Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Program and technical conditions.
Статті в журналах з теми "Program and technical conditions"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Program and technical conditions".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
1
Gibbeson, J. M. "PETROLEUM PROCESSING PLANTS—TECHNICAL SURVEILLANCE PROGRAM." APPEA Journal 43, no. 1 (2003): 787. http://dx.doi.org/10.1071/aj02048.
Повний текст джерелаАнотація:
On behalf of itself and BHP-B, Esso operates offshore production platforms in Bass Strait, a crude stabilisation and gas processing plant at Longford and a LPG fractionation plant at Long Island Point, Victoria. The Technical Surveillance Program for these facilities is implemented at both the Operator and Engineering levels. The program has been enhanced by building on existing DCS process control and process information (PI) systems and through development of a more structured engineering monitoring system. The enhanced program continues to register tangible benefits in integrity, product quality, recovery, efficiency and reliability and capacity.At the operator level, the process is monitored continuously, assisted by process alarms to maintain the plant within the normal desirable operating zone. Safe operating limits define the outside boundary of the safe operating envelope which is secured with shutdown and other automatic protective devices. Alarm and limit conditions associated with these parameters have been incorporated into the DCS control system with pre-defined operator responses appearing automatically on the screen if the condition is reached.At the engineering level, the surveillance program is a systematic periodic monitoring process focussing on optimum performance and continuous improvement. It is structured using the elements of a management system. Within this framework, engineering spreadsheets have been developed with direct links to process data via process information system software. The spreadsheets assist plant engineers to efficiently monitor the key performance variables; they also pre-define the acceptable operating range, calculate statistical performance, highlight deviations and hyperlink back to the PI system for more detailed troubleshooting. Day-today deviations and performance improvements are fed back and reviewed at the working level, more significant issues are formally investigated and reviewed with management. Key data and overall performance is summarised monthly, and formally reviewed by plant and engineering management.
2
Anisimov, V. G., E. G. Anisimov, A. Ya Chernysh, and D. A. Melnik. "The Model for Supporting Decision-Making During Designing Programs of Innovation Development at Enterprises of Electro-Technical Industry of Machine-Building." Vestnik of the Plekhanov Russian University of Economics, no. 4 (July 21, 2021): 140–51. http://dx.doi.org/10.21686/2413-2829-2021-4-140-151.
Повний текст джерелаАнотація:
Electro-technical industry takes a specific place in economy of the Russian Federation. It is connected with its serious contribution to building-up favorable conditions for developing actually all industries of economy, social and household fields, comfortable living and working conditions of people. Provision of sustainability of electro-technical industry functioning is an essential foundation for power security of the country. At the same time sustainability and competitiveness of these enterprises depend on the quality of programs for their innovation development. The goal of the research is to work out the mathematic model for supporting decision-making during designing programs of innovation development at electro-technical enterprises. Cost minimization is a criterion of decision optimality in the model. One specific feature of the model is taking into account the uncertainty in estimation of possible costs connected with development and implementation of projects, included in the program. To resolve the problem the author put forward the iteration algorithm of successive shaping of expedient version of the program that takes into consideration specific features of the model. The model and algorithm can serve as a foundation to design concrete methods of innovation development program optimization. Introduction of such methodology could provide an opportunity to raise the quality of innovation development management at enterprises of electrotechnical industry of machine-building.
3
Liu, Xue Jing, Shi Chang Xu, Cheng Cheng Qiang, and Baoan Li. "Study on Operating Conditions of Membrane-Aerated Bioreactor." Advanced Materials Research 581-582 (October 2012): 1193–96. http://dx.doi.org/10.4028/www.scientific.net/amr.581-582.1193.
Повний текст джерелаАнотація:
A membrane-aerated bioreactor (MABR) has the technical feasibility of water treatment. This paper systematically studies the main operating conditions impact on the MABR process of dealing with wastewater to determine the optimum operating conditions, and made the possible implementation of the technology program. The results lay a good foundation for further research and development of MABR treatment process and technology.
4
International Monetary Fund. "Pakistan--Financial Sector Assessment Program--Technical Note--Condition of the Banking System: Financial Sector Assessment Program—Technical Note—Condition of the Banking System." IMF Staff Country Reports 05, no. 157 (2005): 1. http://dx.doi.org/10.5089/9781451830668.002.
Повний текст джерела
5
TAMURA, Yu, Yasuhisa ANDO, and Ken'ichi HIRATSUKA. "P-MNS-05 FRICTION ANISOTROPY BETWEEN DIFFERENT MATERIALS MEASURED UNDER HIGH-VACUUM CONDITIONS(Micro/Nanosystem Science and Technology,Technical Program of Poster Session)." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2009 (2009): 425–26. http://dx.doi.org/10.1299/jsmemipe.2009.425.
Повний текст джерела
6
Zapletal, Pavel, Pavel Prokop, and Vítězslav Košňovský. "Evolution of Microclimatic Conditions in Paskov Mine / Ewolucja Warunków Mikroklimatycznych W Kopalni Paskov." Archives of Mining Sciences 57, no. 4 (December 1, 2012): 1045–55. http://dx.doi.org/10.2478/v10267-012-0069-3.
Повний текст джерелаАнотація:
Abstract The main subject of this paper focuses on scientific and research activities conducted in the Institute of Mining Engineering and Safety of the VŠB-Technical University of Ostrava. Cooperation between the VŠB-Technical University of Ostrava and OKD A.S., the only representative of coal mining in the Ostrava-Karviná coal basin, has recently begun to develop again. This paper describes an example discussed in a certain study, which has been undertaken for the Paskov mine, OKD a.s., dealing specifically with the evolution of microclimate parameters in mines that depend on the progress of mining activity at deeper levels over a period of several years. To this end, a special program, aimed at determination of the necessary refrigerating capacity, was established at the VŠB-Technical University of Ostrava.
7
Sanchez-Espinoza, Victor Hugo, Stephan Gabriel, Heikki Suikkanen, Joonas Telkkä, Ville Valtavirta, Marek Bencik, Sören Kliem, et al. "The H2020 McSAFER Project: Main Goals, Technical Work Program, and Status." Energies 14, no. 19 (October 4, 2021): 6348. http://dx.doi.org/10.3390/en14196348.
Повний текст джерелаАнотація:
This paper describes the main objectives, technical content, and status of the H2020 project entitled “High-performance advanced methods and experimental investigations for the safety evaluation of generic Small Modular Reactors (McSAFER)”. The main pillars of this project are the combination of safety-relevant thermal hydraulic experiments and numerical simulations of different approaches for safety evaluations of light water-cooled Small Modular Reactors (SMR). It describes the goals, the consortium, and the involved thermal hydraulic test facilities, e.g., the COSMOS-H (KIT), HWAT (KTH), and MOTEL (LUT), including the experimental programs. It also outlines the different safety assessment methodologies applied to four different SMR-designs, namely the CAREM (CNEA), SMART (KAERI), F-SMR (CEA), and NuScale. These methodologies are multiscale thermal hydraulics, conventional, low order, and high fidelity neutron physical methods used to demonstrate the inherent safety features of SMR-core designs under postulated design-basis-accident conditions. Finally, the status of the investigations is shortly discussed followed by the dissemination activities and an outlook.
8
Iskandar, Dina Trisiana, Sumartono Sumartono, and Tjahjanulin Domai. "EVALUASI PROGRAM PEMBINAAN DAN PENGEMBANGAN INDUSTRI KECIL DAN MENENGAH DI KABUPATEN PONOROGO." JPSI (Journal of Public Sector Innovations) 1, no. 1 (January 9, 2017): 17. http://dx.doi.org/10.26740/jpsi.v1n1.p17-22.
Повний текст джерелаАнотація:
The purpose of this research is to evaluate implementation of SME development program using CIPP model. This evaluation used qualitative approach method. The context evaluation revealed that the task of Department of Industry, Trade, Cooperative and SMEs Ponorogo Regency. The input evaluation includes: development program, budgets, manpower, conditions of participants and facilities. In the process evaluation, showed that technical training is given more than non-technical. The product evaluation, the objectives program to increase the skills have not been fully optimized, while the growth of new entrepreneur objectives cannot be measured due to lack of training evaluation.
9
Kantor, V. Z. "Inclusive Higher Education: Special Environmental Conditions for Teaching Disabled Students." Psychological-Educational Studies 11, no. 3 (2019): 44–56. http://dx.doi.org/10.17759/psyedu.2019110304.
Повний текст джерелаАнотація:
Taking into account the experimentally recorded nomenclature of the specific educational and social needs of students with disabilities and in the context of the notion that the adapted basic professional educational program at the university involves the adaptation of the conditions for obtaining education rather than its content, the structure of the adapted environment of the university as an ordered set of information and educational institutions is characterized architectural, spatial, socio-psychological and rehabilitation-educational the conditions necessary for the successful development of students with disabilities the normative content of the educational program, specified by the Federal State Educational Standard of Higher Education. Within the framework of the corresponding logic and based on practical experience, the place is determined for special technical educational and social facilities, special formats for organizing and teaching methodological support of the educational process, as well as psychological and social rehabilitation support for students with disabilities, etc. in the system of inherent attributes of the university adapted basic professional educational program.
10
GYOURIKI, Kiyoto, and Youichi KAWAKUBO. "HDI-14 EFFECTS OF ENVIRONMENTAL CONDITIONS ON TRIBOLOGICAL CHARACTERISTICS OF THIN-FILM DISKS(Head/Disk Interface and Tribology IV,Technical Program of Oral Presentations)." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2009 (2009): 127–28. http://dx.doi.org/10.1299/jsmemipe.2009.127.
Повний текст джерела
11
Azimbayeva, Zh A. "The PREPARATION OF TEACHERS OF HIGHER TECHNICAL EDUCATION TO ACTIVITIES IN CONDITIONS OF INNOVATIVE CHANGES." BULLETIN Series of Pedagogical Sciences 72, no. 4 (December 15, 2021): 152–60. http://dx.doi.org/10.51889/2021-4.1728-5496.18.
Повний текст джерелаАнотація:
The modern requirements of society, industry and government to technical university graduates define the direction of new studies at technical education. The task for modern university is seen at preparation of innovative specialists of technical education, that are able to work in conditions of unknown future, technical risks, and dangers; to construct technologies of high order with consideration of humanly accepted values and ethical norms. The success to achieve this task is provided by the preparation of teachers of technical education to organize innovational educational program, that faces requirements of society of new innovational tenor; to form professional-oriented education environment for future engineers and to organize different forms of interaction (remote, mixed, tutor-based and etc.); to master competencies of new type (scientifical-research based, managerial, entrepreneurial). The aim of the article is to find the degree of readiness of teachers to organize own activity and activity for students in conditions of innovative changes. The scientific novelty of research is based on enriching ideas of activity-based approach with knowledge on specific features of higher technical education teacher activity, that work with students of engineering majors; professional psychological-pedagogical, methodical, didactical tasks that they solve in organizing the educational process. The practical importance is seen at the opportunity to use the resource for conducting further research, studying difficulties of higher technical education teachers, development of scientific materials for listeners of increasing qualification courses.
12
Gerasimova, Elena B., Anna A. Kurashova, Mariya V. Tipalina, Mariya V. Bulatenko, and Nataliya V. Tarasova. "New state standards of higher education for training of digital personnel in the conditions of Industry 4.0." On the Horizon 27, no. 3/4 (October 11, 2019): 199–205. http://dx.doi.org/10.1108/oth-07-2019-0043.
Повний текст джерелаАнотація:
Purpose The purpose of this paper is to develop new state standards of higher education for training digital personnel in the conditions of Industry 4.0 by the example of modern Russia. Design/methodology/approach An overview and a critical analysis of the expert and analytical report of the research institute “Higher School of Economics” on the results of digital modernization of the modern Russian economy entitled “Indicators of the digital economy” in the part “Human resources of the digital economy” is performed. Findings It is proved that formation of the personnel infrastructure for digital modernization of economy requires standardization of the process of training of digital personnel. The new state standards of higher education for training digital personnel in the conditions of Industry 4.0 by the example of modern Russia are created on the basis of the existing directions of the master’s program. Originality/value An authors’ classification of digital personnel according to the criterion of performed functions for application of digital technologies is offered, and two categories of them are distinguished: technical specialists and narrow sectorial specialists – which allowed specifying the scientific and methodological provision of the process of training and statistical accounting of digital personnel in Russia. The authors determine the perspective directions of training of digital personnel within the directions of the master’s program, which are implemented in modern Russia, and the corresponding categories of digital personnel. The authors also offer additional requirements to the results of mastering of the main educational programs of the master’s program, the structure of the main educational programs of the master’s program and the conditions of implementation of the main educational programs of training of masters within training of digital personnel. The authors’ conclusions and recommendations ensure the information support for training of digital personnel of modern Russian universities, as well as monitoring and control of this process of state regulators.
13
Zhao, Xue Mei. "Application of GX Simulator Software in PLC Program Development." Applied Mechanics and Materials 121-126 (October 2011): 3819–23. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.3819.
Повний текст джерелаАнотація:
Simulation software is used to PLC program development,Engineering and technical personnel can get rid of the shackles of PLC hardware conditions,They can be flexible and independent to design and debug program. Sequential function chart (SFC) is a programming method of efficient and simple in PLC program development,For complex procedures,The efficiency is very high,This paper introduces PLC program development and simulation with sequential function chart and simulation software,This method can greatly improve efficiency.
14
Ratke, Lorenz, Sonja Steinbach, Georg Müller, Marc Hainke, András Roósz, Yves Fautrelle, M. D. Dupouy, et al. "MICAST – Microstructure Formation in Casting of Technical Alloys under Diffusive and Magnetically Controlled Convective Conditions." Materials Science Forum 508 (March 2006): 131–44. http://dx.doi.org/10.4028/www.scientific.net/msf.508.131.
Повний текст джерелаАнотація:
The MICAST research program focuses on a systematic analysis of the effect of convection on the microstructure evolution in cast Al-alloys. The experiments of the MICAST team are carried out under well defined thermally and magnetically controlled, convective boundary conditions and analyzed using advanced diagnostics and theoretical modeling, involving phase field simulation, micro-modeling and global simulation of heat and mass transport. The MICAST team uses binary, ternary and technical alloys of the Al-Si family. This paper gives an overview on recent experimental results and theoretical modelling of the MICAST team.
15
Laeni, Naim, Margo van den Brink, and Jos Arts. "Institutional Conditions for Inclusive, Flood Resilient Urban Deltas: A Comparative Institutional Analysis of Two International Resilience Programs in Southeast Asia." Water 13, no. 18 (September 9, 2021): 2478. http://dx.doi.org/10.3390/w13182478.
Повний текст джерелаАнотація:
Policy makers in Southeast Asian flood-vulnerable regions are confronted with various institutional challenges when planning for inclusive flood resilience. This paper focuses on the role of international resilience programs and investigates how these programs can enable institutional transformation. The key question is which institutional conditions promote the development and implementation of inclusive flood resilience strategies by international resilience programs. The Mekong Delta Plan in Vietnam (MDP) and the Water as Leverage for Resilient Cities Asia (WaL) program in Semarang, Indonesia, are selected as the cases for a comparative analysis. To structure the comparative analysis of these programs, the Institutional Analysis and Development (IAD) framework is adopted and operationalized for the institutional analysis of inclusive flood resilience planning. The findings illustrate that whereas the MDP was able to involve decision makers from the national government and international financial institutions for mobilizing funding and technical support, the strength of the WaL program was its enabling environment for the cocreation of context-specific flood resilience proposals. Overall, this study concludes that the institutional conditions that enable project financing and the implementation of long-term and integrated flood resilience solutions are determined by engagement with national governments and by ownership of the solutions at both the national and local levels.
16
Safaruddin, Safaruddin, Candra Wijaya, and Rahmadi Ali. "EVALUASI PROGRAM PENINGKATAN KOMPETENSI GURU MADRASAH IBDTIDAIYAH PADA DIKLAT PENYUSUNAN RPP DI BALAI DIKLAT KEAGAMAAN MEDAN." Edukasi Islami: Jurnal Pendidikan Islam 9, no. 02 (February 25, 2021): 537. http://dx.doi.org/10.30868/ei.v9i02.1191.
Повний текст джерелаАнотація:
This research was conducted at the Balai Diklat Keagamaan Medan with the aim of evaluating the Madrasah teacher competency improvement program in substantive technical training for the preparation of the RPP for Madrasah Ibtidaiyah Teachers. This type of research is qualitative research using the CIPP (context, input, process and product) evaluation model which focuses on core questions, namely the context of the Madrasah teacher competency improvement program, the input conditions for the Madrasah teacher competency improvement program, the process conditions for the improvement program. Madrasah teacher competencies and product conditions in the Madrasah teacher competency improvement program. The results of this study consisted of 4 components. First. The context dimension is the analysis of the legal basis criteria, that every education and training must have a legal umbrella including Regulation of the Minister of Religion 10 of 2018 concerning amendments to PMA No. 59 of 2015 concerning the Organization and Work Procedure of the Education and Training Center and the Criteria for the Analysis of the Education and Training Organization, that the education and training organization that manages the education and training activities has a legal basis and also has a legal basis at work, the education and training organization is a transition of responsibility from the Kasi to the training committee. Educational and Religious Technical Staff were then given a Letter of Appointment (SK).
17
Mamikonyants, L. G., S. S. Ananyants, B. V. Kislitskii, and A. B. Netseevskii. "Standard inspection program and evaluation criteria of the technical condition of generators." Hydrotechnical Construction 33, no. 11 (November 1999): 630–31. http://dx.doi.org/10.1007/bf02903426.
Повний текст джерела
18
Feofanov, Alexander, and Nataliya Bondarchuk. "Automated verification of compliance of technical documentation of an enterprise in the conditions of digital technology." MATEC Web of Conferences 224 (2018): 02105. http://dx.doi.org/10.1051/matecconf/201822402105.
Повний текст джерелаАнотація:
The article describes the current situation of the country in the field of digital technologies and the importance of development in this direction. The sources of growth due to digitalization, as well as the impact on the standard of living of human digital technologies are described. Particular attention is paid to the need to introduce and develop a proposed program that will manage all discrepancies based on risk-based thinking and the PDCA principle.
19
Elugachev, Pavel, and Boris Shumilov. "Development of the technical vision algorithm." MATEC Web of Conferences 216 (2018): 04003. http://dx.doi.org/10.1051/matecconf/201821604003.
Повний текст джерелаАнотація:
The purpose of the work is creation of a set of technical means (switches, sensors) for recognition of transport infrastructure facilities, including development of algorithms for autonomous operation of technical facilities under changing environmental factors. In this work, we used methods for determining the volume of a three-dimensional facilities from the data of photo and video recording of the surrounding situation. The algorithm of technical vision was obtained, which is implemented as a program on a mobile device for recognition by means of stereometry of transport infrastructure facilities and their defects and storage of transport infrastructure defects. The novelty of the research is building of decision algorithms based on devices and sensors that recognize changing road conditions, namely, defects in coverage. The data obtained can be used in the planning of road repairs, in the analysis of traffic accidents by road police, road users for processing complaints, etc.
20
Svynous, Ivan, Olesya Havryk, and Valentyna Byba. "Organizational and economic principles of modernization of technical means as a basis of reproduction of material and technical base of agricultural enterprises." Economic discourse, no. 3 (September 2019): 57–65. http://dx.doi.org/10.36742/2410-0919-2019-3-6.
Повний текст джерелаАнотація:
Introduction. Technical potential is the key to innovative management and economic growth of agricultural production. In the conditions of poor quality and reliability of the machines, the dealer service of the manufacturing plants is poorly developed, the main task of which is the elimination of defects in machinery. In this regard, the task of modernizing the technical means of farms in the corporate sector of the agrarian economy arises. Methods. The following methods and techniques are used for realization of the set tasks: monographic, statistical groups, correlation and regression analysis, graphic – for comprehensive study of the current state of agricultural production and to determine the factors influencing its technical modernization. Results. In the conditions of decrease of technical support of agricultural producers of primary importance becomes the support in the working condition of the machine and tractor park, timely repair and restoration of technical resources, which implies the development of a system of complex engineering service. In turn, it became necessary to create a system of information and consulting and staffing for agricultural producers. Discussion. One of the effective ways of modernizing the technical base of agricultural producers involves the use of the program Trade in. This program is a system of offsetting, in which used equipment can be used as a means of partial payment for new equipment. The equipment, which was used and purchased from customers under the scheme Trade in, undergoes pre-sales training with the replacement of all defective components and assemblies, then it is offered for sale. Keywords: agricultural enterprise, modernization, repair, agricultural machinery, technical base.
21
Kurdelski, Marcin, Michał Stefaniuk, Wojciech Zieliński, and Tomasz Bartoszek. "The Verification of the Technical Conditions of a Combat-Trainer Jet’s Airframe." Fatigue of Aircraft Structures 2015, no. 7 (December 1, 2015): 34–40. http://dx.doi.org/10.1515/fas-2015-0006.
Повний текст джерелаАнотація:
Abstract The combat-trainer jet aircraft is an important element in the process of fighter pilot training. This type of aircraft provides a means of transition from basic training on low-speed propeller trainers to piloting high-speed and highly maneuverable fighter aircraft. Nowadays, in Poland, the PZL TS-11 “ISKRA” jet trainers, designed in 1960s, are employed for training purposes. Because of financial considerations this trainer hasn’t been yet replaced by modern aircraft that conforms to current specifications and needs. As is the case with other aircraft in service of the PLAF, the TS-11 fleet has a large reserve of remaining Hourly Service Life (HSL). This opens an opportunity to extend the Calendar Service Life (CSL), so as it matches the HSL. To this end, a series of technical and research activities needed to be undertaken. The Air Force Institute of Technology is conducting the necessary verification of airframe structural conditions in cooperation with the Military Aviation Works No. 1 J.S.C. (branch in Dęblin) responsible for the overhaul and repair operations. The AFIT’s activities in this program include: deformation analysis of the selected surface areas of the wing and the fuselage; assessment of hidden corrosion in riveted joints; non-destructive testing of selected riveted joints. This paper describes the deformation analysis. As of today, the first stage of the deformation inspection has been completed. At this stage, baseline surface measurements were obtained. Further inspections shall be performed cyclically. The future measurements will be used to establish the areas that deform due to the aircraft operation.
22
Tucki, Karol, Andrzej Wasiak, Olga Orynycz, and Remigiusz Mruk. "Computer Simulation as a Tool for Managing the Technical Development of Methods for Diagnosing the Technical Condition of a Vehicle." Energies 13, no. 11 (June 4, 2020): 2869. http://dx.doi.org/10.3390/en13112869.
Повний текст джерелаАнотація:
Introduced by the Civil Code, the rules of road safety are introducing continuously increasingly strict requirements on motor vehicles. These requirements relate to various aspects of the technical condition of vehicles, both those that determine traffic safety and those that affect the vehicle’s environmental impact. The law requires regular diagnosis of the technical condition of vehicles in service. Diagnostic tests conducted in the form of road tests or the tests performed in workshop conditions allow to determine the symptoms of dysfunctions of the tested vehicle, not always clearly defining the causes and location of damage. The purpose of the work is the design the simulation of a station for of vehicle dynamics tests up to 3.5 t using simulation programs OpenModelica and SciLab. A simulation of the work of the stand for testing the dynamics of vehicles in the form of a chassis dynamometer was achieved. The program enables the simulation of tests: NEDC (New European Drive Cycle), WLTP (Worldwide Harmonized Light Vehicle Test Procedure), CADCM150 (joint Artemis driving cycle—Motorway at vMax = 150 kph), CADCU (Common Artemis Driving Cycle—Urban), FTP75 EPA (Federal Test Procedure, Environmental Protection Agency). The simulator (for any assumed type of vehicle) can be used in two modes: 1. Introduction of the presumed cause—Generates the expected results in the functioning of the vehicle. This function can be used to create a cause–effect relational database. 2. Analysis of data from the actual diagnostic system suggesting the causes of the observed (measured) errors in the functioning of the system. The simulator can be used both to design and implement the technological development of intelligent diagnostic systems, and to support the creation of application software for a workshop diagnostic system. Introducing the simulator into practice will also enable the improvement of road safety management.
23
MAKSYUTOVA, Nadezhda. "DEVELOPMENT OF INFORMATION-PEDAGOGICAL COMPETENCE FOR TEACHERS OF SECONDARY VOCATIONAL EDUCATION IN THE CONDITIONS OF EDUCATIONAL ORGANIZATION." PRIMO ASPECTU, no. 1(41) (March 27, 2020): 76–83. http://dx.doi.org/10.35211/2500-2635-2020-1-41-76-83.
Повний текст джерелаАнотація:
The article is devoted to the actual problem of formation of information -pedagogical competence for teachers of secondary vocational education (SVO). The educational organization is assessed as a basis for advanced training in the field of new information technologies. The author of the article offers a program of additional professional education (advanced training) for implementation in an educational institution, focusing on the conditions for its implementation. On the example of the introduction of the proposed model in the work of the SVO institution, conclusions are drawn about the feasibility and effectiveness of using the additional education program to increase the level of information-pedagogical competence for college and technical teachers.
24
Springgate, Benjamin, Lingqi Tang, Michael Ong, Wayne Aoki, Bowen Chung, Elizabeth Dixon, Megan Dwight Johnson, et al. "Comparative Effectiveness of Coalitions Versus Technical Assistance for Depression Quality Improvement in Persons with Multiple Chronic Conditions." Ethnicity & Disease 28, Supp (September 6, 2018): 325–38. http://dx.doi.org/10.18865/ed.28.s2.325.
Повний текст джерелаАнотація:
Significance: Prior research suggests that Community Engagement and Planning (CEP) for coalition support compared with Resources for Services (RS) for program technical assistance to implement depression quality improvement programs improves 6- and 12-month client mental-health related quality of life (MHRQL); however, effects for clients with multiple chronic medical conditions (MCC) are unknown.Objective: To explore effectiveness of CEP vs RS in MCC and non-MCC subgroups.Design: Secondary analyses of a cluster-randomized trial.Setting: 93 health care and community-based programs in two neighborhoods.Participants: Of 4,440 clients screened, 1,322 depressed (Patient Health Questionnaire, PHQ8) provided contact information, 1,246 enrolled and 1,018 (548 with ≥3 MCC) completed baseline, 6- or 12-month surveys.Intervention: CEP or RS for implementing depression quality improvement programs.Outcomes and Analyses: Primary: depression (PHQ9 ≥10), poor MHRQL (Short Form Health Survey, SF-12<40); Secondary: mental wellness, good physical health, behavioral health hospitalization, chronic homelessness risk, work/workloss days, services use at 6 and 12 months. End-point regressions were used to estimate intervention effects on outcomes for subgroups with ≥3 MCC, non-MCC, and intervention-by- MCC interactions (exploratory).Results: Among MCC clients at 6 months, CEP vs RS lowered likelihoods of depression and poor MHRQL; increased likelihood of mental wellness; reduced work-loss days among employed and likelihoods of ≥4 behavioral-health hospitalization nights and chronic homelessness risk, while increasing faith-based and park community center depression services; and at 12 months, likelihood of good physical health and park community center depression services use (each P<.05). There were no significant interactions or primary outcome effects for non-MCC.Conclusions: CEP was more effective than RS in improving 6-month primary outcomes among depressed MCC clients, without significant interactions.Ethn Dis. 2018;28(Suppl 2):325-338; doi:10.18865/ed.28.S2.325.
25
Wanqi, Luo, and Elena L. Bolotova. "Assessment of future teachers' satisfaction with the conditions for the implementation of Russian-Chinese joint educational programs." Perspectives of Science and Education 53, no. 5 (November 1, 2021): 110–24. http://dx.doi.org/10.32744/pse.2021.5.8.
Повний текст джерелаАнотація:
The relevance of the research is due to the need to increase the competitiveness of joint educational programs of pedagogical orientation in the system of Russian-Chinese relations in the field of higher education. The student satisfaction indicator not only indicates the attractiveness/unattractiveness of the educational program, but also allows you to identify the most vulnerable places in the organization of the educational process. The purpose of the study is to identify ways to improve the conditions for the implementation of Russian-Chinese joint educational programs of pedagogical orientation. Materials and methods. The study applied a descriptive method to conducting a survey of students studying under the bachelor's degree majors "Preschool Education", "Music Education", "Fine Arts" at the Moscow Institute of Arts of the Weinan Pedagogical University (Province Shanxi). 198 graduates participated in the questionnaire, accounting for 77% of the total number of graduates from the Moscow Institute of Arts. The study was conducted using the author's questionnaire, compiled taking into account the practice of assessing student satisfaction at Moscow Pedagogical State University and the recommendations of the Ministry of Education of the People's Republic of China on the evaluation of joint Chinese-foreign educational programs. Results. In the study, the assessment of students' satisfaction with learning was carried out in five directions: satisfaction with the quality and content of training, satisfaction with the organization of the educational process, satisfaction with the material and technical support of the educational process, satisfaction with the organization of research activities, satisfaction with the socio-psychological climate at the institute. The study found that students' satisfaction with the organization of the educational process (68.2%) and its material and technical support (66.92%) was the highest, compared with their publishing activities in research work (60.4%). Despite the impossibility of implementing programs under the "3+1" scheme, due to the COVID-19 pandemic, the internal motivation of students during online training in the "4+0" mode did not decrease, which led to the preservation of the contingent of students throughout the entire period of program implementation. Discussion and conclusion. The research results have practical significance for managers, employees and teachers of pedagogical universities participating in the implementation of Chinese-foreign joint educational programs, as well as for representatives of the scientific community dealing with the problems of ensuring the quality of such programs. Further research of students' satisfaction with studying under Russian-Chinese joint educational programs for teacher training can be aimed at analyzing the quality of implementation of such programs at the level of academic degrees of students of pedagogical universities.
26
Sarukhanyan, Arestak, and Ani Manukyan. "The Technical Data Analysis of Khachen Reservoir’s Hydrosystem." Advanced Materials Research 1020 (October 2014): 839–43. http://dx.doi.org/10.4028/www.scientific.net/amr.1020.839.
Повний текст джерелаАнотація:
After operation of ground hydraulic constructions, it is necessary to implement monitoring during several years; which includes collecting data concerning filtration flow, deposition, strength, sliding and stability of dams and other hydraulic constructions. The technical state study conclusions are drawn upon the collected data analyses. The aim of the work is to make a technical state study of Khachen reservoir hydro system to find out the further exploitation opportunities separated nodes, to process engineering measures program, by the realization of which there will be established conditions for their further safe operation. For the above mentioned purpose there have been implemented the followings: technical data analyses of the dam and it’s separate nodes, technical-economic analyses of the dam, analyses of storage alluvium, net volume and water balance, physical-mechanical properties lab studies of dam ground. Homogeneity estimation of dam by geophysical methods, discovering of filtration centralized discharge across dam and lateral prism, making conclusions, separate nodes description located in the dam, technical state analyses and making conclusions, strength and stability analyses of the dam under static and seismic loading conditions, taking into consideration the ground laboratory experiments and dam geodetic measurements.
27
Bogdanowicz, Artur, Tomasz Kniaziewicz, and Marcin Zacharewicz. "The Use of a Mathematical Model of Marine Diesel Engine in a Computer Program." New Trends in Production Engineering 1, no. 1 (October 1, 2018): 453–60. http://dx.doi.org/10.2478/ntpe-2018-0056.
Повний текст джерелаАнотація:
Abstract The paper describes the application of the author’s mathematical model of gas-dynamic processes for a marine piston engine based on a computer program. The developed mathematical and numerical model is designed to conduct simulation diagnostics. Therefore, it is possible to carry out calculations for motors in different technical conditions and observing influence of changes in technical condition on selected parameters of its work. Simulation of changes in technical condition is carried out by modifying parameters of structure’s model object. The article contains a detailed description of each options of the computer program. From the main program window, user can select type of engine model (supercharging method, cylinder number, work order, stroke and piston diameter and a number of other parameters). Through a window of simulation of known and recognizable damages such as: change in fuel dose for each cylinder, change in intake and outlet valves, leakage of piston-ring-cylinder system, change of injector hole cross section. Final windows show results of calculations in form of mileage parameters of engine as a function of crank angle.
28
Epriadi, Dedi. "Evaluasi Pelaksanaan Tugas Unit Pelaksana Teknis Dinas Pendidikan Kecamatan Rantau Pandan Kabupaten Bungo Provinsi Jambi." Dialektika Publik : Jurnal Administrasi Negara Universitas Putera Batam 5, no. 1 (August 24, 2020): 1–9. http://dx.doi.org/10.33884/dialektikapublik.v5i1.2412.
Повний текст джерелаАнотація:
This research was conducted due to several problems, including: weak annual work program planning, weak program control, this research was conducted on 60 people involved in the Technical Implementation Unit in Rantau Pandan using the survey method with a descriptive qualitative approach with the aim of knowing how far. where is the implementation of the Technical Service Unit of the Rantau Pandan District Education Office. The results obtained: the duties and functions have not been carried out optimally, in providing direction it is quite good, there is still a lack of supervision carried out and from the results above there are several conditions that cause this to occur including the skill factor and the employee discipline factor.
29
Baranik, O., V. Berezanskii, A. Datsenko, and О. Tesnikov. "APPLICATION OF THE PRINCIPLE OF RELATION TO CHOOSE THE TECHNICAL OPERATION PROGRAM OF GUIDED AIR WEAPONS AT TRANSITION TO OPERATION ACCORDING TO TECHNICAL CONDITION." Collection of scientific works of the National Academyof the National Guard of Ukraine 2, no. 36 (2020): 44–54. http://dx.doi.org/10.33405/2409-7470/2020/2/36/223552.
Повний текст джерелаАнотація:
The article presents the current state of the available stock of guided air weapons and the problem of transition of guided air weapons to operation according to technical condition. The transfer of guided air weapons to operation according to technical condition involves increasing the role of measurement operations and control of their parameters and characteristics. This will determine the actual technical condition and make informed decisions about further operation. In general, the effective-ness of control a technical condition of aviation missiles significantly affects the readiness for use of aviation equipment and the combat capabilities of this equipment in performance of the tasks. The exciting control model and methods for selecting parameters of technical condition is universal in relation to the variants of construction of the technical maintenance program a guided air weapons allows to conduct research into these indicators. However, this program does not indicate the plural of variant that should be selected if the undetermined influence of different nature factors to carry out a set of maintenance and repair work for guided air weapons. The possibility of using the principle of correlation, when choosing the program of technical operation a guid-ed air weapons during the transition to operation according to technical condition. With the help of the correlation principle, an approach to the choice of the program of technical operation a guided air weapons can be developed in case of unknown infor-mation about the mechanisms of influence of various internal and external factors on the properties of the guided air weapons, their effect on the technical condition and features of the units of aviation guided missile that are not amenable to instrumental con-trol. To implement the control of guided air weapons with using a principle of correlation need to use the results of practical appli-cations of aviation guided missile, including other types of fire tests, sample tests using the physico-chemical analysis of powder and explosive charges.
30
TSUCHIMI, Daisuke, Takeshi OKUYAMA, and Mami TANAKA. "BIO-08 DEVELOPMENT OF A HAPTIC SENSOR FOR MONITORING HUMAN SKIN CONDITIONS : MEASUREMENT OF SOFTNESS, SMOOTHNESS, AND TACKINESS(Bio-medical Equipments III,Technical Program of Oral Presentations)." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2009 (2009): 311–12. http://dx.doi.org/10.1299/jsmemipe.2009.311.
Повний текст джерела
31
IVANOV, Sergey, Polina IVANOVA, and Sergey KUVSHINKIN. "Promising model range career excavators operating time assessment in real operating conditions." Journal of Mining Institute 242 (May 26, 2020): 228. http://dx.doi.org/10.31897/pmi.2020.2.228.
Повний текст джерелаАнотація:
The development prospects of the mining industry are closely related to the state and development of modern mining machinery and equipment that meet the technical and quality requirements of mining enterprises. Enterprises are focused on a quantitative assessment – the volume of mineral extraction, depending on the functioning efficiency of a promising series of mining machines, which include modern mining excavators. Downtime and unplanned shutdowns of mining excavators directly depend on the operating conditions of the mining machine, which has negative influence on the machine as a whole and its technical condition, which entails a decrease in the efficiency of using expensive mining equipment and economic losses of the mining enterprise.
The rationale for external factors that affect the operating time and technical condition of mining excavators is given. For a more detailed assessment of the influence of external influences on the efficiency of operation of mining machines, the influencing factors are divided into two groups: ergatic, directly related to human participation, and factors of a natural-technogenic nature, where human participation is minimized. It was revealed that factors of a natural-technogenic nature have the greatest influence. An algorithm is proposed for a comprehensive assessment of the technical condition and forecasting of operating time both in nominal and in real operating conditions, taking into account factors of a natural and technogenic nature.
It is proposed, based on the developed program for planning and evaluating the life of a mining excavator, to adjust the schedules for maintenance and repair (MOT and R) in order to minimize the number of unplanned downtime of a mining excavator and maintain it in good condition.
32
SON, TRAN CAO, and ENRICO PONTELLI. "A Constructive semantic characterization of aggregates in answer set programming." Theory and Practice of Logic Programming 7, no. 3 (May 2007): 355–75. http://dx.doi.org/10.1017/s1471068406002936.
Повний текст джерелаАнотація:
AbstractThis technical note describes a monotone and continuous fixpoint operator to compute the answer sets of programs with aggregates. The fixpoint operator relies on the notion ofaggregate solution. Under certain conditions, this operator behaves identically to the three-valued immediate consequence operator ΦaggrPfor aggregate programs, independently proposed in Pelov (2004) and Pelovet al.(2004). This operator allows us to closely tie the computational complexity of the answer set checking and answer sets existence problems to the cost of checking a solution of the aggregates in the program. Finally, we relate the semantics described by the operator to other proposals for logic programming with aggregates.
33
Yudina, E. "The Program of Import Substitution in the Cable Industry." Bulletin of Science and Practice 6, no. 3 (March 15, 2020): 304–7. http://dx.doi.org/10.33619/2414-2948/52/37.
Повний текст джерелаАнотація:
The state’s desire in recent years to carry out activities to oust the Russian market of imported goods and various materials and equipment is a positive sign and significant step in the direction of transition of the Russian economy from commodity–monetary to real, based on deep processing of raw materials, but also restore previously lost technologies and the formation of new products and development on the basis of existing scientific and technical potential. Undoubtedly, this is of particular importance, especially in the military-industrial complex-not to be dependent on foreign components, materials and equipment, especially in the conditions of ongoing sanctions. This also applies to such industries as the cable industry, in which the scientific, technical and financial realities of implementing the import substitution policy in the cable industry are important, both on the part of the government and on the part of manufacturers themselves. The article presents the main problems of import substitution in the cable industry. The characteristic of the program and the main activities of EKZ JSC in the framework of import substitution of cable products are presented. Based on the results, a conclusion is made about the role of import substitution in the cable industry.
34
Bushuyev, Sergey, Denis Bushuiev, Victoria Bushuieva, and Natalia Bushuieva. "CONCEPTUAL MODEL OF DIGITAL TRACE OF PROJECTS IN THE CONDITIONS OF DIGITALIZATION OF SOCIETY." Management of Development of Complex Systems, no. 46 (June 24, 2021): 12–18. http://dx.doi.org/10.32347/2412-9933.2021.46.12-18.
Повний текст джерелаАнотація:
The problem of creating an effective conceptual model for the formation of digital footprints of projects and development programs in the context of digitalization is considered. The life cycle of projects, knowledge, and management technologies is significantly shortened and digitization processes create requirements for the creation of their digital footprints and shadows. The technical and technological complexity of development projects increases due to innovation. These trends create significant challenges in the development of project and program management systems in the context of digitalization of society. It is proposed to use genomic representations as a basic model and methodology for the formation of digital footprints of projects. The proposed conceptual model of digital footprint formation of projects allows to take into account the external and internal environment of the project within a certain activity. The formalized model of the carrier of methodology of formation of a digital footprint of the project on the basis of system of knowledge of P2M is resulted. The classes of a hypothetically complete model of project management methodology for genome formation within the digital footprint creation are determined. The algebra of methodology which allows to form complex digital footprints of projects and programs is defined.
35
Zebzeev, V., F. Zekrin, and O. Zdanovich. "FACTOR PROFILES OF FUNCTIONAL AND TECHNICAL FITNESS IN NORDIC COMBINED SKIERS DURING MULTIYEAR PREPARATION." Human Sport Medicine 19, S1 (August 17, 2019): 106–13. http://dx.doi.org/10.14529/hsm19s114.
Повний текст джерелаАнотація:
Aim. The article deals with establishing the differences in the functional and technical fitness of Nordic combined skiers during multiyear preparation. Material and methods. To establish the factor profiles of the functional and technical fitness in Nordic combined skiers, we examined athletes at different stages of multiyear preparation: 40 athletes – initial preparation, 35 athletes – 2-year training program, 40 athletes – more than 2-year training program, 30 athletes – sports performance enhancement. The structure of functional and technical fitness was established with the help of factor analysis. Results. The comparative analysis of the factor structure of functional and technical fitness in Nordic combined skiers revealed the significant differences at each stage of multiyear training. It was established that during the stage of initial preparation and 2-year training program the most important factors are the nervous system (eye-hand visual reaction time, reaction to a moving object, interference resistance) and jumping fitness (angle characteristics during the run-up, take-off, flight, and landing), which create favorable conditions for forming the basics of ski-jumping technique in Nordic combined skiers. After 2-year training program and at the stage of performance enhancement the leading factors of physical fitness are determined by the cardiovascular (the Ruffier test, recovery constant, and Health integral indicator) and respiratory (VO2max, the Shtange's and Hench's breath test) systems, as well as ski racing technique (angle characteristics at different phases), which are favorable for the enhancement of ski racing technique. Conclusions. The results obtained allow the coaches to effectively improve functional and technical fitness and adjust training loads to the specifics of a certain stage of multiyear training.
36
Pinchuk, Tetyana. "METHODICAL APPROACHES TO THE FORMATION OF PROGRAMS OF TELECOMMUNICATION ENTERPRISE DEVELOPMENT IN UNSTABLE BUSINESS ENVIRONMENT." Economic Analysis, no. 27(1) (2017): 212–23. http://dx.doi.org/10.35774/econa2017.01.213.
Повний текст джерелаАнотація:
In modern conditions the problem of developing effective management measures acquires increasing relevance, as well as improving management efficiency in all sectors, especially in the field of telecommunication. One promising line of telecommunication enterprises development is the creation of the programs of development. The article is focused on providing methodical approach to formation of the programs of the telecommunication enterprise development in unstable business environment. It should be formed on the basis of the plan, tree of objectives and evaluation of development programs of a telecommunication enterprise. A program of the telecommunication enterprise development is a set of interrelated programs that is a portfolio of programs, which includes a number of related projects, programs. They are united by a common purpose. The resources for their realisation are allocated. Programs of development are formed by the relevant authorities and individuals and supported and coordinated at all levels of management. It is defined and systematized that programs of telecommunication enterprises development have a number of distinctive features that need to be taken into account when the programs are at the stage of formation. Concurrently, the article specifies that the program of a telecommunication enterprise development consists of a set of interrelated plans (technical, operational and business plans). The tree of objectives, which implies the evaluation of the program and integrated system of formation and implementation of the program of development, is recommended. It allows choosing the most effective approach to the formation of the program of development, taking into consideration both the business environment and specific features of the telecommunication field.
37
Majors, Lauren, and Mary Unangst. "Retrospective Analysis of a Nationwide Telelactation Program." Clinical Lactation 12, no. 2 (May 1, 2021): 91–100. http://dx.doi.org/10.1891/clinlact-d-20-00009.
Повний текст джерелаАнотація:
BackgroundTelelactation is a modality for delivering remote clinical lactation care using telecommunications technology. Sonder Health, in partnership with Amwell, began offering synchronous video telelactation services to health plans and employer groups in 2016.MethodsWe completed a retrospective data analysis on a randomized selection of 1,087 telelactation visits covered by a health plan or employee-sponsored health plan conducted between 2016–2019. Our aim is to describe a telelactation model and review selected visits for technical modalities utilized, clinical workflow, top self-reported chief conditions, patient satisfaction, visit duration, acuity levels, alternative care options, peak visit time, visits conducted during or after business hours, and days visits took place, and discuss the potential for telelactation to bridge the gaps in timely access to IBCLC-level breastfeeding support.ResultsUsing a 5-star rating system, 95% of patients gave a 5-star rating; 52% of visits occurred outside normal business hours. Top three conditions identified: latching (31%), supply (24%), and nipple/breast pain (15%). Without access to the service, 59% reported they would have accessed an urgent care, emergency department, retail health clinic, or other office appointment; 41% reported they would have sought care “nowhere.”ConclusionsThis telelactation program provided access to skilled, comprehensive clinical lactation care and documents a strong use case for telelactation services.
38
Kozorez, Dmitriy, Elena Dolgova, Anna Korneenkova, Alena Rumakina, and Chuang Shi. "Student character building activities as a component of higher education primary educational program." SHS Web of Conferences 137 (2022): 01010. http://dx.doi.org/10.1051/shsconf/202213701010.
Повний текст джерелаАнотація:
The paper provides a solution to the task of implementing student’s character building activities as a component of the main educational program of higher education in a technical university through the common universal competences formation, the educational process is considered as a single focused process of education and training in the interests of a person, family, society and the state, where education is an activity aimed at personal development, creating conditions for self-determination and socialization of the student.
39
Baydakova, N. V., A. V. Afonin, D. Sh Norov, and A. A. Smirnov. "Development of algorithm for implementation of technical condition-based repair program for generating equipment at energy enterprises." Safety and Reliability of Power Industry 14, no. 4 (January 27, 2022): 157–64. http://dx.doi.org/10.24223/1999-5555-2021-14-4-157-164.
Повний текст джерелаАнотація:
The use of modern digital technologies during the industrial revolution enables to revise a number of approaches to the organization of technological processes, in particular when introducing approaches to the implementation of repair programs of energy enterprises. Through the example of the network planning and control system, the use of the overhaul activity schedule for generating equipment is considered, taking into account the logging of asbuilt documentation in a digital system, which is a software and technical complex made up of a centralized data storage system and a decentralized registry. The improvement of equipment, the development of diagnostic tools and methods directly affects the maintenance and repair system. In the maintenance system under development, it is planned to make a transition from statistical empirical assessments of the technical condition of equipment to objective ones based on automated technical diagnostics systems. On the basis of an algorithm for implementing a technical condition-based equipment repair program for energy enterprises, the authors proposed an algorithm for conducting technical supervision and recording the stages of work performed in a distributed register, based on the capabilities of modern digital data collection and processing systems. Obtaining parameter values for further use in the operation of the proposed algorithm is carried out on the basis of the capabilities existing at energy facilities of information-measuring and control systems. The use of the network planning and management system in the form of a network schedule and the algorithm proposed by the authors for conducting technical supervision and recording the stages of work performed during repair activities will make it possible to objectively determine the amount of labor resources necessary to perform the planned scope of work within the specified period, identify critical works delaying the completion of repair, actively manage repair by analyzing the progress of repair work and making reasonable organizational and technical decisions that ensure the performance of work within the planned time frame and at the lowest possible costs.
40
Deptuła, Adam, Piotr Osiński, and Urszula Radziwanowska. "Decision Support System for Identifying Technical Condition of Combustion Engine." Archives of Acoustics 41, no. 3 (September 1, 2016): 449–60. http://dx.doi.org/10.1515/aoa-2016-0046.
Повний текст джерелаАнотація:
AbstractThe paper is a continuation of the publication under the title “Acoustic diagnostics applications in the study of technical condition of combustion engine” and concerns the detailed description of decision support system for identifying technical condition (type of failure) of specified combustion engine. The input data were measured sound pressure levels of specific faults in comparison to the noise generated by undamaged motor. In the article, the whole procedure of decision method based on game graphs is described, as well as the interface of the program for direct usage.
41
Galaev, S. A., and A. Yu Potyupkin. "Regularizing the problem of monitoring the technical state of complex technical objects using program complexes for fuzzy conditional inference systems." Measurement Techniques 53, no. 10 (January 2011): 1102–6. http://dx.doi.org/10.1007/s11018-011-9624-0.
Повний текст джерела
42
Kuligowska, Ewa. "Operating environment threats influence on the maritime ferry technical system safety – the numerical approach." Journal of KONBiN 42, no. 1 (June 1, 2017): 63–74. http://dx.doi.org/10.1515/jok-2017-0018.
Повний текст джерелаАнотація:
Abstract The material given in this paper delivers the procedure for numerical approach that allows finding the main practically important safety characteristics of the complex technical systems at the variable operation conditions including operating environment threats. The obtained results are applied to the safety evaluation of the maritime ferry technical system. It is assumed that the conditional safety functions are different at various operation states and have the exponential forms. Using the procedure and the program written in Mathematica, the considered maritime ferry technical system main characteristics including: the conditional and the unconditional expected values and standard deviations of the system lifetimes, the unconditional safety function and the risk function are determined.
43
Tikhanychev, Oleg Vasilyevich. "Development Management and Project Management: Contrast or Complement?" Программные системы и вычислительные методы, no. 2 (February 2020): 53–68. http://dx.doi.org/10.7256/2454-0714.2020.2.29603.
Повний текст джерелаАнотація:
The subject of this research is the process of developing software for automated control systems. The object of research is the means of organizing software development. A generally recognized promising direction for increasing the efficiency of the use of organizational and technical systems is the automation of their management. A significant share of the effectiveness of any complex technical system is provided by its software. This primarily applies to the application software. The development of application programs is fraught with certain difficulties, primarily of an organizational nature. The generalized analysis showed that in world practice there is a fairly wide range of tools for organizing the program development process. These tools are proposed to be divided into two large groups with respect to the attitude to the process and the degree of detail on "project management tools" and "development controls". Each of the tools is effective for certain conditions of software development. The review article analyzes the factors affecting the effectiveness of the use of a particular tool, synthesized proposals on the expediency of using various control systems in different conditions of the development process. The analysis showed that for the conditions of the development of applied software for automated decision support systems, the most effective is the integrated use of process control automation tools.
44
Bajtoš, Ján, Daniel Lajčin, and Gabriela Gabrhelová. "Teaching Professional Technical Subjects Accepting Current Trends in Field Didactics." Acta Educationis Generalis 10, no. 1 (April 1, 2020): 81–97. http://dx.doi.org/10.2478/atd-2020-0006.
Повний текст джерелаАнотація:
AbstractIntroduction: In the theoretical study, the authors describe current approaches enriching the theory of field didactics concerning teaching technical subjects. They focus on developing the psychomotor dimension of students’ personalities, which they consider to be an important part of the modern young generation’s culture concept. In order to ensure this role in vocational-technical education, it is necessary to innovate the pedagogical preparation of teachers of technical subjects with a focus on achieving the required teaching competences. A part of the presented study deals with the determination, analysis, and representation of individual teaching competences in the doctoral study plan in the conditions of DTI University in Dubnica nad Váhom, Slovakia.Methods: The theoretical study is based on a theoretical analysis of the issues of teaching technical subjects in vocational schools. For the purposes of theoretical analysis, the following research methods have been implemented:- content analysis of the issues of teaching vocational subjects (current innovative trends in field didactics; theories of psychomotor learning; vocational subject teachers);- logical operations (analysis, synthesis, comparison);- generalization and recommendations for the school practice of field didactics.Results: For the development of specialized didactics, it is necessary to take into account the newest results of scientific investigation in general didactics and field didactics; and to apply them in the existing and also new teacher training programs under development as only these facts create new possibilities for improving the quality of education in vocational schools. A consistent development of vocational subject teachers’ teaching competences in the process of their preparation for the teaching profession following current trends and intentions in the field of didactics can become the carrier of positive changes.Discussion: The authors of the study consider it extremely important to accept the latest trends in educational theory in the training programs for teachers of technical subjects. The result of this is the current doctoral study program offered by DTI University in Dubnica nad Váhom, Slovakia, which is organically linked to the master study program Teaching Technical Subjects. In the current academic year, DTI University has been granted the right to conduct habilitation and inauguration procedures in the field of study Didactics based on continuous and successful research activities in the above field with results comparable to the results at an international level and accepted by the professional international community.Conclusions: In the conclusion, the authors of the theoretical study point out that a teacher developing students’ personalities in all directions is the decisive factor in the educational process oriented on efficiency and high-quality results of students. To achieve this effect in the context of vocational schools, it is necessary to reform the training programs for future teachers of technical subjects.
45
Jang, Young-Jun, Hiruyuki Kousaka, and Noritsugu Umehara. "MNS-15 NANOSCALE FRICTION BEHAVIORS OF HIERARCHICAL SUPERHYDROPHOBIC STRUCTURE OF DIAMOND LIKE CARBON FILMS WITH VARIOUS HUMIDITY CONDITIONS(Micro/Nanosystem Science and Technology IV,Technical Program of Oral Presentations)." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2009 (2009): 193–94. http://dx.doi.org/10.1299/jsmemipe.2009.193.
Повний текст джерела
46
Demin, Vladimir, Alexander Tomilov, and Bakhyt Sultanova. "Automation of the Design of the Anchorage System Taking into Account the Geomechanical State of the Massif and Mining Development Schemes." MATEC Web of Conferences 155 (2018): 01023. http://dx.doi.org/10.1051/matecconf/201815501023.
Повний текст джерелаАнотація:
The article presents the system for the automation of the design of the anchorage, which regulates the calculation of the required parameters of the fasteners for the fastening of the fastening system. The main factors affecting the operation of the anchor support are grouped in the following way: mining and geological conditions, technical characteristics of the anchor support, geomechanical conditions for conducting and operating the mine workings. Mining and geological conditions for carrying out excavations include: physical and mechanical properties of rocks, the category of roof stability, fracturing, etc. Technical characteristics of the anchor support: material of the rod, filler, filling completeness, etc. Conditions (geomechanical) of carrying out and exploitation of the mine workings: the depth of the conduct, the location relative to the zone of influence of the cleaning works, the location relative to the waste zone, etc. As a result of calculations the program gives out the basic parameters of the anchor support, which coincide with the parameters adopted by the passport.
47
Imanbaeva, А. А., I. F. Belozerov, G. G. Gassanova, and A. S. Ondasynova. "MAIN RESULTS OF SOFTWARE DEVELOPMENT FOR GREEN CONSTRUCTION IN ARID CONDITIONS MANGISTAU." Landscape architecture in the globalization era 3 (2021): 5–19. http://dx.doi.org/10.37770/2712-7656-2021-3-5-19.
Повний текст джерелаАнотація:
In Mangystau, there is an acute problem of comparative assessment of the overall decorative effect of green devices in the system of a specific natural and urban landscape, which the Mangyshlak Experimental Botanical Garden (MABS) has been dealing with for the last 6 years as part of the scientific and technical programs "Innovative potential of botanical gardens of Kazakhstan as a scientific and practical basis for the conservation and balanced use of biological diversity in the arid conditions of the Mangystau desert". The description of the special computer program "PLANT-EST-KZ" developed at the MIEB is given, the database of which currently includes the most complete information about 94 green devices of residential and industrial zones of 5 settlements of the Mangystau region of 13 types. The decorative significance of the signs was determined by the results of a detailed survey of plantings, during which functional zones, types of compositions, age and height of woody plants, tiering of plantings, species composition, areas under woody vegetation, flower beds, rose gardens and lawns, the number of memorable (cultural) objects were identified. A comprehensive scale for assessing the aesthetics of green devices, compiled in relation to the arid conditions of Mangystau, is proposed, taking into account 37 structural, commemorative, ecological, biological and agrotechnical characteristics of garden and park objects. A comparative analysis of the aesthetics of green devices for various functional purposes is given. The introduction of the developed program into the practice of green construction will become the basis for an objective assessment of the decorative nature of the landscaping plantings of Mangystau and the development of effective measures for the reconstruction of existing and the creation of new garden and park plantings.
48
Vanchukhina, Lyubov, Tatyana Leybert, Anastasia Rogacheva, Yulia Rudneva, and Elvira Khalikova. "New model of managerial education in technical university." International Journal of Educational Management 33, no. 3 (April 8, 2019): 511–24. http://dx.doi.org/10.1108/ijem-08-2018-0270.
Повний текст джерелаАнотація:
Purpose A modern trend in the educational environment in recent years has been the permanent education system with the involvement of online study modes. It is based on multidisciplinarity and adaptivity of educational technologies, starting with the basic level of education – bachelor’s degree, and ending with gaining competences in the field of engineering and economics throughout the whole professional life of a student. The purpose of this paper is to perform a detailed analysis of development of permanent education in Russian universities, focusing on statistical data on popularity of jobs as to professional groups among employers and determining peculiarities of permanent education, based on the distinguished peculiarities of permanent education and requirements of business to develop a model of engineering and managerial education that would integrate two blocks of the educational process – engineering and economic, as well as include modern technologies of teaching. Design/methodology/approach The authors propose the modern model of engineering management education that is implemented in the Russian technical universities. Its distinctive feature as compared to the conventional educational technologies is gaining competences in the field of economics and management at the same time with engineering education at the second stage of education – the master’s program. The proposed model of engineering and management education results in obtainment of two diplomas by the student who is awarded with a master’s degree in engineering and a master’s degree in economics. A difference of the offered model from the traditional educational technologies is obtaining competences in the sphere of economics and management together with engineering education at the master’s program. The result of the offered model of engineering and managerial education is graduate’s receiving two diplomas with master’s degree of engineer and master of economics. The paper shows the existing mechanism of implementing the model of engineering and economic education in a technical university by the example of the master’s program in Economics “Evaluation of economic risks during technological decisions (in oil processing and oil chemistry).” Findings The offered model of engineering and managerial education will allow training the engineers of a new type, who will be able to adapt to new tendencies and initiate the changes that are necessary for effective functioning of business in the conditions of digital economy. Originality/value The offered model of engineering and managerial education should be acknowledged as an innovational educational project that raises demand for graduates through their adaptability to employer’s needs and their usage of new tools of management that are based on exchange of information data and that form managerial task for information provision of the process of decision making and their further execution.
49
Degtyarev, George V., Kirill A. Belokur, and Irina V. Sokolova. "Modeling of the Building by Numerical Methods at Assessment of the Technical Condition of Structures." Materials Science Forum 931 (September 2018): 141–47. http://dx.doi.org/10.4028/www.scientific.net/msf.931.141.
Повний текст джерела
50
Lukіianchuk, Alla, Vira Kharahirlo, Oleksandr Sakhno, Galyna Tataurova-Osyka, and Nadiіa Stadnik. "Conditions for the development of psychological and pedagogical competence of teachers of vocational (professional and technical) education." Linguistics and Culture Review 5, S3 (October 22, 2021): 678–96. http://dx.doi.org/10.21744/lingcure.v5ns3.1552.
Повний текст джерелаАнотація:
The urgency of the research problem is due to the need to improve approaches to the development of professional competence of teachers and insufficient development of theoretical, practical and scientific-methodological aspects of creating conditions for psychological and pedagogical competence of teachers of vocational education in the system of continuing education. The conditions of the development are characterized as a set of motivation of professional activity and readiness for innovative activity. The program of the School of Pedagogical Coaching was developed on the basis of the diagnostic study of the peculiarities of the conditions for the development of psychological and pedagogical competence. The purpose of the article is to determine and study the conditions of development of the psychological and pedagogical competence of teachers of professional (vocational) education in the system of continuing education. The leading method of empirical research of this problem is a questionnaire, which allows to cover a significant number of respondents in different regions of Ukraine and analyze in detail the conditions for the development of psychological and pedagogical competence of teachers such as motivation and readiness for innovation activity.