Статті в журналах з теми "Resine transfer moulding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Resine transfer moulding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Robertson, Frank C. "Resin transfer moulding of aerospace resins—a review." British Polymer Journal 20, no. 5 (1988): 417–29. http://dx.doi.org/10.1002/pi.4980200506.
Johnson, M. S., C. D. Rudd, and D. J. Hill. "Microwave assisted resin transfer moulding." Composites Part A: Applied Science and Manufacturing 29, no. 1-2 (January 1998): 71–86. http://dx.doi.org/10.1016/s1359-835x(97)00043-2.
Szabo, J. S., G. Romhany, T. Czigany, and J. Karger-Kocsis. "Interpenetrating Vinylester/Epoxy Resins Reinforced by Flax Fibre Mat." Advanced Composites Letters 12, no. 3 (May 2003): 096369350301200. http://dx.doi.org/10.1177/096369350301200304.
Bodaghi, Masoud, Pavel Simacek, Suresh G. Advani, and Nuno C. Correia. "A model for fibre washout during high injection pressure resin transfer moulding." Journal of Reinforced Plastics and Composites 37, no. 13 (March 29, 2018): 865–76. http://dx.doi.org/10.1177/0731684418765968.
Johnson, M. S., C. D. Rudd, and D. J. Hill. "Cycle Time Reductions in Resin Transfer Moulding Using Microwave Preheating." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 209, no. 6 (December 1995): 443–53. http://dx.doi.org/10.1243/pime_proc_1995_209_108_02.
Pantelelis, Nikos G. "Optimised cure cycles for resin transfer moulding." Composites Science and Technology 63, no. 2 (February 2003): 249–64. http://dx.doi.org/10.1016/s0266-3538(02)00196-3.
Kendall, K. N., C. D. Rudd, M. J. Owen, and V. Middleton. "Characterization of the resin transfer moulding process." Composites Manufacturing 3, no. 4 (January 1992): 235–49. http://dx.doi.org/10.1016/0956-7143(92)90111-7.
Ruiz, Edu, Francois Trochu, and Raymond Gauvin. "Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM." Advanced Composites Letters 13, no. 1 (January 2004): 096369350401300. http://dx.doi.org/10.1177/096369350401300105.
Chai, Boon Xian, Jinze Wang, Thanh Kim Mai Dang, Mostafa Nikzad, Boris Eisenbart, and Bronwyn Fox. "Comprehensive Composite Mould Filling Pattern Dataset for Process Modelling and Prediction." Journal of Composites Science 8, no. 4 (April 18, 2024): 153. http://dx.doi.org/10.3390/jcs8040153.
Pickard, Laura Rhian, Joel Crinson, Nicolas Darras, Giuliano Allegri, and Michael R. Wisnom. "Evaluation of manufacturing methods for pultruded rod-based hierarchical composite structural members with minimal porosity." Plastics, Rubber and Composites: Macromolecular Engineering 53, no. 1 (February 2024): 25–35. http://dx.doi.org/10.1177/14658011231212627.
Wöckel, Lydia, Thomas Ebert, Bernd Mainzer, Martin Frieß, Dietmar Koch, Kristina Roder, Daniel Wett, Daisy Nestler, Guntram Wagner, and Stefan Spange. "Investigation of Different Phenolic Resins and their Behavior during Pyrolysis to Form SiC/C-Composites." Materials Science Forum 825-826 (July 2015): 240–48. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.240.
Schuster, J., Q. Govignon, and S. Bickerton. "Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding." Open Journal of Composite Materials 04, no. 01 (2014): 1–11. http://dx.doi.org/10.4236/ojcm.2014.41001.
Ferreira Luz, F., Sandro Campos Amico, A. de Lima Cunha, E. Santos Barbosa, and Antônio Gilson Barbosa de Lima. "Applying Computational Analysis in Studies of Resin Transfer Moulding." Defect and Diffusion Forum 326-328 (April 2012): 158–63. http://dx.doi.org/10.4028/www.scientific.net/ddf.326-328.158.
Lundström, T. Staffan. "Measurement of void collapse during resin transfer moulding." Composites Part A: Applied Science and Manufacturing 28, no. 3 (January 1997): 201–14. http://dx.doi.org/10.1016/s1359-835x(96)00109-1.
Antonelli, D., and A. Farina. "Resin transfer moulding: mathematical modelling and numerical simulations." Composites Part A: Applied Science and Manufacturing 30, no. 12 (December 1999): 1367–85. http://dx.doi.org/10.1016/s1359-835x(99)00044-5.
Zingraff, L., V. Michaud, P. E. Bourban, and J. A. E. Månson. "Resin transfer moulding of anionically polymerised polyamide 12." Composites Part A: Applied Science and Manufacturing 36, no. 12 (December 2005): 1675–86. http://dx.doi.org/10.1016/j.compositesa.2005.03.023.
Van Melick, H. G. H., G. A. A. V. Haagh, F. N. Van De Vosse, and T. Peijs. "Simulation of Mould Filling in Resin Transfer Moulding." Advanced Composites Letters 7, no. 1 (January 1998): 096369359800700. http://dx.doi.org/10.1177/096369359800700102.
Abdullah, Iram. "Manufacturing of Kevlar/Polyester Composite by Resin Transfer Moulding using Conventional and Microwave Heating." Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences 58, no. 1 (April 27, 2015): 34–40. http://dx.doi.org/10.52763/pjsir.phys.sci.58.1.2015.34.40.
Mal, O., A. Couniot, and F. Dupret. "Non-isothermal simulation of the resin transfer moulding press." Composites Part A: Applied Science and Manufacturing 29, no. 1-2 (January 1998): 189–98. http://dx.doi.org/10.1016/s1359-835x(97)00065-1.
Verheus, A. S., and J. H. A. Peeters. "The role of reinforcement permeability in resin transfer moulding." Composites Manufacturing 4, no. 1 (January 1993): 33–38. http://dx.doi.org/10.1016/0956-7143(93)90014-y.
Dippenaar, Dawid Jacobus, and Kristiaan Schreve. "3D printed tooling for vacuum-assisted resin transfer moulding." International Journal of Advanced Manufacturing Technology 64, no. 5-8 (March 15, 2012): 755–67. http://dx.doi.org/10.1007/s00170-012-4034-2.
Hayward, J. S., and B. Harris. "The effect of vacuum assistance in resin transfer moulding." Composites Manufacturing 1, no. 3 (September 1990): 161–66. http://dx.doi.org/10.1016/0956-7143(90)90163-q.
Owen, M. J., V. Middleton, and C. D. Rudd. "Fibre reinforcement for high volume resin transfer moulding (rtm)." Composites Manufacturing 1, no. 2 (June 1990): 74–78. http://dx.doi.org/10.1016/0956-7143(90)90239-s.
Kang, Moon Koo, Jae Joon Jung, and Woo Il Lee. "Analysis of resin transfer moulding process with controlled multiple gates resin injection." Composites Part A: Applied Science and Manufacturing 31, no. 5 (May 2000): 407–22. http://dx.doi.org/10.1016/s1359-835x(99)00086-x.
Matveev, MY, FG Ball, IA Jones, AC Long, PJ Schubel, and MV Tretyakov. "Uncertainty in geometry of fibre preforms manufactured with Automated Dry Fibre Placement and its effects on permeability." Journal of Composite Materials 52, no. 16 (November 23, 2017): 2255–69. http://dx.doi.org/10.1177/0021998317741951.
Henne, Markus, Paolo Ermanni, Mylène Deléglise, and Patricia Krawczak. "Heat transfer of fibre beds in resin transfer moulding: an experimental approach." Composites Science and Technology 64, no. 9 (July 2004): 1191–202. http://dx.doi.org/10.1016/j.compscitech.2003.09.021.
Levy, Arthur, and James Kratz. "Direct numerical simulation of infusion and flow-front tracking in materials with heterogeneous permeability using a pressure mapping sensor." Journal of Composite Materials 54, no. 13 (November 1, 2019): 1647–61. http://dx.doi.org/10.1177/0021998319883931.
Turner, M. R., C. D. Rudd, A. C. Long, V. Middleton, and P. McGeehin. "Net-Shape Preform Manufacture using Automated Fibre Placement." Advanced Composites Letters 4, no. 4 (July 1995): 096369359500400. http://dx.doi.org/10.1177/096369359500400404.
Song, Y. S., K. Chung, T. J. Kang, and J. R. Youn. "Numerical Prediction of Permeability Tensor for Three Dimensional Circular Braided Preform by considering Intra-tow Flow." Polymers and Polymer Composites 13, no. 4 (May 2005): 323–34. http://dx.doi.org/10.1177/096739110501300401.
Mendikute, J., J. Plazaola, M. Baskaran, E. Zugasti, L. Aretxabaleta, and J. Aurrekoetxea. "Impregnation quality diagnosis in Resin Transfer Moulding by machine learning." Composites Part B: Engineering 221 (September 2021): 108973. http://dx.doi.org/10.1016/j.compositesb.2021.108973.
Liu, Zhuang, and Xiao Qing Wu. "Permeability Prediction in the Impregnation Stage of Resin Transfer Moulding." Advanced Materials Research 160-162 (November 2010): 1211–16. http://dx.doi.org/10.4028/www.scientific.net/amr.160-162.1211.
Skordos, Alexandros A., Panagiotis I. Karkanas, and Ivana K. Partridge. "A dielectric sensor for measuring flow in resin transfer moulding." Measurement Science and Technology 11, no. 1 (December 20, 1999): 25–31. http://dx.doi.org/10.1088/0957-0233/11/1/304.
Fontana, Q. P. V. "Viscosity: thermal history treatment in resin transfer moulding process modelling." Composites Part A: Applied Science and Manufacturing 29, no. 1-2 (January 1998): 153–58. http://dx.doi.org/10.1016/s1359-835x(97)00048-1.
Al-Hamdan, A., M. Tufail, C. D. Rudd, and A. C. Long. "Skin Thickness Variation during Resin Transfer moulding of Sandwich Structures." Advanced Composites Letters 4, no. 5 (September 1995): 096369359500400. http://dx.doi.org/10.1177/096369359500400504.
Kiuna, N., C. J. Lawrence, Q. P. V. Fontana, P. D. Lee, T. Selerland, and P. D. M. Spelt. "A model for resin viscosity during cure in the resin transfer moulding process." Composites Part A: Applied Science and Manufacturing 33, no. 11 (November 2002): 1497–503. http://dx.doi.org/10.1016/s1359-835x(02)00177-x.
Keller, A., C. Dransfeld, and K. Masania. "Flow and heat transfer during compression resin transfer moulding of highly reactive epoxies." Composites Part B: Engineering 153 (November 2018): 167–75. http://dx.doi.org/10.1016/j.compositesb.2018.07.041.
Wright, Nicholas, Piaras Kelly, Oliver Maclaren, Ruanui Nicholson, and Suresh Advani. "Bayesian Optimal Experimental Design for Race Tracking in Resin Transfer Moulding." Applied Sciences 13, no. 20 (October 23, 2023): 11606. http://dx.doi.org/10.3390/app132011606.
Gauvin, R., and M. Chibani. "The Modelling of Mold Filling in Resin Transfer Molding." International Polymer Processing 1, no. 1 (March 1, 1986): 42–46. http://dx.doi.org/10.1515/217.860042.
Pico, Diego, Samir Machado, Juan Meza, and Jimy Unfried-Silgado. "RESIN FLOW ANALYSIS DURING FABRICATION OF COCONUT MESOCARP FIBER-REINFORCED COMPOSITES USING VARTM PROCESS." International Journal of Modern Manufacturing Technologies 15, no. 1 (June 20, 2023): 51–59. http://dx.doi.org/10.54684/ijmmt.2023.15.1.51.
Saad, Aouatif, Adil Echchelh, Mohammed Hattabi, and Ganaoui El. "An improved computational method for non isothermal resin transfer moulding simulation." Thermal Science 15, suppl. 2 (2011): 275–89. http://dx.doi.org/10.2298/tsci100928016s.
Bickerton, S., and P. A. Kelly. "Application of a Complete Tooling Force Analysis for Simulation of Liquid Composite Moulding Processes." Key Engineering Materials 334-335 (March 2007): 17–20. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.17.
Long, A. C., C. D. Rudd, M. Blagdon, K. N. Kendall, and M. Y. Demeri. "Simulation and Measurement of Reinforcement Deformation during Preform Manufacture." Engineering Plastics 4, no. 5 (January 1996): 147823919600400. http://dx.doi.org/10.1177/147823919600400506.
Long, A. C., C. D. Rudd, M. Blagdon, K. N. Kendall, and M. Y. Demeri. "Simulation and Measurement of Reinforcement Deformation during Preform Manufacture." Polymers and Polymer Composites 4, no. 5 (July 1996): 335–41. http://dx.doi.org/10.1177/096739119600400506.
Rutt, Mathew, C. Lekakou, P. A. Smith, A. Sordon, C. Santoni, G. Meeks, and I. Hamerton. "Methods for process-related resin selection and optimisation in high-pressure resin transfer moulding." Materials Science and Technology 35, no. 3 (December 31, 2018): 327–35. http://dx.doi.org/10.1080/02670836.2018.1557916.
Karkanas, Panagiotis I., Ivana K. Partridge, and David Attwood. "Modelling the Cure of a Commercial Epoxy Resin for Applications in Resin Transfer Moulding." Polymer International 41, no. 2 (October 1996): 183–91. http://dx.doi.org/10.1002/(sici)1097-0126(199610)41:2<183::aid-pi621>3.0.co;2-f.
Szebényi, Gábor, and Gábor Romhány. "The Effect of Electron Irradiation on the Mechanical Properties of MWCNT/Carbon Fiber Reinforced Hybrid Nanocomposites." Materials Science Forum 659 (September 2010): 91–95. http://dx.doi.org/10.4028/www.scientific.net/msf.659.91.
MAFFEZZOLI, A. M., J. M. KENNY, and L. NICOLAIS. "Mathematical modelling of the resin transfer moulding of polyester based composites." Polimery 35, no. 01/02 (January 1990): 5–9. http://dx.doi.org/10.14314/polimery.1990.005.
Al-Hamdan, A., M. Al-Ajloni, M. Alhusein, C. D. Rudd, and A. C. Long. "Behaviour of core materials during resin transfer moulding of sandwich structures." Materials Science and Technology 16, no. 7-8 (July 2000): 929–34. http://dx.doi.org/10.1179/026708300101508711.
Lam, Y. C., Sunil C. Joshi, and X. L. Liu. "Numerical simulation of the mould-filling process in resin-transfer moulding." Composites Science and Technology 60, no. 6 (May 2000): 845–55. http://dx.doi.org/10.1016/s0266-3538(99)00192-x.
Béchet, E., E. Ruiz, and F. Trochu. "Adaptive mesh generation for mould filling problems in resin transfer moulding." Composites Part A: Applied Science and Manufacturing 34, no. 9 (September 2003): 813–34. http://dx.doi.org/10.1016/s1359-835x(03)00199-4.