Готові списки джерел за темами / Reentrant Cavity

Добірка наукової літератури з теми "Reentrant Cavity"

Автор: Grafiati

Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Reentrant Cavity".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Reentrant Cavity"

Migliuolo, M., and T. G. Castner. "Novel tunable reentrant microwave cavity." Review of Scientific Instruments 59, no. 2 (February 1988): 388–90. http://dx.doi.org/10.1063/1.1140216.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Paoloni, Claudio. "Periodically Allocated Reentrant Cavity Klystron." IEEE Transactions on Electron Devices 61, no. 6 (June 2014): 1687–91. http://dx.doi.org/10.1109/ted.2014.2301813.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Uhlman, James S. "A Note on the Development of a Nonlinear Axisymmetric Reentrant Jet Cavitation Model." Journal of Ship Research 50, no. 03 (September 1, 2006): 259–67. http://dx.doi.org/10.5957/jsr.2006.50.3.259.

Повний текст джерела

Анотація:

The boundary integral method is formulated for the problem of the fully nonlinear, axisymmetric potential flow past a body of revolution. A model is devised for the exact formulation of the reentrant jet cavity closure condition. It is demonstrated that the solution obtained is essentially independent of the length selected for the jet. Results obtained using the reentrant jet cavity closure model are compared with those obtained using the Riabouchinsky-type cavity closure model used by Uhlman (1987, 1989) and with experimental results. The agreement between the two cavity closure models is seen to be excellent, with the Riabouchinsky wall results deviating only slightly at short cavity lengths. The agreement of the reentrant jet model with the experimental data is also excellent, although the addition of the viscous component of drag is seen to be required for cavitating cones of sufficiently small half-angle.

Стилі APA, Harvard, Vancouver, ISO та ін.

Sheng-Lung Huang, Ying-Hui Chen, Pi-Ling Huang, Jui-Yun Yi, and Huy-Zu Cheng. "Multi-reentrant nonplanar ring laser cavity." IEEE Journal of Quantum Electronics 38, no. 10 (October 2002): 1301–8. http://dx.doi.org/10.1109/jqe.2002.802955.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Carvalho, N. C., Y. Fan, J.-M. Le Floch, and M. E. Tobar. "Piezoelectric voltage coupled reentrant cavity resonator." Review of Scientific Instruments 85, no. 10 (October 2014): 104705. http://dx.doi.org/10.1063/1.4897482.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tiwari, Ashish Kumar, and P. R. Hannurkar. "Electromagnetic Analysis of Reentrant Klystron Cavity." Journal of Infrared, Millimeter, and Terahertz Waves 31, no. 10 (August 25, 2010): 1221–24. http://dx.doi.org/10.1007/s10762-010-9701-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bansiwal, Ashok, Sushil Raina, K. J. Vinoy, and Subrata Kumar Datta. "Effect of Beam tunnels on Resonant Frequency of Cylindrical Reentrant Cavity." Defence Science Journal 71, no. 03 (May 17, 2021): 332–36. http://dx.doi.org/10.14429/dsj.71.16814.

Повний текст джерела

Анотація:

Analytical formulations for the resonant frequency of a reentrant cavity for klystron are available in the literature only for such cavities having a single beam-tunnel. An improved analytical formulation has been proposed in this paper for the calculation of cavity gap-capacitance of reentrant cavities having single and multiple beam-tunnels and its effects on the resonant frequency are studied. The results obtained through analysis have been validated against those obtained from the 3D electromagnetic field simulations and measurements. The proposed analytical formulation provides good estimation of resonant frequency of cavity with single and multiple beam-tunnels.

Стилі APA, Harvard, Vancouver, ISO та ін.

Nouroozi, M., M. Pasandidehfard, and M. H. Djavareshkian. "Simulation of Partial and Supercavitating Flows around Axisymmetric and Quasi-3D Bodies by Boundary Element Method Using Simple and Reentrant Jet Models at the Closure Zone of Cavity." Mathematical Problems in Engineering 2016 (2016): 1–13. http://dx.doi.org/10.1155/2016/1593849.

Повний текст джерела

Анотація:

A fixed-length Boundary Element Method (BEM) is used to investigate the super- and partial cavitating flows around various axisymmetric bodies using simple and reentrant jet models at the closure zone of cavity. Also, a simple algorithm is proposed to model the quasi-3D cavitating flows over elliptical-head bodies using the axisymmetric method. Cavity and reentrant jet lengths are the inputs of the problem and the cavity shape and cavitation number are some of the outputs of this simulation. A numerical modeling based on Navier-Stokes equations using commercial CFD code (Fluent) is performed to evaluate the BEM results (in 2D and 3D cases). The cavitation properties approximated by the present research study (especially with the reentrant jet model) are very close to the results of other experimental and numerical solutions. The need for a very short time (only a few minutes) to reach the desirable convergence and relatively good accuracy are the main advantages of this method.

Стилі APA, Harvard, Vancouver, ISO та ін.

Seo, Dongjin, Alex M. Schrader, Szu-Ying Chen, Yair Kaufman, Thomas R. Cristiani, Steven H. Page, Peter H. Koenig, Yonas Gizaw, Dong Woog Lee, and Jacob N. Israelachvili. "Rates of cavity filling by liquids." Proceedings of the National Academy of Sciences 115, no. 32 (July 19, 2018): 8070–75. http://dx.doi.org/10.1073/pnas.1804437115.

Повний текст джерела

Анотація:

Understanding the fundamental wetting behavior of liquids on surfaces with pores or cavities provides insights into the wetting phenomena associated with rough or patterned surfaces, such as skin and fabrics, as well as the development of everyday products such as ointments and paints, and industrial applications such as enhanced oil recovery and pitting during chemical mechanical polishing. We have studied, both experimentally and theoretically, the dynamics of the transitions from the unfilled/partially filled (Cassie–Baxter) wetting state to the fully filled (Wenzel) wetting state on intrinsically hydrophilic surfaces (intrinsic water contact angle <90°, where the Wenzel state is always the thermodynamically favorable state, while a temporary metastable Cassie–Baxter state can also exist) to determine the variables that control the rates of such transitions. We prepared silicon wafers with cylindrical cavities of different geometries and immersed them in bulk water. With bright-field and confocal fluorescence microscopy, we observed the details of, and the rates associated with, water penetration into the cavities from the bulk. We find that unconnected, reentrant cavities (i.e., cavities that open up below the surface) have the slowest cavity-filling rates, while connected or non-reentrant cavities undergo very rapid transitions. Using these unconnected, reentrant cavities, we identified the variables that affect cavity-filling rates: (i) the intrinsic contact angle, (ii) the concentration of dissolved air in the bulk water phase (i.e., aeration), (iii) the liquid volatility that determines the rate of capillary condensation inside the cavities, and (iv) the presence of surfactants.

Стилі APA, Harvard, Vancouver, ISO та ін.

Fan, Yaohui, Zhengyu Zhang, Natalia C. Carvalho, Jean-Michel Le Floch, Qingxiao Shan, and Michael E. Tobar. "Investigation of Higher Order Reentrant Modes of a Cylindrical Reentrant-Ring Cavity Resonator." IEEE Transactions on Microwave Theory and Techniques 62, no. 8 (August 2014): 1657–62. http://dx.doi.org/10.1109/tmtt.2014.2331625.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Reentrant Cavity"

Courtois, Jérémie. "Développements de systèmes multipassages pour application à la spectroscopie d'absorption : Cavity Ring Down Spectroscopy multimode et cellules à passages multiples." Phd thesis, Université Paris Sud - Paris XI, 2009. http://tel.archives-ouvertes.fr/tel-00458101.

Повний текст джерела

Анотація:

La spectroscopie d'absorption par mesure du temps de vie des photons piégés dans une cavité optique haute-finesse, ou Cavity Ring Down Spectroscopy (CRDS), compte parmi les outils de diagnostic optique les plus sensibles. L'excitation « mode matchée » d'un laser continu rapidement et continûment balayé (~4 THz.s-1 durant ~2 ms), i.e. la cw-CRDS monomode rapide, garantit à la technique ses meilleures performances en termes de limites de détectivité avec, en contrepartie, des points de mesures séparés de l'Intervalle Spectral Libre du résonateur (ISL=c/2L) : le dosage d'environnements basse pression requiert de longues cavités. Cette étude originale propose de mettre à profit la structure transverse du résonateur afin de rendre possible la miniaturisation du dispositif de cw-CRDS rapide. L'excitation multimode d'une cavité fractionnellement dégénérée (dite de taille « magique »), ici présentée, permet de bénéficier d'un gain d'échantillonnage spectral qui vaut l'ordre réentrant N employé. Nous développons deux schémas d'injection multimode : l'injection multimode axiale et l'injection multimode réentrante, dite dans ce dernier cas hors de l'axe optique, de telles cavités et nous en étudions les principales différences. Une étude détaillée du champ intracavité existant aux N résonances constitutives de l'ISL est proposée afin de rendre compte des limites de détectivités associées à ces deux schémas d'injection multimode sensiblement distincts. Une seconde partie de ce travail de thèse est dédiée à caractériser de façon approfondie l'observation des profils spatiaux intracavités formés en injection hors axe lorsque la cavité souffre d'un faible astigmatisme (ΔR/R~2 %) : on parle de profil de Lissajous. Cette étude rend compte des mécanismes fondamentaux, telle la coïncidence particulière de modes particuliers par dispersion modale, qui aboutissent en un intervalle millimétrique de dégénérescence. Celui-ci est le siège d'une succession de profils transverses de Lissajous symétriques les uns des autres de part et d'autre d'une taille particulière de cavité : nous en précisons les causes. Le résiduel astigmatisme ainsi mis en évidence et mesuré permet, en outre, d'expliquer la disparition des oscillations Doppler normalement présentent en début de décroissance ring down dans ce type d'injection dynamique. De façon connexe, nous développons plusieurs types de cellules multipassages non-résonantes comme alternative à la CRDS pour le dosage d'environnements hostiles.

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Ying-Hui, and 陳穎慧. "The Study of a Multi-reentrant Two-mirror Ring Laser Cavity." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/14685396107668187846.

Повний текст джерела

Анотація:

碩士
國立中山大學
光電工程研究所
89
Diode laser pumped solid state laser is compact, and can generate high peak power laser with good output mode. It has been applied extensively in electronics, communication, and medical treatment in recent years. The purpose of this study is to develop a compact and practical ring laser system. The multi-reentrant ring laser system developed in this work composes of two spherical mirrors and a gain medium where the conventional ring laser systems have at least three mirrors to construct the laser cavity. The laser system is more compact and simple than conventional ring laser systems. It can be used for producing single frequency green and blue lasers. The laser system can also be applied in aviation, trace detection as well as compact picosecond mode-locked laser. We not only prove that the multi-reentrant laser system is feasible theoretically and experimentally, but also use the fundamental laser theory to find the relation among cavity length, number of points, number of circulation, and the distance between center of gain medium and optical axis. The exact solution we obtained is experimentally verified with good agreement. A comparison between exact solution and paraxial approximation is also performed. The beam paths observing from the top, side, and end view are analyzed for various multi-reentrant laser cavities. The stability of the cavity is numerically analyzed and experimentally verified with good agreement, too. Finally, the differences in cavity configuration between TEM01 mode and the figure-8 mode are compared in this thesis.

Стилі APA, Harvard, Vancouver, ISO та ін.

Tuan, Hung-Tsang, and 段宏昌. "Theoretical analysis of reentrant two-mirror non-planar ring laser cavity." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/57283902729002202789.

Повний текст джерела

Анотація:

博士
國立中山大學
光電工程研究所
94
Abstract In this dissertation a rigorous analysis is performed on the reentrant non-planar ring laser cavity constructed by the Herriott-type multi-pass cell. Since the non-planar ring cavity is a non-orthogonal cavity, so the ABCD matrix method used to analyze the beam propagation is not valid. A rigorous method using Gaussian beam propagation is needed. The beam rotation, astigmatism, and spherical aberration are considered to obtain a self-consistent solution of the Gaussian beam. It turns out that spherical aberration is a very important issue for this non-planar resonator. Without taking into account the spherical aberration, a stable resonator would be difficult to realize. By using a self-consistent Gaussian beam propagation method, the characteristic of laser beam was analyzed and compared with that of the ABCD approximation method. The reentrant ring cavity is very sensitive to cavity length, especially when the planar and non-planar configurations have the same output beams; therefore, it is very important to consider a rigorous method using Gaussian beam propagation. By considering the coordinate transformation of the beam after mirror reflection, a non-planar figure-8 ring cavity can be treated as an orthogonal cavity except for an exchange of tangential and Sagittal planes after each reflection. A simple astigmatic Gaussian beam approach is used to analyze the non-planar figure-8 ring cavity, and an analytic solution is obtained. For the general case of the multi-pass non-planar ring cavity, a general astigmatic Gaussian beam approach is used to treat the problem. The general form of mirror phase shift is used, and two important differences compared to the ABCD method were found. Firstly, the spot size is always elliptical while the spot size is circular using the ABCD approximation. Secondly, a second stable region is found in the cavity, the width of the second stable region is smaller than the first stable regi

Стилі APA, Harvard, Vancouver, ISO та ін.

Bansiwal, Ashok. "Equivalent Circuit Analyses and Methods to Enhance Bandwidth of Klystron Reentrant Cavities." Thesis, 2020. https://etd.iisc.ac.in/handle/2005/4659.

Повний текст джерела

Анотація:

Klystron is used as an amplifier at microwave frequency range. Klystrons use cylindrical or rectangular reentrant cavities in their interaction structure. Characteristics of reentrant cavity can be defined using parameters such as resonant frequency, characteristic shunt impedance and quality factor, which can be computed either using 3D electromagnetic field solver or using equivalent circuit analysis. An equivalent circuit analysis is often preferred to quickly arrive at initial dimensions of the cavity as well as to analyse the effect of various dimensional variations on the cavity parameters. Equivalent circuit analysis for the calculation of these parameters is available in the literature for cylindrical reentrant cavity with single beam-tunnel and single constituent material. However, practical cavities are normally made with dissimilar materials and have multiple beam-tunnels as in the case of multiple-beam klystron. A new formulation has been proposed for accounting the effects of single and multiple beam-tunnels in the calculation of cavity gap capacitance. Proposed formulation provides better estimation of resonant frequency for the cavities with multiple beam-tunnels as compared to that from the existing analysis. A new analysis has also been proposed for the calculation of unloaded quality factor of cylindrical reentrant cavity using Wheeler’s incremental inductance rule. Analysis provides estimation of quality factor within 15% deviation compared with simulations. In addition to analysing the cavities with dissimilar materials, the proposed approach provides better estimation of quality factor compared with existing approaches. Since a similar equivalent circuit analysis was not available for the rectangular reentrant cavity, the same is proposed here through geometric approximation and analytical approaches. Both the analyses have been proposed for a rectangular reentrant cavity with circular cylindrical ferrule and operating in the TM110 mode. Unloaded quality factor has been obtained using Wheeler’s incremental inductance rule. Analyses, through geometric approximation and analytical approaches, estimate resonant frequencies within 3% and 4.5% deviations, characteristic shunt impedance within 17% and 13% deviations, and unloaded quality factor within 15% and 14% deviations, respectively, compared with 3D electromagnetic simulations. The proposed analyses have also been validated against measurements and a good agreement has been obtained. Klystrons inherently suffer from bandwidth limitation and a lot of research is going on to enhance its instantaneous bandwidth. Bandwidth of klystron depends primarily on the quality factor of the output cavity circuit. Here, three methods for enhancing the bandwidth of a klystron have been proposed. The first method utilises tailoring the surface roughness, by which the unloaded quality factor of the cavities could be reduced by a maximum of 48%. In the second method, a ridge-loaded rectangular and cylindrical reentrant cavity has been proposed where the quality factor could be reduced by maximum of 80%. In the third method, a post-loaded rectangular reentrant cavity has been proposed to have even higher reduction in the quality factor (upto 90%). Measurements have been carried out on unloaded, ridge-loaded and post-loaded rectangular reentrant cavities for the validation of proposed methods. Measured unloaded quality factors have been found within 10% deviations compared with those obtained through the simulations. Equivalent circuit analyses and methods for reducing the quality factor of reentrant cavities proposed in the thesis will be useful for klystron designers to arrive at preliminary geometrical parameters of cylindrical or rectangular reentrant cavities with dissimilar constituent materials and to bolster their efforts to meet broadband operation.
Defense Research and Development Organization (DRDO)

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Reentrant Cavity"

Baker-Jarvis, James. Dielectric measurements using a reentrant cavity: Mode-matching analysis. Boulder, Colo: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1996.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Konstantinou, Katerina. Reentrant resonant cavity as a moisture sensor for single grains. Manchester: UMIST, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Reentrant Cavity"

Chae, Gyoo-Soo, and Joong-Soo Lim. "Design of a Low-Profile Spiral Antenna Using a Reentrant Cavity." In Communications in Computer and Information Science, 204–8. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-35251-5_28.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Santosh Kumar, M., Chaitali Koley, Santigopal Maity, A. K. Bandyopadhyay, Vatsav Kolluru, and Debashish Pal. "Design of Radial Reentrant Cavity for V-Band Vacuum Microwave Devices." In Lecture Notes in Electrical Engineering, 691–97. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0275-7_56.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yasui, Toshiaki, Miki Hiramatsu, Hirokazu Tahara, Ken-ichi Onoe, Yasuji Tsubakishita, and Takao Yoshikawa. "DEVELOPMENT OF A REENTRANT-CAVITY-TYPE ELECTRON CYCLOTRON RESONANCE (ECR) ION SOURCE AND ITS APPLICATIONS FOR MATERIAL PROCESSING." In Laser and Ion Beam Modification of Materials, 89–91. Elsevier, 1994. http://dx.doi.org/10.1016/b978-0-444-81994-9.50025-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Reentrant Cavity"

Mineo, Mauro, and Claudio Paoloni. "Micro reentrant cavity for 100 GHz klystron." In 2012 IEEE Thirteenth International Vacuum Electronics Conference (IVEC). IEEE, 2012. http://dx.doi.org/10.1109/ivec.2012.6262076.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ishihara, Yasutoshi, Yuichiro Endo, Hiroshi Ohwada, and Naoki Wadamori. "Noninvasive Thermometry in a Reentrant Resonant Cavity Applicator." In 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 2007. http://dx.doi.org/10.1109/iembs.2007.4352582.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dietl, Jochen, and Peter Stephan. "Numerical Simulation of Boiling from a Single Reentrant-Cavity." In The 15th International Heat Transfer Conference. Connecticut: Begellhouse, 2014. http://dx.doi.org/10.1615/ihtc15.pbl.008590.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tseng, Fan-Hsin, and Shih-Kun Liu. "Simulation of multi-reentrant two-mirror ring cavity lasers." In Photonics Asia 2007, edited by Yongtian Wang, Theo T. Tschudi, Jannick P. Rolland, and Kimio Tatsuno. SPIE, 2007. http://dx.doi.org/10.1117/12.774403.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xu, Che, Claudio Paoloni, and Lin Meng. "Preliminary Design of Reentrant Square Cavity for EIK Application." In 2021 14th UK-Europe-China Workshop on Millimetre-Waves and Terahertz Technologies (UCMMT). IEEE, 2021. http://dx.doi.org/10.1109/ucmmt53364.2021.9569918.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sato, Keiichi, Youhei Wada, Yoshitaka Noto, and Yasuhiro Sugimoto. "Reentrant Motion in Cloud Cavitation due to Cloud Collapse and Pressure Wave Propagation." In ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30350.

Повний текст джерела

Анотація:

It is well known that reentrant jet motion in periodic cloud cavitation means upward flow from the cavity closure area of cloud cavitation. However the mechanism of reentrant motion seems to remain unsolved clearly. In the present study some experiments were conducted about the mechanism of reentrant motion in a fixed type cavity for a convergent-divergent nozzle. High speed video observation and image analysis based on the frame difference method were made about unsteady cloud cavitation with a periodic structure of cavitation cloud shedding. As a result, the main points are experimentally found as follows; 1) a typical pattern of reentrant motions can be caused by the pressure wave propagation from the collapse of cavitation cloud shed downstream and 2) the frame difference method is very useful in an image analysis for high speed video observation of cavitating flow because the trajectory of pressure waves can be clearly visualized by the method.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hemawan, K. W., T. A. Grotjohn, and J. Asmussen. "A compact microwave reentrant cavity applicator for plasma-assisted combustion." In 2009 IEEE 36th International Conference on Plasma Science (ICOPS). IEEE, 2009. http://dx.doi.org/10.1109/plasma.2009.5227767.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kumar, Shalendra, Anuj Jain, Satish C. Gupta, and Bikash Mohanty. "BOILING HEAT TRANSFER FROM A VERTICAL ROW OF HORIZONTAL REENTRANT CAVITY TUBES." In Thermal Sciences 2000. Proceedings of the International Thermal Science Seminar Bled. Connecticut: Begellhouse, 2000. http://dx.doi.org/10.1615/ichmt.2000.thersieprocvol2thersieprocvol1.590.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dovgan, A. A., and V. V. Komarov. "Dominant mode eigen wavelengths of the reentrant cavity resonator with inhomogeneous dielectric filling." In 2012 International Conference on Actual Problems of Electron Devices Engineering (APEDE). IEEE, 2012. http://dx.doi.org/10.1109/apede.2012.6478034.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yue, Lingna, Jianbin Huang, Gangxiong Wu, Yanyu Wei, Wenxiang Wang, and Yubin Gong. "Reentrant double-staggered ladder coupled-cavity structure for X-band traveling-wave tube." In 2017 Eighteenth International Vacuum Electronics Conference (IVEC). IEEE, 2017. http://dx.doi.org/10.1109/ivec.2017.8289601.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Reentrant Cavity"

Riddle, Bill, and James Baker-Jarvis. Dielectric measurements using a reentrant cavity :. Gaithersburg, MD: National Bureau of Standards, 1996. http://dx.doi.org/10.6028/nist.tn.1384.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., and Lingnan Lin. Effect of IF-WS2 nanolubricant on R134a boiling on a reentrant cavity surface:. Gaithersburg, MD: National Institute of Standards and Technology, February 2019. http://dx.doi.org/10.6028/nist.tn.2033.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., and Lingnan Lin. Pool boiling of HFO-1336mzz(Z) on a reentrant cavity surface; extensive measurement and analysis. Gaithersburg, MD: National Institute of Standards and Technology, October 2018. http://dx.doi.org/10.6028/nist.tn.2022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., Lingnan Lin, and Donggyu Kang. Pool boiling of low-GWP replacements for R134a on a reentrant cavity surface; extensive measurement and analysis. Gaithersburg, MD: National Institute of Standards and Technology, October 2017. http://dx.doi.org/10.6028/nist.tn.1968.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., and Lingnan Lin. Pool Boiling of R515A, R1234ze(E) and R1233zd(E) on a Reentrant Cavity Surface; Extensive Measurement and Analysis. Gaithersburg, MD: National Institute of Standards and Technology, September 2019. http://dx.doi.org/10.6028/nist.tn.2063.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., and Lingnan Lin. Pool Boiling of R514A, R1224yd(Z), and R1336mzz(E) on a Reentrant Cavity Surface; Extensive Measurement and Analysis. National Institute of Standards and Technology, December 2020. http://dx.doi.org/10.6028/nist.tn.2125.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A. Effect of Concentration on R134a/Al2O3 Nanolubricant Mixture Boiling on a Reentrant Cavity Surface with Extensive Measurement and Analysis Details. National Institute of Standards and Technology, September 2013. http://dx.doi.org/10.6028/nist.tn.1813.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kedzierski, Mark A., and Steven E. Fick. Effect of Acoustic Excitation on R134a/Al2O3 Nanolubricant Mixture Boiling on a Reentrant Cavity Surface with Extensive Measurement and Analysis Details. National Institute of Standards and Technology, August 2014. http://dx.doi.org/10.6028/nist.tn.1836.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!