Добірка наукової літератури з теми "Reinforcement fabrics"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Reinforcement fabrics".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Reinforcement fabrics"
Li, Xiaoying, Gaoming Jiang, Xiaolin Nie, Pibo Ma, and Zhe Gao. "Knitting Technologies And Tensile Properties Of A Novel Curved Flat-Knitted Three-Dimensional Spacer Fabrics." Autex Research Journal 15, no. 3 (September 1, 2015): 191–97. http://dx.doi.org/10.1515/aut-2015-0006.
Повний текст джерелаBel, Sylvain, Nahiene Hamila, and Philippe Boisse. "Analysis of Non-Crimp Fabric Composite Reinforcements Forming." Key Engineering Materials 504-506 (February 2012): 219–24. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.219.
Повний текст джерелаDabiryan, Hadi, Fatemeh Hasanalizade, and Mojtaba Sadighi. "Low-velocity impact behavior of composites reinforced with weft-knitted spacer glass fabrics." Journal of Industrial Textiles 49, no. 4 (July 9, 2018): 465–83. http://dx.doi.org/10.1177/1528083718787533.
Повний текст джерелаVolik, A. R., and Ya Ya Novitski. "Experimental studies of reinforced concrete beams with external reinforcement of the tensioned face using composite fabrics." Vesnik of Yanka Kupala State University of Grodno. Series 6. Engineering Science 12, no. 1 (September 10, 2022): 117–25. http://dx.doi.org/10.52275/2223-5396-2022-12-1-117-125.
Повний текст джерелаGarcia Filho, Fabio da Costa, Fernanda Santos da Luz, Lucio Fabio Cassiano Nascimento, Kestur Gundappa Satyanarayana, Jaroslaw Wieslaw Drelich, and Sergio Neves Monteiro. "Mechanical Properties of Boehmeria nivea Natural Fabric Reinforced Epoxy Matrix Composite Prepared by Vacuum-Assisted Resin Infusion Molding." Polymers 12, no. 6 (June 9, 2020): 1311. http://dx.doi.org/10.3390/polym12061311.
Повний текст джерелаPham, Döbrich, Trümper, Gereke, and Cherif. "Numerical Modelling of the Mechanical Behaviour of Biaxial Weft-Knitted Fabrics on Different Length Scales." Materials 12, no. 22 (November 8, 2019): 3693. http://dx.doi.org/10.3390/ma12223693.
Повний текст джерелаLEMMI, TSEGAYE SH, and MARCIN BARBURSKI. "THERMAL AGING EFFECT ON THE PHYSIO-MECHANICAL PROPERTIES OF TEXTILES USED FOR THE REINFORCEMENT OF CONVEYOR BELTS." Fibres and Textiles 30, no. 1 (2023): 105–9. http://dx.doi.org/10.15240/tul/008/2023-1-019.
Повний текст джерелаEl-Hage, Yue, Simon Hind, and François Robitaille. "Thermal conductivity of textile reinforcements for composites." Journal of Textiles and Fibrous Materials 1 (January 1, 2018): 251522111775115. http://dx.doi.org/10.1177/2515221117751154.
Повний текст джерелаBekisli, Burak, Johann Pancrace, and Herman F. Nied. "Mechanical Behavior of Highly-Flexible Elastomeric Composites with Knitted-Fabric Reinforcement." Key Engineering Materials 504-506 (February 2012): 1123–28. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.1123.
Повний текст джерелаHasan, K. M. Faridul, Péter György Horváth, and Tibor Alpár. "Potential fabric-reinforced composites: a comprehensive review." Journal of Materials Science 56, no. 26 (May 26, 2021): 14381–415. http://dx.doi.org/10.1007/s10853-021-06177-6.
Повний текст джерелаДисертації з теми "Reinforcement fabrics"
Peled, Alva, Zvi Cohen, Steffen Janetzko, and Thomas Gries. "Hybrid Fabrics as Cement Matrix Reinforcement." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-77694.
Повний текст джерелаAlami, Fikri. "CFRP fabrics as internal reinforcement in concrete beams." Thesis, University of Southampton, 2017. https://eprints.soton.ac.uk/418337/.
Повний текст джерелаGeorgallides, Christoforos. "Design production assessment of multilayer fabrics for composite materials reinforcement." Thesis, University of Manchester, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.603311.
Повний текст джерелаBU, JLDAIN HAFETH. "Behaviour and Inspection of Novel Non-Crimp Dry Thick Reinforcement Fabrics." Thesis, Université d'Ottawa / University of Ottawa, 2015. http://hdl.handle.net/10393/32383.
Повний текст джерелаKostova, Kaloyana Zdravkova. "Design and constructability of fabric-formed concrete elements reinforced with FRP materials." Thesis, University of Bath, 2016. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.707574.
Повний текст джерелаLi, Mengru. "Development and characterization of 3D warp interlock fabrics as reinforcements for protective solutions against stabbing." Thesis, Lille, 2021. http://www.theses.fr/2021LILUI010.
Повний текст джерелаAn increasing demand for materials used for stab protection has been expressed to provide more protective, flexibility and lightweight. Researchers have mainly focused on studies about stab resistance of soft body armour based upon technical textile fibres and 2D fabrics. However, the soft protective materials based on 3D fabrics have been rarely study in recent research works, especially those revealing that 3D woven architectures can play a decisive role during stab impact. 3D warp interlock fabrics (3DWIFs) can be used in a soft vest for anti-stab applications. The overall aim of this current research has been oriented to explore different design of 3DWIFs that provide the more efficient protective solution. Hence, this thesis has been concentrated on both the manufacturing process parameters and the resulted product parameters of the 3DWIFs made with HMWPE yarns. The production process parameters have been studied to optimize the manufacturing and the mechanical properties of 3DWIFs. The product parameters of 3DWIFs have been investigated to find the optimized combination for the best protective resistance against stabbing. The four main categories of 3D warp interlock fabrics architectures as : A/T, A/L, O/T, and O/L, were woven by twisted high molecular weight polyethylene (HMWPE) yarns. The mechanical characteristics of 3DWIFs were systematically tested and compared. Besides, a dedicated experimental study has been performed on 3DWIFs submitted to low-speed impact, including single-stab and double-stab properties in terms of depth of penetration and trauma. The double-pass stabbing tests are complementary to single-pass stabbing tests. It was experimentally concluded that the orthogonal/through-the-thickness interlock fabric has a good stab resistance. Meanwhile, the links among stab resistance, physical properties, and mechanical properties of 3DWIFs have been analysed
Wu, Zijie. "Damage tolerance study of carbon fibre/RTM6 composites toughened with thermoplastic-coated fabric reinforcement." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/damage-tolerance-study-of-carbon-fibrertm6-composites-toughened-with-thermoplasticcoated-fabric-reinforcement(0a596f56-3143-4bf0-993f-34ee773518c9).html.
Повний текст джерелаBillows, Trevor Norman Stanley. "Flexural strengthening of reinforced concrete beams with fabric reinforced cementitious mortar : effect of reinforcement ratios." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/60139.
Повний текст джерелаApplied Science, Faculty of
Engineering, School of (Okanagan)
Graduate
Navidpour, Mansour. "Reinforced Concrete Shear Walls with Welded Wire Grids as Boundary Element Transverse Reinforcement." Thesis, Université d'Ottawa / University of Ottawa, 2018. http://hdl.handle.net/10393/37702.
Повний текст джерелаArab, Rabah. "Modélisation des massifs renforcés sollicités localement en tete." Grenoble 1, 1997. http://www.theses.fr/1997GRE10001.
Повний текст джерелаКниги з теми "Reinforcement fabrics"
Georgallides, C. Design production assessment of multilayer fabrics forcompositematerials reinforcement. Manchester: UMIST, 1993.
Знайти повний текст джерелаTony, Hulett, and Concrete Society, eds. The structural use of steel fabric reinforcement in ground-supported concrete floors. Camberley: Concrete Society, 2004.
Знайти повний текст джерелаAllison, R. E. Fabric reinforcement to prevent reflection cracking: SR-5, contract 0414, Cowlitz River to SR-506 I/C. [Olympia, Wash.]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1989.
Знайти повний текст джерелаWelded steel wire fabric for concrete reinforcement from Italy, Mexico, and Venezuela: Determinations of the Commission in investigations nos. 701-TA-261(A), 263(A), and 264(A) (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations : determinations of the Commission in investigations nos. 731-TA-289(A)-291(A) (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations. Washington, DC: U.S. International Trade Commission, 1986.
Знайти повний текст джерелаGhosh, Swapan Kumar. Technical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Woodhead Publishing India PVT. LTD, 2018.
Знайти повний текст джерелаTechnical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Taylor & Francis Group, 2016.
Знайти повний текст джерелаGhosh, Swapan Kumar. Technical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Woodhead Publishing India PVT. LTD, 2018.
Знайти повний текст джерелаGhosh, Swapan Kumar. Technical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Woodhead Publishing India PVT. LTD, 2016.
Знайти повний текст джерелаGhosh, Swapan Kumar. Technical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Woodhead Publishing India PVT. LTD, 2018.
Знайти повний текст джерелаGhosh, Swapan Kumar. Technical Handbook on Bituminized Jute Paving Fabric: A Partial Substitute and Reinforcement of Bitumen Mastic. Woodhead Publishing India PVT. LTD, 2018.
Знайти повний текст джерелаЧастини книг з теми "Reinforcement fabrics"
Gooch, Jan W. "Reinforcement Fabrics." In Encyclopedic Dictionary of Polymers, 621. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_9890.
Повний текст джерелаGooch, Jan W. "Fabrics, Reinforcement." In Encyclopedic Dictionary of Polymers, 293. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4744.
Повний текст джерелаNewton, Peter H. "Steel Fabric Reinforcement To BS 4483." In Structural Detailing, 154. London: Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-07253-8_20.
Повний текст джерелаContamine, Raphaël, Amir Si Larbi, and Patrice Hamelin. "Matrix and Fabric Impregnation Influence on Textile Reinforcement Concrete Behaviour." In Advances in FRP Composites in Civil Engineering, 77–80. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17487-2_14.
Повний текст джерелаMonteiro, Sergio N., Frederico M. Margem, Glenio F. Daniel, Vinícius O. Barbosa, André R. Gomes, and Victor B. de Souza. "The Dimensional Characterization of Jute Fabric Strips for Reinforcement in Composite Polymeric." In Characterization of Minerals, Metals, and Materials 2017, 33–40. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51382-9_5.
Повний текст джерелаSreekeshava, K. S., A. S. Arunkumar, and B. V. Ravishankar. "Experimental Studies on Brick Masonry Elements with Geo-fabric Bed Joint Reinforcement." In Advances in Sustainable Construction Materials, 33–41. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3361-7_3.
Повний текст джерелаMahpour, Ali Rakhsh, Josep Claramunt, Mònica Ardanuy, and Joan Ramon Rosell. "Flax Fabric-Reinforcement Lime Composite as a Strengthening System for Masonry Materials: Study of Adhesion." In International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, 1297–306. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-33211-1_116.
Повний текст джерелаda Cruz Demosthenes, Luana Cristyne, Lucio Fabio Cassiano Nascimento, Michelle Souza Oliveira, Fabio da Costa Garcia Filho, Artur Camposo Pereira, Fernanda Santos da Luz, Édio Pereira Lima, Leandro Alberto da Cruz Demosthenes, and Sergio Neves Monteiro. "Evaluation of Buriti Fabric as Reinforcement of Polymeric Matrix Composite for Ballistic Application as Multilayered Armor System." In Green Materials Engineering, 177–83. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10383-5_20.
Повний текст джерелаBharath, K. N., S. Basavarajappa, S. Indran, and J. S. Binoj. "Effect of Surface Modification on Characteristics of Naturally Woven Coconut Leaf Sheath Fabric as Potential Reinforcement of Composites." In Biofibers and Biopolymers for Biocomposites, 285–94. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-40301-0_14.
Повний текст джерела"Reinforcement fabrics." In Encyclopedic Dictionary of Polymers, 828. New York, NY: Springer New York, 2007. http://dx.doi.org/10.1007/978-0-387-30160-0_9708.
Повний текст джерелаТези доповідей конференцій з теми "Reinforcement fabrics"
Hwang, Hyun-Sik, Brendan A. Patterson, Mohammad H. Malakooti, and Henry A. Sodano. "Modification of Pullout Behavior of Kevlar Fabric by Zinc Oxide Nanowire Reinforcement." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-66836.
Повний текст джерелаBinetruy, Christophe, Sébastien Comas-Cardona, and Fan Zhang. "Identification and Modeling of Variability in Fabrics Used as Reinforcement in Polymer Composites: Influence on Transport and Mechanical Properties." In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82581.
Повний текст джерелаBirsan, Iulian-Gabriel, Adrian Circiumaru, Vasile Bria, Igor Roman, and Victor Ungureanu. "Mechanical Characterization of Fiber Fabrics." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-25300.
Повний текст джерелаRakhsh Mahpour, Ali, Monica Ardanuy, Heura Ventura, Joan Ramon Rosell, and Josep Claramunt. "Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes." In 4th International Conference on Bio-Based Building Materials. Switzerland: Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.480.
Повний текст джерела"Flexural Behavior of Masonry Walls Strengthened With Composite Fabrics." In SP-138: Fiber-Reinforced-Plastic Reinforcement for Concrete Structures - International Symposium. American Concrete Institute, 1993. http://dx.doi.org/10.14359/3936.
Повний текст джерелаLI, A., C. DIAGANA, Y. DELMAS, and B. GEDALIA. "SHEAR PERFORMANCE WITH EXTERNALLY BONDED CARBON FIBRE FABRICS." In Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures (FRPRCS–6). World Scientific Publishing Company, 2003. http://dx.doi.org/10.1142/9789812704863_0046.
Повний текст джерела"Tension and Compression Strengthening of RC Members by CFRP Composite Fabrics." In SP-275: Fiber-Reinforced Polymer Reinforcement for Concrete Structures 10th International Symposium. American Concrete Institute, 2011. http://dx.doi.org/10.14359/51682479.
Повний текст джерела"Finite Element Modelling of RC Beams Retrofitted with CFRP Fabrics." In SP-230: 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures. American Concrete Institute, 2005. http://dx.doi.org/10.14359/14850.
Повний текст джерелаHamila, Nahiene, Philippe Boisse, and Sylvain Chatel. "Meso-Macro Simulations of Textile Composite Forming." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72382.
Повний текст джерелаDemirci, Emrah, Memis¸ Acar, Behnam Pourdeyhimi, and Vadim V. Silberschmidt. "Anisotropic Elastic-Plastic Mechanical Properties of Thermally Bonded Bicomponent Fibre Nonwovens." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24664.
Повний текст джерелаЗвіти організацій з теми "Reinforcement fabrics"
Wang, Youqi, and Xiaojiang J. Xin. Ballistic Strength of Multi-Layer Fabric System with Through-The-Thickness Reinforcement. Fort Belvoir, VA: Defense Technical Information Center, April 2013. http://dx.doi.org/10.21236/ada584508.
Повний текст джерелаCrameri, Sam, Filip Stojcevski, and Clara Usma-Mansfield. Effect of Fabric Reinforcement on the Flexural Properties of EPS-Core Surfboard Constructions. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317476.
Повний текст джерела