Дисертації з теми "Repair strategy"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Repair strategy".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Mroszczyk, Keri A. "A tissue engineering strategy for integrative cartilage repair." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92188.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 56-64).
Tissue engineering for cartilage repair is a promising approach for improving the healing of articular defects, as biomaterials and growth factors can be supplied directly to a focal lesion. However, integrating neo-tissue with native cartilage to provide mechanical and biological continuity at the interface remains a challenge due to the limited regenerative capacity of the tissue. In an effort to improve integration, enzyme treatments were investigated as a means of functionally grafting engineered tissue to native tissue. Using an in vitro model of defect repair, this study develops a repair strategy that employs both a hydrogel (KLD) functionalized with HB-IGF-1 and an enzyme pre-treatment of the cartilage surrounding a defect to provide local delivery of the pro-anabolic factor and allow for functional integration of cartilage neo-tissue. Results indicate that the rate of proteoglycan synthesis was elevated in cartilage explants into which KLD pre-mixed with HB-IGF-1 had been cast; both the explants that had received the enzyme pre-treatment and those that were left untreated had a two-fold increase compared to the explants exposed to non-functionalized KLD. Similarly, GAG content was favorably elevated in the chondrocyte-seeded gels exposed to the growth factor. While GAG was depleted selectively within the inner annulus of the explants receiving the pre-treatment, no negative effect was observed on the rate of proteoglycan synthesis or GAG content compared to that in explants left untreated. Further, mechanical tests suggest that the combination of KLD functionalized with HB-IGF- 1 together with an enzyme pre-treatment is able to increase interfacial strength between engineered tissue and native matrix. Taken together, a repair strategy combining an enzyme pre-treatment of a defect with a peptide hydrogel functionalized with pro-anabolic HB-IGF-1, as developed in this study, is a promising approach for enhancing integration. Stimulating the surrounding tissue with the growth factor and allowing for functional integration of newly synthesized matrix promotes continuity at the interface between new and native tissue, ultimately improving the overall quality of repair.
by Keri A. Mroszczyk.
S.M.
Puwanun, Sasima. "Developing a tissue engineering strategy for cleft palate repair." Thesis, University of Sheffield, 2014. http://etheses.whiterose.ac.uk/7175/.
Frampton, Matthew. "Using Dialogue Acts in dialogue strategy learning : optimising repair strategies." Thesis, University of Edinburgh, 2008. http://hdl.handle.net/1842/2381.
Kwiatkowski, Thomas Anthony. "Enhancing membrane repair as a therapeutic strategy for various muscular dystrophies." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1586263887018094.
Supawiwat, Nutthapon. "A study on road slope management system considering maintenance and repair strategy." 京都大学 (Kyoto University), 2005. http://hdl.handle.net/2433/144540.
0048
新制・課程博士
博士(工学)
甲第11867号
工博第2560号
新制||工||1358(附属図書館)
23647
UT51-2005-N701
京都大学大学院工学研究科土木システム工学専攻
(主査)教授 大西 有三, 教授 大津 宏康, 教授 中北 英一
学位規則第4条第1項該当
BONKAT, BARNABAS NANPAK. "ANALYTICAL PROCEDURE FOR EVALUATING ROADWAY UPGRADING STRATEGY FOR LOW-VOLUME HIGHWAYS." Diss., The University of Arizona, 1985. http://hdl.handle.net/10150/187926.
Dao, Cuong D., and M. J. Zuo. "Selective maintenance for multi-state systems considering the benefits of repairing multiple components simultaneously." Springer, 2014. http://hdl.handle.net/10454/17980.
Many industrial systems such as aircrafts, ships, manufacturing systems, etc. are required to perform several missions with finite breaks between missions. Maintenance is only available within the breaks. Due to the limitation of resources, all components in the system may not be maintained as desired. The selective maintenance problem helps the decision makers figure out what critical components to select and how to perform maintenance on these components. This paper studies the selective maintenance for multi-state series-parallel systems with the benefit of repairing multiple components simultaneously. Both time and cost savings can be acquired when several components are simultaneously repaired in a selective maintenance strategy. As the number of repaired components increases, the saved time and cost will also increase due to the share of setting up between components and another additional reduction amount from the repair of multiple identical components. A non-linear optimization model is developed to find the most reliable system subjected to time and cost constraints. Genetic algorithm is used to solve the optimization model. An illustrative example will be provided.
Natural Sciences and Engineering Research Council of Canada (NSERC) and Vietnam International Education Development (VIED)
Ramkrishnan, Karthik. "Optimal Investment Strategy for Energy Performance Improvements in Existing Buildings." Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19855.
Vykydal, Filip. "Podnikatelský plán založení restauračního zařízení s opravnou v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2019. http://www.nusl.cz/ntk/nusl-402140.
Vanto, Zacharia. "Developing a sourcing strategy in the South African Police Service Garages." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/20341.
ENGLISH ABSTRACT: research study was about finding the right sourcing strategy that would work effectively for the South African Police Service (SAPS) garages. Its purpose was to help the SAPS garages deal strategically and effectively with their work load while repairing the SAPS vehicles, as the current evidence indicated that the garages might not have sufficient capacity to cope with the volume of repairs they were receiving. The research was structured as a case study design, in which personal interviews were held with SAPS garage managers, SAPS strategy drivers (Head Office) and executive managers at the City of Cape Town, Western Cape Provincial Government Fleet, and Passenger Rail Agency of South Africa (PRASA). To follow up on these initial one-on-one interviews, a further questionnaire comprising similar, information-gathering questions was sent out to various SAPS garage managers to elicit more detailed information on the circumstances of their individual garages. A literature review, which formed the basis of the study, explains the sourcing strategy, and explores different sourcing options including how to make the best sourcing decision. In this study, three models of sourcing strategy were considered, and were supported by the case study of the City of Cape Town, Western Cape Provincial fleet management, and PRASA. This study has proved that what the different authors have written and recommended about in-sourcing and outsourcing can still be considered in conjunction with the current legislative and policy framework. The cost analysis was conducted in order to be able to assess which option would be the more expensive between in-sourcing and outsourcing. The fundamental finding of this research was that the SAPS garages could not handle all the work they were receiving, as they did not have the capacity, for various reasons, to deal with the volume of vehicle repairs that were coming in, and that the variety of sourcing strategies at the different garages were not effectively reducing the backlog. There was no clear sourcing strategy in place from the National office to guide the garages. From these findings, the recommendation is that the big garages should handle all the services and minor repairs including some major repairs, with the majority of the major repairs being outsourced to service providers, while the smaller garages should focus on services and minor repairs only, and outsource all major repairs. The vehicles that are not within a 30km radius of the SAPS garages must be directly outsourced to providers using the RT46 contract, or similar arrangement. Further research studies are needed regarding the demographic structure of the garages, and also regarding the effectiveness and efficiency of the actual running of the garages. A balance then needed to be found between in-sourcing and outsourcing, whilst ensuring that the garages were operating efficiently and outsourcing responsibly.
AFRIKAANSE OPSOMMING: Die navorsingstudie is gedoen om die effektiefste en geskikste verkrygingstrategie vir die voertuigwerkswinkels van die Suid-Afrikaanse Polisiediens (SAPD) te bepaal. Die doel was om die werkswinkels te help om strategies en effektief te werk gegewe hulle werkslading, aangesien huidige bewyse getoon het dat hulle nie voldoende kapasiteit daarvoor het nie. Die navorsing is gestruktureer as ’n gevallestudie, waartydens persoonlike onderhoude met SAPD-werkswinkelbestuurders, SAPD- strategiese drywers (Hoofkantoor), en uitvoerende bestuurders van die Stad Kaapstad, die Wes-Kaapse Provinsiale Regering-vloot en die passasier-spooragentskap van Suid-Afrika (PRASA) gevoer is. Ter opvolging van die oorspronklike individuele onderhoude is ’n verdere vraelys gebruik waarin soortgelyke vrae aan SAPD-werkswinkelbestuurders gestel is om meer inligting aangaande die toestand van hulle werkswinkels te bekom. ’n Literatuuroorsig, wat die basis gevorm het van die studie, verduidelik die verkrygingstrategie en ondersoek verskillende verkrygingsopsies, asook hoe om die beste verkrygingsbesluite te neem. In hierdie studie is drie verkrygingstrategiemodelle oorweeg, wat ondersteun is deur die gevallestudie van die Stad Kaapstad, die Wes-Kaapse Provinsiale Regering-vlootbestuur en PRASA. Die studie het bewys dat dít wat die onderskeie outeurs oor in- en uitkontraktering bevind en aanbeveel het, steeds oorweeg behoort te word, aangevul deur die bestaande wetgewing en beleidsraamwerk. Die kosteontleding is gedoen om te bevestig watter in- of uitkontrakteringsopsies die effektiefste sou wees. Die fundamentele bevinding van hierdie navorsing is dat die SAPD se voertuigwerkswinkels tans nie al die werk wat hulle ontvang, kan hanteer nie, omdat hulle om verskeie redes nie die nodige kapasiteit het om die groot aantal voertuie wat inkom, te herstel nie. Die uiteenlopende strategieë wat die onderskeie werkswinkels volg sover dit uitkontraktering betref, verminder ook nie die agterstand nie. Daar is nie ’n duidelike verkrygingstrategie van die nasionale kantoor wat riglyne aan die werkswinkels verskaf nie. Die aanbeveling na aanleiding van hierdie bevindinge is dat die groot werkswinkels al die versienings en kleiner herstelwerk, met inbegrip van sekere groot herstelwerk, moet hanteer, terwyl die kleiner werkswinkels moet fokus op versienings en kleiner herstelwerk, en alle groot herstelwerk moet uitkontrakteer. Indien voertuie buite ’n 30 km-radius van ’n SAPD-werkswinkel is, moet sodanige herstelwerk uitgekontrakteer word deur gebruik te maak van die RT46-kontrak, of ’n soortgelyke reëling. Verdere navorsingstudies is nodig oor die demografiese struktuur van die werkswinkels, asook die doelmatigheid en effektiwiteit betreffende die werklike bedryf van die werkswinkels. ’n Balans moet gevind word tussen in- en uitkontraktering, terwyl daar verseker moet word dat die werkswinkels effektief bedryf word en uitkontraktering op ’n verantwoordelike wyse geskied.
Li, Yanhui. "Construction and Analysis of a Genome-Wide Insertion Library in Schizosaccharomyces pombe Reveals Novel Aspects of DNA Repair." Case Western Reserve University School of Graduate Studies / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=case1413927620.
Haschke, Heinz R. [Verfasser]. "A Biokinetic Model to Describe Consequences of Inhibition/Stimulation in DNA-Proofreading and -Repair : Biochemical Aspects to Support a Hypothesis for a New Strategy in Cancer Therapy / Heinz R Haschke." Aachen : Shaker, 2004. http://d-nb.info/117261430X/34.
Larsson, Ellinor, and Lovisa Ferngren. "Is it too late now to say sorry? : A descriptive research on how brands' responses towards sexism advertisements affect consumers' attitudes." Thesis, Linnéuniversitetet, Institutionen för marknadsföring (MF), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-104721.
Дяченко, Тетяна Анатоліївна. "Формування конкурентних стратегій промислових підприємств на ринку ремонтних послуг". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21291.
Thesis for the Degree of Candidate of Economic Sciences in speciality 08.00.04 – Economy and management of the enterprises (by types of economic activities). – National Technical University "Kharkiv Polytechnic Institute" of the Ministry of Education and Science of Ukraine, Kharkiv, 2016. The dissertation presents theoretical generalizations and perspective solution of scientific and practical task of the industrial enterprises’ competitive strategies development on the repair service market. The theoretical bases of competition and strategic management have been investigated in the thesis. The basic concepts that characterize these processes have been defined. The classification of the competitive strategies of industrial enterprises on the repair service market by criteria of the degree of strategic transformation has been developed. Also the agents’ classification has been supplemented by a group that forms the institutional and legal environment. The state and the features of conditions of enterprises functioning on the repair service market have been analyzed. The integral indicators of the market competitive environment, the strength of competitive position of an enterprise and taxonomic indicator of the effectiveness level of industrial enterprise on the repair service market have been developed. The methodological bases determining the appropriateness of the enterprise functioning on the target market have been improved with the help of matrix approach to estimation of market competitive environment and the strength of competitive position of an enterprise. The methodological approach to the industrial enterprises competitive strategies forming has been proposed and substantiated. The approach is based on the analysis of an enterprise competitive position strength and the level of effectiveness as the main indicators of degree of the strategic objectives achievement.
Дяченко, Тетяна Анатоліївна. "Формування конкурентних стратегій промислових підприємств на ринку ремонтних послуг". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21290.
Thesis for the Degree of Candidate of Economic Sciences in speciality 08.00.04 – Economy and management of the enterprises (by types of economic activities). – National Technical University "Kharkiv Polytechnic Institute" of the Ministry of Education and Science of Ukraine, Kharkiv, 2016. The dissertation presents theoretical generalizations and perspective solution of scientific and practical task of the industrial enterprises’ competitive strategies development on the repair service market. The theoretical bases of competition and strategic management have been investigated in the thesis. The basic concepts that characterize these processes have been defined. The classification of the competitive strategies of industrial enterprises on the repair service market by criteria of the degree of strategic transformation has been developed. Also the agents’ classification has been supplemented by a group that forms the institutional and legal environment. The state and the features of conditions of enterprises functioning on the repair service market have been analyzed. The integral indicators of the market competitive environment, the strength of competitive position of an enterprise and taxonomic indicator of the effectiveness level of industrial enterprise on the repair service market have been developed. The methodological bases determining the appropriateness of the enterprise functioning on the target market have been improved with the help of matrix approach to estimation of market competitive environment and the strength of competitive position of an enterprise. The methodological approach to the industrial enterprises competitive strategies forming has been proposed and substantiated. The approach is based on the analysis of an enterprise competitive position strength and the level of effectiveness as the main indicators of degree of the strategic objectives achievement.
Jenvald, Mattias, and Mikael Hovmöller. "Reducing Delays for Unplanned Maintenance of Service Parts in MRO Workshops : A case study at an aerospace and defence company." Thesis, Linköpings universitet, Produktionsekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-167203.
Joseph, Mathews. "Failure analysis in a paper mill and a coal conveyor system." Thesis, Queensland University of Technology, 1996. https://eprints.qut.edu.au/36003/1/36003_Joseph_1997.pdf.
Іванов, О. В. "Раціональне рішення при ремонтних роботах технологічного устаткування газопроводів в блочно-комплектному виконанні". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2013. http://elar.nung.edu.ua/handle/123456789/4626.
Диссертация посвящена разработке рациональных решений при ремонтных работах технологического оборудования в блочно-комплектном исполнении и повышению эффективности эксплуатации объектов систем трубопроводного транспорта газа путем выбора рациональных стратегий технического обслуживания. Для этого созданы математические модели и проведены долговременные экспериментальные и аналитические исследования, позволяющие определить: рациональное разбиение блочно-комплектного оборудования (БКУ) на отдельные элементы, выбор стратегий и режимов обслуживания, выделение предотказного (предаварийного) состояния блоков, узлов и деталей. Предложенные стратегии технического обслуживания и ремонта позволяют увеличить наработки между отказами, уменьшить периодичность ремонтных работ, исключить ряд регламентных операций, и тем самым снизить трудоемкость, продолжительность и стоимость обслуживания. Для обеспечения надежности работы системы использованы методы повышения показателей надежности элементов технологического оборудования за счет планирования и проведения профилактических ремонтов. В данной работе рассмотрению подлежат три типа взаимосвязанных задач: рациональное расчленение БКУ на отдельные обособленные объекты (элементы) обслуживания и ремонта (I), выбор для каждого выделенного элемента рациональной стратегии и режима обслуживания и ремонта (И), определение целесообразности восстановления элемента на месте или на ремонтной базе, или списания (III). Это может быть решение задачи одного из типов при фиксированных решениях других задач (условно названных одномерным случаем) или общее решение двух задач различных типов при фиксированном решении задачи, осталась. Комплексное решение перечисленных задач на достижение глобального оптимума по выбранным критериям, в сущности, и определяет рациональную стратегию технического обслуживания и ремонта БКУ. При моделировании и расчетах стратегий и режима обслуживания блочнокомплектного оборудования магистральных газопроводов использовано распределение Вейбулла. Расчет проводился для двух состояний БКУ: исправного и предотказного. Задача выбора оптимального режима обслуживания БКУ магистральных газопроводов решалась как оптимизационная задача, позволяет минимизировать удельные затраты на обслуживание БКУ при ограничениях, наложенных на коэффициент готовности оборудования. На основе созданной модели технического обслуживания исследовано влияние средней наработки в исправном состоянии и средней наработки в предотказном состоянии на показатели эффективности обслуживания в блочнокомплектном исполнении. Предложены методики расчетов параметров эксплуатационной надежности объектов магистральных газопроводов и оптимизации их обслуживания, определения коэффициента готовности оборудования компрессорных станций и оптимизации средних удельных затрат на обслуживание и ремонт и планирования количества технических обслуживании компрессорных станций. По результатам исследований разработана схема пакета оптимизации. Проведена апробация предложенных методик оптимального планирования ремонтно-восстановительных работ в ПРТП "Укргазэнергосервис" подтвердила достоверность полученных результатов.
Dissertation is devoted the creating rational decisions for repair work process equipment in block- ganged execution and improves efficiency of operation of facilities gas pipelines through the choice of rational strategies for maintenance. This mathematical model was established and conducted long-term experimental and analytical studies that allow identifying: rational block-partitioning equipment into separate elements, the choice of strategies and modes of service, selection of blocks assemblies and parts before failure.
Kouddane, Bouchra. "Évaluation non destructive optimale des bétons par couplage des méthodes CND." Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0084.
Understanding the in situ mechanical properties of concrete is essential for determining the structural capacity of both existing structures and new constructions. The recent methodology for assessing concrete strength in an existing structure involves integrating nondestructive testing (NDT) techniques with destructive measurements (coring) to establish a conversion model that correlates mechanical strength with nondestructive measurements. Subsequently, the conversion model is applied to estimate the local mechanical strength at each testing location based on the corresponding NDT values.The Rebound Hammer (RH) test and the Ultrasonic Pulse Velocity (UPV) test are widely used for estimating the compressive strength of concrete. However, the accuracy of the results obtained from these methods can be influenced by various factors. To mitigate these effects, the strategic combination of these two nondestructive tests provides an effective way to evaluate concrete strength in existing structures. Therefore, the aim of this thesis is to analyze the assessment methodology of structures by combining nondestructive techniques and to offer practical recommendations that can enhance the reliability of in-situ concrete strength. For this purpose, a simulator was developed to analyze the methodology of nondestructive assessment using an extensive dataset derived from various sources, including in-situ studies, as well as generated synthetic data.The primary contribution of this study is to propose a new model identification approach based on multi-objective optimization to predict the mean strength of concrete and its variability, based on the combination of NDT measurements. Monte Carlo simulations were carried out to check the performance by considering the uncertainty of NDT measurements and the variability of concrete. The results highlighted the effectiveness of the multi-objective method in determining both the average strength and the variability of strength compared to other approaches. Furthermore, this innovative approach enables enhanced accuracy in estimating concrete properties with a reduced number of cores compared to traditional methods.In addition, a thorough and accurate representation of the structure under examination can be achieved by carefully choosing the core locations. The efficacy of various suggested sample strategies has been evaluated in this study in order to select the optimal locations for the core extractions. Through these thorough comparisons, the study aims to discover the sampling plan that best aligns with the specific objectives of evaluating concrete strength. It is suggested to use variance sampling, which appears to be a suitable alternative for reducing inherent uncertainties in the nondestructive assessment process [...]
Ip, Wah-kin, and 葉華建. "A strategic evaluation of the aircraft maintenance business in Hong Kong: based on the study of the Hong KongAircraft Engineering Company Limited (HAECO)." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31268857.
Brem, Robert D. "Army inventory policy, the need for strategic change : an examination of Readiness Based Sparing for retail repair parts supply support /." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA341433.
"December 1997." Thesis advisor(s): Kevin R. Gue, Mike Boudreau. Includes bibliographical references (p. 79-82). Also available online.
林一鳴 and Yat-ming Lam. "A strategic evaluation of privatisation of professional services for housing maintenance." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31244348.
Patterson, Lester O., and Bardford C. Tonder. "External strategic analysis of the aviation maintenance, repair and overhaul (MRO) industry and potential market opportunities for Fleet Readiness Center Southwest." Monterey, California. Naval Postgraduate School, 2009. http://hdl.handle.net/10945/10444.
Approved for public release, distribution unlimited
The purpose of this MBA professional report is to supplement the long and short range strategic development efforts of Fleet Readiness Center Southwest (FRCSW) by providing command leadership with an analysis of the current aviation maintenance, repair, and overhaul (MRO) industry to identify potential expansion opportunities for FRCSW. Strategy development is dependent upon a solid, current and complete industrial analysis. An industrial analysis includes, 1) a definition of the industry, 2) a description of external forces acting upon the industry, 3) a description of the industry structure and 4) an examination of the key success factors that benchmark the requirements for a firm to stay competitive in the industry. These analyses provide FRCSW with the information required to leverage their core competencies to indentify and capitalize on potential opportunities in the industry. This study identifies emerging trends, presents projected forecasts, identifies external forces on both the military aviation MRO industry and FRCSW, and discusses those factors that are key to long term success in the military aviation MRO industry. The conclusions present a number of opportunities for FRCSW to explore in their effort to remain the Navy's premier aviation depot.
Patterson, Lester O. Tonder Bardford C. "External strategic analysis of the aviation maintenance, repair and overhaul (MRO) industry and potential market opportunities for Fleet Readiness Center Southwest." Monterey, Calif. : Naval Postgraduate School, 2009. http://edocs.nps.edu/npspubs/scholarly/MBAPR/2009/Jun/09Jun%5FPatterson%5FMBA.pdf.
Advisor(s): D'Addea Jones, Becky ; Euske, Ken J. "June 2009." "MBA professional report"--Cover. Description based on title screen as viewed on July 14, 2009. Author(s) subject terms: Fleet Readiness Center, Aviation Maintenance Repair and Overhaul, MRO, Aviation enterprise, Military Depots, Aviation Maintenance, FRCSW, NADEP Includes bibliographical references (p. 61-68). Also available in print.
Suchomel, Bruce Richard. "A strategic analysis of budgeting for integrated logistical support of defense systems." CSUSB ScholarWorks, 1991. https://scholarworks.lib.csusb.edu/etd-project/578.
Wirths, Oliver [Verfasser], Werner [Gutachter] Delfmann, Werner [Gutachter] Reinartz, and Martin [Gutachter] Fritze. "Business Model Innovation in the Aerospace Industry: Strategic Options for Maintenance, Repair, and Overhaul Firms / Oliver Wirths ; Gutachter: Werner Delfmann, Werner Reinartz, Martin Fritze." Köln : Universitäts- und Stadtbibliothek Köln, 2019. http://d-nb.info/1199537284/34.
GUILLAUMONT, SOPHIE. "Strategie ventilatoire des enfants atteints de mucoviscidose : etude au repas et a l'exercice musculaire." Montpellier 1, 1991. http://www.theses.fr/1991MON11086.
Åsblom, Fanny. "Carema Care? : En retorisk argumentations- och kriskommunikationsanalys av vårdföretaget Carema Care." Thesis, Uppsala universitet, Litteraturvetenskapliga institutionen, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-175713.
Hsu, Chih-peng, and 徐志鵬. "Pavement fragment repairand Pavement excavation repair Plant Operation Strategy." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/z9kyac.
國立中央大學
土木工程學系碩士在職專班
97
The highway pavement in Taiwan which is located in subtropics with warm and rainy climate is built by asphalt concrete in majority. The pavement structural failure causes by the excavation of survival piping system and increasing transportation density due to economical development is the reason which makes traffic accidents with the loss of human lives and wealth. It also makes the social expense increasingly. The citizen always complain about pavement service quality. The point of highway pavement maintenance are how to control the pavement repairing economically and efficiently、expense the fare which comes from the excavation of survival piping system properly、the rebuild or recovery activity of pavement、the promotion of pavement quality with rebuilding in time、the recovery of pavement in smooth and comfortable. We collect the excavation pavement recovery method and specification from the highway bureau in our country. The experience of execution condition and difficulty encountered in First Maintenance Office Directorate General of Highways Ministry of Transportation and Communications is the foundation of this analysis. We suggest the construction process of emergency potholes、pavement fragment repair and pavement excavation repair. It can improve the quality of pavement maintenance. The highway management ministry also can refer to our suggestion.
林峰邦. "Formation and analysis of dental handpiece repair marketing strategy." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/57455467147889067186.
逢甲大學
工業工程與系統管理學系
103
With the rise of health awareness, medical biotech industry not only government as a key development industry, as more biotech lined with bamboo shoots, but the vast majority are all health food, healthy food for their sales targets, but , famous throughout the world, with its strong manufacturing sector in Taiwan, medical device manufacturers in Taiwan, has a countable, not only because of regulatory requirements, more parts, to regard joining the biotech and manufacturing, the need for more technical Running with the threshold required to interact with quenching chain, so that Taiwan medical community used medical equipment, animal and plant tens of thousands to several million dollars, mostly through imports from agents, just as the automobile industry in general, its logistical needs maintenance is a highly anticipated industry, this research through data analysis to identify the underlying conduct marketing strategy, thus achieving performance growth targets.
Seely, Sue Ellen. "VOCA use as a communicative repair strategy: how will it generalize?" Thesis, 2006. http://hdl.handle.net/2152/3087.
Chen, Li-hong, and 陳立宏. "Multicast Link Repair Strategy with MAODV in Wireless Ad Hoc Networks." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/tg89u4.
國立中山大學
電機工程學系研究所
95
MAODV is a multicast version of AODV, a routing protocol in wireless Ad Hoc network. MAODV can use the same control packets as in AODV. Although MAODV can provide more efficient path, its ineffective link repair scheme may drastically decrease PDR (Packet Delivery Ratio) in the situation of node mobility. This ineffective repair scheme also increases redundant control overhead and the probability of packet collision. In this Thesis, a new link repair scheme, MLRS (Multicast Link Repair Strategy), based on the MAODV, is proposed. The main characteristic of MLRS is Local Repair which allows upstream node of a broken link to do the repair. In Local Repair, we add the IP address of a broken downstream node in the control packet. The upstream node of a broken link will broadcast the control packet. Any node that receives the control packet can determine if its upstream link is broken. The similar Local Repair scheme is applied to the upstream node until a branch node is reached. We use a modified GRPH packet to deliver the information of hop count from a branch node to all the nodes on the multicast tree. A node that receives the GRPH can estimate the duration of Local Repair. For the purpose of evaluation, we use NS-2 to simulate the MLRS. We classify the multicast tree topology with different degrees to analyze their effects on the MLRS. The simulation results show that the MLRS increases the PDR of fast-moving nodes and it also reduces the control overhead. Moreover, the MLRS increases the PDR of broken nodes due to upstream node mobility.
Shiao, Yung-kuei, and 蕭永貴. "The Study of house repair business strategy –The case study of Kaohsiung." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/78394688033745400697.
東吳大學
企業管理學系
93
The construction enterprise in Taiwan has been highly matured. Due to the tremendous housing-repair market, the construction enterprise require long-term operation so as to create great opportunity, therefore, it is necessary to develop to the direction of housing-repair. Nonetheless, study related to housing-repair mostly focus on technical or single operational management sides, few of those toward to integrated study. On the other hand, the difference between southern and northern Taiwan makes the theory completely unavailable. Besides, in the recent years, changes in Kaohsiung is rapid, the strategy for housing-repair operation also need to be adjusted simultaneously, and toward to the development of multiple management service side with the high-added value. This study is trying to understand the supply-demand condition and business operational mode to the residential housing-repair enterprise in Kaohsiung area, to induce operational strategy which could comply with actual need for the residential housing-repair enterprise, as a reference of those enterprises. Therefore, by utilizing the method of expert inquiry, this study conducted practical study referring to housing-repair enterprise supply & demand condition and issues of operational strategy. To the inquiry of housing-repair enterprise supply & demand condition, this study adopted reiterative statistics and Chi-Square Test of Homogeneity analysis. To the inquiry of operational strategy, analyzing by Analytic Hierarchy Process(AHP). The result of this study shows, with respect to the demand, customers in Kaohsiung area focus the prize to the housing-repair service, and the frequency of housing-repair is about half year to two year. With respect to the supply, most popular marketing method is by reputation advertisement, and customers’ decision heavily relies on the performance of professional staff as well as on-site introduction. On the other hand, housing-repair companies emphasize service quality in term of internal management, especially taking customer relationship management as a marketing-oriented operational idea. And most companies have their own operational strategy, and regard the importance of that in normal condition. With respect to the operational strategy of housing-repair enterprise, including low cost service, high professional service and quality. With respect to integrated method, including promotion of management efficiency & effectiveness and customer’s satisfaction, shorten working period, reduction of manpower, lower material cost, lower wage cost, upgrade added value, promote customer’s value, convenience of on-call service, fast repair service, effective market separation, house evaluation, reasonable and transparent prize, selection of target market, accident prevention safety and ecologic construction, etc. The above methods could take as a reference to operational policy for the residential housing-repair enterprise in the southern Taiwan.
Lee, Chung Lon, and 李家隆. "Strategy of Mobile Phone Repair Service: An Empirical Case of Company h." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/35s8xw.
國立清華大學
經營管理碩士在職專班
103
As smart phone industry competition is getting intensely, customers are not only demanding product appearance, functionality and quality increasingly but also demand after sale’s service quality and convenience more and more critical. After-sales service is not only just considered to be extra additional services, it became one of the considerations when customers buy product. Repair service is one of contact window of company and directly contact with customers, especially played an important role in customer satisfaction. In recent years, as the global economic downturn, companies in order to reduce the cost and provide better customer service quality and convenience, have adopted outsourcing to provide after-sales service, however, many of the outsourcers will difficultly to manage, as well as repair quality cannot be fully controlled, the company could not be more understanding the pulse of market changes and demand to cope with the design of future products. Therefore, this study will adopt hTC company case to explore, when hTC encounter after-sales service "cost reduction", hTC how to take into account the product "enhance the value".
Lin, Yu-Ling, and 林俞伶. "The Optimal Pricing Strategy of Manufacturer by Considering Distributor Providing Repair Service." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/99876139070267228011.
國立臺灣大學
工業工程學研究所
100
As green supply chains (GSCs) have setting significant attention and concern, this study investigates the optimal pricing policy of a manufacturer in the green supply chain. From the perspective of a manufacturer, a distributor collect used products from customers, and it can repair the recycled products and sell to the market or sell them to the manufacturer for remanufacturing. In addition, the distributor sells the usable products purchased from the manufacturer and repaired products to the customers at the same time. Hence, this study establishes a two-stage game model, considering the interaction between a manufacturer and a distributor within the context of Bertrand duopoly and price competition to find the optimal pricing policy of the manufacturer. Next, a sensitivity analysis is conducted to discuss how different valuations for a repaired product, collection rate, market size, ratio of new product cost to remanufactured cost and repairing cost influence the manufacturer profit and distributor profit. The results show that (1) When the valuation for a repair product is higher, the manufacturer should increase the purchase price of collected products (2) The manufacturer should collaborate with the distributor to increase the collection rate to increase its profit (3) The manufacturer should choose product under the condition of low valuation for a repair product, low new product cost, and high repairing cost to increase its profit.
Huang, Yu-Han, and 黃玉涵. "An Optimal Subsidy Strategy of Manufacturer by Considering Distributor Providing Repair Service." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/38238951188057715238.
國立臺灣大學
工業工程學研究所
101
Green supply chain (GrSC) has been receiving increasing attention in recent years. As remanufacturers needs more supply of used products, the economic incentive is required to attract customers to return their used products. This study investigates the optimal subsidy and pricing policy of a manufacturer in the green supply chain, suggesting that the flow of returned items is variable, and is affected by the amount of subsidy provided by the manufacturer. Moreover, this study considers a distributor who sells the usable products, purchased from the manufacturer, and repaired products, produced by the distributor, to the customers at the same time. A two-stage game model is proposed to derive the optimal pricing policy of the manufacturer, considering the interaction between a manufacturer and a distributor within the context of price competition. A sensitivity analysis is conducted to discuss how manufacturer’s and distributor’s profit will be influenced by consumer valuation, return rate and the cost ratio of new product to remanufactured product.
Li, Yu-Long, and 李育龍. "A Study on Marketing and Maintenance Strategy of Apple Authorized Repair Center." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/96afqm.
元智大學
管理碩士在職專班
107
With the rapid development of technology, online information circulation is fast, computer and electronic related products have become the must-have consumer goods for modern people. The market competition is very fierce and the speed of innovation is fast. Good products require good after-sales service. Apple Inc. is the most valuable brand in the world. The model, with the combination of experience marketing and service priority, is trusted by consumers, and has won the championship of the world's most valuable top 100 brands for six consecutive years. The former CEO of the company once encouraged me to ask me: "Do you want to take your current job as a job or a job as a business?" I replied: "I chose to work as a business. "Taiwan has come to the era of service economy, not only waiting for customers to come to the door, but also providing solutions for products and services, using services to create value. This study explores the need for outsourcing of corporate customers. Through interviews, the professional center of the repair center creates a difference in the project management mode and competes with the Apple Store. From the interview cases, the company's operations must be outsourced in addition to maintenance. The contract creates a profit for the camp. Gaining customer trust and recognition,"starting from the service, the development of the marketing, the results of the professional case",to provide customers with a one-time satisfaction of the full after-sales service needs, create a profitable business model.
Su, Shu-Li, and 蘇淑麗. "Applying Grid-based Strategy in Hole Repair Mechanism for Hybrid Wireless Sensor Networks." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/78505414863450150172.
淡江大學
資訊工程學系碩士在職專班
99
Wireless Sensor Networks (WSNs) can be widely applied in many fields. However, the WSNs probably exists some coverage holes due to the random deployment of static sensor nodes. Otherwise, the energy exhausted of sensor nodes would cause the hole problem in WSNs. Furthermore, these holes will degrade the performance of wireless sensor networks (WSNs). Hence, how to discover the position of the holes and utilize the information to improve the performance of WSNs is a significant issue. For this purpose, we proposed a grid-based hole repair mechanism in WSNs. In grid-based architecture, we use the grid-based in Hole Recovering mechanism. The sink will calculate the position of the holes and allocate the mobile node based on W value to recover the hole according to grid recovering information. The research will baesd on this theroy to achieve the purpose of improving the performance of the WSNs.
Rizzotto, Alessandro. "An integrated maintenance strategy for high voltage distribution substations in the present South African context." Thesis, 2012. http://hdl.handle.net/10210/6584.
The importance of maintenance in industry and specifically in the electrical distribution industry has never really been challenged. Maintenance has none of the glamour of other functions such as Marketing or Research, nor has it enjoyed close attention received by other aspects of business such as production and sales. Yet management remains painfully aware of the consequences and cost to the business when the maintenance job is not properly executed. What has, in recent years, exacerbated matters somewhat (in the electrical distribution business) is the reluctance of utility undertakings to invest heavily in a business that is to undergo a vast transformation arising from the creation of the National Electricity Regulator (NER). This will entail the amalgamation of some 400 plus different electricity distributors, by far the most in the guise of municipal undertakings, into a few Regional Distributors and Metro's. During this phase of uncertainty, the electricity departments of many municipalities have been allowed to deteriorate as maintenance and refurbishment funds were moved into other areas that would remain within the control of the municipalities. Eskom also has allowed, to a certain extent, its own distribution infrastructure to deteriorate over the last decade or so due to a focus being placed on the distribution and delivery of electric power to remote and informal settlement areas. Now on the eve of the re-organisation of the electricity supply industry into Regional Distributors and Metro's, the existing network infrastructures are far from being in an ideal situation to cope with the added business constraints to be placed on the supply industry under the scope of Regulation. This dissertation looks at an integrated maintenance strategy for one component of the electricity infrastructure namely, the distribution substation. The Electricity Supply Industry (ESI) is on the brink of vast changes that will reform the industry. Already there are cracks developing in the existing supply infrastructure resulting in power blackouts in several major centres. With the coming of the Regional Electricity Distributors, additional constraints will be placed on the supply industry. It is vital that maintenance management in the ESI start to work proactively in optimising maintenance to achieve a best return on hard gained funding in the coming years.
Wang, Chung-Cheng, and 王忠誠. "A Study on Naval Vessel’s Repair and Maintenance Strategy Led by Dynamical System Theory." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/55486926239173377410.
國立中山大學
資訊管理學系研究所
98
Different from terrestrial equipments (tanks and wheeled vehicles) and airborne crafts (planes or helicopters), the R & M (repair and maintenance) issues about naval vessels are profoundly related to their gigantic size, numerous operators, and thousands of various spare parts which individually have small quantity demand for logistic support. That is why the R & M of naval vessels is much more complicated. According to the Defense White Paper of 2009, the whole military force is going to be downsized. Meanwhile, the rescuing and relieving tasks for natural disasters have also been officially assigned to them. Therefore, the attendance rate of ships is increasing, which causes lower reliability and higher failure rate and consequently the rising R & M load. The dynamical complexity existing among the variables associated with R & M of naval vessels, which are non-linear, interconnecting and time-delaying, makes the system dynamics a very suitable theory for analyzing this kind of issue systematically. During the study, a model was built based on system dynamics. After reviewing related literatures and discussing with professionals in this field, the associated variables were defined and their casual diagrams were also established. We developed the stock-flow diagrams of three subsystems-- R & M process, man power, and material supply. Afterward these three subsystems were integrated into an R & M dynamical system model. Policy influence simulation and scenario design was carried out after basic tests confirming its validity. The results indicated that a higher R & M capacity could obviously reduce the number of ships stalled in shipyard and effectively increasing the discharge rate. Therefore we recommended the associated authority to boost R & M capacity by aggressive actions such as increasing the ratio of recruitment, building R & M knowledge management system and strengthening the education and training. For the follow-up research, we suggest more interviews with industrial personnel and experts, collecting R & M data for each type of naval vessel, deliberating the factors influencing the R & M from different aspects and appropriately defining system boundary in order to establish a model which is more similar to the real world. Therefore its simulated results can approach to the reality further, and the scenario analysis with conclusions induced from policy influence simulation can be more specific for the authorities. Keywords: repair and maintenance of naval vessels, system dynamics, strategy
Kuo-ShunChen and 陳國順. "Defect Repair Strategy of Multi-Stage Manufacturing System - A Case Study of H Company." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/mjq5s5.
Chiou, Jeng-Shiung, and 邱正雄. "A Study on the Improvement Strategy of Auto Repair Services out of Customer Complaints." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/9cj4we.
義守大學
管理碩博士班
106
This study employs a car managacturer’s “CSI Customer Response Scale” to discuss the prediction and prevention of customer complaints by maintenance and service personnel in automotive service plants while exploring the prediction and prevention of customer complaints by maintenance and service staffs from automotive service company. It seems that the services provided by maintenance or service staffs are not the same as what customers expect and concern. By comparing the processes identified by maintenance or service staffs are able to identify the problems of going wrong with the actual grievances from customers, the study aims to find the differences between them and give feedback to the staffs and reduce the probability of customer complaints. By forming an FMEA team consisting of experienced service specialists, the study utilizes the potential risks priority coefficient prediction on 15 items in service processes which may cause customer complaints. Then customer complaint cases for last three years are classified to confirm the differences between staffs and customers for rendering accurate recommendations to the company. As confirmed in this study, the predictions are consistent with the part of customer complaints, such as the quality of vehicles and service quality; as to the service processes in preparation and the customer demonstration facilities, the predictions are inconsistent with customer complaints. This result indicate that the predictions could help the company make sound adjustments on prevention measures of customer grievances.
Juin-Hong, Cherng, and 程君弘. "Grafting adult human olfactory stem cells as a therapeutic strategy to repair spinal cord injury." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/20120196834479055187.
國防醫學院
生物及解剖學研究所
93
Spinal cord injury is a major medical problem worldwide for scientists and clinicians. The failure of axons to regenerate in the adult central nervous system (CNS) has been attributed to a variety of factors including the glial scar, the presence of inhibitory factors and the lack of trophic factor support. Several strategies have been developed to rebuild the injured spinal cord in animals such as adding growth factors, providing bridges of peripheral nerves, olfactory ensheathing cells (OECs) or stem cells transplantation. Reviews these roles of transplantation, the recent discovery of OECs capable of generating central nervous system (CNS) tissues, coupled with success in neurotransplantation strategies, has renewed hope that repair and recovery from CNS trauma is possible. Based on results from several studies using OECs to promote CNS repair, our laboratory tried to recruit the human olfactory stem cells cultured from the human nasal polyp tissue, a common surgical specimen of patient’s nasal polyp in ear-nose-throat department. Several specific markers such as low affinity nerve growth factor receptor, p75NTR; oligodendrocyte marker 4, O4, schwann cell intermediate filament, S100-β, glial fibrillary aidic protein, GFAP were used to characterization after in vitro induced. Then, the human olfactory stem cells were transplanted into the spinal cord of the adult rats with complete spinal cord transection. The locomotor’s function of grafted animals were assessed by BBB score and already recovery to weight supporting; and the axonal regeneration were evaluated found by retrograde neuroanatornical tract tracer-Horseradish Peroxidase (HRP). Immunohistochemistry results prove the human olfactory stem cell survival and the new myelin formation after transplanted eight weeks at the beginning, and we believed the cells directly or indirectly promote the repair of injury. To our knowledge, we reprot for this frontier field that the improvement of hindlimb function after human olfactory stem cells transplantation in adult rats T8 transection injury. This work opens new avenue for the treatment of spinal cord injury with olfactory stem cells in human.
Tsai, Chiuan-lung, and 蔡全隆. "The study of nonexistence strategy, defensive impression management tactics, trust repair and leader-subordinate relational identity." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/65875142937976399557.
國立彰化師範大學
人力資源管理研究所
100
Past research about trust repair mainly explored simply one of the strategies to repair trust in a single study. In addition, few studies examined more than 2 strategies at a time, or interaction between strategies and trust. Since the extant literature has indicated that denial and apology of external attribution are more effective in repairing trust, the present study, therefore, aimed to compare the effects these two factors respectively have on trust repair. The interaction between Leader-subordinate relational identity and them were also examined. The data was collected with a quasi-experimental design and subjects were EMBA students of National Changhua University of Education. There were 132 valid samples in the end. To test the research hypotheses, confirmation factor analysis, correlation analysis, and analysis of covariance were used. The results revealed: (1) individuals would exhibit more trust if nonexistence strategy was adopted; (2) individuals would exhibit more trust if defensive impression management tactics was used; (3) nonexistence strategy was more influential than defensive impression management tactics was in repairing trust; and (4) there was no interaction between trust repair and leader-subordinate relational identity. Finally, based on the results, implications for practice and further research were discussed.
Stanczyk, Agata Anna, and 史思涵. "Towards an Urban Repair and Eco-generation Paradigm A case study of Taipei’s eco-city strategy." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/00298079739507276594.
國立臺灣大學
建築與城鄉研究所
100
Until recently, developers of Asian metropolitan cities have largely ignored the interconnection between nature and cities. During the early stages of urbanization in Taipei this lack of planning caused many of the current challenges faced by the city. As the movement to build more environmentally sustainable cities gains momentum as we head into the 21st century; so should the desire to upgrade existing cities to these new development aspirations. Sadly however, most of the attention primarily focuses on future cities. This thesis, on the other hand, focuses on the eco-regeneration of older cities, namely, Taipei. The strategy to regenerate the city using eco-puncture is due to the fact that repairing key locations will have the most positive impact. To achieve this endeavor the goals of this thesis are twofold; firstly to investigate Taipei ecosystem to gain a comprehensive understanding of its current and future developmental challenges. Lastly to form an eco-regeneration plan using eco-puncture methods, as acupuncture is the preferred method used in Chinese culture in the process of repairing.
Ping-Yueh, Hsiao, and 蕭秉岳. "A Burn-in and Warranty Strategy Minimizing the Manufacturing Cost for a Product under Imperfect Repair." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/7r697g.
國立成功大學
工業與資訊管理學系
106
In this study, an optimization model is developed to investigate the optimal burn-in time, warranty length and age reduction factor of a product from a manufacturer’s perspective, so that the mean of total product servicing cost is minimized. It is assumed that when the product fails, we conduct minimal repair during burn-in time. The products after burn-in are sold to the market, it is difficult for consumers to judge quality. Therefore, the warranty often plays an important role. If the product during warranty fails before bathtub curve first change point, then we conduct minimal repair. If the product fails after bathtub curve first change point, then we conduct imperfect repair. In this study, a virtual age model is used to express the status after imperfect repair. The degree of imperfect repair will generate different age reduction factors, and bring different age reduction factors into the failure rate. Out-of-warranty, if the product fails before its useful life limits, it causes customer dissatisfaction and incurs a penalty cost for the manufacturer. And Monte Carlo simulations were used to simulate the time-to-failures at different age-reducing factor failure rates to calculate the average number of failures after burn-in, warranty, and post-warranty throughout the product life cycle. We provide a numerical example to determine the optimal burn-in time, optimal warranty length, and optimal imperfect repair degree to minimize total cost. A sensitivity analysis is conducted to evaluate the effect of model parameters on the optimal solution.
Cheng, Hong-Min, and 鄭弘民. "Business Strategy for Maintenance and Repair Organization of Civil Aviation - A Case Study of the Studied Company." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/88467002608895939206.
元智大學
管理碩士在職專班
97
Air transport industry is significantly influenced by the economic performance. Since 21st century started, every airlines has been facing most of challenges in years. Especially with Crude oil prices continued to raise, it shows significant downturn in revenue income. Worse to came was late 2008; the “Financial crisis” has distinctly influenced people’s inclination to consuming. This has caused both air travelers and cargo businesses decreased. This financial crisis has caused tremendous Global economic recession, and the case study shows that the studied company also met critical challenges since established. By facing this situation, the company’s coping strategies are: increasing profit and reducing unnecessary cost. This can act two ways, firstly increasing income from customers’ aircraft: secondly using self-maintaining and out-sourcing in order to reduce the cost for company aircraft. Airplanes maintenance service is a long-term investment for the company, and it is crucial to efficiently control the cost at this stage. However, the most important in time is to increase maintenance performance. This study will focus on airplanes maintenance industry and organization of the company and it will analyze internal and external changes. Research unveils those issues will become company threat: -Industrial: Government has not completed the research in advance, thus it caused civil aviation maintenance and repair stations not been able to play the advantages of strategic alliance. -Study Company: maintenance organizations have frequent changes, with relevant accountabilities and responsibilities not clear. -Maintenance and repair station: Aircraft maintenance strategy was complicated. The information systems was not either intergraded accordingly. Plus, there are not enough trained and knowledgeable sales people to perform. Aircraft maintenance industry not merely as civil aviation itself, maintains its associated upstream and downstream industries to development of high-tech industrial base. However, characteristically it requires large funds and a very long-term investment period, but obviously lacks for the will of private investors. Government should be more aggressive to create the environment in order to help Taiwan become the Asia-Pacific regional operations center, APROC, in near future.
Rubenis, Niklavs Andris. "The Ethics of Making: Design for Reuse and Repair : Developing an alternative strategy for studio-based craft and design in a world full of stuff." Phd thesis, 2018. http://hdl.handle.net/1885/164029.
Sheldon, Catherine Adelle. "Image repair on the political front an experiment testing effects of communication strategy and performance history in a political faux pas/." 2006. http://purl.galileo.usg.edu/uga%5Fetd/sheldon%5Fcatherine%5Fa%5F200605%5Fma.
Huang, I.-Pin, and 黃依邠. "The Repair Strategy and Inventory Policy of The Global Logistics Management for After-Sales Service – A System Simulating Model for Motherboard Industry." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/yr55ra.
國立臺北科技大學
商業自動化與管理研究所
95
The global logistics management includes forward and reverse logistics. The businesses focused the integration of sourcing, making, and delivery in supply chain, and requested quick respondent time and low cost-down for forward logistics. Because the development of environmental consciousness and the regulation of various law in green supply chain, the enterprises have to reconsider reverse logistics in operation and respect the veiled value of reverse logistics in global logistics management. It is for catching the rapid transition of circumstances and keeping the strength of competition. The activities of reverse logistics include return, recycle, reuse, repair, and remanufacturing. For enforcing business competitiveness, it is more important to improve the return and repair process for the reparable product. Otherwise, the raise of consumer requirement and the severe competition between enterprises, it must shorten the repair time and increase the service quality. But it also needs to consider the operation cost at same time. The repair strategies and inventory policies are the influencing variables for balancing operation cost and service quility. In the past, the commerce and maintenance were divided into two processes for IT products. But it combines commerce with maintenance and repair for extending service satisfaction. The international enterprises have to face more strict challenges for taking responsibility to exchange or repair products. It costs a certain extent to hold high customer satisfaction. This study will measure the return and repair metrics in system cost and service level for repair strategy and inventory policy in global repair center.