Дисертації з теми "Rings Design and construction"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Rings Design and construction".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Perdue, Clinton L. "Design and Construction of Controls for a Kv/Mva Class Power Electronics Testing Facility." Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/35138.
Повний текст джерелаMaster of Science
Hughes, Cale B. "Design and construction of multi-variable vortex-ring bubble generator for use in interactive exhibit." Thesis, Monterey, California: Naval Postgraduate School, 2013. http://hdl.handle.net/10945/38950.
Повний текст джерелаThe ultimate consequence of the current shortfall of students seeking higher education in the fields of science, technology, engineering and mathematics (STEM) is a lack of technical professionals trained to operate and maintain complex weapon systems crucial to the defense of this nation. A hands-on interactive exhibit able to capture the imagination and ignite curiosity is a powerful tool to advance the strategic goal of raising the number of students studying these disciplines. Vortex rings are a naturally occurring phenomenon that provides a medium for capturing the attention while providing the opportunity to teach complex subjects related to stable and unstable equilibrium, stochastic systems, and conservation laws. The diaphragm valve designed in this thesis provides the centerpiece for such an exhibition. The valve is capable of producing a broad range of vortex-ring bubbles through adjustment of three variables. The seal pressure, actuating pressure, and cycle time of the triggering solenoid valve each contribute to the type and quality of bubble produced. The behavior of the device through a select range of parameters is presented and future work to produce a fully interactive exhibit is discussed, to include mechanical design, electronic circuitry, and micro-controller coding.
Sun, Wei-Yang. "Design and construction of rigs for studying surface condensation and creating anodized metal oxide surfaces." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68860.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 45-46).
This thesis details the design and construction of a rig for studying surface condensation and a rig for creating anodized metal oxides (AMOs). The condensation rig characterizes condensation for different surfaces; this is done with the use of known heat transfer principles to calculate characteristic heat fluxes and heat transfer coefficient values. Preliminary results have been shown to follow predictions derived from existing heat transfer principles, and have confirmed existing literature's assertion of increased effectiveness of dropwise condensation over filmwise condensation. The AMO rig fabricates anodized metal oxide surface samples by subjecting wafers coated with thin metal layers to voltage in the presence of acidic electrolytes. Initial fabricated anodized aluminum oxide (AAO) samples have shown to display the characteristic hierarchal nanopore structure of known fabricated AAO in literature. Both the condensation rig and the AMO rig will be used in current and future condensation and superhydrophobic surface research by the Varanasi group in the MIT Department of Mechanical Engineering.
by Wei-Yang Sun.
S.B.
Martin, William H. C. "Rapid construction of highly functionalised pyran rings." Thesis, University of Nottingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.415405.
Повний текст джерелаBanjoko, Oluwakemi O. "A novel cyclization in the construction of fused rings." Thesis, University of Sussex, 2011. http://sro.sussex.ac.uk/id/eprint/6894/.
Повний текст джерелаFortz, Bernard. "Design of survivable networks with bounded rings." Doctoral thesis, Universite Libre de Bruxelles, 1998. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/212005.
Повний текст джерелаXin, Hua (Composer). "Evocative Foreshadowing: The Motivic Construction in "The Legend of Two Rings"." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011770/.
Повний текст джерелаHolovchanska, Yevheniia, Tatiana Kucher, and Maryna Kolosnichenko. "Research of design features of memento mori rings." Thesis, Institutul Patrimoniului Cultural, 2021. https://er.knutd.edu.ua/handle/123456789/19008.
Повний текст джерелаТема пам'яті та скорботи простежується в ювелірному мистецтві ще з часів Античності і мала декілька значень: романтичний (поки смерть не розлучить нас), траурний (в пам'ять про померлого), філософський (memento mori, пам’ятай про смерть). Такий вид перснів досі виконує роль пам’ятного елементу смерті в племенах Африки, в Мексиці, в субкультурах готів і панків. В роботі досліджено особливості дизайну перстнів memento mori від часів Античності до ХІХ ст.
Westerhoff, Kevin M. (Kevin Matthew) 1978. "Construction based design." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84827.
Повний текст джерелаSkytte, af Sätra Ulf. "Wear of piston rings in hydrostatic transmissions." Doctoral thesis, KTH, Machine Design (Div.), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-432.
Повний текст джерелаThis study focuses on the wear of piston rings in a hydraulic radial piston motor. The piston ring has to satisfy increasing demands for reliability and longer service life. It has two contacting surfaces, the face and the flank, and operates under a boundary lubrication state.
This first part of the project aimed to detect and characterise piston ring wear. Measurement by weighing gives an overall value for wear defined as loss of mass. Two-dimensional form and surface roughness measurements show the distribution of wear on the piston ring face in contact with the cylinder bore and the piston ring flank in contact with the piston groove. Three-dimensional analyses, both quantitative and qualitative, allow the wear mechanisms to be identified.
The wear of piston rings from an actual hydraulic motor was characterised. As well, rig testing was performed in two different test rig set-ups, one simulating the sliding movement of the piston ring and the other the tilting movement at the end of the strokes. Wear during the running-in period was investigated, and the findings indicate that the period when this takes place is of short duration. In the long term, mild wear makes the surfaces smoother than they were when new, resulting in a very low wear coefficient. Significant levels of wear were measured on both contacting surfaces of the piston ring. In cases in which the flank exhibits more wear than the face, the wear on the flank can be reduced by proper design of the piston groove.
The second part of the project aimed to evaluate use of a textured surface for the cylinder bore counter surface and a coated surface for the piston ring. Three modelling experiments were performed to characterise the friction and wear properties under lean boundary lubrication conditions. Under such conditions, textured surfaces have the advantage of retaining more lubricant and supplying it over a longer time. Stable friction was also a distinctive feature of the textured surface. Use of a coating could also possibly reduce the amount of wear. Though a smooth surface, like a polished one, is hard to beat for a working texture, a coated surface is far ahead of a smooth uncoated one. Different manufactured and commonly used cylinder bore surfaces, including textured ones, were evaluated in the sliding movement test rig. That allowed favourable wear properties, such as lowest wear coefficient, to be determined with the use of a roller burnished surface.
A final part of the research involved simulating wear on the piston ring face throughout the entire service life of a hydraulic motor. This allowed us to determine the roles of surface roughness and coating in prolonging service life and achieving acceptable and secure piston ring operation. The model is simple and realistic, but still needs to be refined so as to correspond even better to reality.
Xie, Xiaoling. "Communications in construction design." Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/7571.
Повний текст джерелаCalleja, Ramos Pilar. "Gold-Catalyzed Synthesis of 5 and 6-Membered Rings for the Construction of Molecular Diversity." Doctoral thesis, Universitat Rovira i Virgili, 2017. http://hdl.handle.net/10803/440511.
Повний текст джерелаLa investigación desarrollada en esta tesis doctoral abarca desde la síntesis de compuestos poliaromáticos hasta la preparación de varios compuestos naturales, destacando la habilidad de la catálisis homogénea de oro para la construcción de diversidad molecular. Por una parte, se ha desarrollado un nuevo procedimiento para la síntesis de un nuevo fullereno C60 abierto mediante un triple acoplamiento catalizado con Pd de cuatro fragmentos de trindeno C15. El esqueleto del motivo central trindeno C15 se construyó mediante una triple ciclación oxidante catalizada por oro(I). Por otra parte, el alcance de la reacción intramolecular de cicloadición [2 + 2 + 2] catalizada por oro(I) se extendió a oxo-1,5-eninos con grupos O-homopropargílico y alílico protegidos. Usando las condiciones de reacción optimizadas, la ciclación tiene lugar con rendimientos de moderados a excelentes (38-90%) y una mayor selectividad en la mayoría de los casos, proporcionando acceso a octahidro-1H-indenos sustituidos. En cuanto al uso de la catálisis del oro para la síntesis de productos naturales, se ha desarrollado una reacción enantioselectiva de alcoxiciclación, que puede ser aplicada en la construcción del esqueleto principal de los carexanos. Además, se ha utilizado la reacción de cicloadición intramolecular [4 + 2] catalizada por oro(I) para la formación del esqueleto 6,6,5-tricíclico de las pycnanthuquinonas, otra familia de alcaloides. Por último, se realizó un estudio mecanístico detallado de las transposiciones de esqueleto en diversos 1,6-eninos con grupos OR en la posición propargílica, los cuales son propensos a experimentar una migración-1,5 del grupo alcoxi- en ausencia de nucleófilos al ser tratados con catalizadores de otro.
The research developed in this Doctoral Thesis comprises from the synthesis of polyaromatic compounds to the preparation of various naturally occurring quinonoid compounds (natural product synthesis), highlighting the proficiency of homogeneous gold catalysis for the construction of molecular diversity. On the one hand, a novel approach for the synthesis of a new crushed fullerene C60 by a threefold Pd-catalyzed cross-coupling of four C15 trindene fragments has been developed. The central motif’s trindene C15 skeleton was constructed through a triple gold(I)-catalyzed oxidative cyclization. On the other hand, the scope of the intramolecular gold(I)-catalyzed [2+2+2] cycloaddition reaction was extended to O-protected homopropargylic and allylic oxo-1,5-enynes. Under the optimized reaction conditions, the cyclization takes place with moderate to excellent yields (38–90%) and increased selectivity in most of the cases, providing access to substituted octahydro-1H-indenes. Concerning the use of gold catalysis for the synthesis of natural products, we have developed an enantioselective gold(I)-catalyzed enyne alkoxycyclization, which can be applied for the construction of the carexanes core skeleton. Additionally, the intramolecular gold(I)-catalyzed [4+2] cycloaddition reaction has been used for the construction of the 6,6,5-tricyclic skeleton of the pycnanthuquinones, another family of alkaloids. Finally, a detailed examination of gold(I)-catalyzed skeletal rearrangements of model 1,6-enynes bearing OR groups at the propargyl position, which are prone to undergo intramolecular 1,5-migration in the absence of external nucleophiles, was performed.
Soto, Leticia S. M. Massachusetts Institute of Technology. "Construction design as a process for flow : applying lean principles to construction design." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42995.
Повний текст джерелаIncludes bibliographical references (p. 108-111).
Delays and cost overruns are the rule rather than the exception in the construction industry. Design changes due to lack of constructability late in the construction phase generating costly ripple effect which create delay and disruption throughout the entire organization, are the largest contributors to the stated rule. In the building construction industry, of increased competitiveness, demand from many companies continued effort to develop new methods and tools, in which the design for quality, cost, construability and reliability play an important role. The planning and management of building design has historically focused upon traditional methods of planning such as Critical Path Method (CPM). Little effort is made to understand the complexities of the design process; instead design managers focus on allocating work packages where the planned output is a set of deliverables. This current design method forces design teams to manage their work on a discipline basis, each working on achieving their deliverable as dictated by the design program with little regard of the relationship with other disciplines and organizations. In addition, because Architect and Engineering firms view design and construction as two separate independent phases of work in project it makes it difficult to verify constructability in a design and create flow in the overall process. The goal of this study is to look at how aligning interests, objectives and practices based on lean fundamentals, during the earliest stages of a project, as a method of improving construction performance.
by Leticia Soto.
S.M.
Dutilleul, Pierre, and Claudine Till. "Detection of Atypical Years in the Tree-Ring Series by Construction of a Temporal Walk in the Principal Components Planes." Tree-Ring Society, 1989. http://hdl.handle.net/10150/261884.
Повний текст джерелаSebille, Michel. "Design :construction, automorphisms and colourings." Doctoral thesis, Universite Libre de Bruxelles, 2002. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/211428.
Повний текст джерелаChew, En Phin. "Superconducting Transformer Design and Construction." Thesis, University of Canterbury. Electrical and Computer Engineering, 2010. http://hdl.handle.net/10092/4977.
Повний текст джерелаLeung, Chi-ming. "Design consultancy vs design and build consultancy : present trends in the construction industry /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038869.
Повний текст джерелаHarley, Grant L., Henri D. Grissino-Mayer, Lisa B. LaForest, and Patrick McCauley. "Dendrochronological Dating Of The Lund-Spathelf House, Ann Arbor, Michigan, USA." Tree-Ring Society, 2011. http://hdl.handle.net/10150/622642.
Повний текст джерелаFerguson, A. J. L. "Dilution refrigerator : Design, construction and performance." Thesis, University of Ulster, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378638.
Повний текст джерелаBatzer, Rachel E. (Rachel Elizabeth). "Design and construction of a dynamometer." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68827.
Повний текст джерела"June 2011." Cataloged from PDF version of thesis.
Includes bibliographical references (p. 20).
Access to a dynamometer is a useful tool for any electrical system where the motors must be selected from various suppliers and fully characterized. Motor suppliers usually provide a torque, speed, efficiency curve, but it frequently lacks complete motor characterization and includes motor controller losses in the total system loss. The dynamometer presented in this thesis is primarily designed for testing of high efficiency motors and motor controllers in the power and speed range requires for competition in the World Solar Challenge, a transcontinental race for solar electric vehicles. The testing specifications of a solar electric vehicles are uncommon among motor testing needs because it requires high torque, low power, high efficiency, and the only a small operating range. This thesis covers the design and construction of the dynamometer.
by Rachel E. Batzer.
S.B.
Bibby, Lee. "Improving design management techniques in construction." Thesis, Loughborough University, 2003. https://dspace.lboro.ac.uk/2134/793.
Повний текст джерелаJeffries, James R. "Construction implications of photolithography equipment design /." May be available electronically:, 2007. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.
Повний текст джерелаTisaj, David. "Design and construction of a tachometer." Thesis, Tisaj, David (2014) Design and construction of a tachometer. Other thesis, Murdoch University, 2014. https://researchrepository.murdoch.edu.au/id/eprint/25564/.
Повний текст джерелаAjayi, Saheed O. "Design, procurement and construction strategies for minimizing waste in construction projects." Thesis, University of the West of England, Bristol, 2017. http://eprints.uwe.ac.uk/30123/.
Повний текст джерелаRobichaud, André, and Colin P. Laroque. "Dendroarchaeology In Southwestern Nova Scotia And The Construction Of A Regional Red Spruce Chronology." Tree-Ring Society, 2008. http://hdl.handle.net/10150/622567.
Повний текст джерелаPetras, James P. "Prefabrication and the Construction Industry: An Examination of Design, Construction, and Efficiency." University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1277120331.
Повний текст джерелаRoth, Fabian. "Explicit design, and adaptation in self-construction /." Zürich : ETH, 2007. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=17005.
Повний текст джерелаRehnberg, Adam. "Suspension design for off-road construction machines." Doctoral thesis, KTH, Fordonsdynamik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-33883.
Повний текст джерелаQC 20110531
Law, Gordon Ki-Wai. "Decision support system for construction cycle design." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26715.
Повний текст джерелаApplied Science, Faculty of
Civil Engineering, Department of
Graduate
Morris, Jonathan. "Improving construction design : the lean thinking paradigm." Thesis, Cranfield University, 1999. http://dspace.lib.cranfield.ac.uk/handle/1826/3840.
Повний текст джерелаBrouqueyre, Laurent. "Hydro-acoustic therapy : design, construction and testing." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18215.
Повний текст джерелаBogdanov, Anton. "Design and construction of widebeam riometer system." Thesis, Lancaster University, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.588505.
Повний текст джерелаYung, Keung-Shing, and 翁強盛. "Piling design and construction in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B4257609X.
Повний текст джерелаRobinson, Adrian C. "ISBU modular construction and building design prototypes." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/27480.
Повний текст джерелаDias, Jay D. "Design, Construction, and Optimization of Microprobe Beamlines." Thesis, University of Louisiana at Lafayette, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10812789.
Повний текст джерелаA new external microprobe beamline for irradiation experiments has been commissioned and constructed at the Louisiana Accelerator Center. This microprobe was designed to use the Oxford Triplet lens con?guration with no scanning system. The beamline was designed to allow for the post focus expansion of the ion beam to create an even ?led of current distribution at a sample. The samples are irradiated in air in a glove box so that a Biosaftey-Level 2 (BSL-2) environment is created, reducing risk of contamination for biological sample irradiation. The nature of a microprobe allows the ?ux, and therefore the dose, to be su?ciently low for space radiation studies. The beamline was designed using WinTRAX [18] and constriction has been completed. This thesis is an overview of what a microprobe is, how the new microprobe was designed, and how the beamline was constricted.
Wu, Berlin. "Geotechnical design and construction automation in Taiwan." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/41353.
Повний текст джерелаJackowski, Zachary John. "Design and construction of an autonomous ornithopter." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/52809.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Page no. "2" in pagination repeated twice. Cataloged from student submitted PDF version of thesis.
Includes bibliographical references (p. 56-57 [i.e. 57-58]).
In recent years the subject of flying vehicles propelled by flapping wings, also known as ornithopters, has been an area of interest because of its application to micro aerial vehicles (MAVs). These miniature vehicles seek to mimic small birds and insects to achieve never before seen agility in flight. This renewed interest has raised a host of new problems in vehicle dynamics and control to explore. In order to better study the control of flapping wing flight we have developed a large scale ornithopter called the Phoenix. It is capable of carrying a heavy (400 gram) computer and sensor package and is designed specially for the application of controls research. The design takes special care to optimize payload capacity, crash survivability, and field repair abilities. This thesis covers the design process of both the mechanical and electrical systems of the ornithopter and initial control experiments. We also show that it is possible to stabilize the machine in pitch with a simple PD controller through experimental testing..
by Zachary John Jackowski.
S.B.
Fang, Rosemarie. "The design and construction of fabric structures." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/51577.
Повний текст джерелаIncludes bibliographical references (leaves 46-47).
In its short history, fabric structures have fascinated architects and engineers alike. Architects appreciate their unusual shapes and forms while engineers delight in their "pure" structural expression. Capable of spanning large distances while incurring very little weight on supporting structure, developments in the design of fabric structure can dramatically change the ways in which permanent building construction is conceptualized. This thesis reviews the most current methods for design and construction of fabric structures and focuses on how they can be improved for common application as permanent structures. In doing so, it begins with a brief history and explanation of the various types of fabric structure that have previously been built. Subsequent chapters address different limiting factors, including the development of fabric materials, computational analysis methods, and innovative construction techniques. Finally, a case study of the new Landside Airport Terminal project in Denver, Colorado is presented to illustrate a direct application of design and construction methods. Though fabric structures have come a long way since the first modern cable-net was built fifty years ago, there are still several challenges to be overcome before fabric can be considered a viable option for the majority of new building projects.
by Rosemarie Fang.
M.Eng.
Hopper, Amanda Jane. "Landfill design, construction and non-invasive monitoring." Thesis, University of Plymouth, 1998. http://hdl.handle.net/10026.1/1989.
Повний текст джерелаBostanci, Sevket Can. "Low carbon sustainable concrete design and construction." Thesis, Kingston University, 2015. http://eprints.kingston.ac.uk/34545/.
Повний текст джерелаHansson, Johan, and Christian Bothén. "Design and construction of electronic control unit." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-353124.
Повний текст джерелаAhlbäck, Moa. "Integrerade arbetsmetoder med Virtual Design and Construction." Thesis, KTH, Fastigheter och byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231601.
Повний текст джерелаVirtual Design and Construction (VDC) was introduced early in the 21st century in order to encourage work with computer based models and construction planning in the design phase. VDC is a concept that has been embraced by several construction and consulting companies in order to develop their work with Building Information Model (BIM), innovations and cooperation within construction projects. VDC is a concept that keeps evolving and is being redefined by individuals and companies. This has contributed to a conceptual confusion within the construction sector about the definition of VDC. Furthermore, construction projects tend to be fragmented with project members that are working in silos and primarily focusing on their own discipline. In order to decrease the fragmentation within construction projects integrated working methods can be applied. Therefor the purpose of this master thesis is to explore the concept VDC and how it can stimulate integrated working methods. The study is examined using qualitative methods based on scientific literature and an interview study. The scientific literature is defining VDC conceptually and two integrated working methods Integrated Concurrent Engineering (ICE) and Integrated Project Delivery (IPD). Furthermore, the interview study includes respondents from the construction industry whose reflections and thoughts about the subject are being presented. The study is geographically limited to Sweden. The result shows the current ambiguity of how VDC is defined. In order to avoid a conceptual confusion a common definition should be formulated with national guidelines that describe how work with VDC should be conducted. Furthermore, VDC can stimulate an integrated approach through increased cohesion within construction projects, including common objectives within the project and joint problem solving between project members.
Jones, Andrew M. "Design and construction for traditional house building." Thesis, Aston University, 1990. http://publications.aston.ac.uk/14272/.
Повний текст джерелаLenski, Philipp. "Design, Construction and Operation of a Pentacopter." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-64370.
Повний текст джерелаYung, Keung-Shing. "Piling design and construction in Hong Kong." Click to view the E-thesis via HKUTO, 2001. http://sunzi.lib.hku.hk/hkuto/record/B4257609X.
Повний текст джерелаGhalandar, Zehi Jalalabad Toomaj. "Design Quality in Architecture and Construction Research." Thesis, KTH, Fastigheter och byggande, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254838.
Повний текст джерелаFrågan om designkvalitet i byggprojekt har länge varit ett stort bekymmer för designers (Gannet al. 2003). Betoningen på förbättring av processer inom konstruktion för att hantera ellerminska ”kostnad, tid och slöseri” i projekt har ibland lett till en oro för att utformning ochdesign av en byggnad kan bli av mindre betydelse på grund av sådana processförbättrandeåtgärder (Gann et al. 2003, p.319) ”Designkvalité” i arkitektur och konstruktion är ett tvetydigtoch ”dynamiskt koncept” i förhållande till sitt sammanhang, som ständigt genomgårförändringar (Rönn 2010, s.48; Slaughter 2004).Kvalité i sig är relaterad till värde och flera definitioner av det (Rönn 2010). Det är ofta möjligtför både människor och yrkesverksamma att känna och uppleva designkvalité i byggnaderganska intuitivt, men att rama in den på ett igenkännbart sätt har visat sig utmanande (Rönn2010). I huvudsak påverkas det mänskliga beteendet utöver den fysiska miljön även av densociala kontexten som finns inom den fysiska miljön (Vischer 2008).Dessa utmaningar sträcker sig vidare till bedömning, värdering och mätning av designkvalitéeroch fastställande av relevanta kriterier för dem (Rönn 2010, Slaughter 2004). Därför är detsvårt för byggnadsdesigners att konstruera designlösningar som garanterat kan uppnå ett sådanttvetydigt koncept (Rönn 2010).
Bacher, Denise. "Design patterns in level design common practices in simulated environment construction /." [Ames, Iowa : Iowa State University], 2008.
Знайти повний текст джерелаFox, Stephen John. "Application of design for manufacture principles to building design and construction." Thesis, Sheffield Hallam University, 2001. http://shura.shu.ac.uk/19207/.
Повний текст джерелаBaldev, Darshan H. "Design of a Construction Safety Training System using Contextual Design Methodology." Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/35200.
Повний текст джерелаMaster of Science
Beg, Zeshawn Afsari. "Complexity, Contract Design and Incentive Design in the Construction Management Industry." Thesis, Harvard University, 2015. http://nrs.harvard.edu/urn-3:HUL.InstRepos:16881896.
Повний текст джерела