Добірка наукової літератури з теми "Residue mixing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Residue mixing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Residue mixing"
Zhang, Xianhong, Zhilin Wang, Fengzhi Wu, and Xingang Zhou. "The Influence of Residue Mixing on the Decomposition of Pepper Root Residues." Agriculture 12, no. 1 (January 10, 2022): 84. http://dx.doi.org/10.3390/agriculture12010084.
Повний текст джерелаZhambolova, A., Y. Ongarbayev, Y. Tileuberdi, and B. Teltayev. "Oxidation of Vacuum Residue with the Addition of Crumb Rubber." Eurasian Chemico-Technological Journal 24, no. 1 (March 31, 2022): 21. http://dx.doi.org/10.18321/ectj1145.
Повний текст джерелаYu, Chengcheng, Yongzeng Yang, Xunqiang Yin, Meng Sun, and Yongfang Shi. "Impact of Enhanced Wave-Induced Mixing on the Ocean Upper Mixed Layer during Typhoon Nepartak in a Regional Model of the Northwest Pacific Ocean." Remote Sensing 12, no. 17 (August 30, 2020): 2808. http://dx.doi.org/10.3390/rs12172808.
Повний текст джерелаSuyunov, R. R., and M. I. Laser. "MELANGETM technology of the bitumen production in one-stage without oxidation." World of Oil products the Oil Companies Bulletin 04, no. 1 (2021): 36–39. http://dx.doi.org/10.32758/2071-5951-2021-1-4-36-39.
Повний текст джерелаLin, Qinhao, Guohua Zhang, Long Peng, Xinhui Bi, Xinming Wang, Fred J. Brechtel, Mei Li, et al. "In situ chemical composition measurement of individual cloud residue particles at a mountain site, southern China." Atmospheric Chemistry and Physics 17, no. 13 (July 12, 2017): 8473–88. http://dx.doi.org/10.5194/acp-17-8473-2017.
Повний текст джерелаJarallah, Aysar T., and Shaemaa A. Hameed. "Deashaltening and Hydrodesulphurization of Jumboor Vacuum Residue." Tikrit Journal of Engineering Sciences 14, no. 3 (September 30, 2007): 61–82. http://dx.doi.org/10.25130/tjes.14.3.10.
Повний текст джерелаLi, Yuelin, Samuel Eyley, Wim Thielemans, Qiang Yuan, and Jiabin Li. "Valorization of deep soil mixing residue in cement-based materials." Resources, Conservation and Recycling 187 (December 2022): 106597. http://dx.doi.org/10.1016/j.resconrec.2022.106597.
Повний текст джерелаCarrillo-Parra, Artemio, Juan Carlos Contreras-Trejo, Marín Pompa-García, Miguel Ángel Pulgarín-Gámiz, José Guadalupe Rutiaga-Quiñones, Gerardo Pámanes-Carrasco, and Maginot Ngangyo-Heya. "Agro-Pellets from Oil Palm Residues/Pine Sawdust Mixtures: Relationships of Their Physical, Mechanical and Energetic Properties, with the Raw Material Chemical Structure." Applied Sciences 10, no. 18 (September 13, 2020): 6383. http://dx.doi.org/10.3390/app10186383.
Повний текст джерелаYang, Fu Min, Min Yang, and Ke Ping Zhang. "Study on Transforming from Vegetable-Residue to Roughage." Advanced Materials Research 726-731 (August 2013): 2970–74. http://dx.doi.org/10.4028/www.scientific.net/amr.726-731.2970.
Повний текст джерелаJames, Rachel L., Sergio Ioppolo, Søren V. Hoffmann, Nykola C. Jones, Nigel J. Mason, and Anita Dawes. "Systematic investigation of CO2 : NH3 ice mixtures using mid-IR and VUV spectroscopy – part 2: electron irradiation and thermal processing." RSC Advances 11, no. 52 (2021): 33055–69. http://dx.doi.org/10.1039/d1ra05600j.
Повний текст джерелаДисертації з теми "Residue mixing"
Häggström, Gustav. "Evaluation of the potential for co-gasification of black liquor and biofuel by-products : An experimental study of mixing and char reactivity." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-105223.
Повний текст джерелаTatarniuk, Catherine. "Deep soil mixing as a slope stabilization technique in Northland Allochthon residual clay soil." Thesis, University of Canterbury. Civil and Natural Resources Engineering, 2014. http://hdl.handle.net/10092/9648.
Повний текст джерелаITO, Toshimasa, Keisuke TANAKA, Yoshiaki AKINIWA, Takahiro ISHII, and Yasuhiro MIKI. "X-Ray Study of Mechanical Properties of TiN Thin Films Coated on Steel by Ion Beam Mixing Method." The Japan Society of Mechanical Engineers, 2003. http://hdl.handle.net/2237/9182.
Повний текст джерелаBessières, Laurent. "Impact des marées sur la circulation générale océanique dans une perspective climatique." Phd thesis, Université Paul Sabatier - Toulouse III, 2007. http://tel.archives-ouvertes.fr/tel-00172154.
Повний текст джерелаPour examiner chacun de ces aspects, la méthode retenue consiste à paramétriser les effets de la marée dans un modèle tridimensionnel de circulation générale océanique (OGCM) dédié au climat : NEMO. Pour ce faire nous utilisons les sorties 'off line' d'un modèle hydrodynamique bidimensionnel dédié à la marée : MOG2D-G. Dans un premier temps nous déterminons et nous décrivons pour la première fois une carte de la circulation résiduelle de marée (CRM) mondiale générée par la dynamique non-linéaire de la marée. Cette CRM obtenue par l'intermédiaire de MOG2D-G est alors introduite sous la forme d'un forçage extérieur dans l'OGCM NEMO. Dans un second temps, nous examinons la dissipation de l'énergie des marées. Tout d'abord nous quantifions la fraction de l'énergie de marée qui est dissipée en chaleur, ceci afin de déterminer si, à l'instar du flux géothermal, elle est susceptible de jouer un rôle important sur la circulation abyssale. Après avoir écarté cette possibilité, nous considérons la fraction d'énergie de marée qui se dissipe localement en mélange vertical via les ondes internes : le "tidal mixing" (TM). Le TM résulte d'un transfert d'énergie du mode barotope vers les modes baroclines. Ce transfert est diagnostiqué grâce au modèle MOG2D-G et intégré dans NEMO par l'intermédiaire d'une paramétrisation du mélange turbulent vertical.
Nous concluons : (i) que l'effet des marées sur la circulation océanique grande échelle et in fine sur le climat ne peut être significatif qu'à travers le TM, (ii) que l'introduction du TM local dans les OGCM est essentielle pour représenter correctement le transport des masses d'eaux abyssales et (iii) qu'il est désormais crucial de considérer le TM engendré loin du site de génération des ondes internes
Hasbullah, Hasbullah. "Alleviating the negative effect of salinity on soil respiration by plant residue addition: effect of residue properties, mixing and amendment frequency." Thesis, 2015. http://hdl.handle.net/2440/102766.
Повний текст джерелаThesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Agriculture, Food and Wine, 2015.
Shi, Andong. "The effect of residue mixing, clay content and drying and rewetting on soil respiration and microbial biomass." Thesis, 2015. http://hdl.handle.net/2440/93521.
Повний текст джерелаThesis (Ph.D.) -- University of Adelaide, School of Agriculture, Food and Wine, 2015
Bright, Andrew G. "Residual gas mixing in engines." 2004. http://catalog.hathitrust.org/api/volumes/oclc/56616105.html.
Повний текст джерелаTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 141-143).
Chen, Tien-Tien, and 陳恬恬. "The Effects of Mixing Bark Residues from Radiata Pine on Properties of Particleboard." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/25017155717934636914.
Повний текст джерела國立嘉義大學
森林暨自然資源研究所
94
The demand for wood products has been increasing for recent years, resulting in much more wood wastes. Bark can be regarded as an utilization indicator of overall wood wastes. Bark from some species contains abundant lignin and poly-phenols such as tannin, which can be used for making bio-based adhesives and eliminating free formaldehyde emission. In addition, in order to make the most of wood waste, various types of particleboard can be produced by mixing bark and wood particle in different ratios. In this study, wood particle/bark mixtures were made in different ratios. Several types of particleboard were produced, according to the following parameters:glue content, bark/wood particle size, bark mixed ratio and additive(e.g. furfural) . To evaluate the feasibility of the mass production of particleboard made of radiata pine bark/ wood particle, density (D), moisture content (MC), internal bond strength (IB), bending strength (BS), thickness swelling (TS), and the free formaldehyde emission were investigated. The results showed that the compression ratio of the particle board is inversely correlated with the proportion of the bark mixed in the boards. The density of single-layered particleboard ranged from 0.63 to 0.65 g/cm3 and the moisture content ranged from 7.99 to 9.02%. The thickness swelling increased as the glue content and bark size decreased. Increased bark proportion also resulted in increased thickness swelling. Free formaldehyde emission decreased as bark mixed ratio increased and glue content decreased. The amount of free formaldehyde from most of our boards meets the requirement described in the E1 criterion from CNS 2215 standards for normal particleboard. Internal bond strength decreased as glue content decreased and bark size got finer; increased bark proportion also resulted in decreased internal bond strength. The modulus of elasticity was slightly increased when the board manufactured under mixing 5% bark, but decreased when the board manufactured under mixing over decreased 10% of bark. The modulus of elasticity also decreased as glue content and bark size got finer. The modulus of rupture was slightly increased when the board manufactured under mixing 5% bark (-60+100 mesh), but it decreased when the board manufactured under mixing over 10% of bark. The modulus of rupture also decreased as glue content and bark size got finer. The mechanical strength of the board could be improved by increasing the furfural additives according to the increased bark proportion. After being tested with CNS 2215 standards for normal particle board, all the boards manufactured in the study did not meet the MOE standard, and a small number of the boards did not meet the type 8 criterion; however, most of our boards are of a quality higher than type 8 criterion, some of them even having a quality higher than type 13 criterion.
Liu, Yo-Ruey, and 劉又瑞. "Mixing Water Treatment Residual with Excavation Soil in Brick and Artificial Aggregate-Making." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/28632522804945090197.
Повний текст джерела國立交通大學
環境工程所
90
Although water treatment residual (WTR) contains no hazardous chemicals, the increasing volume generated from water treatment has reached unmanageable level. The soil excavated from the ground before construction, essentially clay, is another big problem in this island. Currently, landfill disposal is the main waste management method for these two waste soils, which is not a practical solution because of high cost of transportation and the scarcity in land. Due to the nature of WTR and excavation soil (ES), recycling and reuse in construction materials has become a more popular way of treating them. In this study, sintering processes were attempted to make the waste soils into building brick and artificial aggregate. First, the chemical compositions of WTR and ES were analyzed using ICP-AES and the mineralogical composition was determined with X-ray diffraction. The chemical composition of ES was similar to clay. WTR had more Al2O3 and less SiO2 than ES. The compression strength result suggested that sintering temperature was critical in brick-making. Various amount of WTR was added to ES before sintering, and the sintering behaviors of the products from different sintering conditions were monitored. When sintered at 1050℃, the brick from samples containing 30% WTR could reach around 200 kg/cm2 compression strength. Bricks made from mixtures containing 15% WTR could reach 100 kg/cm2 compression strength when sintered at 950℃. The specific gravities of artificial aggregates sintered at 1000℃, 1050℃, and 1100℃ were all less than 2 kg/cm3. Results of specific gravity, water absorption, and compression strength suggested that WTR artificial aggregate could meet the general requirement for lightweight aggregates.
Netshidaulu, Ahuiwi Emmanuel. "Impact of chlorine and wastewater contact time, chlorine residual and mixing on micro organism inactivation." Thesis, 2016. http://hdl.handle.net/10539/20035.
Повний текст джерелаКниги з теми "Residue mixing"
H, Saiyed Naseem, and United States. National Aeronautics and Space Administration., eds. Characteristics of residual mixing noise from internal fan/core mixers. [Washington, DC]: National Aeronautics and Space Administration, 1997.
Знайти повний текст джерелаPivokonský, Martin, Kateřina Novotná, Lenka Čermáková, and Radim Petříček, eds. Jar Tests for Water Treatment Optimisation. IWA Publishing, 2022. http://dx.doi.org/10.2166/9781789062694.
Повний текст джерелаЧастини книг з теми "Residue mixing"
Pungercar, Vesna, Martino Hutz, and Florian Musso. "3D Print with Salt." In 3D Printing for Construction with Alternative Materials, 91–125. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-09319-7_5.
Повний текст джерелаWolanski, Eric, and Peter Ridd. "Mixing and Trapping in Australian Tropical Coastal Waters." In Residual Currents and Long-term Transport, 165–83. New York, NY: Springer New York, 1990. http://dx.doi.org/10.1007/978-1-4613-9061-9_13.
Повний текст джерелаYasuda, H. "Tide-induced residual currents generated by the Stokes Layer in the rotating tidal basin." In Mixing in Estuaries and Coastal Seas, 95–109. Washington, D. C.: American Geophysical Union, 1996. http://dx.doi.org/10.1029/ce050p0095.
Повний текст джерелаRidderinkhof, H., and J. T. F. Zimmerman. "Mixing Processes in a Numerical Model of the Western Dutch Wadden Sea." In Residual Currents and Long-term Transport, 194–209. New York, NY: Springer New York, 1990. http://dx.doi.org/10.1007/978-1-4613-9061-9_15.
Повний текст джерелаPark, Kyeong, and Albert Y. Kuo. "Effect of variation in vertical mixing on residual circulation in narrow, weakly nonlinear estuaries." In Coastal and Estuarine Studies, 301–17. Washington, D. C.: American Geophysical Union, 1996. http://dx.doi.org/10.1029/ce053p0301.
Повний текст джерелаMarinone, S. G., and M. F. Lavín. "Residual Flow and Mixing in the Large Islands Region of the Central Gulf of California." In Nonlinear Processes in Geophysical Fluid Dynamics, 213–36. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-010-0074-1_13.
Повний текст джерелаMizera, Jiří, and Zdeněk Řanda. "Geochemical indicators of a biogenic component in source materials of moldavites." In In the Footsteps of Warren B. Hamilton: New Ideas in Earth Science. Geological Society of America, 2022. http://dx.doi.org/10.1130/2021.2553(26).
Повний текст джерелаMacCready, P., and N. S. Banas. "Residual Circulation, Mixing, and Dispersion." In Treatise on Estuarine and Coastal Science, 75–89. Elsevier, 2011. http://dx.doi.org/10.1016/b978-0-12-374711-2.00205-9.
Повний текст джерелаChan, Weng C., and Peter D. White. "Basic procedures." In Fmoc Solid Phase Peptide Synthesis. Oxford University Press, 1999. http://dx.doi.org/10.1093/oso/9780199637256.003.0007.
Повний текст джерелаMcHugh, Mark A. "Solubility of Polymers in Supercritical Carbon Dioxide." In Green Chemistry Using Liquid and Supercritical Carbon Dioxide. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780195154832.003.0012.
Повний текст джерелаТези доповідей конференцій з теми "Residue mixing"
Ferreira, Manuel E. C., Jorge J. G. Martins, and Jose´ C. F. Teixeira. "Optimization of an Effervescent Atomizer to the Combustion of Residue Oils." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72427.
Повний текст джерелаWu, Zhiqiang, Shuzhong Wang, Jun Zhao, Lin Chen, and Haiyu Meng. "Investigation on Thermal and Kinetic Characteristics During Co-Pyrolysis of Coal and Lignocellulosic Agricultural Residue." In ASME 2014 Power Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/power2014-32162.
Повний текст джерелаSiddiqui, Farooq R., Edwin C. Y. Tso, Sau C. Fu, Christopher Y. H. Chao, and Huihe Qiu. "Experimental Investigation on Silver-Graphene Hybrid Nanofluid Droplet Evaporation and Wetting Characteristics of its Nanostructured Droplet Residue." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-5049.
Повний текст джерелаDarbandi, Masoud, Bagher Abrar, Mohammad B. Barezban, Amin Faridvand, and Gerry E. Schneider. "Reacting Turbulent Flow Simulation to Improve the Mixing Process in an Oil Refinery Incinerator." In ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/fedsm2014-21954.
Повний текст джерелаDöbbeling, K., H. P. Knöpfel, W. Polifke, D. Winkler, C. Steinbach, and T. Sattelmayer. "Low NOx Premixed Combustion of MBTU Fuels Using the ABB Double Cone Burner (EV Burner)." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-394.
Повний текст джерелаChen, Sheng, Haoyuan Kang, Mengke Wang, Cenfan Liu, Haitao Lin, and Juanbo Liu. "Reactive CFD Simulation of Fixed Coke Formation in an Industrial RFCC Riser Reactor." In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-61671.
Повний текст джерелаAvramenko, Valentin, Svetlana Bratskaya, Dmitry Marinin, Anatoliy Terzi, and Mariya Yarmolyuk. "Pilot Test of Precipitation Setup for Dust Supressor and Transuranic Elements Removal From Wastewaters of Chernobyl Nuclear Power Plant." In ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59256.
Повний текст джерелаFyffe, John R., Aaron K. Townsend, and Michael E. Webber. "Methodology for Comparing End-of-Life Pathways for Non-Recycled Materials." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64131.
Повний текст джерелаAda´nez, Juan, Luis F. de Diego, Pilar Gaya´n, Francisco Garci´a-Labiano, Andre´s Cabanillas, and Alberto Bahillo. "Co-Combustion of Biomass and Coal in Circulating Fluidized Bed: Modeling and Validation." In 17th International Conference on Fluidized Bed Combustion. ASMEDC, 2003. http://dx.doi.org/10.1115/fbc2003-064.
Повний текст джерелаJing, Jiaqiang, Hongbin Niu, Lingbin Pan, Xiaoqin Xiong, and Liwen Tan. "Compatibility Evaluation of BZ25-1 Crude Oils in Bohai Bay, China." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42841.
Повний текст джерелаЗвіти організацій з теми "Residue mixing"
Kontak, D. J., S. Paradis, Z. Waller, and M. Fayek. Petrographic, fluid inclusion, and secondary ion mass spectrometry stable isotopic (O, S) study of Mississippi Valley-type mineralization in British Columbia and Alberta. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/327994.
Повний текст джерелаAl-Qadi, Imad, Qingqing Cao, Lama Abufares, Siqi Wang, Uthman Mohamed Ali, and Greg Renshaw. Moisture Content and In-place Density of Cold-Recycling Treatments. Illinois Center for Transportation, May 2022. http://dx.doi.org/10.36501/0197-9191/22-007.
Повний текст джерела