Статті в журналах: "RCC FRAME"

1

Amrapali Kasabe and Vaibhav Shelar. "Pushover analysis of building using soft story at different levels." World Journal of Advanced Engineering Technology and Sciences 9, no. 1 (June 30, 2023): 203–10. http://dx.doi.org/10.30574/wjaets.2023.9.1.0160.

Повний текст джерела

Анотація:

In India the enormous loss of life and property perceived in the last couple of decades, attributable to failure of structures instigated by earthquakes. Responsiveness is now being given to the assessment of the sufficiency of strength in framed RCC structures to resist solid ground motions. The seismic reaction of RCC building frame in terms of performance point and the earthquake forces on Reinforced building frame with the help of pushover analysis is carried out in this project. In this method of analysis a model of the building is exposed to a lateral load. Pushover analysis can afford a substantial insight into the weak links in seismic concert of a structure and we can know the weak zones in the structure. In this project effort has been made to investigate the effect of Shear Wall and Structural Wall on lateral displacement and Base Shear in RCC Frames. RCC Frames with G+13 are considered, one with soft storey and other with normal building in L- shape. The pushover analysis of the RCC building frame is carried out by structural analysis and design software ETABS.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Laxmi, P. S., and Dr D. K. Kulkarni. "Damage Recognition in RCC Building Frame." Bonfring International Journal of Man Machine Interface 4, Special Issue (July 30, 2016): 145–50. http://dx.doi.org/10.9756/bijmmi.8172.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Bore, Miss Sapana, and Prof R. M. Desai. "Wind Analysis of RCC Tube in Tube Structure." International Journal for Research in Applied Science and Engineering Technology 10, no. 11 (November 30, 2022): 1691–701. http://dx.doi.org/10.22214/ijraset.2022.47703.

Повний текст джерела

Анотація:

Abstract: Modern tall buildings have efficient structural systems, and utilize high-strength materials, resulting in reduced building height, and thus, become slenderer and more flexible with low damping. These flexible buildings are very sensitive to wind excitation and earthquake load causing discomfort to the building occupants. Therefore, in order to mitigate such an excitation and to improve the performance of tall buildings against wind loads and earthquake loads, the tube in tube structures and tube frame structures are the innovative and fresh concept in the tubular structures. Generally, tube in tube structures is formed by connecting peripheral frame tube and inner core tube so closely, it is not seen as a solid system but it acts like a solid surface. The total loads acting on the structures to be collectively shared between the inner and outer tubes. The tubed frames Structure are new concept for tall building. In tubed mega frames instead of one central tube several vertical tubes are carrying the lateral loads. a comparative study of tube in tube structures and tubed mega frame system with different building geometry has been done using ETABS software.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

M, Ramesh, and Dr Chidananda G. "A Study on Seismic Performance of Open Ground Storey RCC Frames Analyzed by Response Spectrum Method." International Journal for Research in Applied Science and Engineering Technology 10, no. 10 (October 31, 2022): 420–28. http://dx.doi.org/10.22214/ijraset.2022.47006.

Повний текст джерела

Анотація:

Abstract: In the present study, seismic performance of Open Ground Storey (OGS) RCC frames is investigated using ETABS software. Bare frame, OGS frames and frames with RCC walls at ground storey are considered and infill walls are modelled as equivalent diagonal strut as per IS 1893–Part 1 (2016) codal provisions and equation given by Paulay and Priestley (1992). Seismic parameters viz. storey displacement, drift ratio, stiffness, shear and overturning moments for the developed RCC models are obtained by response spectrum analysis as per IS 1893–Part 1 (2016) in seismic zone III.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Raju, Y. Kamala, G. V. V. Satyanarayana, and G. Arun Sai. "RCC Highrised Residential Buildings its Influence on Earthquake Loads." E3S Web of Conferences 184 (2020): 01107. http://dx.doi.org/10.1051/e3sconf/202018401107.

Повний текст джерела

Анотація:

The present decade, high rise multi-storey buildings are subjected to many external effects such as earthquake, wind loads, tidal loads, etc., in most cases high rise buildings have more vulnerable to earthquake and wind loads. Most of the reinforced concrete multi-storeyed frame buildings were heavily damaged and many of them completely collapsed during due earthquakes. RC frame buildings were severely damaged due to various deficiencies when proper codal provisions are not designed. A study is need to study the behaviour of the RC framed structure under earthquake load to reduce the damage caused by earthquake forces In this investigation a RC framed building of G+20 storeyed is considered in several seismic zones under different soils as per Indian Standard code IS 1893(part1):2016, using STAAD. Pro V8i as software tool. Finally evaluate the ultimate Base shear using Equivalent static method and Response spectrum method addressing under design forces.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Arastu, M., and K. Moin. "Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test." Journal of Applied Engineering Sciences 13, no. 1 (April 1, 2023): 23–26. http://dx.doi.org/10.2478/jaes-2023-0004.

Повний текст джерела

Анотація:

Abstract Recently, the reinforced cement concrete (RCC) frame has been one of the most commonly used structural systems for buildings in the high seismic region due to its inherent earthquake-resistant property. However, there is still a deficiency in understanding the RCC building structural system dynamic behaviour during significant earthquakes. A 1/4th scaled RCC framed building structure has been tested on the shake table in the present study. The response in terms of engineering parameters like natural time period, damping, story acceleration, and damage pattern have been reported. The 1940 EL-Centro (NS component) time history has been used for the study. The failure patterns were observed within the column-beam joints. The difference between the input signal and the output signal has been noted and found to be in good agreement with each other.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Kuddus, Mir Abdul, and Partha Pritom Dey. "Cost Analysis of RCC, Steel and Composite Multi-Storied Car Parking Subjected to High Wind Exposure in Bangladesh." Civil Engineering Journal 3, no. 2 (February 28, 2017): 95–104. http://dx.doi.org/10.28991/cej-2017-00000076.

Повний текст джерела

Анотація:

Steel-concrete composite constructions in Bangladesh are nowadays very popular owing to their advantages over conventional concrete and steel constructions. Concrete structures are massive and allot more seismic weight and less deflection whereas steel structures instruct more deflections and ductility to the structure, which is beneficial in resisting earthquake and wind forces. Composite construction combines the better properties of both steel and concrete along with lesser cost, speedy construction, fire protection etc. The objective of this study was to analysis and design ground floor plus 19 storied R.C.C, Steel and Composite (steel-concrete) multi-storied parking structure’s frame of same plan using ETABS 2013 software and compare their structural parameters with estimated cost for required material. All frames are designed for same gravity and dynamic loadings. The RCC deck-slab is used in steel and composite frame. Beam and column sections are made of RCC, steel or steel-concrete composite sections. The composite construction option provided about 25 % and 18% less cost when compared to RCC and steel structure, respectively. Comparative study concludes that the composite frames are best suited among all the three types of constructions in terms of material cost and benefit added with better structural behaviour.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

V, Indrani, Shubha D. K, and Lavina E. J. "Dynamic Analysis of Multistory RCC Building Frame with Flat Slab and Grid Slab." International Journal of Trend in Scientific Research and Development Volume-2, Issue-4 (June 30, 2018): 1143–48. http://dx.doi.org/10.31142/ijtsrd14269.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Verma, Pankaj Kumar. "Comparative Study Seismic Analysis of RCC, Steel & Steel-Concrete Composite Frame: A Review." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (August 31, 2021): 2369–72. http://dx.doi.org/10.22214/ijraset.2021.37665.

Повний текст джерела

Анотація:

Abstract: This study examines how composite structures are gaining popularity in developing countries. For medium and high levels in RCC buildings are no longer economical due to increased weight, range limitations and low natural frequencies and dangerous formwork. Steel and concrete composite structures are becoming increasingly popular today and are safe throughout their useful lives. Round Steel and concrete structures are the best solution for modern buildings. In this article we will discuss the various results of building construction for RCC, metal and composite construction taking into account different studies. Keyword: RCC Structure, Steel Structure, Composite Structure, Joint Displacement, Base Shear

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Sanjay, Phatale Swarup. "Seismic Analysis of RCC, Steel and Steel Concrete Composite Frame." International Journal for Research in Applied Science and Engineering Technology 7, no. 7 (July 31, 2019): 249–55. http://dx.doi.org/10.22214/ijraset.2019.7037.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Syed, Zubair I., Osama A. Mohamed, Kumail Murad, and Manish Kewalramani. "Performance of Earthquake-resistant RCC Frame Structures under Blast Explosions." Procedia Engineering 180 (2017): 82–90. http://dx.doi.org/10.1016/j.proeng.2017.04.167.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Sutar, S. R., and P. M. Kulkarni. "Comparative inelastic analysis of RCC and steel-concrete composite frame." IOSR Journal of Mechanical and Civil Engineering 13, no. 04 (April 2016): 22–32. http://dx.doi.org/10.9790/1684-1304042232.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Bhoyar, Mr Moreshwar K., and Prof Harshwardhan Rangari. "Review on Analysis of RCC beam, Column Joint and RCC Shear wall using FRP strengthening on Ansys Software." International Journal for Research in Applied Science and Engineering Technology 11, no. 3 (June 30, 2023): 3327–31. http://dx.doi.org/10.22214/ijraset.2023.54314.

Повний текст джерела

Анотація:

Abstract: After occurrence of recent earthquakes in the most of world parts, scientific committees for reducing natural disasters and research centers declared based performance design, investigation faults, retrofitting, rehabilitation, new researches are related to strengthening of structures, notice performance, importance of structure, surface of earthquake levels, considering economic and feasibility. One of streningthening method of RC frame is using FRP laminates. Beam and column where intersects is called as joint or junction. The different types of joints are classified as corner joint, exterior joint, interior jointetc. on beam column joint applying quasi-static loading on cantilever end of the beam. and study of various parameters as to be find out on corner and exteriorbeam column joint i.e. maximum stress, minimum stress, displacement and variation in stiffness of beam- column joint can be analyzed in Ansys software (FEM Software) RC shear walls are considered one of themain lateral resisting members in buildings. In recent years, FRP has been widely utilized in order to strengthen and retrofit concrete structures. Significant experimental research has been conducted over the past three decades on hysteretic behavior of beamcolumn joints of RC frames under cyclic displacement loading. The various research studies focused on corner and exterior beam column joints and their behavior, support conditions of beam-column joints. Some recent experimental studies, however, addressed beam-columnjoints of substandard RC frames with weak columns, poor anchorage of longitudinal beam bars and insufficient transverse reinforcement. the behavior ofexterior beam column joint is different than the corner beam column joint.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kadu, Amruta. "Seismic Analysis of RCC and Steel Building on Sloping Ground." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (July 20, 2021): 1753–62. http://dx.doi.org/10.22214/ijraset.2021.36732.

Повний текст джерела

Анотація:

It is necessary to design and analyse a structure to perform well under seismic loads and also endow with well strength, stability and ductility for seismic design. The seismic performance of high rise steel frame and RCC frame structure is analysed by equivalent static method. The advancement in building, Information, modelling has integrated design, detailing, and fabrication of steel which will result in high performance under earthquake loading. In present work various models were analysed with the help of Staad pro. And the results so obtained were plotted and compared.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Shrirame, Sharad, Prof Sanjay Dhenge, and Prof Girish Sawai. "Comparative Analysis of Lateral Loads Resisting System for RCC Structure." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (May 31, 2022): 2267–73. http://dx.doi.org/10.22214/ijraset.2022.42719.

Повний текст джерела

Анотація:

Abstract: This research work focuses on comparison of seismic analysis of G+12 story buildings stiffened with shear wall at various locations. The performance of the building is analysed in Zone II, for Mumbai city. This research paper includes understanding the main zone factor that tends the structure to perform poorly during lateral moments caused by earthquake in order to achieve their appropriate behaviour under future earthquakes. The analysed structure is symmetrical, G+12, Ordinary RC moment-resting frame (OMRF). Modelling of the structure is done by using staad proV8i software. The Time period used for the seismic calculations of the structure in both the direction is achieved from the software and as per IS 1893(part I):2016 seismic analysis has conducted. The Lateral seismic forces of RC frame are carried out using equivalent static method as per IS 1893(part I): 2016. The purpose of present work is to understand that the structures need to have suitable Earthquake resisting features to safely resist large lateral forces exerted on structure during lateral movement of structure. Shear walls are efficient (model no.3), In terms of effectiveness in minimizing lateral movement and damage caused due to the earthquake in structure the conventional frame system also provides the resistance to structure but it is unable to minimise the damage caused by the earthquake in structure. A comparative analysis is done in terms of Base shear, Displacement, Axial load, Moments in Z direction in columns and maximum bending moments in beams. Keywords: Stadd-pro, seismic excitation ,ordinary RC frame structure

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Patkar, Aniket, and Santosh Mukkawar. "Break even analysis & response of longer span frames with or without post-tensioned beams in multipurpose hall." IOP Conference Series: Materials Science and Engineering 1197, no. 1 (November 1, 2021): 012011. http://dx.doi.org/10.1088/1757-899x/1197/1/012011.

Повний текст джерела

Анотація:

Abstract In this paper analyzed the RC a nd PT Beam against variation in the clear span length of the beam. This work includes the design and estimate of Cost/Beam from 5m span up to 15m span length of the beam. Also, The response of the frame following two variation in its modelling. Initially, The primary model consists of a conventional RCC frame with all beams and columns as RCC. The secondarily model considers peripheral beams as RCC and interior beams with PT. Such as ETABS software used to designed RC beam element and ADAPT-PTRC used to designed PT beam element. However it has been note that variation of cost with respect to the span of beam where the break-even point between RCC and PT technique is approx 7m Span. Also the control on deflection of beam by restrict the depth of beam by using unbonded Post-tensioned prestress concrete beam method. There is very good understand all aspects PT beam better than as compared with to RC beam in deflection against longer span length of beams. This paper gives suggestion about to reach a decidedly conclusion regarding which technique is superior over one another.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Rajkumar, K. C. "Experimental Investigation on Double Skin Composite Tubular Column." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 14, 2021): 755–63. http://dx.doi.org/10.22214/ijraset.2021.35079.

Повний текст джерела

Анотація:

RCC and steel frames have been the most common frame systems for long times whereas composite frame system has also emerged as popular system for high rise buildings for few decades. Multi-storey composite frames are generally composed of structural steel members made composite with concrete. The use of Double-Skin Tubular columns in building construction has seen renaissance in recent years due to their numerous advantages, apart from its superior structural performance making a typical composite frame structure. Fiber reinforced polymers (FRPs), a relatively new class of non-corrosive, high-strength, lightweight material, have over the past approximately 15 years emerged as practical materials for a number of structural engineering applications. FRP has become one of the most popular methods in the repair and rehabilitation of concrete infrastructure due to its ease of application and the special physical characteristics. This paper focus to determine the compressive strength of columns in different type of specimens under Axial load.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Srivastava, Sharad, and Ganesh Jaiswal. "Analysis of Multistorey RCC Frame subjected to Mainshock and Aftershock Earthquake." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 4700–4707. http://dx.doi.org/10.22214/ijraset.2022.46053.

Повний текст джерела

Анотація:

Abstract: Structure analysis and design are significantly influenced by earthquake. It is believed that seismic evaluation is required for the viability and serviceability of both present and future building structures. When a structure's base is subjected to a certain type of ground motion, a time history analysis is performed to examine the dynamic reaction of the structure at each time interval. The near-field earthquake ground motion verification may have specific impacts for both forward and backward directivity. The initial's velocity and displacement motions, respectively, exhibit pulse and fling-step characteristics. Therefore, it is crucial to assess how well structures built solely to withstand the primary shock would work through future aftershocks. Using modern seismic protection systems, such as base isolations or / and supplemental dampening devices, that significantly reduce building damages during main shocks and their related aftershocks is one of the appropriate solutions to this issue. Due to changes in both static and dynamic stress that take place during the earthquake process, aftershock events are set off by the primary shock. In order to better understand the ground motion features of a sizable collection of mainshock and subsequent aftershock ground motion data recorded in accelerograph stations around the region, this study reviews pertinent literature in the field. The G+9 RCC building will be used in this study to conduct a time history analysis of the mainshock and aftershock data of the Chamoli earthquake provided by the Centre for Engineering Strong Motion Research Ground Motion Database. For designing purposes, the IS 456-2000 code is taken into consideration. Live loads are measured in accordance with IS 875-part 1, and seismic zone IV is selected for analysis in accordance with IS 1893-2016. Storey drift, base shear, joint reactions, and storey displacement are just a few of the variables that can have an impact on how well a building performs. Since each of these variables has a significant impact on how a structure responds to seismic loads, they are also taken into account when evaluating the results.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Lade, Mangesh. "Compare of various Types of Zipper Braced Damper with RCC frame." International Journal for Research in Applied Science and Engineering Technology 7, no. 6 (June 30, 2019): 212–17. http://dx.doi.org/10.22214/ijraset.2019.6037.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

., Rakesh R. "MANNUAL AND SOFTWARE BASED NON LINEAR ANALYSIS OF RCC PORTAL FRAME." International Journal of Research in Engineering and Technology 05, no. 06 (June 25, 2016): 405–10. http://dx.doi.org/10.15623/ijret.2016.0506072.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

., Puneeth Sajjan. "STUDY ON THE EFFECT OF VISCOUS DAMPER FOR RCC FRAME STRUCTURE." International Journal of Research in Engineering and Technology 05, no. 09 (September 25, 2016): 31–36. http://dx.doi.org/10.15623/ijret.2016.0509005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Kene, Piyush. "A Comparative Study on Analysis of a Conventional Multi-Storey Building & a Monocolumn Building." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 3851–59. http://dx.doi.org/10.22214/ijraset.2021.35964.

Повний текст джерела

Анотація:

The comparative study on analysis of RCC Frame structure supported on a single column and multi-column is done in this project. Cost comparison , Ground space comparison is done between RCC single column and RCC multi column structure .This paper presents structural modelling, stress, bending moment, shear force and displacement, deflection design considerations for a structure and it is analysed using STAAD-Pro. Various steps involved in designing of RCC Frame structure supported on a single column and multi-column by using software are Geometric Modelling, providing material properties and sectional Properties, fixing supports and boundary Conditions, providing loads & load combinations, Special Commands, Analysis Specification , Design Command and Report. The influence of plan geometry has an important role in static analysis. Maximum values of stresses, bending moments, shear forces and displacements and deflection are presented. The acting loads considered in the present analysis were dead load, Live load, floor load, and wind load. The project is to planning & analysis by using software for a multi storied building and single column building of G+3, G+7, G+15 floors. The design is done by taking in to account the requirements and standards recommended by IS code and national building rules.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Srivastava, Sharad, and Dinesh Narain Srivastava. "Comparative Analysis of Multistorey RCC and Semi-Rigid Steel Frame with Cross Bracings Subjected to Mainshock and Aftershock Earthquake Sequence." IOP Conference Series: Materials Science and Engineering 1273, no. 1 (January 1, 2023): 012011. http://dx.doi.org/10.1088/1757-899x/1273/1/012011.

Повний текст джерела

Анотація:

Abstract Strong Ground Motions have a significant impact on structural analysis and design. Seismic evaluation is deemed necessary for the quality, reliability, and feasibility of existing and developing structures. Earthquakes are even more disastrous when a mainshock is succeeded and preceded by aftershocks of higher magnitude. Most of the time, these aftershocks are ignored during analysis. In the last few decades, steel buildings have been crucial to the construction sector. On the other hand, RCC frames are commonly designed structures for commercial purposes and cost-effectiveness. IS 1893 (Part:1)-2002 Criteria for Earthquake Resistant Design of Structures and IS 13920-2016 Ductile Detailing of RC Structures Subjected to Seismic Reactions are majorly used for Seismic Analysis. Steel bracings in the structural system increase the ductility and stiffness of the frame structure. That can be arranged in a variety of ways, such as X, diagonally, alternatively, V, inverted V, K, etc. Cross bracings are used in this paper for the design of a typical multi-story (G+9) semi-rigid steel frame and a typical RCC frame is designed of the same dimensions. Both the frames are modelled and compared using ETABS software and a static nonlinear Time History analysis is executed to examine the performance of both the frames under the Mainshock and Aftershock of Chamoli earthquake. The Mainshock and Aftershock results of the Chamoli earthquake are extracted from the Centre for Engineering Strong Motion Research Ground Motion Database. Base shear, joint displacement, kinetic energy, and story displacement are a few of the variables of Time History Analysis that affect how well a building performs during mainshock and aftershock earthquakes. When analysing the outcomes, it is important to take into account that each of these factors significantly affects how a building responds to seismic loads.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Wadde, Abhishek, and Dr Uttam Awari. "Wind Analysis of RCC Tube in Tube Structure Using ETABS Software." International Journal for Research in Applied Science and Engineering Technology 10, no. 12 (December 31, 2022): 2322–32. http://dx.doi.org/10.22214/ijraset.2022.48468.

Повний текст джерела

Анотація:

Abstract: The advancement in construction field is increased day by day. The numbers of buildings, height of building is increased. The effect of lateral load is increased with respect to the increase of height. Advance construction methods and structural systems are to be introduced to enhance the structural safety. There are different types of structural systems which are to be used to resist the effect of lateral loads on the buildings. tube, bundled tube, tube in tube, and tube mega frame structures tubular structures. A tube-in-tube structure Comprises of a peripheral framed tube and a core tube interconnected by floor slabs. The frame tube structure takes more of lateral load the efficiency of this system is derived from the great number of rigid joints acting along the periphery, creating a large tube. In which the horizontal slabs and beams connecting vertical elements are assumed as continuous connecting medium having Equivalent distributed stiffness properties. The tube-in-tube structure with central tube provides stability against lateral loading as well as gravity loading. The Static analysis is use for analysis of tubular structures and the output of the models are evaluate to have a comparative study of their wind performance in different terrain, Also, this system provides enough opening for stairways, elevators and ducts etc. It is suitable for high rise structure. The use of tube-in-tube structure allows speedy construction. It is suitable for RCC, constructions. This study is focused on wind behavior of tube in tube structure for varying terrain category in India for the parameters like wind displacement, story drift, and time period.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Maharjan, Rajib, and Vivek Shrestha. "Analysis of One Bay Residential Building with Combined RCC Frame and Load Bearing Wall Structures." Journal of the Institute of Engineering 13, no. 1 (June 22, 2018): 117–24. http://dx.doi.org/10.3126/jie.v13i1.20356.

Повний текст джерела

Анотація:

The major purpose of this study is to justify construction method of a hybrid structure in core area with construction complexity due unsafe excavation conditions and tries to define its rigidity and strength. Both RCC and Frame structure transfer same load to ground through foundation but the transfer mechanism varies. In some practical condition, building construction should be carried out in compact areas with unsafe adjoining building where adequate excavation for foundation cannot be carried out. In such cases, one bay hybrid structure is proposed for construction with combined RCC frame structure and load bearing walls. In these combined cases, both structures works as same unit to transfer building load but the transfer pattern varies. The variable load transfer pattern is due to discontinuity in structural system which also effect on seismic response of the building. The placement of a masonry load bearing structure in RCC frame structure varies design of all structural components of the building. To study actual behavior of hybrid structure in various load condition and introducing cost minimization techniques of buildings structural analysis was carried using ETABS 2016 with composite structural arrangement and with induction of load bearing wall as structural component. By which seismic behavior of building in both cases was obtained as well as reduction in rebar percentage and dimensional reduction of structural components can be achieved.Journal of the Institute of Engineering, 2017, 13(1): 117-124

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Goyal, Ankur M. "Rehabilitation of RCC Frame Building: Case Study of School Building AT Bhimora." International Journal for Research in Applied Science and Engineering Technology 6, no. 4 (April 30, 2018): 2283–89. http://dx.doi.org/10.22214/ijraset.2018.4390.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Sapate, Mr Vishal M., and Mr Nikhil S. Jadhav. "Comparative Study on Damage Index of RCC Frame Considering Fiber Discretization Technique." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 1420–27. http://dx.doi.org/10.22214/ijraset.2022.45492.

Повний текст джерела

Анотація:

Abstract: Damage indices which take into account both maximum deformation and cyclic effects were developed by Park and Ang. In the field of structural engineering, it’s observed that the Park and Ang damage index is mostly used for RCC structure. The damage index parameter assessed based on plastic hinge approach which is not effective to consider the coupled response between axial force and flexural moment especially in nonlinear domain. The accurate damage evaluations of structure are depending on other parameter such as, accurate modelling of frame, selection ground motion records. Masonry infill walls are widely used as partitions all over the world. Commonly masonry walls are not considered in the damage evaluation process because they are supposed to act as non-structural members or elements. Fiber discretization technique is used to consider inelastic behaviors of member. Single strut is model as infill wall in multidirectional. Results obtained from this study show that the accuracy of damage index totally depends on damage parameter consideration and modeling of building. The coupled effects give more realistic damage of structure as compared with other damage parameters.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Kasat, Pankaj. "Analysis of RCC Frame Structure with Change in Location of Floating Columns." International Journal for Research in Applied Science and Engineering Technology 10, no. 9 (September 30, 2022): 475–79. http://dx.doi.org/10.22214/ijraset.2022.46656.

Повний текст джерела

Анотація:

Abstract: The objective of present study is to analyze and compare the change in location of floating column in R.C.C frame structure. The comparison of both structures is studied by calculating, finding and tabulating comparative values of displacement. The study reflects that with change in structure i.e. the behavior of structure towards earthquake changes, nodal displacement, moment, and base shear values shows drastic changes towards resistivity against seismic forces. The soft computing tool and commercial software STAAD-Pro is used for modeling and analysis also the study done over here thus helps to understand effect of earthquake on structures for achieving stable and safe structure.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Sathiaseelan, P., and S. Arulselvan. "Seismic Behavior of 4-storey Ferro-cement Retrofitted R.C Frame with RCC Strips in the Brick Infill Panel." Asian Journal of Research in Social Sciences and Humanities 6, no. 11 (2016): 390. http://dx.doi.org/10.5958/2249-7315.2016.01200.4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Laddha, Vrunda R., Sharda P. Siddh, and Prashant D. Hiwas. "Analytical Investigation of Composite Structure in Comparison of RCC Structure." IOP Conference Series: Materials Science and Engineering 1197, no. 1 (November 1, 2021): 012069. http://dx.doi.org/10.1088/1757-899x/1197/1/012069.

Повний текст джерела

Анотація:

Abstract High rise structures becoming very common everywhere due to scarcity of land and increasing population. Though we have RCC structure system as high-rise buildings, but in RCC buildings due to bulky size of the components of the structure self-weight will be more due to the heavy density of materials. By observing the difficulties and challenges in the field of high-rise structures engineers are using efficient structural system that is Steel Concrete Composite Structure. Composite structure consists composite deck slab, composite beam and composite column. Composite Structure complies of Concrete which is good in compression and structural steel which good in tension and composition of these material makes structure better in ductility which comparatively on higher side than RCC structure. Here G+7 high rise structure is considered for analysis by ETABS software. This paper involves Analysis of Commercial building by Equivalent static method on Composite structure and RCC structure with same plan of building and same design data. The structure is in earthquake zone III and wind speed 44m/s. Analytical comparisons of both Composite and RCC frame based on structural parameters are made with help of graphs and tables. By comparing the results, we found that Steel-Concrete Composite Structures are more desirable than RCC structures.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Arastu, Mohammad, and Professor Khalid Moin. "Seismic Study of Precast Steel-Reinforced Concrete Building using Shake Table Test." International Journal of Innovative Technology and Exploring Engineering 12, no. 7 (June 30, 2023): 1–7. http://dx.doi.org/10.35940/ijitee.g9575.0612723.

Повний текст джерела

Анотація:

Precast Steel-Reinforced Concrete (PSRC) structural frame systems for moment-resisting, comprised of Prefabricated Steel (S) girders and Precast Reinforced Cement Concrete (RCC) columns. This structural system has the advantage of inherent stiffness and damping during a seismic event. PSRC’s moment-resisting frame system is also known for its construction efficiency, lightweight, and low cost. Earlier investigations have shown PSRC systems helpful in designing and constructing buildings while maintaining ample strength and high ductility during seismic incidents. Despite much previous research, the use of the PSRC structural system in India is still limited. Previous studies have accepted a vital need to test comprehensive structural systems, both experimentally and analytically - to validate the knowledge collected to date and act as evidence of concept for the PSRC moment-resisting frame system. This paper aims to facilitate more recognition and use of the PSRC structural system as a feasible choice for traditional RCC lateral resisting systems. A shake-table test was conducted to evaluate the PSRC building performance during maximum considered earthquake events. The comparative study of experimental and numerical results of the 1/4th scaled building is presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Bhunia, Dipendu, Vipul Prakash, and Ashok D. Pandey. "A Conceptual Design Approach of Coupled Shear Walls." ISRN Civil Engineering 2013 (October 9, 2013): 1–28. http://dx.doi.org/10.1155/2013/161502.

Повний текст джерела

Анотація:

Earthquake causes considerable damage to a large number of RCC high-rise buildings and tremendous loss of life. Therefore, designers and structural engineers should ensure to offer adequate earthquake resistant provisions with regard to planning, design, and detailing in high-rise buildings to withstand the effect of an earthquake and minimize disaster. As an earthquake resistant system, the use of coupled shear walls is one of the potential options in comparison with moment resistant frame (MRF) and shear wall frame combination systems in RCC high-rise buildings. Furthermore, it is reasonably well established that it is uneconomical to design a structure considering its linear behavior during earthquake. Hence, an alternative design philosophy needs to be evolved in the Indian context to consider the postyield behavior wherein the damage state is evaluated through deformation considerations. In the present context, therefore, performance-based seismic design (PBSD) has been considered to offer significantly improved solutions as compared to the conventional design based on linear response spectrum analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Govindarajan, Ameish, Apurva M. Hegde, Neal Shiv Chawla, Nazli Dizman, Zeynep Busra Zengin, Luis A. Meza, Ramya Muddasani, et al. "Characterization of aberrant alternative splicing landscape in patients with renal cell carcinoma (RCC)." Journal of Clinical Oncology 40, no. 6_suppl (February 20, 2022): 386. http://dx.doi.org/10.1200/jco.2022.40.6_suppl.386.

Повний текст джерела

Анотація:

386 Background: Aberrant alternative splicing (AS) events have been implicated in the initiation and progression of various cancers; however, the detailed nature of their role in RCC is yet to be fully elucidated. Our study aims to characterize AS events in RCC tumors using a novel AS pipeline (Bisbee). Methods: We retrospectively identified patients (pts) with RCC who had tumor-normal whole exome sequencing and tumor whole transcriptome sequencing (GEMExtra, Ashion Analytics) performed as part of their routine clinical care. AS events from RNA sequencing data were identified and further characterized as (1) alternative splice 3’ site (A3), (2) alternative splice 5’ site (A5), (3) exon skipping (ES), (4) intron retention (IR), and (5) mutually exclusive exons splice events (MUT). The Bisbee outlier analysis was performed against normal kidney tissues from the GTEx tissue library to further identify tumor-associated splice events. Outlier splice events were categorized as either non-coding/protein loss/silent, isoform switch, novel, or unknown. Results: Overall, 147 RCC pts (77% male) with RNA sequencing data were included in this analysis. Median age at diagnosis was 60 (range 31-94) and 97% of pts had metastatic RCC. The distribution of histology was 85% clear cell RCC followed by 11% papillary RCC. The AS analysis identified 25,928 outlier splice events. Approximately 60% of these were predicted to be protein-coding events, with the majority arising from IR and ES. These were followed by A3, A5, and MUT, in descending order of frequency. We also examined tumor-associated novel outlier events where 70% of analyzed RCC tumor samples noted 34 tumor-associated novel events were present, shared in most of the cohort and found an enrichment for IR events leading to frame disruptions. Data of splice variants will be presented at the meeting. Conclusions: In depth examination of this large cohort suggests that IR resulting from AS events occur frequently within RCC. Further efforts to investigate the association of AS events and clinical outcomes are underway.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Bajpai, Shobhit. "Earthquake Resistance Performance of a Multistorey RCC Frame Considering Two Different Positions of the Staircase." International Journal for Research in Applied Science and Engineering Technology 10, no. 9 (September 30, 2022): 1252–59. http://dx.doi.org/10.22214/ijraset.2022.46806.

Повний текст джерела

Анотація:

Abstract: The stairs have significant influence on the seismic lateral stiffness, vibration mode and internal force of frame beam column of the reinforced concrete frame structure. In this paper, 3 analysis models have been made by E-TABS. In these models, relevant analysis has been made about the influence of stairs in 10-storey building while it has no staircase, it is near the middle of the building and while it is near the corner of the building. Results from linear analysis show that in concrete structure, it is essential to consider the modelling of staircase as it causes additional stiffness and change in coordinate of center of rigidity. These effects can be evaluated in period, stiffness, base shear, lateral load and displacement of the structure.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

., Vikram Y. Tambvekar. "IMPORTANCE OF CONCRETE IN RCC FRAME STRUCTURE FOR HIGH RISE BUILDINGS AND IMPORTANT INFRASTRUCTURES." International Journal of Research in Engineering and Technology 05, no. 32 (November 25, 2016): 34–38. http://dx.doi.org/10.15623/ijret.2016.0532005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Singh, Anamika, Rajeev Singh Parihar, Abhay Kumar Jha, Barun Kumar, and Rajesh Misra. "Seismic Analysis for Zone III, IV, V of (G+14) Multistorey Building with Bracings System Using Staad Pro Software." International Journal for Research in Applied Science and Engineering Technology 10, no. 12 (December 31, 2022): 1968–72. http://dx.doi.org/10.22214/ijraset.2022.48391.

Повний текст джерела

Анотація:

Abstract: This present study focuses G +14 Simple Building model In STAAD PRO software. With beam size 300 X 400 mm and column size 400 X 500 mm this reinforced concrete building having M30 grade of Concrete and Fe415 high density steel. To study the response of building with and without bracing system. The performance of the building is analyzed in Zone III, Zone IV, Zone V. Metallic braces is the easiest of simplest way of reducing response of building which gave rise to nine models for the analysis.Model1 in -BFB- Bare frame RCC Building.Model2 in -BX1-Framed building with Bracing at the exterior side along X-direction.Model3 in -BY2- Framed building with Bracing at the exterior side along Y-direction.Model4 in -BXY3- Framed building with Bracing at the exterior side along X and Y-direction.Model5 in-BEC4- Framed building with Bracing at the exterior side around the corners. This system of bracing is used because eccentric bracing systems consist of a link element that undergoes inelastic deformation for energy dissipation. This link is possibly beam element of frame structure which is more suitable for steel structures and not for reinforced concrete structures and a shear wall is a structural panel that can withstand the impact of lateral forces on it. Lateral forces are those parallel to the wall plane and are usually wind loads and seismic loads. This building has been modeled as 3D Space frame model with six degree of freedom at each node using STAAD PRO. software for stimulation of behavior under gravity and seismic loading.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Hemamathi, A., Binu Sukumar, and R. B. Hambrish Guru Chantrakant. "Numerical Analysis of RCC Beam Using ABAQUS." IOP Conference Series: Earth and Environmental Science 1084, no. 1 (October 1, 2022): 012077. http://dx.doi.org/10.1088/1755-1315/1084/1/012077.

Повний текст джерела

Анотація:

Abstract Experimental investigation of RCC beam provide an important understanding on its flexural properties. The stages involved from the design to casting, curing, testing and interpretation of results is time consuming and involves economy and labour. To reduce the above said challenges, numerical investigation seems to be an alternate without involvement of money and labour. Preliminary design stages involves design equation which are provided by the basic experiments conducted and they also give the basic information to develop the finite element model. This paper presents the numerical investigation of RCC beam to study the flexural properties using an effective finite element analysis tool ABAQUS. RCC beam prototypes were casted and their flexural properties were experimentally investigated. The results were validated through the finite element model by providing suitable properties for the material that are actually used for the prototype with the desired loading and support conditions. Beam of size 3000 x 230 x 300 mm of M20 grade concrete was casted and tested in the loading frame for flexure and deflection. The study focussed for under reinforced, balanced and over reinforced sections. Numerical analysis was performed using ABAQUS for model geometry and the results were compared with the experimental results. The results agreed with both the experimental and numerical values. Numerical results helps in developing reliable models which can reduce the number of required test specimens for conducting experiments and the model can be used for various study. Also from the finite element results the propagation of cracks can be well understood for the actual specimen.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Swarnkar, Jagriti. "Examining Seismic Response for Rigid Building Frame Having Composite Column." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 3647–53. http://dx.doi.org/10.22214/ijraset.2022.45821.

Повний текст джерела

Анотація:

Abstract: Concrete filled steel tubes are generally used in Beams, Columns, Piers and caissons for deep foundations. The steel tube functions as the formwork for casting the concrete and hence, construction cost is reduced. The prime focus of the present work is to study the behavior of RCC structure under the effect of seismic loads provided with composite columns. This research study comprises of seismic analysis with the design of rigid frame with Reinforced Concrete column, Concrete encased steel and steel tube encasing concrete columns. These cases are designed based on IS 1893:2016 using ETABS software. The result shows that steel encased concrete is performing better than conventional column. The construction practices is the only difficulty arises in such of composite column.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Muscalu, Marius Teodor, Andrei Radu, Mihai Budescu, Nicolae Ţăranu, and Eugen Florescu. "Use of Recycled Materials in the Construction of Roller Compacted Concrete (RCC) Pavements." Advanced Materials Research 649 (January 2013): 262–65. http://dx.doi.org/10.4028/www.scientific.net/amr.649.262.

Повний текст джерела

Анотація:

This paper presents the results of laboratory studies, undertaken by the authors, in the frame of 4D-POSTDOC research program :"Innovative technologies and logistical solutions for the reuse of demolition and construction waste in the construction of cement concrete and fiber reinforced cement concrete pavements". After the presentation of the main objectives of this research program, and of the specific characteristics of the demolition wastes investigated in parallel with those of conventional construction materials, the possibility of using these materials for the preparation of the roller compacted concrete (RCC) is investigated. Finally, conclusions on the influence of recycled aggregates and recycled steel fibers on the mechanical performances of RCC and technical recommendations for the use of this more efficient material and of the involved technology for the construction of sustainable road infrastructures are formulated.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Lavacchi, Daniele, Elisa Pellegrini, Valeria Emma Palmieri, Laura Doni, Marinella Micol Mela, Fabrizio Di Maida, Amedeo Amedei, Serena Pillozzi, Marco Carini, and Lorenzo Antonuzzo. "Immune Checkpoint Inhibitors in the Treatment of Renal Cancer: Current State and Future Perspective." International Journal of Molecular Sciences 21, no. 13 (June 30, 2020): 4691. http://dx.doi.org/10.3390/ijms21134691.

Повний текст джерела

Анотація:

Systemic treatment of renal cancer (RCC) has undergone remarkable changes over the past 20 years with the introduction of immunotherapeutic agents targeting programmed cell death (PD-1)/programmed death-ligand 1 (PD-L1) axis, as a single-agent or combined with anti-CTLA-4 monoclonal antibodies (MoAbs) or a multi-target vascular endothelial growth factor-(VEGF) tyrosine kinase inhibitor (TKI). In this paper, we review the main evidence on the use of Immune Checkpoint Inhibitors (ICIs) for RCC treatment from the first demonstration of activity of a nivolumab single agent in a phase I trial to the novel combination strategies (anti-PD-1 plus anti-CTLA4 or anti-PD-1 plus TKI). In addition, we discuss the use of anti-PD-1/PD-L1 agents in patients with non-clear cells and rare histological subtype RCC. Then, we critically examine the current findings in biomarkers that have been proposed to be prognostic or predictive to the response of immunotherapy including immune gene expression signature, B7-H1 expression, PBRM1 loss of function, PD-L1 expression, frame shift indel count, mutations in bromodomain-containing genes in patients with MiT family translocation RCC (tRCC), high expression of the T-effector gene signature, and a high myeloid inflammation gene expression pattern. To date, a single biomarker as a predictor of response has not been established. Since the dynamic behavior of the immune response and the different impact of ICI treatment on patients with specific RCC subtypes, the integration of multiple biomarkers and further validation in clinical trials are needed.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Joravia, Dhawal H., and Kaushal B. Parikh. "Study on Performance of Infill Wall Masnory RCC Frame Using Alternative Types of Bricks – A Review." Journal of Advance Research in Mechanical & Civil Engineering (ISSN: 2208-2379) 2, no. 3 (March 31, 2015): 72–75. http://dx.doi.org/10.53555/nnmce.v2i3.358.

Повний текст джерела

Анотація:

The purpose of this literature review is to study the reduction of base shear and behavior of masonry in seismic loading and the evolution of interlocking brick methodologies and their different shapes. And also study Arrangement of infill walls with RCC frame in plan and elevation and base shear analysis using SAP2000 software. The study includes use of polymer material as make of polymer brick and study of availability of recyclable polymer material.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Divya, Rachakonda, and K. Murali. "Comparative study on design of steel structures and RCC frame structures based on column span." Materials Today: Proceedings 46 (2021): 8848–53. http://dx.doi.org/10.1016/j.matpr.2021.04.391.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Santosh Kumar et al.,, Santosh Kumar et al ,. "Strong Column Weak Beam Concept by Analysing RCC MRF Frame by Non-Linear Static Procedure." International Journal of Mechanical and Production Engineering Research and Development 10, no. 3 (2020): 3293–304. http://dx.doi.org/10.24247/ijmperdjun2020313.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Kude, Miss Diksha. "Influence of Zone Factor on Seismic Performance of Multi-Storied RCC Frame using ETABS 2016." International Journal for Research in Applied Science and Engineering Technology 8, no. 5 (May 31, 2020): 1758–67. http://dx.doi.org/10.22214/ijraset.2020.5284.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Kommalapati, Anuhya, Sri Harsha Tella, and Pavankumar Tandra. "Time to surgery (TTS) in renal cell carcinoma (RCC): Predictors and association with overall survival (OS)." Journal of Clinical Oncology 37, no. 15_suppl (May 20, 2019): e16107-e16107. http://dx.doi.org/10.1200/jco.2019.37.15_suppl.e16107.

Повний текст джерела

Анотація:

e16107 Background: Guidelines recommend surgical resection of primary tumor in stages 1-3 RCC. TTS refers to the time frame from the initial diagnosis to surgical resection of primary tumor. Shorter TTS has shown OS benefit in breast, head and neck cancers whereas longer TSS was shown to be acceptable in colon cancer. However, no such data exists for RCC. Using National Cancer Data Base (NCDB), we sought to determine the factors associated with TTS and its effect on OS. Methods: Patients with RCC who underwent partial or total nephrectomy were included, excluding those received neoadjuvant therapy. Logistic regression model was utilized to evaluate relative risk of delayed TTS. OS in association with TTS was estimated using the Kaplan-Meier method and Cox multivariate analysis (MVA). Results: A total of 60,198 RCC patients met the inclusion criteria. In contrast to a prior study that showed a median TTS of 41 days our study showed a median TTS of 35 days. We dichotomized the TTS as ≤ 35 days or ≥ 36 days. On MVA, TSS ≥ 36 days had significantly better OS (HR: 0.95 [CI:0.92-0.99], p < 0.01). Factors associated with TSS ≥ 36 days were race, insurance, higher Charlson score, lower grade, and getting managed at academic facilities and Pacific region (p < 0.01) (Table). Conclusions: A longer TTS with RCC is understandably associated with greater comorbidity, and non-private insurance, but questionably so in race, ethnicity, and facility related factors. However, given that TTS ≥ 36 days was not associated with higher risk of death, it may indicate that a reasonable delay could be pursued in certain cases for more accurate preoperative evaluation. [Table: see text]

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Islahuddin, Muhammad, R. K. Khare, and Amit Melani. "Non Linear Seismic Behavior of RCC Low Rise Flat Slab Building." Journal of Structural Technology 7, no. 3 (December 6, 2022): 20–25. http://dx.doi.org/10.46610/jost.2022.v07i03.004.

Повний текст джерела

Анотація:

The Building behaves nonlinearly as a result of both man-made and natural risks. Flat slab construction has several advantages over traditional RC frame construction. This work examines the progressive collapse analysis of a flat slab structure using a non-linear static analysis approach known as pushover analysis. In this sort of study, a computer model of a structure is exposed to a preset lateral load pattern. The modeling of a structure is done by software named ETABS, and pushover analysis is done. By doing this pushover analysis, we can identify the weak points in the structure and decide whether the specific portion of the building should be retrofitted or changed to satisfy the requirements. Pushover analysis is conducted in both positive and negative x and y directions. For each member, default hinge parameters based on the FEMA-356 and Applied Technology Council (ATC-40) criteria are applied.

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Arastu, Mohammad, and Prof Khalid Moin. "Study of Progressive Collapse of Precast Steel Reinforced Concrete Building." International Journal of Recent Technology and Engineering (IJRTE) 12, no. 1 (May 30, 2023): 81–94. http://dx.doi.org/10.35940/ijrte.a7617.0512123.

Повний текст джерела

Анотація:

Progressive collapse starts when any load-carrying elements of the building collapse during extreme loading, such as earthquakes, blasts, or fire. The Precast Steel Reinforced Concrete (PSRC) buildings comprise of precast RCC columns and steel girders. These structural elements are connected to form a moment-resisting frame and are susceptible to progressive collapse. However, this structural system has the advantage of inherent stiffness and damping during lateral loads and is also known for its construction efficiency, lightweight and low cost. Earlier investigations have shown PSRC systems useful in designing and constructing buildings while maintaining ample strength and high ductility during seismic incidents. Despite much previous research, the PSRC structural system's use is limited in high seismic regions. This paper aims to study the progressive collapse of the PSRC building using non-linear dynamic analysis and U.S. General Service Administration (GSA) guidelines during extreme loading. Two structures are studied to validate the performance of progressive collapse of PSRC and RCC structures. Four-story PSRC and RCC buildings are designed according to Indian Codes of practice. Design columns under provisions of the Indian reinforced concrete structures code, and beams are designed according to the Indian steel construction code. Comparative studies of progressive collapse for the two buildings are presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Sapate, Vishal, and Mahesh R. Chincholkar. "Tortional Effect in Vertically Mass Irregular RC Frame Structure under Response Spectrum Analysis." International Journal for Research in Applied Science and Engineering Technology 11, no. 7 (July 31, 2023): 2279–86. http://dx.doi.org/10.22214/ijraset.2023.55120.

Повний текст джерела

Анотація:

Abstract: The structures having discontinuity like distribution of mass, stiffness and geometry of the structure are termed as Irregular structures. Irregular structures contribute a large portion of urban infrastructure. The past earthquakes have shown catastrophic effect on the buildings with irregularities. It was seen that the buildings with irregularities are more prone to earthquake then the regular building. In the present study a special case of vertical mass irregularity are discussed. Six different models including three basic cases of buildings models i.e. vertically regular structure, vertically irregular structure and vertically irregular structure with shear wall at different position are taken for analysis by Response spectrum. It has observed that, the torsion, base reaction, displacement and modal load participation ratio in structure. This study exhibits effect of mass variation aspect of RCC structure

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ismail, Refaat Taleb, K. Rama Mohana Rao, and Srikanth Devi. "Estimation of Lateral Load Distribution Pattens in Nonlinear Static Procedures for RCC Framed Buildings." International Journal for Research in Applied Science and Engineering Technology 11, no. 1 (January 31, 2023): 356–63. http://dx.doi.org/10.22214/ijraset.2023.48575.

Повний текст джерела

Анотація:

Abstract: In the context of the seismic evaluation of building structures, nonlinear static analysis that makes use of pushover processes is becoming an increasingly common technique in engineering practice. In order to carry out a pushover study, the document FEMA-356 (2000) suggests using a variety of distributions of lateral forces. The use of these force distributions, on the other hand, does not adequately reflect the effects of modifying dynamic parameters across the inelastic response or the influence of higher modes. Four different lateral load patterns are investigated in this body of work by contrasting the pushover responses of RCC moment frame buildings with five and twelve stories.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Abbasi, Amir, and Shrikant Mishra. "Investigation of Building having Shear Wall and Bracings using Linear Dynamic Analysis." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (August 31, 2022): 478–84. http://dx.doi.org/10.22214/ijraset.2022.46224.

Повний текст джерела

Анотація:

Abstract: The design and analysis of earthquake resistant structures play importance factor all over the world. Hilly regions such as Ambikapur, Koriya, Dantewada & Jagdalpur district as a part of Chhattisgarh are more vulnerable in terms of seismic collapse structure in recent years and demand of high-rise structures with irregularity as given below is increasing now day due to high land cost & infrastructure there is much need or require of earthquake stability check. The paper is about analysis of different RCC Frames along with different cases of shear wall and X-bracing. The objectives of this paper are to model the asymmetry frame with different cases in respect to location of retrofitting, to examine seismic parameters such as story shear, displacement, compressive stress, story drift in order to check stability and to validate the best suitable location for asymmetry building and finding out their limitation.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "RCC FRAME"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями