Увійти

Готові списки джерел за темами / Radiation curing / Статті в журналах

Статті в журналах з теми "Radiation curing"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Radiation curing.

Автор: Grafiati

Опубліковано: 4 червня 2021

Оновлено: 20 лютого 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Radiation curing".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Americus. "Coatings update: radiation curing." Pigment & Resin Technology 14, no. 5 (May 1985): 12–17. http://dx.doi.org/10.1108/eb042133.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Decker, Christian. "UV‐radiation curing chemistry." Pigment & Resin Technology 30, no. 5 (October 2001): 278–86. http://dx.doi.org/10.1108/03699420110404593.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Peppas, N. A. "Radiation curing of polymers." Journal of Controlled Release 7, no. 3 (September 1988): 289. http://dx.doi.org/10.1016/0168-3659(88)90067-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Dickson, Lawrence W., and Ajit Singh. "Radiation curing of epoxies." International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 31, no. 4-6 (January 1988): 587–93. http://dx.doi.org/10.1016/1359-0197(88)90231-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Läuppi, Urs V. "Radiation curing - an overview." International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 35, no. 1-3 (January 1990): 30–35. http://dx.doi.org/10.1016/1359-0197(90)90052-j.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Tabata, Yoneho. "Radiation curing in Japan." International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 35, no. 1-3 (January 1990): 36–40. http://dx.doi.org/10.1016/1359-0197(90)90053-k.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Cockburn, Eleanor, and Richard Holman. "Radiation curing: tomorrow's technology today." Journal of the Society of Dyers and Colourists 109, no. 5-6 (October 22, 2008): 179–82. http://dx.doi.org/10.1111/j.1478-4408.1993.tb01551.x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Czvikovszky, T. "Radiation curing progress in Hungary." International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 35, no. 1-3 (January 1990): 41–45. http://dx.doi.org/10.1016/1359-0197(90)90054-l.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Harris, Sid. "Radiation curing – the only way ahead?" Focus on Powder Coatings 2011, no. 7 (July 2011): 1–2. http://dx.doi.org/10.1016/s1364-5439(11)70139-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Walters, Chris. "Shedding new light on radiation curing." Metal Finishing 104, no. 3 (March 2006): 33–36. http://dx.doi.org/10.1016/s0026-0576(06)80052-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Spadaro, G., S. Alessi, C. Dispenza, M. A. Sabatino, G. Pitarresi, D. Tumino, and G. Przbytniak. "Radiation curing of carbon fibre composites." Radiation Physics and Chemistry 94 (January 2014): 14–17. http://dx.doi.org/10.1016/j.radphyschem.2013.05.052.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Rose, K., D. Vangeneugden, S. Paulussen, and U. Posset. "Radiation curing of hybrid polymer coatings." Surface Coatings International Part B: Coatings Transactions 89, no. 1 (March 2006): 41–48. http://dx.doi.org/10.1007/bf02699613.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Garnett, JL. "Radiation curing-twenty five years on." Radiation Physics and Chemistry 46, no. 4-6 (September 1995): 925–30. http://dx.doi.org/10.1016/0969-806x(95)00294-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Allen, K. W., E. S. Cockburn, R. S. Davidson, K. S. Tranter, and H. S. Zhang. "Some new developments in radiation curing." Pure and Applied Chemistry 64, no. 9 (January 1, 1992): 1225–30. http://dx.doi.org/10.1351/pac199264091225.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Johansson, Mats, Thierry Glauser, Gianluca Rospo, and Anders Hult. "Radiation curing of hyperbranched polyester resins." Journal of Applied Polymer Science 75, no. 5 (January 31, 2000): 612–18. http://dx.doi.org/10.1002/(sici)1097-4628(20000131)75:5<612::aid-app3>3.0.co;2-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Scott, Bobby R., and Jennifer Di Palma. "Sparsely Ionizing Diagnostic and Natural Background Radiations are Likely Preventing Cancer and other Genomic-Instability-Associated Diseases." Dose-Response 5, no. 3 (July 1, 2007): dose—response.0. http://dx.doi.org/10.2203/dose-response.06-002.scott.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Routine diagnostic X-rays (e.g., chest X-rays, mammograms, computed tomography scans) and routine diagnostic nuclear medicine procedures using sparsely ionizing radiation forms (e.g., beta and gamma radiations) stimulate the removal of precancerous neoplastically transformed and other genomically unstable cells from the body (medical radiation hormesis). The indicated radiation hormesis arises because radiation doses above an individual-specific stochastic threshold activate a system of cooperative protective processes that include high-fidelity DNA repair/apoptosis (presumed p53 related), an auxiliary apoptosis process (PAM process) that is presumed p53-independent, and stimulated immunity. These forms of induced protection are called adapted protection because they are associated with the radiation adaptive response. Diagnostic X-ray sources, other sources of sparsely ionizing radiation used in nuclear medicine diagnostic procedures, as well as radioisotope-labeled immunoglobulins could be used in conjunction with apoptosis-sensitizing agents (e.g., the natural phenolic compound resveratrol) in curing existing cancer via low-dose fractionated or low-dose, low-dose-rate therapy (therapeutic radiation hormesis). Evidence is provided to support the existence of both therapeutic (curing existing cancer) and medical (cancer prevention) radiation hormesis. Evidence is also provided demonstrating that exposure to environmental sparsely ionizing radiations, such as gamma rays, protect from cancer occurrence and the occurrence of other diseases via inducing adapted protection (environmental radiation hormesis).

17

Idesaki, A., M. Sugimoto, S. Tanaka, M. Narisawa, K. Okamura, and M. Itoh. "Synthesis of a minute SiC product from polyvinylsilane with radiation curing Part I Radiation curing of polyvinylsilane." Journal of Materials Science 39, no. 18 (September 2004): 5689–94. http://dx.doi.org/10.1023/b:jmsc.0000040077.94183.ac.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Bhowmick, Anil K., and V. Vijayabaskar. "Electron Beam Curing of Elastomers." Rubber Chemistry and Technology 79, no. 3 (July 1, 2006): 402–28. http://dx.doi.org/10.5254/1.3547944.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Abstract Modification of thermoplastic and rubbery materials by electron beam (EB) radiation is a potential method for development of new polymers and composites. Irradiation of polymeric materials results in grafting and subsequently formation of a three dimensional network through the union of generated macro radicals. In the Green drive, i.e. to make the world pollution free, this technology takes an important position. Curing of a number of both non-polar and polar elastomers using an electron beam was carried out in our laboratory. The effects of irradiation dose in presence and absence of radiation sensitizer on the crosslinking and structure of ethylene propylene rubber, ethylene octene copolymer, nitrile, acrylic and fluorocarbon rubbers were investigated. An analysis of crosslink to scission ratio on the basis of Charlesby-Pinner Equation was done. Mechanical and dynamic mechanical properties showed that these improved with radiation dose and sensitizer level up to certain values, beyond which the properties deteriorated due to chain scission reactions. The properties of the vulcanizates were correlated with the structure. EB cured samples were compared with the samples having conventional crosslinks. Some applications of the electron beam curing are highlighted.

19

Decker, C., T. Nguyen Thi Viet, D. Decker, and E. Weber-Koehl. "UV-radiation curing of acrylate/epoxide systems." Polymer 42, no. 13 (June 2001): 5531–41. http://dx.doi.org/10.1016/s0032-3861(01)00065-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Xu, Jianwen, and Wenfang Shi. "Progress in radiation curing marketing and technology." Journal of Coatings Technology 74, no. 5 (May 2002): 67–72. http://dx.doi.org/10.1007/bf02697985.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Decker, C., and I. Lorinczova. "UV-Radiation curing of waterborne acrylate coatings." Journal of Coatings Technology and Research 1, no. 4 (October 2004): 247–56. http://dx.doi.org/10.1007/s11998-004-0027-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

de Micheli, P. "Pigment wetting characteristics of radiation curing systems." Surface Coatings International 83, no. 9 (September 2000): 455–59. http://dx.doi.org/10.1007/bf02692757.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Boey, F. Y. C., and W. L. Lee. "Microwave radiation curing of a thermosetting composite." Journal of Materials Science Letters 9, no. 10 (October 1990): 1172–73. http://dx.doi.org/10.1007/bf00721880.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Zhang, Wei Li, Jian Jun Chen, Man Lin Tan, Bo Li, Li Qiang Ye, Dong Ju Fu, Qing Ma, Xiao Wei Wang, and Dong Shuang Li. "UV-Radiation Curing Process of Cationic Epoxy Adhesive Materials." Advanced Materials Research 983 (June 2014): 222–25. http://dx.doi.org/10.4028/www.scientific.net/amr.983.222.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The effect of photoinitiator content and species for adhesive liquid-solid conversion rate was studied. The infrared spectras of the alicyclic epoxy resin adhesives before and after the UV light curing were detected by FTIR. Thus light curing process for the alicyclic epoxy adhesive material was explored. The results showed that the UV light curing speed of Omnicat 550 was slower than that of Omnicat 650. Furthermore, the liquid-solid conversion rate was the maximum when the photoinitiator was added up to 3% with the same agent and coating thickness.

25

Nakayama, Hiroshi, Isao Kaetsu, Kumao Uchida, Manabu Oishibashi, and Yoshio Matsubara. "Intelligent biomembranes for nicotine releases by radiation curing." Radiation Physics and Chemistry 67, no. 3-4 (June 2003): 367–70. http://dx.doi.org/10.1016/s0969-806x(03)00068-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Gershoni, Gilad, Hanna Dodiuk, Reshef Tenne, and Samuel Kenig. "Cationic Polymerized Epoxy and Radiation Cured Acrylate Blend Nanocomposites Based on WS2 Nanoparticles—Part A: Curing Processes and Kinetics." Journal of Composites Science 7, no. 1 (January 16, 2023): 41. http://dx.doi.org/10.3390/jcs7010041.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Cationic photo-initiated and polymerized epoxies are characterized by good adhesion, high modulus, zero volatiles, low shrinkage and living polymerization characteristics. Radiation—cured acrylate resins are characterized by rapid initial curing with increased initial strength. The combination of radiation-cured acrylates and epoxies may present advantageous attributes. Thus, the system investigated is a hybrid epoxy/methyl acrylate and three different initiators for cationic polymerization of epoxies, the radical reaction of acrylates and the thermal initiator. When incorporating additives like opaque WS2 nanoparticles (NPs), absorption of the photo radiation takes place, which may lead to low photo activity. Curing kinetics measurements revealed that the absorbing/masking effect of WS2 was insignificant, and surprisingly, the level of curing was enhanced when the WS2 NPs were incorporated. FTIR results demonstrated that covalent bonds were formed between the inorganic fullerenes (IF-WS2) and the crosslinked matrix. Viscosity measurements showed a surprising reduction of five to ten times in the low-shear viscosity upon NPs incorporation compared to neat resins. It was concluded that the decrease of viscosity by the inorganic NPs, in addition to the enhanced level of conversion, has profound advantages for structural adhesives and 3D printing resins. To the best of our knowledge, this investigation is the first to report on a radiation-induced curing system containing opaque WS2 NPs that leads to an enhanced degree of curing and reduced shear viscosity.

27

Ranoux, Guillaume, Gabriela Tataru, and Xavier Coqueret. "Cationic Curing of Epoxy–Aromatic Matrices for Advanced Composites: The Assets of Radiation Processing." Applied Sciences 12, no. 5 (February 24, 2022): 2355. http://dx.doi.org/10.3390/app12052355.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Cross-linking polymerization of multifunctional aromatic monomers initiated by exposure to high energy radiation continues to be explored as a promising alternative to thermal curing for the production of high-performance composite materials. High-energy radiation processing offers several advantages over thermosetting technology by allowing for fast and out-of-autoclave curing operations and for its adaptability in the manufacturing of large and complex structures at reduced energy costs. The present article covers the basic aspects of radiation curing by cationic polymerization of epoxy resins, providing a status report on recent investigations conducted in our group to improve the properties of epoxy matrices and gain better control over the process for producing composites. A selection of results based on blends prepared with different composition of epoxy aromatics, transfer agents, thermoplastic toughening agents and onium salt initiators exemplifies the importance of the composition on polymerization kinetics and on the properties of resulting materials. The superiority of radiation-triggered polymerization-induced phase separation of thermoplastic additives is emphasized by the obtained morphology of toughened materials. The low initial temperature and fast curing of the reactive blends limits the expansion of phase-separated thermoplastic domains, resulting in an enhancement of the toughness.

28

Berejka, Anthony J., and Cliff Eberle. "Electron beam curing of composites in North America." Radiation Physics and Chemistry 63, no. 3-6 (March 2002): 551–56. http://dx.doi.org/10.1016/s0969-806x(01)00553-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Swanson, P. "Case Histories of Radiation Curing for Electronic Packaging." Soldering & Surface Mount Technology 8, no. 3 (December 1996): 19–24. http://dx.doi.org/10.1108/09540919610777717.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Preston, Christopher M. L., David J. T. Hill, Peter J. Pomery, Andrew K. Whittaker, and Brian J. Jensenk. "Thermal and Radiation Curing of Phenylethynyl Terminated Macromers." High Performance Polymers 11, no. 4 (December 1999): 453–65. http://dx.doi.org/10.1088/0954-0083/11/4/309.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

TAGAWA, Seiichi. "Elementary Processes and Crosslinking Reactions in Radiation Curing." Kobunshi 45, no. 11 (1996): 782–85. http://dx.doi.org/10.1295/kobunshi.45.782.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

FUSHIMI, Takao. "Application of Radiation Curing Viewed from Patent Documents." Kobunshi 45, no. 11 (1996): 794–98. http://dx.doi.org/10.1295/kobunshi.45.794.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Masson, F., C. Decker, T. Jaworek, and R. Schwalm. "UV-radiation curing of waterbased urethane–acrylate coatings." Progress in Organic Coatings 39, no. 2-4 (November 2000): 115–26. http://dx.doi.org/10.1016/s0300-9440(00)00128-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Decker, Christian, Laurent Keller, Khalid Zahouily, and Said Benfarhi. "Synthesis of nanocomposite polymers by UV-radiation curing." Polymer 46, no. 17 (August 2005): 6640–48. http://dx.doi.org/10.1016/j.polymer.2005.05.018.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Kaetsu, Isao, Hiroshi Nakayama, Kumao Uchida, and Kouichi Sutani. "Radiation curing of intelligent coating on biofunctional membranes." Radiation Physics and Chemistry 60, no. 4-5 (January 2001): 513–20. http://dx.doi.org/10.1016/s0969-806x(00)00409-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Salleh, N. G., H. J. Gläsel, and R. Mehnert. "Development of hard materials by radiation curing technology." Radiation Physics and Chemistry 63, no. 3-6 (March 2002): 475–79. http://dx.doi.org/10.1016/s0969-806x(01)00542-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Decker, C., F. Morel, and D. Decker. "UV-radiation curing of vinyl ether-based coatings." Surface Coatings International 83, no. 4 (April 2000): 173–80. http://dx.doi.org/10.1007/bf02692689.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Nablo, Sam V. "Recent developments in radiation curing in the USA." International Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry 35, no. 1-3 (January 1990): 46–51. http://dx.doi.org/10.1016/1359-0197(90)90055-m.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Ashraf, Munir, Farida Irshad, Jawairia Umar, Assad Farooq, and Mohammad Azeem Ashraf. "Development of a novel curing system for low temperature curing of resins with the aid of nanotechnology and ultraviolet radiation." RSC Advances 6, no. 84 (2016): 81069–75. http://dx.doi.org/10.1039/c6ra06591k.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In this research work, low temperature curing of crease recovery finishes was done with the help of ZnO nanoparticles as catalyst in the presence of UV radiation. The results were compared with the conventional catalyst and thermal curing system.

40

Liu, Weihua, Mouhua Wang, Zhe Xing, and Guozhong Wu. "Radiation oxidation and subsequent thermal curing of polyacrylonitrile fiber." Radiation Physics and Chemistry 94 (January 2014): 9–13. http://dx.doi.org/10.1016/j.radphyschem.2013.06.015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Xiancong, Huang, Shi Meiwu, Zhou Guotai, Zhou Hong, Hao Xiaopeng, and Zhou Chunlan. "Investigation on the electron-beam curing of vinylester resin." Radiation Physics and Chemistry 77, no. 5 (May 2008): 643–55. http://dx.doi.org/10.1016/j.radphyschem.2007.11.006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

He, Jian Yun, Yuan Yu, Ruo Yun Wang, Le Chang, Qiang Wang, Li Cheng He, and Wei Min Yang. "Research on the Micro-Injection of UV Curing." Applied Mechanics and Materials 602-605 (August 2014): 455–57. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.455.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Based on the traditional injection molding technology, micro-injection molding of UV curing experiments has been conducted. The injection molding and repeatability of the parts which have micro-structure were mainly studied. The experimental results show that: the mold-ability and repeatability of micro-structure are significantly infected by UV radiation energy and forming temperature. In order to achieve a good repeatability, it is necessary to use a sufficiently high intensity ultraviolet radiation and appropriate molding temperature during micro-injection of UV curing.

43

Zhu, Peng, and Xin Gang Zhou. "Effect of Curing Temperature on the Properties of Concrete at Early Age." Applied Mechanics and Materials 351-352 (August 2013): 1687–93. http://dx.doi.org/10.4028/www.scientific.net/amm.351-352.1687.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Under the consideration of radiation, convection, and evaporative cooling, simulating the effect of different curing temperatures (5°C,10°C,15°C,20°C,25°C,30°C) on the performance of concrete at early age. The results showed that curing temperature affected the early age performance of concrete greatly. Higher curing temperature improves the peak temperature of concrete members, and contributes to the development of the strength of concrete at early age, but elevated curing temperature will lead to higher cracking potential classification of concrete at early age.

44

Chern, B. C., T. J. Moon, and J. R. Howell. "Thermal Analysis of In-Situ Curing for Thermoset, Hoop-Wound Structures Using Infrared Heating: Part I—Predictions Assuming Independent Scattering." Journal of Heat Transfer 117, no. 3 (August 1, 1995): 674–80. http://dx.doi.org/10.1115/1.2822629.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

A curing process for unidirectional thermoset prepreg wound composite structures using infrared (IR) in-situ heating is investigated. In this method, the infrared energy is from all incident angles onto the composite structure to initiate the curing during processing. Due to the parallel geometry of filaments in wound composite structures, the radiative scattering coefficient and phase function within the structure depend strongly on both the wavelength and the angle of incidence of the IR incident radiation onto the fibers. A two-dimensional thermochemical and radiative heat transfer model for in-situ curing of thermoset, hoop-wound structures using IR heating is presented. The thermal transport properties that depend on the process state are also incorporated in the analysis. A nongray, anisotropic absorbing, emitting, and scattering unidirectional fibrous medium within a matrix of nonunity refractive index is considered. The temperatures and degrees of cure within the composite during processing are demonstrated numerically as a function of the configuration of IR heat source, nondimensional power input, mandrel winding speed, and size of wound composite. Comparison between the numerical result and experimental data is presented.

45

He, Jian Yun, Yuan Yu, Ruo Yun Wang, Xia Tang, Qiang Wang, Li Chen He, and Wei Min Yang. "Research on the UV-Curing Injection Molding." Applied Mechanics and Materials 651-653 (September 2014): 177–80. http://dx.doi.org/10.4028/www.scientific.net/amm.651-653.177.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Based on the combination of UV curing and injection molding, a new concept named "chemical manufacturing" is proposed in this paper. A cylinder with a diameter of 6mm and a height of 10mm was used as the molding sample;A single factor analysis was used to determine the effects of the intensity of ultraviolet, the duration of ultraviolet irradiation and the distance between UVLED device and product surface on the formability of UV-curing injection molding. The experimental results showed that the intensity of UV radiation, the UV irradiation duration and the distance between UVLED device and product surface have a significant effect on the UV-curing molding of the product. With the increase of ultraviolet radiation intensity and UV irradiation duration, the forming quality of the products increases, while with the increase of the distance between UVLED device and product surface the forming quality of products declines.

46

Nakayama, Hiroshi, Isao Kaetsu, Kumao Uchida, Jyunya Okuda, Toshiaki Kitami, and Yoshio Matsubara. "Preparation of temperature responsive fragrance release membranes by UV curing." Radiation Physics and Chemistry 67, no. 2 (June 2003): 131–36. http://dx.doi.org/10.1016/s0969-806x(03)00005-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Pappas, S. Peter. "UV curing by radical, cationic and concurrent radical-cationic polymerization." Radiation Physics and Chemistry (1977) 25, no. 4-6 (January 1985): 633–41. http://dx.doi.org/10.1016/0146-5724(85)90143-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Knolle, W., and R. Mehnert. "On the mechanism of the electron-initiated curing of acrylates." Radiation Physics and Chemistry 46, no. 4-6 (September 1995): 963–74. http://dx.doi.org/10.1016/0969-806x(95)00302-e.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Dodd, K. J., C. M. Carr, and K. Byrne. "Ultraviolet Radiation Curing Treatments for Shrink-Resistant Wool Fabric." Textile Research Journal 68, no. 1 (January 1998): 10–16. http://dx.doi.org/10.1177/004051759806800102.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Decker, C. "New developments in UV radiation curing of protective coatings." Surface Coatings International Part B: Coatings Transactions 88, no. 1 (March 2005): 9–17. http://dx.doi.org/10.1007/bf02699702.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.