Статті в журналах з теми "Radio-Frequency (RF) coils"
Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Radio-Frequency (RF) coils.
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Radio-Frequency (RF) coils".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
1
Truszkiewicz, Adrian, David Aebisher, Zuzanna Bober, Łukasz Ożóg, and Dorota Bartusik-Aebisher. "Radio Frequency MRI coils." European Journal of Clinical and Experimental Medicine 18, no. 1 (2020): 24–27. http://dx.doi.org/10.15584/ejcem.2020.1.5.
Повний текст джерелаАнотація:
Introduction. Magnetic Resonance Imaging (MRI) coils technology is a powerful improvement for clinical diagnostics. This includes opportunities for mathematical and physical research into coil design. Aim. Here we present the method applied to MRI coil array designs. Material and methods. Analysis of literature and self-research. Results. The coils that emit the radiofrequency pulses are designed similarly. As much as possible, they deliver the same strength of radiofrequency to all voxels within their imaging volume. Surface coils on the other hand are usually not embedded in cylindrical surfaces relatively close to the surface of the body. Conclusion. The presented here results relates to the art of magnetic resonance imaging (MRI) and RF coils design. It finds particular application of RF coils in conjunction with bore type MRI scanners.
2
Seo, Jeung-Hoon, Yeunchul Ryu, and Jun-Young Chung. "Simulation Study of Radio Frequency Safety and the Optimal Size of a Single-Channel Surface Radio Frequency Coil for Mice at 9.4 T Magnetic Resonance Imaging." Sensors 22, no. 11 (June 3, 2022): 4274. http://dx.doi.org/10.3390/s22114274.
Повний текст джерелаАнотація:
The optimized size of a single-channel surface radio frequency (RF) coil for mouse body images in a 9.4 T magnetic resonance imaging (MRI) system was determined via electromagnetic-field analysis of the signal depth according to the size of a single-channel coil. The single-channel surface RF coils used in electromagnetic field simulations were configured to operate in transmission/reception mode at a frequency of 9.4 T–400 MHz. Computational analysis using the finite-difference time-domain method was used to assess the single-channel surface RF coil by comparing single-channel surface RF coils of varying sizes in terms of |B1|-, |B1+|-, |B1−|- and |E|-field distribution. RF safety for the prevention of burn injuries to small animals was assessed using an analysis of the specific absorption rate. A single-channel surface RF coil with a 20 mm diameter provided optimal B1-field distribution and RF safety, thus confirming that single-channel surface RF coils with ≥25 mm diameter could not provide typical B1-field distribution. A single-channel surface RF coil with a 20 mm diameter for mouse body imaging at 9.4 T MRI was recommended to preserve the characteristics of single-channel surface RF coils, and ensured that RF signals were applied correctly to the target point within RF safety guidelines.
3
Seo, Jeung-Hoon, Young-Seung Jo, Chang-Hyun Oh, and Jun-Young Chung. "A New Combination of Radio-Frequency Coil Configurations Using High-Permittivity Materials and Inductively Coupled Structures for Ultrahigh-Field Magnetic Resonance Imaging." Sensors 22, no. 22 (November 19, 2022): 8968. http://dx.doi.org/10.3390/s22228968.
Повний текст джерелаАнотація:
In ultrahigh-field (UHF) magnetic resonance imaging (MRI) system, the RF power required to excite the nuclei of the target object increases. As the strength of the main magnetic field (B0 field) increases, the improvement of the RF transmit field (B1+ field) efficiency and receive field (B1− field) sensitivity of radio-frequency (RF) coils is essential to reduce their specific absorption rate and power deposition in UHF MRI. To address these problems, we previously proposed a method to simultaneously improve the B1+ field efficiency and B1− field sensitivity of 16-leg bandpass birdcage RF coils (BP-BC RF coils) by combining a multichannel wireless RF element (MCWE) and segmented cylindrical high-permittivity material (scHPM) comprising 16 elements in 7.0 T MRI. In this work, we further improved the performance of transmit/receive RF coils. A new combination of RF coil with wireless element and HPM was proposed by comparing the BP-BC RF coil with the MCWE and the scHPM proposed in the previous study and the multichannel RF coils with a birdcage RF coil-type wireless element (BCWE) and the scHPM proposed in this study. The proposed 16-ch RF coils with the BCWE and scHPM provided excellent B1+ field efficiency and B1− field sensitivity improvement.
4
Ahmad, Sheikh Faisal, Young Cheol Kim, Ick Chang Choi, and Hyun Deok Kim. "Recent Progress in Birdcage RF Coil Technology for MRI System." Diagnostics 10, no. 12 (November 27, 2020): 1017. http://dx.doi.org/10.3390/diagnostics10121017.
Повний текст джерелаАнотація:
The radio frequency (RF) coil is one of the key components of the magnetic resonance imaging (MRI) system. It has a significant impact on the performance of the nuclear magnetic resonance (NMR) detection. Among numerous practical designs of RF coils for NMR imaging, the birdcage RF coil is the most popular choice from low field to ultra-high field MRI systems. In the transmission mode, it can establish a strong and homogeneous transverse magnetic field B1 for any element at its Larmor frequency. Similarly, in the reception mode, it exhibits extremely high sensitivity for the detection of even faint NMR signals from the volume of interest. Despite the sophisticated 3D structure of the birdcage coil, the developments in the design, analysis, and implementation technologies during the past decade have rendered the development of the birdcage coils quite reasonable. This article provides a detailed review of the recent progress in the birdcage RF coil technology for the MRI system.
5
Duan, Yunsuo, Tamer S. Ibrahim, Bradley S. Peterson, Feng Liu, and Alayar Kangarlu. "Assessment of a PML Boundary Condition for Simulating an MRI Radio Frequency Coil." International Journal of Antennas and Propagation 2008 (2008): 1–10. http://dx.doi.org/10.1155/2008/563196.
Повний текст джерелаАнотація:
Computational methods such as the finite difference time domain (FDTD) play an important role in simulating radiofrequency (RF) coils used in magnetic resonance imaging (MRI). The choice of absorbing boundary conditions affects the final outcome of such studies. We have used FDTD to assess the Berenger's perfectly matched layer (PML) as an absorbing boundary condition for computation of the resonance patterns and electromagnetic fields of RF coils. We first experimentally constructed a high-pass birdcage head coil, measured its resonance pattern, and used it to acquire proton phantom MRI images. We then computed the resonance pattern and field of the coil using FDTD with a PML as an absorbing boundary condition. We assessed the accuracy and efficiency of PML by adjusting the parameters of the PML and comparing the calculated results with measured ones. The optimal PML parameters that produce accurate (comparable to the experimental findings) FDTD calculations are then provided for the birdcage head coil operating at 127.72 MHz, the Larmor frequency of at 3 Tesla (T).
6
Aebischer, H. A. "Inductance Formula for Square Spiral Inductors with Rectangular Conductor Cross Section." Advanced Electromagnetics 8, no. 4 (September 10, 2019): 80–88. http://dx.doi.org/10.7716/aem.v8i4.1074.
Повний текст джерелаАнотація:
Planar spiral coils are used as inductors in radio frequency (RF) microelectronic integrated circuits (IC’s) and as antennas in both radio frequency identification (RFID) and telemetry systems. They must be designed to a specified inductance. From the literature, approximate analytical formulae for the inductance of such coils with rectangular conductor cross section are known. They yield the direct current (DC) inductance, which is considered as a good approximation for inductors in RF IC’s up to the GHz range. In principle, these formulae can simplify coil design considerably. But a recent comparative study of the most cited formulae revealed that their maximum relative error is often much larger than claimed by the author, and too large to be useful in circuit design.
This paper presents a more accurate formula for the DC inductance of square planar spiral coils than was known so far. It is applicable to any design of such coils with up to windings. Owing to its scalability, this holds irrespectively of the coil size and the inductance range. It lowers the maximum error over the whole domain of definition from so far down to . This has been tested by the same method used in the comparative study mentioned above, where the precise reference inductances were computed with the help of the free standard software FastHenry2. A comparison to measurements is included. Moreover, the source code of a MATLAB® function to implement the formula is given in the appendix.
7
Hong, Seon-Eui, Sukhoon Oh, and Hyung-Do Choi. "RF Exposure Assessment for Various Poses of Patient Assistant in Open MRI Environment." Applied Sciences 11, no. 11 (May 28, 2021): 4967. http://dx.doi.org/10.3390/app11114967.
Повний текст джерелаАнотація:
In this study, the radio-frequency (RF) energy exposure of patient assistants was assessed for an open magnetic resonance imaging (MRI) system based on numerical computations of the head and body RF coil. Various poses of the patient assistants were defined to see how poorly they affected the RF energy exposure. For the assessments, the peak spatial-averaged specific absorption rate (SAR) levels were carefully compared with each patient assistant pose based on the finite-difference time domain calculations of RF coil models when the patient was placed in such coils in a 0.3 Tesla open MRI system. Overall, the SAR levels of the patient assistant were much lower than those of the patient. However, significantly increased SAR levels were observed under specific conditions, including a larger loop size of the patient assistants’ arms and a closer distance to the RF coils. A comparably high level of SAR to the patient’s body was also found. More careful investigations are needed to prevent the increase of SAR in patient assistants for open MRI systems at higher field strengths.
8
Ramsaroop, Neetu, and Oludayo O. Olugbara. "Wireless Power Transfer Using Harvested Radio Frequency Energy with Magnetic Resonance Coupling to Charge Mobile Device Batteries." Applied Sciences 11, no. 16 (August 21, 2021): 7707. http://dx.doi.org/10.3390/app11167707.
Повний текст джерелаАнотація:
This research paper presents the design of a wireless power transfer (WPT) circuit integrated with magnetic resonance coupling (MRC) and harvested radio frequency (RF) energy to wirelessly charge the battery of a mobile device. A capacitor (100 µF, 16 V) in the RF energy harvesting circuit stored the converted power, and the accumulated voltage stored in the capacitor was 9.46 V. The foundation of the proposed WPT prototype circuit included two coils (28 AWG)—a transmitter coil, and a receiver coil. The transmitter coil was energized by the alternating current (AC), which produced a magnetic field, which in turn induced a current in the receiver coil. The harvested RF energy (9.46 V) was converted into AC, which energized the transmitter coil and generated a magnetic field. The electronics in the receiver coil then converted the AC into direct current (DC), which became usable power to charge the battery of a mobile device. The experimental setup based on mathematical modeling and simulation displayed successful charging capabilities of MRC, with the alternate power source being the harvested RF energy. Mathematical formulae were applied to calculate the amount of power generated from the prototype circuit. LTSpice simulation software was applied to demonstrate the behavior of the different components in the circuit layout for effective WPT transfer.
9
Lu, Ming, Xiaoyang Zhang, Shuyang Chai, and Xinqiang Yan. "Improving Specific Absorption Rate Efficiency and Coil Robustness of Self-Decoupled Transmit/Receive Coils by Elevating Feed and Mode Conductors." Sensors 23, no. 4 (February 6, 2023): 1800. http://dx.doi.org/10.3390/s23041800.
Повний текст джерелаАнотація:
Self-decoupling technology was recently proposed for radio frequency (RF) coil array designs. Here, we propose a novel geometry to reduce the peak local specific absorption rate (SAR) and improve the robustness of the self-decoupled coil. We first demonstrate that B1 is determined by the arm conductors, while the maximum E-field and local SAR are determined by the feed conductor in a self-decoupled coil. Then, we investigate how the B1, E-field, local SAR, SAR efficiency, and coil robustness change with respect to different lift-off distances for feed and mode conductors. Next, the simulation of self-decoupled coils with optimal lift-off distances on a realistic human body is performed. Finally, self-decoupled coils with optimal lift-off distances are fabricated and tested on the workbench and MRI experiments. The peak 10 g-averaged SAR of the self-decoupled coil on the human body can be reduced by 34% by elevating the feed conductor. Less coil mismatching and less resonant frequency shift with respect to loadings were observed by elevating the mode conductor. Both the simulation and experimental results show that the coils with elevated conductors can preserve the high interelement isolation, B1+ efficiency, and SNR of the original self-decoupled coils.
10
Domenick, Robert, Phillip Foreman, David M. Parish, and Donald W. Pettibone. "4882540 Magnetic resonance imaging (MRI) apparatus with quadrature radio frequency (RF) coils." Magnetic Resonance Imaging 8, no. 6 (January 1990): I. http://dx.doi.org/10.1016/0730-725x(90)90025-w.
Повний текст джерела
11
Zărnescu, George-Claudiu, Lucian Pîslaru-Dănescu, and Athanasios Tiliakos. "Modular Electromagnetic Transducer for Optimized Energy Transfer via Electric and/or Magnetic Fields." Sensors 23, no. 3 (January 23, 2023): 1291. http://dx.doi.org/10.3390/s23031291.
Повний текст джерелаАнотація:
In this paper, a modular electromagnetic transducer that achieves the optimal transfer of energy from the electric and/or magnetic fields is proposed. Both the magnetic field resonance coupling and the influence of the electric field near the copper transducers of the printed circuit board and inside the FR4-type epoxy material are considered. In our printed arrays of flat transducers, we consider face-to-face capacitances for the study of resonance coupling. Because the space between coil turns is almost double the plate thickness, the coplanar capacitance can be ignored for frequencies under 2 MHz. A radio frequency (RF) transmitter and transducer were built to demonstrate the increased energy transfer efficiency when using both electric and magnetic fields in the near-field region. The transversal leakage flux coupling of a long RF coil was more efficient than a simple axial magnetic field coupling when using pancake transceiver coils. The optimal configuration having one long coil at the base and two or more flat coils as capacitor plates near coil ends generated the highest tandem of magnetic and electrical fields. A power regression tool was used to convert and simplify the transducer current and voltage variation with distance. In this regard, the current change corresponded to magnetic field variation and the voltage change to the electric field variation. New formulas for estimating the near-field region and the self-capacitance of the RF transformer coil are proposed; the optimal function in the frequency domain for a given transducer distance was defined by simulation.
12
Abuelhaija, Ashraf, and Gameel Saleh. "Dual tuned 1H/31P quadrature microstripline-based transmit/receive switch for 7 Tesla magnetic resonance imaging." International Journal of Electrical and Computer Engineering (IJECE) 12, no. 3 (June 1, 2022): 2177. http://dx.doi.org/10.11591/ijece.v12i3.pp2177-2183.
Повний текст джерелаАнотація:
<p><span>A dual tuned transmit/receive (T/R) Switch for 7 tesla magnetic resonance imaging</span> (MRI) that is based on concentric microstripline (MSL) coupler is introduced. The proposed switch is designed using two concentric MSL quadrature couplers on the top and bottom faces of the switch. The switch can be used to handle two frequency signals to/from two radio frequency (RF) coils. In this article, a 1H/31P atomic nuclei are excited. The two MSLs on the upper face of the switch are designed to transmit 298 and 120.6 MHz signals into RF coils, whereas each of the identical upper and lower MSLs are used to receive these signals from the RF coils. This switch can be used to transmit/receive signals from two RF coils at the same time, one work with 1H and the second with 31P atomic nuclei, and without any tuning. The proposed switch has been designed and simulated using the electromagnetic microwave studio computer simulation technology (CST). It demonstrates good matching (≈17 dB), low insertion loss (≈0.3) and high isolation (>70) for the 1H and 31P magnetic resonance signals at transmit mode. During receive mode, It demonstrates good matching (>20 dB), low insertion loss (≈0.2) and high isolation (>70) for the 1H and 31P magnetic resonance signals.</p>
13
Giovannetti, Giulio, Alessandra Flori, Maria Filomena Santarelli, Vincenzo Positano, Nicola Martini, Roberto Francischello, Rolf F. Schulte, et al. "Radio Frequency Coils for Hyperpolarized 13C Magnetic Resonance Experiments with a 3T MR Clinical Scanner: Experience from a Cardiovascular Lab." Electronics 10, no. 4 (February 3, 2021): 366. http://dx.doi.org/10.3390/electronics10040366.
Повний текст джерелаАнотація:
Hyperpolarized 13C magnetic resonance (MR) is a promising technique for the noninvasive assessment of the regional cardiac metabolism since it permits heart physiology studies in pig and mouse models. The main objective of the present study is to resume the work carried out at our electromagnetic laboratory in the field of radio frequency (RF) coil design, building, and testing. In this paper, first, we review the principles of RF coils, coil performance parameters, and estimation methods by using simulations, workbench, and MR imaging experiments. Then, we describe the simulation, design, and testing of different 13C coil configurations and acquisition settings for hyperpolarized studies on pig and mouse heart with a clinical 3T MRI scanner. The coil simulation is performed by developing a signal-to-noise ratio (SNR) model in terms of coil resistance, sample-induced resistance, and magnetic field pattern. Coil resistance was calculated from Ohm’s law and sample-induced resistances were estimated with a finite-difference time-domain (FDTD) algorithm. In contrast, the magnetic field per unit current was calculated by magnetostatic theory and a FDTD algorithm. The information could be of interest to graduate students and researchers working on the design and development of an MR coil to be used in 13C studies.
14
Qian, Zhongnan, Rui Yan, Zeqian Cheng, Jiande Wu, and Xiangning He. "Magnetic Positioning Technique Integrated with Near-Field Communication for Wireless EV Charging." Energies 13, no. 5 (March 1, 2020): 1081. http://dx.doi.org/10.3390/en13051081.
Повний текст джерелаАнотація:
For wireless electric vehicle charging, the relative position of the primary and secondary coils has significant impacts on the transferred power, efficiency and leakage magnetic flux. In this paper, a magnetic positioning method using simultaneous power and data transmission (SWPDT) is proposed for power coil alignment. Four signal coils are installed on the primary coil to detect the secondary coil position. By measuring the positioning signal amplitudes from the four signal coils, the power coil relative position can be obtained. Moreover, all the communication needed in the positioning process can be satisfied well by SWPDT technology, and no extra radio frequency (RF) communication hardware is needed. The proposed positioning method can work properly both in power transfer online condition and in power transfer offline condition. Thus, a highly integrated wireless charging system is achieved, which features simultaneous power transfer, data transmission and position detection. A positioning experimental setup is built to verify the proposed method. The experimental results demonstrate that the positioning resolution can be maintained no lower than 1 cm in a 1060 mm × 900 mm elliptical region for a pair of 510 mm × 410 mm rectangular power coils. The three-dimensional positioning accuracy achieves up to 1 cm.
15
Chiang, Yen-Chung, Juo-Chen Chen, and Yu-Hsin Chang. "A Study on the Variable Inductor Design by Switching the Main Paths and the Coupling Coils." Electronics 10, no. 15 (August 2, 2021): 1856. http://dx.doi.org/10.3390/electronics10151856.
Повний текст джерелаАнотація:
In a radio frequency (RF) system, it is possible to use variable inductors for providing tunable or selective frequency range. Variable inductors can be implemented by the microelectromechanical system (MEMS) process or by using transistors as switches to change the routing of coils or coupling quantities. In this paper, we investigated the design method of a variable inductor by using MOS transistors to switch the main coil paths and the secondary coupled coils. We observed the effects of different metal layers, turn numbers, and layout arrangements for secondary-coupled coils and compared their characteristics on the inductances and quality factors. We implemented two chips in the 0.18 μm CMOS process technology for each kind of arrangement for verification. One inductor can achieve inductance values from about 300 pH to 550 pH, and the other is between 300 pH and 575 pH, corresponding to 59.3% and 62.5%, respectively, inductance variation range at 4 GHz frequency. Additionally, their fine step sizes of the switched inductances are from 0.5% to 6% for one design, and 1% to 12.5% for the other. We found that both designs achieved a large inductance tuning range and moderate inductance step sizes with a slight difference behavior on the inductance variation versus frequency.
16
Kazemivalipour, Ehsan, Alireza Sadeghi-Tarakameh, Boris Keil, Yigitcan Eryaman, Ergin Atalar, and Laleh Golestanirad. "Effect of field strength on RF power deposition near conductive leads: A simulation study of SAR in DBS lead models during MRI at 1.5 T—10.5 T." PLOS ONE 18, no. 1 (January 26, 2023): e0280655. http://dx.doi.org/10.1371/journal.pone.0280655.
Повний текст джерелаАнотація:
Background Since the advent of magnetic resonance imaging (MRI) nearly four decades ago, there has been a quest for ever-higher magnetic field strengths. Strong incentives exist to do so, as increasing the magnetic field strength increases the signal-to-noise ratio of images. However, ensuring patient safety becomes more challenging at high and ultrahigh field MRI (i.e., ≥3 T) compared to lower fields. The problem is exacerbated for patients with conductive implants, such as those with deep brain stimulation (DBS) devices, as excessive local heating can occur around implanted lead tips. Despite extensive effort to assess radio frequency (RF) heating of implants during MRI at 1.5 T, a comparative study that systematically examines the effects of field strength and various exposure limits on RF heating is missing. Purpose This study aims to perform numerical simulations that systematically compare RF power deposition near DBS lead models during MRI at common clinical and ultra-high field strengths, namely 1.5, 3, 7, and 10.5 T. Furthermore, we assess the effects of different exposure constraints on RF power deposition by imposing limits on either the B1+ or global head specific absorption rate (SAR) as these two exposure limits commonly appear in MRI guidelines. Methods We created 33 unique DBS lead models based on postoperative computed tomography (CT) images of patients with implanted DBS devices and performed electromagnetic simulations to evaluate the SAR of RF energy in the tissue surrounding lead tips during RF exposure at frequencies ranging from 64 MHz (1.5 T) to 447 MHz (10.5 T). The RF exposure was implemented via realistic MRI RF coil models created based on physical prototypes built in our institutions. We systematically examined the distribution of local SAR at different frequencies with the input coil power adjusted to either limit the B1+ or the global head SAR. Results The MRI RF coils at higher resonant frequencies generated lower SARs around the lead tips when the global head SAR was constrained. The trend was reversed when the constraint was imposed on B1+. Conclusion At higher static fields, MRI is not necessarily more dangerous than at lower fields for patients with conductive leads. Specifically, when a conservative safety criterion, such as constraints on the global SAR, is imposed, coils at a higher resonant frequency tend to generate a lower local SAR around implanted leads due to the decreased B1+ and, by proxy, E field levels.
17
Kimmich, Rainer, Eberhard Rommel, and Peter Nickel. "NQR Imaging." Zeitschrift für Naturforschung A 47, no. 1-2 (February 1, 1992): 361–66. http://dx.doi.org/10.1515/zna-1992-1-261.
Повний текст джерелаАнотація:
AbstractA rotating-frame NQR imaging (ᵨNQRI) procedure based on pure NQR is reported. The technique is suitable for powdery or crystalline solid materials containing quadrupole nuclei. The spatial information is encoded by gradients of the radio frequency amplitude of the excitation pulse. A special deconvolution procedure has been developed for the analysis of the spatial information encoded in the pseudo-FID of the NQR signal in the case of powder geometry. The technique is applicable to rotationally symmetric as well as to asymmetric electric field gradient tensors. The RF gradients are suitably produced by surface coils. The prominent advantage of surface-coil NQR is that objects larger than the coil diameter can be investigated. The imaging procedure then provides depth resolution in a range of the order of the coil radius. The technique is particularly suitable for the detection of gradients of physical parameters influencing the NQR line shift and of spatial distributions of the chemical composition. Examples are stress or temperature gradients. Twodimensional images have been produced by rotating the sample step by step. For each orientation a profile across the sample is evaluated as the projection on the direction of the radio-frequency gradient. A projection-reconstruction formalism then permits the rendering of two-dimensional NQR images.
18
Li, Haiwang, Kaiyun Zhu, Tiantong Xu, Kaibo Lei, and Jingchao Xia. "Design and Manufacture of Millimeter-Scale 3D Transformers for RF-IC." Micromachines 13, no. 12 (December 7, 2022): 2162. http://dx.doi.org/10.3390/mi13122162.
Повний текст джерелаАнотація:
The development of radio-frequency integrated circuits (RF-IC) necessitates higher requirements for the size of microtransformers. This paper describes millimeter-scale 3D transformers in millimeter-scale, solenoidal, and toroidal transformers manufactured using Micro-electromechanical Systems (MEMS). Two through-silicon via (TSV) copper coils with a high aspect ratio are precisely interleaved on a reserved air core (magnet core cavity) with a vertical height of over 1 mm because of the thickness of the substrate, which increases the performance while reducing the footprint. The effects of the wire width, coil turns, magnetic core, and substrate on the performance of the two transformers are discussed through numerical simulations. When an air core is present, solenoidal transformers are better than toroidal transformers in terms of performance and footprint; however, the gap decreases when the size is reduced. Additionally, the magnetic core significantly improves the performance of the toroidal transformer compared to that of the solenoid. Thus, the toroidal transformer has a higher potential for further size reduction. The two types of transformers were then manufactured completely using MEMS and electroplating. This paper discusses the influence of various parameters on millimeter-scale 3D transformers and realizes processing in silicon, which provides the foundation for integrating transformers in a chip.
19
Aebischer, H. A. "Comparative Study of the Accuracy of Analytical Inductance Formulae for Square Planar Spiral Inductors." Advanced Electromagnetics 7, no. 5 (September 19, 2018): 37–48. http://dx.doi.org/10.7716/aem.v7i5.862.
Повний текст джерелаАнотація:
In the design of radio frequency (RF) microelectronic integrated circuits (IC’s) and of antennas for short-wave radio frequency identification (RFID) and telemetry systems, planar spiral coils are important components. Many approximate analytical formulae for calculating the inductance of such coils can be found in the literature. They can simplify the problem of designing inductors to a predefined inductance considerably. But the error statistics given by different authors cannot be compared because they are based on different or unknown domains of definition. Hence, it is not possible to decide which formula is best in a given case by merely studying the literature. This paper compares the maximum relative errors of six of some of the most cited formulae in the literature. To all formulae, the same domains of definition are applied. Each of them spans all four dimensions of the parameter space. Precise inductances are obtained numerically with the help of the free scientific and industrial standard software FastHenry2 and used as reference values to calculate the errors of the formulae. It has been found that the alleged maximum errors reported by some authors are far too optimistic. Only two formulae feature small enough errors to be useful in circuit design. The method and the domains of definition applied in the present study may also prove useful for the assessment of future formulae.
20
Pashova, Katya, Elyes Dhaouadi, Ivaylo Hinkov, Ovidiu Brinza, Yves Roussigné, Manef Abderrabba, and Samir Farhat. "Graphene Synthesis by Inductively Heated Copper Foils: Reactor Design and Operation." Coatings 10, no. 4 (March 25, 2020): 305. http://dx.doi.org/10.3390/coatings10040305.
Повний текст джерелаАнотація:
We report on the design of a reactor to grow graphene via inductively heating of copper foils by radio frequency (RF) magnetic fields. A nearly uniform magnetic field induced by Helmholtz-like coils penetrates the copper foil generating eddy currents. While the frequency of the current is being rapidly varied, the substrate temperature increases from room temperature to ~1050 °C in 60 s. This temperature is maintained under Ar/H2 flow to reduce the copper, and under Ar/H2/CH4 to nucleate and grow the graphene over the entire copper foil. After the power cut-off, the temperature decreases rapidly to room temperature, stopping graphene secondary nucleation. Good quality graphene was obtained and transferred onto silicon, and coated with a 300 nm layer of SiO2 by chemical etching of the copper foil. After synthesis, samples were characterized by Raman spectroscopy. The design of the coils and the total power requirements for the graphene induction heating system were first estimated. Then, the effect of the process parameters on the temperature distribution in the copper foil was performed by solving the transient and steady-state coupled electromagnetic and thermal problem in the 2D domain. The quantitative effects of these process parameters were investigated, and the optimization analysis results are reported providing a root toward a scalable process for large-sized graphene.
21
Guo, Yi-Xin, Cong Lai, Zhi-Biao Shao, Kai-Liang Xu, and Ting Li. "Differential Structure of Inductive Proximity Sensor." Sensors 19, no. 9 (May 13, 2019): 2210. http://dx.doi.org/10.3390/s19092210.
Повний текст джерелаАнотація:
The inductive proximity sensor (IPS) is applicable to displacement measurements in the aviation field due to its non-mechanical contact, safety, and durability. IPS can increase reliability of position detection and decrease maintenance cost of the system effectively in aircraft applications. Nevertheless, the specialty in the aviation field proposes many restrictions and requirements on the application of IPS, including the temperature drift effect of the resistance component of the IPS sensing coil. Moreover, reliability requirements of aircrafts restrict the use of computational-intensive algorithms and avoid the use of process control components. Furthermore, the environment of airborne electronic equipment restricts measurements driven by large current and proposes strict requirements on emission tests of radio frequency (RF) energy. For these reasons, a differential structured IPS measurement method is proposed in this paper. This measurement method inherits the numerical separation of the resistance and inductance components of the IPS sensing coil to improve the temperature adaptation of the IPS. The computational complexity is decreased by combining the dimension-reduced look-up table method to prevent the use of process control components. The proposed differential structured IPS is equipped with a differential structure of distant and nearby sensing coils to increase the detection accuracy. The small electric current pulse excitation decreases the RF energy emission. Verification results demonstrate that the differential structured IPS realizes the numerical decoupling calculation of the vector impedance of the sensing coil by using 61 look-up table units. The measuring sensitivity increased from 135.5 least significant bits (LSB)/0.10 mm of a single-sensing-coil structured IPS to 1201.4 LSB/0.10 mm, and the linear approximation distance error decreased from 99.376 μm to −3.240 μm. The proposed differential structured IPS method has evident comparative advantages compared with similar measuring techniques.
22
Kordzadeh, Atefeh, Dominik Holzmann, Alfred Binder, Thomas Moldaschl, Johannes Sturm, and Ali Roshanghias. "Miniaturized On-Chip NFC Antenna versus Screen-Printed Antenna for the Flexible Disposable Sensor Strips." IoT 1, no. 2 (October 28, 2020): 309–19. http://dx.doi.org/10.3390/iot1020018.
Повний текст джерелаАнотація:
With the ongoing trend toward miniaturization via system-on-chip (SoC), both radio-frequency (RF) SoCs and on-chip multi-sensory systems are gaining significance. This paper compares the inductance of a miniaturized on-chip near field communication (NFC) antenna versus the conventional screen-printed on-substrate ones that have been used for the transfer of sensory data from a chip to a cell phone reader. Furthermore, the transferred power efficiency in a coupled NFC system is calculated for various chip coil geometries and the results are compared. The proposed NFC antenna was fabricated via a lithography process for an application-specific integrated circuit (ASIC) chip. The chip had a small area of 2.4 × 2.4 mm2, therefore a miniaturized NFC antenna was designed, whereas the screen-printed on-substrate antennas had an area of 35 × 51 mm2. This paper investigates the effects of different parameters such as conductor thickness and materials, double layering, and employing ferrite layers with different thicknesses on the performance of the on-chip antennas using full-wave simulations. The presence of a ferrite layer to increase the inductance of the antenna and mitigate the interactions with backplates has proven useful. The best performance was obtained via double-layering of the coils, which was similar to on-substrate antennas, while a size reduction of 99.68% was gained. Consequently, the coupling factors and maximum achievable power transmission efficiency of the on-chip antenna and on-substrate antenna were studied and compared.
23
Retico, Alessandra, Francesca Maggiorelli, Giulio Giovannetti, Eddy Boskamp, Fraser Robb, Marco Fantasia, Angelo Galante, Marcello Alecci, Gianluigi Tiberi, and Michela Tosetti. "Double-Tuned Birdcage Radio Frequency Coil for 7 T MRI: Optimization, Construction and Workbench Validation." Electronics 12, no. 4 (February 10, 2023): 901. http://dx.doi.org/10.3390/electronics12040901.
Повний текст джерелаАнотація:
The aim of the present study is the optimization, construction, and workbench validation of a double-tuned 1H- 23Na volume radio frequency (RF) coil suitable for human head imaging at 7 T, based on the birdcage geometry. The birdcage-like design which is considered is the four-ring model, in which two standard birdcage-like structures with the same diameters are nested along the longitudinal axis. Simulations based on Maxwell’s equations are performed to evaluate the RF magnetic field homogeneity and the RF coil efficiency varying the coil geometrical parameters. The RF magnetic field homogeneity is evaluated both on the transverse (z = 0) and longitudinal (y = 0) planes without performing the impedance matching procedure, so that the RF coil symmetry is not perturbed by the matching network. The RF coil efficiency is instead dependent on the effective coil input RF power, and it is evaluated after matching the coil, so that the reflected power is minimized, assuming that the stimulation power is totally delivered to the RF coil. Considering the simulation results and the target application, the useful RF coil geometrical parameters are fixed. The four-ring model, which showed the best performances, has been built and tested on a workbench, using a cylindrical phantom filled with a 0.05 M saline solution as load. This provides the first example of a four-ring realization intended 1H- 23Na for human head imaging at 7 T.
24
Luo, Chao, Xiao Qing Hu, Chun Lai Li, Xiao Chen, Xiao Liang Zhang, Sheng Ping Liu, Xin Liu, et al. "Electromagnetic Simulation of Influence of Metamaterial for Magnetic Resonance Imaging at 3T." Materials Science Forum 848 (March 2016): 347–50. http://dx.doi.org/10.4028/www.scientific.net/msf.848.347.
Повний текст джерелаАнотація:
This paper presents an approach to investigate the influence of metamaterial to radio-frequency (RF) magnetic field in magnetic resonance imaging (MRI) at 3T. The variety of magnetic fields of RF receiving coil was calculated using the commercial electromagnetic simulation software (CST). The simulation results demonstrate that the transmitting and receiving magnetic field (B1+ and B1-) can be enhanced when the metamaterial is inserted into the RF coil, suggesting that the metamaterial has potential in MRI applications at 3T.
25
Dou, Yan, Jinzhang Xu, Yuxia Hu, Liangliang Hu, Yi Wang, Xun Zhang, Rui Zhang, and Meichu Huang. "Optimization and Testing of a 1H/3He Double-Nuclear Quadrature Transmit Coil, Applying the Analytical Method at 0.06T." Journal of Medical Imaging and Health Informatics 10, no. 11 (November 1, 2020): 2699–706. http://dx.doi.org/10.1166/jmihi.2020.3203.
Повний текст джерелаАнотація:
Application of polarized noble gas technology in lung functional magnetic resonance imaging (fMRI) has garnered attention for its unique advantages, such as high resolution and a lack of radiation exposure. This paper presents a 4-channel radio frequency (RF) coil design method for applications of an 1H/3He MRI system at the ultra-low field of 0.06T. For the complex model of the double-nuclear 1H/3He coil, the analytical optimization method (based on the theories of Biot-Savart law and PSO algorithm) and the electromagnetic (EM) field and radio frequency (RF) circuit co-simulation method was implemented to optimize the analysis, resulting in an effective evaluation. The simulation results demonstrated that the proposed model has the potential for imaging of the lung with the 1H/3He MRI system at an ultra-low field.
26
Aebischer, Kathrin, Nino Wili, Zdeněk Tošner, and Matthias Ernst. "Using nutation-frequency-selective pulses to reduce radio-frequency field inhomogeneity in solid-state NMR." Magnetic Resonance 1, no. 2 (September 9, 2020): 187–95. http://dx.doi.org/10.5194/mr-1-187-2020.
Повний текст джерелаАнотація:
Abstract. Radio-frequency (rf) field inhomogeneity is a common problem in NMR which leads to non-ideal rotations of spins in parts of the sample. Often, a physical volume restriction of the sample is used to reduce the effects of rf-field inhomogeneity, especially in solid-state NMR where spacers are inserted to reduce the sample volume to the centre of the coil. We show that band-selective pulses in the spin-lock frame can be used to apply B1-field selective inversions to spins that experience selected parts of the rf-field distribution. Any frequency band-selective pulse can be used for this purpose, but we chose the family of I-BURP pulses (Geen and Freeman, 1991) for the measurements demonstrated here. As an example, we show that the implementation of such pulses improves homonuclear frequency-switched Lee–Goldburg decoupling in solid-state NMR.
27
Jiang, Wenjia, Liqiu Wei, Wenjie Fu, Bin Yu, Yan Song, Kai Cui, Yixuan Liu, and Daren Yu. "A newly designed ignition method for miniature radio frequency ion thruster." Review of Scientific Instruments 93, no. 3 (March 1, 2022): 033506. http://dx.doi.org/10.1063/5.0071914.
Повний текст джерелаАнотація:
The ignition methods used by micro-radio frequency (RF) ion thrusters have a disadvantage, that is, the starting voltage and flow rate are obviously higher than the rated value, which will easily damage the grid after long-term use. To decrease the starting voltage and flow and reduce the damage to the grid, a new ignition system is proposed in this paper. This system uses an intake pipe as the ground electrode, has an inductance coil and a pre-ionization chamber, and enables the miniature RF ion thruster (Harbin Institute of Technology’s RF Ion Thruster 4, HRIT-4) to ignite at the rated voltage and flow by means of strong electric field breakdown and electromagnetic coupling. The experimental results show that when the flow rate is 1.0 SCCM, the ignition voltage is lower than 1900 V, and when the flow rate is 1.5 SCCM, the ignition voltage is lower than 1400 V.
28
Shigeta, Masaya, and Hideya Nishiyama. "Numerical Analysis of Metallic Nanoparticle Synthesis Using RF Inductively Coupled Plasma Flows." Journal of Heat Transfer 127, no. 11 (June 3, 2005): 1222–30. http://dx.doi.org/10.1115/1.2039106.
Повний текст джерелаАнотація:
A thermal plasma flow is regarded as a multifunctional fluid with high energy density, high chemical reactivity, variable properties, and controllability by electromagnetic fields. Especially a radio frequency inductively coupled plasma (RF-ICP) flow has a large plasma volume, long chemical reaction time, and a high quenching rate. Besides, it is inherently clean because it is produced without internal electrodes. An RF-ICP flow is, therefore, considered to be very useful for nanoparticle synthesis. However, nanoparticle synthesis using an RF-ICP flow includes complicated phenomena with field interactions. In the present study, numerical analysis was conducted to investigate the synthesis of metallic nanoparticles using an advanced RF-ICP reactor. An advanced RF-ICP flow is generated by adding direct current (DC) discharge to a conventional RF-ICP flow in order to overcome the disadvantages of a conventional one. The objectives of the present work are to clarify the formation mechanism of metallic nanoparticles in advanced RF-ICP flow systems and to detect effective factors on required synthesis. A two-dimensional model as well as a one-dimensional model was introduced for nanoparticle growth to investigate effects of spatial distributions of thermofluid fields in RF-ICP flows on synthesized nanoparticles. In an advanced RF-ICP flow, a characteristic recirculation zone disappears due to a DC plasma jet. Larger numbers of nanoparticles with smaller size are produced by using an advanced RF-ICP flow. Thermofluid fields in RF-ICP flows can be controlled by applied coil frequency by means of skin effect. Larger numbers of nanoparticles with smaller size are produced near the central axis. Dispersion of particle size distributions can be suppressed by higher applied coil frequency through control of RF-ICP flows. Applied coil frequency can be a remarkably effective factor to control nanoparticle size distribution.
29
Kumar, Suchit, Han-Jae Chung, You-Jin Jeong, Heung-Kyu Lee, and Chang-Hyun Oh. "Design and Implementation of Split-Leg Type Elliptical Whole-Body Birdcage RF Coil at 1.5 T MRI." Applied Sciences 11, no. 16 (August 13, 2021): 7448. http://dx.doi.org/10.3390/app11167448.
Повний текст джерелаАнотація:
The feasibility and the development of a four-port elliptical birdcage radio frequency (RF) coil for generating a homogenous RF magnetic (B1) field is presented for a space-constrained narrow-bore magnetic resonance imaging (MRI) system. Optimization was performed for the elliptical birdcage RF coil by adjusting the position and the structure of the legs to maximize the B1+-field uniformity. Electromagnetic (EM) simulations based on RF coil circuit co-simulations were performed on a cylindrical uniform phantom and a three-dimensional human model to evaluate the B1+-field uniformity, the transmission efficiency, and the specific absorption rate (SAR) deposition. An elliptical birdcage RF coil was constructed, and its performance was evaluated through network analysis measurements such as S-parameters and Q-factor. Quadrature transmit and receive MRI experiments were conducted using both phantom and in vivo human for validation. The EM simulation results indicate reasonable B1+-field uniformity and transmission efficiency for the proposed elliptical birdcage RF coil. The signal-to-noise ratio and the flip angle maps of the uniform phantom and the in vivo human MR images acquired using an elliptical birdcage (62 cm × 58 cm) were similar to those of a commercial circular birdcage (diameter, 58 cm), thereby indicating acceptable performance. In conclusion, the proposed split-type asymmetric elliptical birdcage RF coil is useful for whole-body MRI applications and can be used for imaging larger human subjects comfortably in a spacious imaging space.
30
Shibata, T., K. Ohkoshi, K. Shinto, K. Nanmo, K. Ikegami, and H. Oguri. "Soundness evaluation of J-PARC RF ion source after 5-month continuous operation." Journal of Physics: Conference Series 2244, no. 1 (April 1, 2022): 012041. http://dx.doi.org/10.1088/1742-6596/2244/1/012041.
Повний текст джерелаАнотація:
Abstract In the J-PARC user operation from Nov. 2020 – Apr. 2021, continuous operation of J-PARC Radio Frequency (RF) negative hydrogen ion (H-) source up to 3,651 hours (5 months) has been achieved. The ion source was operated with the output H- current of 60 mA, the duty factor (for plasma generation) 2% and the input RF power up to 30 kW. After the operation, phase space diagrams at the Radio Frequency Quadrupole linac (RFQ) entrance were measured by the emittance monitor at the ion source test stand (IS-TS) under the same operation condition as in the J-PARC Linac. Comparison of the phase spaces and the beam emittances between the ion sources in the present and the previous operations shows slight difference. From the direct observation of the antenna coil, no exhaustion or the decrease in the thickness of the enamel coating of the coil have been confirmed. The results indicate the possibility of the next goal of the long-run up to 7 months, which is the same as the full duration of the J-PARC user operation in 1 year.
31
Zhao, Yan, Xiaobin Yu, Wei Zhao, Gen Li, Guangpeng Liu, Yanrui Ma, Le Chu, et al. "Inactivation of Endogenous Pectin Methylesterases by Radio Frequency Heating during the Fermentation of Fruit Wines." Fermentation 8, no. 6 (June 6, 2022): 265. http://dx.doi.org/10.3390/fermentation8060265.
Повний текст джерелаАнотація:
Pectin methylesterase (PME) is a methyl ester group hydrolytic enzyme of either plant or microbial origin. Importantly, endogenous PMEs in fruits can catalyze the demethoxylation of pectin with a bulk release of methanol, largely impacting the fruit juice and wine industries. Here, we demonstrated radio frequency (RF) heating for inactivation of endogenous PMEs and investigated the relevant mechanisms underpinning enzymatic inactivation. The RF heating curve indicated that the optimal heating rate was achieved at an electrode gap of 90 mm (compared to 100 mm and 110 mm) and that the inactivation rate of the enzyme increases with heating time. RF heating exhibited better effects on enzymatic inactivation than traditional water heating, mainly by changing the secondary structures of PMEs, including α-helix, β-sheet, β-turn, and random coil. Moreover, fluorescence spectroscopy indicated changes in the tertiary structure with a significant increase in fluorescence intensity. Significantly, application of RF heating for inactivation of PMEs resulted in a 1.5-fold decrease in methanol during the fermentation of jujube wine. Collectively, our findings demonstrated an effective approach for inactivating endogenous PMEs during the bioprocesses of fruits.
32
Zhao, Yan, Xiaobin Yu, Wei Zhao, Gen Li, Guangpeng Liu, Yanrui Ma, Le Chu, et al. "Inactivation of Endogenous Pectin Methylesterases by Radio Frequency Heating during the Fermentation of Fruit Wines." Fermentation 8, no. 6 (June 6, 2022): 265. http://dx.doi.org/10.3390/fermentation8060265.
Повний текст джерелаАнотація:
Pectin methylesterase (PME) is a methyl ester group hydrolytic enzyme of either plant or microbial origin. Importantly, endogenous PMEs in fruits can catalyze the demethoxylation of pectin with a bulk release of methanol, largely impacting the fruit juice and wine industries. Here, we demonstrated radio frequency (RF) heating for inactivation of endogenous PMEs and investigated the relevant mechanisms underpinning enzymatic inactivation. The RF heating curve indicated that the optimal heating rate was achieved at an electrode gap of 90 mm (compared to 100 mm and 110 mm) and that the inactivation rate of the enzyme increases with heating time. RF heating exhibited better effects on enzymatic inactivation than traditional water heating, mainly by changing the secondary structures of PMEs, including α-helix, β-sheet, β-turn, and random coil. Moreover, fluorescence spectroscopy indicated changes in the tertiary structure with a significant increase in fluorescence intensity. Significantly, application of RF heating for inactivation of PMEs resulted in a 1.5-fold decrease in methanol during the fermentation of jujube wine. Collectively, our findings demonstrated an effective approach for inactivating endogenous PMEs during the bioprocesses of fruits.
33
Wang, Lei, Atsushi Sekimoto, Yuto Takehara, Yasunori Okano, Toru Ujihara, and Sadik Dost. "Optimal Control of SiC Crystal Growth in the RF-TSSG System Using Reinforcement Learning." Crystals 10, no. 9 (September 7, 2020): 791. http://dx.doi.org/10.3390/cryst10090791.
Повний текст джерелаАнотація:
We have developed a reinforcement learning (RL) model to control the melt flow in the radio frequency (RF) top-seeded solution growth (TSSG) process for growing more uniform SiC crystals with a higher growth rate. In the study, the electromagnetic field (EM) strength is controlled by the RL model to weaken the influence of Marangoni convection. The RL model is trained through a two-dimensional (2D) numerical simulation of the TSSG process. As a result, the growth rate under the control of the RL model is improved significantly. The optimized RF-coil parameters based on the control strategy for the 2D melt flow are used in a three-dimensional (3D) numerical simulation for model validation, which predicts a higher and more uniform growth rate. It is shown that the present RL model can significantly reduce the development cost and offers a useful means of finding the optimal RF-coil parameters.
34
Spataro, Simone, Nunzio Spina, and Egidio Ragonese. "Package-Scale Galvanic Isolators Based on Radio Frequency Coupling: Micro–Antenna Design." Electronics 11, no. 3 (January 18, 2022): 291. http://dx.doi.org/10.3390/electronics11030291.
Повний текст джерелаАнотація:
This paper presents the design of on-chip micro-antennas for package-scale galvanic isolators based on RF planar coupling. A step-by-step design procedure is proposed, which aims at the maximization of the weak electromagnetic coupling between the RX and TX antennas integrated on side-by-side co-packaged chips to enable both high isolation rating and common-mode transient immunity thanks to the high dielectric strength and low capacitive parasitics of a molding compound-based galvanic barrier, respectively. Micro-antenna design guidelines are drawn, highlighting the main relationship between coil coupling performance and their layout parameters, which are often in contrast with respect to traditional integrated inductor ones.
35
Zhao, Y., and Z. F. Ding. "Comments on mechanisms for self-E → H and inverse H → E mode transitions in radio frequency inductively coupled plasmas." Physics of Plasmas 29, no. 8 (August 2022): 084503. http://dx.doi.org/10.1063/5.0107483.
Повний текст джерелаАнотація:
The previously observed self-E [Formula: see text] H and inverse [Formula: see text] mode transitions were explained by unrelated mechanisms. The argument in this Brief Communication finds that both mode transitions can be interpreted via wall-heating that affects electron density by changing neutral density. In the self-E [Formula: see text] H mode transition, the shift of the preset E-mode discharge to the E [Formula: see text] H mode-transition point is caused by the increasing neutral density in the cooling down process of the chamber wall overheated in the preceding high-power H-mode discharge. The requirement for the inverse H [Formula: see text] mode transitions is a small-sized cylindrical radio frequency (RF) inductively coupled plasma source powered by multi-turn coil under which the strong wall-heating in the ramping-up phase of RF power or RF coil current leads to a reduction of neutral density in the subsequent ramping-down phase. The wall-heating can affect all processes in gas discharges but is most remarkable near a mode transition. The wall-heating effect on discharge mode transition has not been intensively investigated but was only suggested to explain the unknown mode transition in an electron cyclotron resonance plasma source [Jarnyk et al., Appl. Phys. Lett. 62, 2039 (1993)].
36
Garverick, Steven L., Michael Kane, Wen H. Ko, and Anthony J. Maniglia. "External Unit for a Semi-Implantable Middle Ear Hearing Device." Ear, Nose & Throat Journal 76, no. 6 (June 1997): 397–401. http://dx.doi.org/10.1177/014556139707600609.
Повний текст джерелаАнотація:
A miniaturized, low-power external unit has been developed for the clinical trials of a semi-implantable middle ear electromagnetic hearing device (SIMEHD) which uses radio-frequency telemetry to couple sound signals to the internal unit. The external unit is based on a commercial hearing aid which provides proven audio amplification and compression. Its receiver is replaced by an application-specific integrated circuit (ASIC) which: 1) adjusts the direct-current bias of the audio input according to its peak value; 2) converts the audio signal to a one-bit digital form using Σ—Δ modulation; 3) modulates the Σ—Δ output with a radio-frequency (RF) oscillator; and 4) drives the external RF coil and tuning capacitor using a field-effect transistor operated in class D. The external unit functions as expected and has been used to operate bench-top tests of the SIMEHD. Measured current consumption is 1.65 - 2.15 mA, which projects to a battery lifetime of about 15 days. Bandwidth is 6 kHz and harmonic distortion is about 2%.
37
Bellakhal, N., K. Draou, and J. L. Brisset. "Nitriding of 304 Steel by a Nitrogen Plasma: Increasing Corrosion Resistance." Journal of Chemical Research 23, no. 1 (January 1999): 38–39. http://dx.doi.org/10.1177/174751989902300125.
Повний текст джерелаАнотація:
Exposure of a 304 stainless steel sample to an inductively coupled low pressure radio frequency (RF) nitrogen plasma leads to the formation of a nitriding layer. The protective properties of this layer are investigated by electrochemical methods. The corrosion potential of the steel in an aqueous solution depends on the working parameters of the plasma such as the time exposure and the distance between the steel sample and the high voltage (HV) coil of the treatment reactor.
38
Kozlov, Mikhail, Marc Horner, Wolfgang Kainz, Nikolaus Weiskopf, and Harald E. Möller. "Modeling radio-frequency energy-induced heating due to the presence of transcranial electric stimulation setup at 3T." Magnetic Resonance Materials in Physics, Biology and Medicine 33, no. 6 (May 27, 2020): 793–807. http://dx.doi.org/10.1007/s10334-020-00853-5.
Повний текст джерелаАнотація:
Abstract Purpose The purpose of the present study was to develop a numerical workflow for simulating temperature increase in a high-resolution human head and torso model positioned in a whole-body magnetic resonance imaging (MRI) radio-frequency (RF) coil in the presence of a transcranial electric stimulation (tES) setup. Methods A customized human head and torso model was developed from medical image data. Power deposition and temperature rise (ΔT) were evaluated with the model positioned in a whole-body birdcage RF coil in the presence of a tES setup. Multiphysics modeling at 3T (123.2 MHz) on unstructured meshes was based on RF circuit, 3D electromagnetic, and thermal co-simulations. ΔT was obtained for (1) a set of electrical and thermal properties assigned to the scalp region, (2) a set of electrical properties of the gel used to ensure proper electrical contact between the tES electrodes and the scalp, (3) a set of electrical conductivity values of skin tissue, (4) four gel patch shapes, and (5) three electrode shapes. Results Significant dependence of power deposition and ΔT on the skin’s electrical properties and electrode and gel patch geometries was observed. Differences in maximum ΔT (> 100%) and its location were observed when comparing the results from a model using realistic human tissue properties and one with an external container made of acrylic material. The electrical and thermal properties of the phantom container material also significantly (> 250%) impacted the ΔT results. Conclusion Simulation results predicted that the electrode and gel geometries, skin electrical conductivity, and position of the temperature sensors have a significant impact on the estimated temperature rise. Therefore, these factors must be considered for reliable assessment of ΔT in subjects undergoing an MRI examination in the presence of a tES setup.
39
Beissner, Florian, Ulrike Nöth, and Thomas Schockert. "The Problem of Metal Needles in Acupuncture-fMRI Studies." Evidence-Based Complementary and Alternative Medicine 2011 (2011): 1–5. http://dx.doi.org/10.1155/2011/808203.
Повний текст джерелаАнотація:
Acupuncture is a therapy based on sensory stimulation of the human body by means of metal needles. The exact underlying mechanisms of acupuncture have not been clarified so far. Functional magnetic resonance imaging (fMRI) has become an important tool in acupuncture research. Standard acupuncture needles, which are made of ferromagnetic steel, however, are problematic in acupuncture-fMRI studies for several reasons, such as attraction by the scanner's magnetic field, significant image distortions and signal-dropouts, when positioned close to the head or even heating due to absorption of radio frequency (RF). The aim of this study was to compare two novel types of acupuncture needles with a standard needle for their effect on MRI image quality. The standard needle severely reduced image quality, when located inside the RF coil. The nonferromagnetic metal needle may pose a risk due to RF heating, while the plastic needle has a significantly larger diameter. In conclusion, our recommendations are: (1) standard needles should not be used in MRI; (2) Nonferromagnetic metal needles seem to be the best choice for acupoints outside of the transmitter coil; and (3) only plastic needles are suited for points inside the coil. Laser acupuncture may be a safe alternative, too.
40
Li, Yiyuan, Jianhua Li, and Lixin Xu. "Method of Calculating the Inductance Value of MEMS Suspended Inductors with Silicon Substrates." Micromachines 9, no. 11 (November 17, 2018): 604. http://dx.doi.org/10.3390/mi9110604.
Повний текст джерелаАнотація:
Microelectromechanical system (MEMS) suspended inductors have excellent radio-frequency (RF) performance. The inductance value is one of the main features that characterizes the performance of inductors. It is important to consider the influence of the substrate and the suspension height in calculating the inductance value accurately. In this paper, a method is proposed to calculate the inductance value of the MEMS suspended inductor wire with a silicon substrate, as the wire is the basic component of the inductor coil. Then the method is extended to the suspended inductors consisting of a single turn coil. The calculation results obtained by this proposed method were verified by finite-element analysis (HFSS) and they were found to agree well with the results of the HFSS simulation.
41
Kanidi, Maria, Niki Loura, Anna Frengkou, Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, and Costas Charitidis. "Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications." Journal of Composites Science 7, no. 2 (February 9, 2023): 74. http://dx.doi.org/10.3390/jcs7020074.
Повний текст джерелаАнотація:
In this study, the heating capacity of nanocomposite materials enhanced with magnetic nanoparticles was investigated through induction heating. Thermoplastic (TP) matrices of polypropylene (PP), thermoplastic polyurethane (TPU), polyamide (PA12), and polyetherketoneketone (PEKK) were compounded with 2.5–10 wt.% iron oxide-based magnetic nanoparticles (MNPs) using a twin-screw extrusion system. Disk-shape specimens were prepared by 3D printing and injection molding. The heating capacity was examined as a function of exposure time, frequency, and power using a radio frequency (RF) generator with a solenoid inductor coil. All nanocomposite materials presented a temperature increase proportional to the MNPs’ concentration as a function of the exposure time in the magnetic field. The nanocomposites with a higher concentration of MNPs presented a rapid increase in temperature, resulting in polymer matrix melting in most of the trials. The operational parameters of the RF generator, such as the input power and the frequency, significantly affect the heating capacity of the specimens, higher input power, and higher frequencies and promote the rapid increase in temperature for all assessed nanocomposites, enabling induced-healing and bonding/debonding on-demand applications.
42
Rushton, L. M., T. Pyragius, A. Meraki, L. Elson, and K. Jensen. "Unshielded portable optically pumped magnetometer for the remote detection of conductive objects using eddy current measurements." Review of Scientific Instruments 93, no. 12 (December 1, 2022): 125103. http://dx.doi.org/10.1063/5.0102402.
Повний текст джерелаАнотація:
Electrically conductive objects can be detected using the principle of electromagnetic induction, where a primary oscillating magnetic field induces eddy currents in the object, which in turn produce a secondary magnetic field that can be measured with a magnetometer. We have developed a portable radio-frequency optically pumped magnetometer (RF OPM) working in unshielded conditions with sub-pT/[Formula: see text] magnetic field sensitivity when used for the detection of small oscillating magnetic fields, setting a new benchmark for the sensitivity of a portable RF OPM in unshielded conditions. Using this OPM, we have detected the induced magnetic field from aluminum disks with diameters as small as 1.5 cm and with the disks being [Formula: see text] cm from both the excitation coil and the magnetometer. When used for eddy current detection, our magnetometer achieves a sensitivity of a 2–6 pT/[Formula: see text]. We have also detected a moving aluminum disk using our RF OPM and analyzed the magnetometer signals, which depend on the position of the disk, illustrating the potential of high sensitivity RF OPMs for remote sensing applications.
43
Serra, Ricardo, Mikhail L. Zheludkevich, Guido Grundmeier, and Mário G. S. Ferreira. "Modification of Organic Coatings with Thin Plasma Polymer Films. Influence on the Barrier Properties." Materials Science Forum 514-516 (May 2006): 1401–8. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.1401.
Повний текст джерелаАнотація:
Deposition of thin plasma polymer films as final layer on organic coatings can provide one promising solution to tailor the surface properties offering third functionality and increased mechanical properties. The present work is dedicated to the study of the barrier properties of polyurethane coil coatings modified by different plasma polymerization processes. Microwave (MW) and radio frequency (RF) plasmas were used to deposit thin films with different composition from various precursor mixtures. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) were used to reveal the evolution of the plasma treated coil coatings during weathering tests. Electrochemical impedance spectroscopy (EIS) was employed to study the barrier properties of the coatings. The results show a degradation effect of the plasma treatment on the barrier properties of the coil coatings especially in the case of the oxygen-containing plasmas. However addition of a fluorinecontaining component to the precursor mixture leads to the elimination of the negative effect of the plasma treatment on the barrier properties of the coil coatings. The fluorine-containing films exhibit higher weathering stability in comparison with the fluorine-free ones.
44
Samila, Andrii, Oleksandra Hotra, Oleksandr Moisiuk, Mykola Khobzei, and Taras Kazemirskiy. "Modified Transceiver Antenna for NQR Detection of Explosive Objects in Demining Conditions." Energies 15, no. 19 (October 6, 2022): 7348. http://dx.doi.org/10.3390/en15197348.
Повний текст джерелаАнотація:
This paper presents the conceptual stages of the simulation and development of a modified transceiver antenna for a high-power pulsed nuclear quadrupole resonance (NQR) detector of explosives containing the 14N isotope. At a frequency of 4.645 MHz, better characteristics are obtained using a nine-turn coil shaped as half of a Fermat spiral with an outer radius of 75 mm. Using a COMSOL Multiphysics numerical parametric simulation and a materials browser, it was possible to calculate a physical system with parameters as close to reality as possible. According to the results of the experimental studies of the radio frequency (RF) energy, the proposed antenna features an increase in the working area compared to a similar antenna, the topology of the conductive coil of which has the form of an Archimedean spiral. The resulting diagrams of the distribution of the magnetic induction also indicate that the topology of the electromagnetic (EM) field does not depend on the orientation of the sample under study relative to the axis of the radial symmetry observed in square–rectangular planar antennas.
45
Xu, Lixin, Yiyuan Li, and Jianhua Li. "Analysis of the Failure and Performance Variation Mechanism of MEMS Suspended Inductors with Auxiliary Pillars under High-g Shock." Micromachines 11, no. 11 (October 25, 2020): 957. http://dx.doi.org/10.3390/mi11110957.
Повний текст джерелаАнотація:
Microelectromechanical systems (MEMS) suspended inductors have excellent radio frequency (RF) performance and they are compatible with integrated circuit (IC). They will be shocked during manufacturing, transportation, and operation; in some applications, the shock amplitude can be as high as tens of thousands of gravitational acceleration (g, 9.8 m/s2). High-g shock will lead to the inductor deformation which affects its performance or even failure of the inductor structure. However, few studies have been carried out on the inductors under high-g shock. In this study, a kind of MEMS suspended inductor with excellent RF and mechanical performance is designed and fabricated. The failure and performance variation mechanism of the inductor under high-g shock is analyzed by measuring and comparing the performance measurement results and the π model parameters extraction results of the inductors before and after air cannon shock test. The results show that the increase of energy loss caused by substrate parasitic effect and the properties variation of the coil material affected by high-g shock are the main reasons for the decrease of RF performance parameters, and the critical stress exceeding the interlayer adhesion is the main reason for the failure of the inductor.
46
Solis-Najera, S., F. Vazquez, R. Hernandez, O. Marrufo, and A. O. Rodriguez. "Numerical Analysis of a Flexible Dual Loop Coil and its Experimental Validation for pre-Clinical Magnetic Resonance Imaging of Rodents at 7 T." Measurement Science Review 16, no. 6 (December 1, 2016): 294–99. http://dx.doi.org/10.1515/msr-2016-0037.
Повний текст джерелаАнотація:
Abstract A surface radio frequency coil was developed for small animal image acquisition in a pre-clinical magnetic resonance imaging system at 7 T. A flexible coil composed of two circular loops was developed to closely cover the object to be imaged. Electromagnetic numerical simulations were performed to evaluate its performance before the coil construction. An analytical expression of the mutual inductance for the two circular loops as a function of the separation between them was derived and used to validate the simulations. The RF coil is composed of two circular loops with a 5 cm external diameter and was tuned to 300 MHz and 50 Ohms matched. The angle between the loops was varied and the Q factor was obtained from the S11 simulations for each angle. B1 homogeneity was also evaluated using the electromagnetic simulations. The coil prototype was designed and built considering the numerical simulation results. To show the feasibility of the coil and its performance, saline-solution phantom images were acquired. A correlation of the simulations and imaging experimental results was conducted showing a concordance of 0.88 for the B1 field. The best coil performance was obtained at the 90° aperture angle. A more realistic phantom was also built using a formaldehyde-fixed rat phantom for ex vivo imaging experiments. All images showed a good image quality revealing clearly defined anatomical details of an ex vivo rat.
47
Chen, Q. S., H. Zhang, V. Prasad, C. M. Balkas, and N. K. Yushin. "Modeling of Heat Transfer and Kinetics of Physical Vapor Transport Growth of Silicon Carbide Crystals." Journal of Heat Transfer 123, no. 6 (April 9, 2001): 1098–109. http://dx.doi.org/10.1115/1.1409263.
Повний текст джерелаАнотація:
Wide-bandgap silicon carbide (SiC) substrates are needed for fabrication of electronic and optoelectronic devices and circuits that can function under high-temperature, high-power, high-frequency conditions. The bulk growth of SiC single crystal by physical vapor transport (PVT), modified Lely method involves sublimation of a SiC powder charge, mass transfer through an inert gas environment, and condensation on a seed. Temperature distribution in the growth system and growth rate profile on the crystal surface are critical to the quality and size of the grown SiC single crystal. Modeling of SiC growth is considered important for the design of efficient systems and reduction of defect density and micropipes in as-grown crystals. A comprehensive process model for SiC bulk growth has been developed that incorporates the calculations of radio frequency (RF) heating, heat and mass transfer and growth kinetics. The effects of current in the induction coil as well as that of coil position on thermal field and growth rate have been studied in detail. The growth rate has an Arrhenius-type dependence on deposition surface temperature and a linear dependence on the temperature gradient in the growth chamber.
48
Hafh Marza, Hawraa, and Thamir H. Khalaf. "The Effect of Power on Inductively Coupled Plasma Parameters." Iraqi Journal of Physics 20, no. 3 (September 1, 2022): 98–108. http://dx.doi.org/10.30723/ijp.v20i3.1017.
Повний текст джерелаАнотація:
In this work, we studied the effect of power variation on inductively coupled plasma parameters using numerical simulation. Different values were used for input power (750 W-1500 W), gas temperature 300K, gas pressure (0.02torr), 5 tourns of the copper coil and the plasma was produced at radio frequency (RF) 13.56 MHZ on the coil above the quartz chamber. For the previous purpose, a computer simulation in two dimensions axisymmetric, based on finite element method, was implemented for argon plasma. Based on the results we were able to obtain plasma with a higher density, which was represented by obtaining the plasma parameters (electron density, electric potential, total power, number density of argon ions, electron temperature, number density of excited argon atoms) where the high density in the generated plasma provides a greater degree in material processing, which increases the efficiency of the system. These results may aid in future research towards the development of more efficient optimization of plasma parameters which are (electron density, electric potential, total power, number density of argon ions, electron temperature, and number density of excited argon atoms).
49
Yu, Nan, Renaud Jourdain, Mustapha Gourma, Fangda Xu, Adam Bennett, and Fengzhou Fang. "Power Dissipation of an Inductively Coupled Plasma Torch under E Mode Dominated Regime." Micromachines 12, no. 7 (July 18, 2021): 834. http://dx.doi.org/10.3390/mi12070834.
Повний текст джерелаАнотація:
This paper focuses on the power dissipation of a plasma torch used for an optical surface fabrication process. The process utilizes an inductively coupled plasma (ICP) torch that is equipped with a De-Laval nozzle for the delivery of a highly collimated plasma jet. The plasma torch makes use of a self-igniting coil and an intermediate co-axial tube made of alumina. The torch has a distinctive thermal and electrical response compared to regular ICP torches. In this study, the results of the power dissipation investigation reveal the true efficiency of the torch and discern its electrical response. By systematically measuring the coolant parameters (temperature change and flow rate), the power dissipation is extrapolated. The radio frequency power supply is set to 800 W, E mode, throughout the research presented in this study. The analytical results of power dissipation, derived from the experiments, show that 15.4% and 33.3% are dissipated by the nozzle and coil coolant channels, respectively. The experiments also enable the determination of the thermal time constant of the plasma torch for the entire range of RF power.
50
Park, Jun Hyub, Yun Jae Kim, and Sung Hoon Choa. "Mechanical Properties of Al-3%Ti Thin Film for Reliability Analysis of RF MEMS Switch." Key Engineering Materials 306-308 (March 2006): 1319–24. http://dx.doi.org/10.4028/www.scientific.net/kem.306-308.1319.
Повний текст джерелаАнотація:
This paper presents a novel experimental method to investigate the strength of material, Al-3%Ti, which is commonly used in RF(radio frequency) microelectromechanical systems(MEMS) switch. The experimental method involves the development of a new tensile loading system. The new tensile loading system has a load cell with maximum capacity of 0.5N and a non-contact position measuring system based on the principle of capacitance micrometry with 0.1nm resolution for displacement measurement. A voice coil of audio speaker is used as the actuator of the loading system. And new specimen was designed and fabricated to easily manipulate, align and grip a thin-film for a tensile and fatigue test. The material used in this study was Al-3%Ti thin film, which was used in RF switch. The thickness and width of the thin film of specimen are 1.1µm and 480µm, respectively. The holes at center of grip end are able to make alignment and gripping easy. The bridges are to remove the side supports easily and extract specimen from wafer without sawing. Tensile tests were performed on 5 specimens. The ultimate strength of Al-3%Ti was 144MPa.