Дисертації з теми "Protoype"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Protoype".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ozier, Owen W. (Owen Whitfield) 1979. "Variable viewpoint reality : a protoype for realtime 3D reconstruction." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80232.
Повний текст джерелаFerm, Kristina. "Developing Android application protoype for internal social networks for companies." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-104810.
Повний текст джерелаChambord, Sylvain. "Haute résolution spectrale dans l'ultra-violet lointain : simulation et évaluation expérimentale d'un spectrographe protoype pour l'instrument spatial "FUSE"." Aix-Marseille 3, 1995. http://www.theses.fr/1995AIX30033.
Повний текст джерелаLinåker, Fredrik. "Prototype Extraction and Learning Using Prototypes in an Artificial Neural Network." Thesis, University of Skövde, Department of Computer Science, 1997. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-294.
Повний текст джерелаA prototype is a general description which depicts what an entire set of exemplars, belonging to a certain category, looks like. We investigate how prototypes, in the form of mathematical averages of a category's exemplar vectors, can be represented, extracted, accessed, and used for learning in an Artificial Neural Network (ANN). From the method by which an ANN classifies exemplars into categories, we conclude that prototype access (the production of an extracted prototype) can be performed using a very simple architecture. We go on to show how the architecture can be used for prototype extraction by simply exploiting how the back-propagation learning rule handles one-to-many mappings. We note that no extensions to the classification training sets are needed as long as they conform to certain restrictions. We then go on to show how the extracted prototypes can be used for the learning of new categories which are compositions of existing categories and we show how this can lead to reduced training sets and ultimately reduced learning times. A number of restrictions are noted which have to be considered in order for this to work. For example, the exemplar representations must be systematic and the categories linearly separable. The results, and other properties of our network, are compared with other architectures which also use some kind of prototype concept. Our conclusion is that prototype extraction and learning using prototypes is possible using a simple ANN architecture. Finally, we relate our system to the symbol grounding problem and point out some directions for future work.
Næss, Åshild. "Prototypical transitivity /." Amsterdam [u.a.] : Benjamins, 2007. http://www.loc.gov/catdir/toc/ecip0717/2007018295.html.
Повний текст джерелаAbdulhadi, Sami. "ARM i inbyggt system - med prototyp." Thesis, Karlstad University, Faculty of Technology and Science, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-4612.
Повний текст джерелаInbyggda system blir allt vanligare i dagens samhälle. De inbyggda systemen finns i nästan allt nuförtiden, från diverse fordon till leksaker för barn.
Dagens teknik innebär bland annat att gårdagens lösningar kan realiseras på en bråkdel av den tidigare ytan. Allt mer blir ytmonterat med mindre och mer komplexa kretsar. Detta är inte alltid till utvecklarnas fördel då montering av prototypkort blir en svår och/eller dyr process.
Målet är att ta fram ett inbyggt system med en ARM-processor. Systemet ska innehålla USB-OTG, ethernet, minne av olika slag som FRAM och microSD samt en display med pekskärm för användargränssnitt. Projektet omfattar allt från komponentval till test och verifiering med programkod.
Tiden räckte inte till för att få med alla delar som planerats. Resultatet av projektet blev ett prototypkort och två små programsekvenser, en som blinkar två lysdioder på kortet och en som skriver ut en bild på displayen.
Detta inbyggda system är i första hand till för utvärdering av ARM-processorer för Mikrodidakt AB.
Embedded systems has become more and more common in today's society. The embedded systems are included in almost everything today, from various vehicles to children's toys.
Today's technology means that yesterday's solutions can be realised on a fraction of the area. More and more become surface mounted with smaller and more complex circuits. This is not always an advantage for the developers when assembling and soldering prototype circuit boards become a more difficult and/or an expensive process.
The goal is to create an embedded system with an ARM-processor. The system will consist of USB-OTG, ethernet, various memory like FRAM and microSD and a display with touchscreen for user interface. The project includes everything from choice of components to test and verification with program code.
The time was too short to include all the parts that was planned. The result of the project was a prototype card and two small program sequences, one that blinks the two light diodes on the card and one that writes a picture on the display.
This embedded system is intended for evaluating ARM-processors by Mikrododakt AB.
Bäckman, Sandra. "Produktutvecklingsprojekt: En applikation till användandet av oxygenbehandling i hemmet." Thesis, Högskolan i Halmstad, Biomekanik och biomedicin, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-23049.
Повний текст джерелаAccording to statistics, in 2010 there were 26 individuals seen by a group of 100,000 who were depending in home oxygen therapy (HOT). Oxygen treatment adds a certain amount of Oxygen to the patient because the ability to breathe correctly and sufficiently is negatively affected. The dominant disease that leads to HOT is COPD, chronic obstructive pulmonary disease. As the name suggests, it is a chronic disease which gives inflammatory changes to the lung bronchioles. These changes affect the breathing surface which results in that the individuals’ respiratory capacity becomes reduced. The project used methods from dynamic product development with the user in focus. This to obtain a functional prototype that could be used by the target group and to fulfill the purpose, goals and requirements set for the project's results. An important component of the project therefore was to work with the collection of data. For this, various methods were used to obtain information from users as well as prescribers of HOT. All of the methods used have been tested earlier and proven reliable. This project collected information from interviews, observations, matrix arrays, risk analysis and usability testing in patients with HOT. The prototype developed in the project resulted in that the target group could perform live test without any risks during testing. The results showed that the aim and objective for the project were fulfilled, expressed in that patients would be able to move the oxygen tube used in HOT. It was further concluded that the results fulfilled the patients' desire and opportunity to move the Oxygen tube in their home and at the same time answered the questions that the project was to answer. There were no existing solutions to the problem which is included in the project, but it was possible to develop a first prototype that met the purpose and object of the project.
Johansson, Jimmy. "Utformning av en Bollutslungare : Produktutvecklingsprojekt av en bollutslungare för hundsporten Flyball." Thesis, Karlstads universitet, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-44441.
Повний текст джерелаDenna rapport behandlar ett produktutvecklingsprojekt av en bollutslungare på uppdrag av SörmonsHundklubb LKk. Projektet utfördes som ett examensarbete för högskoleingenjörsprogrammet iinnovationsteknik och design på Karlstads universitet.Uppdragsgivaren önskade börja med en hundsport som heter Flyball. Sporten kan liknas vid stafettdär två lag med hundar tävlar mot varandra. En hund per lag springer längst en bana över någrahinder fram till en bollutslungare. När hunden hoppar på bollutslungarens framsida för att vändakastas en boll ut en dryg halvmeter för att fångas av hunden. Hunden återvänder då längst banan föratt byta av med nästa hund i laget. Sista hund först i mål vinner för sitt lag.Då bollutslungaren var dyr att importera och inte fanns tillgänglig i Sverige önskade uppdragsgivarenatt en svensk version skulle utvecklas. Målsättningen var att minimera pris med kriteriet attmaximera livslängd.Arbetet följde produktutvecklingsprocessen såsom den studerats på Karlstads universitet med storinflytelse av idégenerering, analog och digital skissteknik, 3D-modellering och ritningsskapande.Konstruktion av funktionsmodell utfördes på verkstaden på Karlstads universitet med evolutionistiskutveckling av designen. En kombination av lateralt tänkade för kreativitet och vertikalt tänkade förlogik och bekräftelser användes genom projektet.Resultatet av projektet utmynnade i en funktionsmodell som kunde testas i verklig miljö påhundklubben och bekräfta att konceptet fungerade enligt önskemål. På grund av tillgängligt materialkunde konstruktionen av funktionsmodellen utföras utan kostnad för uppdragsgivaren vilket var ettönskemål, dock inte ett krav, för projektet.Uppdragsgivaren önskade behålla funktionsmodellen som skapades för att använda inom klubben förträning av Flyball. Därmed färdigställdes funktionsmodellen till funktionsredo efter projektets slutoch levererades till uppdragsgivaren.
Dahlin, Sanna, and Henrik Fagerlund. "Mechanical Mirror." Thesis, KTH, Mekatronik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-296234.
Повний текст джерелаDetta kanidatexamensarbete har syftet att presentera en översikt av de steg som genomfördes för att konstruera och programmera en prototyp av en mekanisk spegel. Idén med en mekanisk spegel är att en kamera läser in en bild som sedan är översatt till pixlar med olika värden på ljusstyrka. Dessa ljusstyrkor visas sedan av metallplattor, vilka agerar som pixlar, som roterar till olika vinklar för att reflektera motsvarande ljus från en lampa. Pixlarna formar tillsammans gråskalebilder baserat på de bilder som kameran läser in. En prototyp konstruerades framgångsrikt. Test visade att dess syfte att röra sig i enlighet med den inlästa bilden uppfylldes, dock finns plats för justeringar för att ljuset från lampan ska nå pixlarna i större utsträckning. Pixlarnas vinkelomfång visade sig bli mellan 32°och 44°, vilket konstaterades vara tillräckligt för deras syfte. Skillnaden i vinkelomfång mellan pixlarna berodde på mindre konstruktionsfel och påverkade inte spegelns funktionalitet. Spegelns uppdateringsfrekvens, vilket kan beskrivas som frekvensen med vilken pixlarna roterar och formar en bild, sattes till 25 bilder per sekund. Detta tillät spegeln att härma rörelser framför den utan stor fördröjning utan att överstiga kamerans bildhastighet, som läser in med en bildhastighet på 30 bilder per sekund. Kameran var således den begränsade faktorn för pixlarnas uppdateringsfrekvens.
Jacob, Allan, and Jannis Papadopoulos. "Design and Development of a Canine behaviour analysis device." Thesis, KTH, Maskinkonstruktion (Inst.), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-226162.
Повний текст джерелаThis thesis is a project where the aim was to develop a beta prototype for a behaviour analysis device for dogs. The device uses motion tracking sensors to analyse and predict its behaviour. The thesis project started with understanding the customer segment and defining the design direction on that basis. This was then followed by concept generation, realisation and evaluation. This included traditional design methodologies and design procedures where the designs were evaluated and modelled. This was a highly iterative design process which was followed by FEA and Moldflow analyses. Prototypes were made at the KTH prototyping centre, where various versions were made in FDM printers and validated. The beta prototype was later produced using SLA printers and validated for waterproofing. Drop test was simulated with Ansys to determine the amount of deformation in the device when dropped, the results point out that the device is well within an acceptable deformation range. The Moldflow analyses highlighted aspects of the design that required further modifications to improve the manufacturability of the device.
Birgestam, Magnus. "Controlling a Robot Hand in Simulation and Reality." Thesis, Linköping University, Department of Management and Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-11393.
Повний текст джерелаThis master thesis was made at the Institute of Technology Stockholm and is a part of a robot hand project called 10-X with the aim to develop a low-cost robot hand that is light and strong.
The project specification is to further improve the ability to control the robot hand in a user friendly way. This has been done by implementing a controller, earlier used and developed at KTH, which is intuitive and easy to customize after the needs in different kinds of grasps. To make the controller easy to use an user interface has been made.
Before the implementation of the controller was made on the real hand it was tested and development on a simulation created in MATLAB/simulink with help from a graphic physics engine called GraspIt! The movement of the robot finger is effected of the force from a leaf spring and a tendon that bends the finger. Also the finger is exposed of contact forces and all these components had to be modeled in the simulation to make the finger act properly.
Detta examensarbete är genomfört på KTH Stockholm och är en del av ett projekt, kallat 10-X, vars syfte är att utveckla och ta fram en robothand som är lätt och stark samtidigt som den är billig.
Projektets målsättning är att vidare förbättra och utveckla möjligheten att kontrollera robothanden på ett användarvänligt sätt. Detta har gjorts genom att implementera en regulator, tidigare utvecklad och använd på KTH, som är instruktiv och lätt att anpassa efter olika typer av grepp. För att göra regulatorn enkel att använda har ett användargränssnitt skapats.
Innan regulatorn implementerades på den riktiga robothanden utvecklades och testades den på en simuleringsmodell, skapad i MATLAB/simulink med hjälp av en grafisk fysikmotor GraspIt! Rörelsen hos ett robotfinger påverkas av krafter från en bladfjäder och den lina som böjer fingret. Fingret utsätts också för kontaktkrafter och alla dessa komponenter blev modellerade i simulatorn för att få fingret att bete sig korrekt.
Kuyumcuoglu, Gabriel, and Sebastian Lagerström. "Utveckling av testmaskin för teknik i skor." Thesis, KTH, Maskinkonstruktion (Inst.), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-191499.
Повний текст джерелаRECCO is a company that develops rescue system for avalanche accidents. The system works by a RFID tag (reflector) and a detector. The detector senses the reflector that is attached to jackets, helmets, shoes and ski boots up to 200 meters or 30 meters through the snow. The detector is used by experienced avalanche rescue groups. RECCO will implement reflectors in hiking shoes to search for people who are in the woods and in the mountains. The purpose of this master theses is to develop a shoe test machine to be able to test the service life of the reflector. The background study was performed by an information search about the biomechanics of the leg and foot, different leg movements that may affect the shoe, different types of hiking shoes and several shoe test machines available on the market today. The implementation of the project began with a test to examine how large the forces are on the reflector acting in the shoe. The test was conducted by a pressure sensitive sensor connected to an Arduino UNO. The maximum force on the reflector was 7.1 N. This was followed by a brainstorming session that resulting in seven different concepts. The concepts were then evaluated against each other using a PUGH matrix, which resulted in a concept for further development. The analysis was conducted using SolidWorks, Matlab, and ADAMS. Detailed drawings and assembly of the model were made using SolidWorks. The calculations were made on bearing housings, plain bearings, linear ball bearing and the motor using Matlab. ADAMS was used to simulate the movement and to verify the Matlab calculations. The result of the final concept was succeeded. The machine's movement and the influencing forces on the reflector mimic the performed test that was made at the beginning of the project. Improvements that can be done is to change to a more powerful motor to achieve a more constant speed or a flywheel to reduce the strain on the motor. For further work RECCO can program a switch that turns off the motor when the number of cycles are achieved.
Abrahamsson, Linn, and Wenström Peter Melin. "Användning av prototyper som verktyg för kravhantering i agil mjukvaruutveckling : - En fallstudie." Thesis, Linköpings universitet, Programvara och system, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-150528.
Повний текст джерелаRequirements Engineering (RE) in Agile Software Development (ASD) is a challenge thatmany face and several techniques exist when doing so. One such technique is prototyping, when a model of a product is used to gather important information in software develop-ment. To describe how much a prototype resembles the product the notion of fidelity is used. The aim of this study is to contribute to research regarding prototyping in ASD,and to examine the effect of a prototype’s fidelity when using prototypes in discussionsduring RE. A case study is performed at the company Exsitec where staff are interviewedregarding prototyping in software development. Thereafter, two prototypes of low andhigh fidelity are developed and used in interviews as a basis for discussion. Based on thisstudy, the use of prototypes in software projects can help customers trust the process,improve communication with customers, and facilitate when trying to reach consensusamong different stakeholders. Furthermore, depending on how they are used, prototypescan contribute to understanding the big picture of the requirements and can also serve asdocumentation. The study also shows some, albeit subtle, differences in the informationcollected using prototypes with low and high fidelity. The use of a high fidelity prototypeseems to generate more requirements, but makes interviewees less likely to come up withlarger, more comprehensive requirement changes.
Džonlaga, Bogdan. "Contribution to the sizing of the modular multilevel converter." Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS297/document.
Повний текст джерелаThe modular multilevel converter is a suitable solution for HVDC grids thanks to its modularity, low switching frequency and quasi-sinusoidal AC voltage. However, due to its topology, its mathematical model is quite complex and is therefore often simplified at the design stage. In particular, the arm equivalent resistance R, the arm inductance L and the circulating current are often neglected. But experimental results obtained with our 1-ph 6-level full-bridge MMC prototype showed that these hypotheses are not always acceptable. In this context, the goal of this thesis is to study the impact of accounting for R, L and the circulating current on the module capacitor voltage and on the operating area of the converter. First, we extended the commonly used integral based model and we clarified the hypotheses behind it. Among others, expressions for the circulating and dc currents have been developed and compared with the one that can be found in the literature. It allowed us to analyze the module capacitor voltage ripple as a function of R and L, without circulating current only. Second, to overcome the limitations of the integral based model, we proposed to use a steady state time invariant (DeltaSiga) MMC model in dq0 frame. Only few hypotheses are required to obtain this model, but a numerical evaluation is required. It allowed us to analyze the module capacitor average voltage and the module capacitor voltage ripple as a function of R and L, with and without circulating current. Third, using the steady state time invariant model, we developed a detailed PQ diagram of the MMC. In addition to the conventional AC current limit, DC current limit and modulation index limit, we added several internal limits: IGBT current, arm rms current and module capacitor voltage and current ripple. The results have been confirmed by numerical simulation using a detailed Matlab Simulink SimPowerSystems model. The results presented in this thesis could be used to optimize the sizing of the components of the MMC considering its operating area, and to assess the impact of different parameters on the MMC performance
Johansson, Carl, and Soren Kavosi. "Automating Interactions with Web Services : NFC based attendance software in Java." Thesis, KTH, Radio Systems Laboratory (RS Lab), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168381.
Повний текст джерелаI dagsläget använder vi en föråldrad metod för att hantera information kring vilken student och/eller instruktör som närvarar vid vilken föreläsning/laboration/seminarie, närvaron skrivs ner på en bit papper som samlas ihop och skickas till en administratör som sedan manuellt får mata in den här informationen i de olika databehandlingssystemen. Denna metod är långtifrån optimal och kräver en massa tid och resurser från administratörer, lärare och elever. Att den insamlade informationen är korrekt är viktig eftersom den är ett krav vid vissa kurser. Vårt förslag är att insamlingen av närvaroinformation automatiseras, genom att studenter och lärare enkelt kan dra sina KTH access kort för att mata in sitt namn på en närvarolista. Detta kommer att genomföras genom utvecklandet av en applikation som lägger till en student i närvarolistan genom att läsa av kort genom en NFC/RFID läsare och mappning av kortens UID till ett KTH användarnamn (användarnamnet är unikt inom KTH) med hjälp av en databas. Närvarolistan som genereras som ett resultat av programmets körning skall vara formaterad på ett sådant sätt att den enkelt kan laddas upp till system som KTH Social och Daisy. Idealt skall applikationen vidareutvecklas så att instruktörer/lärare kan använda närvarolistan till att automatiskt lägga till rätt post i de systemen för att lagra information om studentens närvaro vid en viss aktivitet - med mål att undvika mycket manuell inmatning samt öka noggrannheten kring processen. Ett ytterligare problem är att det i nuläget inte finns något system som kopplar KTH:s databas för accesskort (BRAVIDA) till KTH LDAP databasen (som lagrar information om KTH studenter, fakultet och personal). Detta betyder att varje användares accesskorts UID måste läggas till i en databas manuellt tillsammans med studentens KTH användarnamn. Emellertid är det så att när posten väl är inlagd i databasen, så kan vi mappa mellan accesskorts UID till KTHID(eller motsatsen). Detta examensarbete har resulterat i en fungerande prototyp av en applikation som skapar närvarolistor genom att läsa av data från studenter och lärares accesskort med hjälp av en NFC läsare. Detta kommer förhoppningsvis att stimulera ökad digitalisering inom KTH och dessutom motivera fler kursansvariga att använda accesskortsbaserade listor. Resultatet bör förhoppningsvis bli mindre manuellt arbete för studenter, fakultet och övrig personal samt mera precis och snabbare insamling av närvaroinformation.
Svenn, Larsson Grund Erik, and Simon Norberg. "Prototyputveckling – Isotimber väggblock." Thesis, Mittuniversitetet, Avdelningen för ekoteknik och hållbart byggande, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-31526.
Повний текст джерелаBuilding with wood has a strong historical anchorage in Sweden. Just over a century ago, a ban was imposed on building houses on more than two floors of wood due to the perceived fire risk caused by the material. At Sweden's accession to the EU in 1994, the old decision was removed and the trend in the construction of wooden houses for multi-family houses has subsequently increased dramatically. The development has resulted in a more modern way of building, from building everything on the construction site to the assembly of prefabricated wall modules. With this approach, construction has been able to ensure a higher quality and efficiency. A company that works with prefabricated wall blocks is Isotimber. Their wall blocks are unique in that they contain only wood, in order to achieve a higher insulation value, the raw material wood has been combined with milled gaps of air. Isotimber has had the desire to develop its product because the screwed cassettes that forms a uniform wall block, separates during the lifts. The lifting points have been placed through drilled holes in the wall blocks with inserted lifting straps, an approach that Isotimber wishes to change. The transverse forces that have occurred during the lift have acted diagonally against the wall blocks and the number of lifting points has varied. The study has been aimed at developing the existing wall block and to study whether lifting could be done in a different way than today. The position of the lifting points has also been examined. The result of product development has led to a laminated wooden beam being placed above the blocks. This has meant that lifting points have been moved to the laminated wooden beam where perforation for the straps will be executed. The number of lifting points has become dependent on the width of the wall blocks, and the transverse forces that arise during lifting must be vertical to the wall blocks. The result of the new wall-block prototype has led to dimensioning of the laminated wooden beam at the lifting points, as well as the connections between the wall block and the laminated wooden beam. The wall block changes have contributed to a smoother mounting system. The laminated wooden beam can also be considered to give a smaller deflection in the wall block. The lifting points have become more at fixed range intervals to counter the separations between the screwed cassettes in the wall blocks.
Betyg 170707, H14.
Rivière, Jean-Michel. "Contribution à la définition d'un modèle de référence de capteur intelligent : application à un capteur intelligent de température." Nancy 1, 1995. http://www.theses.fr/1995NAN10023.
Повний текст джерелаDušek, Přemysl. "Aplikace laseru při obrábění dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230854.
Повний текст джерелаGannholm, Lovisa. "A Comparative Evaluation Between Two Design Solutions for an Information Dashboard." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-102134.
Повний текст джерелаLackey, Pete. "Prototype transformation." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/68327.
Повний текст джерелаAndersson, Andreas. "Spirometri med en smarttelefon : Utveckling av en app för att mäta rotationshastigheten till en spirometerprototyp för smarttelefoner." Thesis, KTH, Data- och elektroteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-223355.
Повний текст джерелаThe goal with this bachelor thesis was to develop an application with an algorithm to measure the rotation speed of a prototype, as a low-cost solution for measuring spirometry with a smartphone. In a pilot study it was investigated how a smartphone can be used to measure health and what algorithms there are to detect motion in videos. After the pilot study an app with the function to record a video by using the camera of a smartphone and then use an algorithm to detect the rotation speed in the spirometry-prototype’s turbine was developed. To make it work it is important that the rotation speed is low enough so it does not exceed half of the cameras fps. Therefore, to capture the rotation speed of the spirometry-prototype’s turbine the rotation needs to be limited and a smartphone with a camera with at least 120 fps is required.The result of this work is an algorithm that can measure the rotation speed in the spirometry prototype turbine. The algorithm is detecting the peaks in a PPG. To minimize the computation time and to increase the accuracy the algorithm analyses the colour intensity over a ROI in every frame. There is great potential to use this algorithm to further develop this alternative method of measuring spirometry.
Holter, Tammy D. "Development of a prototype for the integration of scheduling and control in manufacturing using artificial intelligence techniques." Ohio : Ohio University, 1994. http://www.ohiolink.edu/etd/view.cgi?ohiou1177099834.
Повний текст джерелаFu, Yi, and Ruimin Li. "From Set Top Box to Home Media Center." Thesis, KTH, Radio Systems Laboratory (RS Lab), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-153655.
Повний текст джерелаAven digitalboxar är spridda i dag för att ansluta en mediakälla till en bildskärm (traditionellt en TV) är marknaden förändras på grund av införandet av Internet Protocol Television, Over-the-Top streaming anordningar, spelkonsol, hem teater Personal Computer, smarta TV osv. Det finns en framväxande begreppet Home Media Center (HMC). Detta HMC ger konsumenterna ett integrerat hem mediemiljö och erfarenhet. Denna avhandling utforskar övergången från digitalboxar till HMC. De specifika frågor som detta examensarbete skall besvara är: Vad kommer en framtida HMC se ut? Hur kommer dess funktioner att bli? Vilka gränssnitt och protokoll kommer den att använda? Vem kommer att göra dessa HMC? Hur kan digitalboxar leverantörer utvecklas vara HMC säljare eller kommer de helt enkelt att upphöra att existera? Detta examensarbete designar och utvärderar en hypotetisk HMC prototyp baserad på nuvarande tekniktrender som användarnas förväntningar studie. Denna prototyp användes med 68 frivilliga att identifiera och prioritera de viktigaste funktionerna som en HMC bör ge. Baserat på de viktigaste av dessa funktioner en konceptuell HMC prototyp kommer att utformas för att definiera en HMC produkt färdplan för en, 3 och 5 år. Färdplanen kommer att användas för att projicera de ekonomiska konsekvenserna av HMC på den aktuella digitalboxar industrin. Denna ekonomiska analysen kommer att överväga Sverige som målgrupp. Denna avhandling kan användas av nuvarande digitalboxar leverantörer för att definiera sina egna företagsspecifika färdplaner för att stödja övergången till den framtida HMC marknaden.
Escallier, Didier. "Contrôle des échanges d'énergies active et réactive entre réseau et convertisseurs à M. L. I. : étude théorique et réalisation pratique." Vandoeuvre-les##-Nancy, INPL, 1992. http://www.theses.fr/1992INPL011N.
Повний текст джерелаPěnčík, Jan. "Návrh prototypu mobilní aplikace pro studenty FM VŠE." Master's thesis, Vysoká škola ekonomická v Praze, 2016. http://www.nusl.cz/ntk/nusl-262254.
Повний текст джерелаSekerka, Vít. "Výroba dílů technologií DMLS a jejich porovnání s jinými konvenčními technologiemi z hlediska ekonomické náročnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229969.
Повний текст джерелаPatterson, Lachlan Joel. "A prototype goal oriented construction prototype management application for owners." Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51894.
Повний текст джерелаWidmer, Leo. "TrucStudio a prototype /." Zürich : ETH, Eidgenössische Technische Hochschule Zürich, Department of Computer Science, 2007. http://e-collection.ethbib.ethz.ch/show?type=dipl&nr=329.
Повний текст джерелаWåhlstedt, Carl-Adam. "Mini Rollout Prototype." Thesis, KTH, Reglerteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-104614.
Повний текст джерела何存德 and Chuen-tak Douglas Ho. "Trauma Centre Prototype." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1999. http://hub.hku.hk/bib/B31984575.
Повний текст джерелаWong, Shiu-tao Stephen, and 黃紹滔. "Secondary school prototype." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31985531.
Повний текст джерелаGonzaÌlez, RodriÌguez IneÌs. "Automated prototype induction." Thesis, University of Bristol, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251139.
Повний текст джерелаHo, Chuen-tak Douglas. "Trauma Centre Prototype." Hong Kong : University of Hong Kong, 1999. http://sunzi.lib.hku.hk/hkuto/record.jsp?B25947813.
Повний текст джерелаWong, Shiu-tao Stephen. "Secondary school prototype." Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B25947953.
Повний текст джерелаWang, Guojun. "Optimizing System Level Testing of Evolved Packet Gateway." Thesis, KTH, Kommunikationssystem, CoS, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-122265.
Повний текст джерелаMålet med detta examensarbete är att förbättra effektiviteten inom industriell systemtestning. Avhandlingen är främst inriktad på området för telekommunikation. Testning är ett av de viktigaste stegen innan försäljning av en produkt till kunder och testning är också en viktig komponent under underhållsfasen. Genom att förbättra effektiviteten i testerna kan arbetsbelastningen för testare minskas och flera projekt genomföras parallellt. Examensarbetet har utförts inom Ericssons produktutvecklingsenhet (PDU) Packet Core, avdelning System Test. Avhandlingens mål är att effektivisera systemtestning av Evolved Packet Gateway (EPG), eftersom systemtest gradvis blivit flaskhalsen för hela produktens release. Ericsson vill påskynda takten som de släpper nya produkter på marknaden och ny mjukvara till sina kunder. En första undersökning gjordes för att få en tydlig bild av hur systemtest utförs för närvarande och därefter, gjordes en analys baserat på denna information. Idéer samlades in för att föreslå en ny implementering och slutligen utvecklades en prototyp av en specifik idé och den harutvärderats för att visa hur effektiviteten hos systemtest kan förbättras. Slutligen, var dessa idéer visade sig vara värdefullt för Ericsson PDU Packet Core System Test avsnitt och två av dem har antagits och håller redan på att utveckla.
Žáček, Jan. "Pilotní zavádění DMS v bankovním prostředí." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-202082.
Повний текст джерелаRubil, Dino. "En manualapplikation : Utvecklingen av en mobilapplikation." Thesis, Södertörns högskola, Institutionen för naturvetenskap, miljö och teknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-24030.
Повний текст джерелаPettersson, Milou. "Stolskoppling." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32134.
Повний текст джерелаArbetet har utförts som ett produktutvecklingsprojekt åt möbelföretaget Mitab. Företaget ligger i Tranås och jobbar huvudsakligen med möbeldesign och inredningsprodukter för offentlig miljö. Uppdraget har varit att ta fram ett lösningsförslag på en stolskoppling till en befintlig stolsmodell i företagets sortiment. Arbetets omfattning har innefattat framställning av en produkt från idé till ett färdigt förslag. Målet med examensarbetet var att ta fram ritningar och bilder på en fungerande produktidé som kopplar samman RAL-stolar. Vid projektstart delgav företaget ett behov av att kunna sammanfoga en specifik stolsmodell i sidled. Utifrån detta behov genererades frågeställningar och en produktutvecklingsprocess genomfördes för att slutligen resultera i en produktionsvänlig produkt. Inspiration och kunskap har inhämtats genom att studera litteratur, observation av produktutveckling på företaget samt besök på möbelmässan i Älvsjö. Intervjuer och tester användes för att samla in information om problemet. Flera koncept har utvecklats och utvärderats tillsammans med företaget. Att kombinera funktion med en formgivning som är kompatibel med stolens design samt en enkel och tydlig design har varit ett syfte med detta projekt. Resultatet är en koppling som är dold under stolsitsen och är enkel att använda. Resultatet blev ett koncept för att länka stolar tillsammans. Kopplingen är dold under stolsitsen när den inte används. Plast och stål valdes som material och en prototyp tillverkades som visar formen och funktionen av det utvecklade konceptet. De resulterande ritningarna har medfört att en prototyp har kunnat tas fram. Prototypen uppfyller de krav som Mitab har lagt fram vid examensarbetets projektstart. En kostnadsuppskattning baserad på konceptunderlag redovisas och den sammanlagda tillverkningskostnaden för stolskopplingen ligger långt under företagets kostnadskrav. Arbete som kvarstår är att testa prototypen och vidare undersöka material för att kunna utvärdera hållbarheten i produkten och eventuella belastningskrav. Mer detaljerade kostnadsberäkningar bör genomföras för att få fram en mer exakt prisbild.
Roth, Adam, and Daniel Sandberg. "Det smarta köket för ett hållbart samhälle : MatKlok - En applikation för att förenkla vardagen och reducera matslöseri." Thesis, Blekinge Tekniska Högskola, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16459.
Повний текст джерелаThis Bachelor Thesis will examine how to design a smart appliance in the kitchen to help reduce food waste. We go into the survey with the question "How can a smart application in the kitchen make the living day more enjoyable and easier, as well as contribute to a reduced food waste?". We research in food waste, smart homes, smart refrigerators and QR codes. Based on this research, we design a prototype for a smart kitchen in the form of a mobile application. We form our own perception of the concept of the smart kitchen. There will be a review of how we shape our solution to the question and the methods used to arrive at the final result.
Byström, Albin, and Niklas Lindqvist. "Rapporteringstjänst för operatör och förare." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232138.
Повний текст джерелаThe Swedish rail network constitutes an important part of its infrastructure and transports both people and large quantities of goods. Unfortunately, the rail network is susceptible to disruptions since a large amount of the rail network consists of one-track sections. Trains that traffic these sections are dependent on each other. One delay may result in subsequent delays for other trains. The follow-up of causes of delays is today done manually and often weeks after it occurred which may results in uncertain and unreliable data. The goal of the project is to develop a prototype of a reporting system which could be implemented into the Swedish railway network to enable real time monitoring of delays that occurs. The prototype should notify the user when a new delay has occurred. The result of the project was a prototype which in real time detects delays and notifies the affected users that a delay has occurred, at which station it happened and the extent of the delay is presented in minutes. The user then has an opportunity to report cause of delay. The prototype also detects subsequent delays.
Novotný, Tomáš. "Využití technologie virtuální reality v analýze rizik a bezpečnosti výrobních strojů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-234169.
Повний текст джерелаWalldén, Marcus, and Aylin Özkan. "A graph database management system for a logistics-related service." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-205184.
Повний текст джерелаHögre krav på databassystem har lett till en ökad popularitet för vissa databassystemstyper i några nischområden. Ett sådant nischområde är grafnätverk, såsomsociala nätverk eller logistiknätverk. Analyser på grafnätverk fokuserar ofta påkomplexa relationsmönster som ibland inte kan lösas effektivt av traditionella relationsdatabassystem, vilket har lett till att vissa specialiserade icke-relationella databassystem har blivit populära alternativ. Många av de populära databassystemen inom detta område är grafdatabassystem. Detta arbete presenterar en prototyp av en logistiknätverksrelaterad tjänst som använder sig av ett grafdatabashanteringssystem som heter Neo4j, vilket är det mest använda grafdatabashanteringssystemet. Logistiknätverket som täcks av tjänsten är baserad på existerande data från PostNord, Sveriges ledande leverantör av logistiklösningar, och fokuserar primärt på kundsupport och företagsrelaterad analys. Genom att skapa en prototyp av tjänsten strävar detta arbete efter att uppvisa vissa av de positiva och negativa aspekterna av ett grafdatabashanteringssystem samt att visa hur en tjänst kan skapas genom att använda ett grafdatabashanteringssystem. Resultaten indikerar att Neo4j är väldigt intuitivt och lättanvänt, vilket skulle göra den optimal för prototyping och mindre system, men på grund av den använda evalueringsmetoden så behöver mer forskning inom detta område utföras innan dessa slutsatser kan bekräftas.
Ryttman, Tobias, and Nathalie Tillaéus. "Omkonstruktion av justerskruv i expanderbar duschstång." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17156.
Повний текст джерелаThis bachelor degree project in integrated product development was carried out at the University of Skövde in collaboration with Ericsindustrier in Töreboda. The report describes the methodology and the process that has been carried out in the project to achieve all the stated objectives. The scope was determined to be a redesign of an adjusting screw placed in an expandable shower rod. The shower rod is considered an important part of Ericsindustrier's product range. The reason for the need of a reconstruction was the number of components and the components assembly. The component number was required to be minimized by using DFx principles where the same material was sought throughout the product. Decreased quality and lower durability were defined as critical areas since Ericsindustrier wanted to maintain customer satisfaction and the product must hold for at least 200 N after the redesign. A five-stage model formed the basis of the project structure where the design process began with a preliminary study. The focus was on information gathering, observations and mapping of the current situation. The generation phase was imbued with methodology to explore solution space. This included, among other things, brainstorming, morphological matrix and sketching. In the project, prototypes had a great impact as they functioned as both generation and evaluation of solutions. They have also acted as communication with companies and users throughout the process. Iterations have characterized the whole process to achieve a product development. In order to maintain a user-centred design, the project included several user tests. The feet of the shower rod and the two pipes that form the shower rod itself were identified as separate problems. These issues have been discussed with the company. Concept selection was carried out according to the wishes of the company, tests, DFx principles and discussions until it ended in a final concept. This concept met the required requirements and needs. Therefore, it was an affordable, high quality and environmentally friendly product.
Valík, Michal. "Návrh mobilního robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318858.
Повний текст джерелаTvedt, Ole Christian. "Quantum key distribution prototype." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elektronikk og telekommunikasjon, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15845.
Повний текст джерелаDenaro, Chris. "Dialogues with the prototype." Queensland University of Technology, 2007. http://eprints.qut.edu.au/16553/.
Повний текст джерелаIqbal, Mohammad. "Polarization stereoscopic imaging prototype." Phd thesis, Université de Bourgogne, 2011. http://tel.archives-ouvertes.fr/tel-00702271.
Повний текст джерелаNewtson, Kathy. "PROTOTYPE IP SATELLITE NETWORK." International Foundation for Telemetering, 2003. http://hdl.handle.net/10150/606742.
Повний текст джерелаPrototyping an Internet Protocol (IP) compliant architecture will demonstrate a realistic basis for satellite communication design. The prototype IP architecture should prove seamless and secure communications between the satellites and ground stations. Using commercial off the shelf (COTS) equipment, design and development of satellite communications becomes easier and less expensive than developing specialized equipment. IP space applications will improve communications while minimizing development costs.
Mandelecha, Sonal. "Prototype Digital Forensics Repository." ScholarWorks@UNO, 2005. http://scholarworks.uno.edu/td/292.
Повний текст джерелаYamaguchi, Takahiro. "Investigating face prototype processing." abstract and full text PDF (UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3316379.
Повний текст джерела