Добірка наукової літератури з теми "Recrystallization kinetics"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Recrystallization kinetics".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Recrystallization kinetics"
Kaverinsky, V. V., and Z. P. Sukhenko. "Mathematical Modelling of Primary Recrystallization Kinetics and Precipitation of Carbonitride Particles in Steels. II. Recrystallization Kinetics." METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 43, no. 2 (April 23, 2021): 235–44. http://dx.doi.org/10.15407/mfint.43.02.0235.
Повний текст джерелаErukhimovitch, V., and J. Baram. "Modeling recrystallization kinetics." Materials Science and Engineering: A 214, no. 1-2 (August 1996): 78–83. http://dx.doi.org/10.1016/0921-5093(96)10223-9.
Повний текст джерелаKraft, F. F., R. N. Wright, and M. K. Jensen. "Kinetics of nonisothermal recrystallization." Journal of Materials Engineering and Performance 5, no. 2 (April 1996): 213–19. http://dx.doi.org/10.1007/bf02650889.
Повний текст джерелаBracke, Lieven, Kim Verbeken, Leo Kestens, and Jan Penning. "Recrystallization Behaviour of an Austenitic High Mn Steel." Materials Science Forum 558-559 (October 2007): 137–42. http://dx.doi.org/10.4028/www.scientific.net/msf.558-559.137.
Повний текст джерелаHe, T., Y. D. Liu, Yan Wu, Q. W. Jiang, Gang Wang, Yan Dong Wang, and Liang Zuo. "Study on the Micro Mechanism of Recrystallization Texture Formation in Cold-Rolled IF Steel Sheet." Materials Science Forum 495-497 (September 2005): 417–22. http://dx.doi.org/10.4028/www.scientific.net/msf.495-497.417.
Повний текст джерелаChun, Y. B., S. Lee Semiatin, and Sun Keun Hwang. "Monte-Carlo Modeling of Recrystallization Kinetics of Cold-Rolled Titanium." Materials Science Forum 654-656 (June 2010): 1486–91. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.1486.
Повний текст джерелаXiong, Xue Gang. "Austenite Recrystallization Model of High Ti Microalloyed Steels." Advanced Materials Research 1014 (July 2014): 25–32. http://dx.doi.org/10.4028/www.scientific.net/amr.1014.25.
Повний текст джерелаRAOUGUI, Atae, Ion GRECU, Volkan Murat YILMAZ, and Kenan YILDIZ. "SOĞUK HADDELENMİŞ AA3105 VE AA5005 LEVHALARIN DSC ANALİZİ İLE YENİDEN KRİSTALLENME KİNETİĞİ." Euroasia Journal of Mathematics, Engineering, Natural & Medical Sciences 8, no. 17 (September 25, 2021): 80–85. http://dx.doi.org/10.38065/euroasiaorg.621.
Повний текст джерелаDutta, S., and M. S. Kaiser. "Recrystallization Kinetics in Aluminum Piston." Procedia Engineering 90 (2014): 188–92. http://dx.doi.org/10.1016/j.proeng.2014.11.835.
Повний текст джерелаWang, Jian, and Hong Xiao. "Determination of the Kinetics for Dynamic and Static Recrystallization by Using the Flow Curves." Materials Science Forum 575-578 (April 2008): 904–9. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.904.
Повний текст джерелаДисертації з теми "Recrystallization kinetics"
Simielli, Eider Alberto. "Deformation and recrystallization kinetics of microalloyed steels in the intercritical region." Thesis, McGill University, 1990. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=74539.
Повний текст джерелаDouble hit compression tests were performed on cylindrical specimens of the three steels at 820, 780 and 740$ sp circ$C within the $ alpha$ + $ gamma$ field. A softening curve was determined at each temperature using the offset method. It was observed that, in the base steel, $ alpha$ recrystallizes more slowly than $ gamma$. The addition of Mo steel retards the recrystallization of the base material; it has a greater influence on $ gamma$ than on $ alpha$ recrystallization. Nb addition has an even greater effect on the recrystallization of the two phases. In this steel, the recrystallization of ferrite was incomplete at the three intercritical temperatures. Furthermore, the austenite remained completely unrecrystallized up to the maximum time involved in the experiments (1 hr).
The progress of ferrite recrystallization was followed on quenched specimens of the three steels by means of quantitative metallography. Most of the data fit an Avrami equation with exponents in the range 2 to 2.5. A departure from this equation was observed for the final stages of the recrystallization process. Growth rate analysis showed that the average growth rate decreased with time for all the experimental materials, this decrease being greatest for the base steel and least for the Nb-containing grade. The nucleation of recrystallization was observed to occur heterogeneously in the microstructure. The interface between ferrite and austenite was the preferred site for nucleation. Measurement of the number and size of recrystallized ferrite grains showed that some grains begin to recrystallize very early, growing to a large size by the end of the process. The total number of grains increased continuously until almost 80% of the volume fraction was recrystallized. After that, due to coalescence, the number of recrystallized grains decreased very rapidly. (Abstract shortened by UMI.)
Bunkholt, Sindre. "Subgrain Growth, Recovery Kinetics and Nucleation of Recrystallization of Cold Deformed Aluminium Alloys." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23652.
Повний текст джерелаESPOSITO, IARA M. "Caracterização e cinética de recristalização da liga de alumínio 6063 após tratamentos termomecânicos." reponame:Repositório Institucional do IPEN, 2006. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11478.
Повний текст джерелаMade available in DSpace on 2014-10-09T14:00:50Z (GMT). No. of bitstreams: 0
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Dauda, Tamba Achiama. "Finite element modelling of hot rolling of Al-3%Mg and the kinetics of static recrystallisation." Thesis, University of Strathclyde, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.366886.
Повний текст джерелаIGNACIO, JULIANO da S. "Processamento e análise digital de imagens em estudos da cinética de recristalização de ligas Al-Mg-X." reponame:Repositório Institucional do IPEN, 2013. http://repositorio.ipen.br:8080/xmlui/handle/123456789/23301.
Повний текст джерелаMade available in DSpace on 2015-01-21T10:14:57Z (GMT). No. of bitstreams: 0
Dissertação (Mestrado em Tecnologia Nuclear)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Espósito, Iara Maria. "Caracterização e cinética de recristalização da liga de alumínio 6063 após tratamentos termomecânicos\"." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-14052012-105839/.
Повний текст джерелаThe aluminum 6063 alloy possesses a great industrial interest, presenting characteristics that justify its frequent use, when compared to the other aluminum alloys: the precipitation hardening and high cold work capacity. These alloys present high ductility, that allows their use in operations with high deformation degrees, as the cold work. The objective of this work is to show comparative analysis of the hardness Vickers of the commercial aluminum 6063 alloy, after cold work with different area reduction degree and thermal treatment. Considering the frequent utilization aluminium 6063 alloy, this work studies the caracterization and recristalization of this alloy, after the plastc deformation in different area reduction degrees, thermal treatment and convenient tratment times Termomechanic Tratments.
Abraham, Stephanie. "Development and Implementation of a Kinetic Quantitative Analysis of Novel Small Molecule Ice Recrystallization Inhibitors." Thesis, Université d'Ottawa / University of Ottawa, 2015. http://hdl.handle.net/10393/33189.
Повний текст джерелаMathevon, Alexandre. "Characterization and modelling of microstructural evolutions and mechanical properties during the thermal treatments of Dual-Phase steels." Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI120.
Повний текст джерелаThe aim of this thesis was to contribute to the development and understanding of the physical phenomena driving the microstructural evolutions and the mechanical properties of Dual-Phase steels. In a concern of use on industrial production lines, the development of physics-based mean-field numerical tools was retained, usable for a wide range of chemical composition and thermal cycle parameters. A calibration of the models on ternary steels from laboratory castings was carried out before their validation on two industrial grades. A model for predicting recrystallization kinetics (MiReX) was developed based on the chemical composition, the reduction ratio by cold rolling and their predicted precipitation state using a coupling with a software for predicting precipitation kinetics (Preciso). A model for the phase transformation between ferrite and austenite, based on the minimization of the global system energy (GEM), has been proposed for isothermal and anisothermal treatments. It reproduces the kinetics of austenite formation on an industrial thermal cycle including a heating ramp and holding for quaternary systems taking into account the dissolution of the cementite. A model for predicting the temperature of the beginning of martensitic transformation has also been developed for two-phase steels, taking into account austenitic grain size and carbon and manganese enrichment at the interface. Finally, a new interaction law based on observations during an ex-situ tensile test has allowed the improvement of a prediction model of the mechanical properties of DP steels. A consideration of the tempering step of martensite on the mechanical properties of DP steels has been proposed after the analysis of metallurgical mechanisms involved in tempering bythermoelectric power and hardness measurements
Cabrera-Anaya, Juan Manuel. "Growth of zinc whiskers." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENI039/document.
Повний текст джерелаWhiskers, conductive metallic filaments that grow from metallic surfaces, are a very importantissue for reliability of electronic components. Through recent years, there has been a renewedindustrial interest on whisker growth, mainly due to the miniaturization of electronic devices andthe environmental regulations forbidding the use of lead.While most of the research has been focused on tin whiskers, there is still little reference tozinc whiskers. Electroplated zinc coatings are actually used as anticorrosive protection for lowalloy steels in diverse industries such as automotive, aerospace or energy, as well as for supportstructures or raised-floor tiles in computer data centers. In order to mitigate, prevent and predictthe failures caused by the zinc whiskers, the mechanisms of growth must be understood.By accelerated storage tests and Scanning Electron Microscopy (SEM) observation, kinetics ofgrowth of zinc whiskers was studied on low alloy chromed electroplated carbon steel.Quantitative characterization of both whisker and hillocks (density, volume and growth rate) wasrelated with the parameters temperature, electroplating electrolyte, presence of chrome, steelsubstrate thickness, zinc coating thickness and residual stress, in order to understand themechanisms of growth.Additionally, both microstructure and crystallography of zinc coating, whisker roots and actualwhiskers were studied by Electron Backscatter Diffraction (EBSD), Transmission ElectronMicroscopy (TEM), Energy-dispersive X-ray spectroscopy (EDX) and local grain orientationwith ASTAR setup, using Focused Ion Beam (FIB) for samples preparation. Recrystallization aswell as dislocations were observed in both whiskers and hillocks; no intermetallic compoundswere seen in neither electroplated nor whiskers.It is found that compressive residual stress relaxation and whiskers growth are two differentbut strongly interconnected phenomena both thermally activated, an each of them follows adifferent mechanism; apparent activation energies of the two phenomena are calculated, andgrain boundary diffusion is established as the main diffusion mechanism for whiskers growth.Whiskers growth kinetics, both analytical and phenomenological is proposed. Goodestimation of whiskers growth and whiskers growth rate at temperatures close to operationconditions is obtained when compared with experimental data
Whiskers, filamentos metálicos que crecen en superficies metálicas, son un problema muyimportante para la fiabilidad de componentes electrónicos. Durante los últimos años, ha habidoun renovado interés industrial en el crecimiento de whiskers, debido principalmente a laminiaturización de dispositivos electrónicos y a las regulaciones ambientales que prohíben lautilización de plomo.La mayoría de las investigaciones se concentran en los whiskers de estaño y hay todavía pocostrabajos sobre los whiskers de zinc. Los recubrimientos de zinc electrodepositado son utilizadoscomo protección anticorrosión para los aceros de baja aleación en diversas industrias, comoautomotriz, aeronáutica o energética, así como en la estructuras de soporte o tejas de techosfalsos en los centros de datos informáticos. Para atenuar, prevenir y predecir las fallas causadaspor los whiskers de zinc, los mecanismos de crecimiento deben ser comprendidos.Gracias a experimentos de almacenamiento de muestras y a observaciones por microscopíaelectrónica de barrido (SEM), la cinética de crecimiento de whiskers de zinc ha sido estudiada enaceros de baja aleación recubiertos de zinc y cromados. Para comprender los mecanismos decrecimiento de whiskers de zinc, la caracterización cuantitativa de whiskers y de protuberancias(densidad, volumen y velocidad de crecimiento) fue relacionada con los parámetros siguientes:temperatura, electrolito usado en la electrodeposición de zinc, cromado, espesor del substrato deacero, espesor del recubrimiento de zinc al igual que el estrés residual.Adicionalmente, microestructura y cristalografía del recubrimiento de zinc, de raíces dewhiskers así como de los propios whiskers fueron estudiadas por medio de la difracción deelectrones por retrodispersión (EBSD), microscopía electrónica de transmisión (TEM),microanálisis por rayos X (EDX) y el dispositivo ASTAR para la orientación local de granos; lapreparación de muestras fue realizada con la ayuda de un haz de iones localizados (FIB). Larecristalización así como las dislocaciones en whiskers y protuberancias fueron observadas;ningún compuesto intermetálico ha sido observado en los recubrimientos ni en los whiskers.Se determinó que la relajación del estrés residual de compresión y el crecimiento de whiskersson dos fenómenos diferentes pero fuertemente interconectados y térmicamente activados. Cadauno de ellos sigue un mecanismo diferente; las energías de activación aparentes de los dosfenómenos han sido establecidas, y la difusión por bordes de grano es propuesta como elprincipal mecanismo de difusión para el crecimiento de whiskers.Cinéticas de crecimiento de whiskers, a la vez analíticas y fenomenológicas son propuestas.Una buena estimación del crecimiento de whiskers y su velocidad de crecimiento a temperaturascercanas a las condiciones de operación es obtenida por comparación con los datosexperimentales
Sarkar, Sujay. "Recovery and recrystallization kinetics of continuous and ingot cast AA5754." Thesis, 2003. http://hdl.handle.net/2429/14667.
Повний текст джерелаКниги з теми "Recrystallization kinetics"
Chen, Shangping. Recovery & Recrystallization Kinetics in Aa1050 & Aa3003 Aluminum Alloys. Delft Univ Pr, 2003.
Знайти повний текст джерелаЧастини книг з теми "Recrystallization kinetics"
Mungole, M. N., Prakash C. Trivedi, Satyam Sharma, and R. C. Sharma. "Recrystallization Kinetics in 17Cr 1Mo Ferritic Steel." In Defect and Diffusion Forum, 79–83. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-61-2.79.
Повний текст джерелаHartel, Richard W. "Mechanisms and kinetics of recrystallization in ice cream." In The Properties of Water in Foods ISOPOW 6, 287–319. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4613-0311-4_14.
Повний текст джерелаSuwa, Yoshihiro, Y. Saito, and Hidehiro Onodera. "Phase-Field Modeling of Recrystallization - Effects of Second-Phase Particles on the Recrystallization Kinetics." In Materials Science Forum, 1189–94. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.1189.
Повний текст джерелаMigschitz, M., and W. Pfeiler. "Short-Range Order Kinetics in α-AuFe after Deformation and Recrystallization." In Stability of Materials, 713–18. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0385-5_58.
Повний текст джерелаKundin, Julia. "Comparison of the Phase-Field Models to Predict the Recrystallization Kinetics." In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings, 377–85. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51493-2_35.
Повний текст джерелаZurob, Hatem S., G. Zhu, S. V. Subramanian, Gary R. Purdy, Christopher R. Hutchinson, and Yves Bréchet. "Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels." In Materials Science Forum, 123–30. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-981-4.123.
Повний текст джерелаLuo, Hai Wen, Lian Zi An, and Hong Wei Ni. "A New Approach to Model Heterogonous Recrystallization Kinetics Based on the Natural Inhomogeneity of Deformation." In Materials Science Forum, 1139–44. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.1139.
Повний текст джерелаJi, Mo, Vit Janik, Martin Strangwood, and Claire Davis. "Effect of Grain Size Distribution on Recrystallisation Kinetics in a Fe-30Ni Model Alloy." In Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), 153–58. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48770-0_22.
Повний текст джерелаJi, Mo, Vit Janik, Martin Strangwood, and Claire Davis. "Effect of Grain Size Distribution on Recrystallisation Kinetics in a Fe-30Ni Model Alloy." In Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), 153–58. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119328827.ch22.
Повний текст джерелаMcNamara, C. T., S. L. Kampe, P. G. Sanders, and D. J. Swenson. "The Effect of Cold Work on the Precipitation and Recrystallization Kinetics in Al-Sc-Zr Alloys." In Light Metals 2013, 379–82. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663189.ch66.
Повний текст джерелаТези доповідей конференцій з теми "Recrystallization kinetics"
Rokon, S. M. N., M. S. Kaiser, and K. M. Shorowordi. "Fractional recrystallization kinetics in non-heat-treatable aluminium alloys." In Proceedings of the 13th International Conference on Mechanical Engineering (ICME2019). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0037948.
Повний текст джерелаWaryoba, D. R., and P. N. Kalu. "Quantification of Recrystallization Kinetics in Heavily Drawn OFHC Copper Wires by Microhardness Technique." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42251.
Повний текст джерелаJian Wang and Hong Xiao. "Using Optimization Method to Determine the Dynamic Recrystallization Kinetics of Q235." In 2008 International Symposium on Information Science and Engineering (ISISE). IEEE, 2008. http://dx.doi.org/10.1109/isise.2008.152.
Повний текст джерелаTripathy, Haraprasanna, Arun Kumar Rai, Raj Narayan Hajra, Subramanian Raju, and Saroja Saibaba. "Modelling the role of nucleation on recrystallization kinetics: A cellular automata approach." In DAE SOLID STATE PHYSICS SYMPOSIUM 2015. Author(s), 2016. http://dx.doi.org/10.1063/1.4947614.
Повний текст джерелаYanushkevich, Z., A. Belyakov, C. Haase, D. A. Molodov, and R. Kaibyshev. "Recrystallization kinetics and texture evolution during annealing of cold-rolled high-Mn steel." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2017 (AMHS’17). Author(s), 2017. http://dx.doi.org/10.1063/1.5013913.
Повний текст джерелаWu, Yujie, Qiang Yu, and Sven K. Esche. "Static Recrystallization Modeling With a Cellular Automata Algorithm." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82840.
Повний текст джерелаLuo, Min, Chun Xu, Bing Zhou, Yan-hui Guo, and Rong-bin Li. "Static Recrystallization Behavior of a Nitrogen Controlled Z2CN19-10 Austenitic Stainless Steel." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2746.
Повний текст джерелаKermouche, Guillaume. "MEASURING/MODELLING RECRYSTALLIZATION KINETICS OF TUNGSTEN-BASED PLASMA-FACING COMPONENTS IN THE FRAMEWORK OF THERMONUCLEAR FUSION APPLICATIONS." In 2nd (ICAIC) International Conference for Academia and Industry Co-operation & 2nd (IMMSEM) International Meeting in Materials Science and Engineering of Maranhão. São Luís, Maranhão: Even3, 2021. http://dx.doi.org/10.29327/2ndicaic2ndimmsem2020.427660.
Повний текст джерелаKawaguchi, Munemichi. "Phase-Field Model for Recrystallization of Impurities in Sodium Coolant." In 2021 28th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/icone28-65721.
Повний текст джерелаYu, Xinghua, Paul Crooker, Yanli Wang, and Zhili Feng. "High-Temperature Deformation Constitutive Law for Dissimilar Weld Residual Stress Modeling: Effect of Thermal Load on Strain Hardening." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45776.
Повний текст джерела