Дисертації з теми "Produit connecté"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Produit connecté".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Briard, Tristan. "Des données captées aux créations de valeurs : Proposition d’une méthode outillée pour structurer la conception amont des produits intelligents et connectés." Electronic Thesis or Diss., Paris, HESAM, 2023. http://www.theses.fr/2023HESAE095.
Recent advances in information and communication technologies and data science have led to the development of smart connected products. These products have new capabilities that create value for both the user and the manufacturer. These developments are leading to a major paradigm shift. To take full advantage of the potential of smart connected products, manufacturers need to adopt new processes, especially in the design phase. Indeed, the choice of data that can be captured by the product at the design stage defines the potential value creation for the rest of its life cycle. The aim of this thesis is therefore to formalise a methodological structure to guide designers in the integration of value creation based on captured data. In order to propose a relevant and effective method, we first explore the challenges related to design and captured data. Based on the challenges identified, a method is then constructed. It is structured in two phases, each supported by a dedicated tool. The first phase is a creativity phase that systematically generates potential value creation based on captured data. The second phase is a decision-making phase in which the previously generated value creations are systematically ranked according to sustainability criteria. Experiments have validated the relevance and effectiveness of the proposed methodology. Through the method and its tools, this thesis work contributes to scientific and industrial research supporting the paradigm shift brought by digital technologies in product design
Sundén, Lina. "Designing Revenue Models for Smart, Connected and Integrated Product-Services." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-64469.
Clark, Laura L. "Design and Testing of a Quick-Connect Wheelchair Power Add-On Unit." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/30289.
Ph. D.
Weaver, Stephen T. "Connected Consumers: Cognizance of Provision Networks in Mundane Consumption." Digital Archive @ GSU, 2011. http://digitalarchive.gsu.edu/marketing_diss/22.
Manion, Kendall. "A Lexicographic Product Cancellation Property for Digraphs." VCU Scholars Compass, 2012. http://scholarscompass.vcu.edu/etd/2932.
Wilberg, Julian [Verfasser]. "From data to value: facilitating strategy development for connected products / Julian Wilberg." München : Verlag Dr. Hut, 2020. http://d-nb.info/1219475327/34.
PINTO, LAURA DE SOUZA COTA CARVALHO SILVA. "RELATIONAL DESIGN: A WAY TO CONNECT, VIABILITY AND RECOVERY OF HANDCRAFTED FOOD PRODUCTS IN BRAZIL." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=27463@1.
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTS. DE ENSINO
Para que possamos verdadeiramente avançar em termos de sustentabilidade se faz necessário uma mudança mais profunda de paradigma e comportamento. Sob essa reflexão, este trabalho busca contribuir para a discussão sobre novas formas de valorização e comercialização de produtos alimentícios tradicionais oriundos de pequenos produtores no Brasil. Isso porque, o modelo industrial, pautado na produção de mais do mesmo por unidade de tempo, tomou conta de quase todas as esferas produtivas da sociedade, e mesmo a agricultura passou a ser realizada sob essa ótica. No entanto, as produções artesanais não deixaram de existir, contudo, os produtores passaram a enfrentar desafios para produção, distribuição e comercialização de seus produtos. Nesse cenário, infelizmente, muitos produtores rurais têm acesso restrito ao mercado, e quando o fazem, na maioria das vezes, é de maneira informal, instável e desvalorizada. A incerteza desse processo de comercialização inviabiliza a perpetuação da atividade e, consequentemente, a permanência da família no campo. Este trabalho tem como foco o processo de comercialização da agricultura familiar brasileira, pautada na produção em baixa escala. O estudo foi desenvolvido com o objetivo de compreender como o design contribui para minimizar a fragilidade de comercialização desses produtos alimentícios artesanais, melhorando o escoamento da produção de pequenos produtores rurais, valorizado seus produtos e contribuindo para a sustentabilidade da família no campo a partir de sua atividade econômica principal. Metodologicamente, o trabalho foi realizado a partir de estudo e reflexão teórica, que subsidiaram uma experimentação empírica no caso do empório De-Lá. Os resultados confirmam que é possível romper com a lógica de desvalorização de produtos artesanais brasileiros, utilizando o design para projetar condições que contribuam para o desenvolvimento de modos relacionais humanos mais dialogais e menos discursivos, de maneira a valorizar territórios produtivos (seus produtos, pessoas e tradições) através da aproximação interpessoal. Através da experimentação empírica constatou-se que redes mais fortes e justas entre produtores e consumidores podem ser desenvolvidas, quando há mais informações disponíveis e os canais de comunicação estão abertos. Além disso, averiguou-se que novos modelos de negócio, pautados na prevalência de relações pessoais às comerciais, são possíveis. Isso em escala artesanal, já que na industrial as relações já estão cristalizadas. Conclui-se com a compreensão de que o design pode ser utilizado não apenas em demandas industriais, nas quais já está consolidado, mas também para criar espaços e sistemas que contribuam para maior aproximação interpessoal e o diálogo, aumentando as chances para que o modo relacional Eu-Tu, ou seja relações mais próximas e afetivas, possa acontecer.
In order to move forward in terms of sustainability is necessary a profound paradigm and attitude change. Based on this, the current study seeks to contribute on new forms of appreciation and marketing of traditional food products from brazilian small producers. The industrial model based on more productivity dominated all market, and even agriculture. Despite of this scenario the craft production has persisted and they have faced challenges on producing, distributing and selling their products. Unfortunately, many farmers have restricted access to the market, and when they do, commonly is informal, unstable and devalued way. This doubtful market prevents the maintenance of the agricultural activity and then the family to stay in the rural area. The main goal of this study is the selling process of the Brazilian family farming, based on the production on a small scale. The study was developed in order to understand how the design contributes to minimize the fragility of artisanal food products selling. This may improve the flow of small farms production contributing to rural area family sustainability and keep their products as their main economic activity. Methodologically, the study was conducted from theoretical reflection, which was supported by empirical experimentation of De-lá emporium case. The results confirm that is possible to rupture with the logic of devaluation of Brazilian craft products, using the design to contribute to the development of human relational modes more dialogue and less discursive. Consequently, it will enhance productive territories (its products, people and traditions) through interpersonal approach. It was observed that strongest and fair networks between producers and consumers can be developed when more information is available and the communication channels are opened. In addition, it was established in artisanal scale that new business models, guided by the prevalence of personal relations to business are possible since in industrial scale they are already defined. In conclusion, we can note that the design can be used not only in industrial demand where it is already consolidated, but also to create spaces and systems to contribute to greater interpersonal approach and dialogue, increasing the chances of closer and intimate relationships.
Chaher, Yosra. "Cadre d'ingénierie pour l'innovation ouverte : application en santé connectée." Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30121.
Faced with many challenges, competitive organizations today are those that quickly transform new ideas into new products or services. This is why they are seeking to better control their innovation process and make it more efficient across all functions of their value chain, from the idea generation phase to their launch. In addition, over the past 15 years, large companies have opened up their innovation processes due to the need for shorter innovation cycles and shorter time to market. However, we note that there is virtually no formal approach in the literature related to innovation modeling that streamlines the management of the so-called "open" innovation process. In this context, we are developing a methodological framework by targeting the open innovation process in order to formalize it and rationalize its management. The Model-Driven Engineering approach implemented allows us to propose a formal approach to properly structure the management of open innovation. To this end, our research focused initially on the design of a conceptual model that describes the knowledge included in the scope of open innovation management through formalization in UML. This conceptual model is considered the reference base of our methodological framework since it is generic and can be applied to any type of innovation. Then, we proposed a life cycle model that describes the process of open innovation, based on collaboration and exchange between the different actors. We have detailed this model into collaborative business processes using BPMN diagrams to describe operational activities, and DMN diagrams to frame decision making activities. Finally, we illustrated this methodological framework on two case studies related to the field of connected health, in order to test its validity
Chandrappa, Kori Vinay Kumar, and Ganesan Gowtham Prasath Radhakrishnan. "Design optimization and testing of electrical connector for low voltage transmission cabinets : In collaboration with ABB AB Kabeldon." Thesis, Högskolan i Halmstad, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-40761.
Ngorsuraches, Surachat. "The effects of inflation, utilization, prescription size, and product mix on prescription drug expenditure changes in a health maintenance organization (HMO)." Madison, 2002. http://www.library.wisc.edu/databases/connect/dissertations.html.
Krüßmann, Martin, and Karin Tischler. "Complexity Management to design and produce customerspecific hydraulic controls for mobile applications." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-200692.
Raymann, Roman. "Digitisation & Lean Manufacturing : Changes in Manufacturing when the Products are getting Smarter and Connected." Thesis, Högskolan i Gävle, Industriell ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-27569.
Fenille, Marcio Colombo. "Mergulho de produtos de esferas e suas somas conexas em codimensão 1." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/55/55135/tde-29042007-141846/.
We study initially results of classification of difeomorfisms of Cartesian products of spheres of same dimension. Treated this, we study the smooth embeddings of cartesian products of three spheres, being the first one of dimension one and excessively of bigger or equal dimension to one, with the dimension of the last equal greater or of second, in a sphere in codimension one, and search the total characterization of the latch of the two connected components of complementing of such embeddings. We deal with special approach the embeddings of the product to three spheres to dimension one in the sphere dimension four, and, finally, we study problems of classification of PL locally unknotted embeddings of connected sums of torus on codimension one.
Tomas, Adam. "Product Digitalization from the Perspective of an Established Manufacturing Firm." Thesis, Linnéuniversitetet, Institutionen för informatik (IK), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-104945.
Ekerå, Malin, and Sophie Hallbert. "The Intermediation Functions Connected to the Phases of a New Product Development Process : An Investigation of a Public and a Private Intermediary in a Micro Perspective." Thesis, Linköpings universitet, Projekt, innovationer och entreprenörskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119223.
Bouldin, John Conrad. "Methodology for the Visual Inspection of Selected Engineered Wood Products and Connector Hardware for Prescriptive Non-Compliance at the Pre-Drywall Stage of Residential Construction." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/28448.
Ph. D.
Ben, Gdara Sarra. "Etude des déclenchements intempestifs des produits différentiels." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENT032.
The Residual Current Device (RCD) must ensure the continuity of service which means that no default other than those that can put the user at risk should make the product trigger, to avoid any inconvenience (freezer not supplied) or a financial loss (non-operation of a photovoltaic). The measurement function is made up of:- A torus for measuring the residual current, it naturally carries the sum of currents entering and exiting the installation- A plate shaping (filtering)- An actuator, the polarized relay which sets the threshold of the device (through its power of initiation) and provides mechanical energy to turn off power supply.These false triggering are caused by defaults initiated among the measurement chain. We can cite three main reasons:- Residual current too high (over-voltages on electrical network by common mode)- Radiated Magnetic Fields (current through the primary circuit of the torus)- Balancing the torus (differential mode) (current through the primary circuit of the torus)As the atmospheric over-voltages are considered to be the most critical disturbances, they will appear as the principal subject of this thesis. The main issue is the behavior of the RCD facing a lightning stroke. So, a well understanding of the manner that it will respond in such situations is necessary. The objectives of this study are to:- Establish a temporal model of lightning stroke- Highlight the different working phases in front of a lightning stroke- Establish a RCD's behavioral model adapted to every phase- Highlight the causes of unwanted triggers- Propose solutions enabling our products to not trigger by default and so improve the reliability of their functioning- Reduce customer returns
Welling, Sebastian. "Assessing the Social Performance of Products: Developing a Set of Indicators for Vattenfall AB Connected to the International EPD® system." Thesis, Uppsala universitet, Institutionen för geovetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-197717.
Vasconcelos, Ana Klyssia Martins. "Caracterização de gestão de produtos de software nas universidades federais brasileiras." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/100/100131/tde-21052018-162205/.
Electronic Government or e-Government is an initiative that provides services to groups of users through an electronic system. Among these users may be other governments, public and private organizations, tourists, and citizens. When analyzing the wide use of Internet resources and the development of software driven by the complexity of the amount of information, there is a need to evaluate the directions of e-government. In this sense, Software Product Management (GPS) emerges as a driving force for success in software products, as it covers the entire lifecycle development, ensuring a technical and business perspective, which, with its many interfaces, business and stakeholders throughout the life cycle of a product. In this context, the general objective of this work is to investigate the actors and business functions of Brazilian federal universities in meeting ICT demands, identifying the differences and similarities with the actors and processes defined by GPS reference models defined in the literature. In addition, a GPS model adapted to the context of public universities is proposed. The whole methodological process of this study was based on a set of 5 steps, started from a systematic review. Among the results of this work are a case study that explains the context of software development in federal universities from the perspective of GPS; the construction of a research instrument to capture the state of GPS practice in federal universities; definition of an initial GPS model for e-government in the higher education sector, and a set of best practice recommendations suggested to implement GPS activities efficiently
Gnanguenon, guesse Girault. "Modélisation et visualisation des liens entre cinétiques de variables agro-environnementales et qualité des produits dans une approche parcimonieuse et structurée." Electronic Thesis or Diss., Montpellier, 2021. http://www.theses.fr/2021MONTS139.
The development of digital agriculture allows to observe at high frequency the dynamics of production according to the climate. Data from these dynamic observations can be considered as functional data. To analyze this new type of data, it is necessary to extend the usual statistical tools to the functional case or develop new ones.In this thesis, we have proposed a new approach (SpiceFP: Sparse and Structured Procedure to Identify Combined Effects of Functional Predictors) to explain the variations of a scalar response variable by two or three functional predictors in a context of joint influence of these predictors. Particular attention was paid to the interpretability of the results through the use of combined interval classes defining a partition of the observation domain of the explanatory factors. Recent developments around LASSO (Least Absolute Shrinkage and Selection Operator) models have been adapted to estimate the areas of influence in the partition via a generalized penalized regression. The approach also integrates a double selection, of models (among the possible partitions) and of variables (areas inside a given partition) based on AIC and BIC information criteria. The methodological description of the approach, its study through simulations as well as a case study based on real data have been presented in chapter 2 of this thesis.The real data used in this thesis were obtained from a vineyard experiment aimed at understanding the impact of climate change on anthcyanins accumulation in berries. Analysis of these data in chapter 3 using SpiceFP and one extension identified a negative impact of morning combinations of low irradiance (lower than about 100 µmol/s/m2 or 45 µmol/s/m2 depending on the advanced-delayed state of the berries) and high temperature (higher than about 25°C). A slight difference associated with overnight temperature occurred between these effects identified in the morning.In chapter 4 of this thesis, we propose an implementation of the proposed approach as an R package. This implementation provides a set of functions allowing to build the class intervals according to linear or logarithmic scales, to transform the functional predictors using the joint class intervals and finally to execute the approach in two or three dimensions. Other functions help to perform post-processing or allow the user to explore other models than those selected by the approach, such as an average of different models.Keywords: Penalized regressions, Interaction, information criteria, scalar-on-function, interpretable coefficients,grapevine microclimate
Wilberg, Julian Malte Maximilian Verfasser], Udo [Akademischer Betreuer] [Lindemann, Udo Gutachter] Lindemann, Albert [Gutachter] [Albers, and Johannes [Gutachter] Fottner. "From data to value: facilitating strategy development for connected products / Julian Malte Maximilian Wilberg ; Gutachter: Udo Lindemann, Albert Albers, Johannes Fottner ; Betreuer: Udo Lindemann." München : Universitätsbibliothek der TU München, 2020. http://nbn-resolving.de/urn:nbn:de:bvb:91-diss-20200108-1468778-1-8.
Wilberg, Julian Malte Maximilian [Verfasser], Udo [Akademischer Betreuer] Lindemann, Udo [Gutachter] Lindemann, Albert [Gutachter] Albers, and Johannes [Gutachter] Fottner. "From data to value: facilitating strategy development for connected products / Julian Malte Maximilian Wilberg ; Gutachter: Udo Lindemann, Albert Albers, Johannes Fottner ; Betreuer: Udo Lindemann." München : Universitätsbibliothek der TU München, 2020. http://d-nb.info/1211086976/34.
Jin, Lihua. "Rhétorique contrastive de l’écrit académique : étude contrastive de textes produits par des scripteurs apprenants et des scripteurs natifs." Thesis, Sorbonne université, 2020. http://accesdistant.sorbonne-universite.fr/login?url=http://theses.paris-sorbonne.fr/2020SORUL035.pdf.
This study seeks to approach the teaching of L2 writing in the textual linguistics context. From the perspective of contrastive rhetoric, the study focuses on the dimension of argumentation and the cohesive dimension of texts produced by different groups of writers. In the view of comparative discourse, this study aims to analyze texts written by speakers of two groups of writers, including Asian L2 learners and native French writers. The texts gathered are submitted to the examination of the argumentative scheme (topoï), the relation of connexity and the thematic progression. Compared to texts produced by native writers, what characterizes the texts produced by L2 learners can be summed up in: 1. The extrinsic topos is prevailed in terms of argumentative warrant (topoï). 2. The topoï is defective in number; the absence of topos is repetitive and unpredictable. 3. The high rate of the absence of semantic relation is problematic for the text comprehension. Plus, the dependence on the simple addition relation does not help the interpretation of the text. 4. The linguistic realization implemented for textual cohesion is irrelevant with the logico (semantic) relation identified. 5. The variety of cohesion markers used is restricted. 6. The case of thematic break is more important; The frequent case of a thematic rupture calling for other successive thematic breaks. 7. An occurrence of thematic break is preferably followed by a non-linear progression. 8. The distance between the thematization and the initial reference element is relatively remote
Nygårds, Erik, and Martin Oliw. "Utformning och installation av internetuppkopplad datalogger för kontinuerlig sintringsugn : Utveckling och implementation av Raspberry Pi baserad internetupkopplad datalogger, samt framtagning av lösningsförslag för viktmätning." Thesis, Linköpings universitet, Maskinkonstruktion, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-176753.
PERSSON, ALEXANDER. "Internet of Things and connected home living : -A case study on how manufacturing firms in thekitchen and furniture industry is implementing and developing IoT products and services." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232442.
Jaworska, Persson Alexander. "Internet of Things and connected home living : - A case study on how manufacturing firms in the kitchen and furniture industry is implementing and developing IoT products and services." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209844.
Yan, Steven Longfei [Verfasser], and A. [Akademischer Betreuer] Albers. "Vernetzte Validierungsumgebungen – ein Beitrag zur Validierung im verteilten Produktentwicklungsumfeld auf Basis des IPEK-X-in-the-Loop-Ansatzes am Beispiel der Antriebssystementwicklung = Connected Validation Environments – A Contribution to Validation in a Distributed Product Development Environment Based on the IPEK-X-in-the-Loop-Approach Using the Example of Powertrain System Development / Steven Longfei Yan ; Betreuer: A. Albers." Karlsruhe : KIT-Bibliothek, 2021. http://d-nb.info/1235072428/34.
Zindine, El Mostafa. "Etude de la résistance à la corrosion de quelques métaux et alliages susceptibles d'être utilisés en connectique sans traitement de surface préalable." Besançon, 1987. http://www.theses.fr/1987BESA2029.
Kvasnička, Karel. "Mobilní zdroje elektrické energie." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413211.
Hung, Nguyen Viet, and Nguyen Viet Hung. "Innovation on Marketing strategy for Mobifone’s Fast Connect product." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/20370998025041777129.
龍華科技大學
商學與管理研究所
100
Understanding trend in development of mobile and telecommunication market in Vietnam, in the beginning of October 2010, Vietnam Mobile Telecom Services Company - Mobifone has supplied 3G telecommunication service, included strategic product line - FastConnect - which supplied means of Internet access from computer. However, until now, revenue from FastConnect product line has still been low and not satisfied initial expectation and investment. Thus, the thesis titled “ Innovation on Marketing strategy for Mobifone’s FastConnect product of Mobifone” is carried out. The thesis researches Marketing theory, actual situation of FastConnect product business by Mobifone, behavior and habit of FastConnect product use,,,, evaluation on FastConnect product of customers who have used FastConnect product. The thesis researches general theory on Marketing strategy in general and Marketing Mix (4P) in particular, pointing out important role of strategy of product differentiation in Marketing strategy; researching theories as basis for practical research on Mobifone customer groups. The practical research is carried out by collecting information from 200 customers who have used FastConnect product through questionnaire which focuses on customers’ behaviors, habit of use, evaluation and satisfaction (according to score from 1-5) on FastConnect product. Information collected from 200 customers shall form a sample which is analyzed and evaluated through SPSS statistic descriptive software which applies 2 key methods: • Statistics description of data: frequency, average, standard deviation… • Lineal recurrence method. The thesis has obtained some results as: pointing out important role of Marketing strategy, customers’ satisfaction on model of FastConnect equipment (averagely 3,48), service quality (3,47), call charge (3,67), or some distribution channels which customers desire on the most such as: online purchase or shops. Particularly, criteria of multi-purpose products are very important. The thesis has offered the lineal recurrence model on “customers’ satisfaction” on FastConnect product. Thereby, comprehensive, creative and active Marketing strategy on FastConnect product shall be given. In general, the thesis has obtained some proposed purposes, recommending Marketing policies on innovation of FastConnect product on each customer segmentation. Vietnam Mobile Telecom Services Company can consider such recommendations as basis of reasonable Marketing strategy for FastConnect product.
Van, Han-Sen, and 范漢森. "Connector-based research product recovery planning disassembly." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/22908863710973772303.
國立勤益科技大學
工業工程與管理系
102
People use discarded after the end of the relevant product, if recovery through effective product, on the one hand reduce the waste of resources; help protect the environment, on the other hand to improve the effectiveness of product recalls, in past studies seem to connector-based product disassembly planning less, therefore, this study is based on past literature proposes connector-based product disassembly planning, improving the effectiveness of recycling waste products. This paper presents the release of clustering process (Release Grouping Procedure, RGP) method Connector distinction, trying to simplify the complexity of the product disassembly planning. On the other hand can be to assess the value of dismantling Connector , there will be no dismantling value Connector choose not to disassemble, reduce unnecessary dismantling costs in order to improve the overall product recovery efficiency.This study was to verify the feasibility of disassembling Connector based planning, so will do total disassembly and selective disassembly planning.First, do total disassembly planning to build the release diagram and breadth-first search and then use the Forward phase heuristic to seek out the best solution, after cost estimates for the Connector, and then the non-economic Connector for design improvements to improve product recovery efficiency. After the completion of the total disassembly planning, then selective disassembly planning established demolition selected release diagram, do the same with total disassembly planning process step, the final selection results selective disassembly planning will choose not to have economic Connector , the product can be reduced unnecessary waste disassembly process, helps to improve product recovery efficiency.
Lyu, Shao-Hong, and 呂紹鴻. "Connector-based disassembly sequence planning for product recycling." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/32614200078656368711.
國立勤益科技大學
工業工程與管理系
97
Many businesses build their own system to handle the End-of-Life product to satisfy the rising eco-awareness and to face the fact of limited resource. Disassembly planning should be considered seriously. Disassembly means to remove the connectors among parts so that parts can be independent from others. It makes the business be able to adopt the optimal strategy of processing these independent parts. Connector concept focuses how parts combine with each other. It consists of related information such as combination, tool, and direction. Combination and tool will determine the basis of cost. In addition, the sequence of removing connectors depends on the information of direction. The concept of connectors not only simplifies the representation of disassembly relation, but also reduces the complexity of the searching task. On the basis of connector information, release diagram will be built according to interference matrix of release direction. In addition, using modified Breadth-First-Search method to explore the release diagram features speed and flexibility. Finally, a stapler and electric fan were used as practical examples to illustrate the possibility of proposed methodology.
Hsieh, Hui-Ling, and 謝惠玲. "A study of the Go/No Go in connector product." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/93680244152646979528.
國立屏東科技大學
機械工程系所
100
This study aimed to develop a surface measuring system which with low prime cost, easy to operate and high precision. It applied the vision of machines, image processing and other technologies , coordinates of displacement and rotation principle , to measure the connector leads. The measure item was connector leads. This framework of experiment could be separated into three sections: the CCD video camera, lighting system and self-developing measurement software. connector on the edge of the reference edge, the middle of the quadrangle center anchor, foot center for the reference to the origin, you can locate the other foot position, CCD camera to take images, and Precision measurement of its relative position. It could reach the requests of the proprietors after measuring to increase the accurate in measurement, shorten the measure time and reduce the human resource.
Hierro, João Nuno Ribeiro. "Product Design of Managed Services for a Connected Vehicles Startup." Master's thesis, 2017. https://repositorio-aberto.up.pt/handle/10216/106757.
Hierro, João Nuno Ribeiro. "Product Design of Managed Services for a Connected Vehicles Startup." Dissertação, 2017. https://repositorio-aberto.up.pt/handle/10216/106757.
Chang, Tang-Sheng, and 張堂聖. "Connector-Based Modular Research for The Mechanical Products." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/74388416615985227366.
大葉大學
工業工程研究所
90
Traditions modular research is used the Liaison Graph to represent the connected of parts. This methodology that only has a relation of parts does not have enough information to handle the manufacturing. In order to achieve the objective of manufacturing, this study adopts Connector-Base concept to represent a product in a function viewpoint. The structure attribute of a Connector which contains fastener, direction, disassembly tool and parts is adopted in this study. In the other hand, this study also adopts a concept which is Design for Variety to respect the requirement of customers in a variety viewpoint. This variety information is the major criterion of modular research for manufacturing products. The algorithm of modular product is Gomory&Hu algorithm which considers the variety information. Finally, using the manufacturing information assign the parts to the Connectors. The major characteristic of this study is considering function, variation and manufacturing viewpoint in a modular process. The factors of this study could yield the modular result to apply in manufacturing products. Key Words: modularity, Liaison Graph, Connector, product variety,Gomory&Hu Algorithm
Zhao, Fan. "Shape feature definition and recognition in internet-based product design /." 2001. http://www.library.wisc.edu/databases/connect/dissertations.html.
Uribe, Bernardo. "Twisted k-theory and orbifold cohomology of the symmetric product /." 2002. http://www.library.wisc.edu/databases/connect/dissertations.html.
Simangunsong, Bintang C. H. "International demand and supply for forest products, with applications to the tropical timber products trade." 2001. http://www.library.wisc.edu/databases/connect/dissertations.html.
Jen, Kai Peng, and 彭人愷. "A Study on the Selling Service Model for Cable and Connector Product." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/f77vky.
國立臺北科技大學
管理學院EMBA大上海專班
106
There has been increasingly strong competition in the industry of high-tech electrical products. Competition is even tougher among companies in this area compared with other industries. The challenge comes from the fact thatnew products are launched with short product lifecycle, raw material and key supply base resourcesare with constraints, and there is always demand dynamic from customers. In the meanwhile, with continuous development of few decades,China now is the global leader for product manufacturing. Discussion and research on the B2C model has been one of the main topics. There are fewer study and research in the area of industrial products, especially industrial electrical products. Most of the research on industrial product marketing are based on the perspective of supply side. This research takes a different approach to analyze customer requirement and behavior. Based on the perspective of actual requirement and demand from customers, the study is conducted among end customers of different industries. Analysis is mainly focus on the demand coming from customer side rather than from supply side. We propose a new sales and service model for wire harness product marketing. Through this model, our target is to provide a more efficient and effective way of working for customers from different industries.
Nogueira, Luís Eduardo Santos Costa. "Utilização de Business Intelligence com Smart Connected Products: Estudo qualitativo." Master's thesis, 2017. https://repositorio-aberto.up.pt/handle/10216/108218.
Nogueira, Luís Eduardo Santos Costa. "Utilização de Business Intelligence com Smart Connected Products: Estudo qualitativo." Dissertação, 2017. https://repositorio-aberto.up.pt/handle/10216/108218.
Berti, Andrew D. "From sequence to structures : mining Pseudomonas syringae genomes for natural product discovery /." 2009. http://www.library.wisc.edu/databases/connect/dissertations.html.
Gaunt, Kevin. "Connecting Cameras : Putting a New Twist on Connected Consumer Electronics." Thesis, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-126477.
Zimmerman, Noah P. "Host intestinal modulation by tapeworm secreted products /." 2003. http://www.library.wisc.edu/databases/connect/dissertations.html.
Bloss, Matthew M. "Partition algebras and permutation representations of wreath products." 2002. http://www.library.wisc.edu/databases/connect/dissertations.html.
Petrosyan, Nansen. "Jumps in cohomology of groups, periodicity, and semidirect products." 2006. http://www.library.wisc.edu/databases/connect/dissertations.html.
Tanyu, Burak F. "Working platforms for flexible pavements using industrial by-products." 2003. http://www.library.wisc.edu/databases/connect/dissertations.html.
Ünlü, Özgün. "Constructions of free group actions on products of spheres /." 2004. http://www.library.wisc.edu/databases/connect/dissertations.html.
Gerasyuto, Aleksey Igorevich. "Development of intramolecular aza- [3 + 3] annulation reaction and its applications in natural product synthesis." 2007. http://www.library.wisc.edu/databases/connect/dissertations.html.