eds. High-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаD, Smith Timothy, Pavli Albert J, and NASA Glenn Research Center, eds. High-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаJian-Shun, Shuen, and United States. National Aeronautics and Space Administration., eds. A numerical study of chemically reacting flow in nozzles. [Washington, DC]: National Aeronautics and Space Administration, 1989.
Знайти повний текст джерела1934-, Hoffman Joe D., and United States. National Aeronautics and Space Administration., eds. The prediction of nozzle performance and heat transfer in hydrogen/oxygen rocket engines with transpiration cooling, film cooling, and high area ratios. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерела1934-, Hoffman Joe D., and United States. National Aeronautics and Space Administration., eds. The prediction of nozzle performance and heat transfer in hydrogen/oxygen rocket engines with transpiration cooling, film cooling, and high area ratios. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаKopp, Robert William. Determination of the velocity, density, mass flux and enthalpy profiles for very high temperature arc jet nozzle flow. Monterey, Calif: Naval Postgraduate School, 1989.
Знайти повний текст джерелаOperations, Thiokol Corporation Space, and George C. Marshall Space Flight Center., eds. Flight motor set 360L002 (STS-27R).: Final report. Brigham City, UT: Thiokol Corp., Space Operations, 1989.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Evaluation of coated columbium test panels having application to a secondary nozzle extension for the RL10 rocket engine system: Parts I and II : final report. 1989.
Знайти повний текст джерелаCalculation of propulsive nozzle flowfields in multidiffusing chemically recating environments. [Washington, DC]: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаHeat transfer in rocket engine combustion chambers and regeneratively cooled nozzles. Huntsville, AL: SECA, Inc., 1993.
Знайти повний текст джерелаHeat transfer in rocket engine combustion chambers and regeneratively cooled nozzles. Huntsville, AL: SECA, Inc., 1993.
Знайти повний текст джерелаEscudier, Marcel. Engineering applications of the linear momentum equation. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198719878.003.0010.
Повний текст джерелаHigh-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаComparison of response surface and kriging models in the multidisciplinary design of an aerospike nozzle. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1998.
Знайти повний текст джерелаEscudier, Marcel. Introduction to Engineering Fluid Mechanics. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198719878.001.0001.
Повний текст джерела