Дисертації з теми "Product life cycle Australia"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Product life cycle Australia".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Wright, Lucy. "Product life cycle management." Thesis, University of Surrey, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301674.
Повний текст джерелаUsanmaz, Gokhan. "End-of-life cycle product management." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/8736.
Повний текст джерелаIncludes bibliographical references (leaves 75-77).
Market leadership requires effective management of product life cycle, starting from the launch of a new product until its retirement. In this particular project, an exploratory study of business practices in the management of products in the decline phase and the eventual decision of product abandonment is conducted through surveys and interviews of senior executives from Fortune 500 companies, focusing mainly on food, networking equipment, medical devices, consumer electronics and retail industries. Actual names of the companies are not revealed for confidentiality reasons. Also, the implementations, assumptions and level of acceptance of decision support system (DSS) modules on product lifecycle management are analyzed. Finally, companies' business processes are compared and enhancements to current DSS systems are proposed.
by Gokhan Usanmaz.
M.Eng.
Karlsson, Charlie. "Innovation adoption and the product life cycle." Doctoral thesis, Umeå universitet, Institutionen för nationalekonomi, 1988. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-100373.
Повний текст джерелаSousa, Inês (Maria Inês Silva Sousa) 1972. "Integrated product design and life-cycle assessment." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/46141.
Повний текст джерелаKudrna, Jiri, and g. kudrna@unsw edu au. "Retirement Income Policy in Australia: Life-Cycle Analyses." University of Sydney, 2009. http://hdl.handle.net/2123/4119.
Повний текст джерелаRetirement income policy in Australia has undergone significant changes over the last two decades, including the introduction of the Superannuation Guarantee [SG] with mandatory contributions in 1992 and the 2007 superannuation changes with the benefit tax abolition. Numerical implications of adopted pension reforms and reform proposals such as further increases in the SG contribution rate, changes to superannuation taxation and to means-testing of the age pension have been examined mainly by micro-simulation models. These models, often criticized for their lack of theoretical content, provide an incomplete picture of pension policy effects because of no or limited behavioural responses to underlying policy changes. In this thesis, models based on the life-cycle theory of saving pioneered by Modigliani and Brumberg (1954) are applied to simulate behavioural, welfare and macroeconomics effects of proposed changes to Australia’s pension policy. In particular, this thesis develops the following computable models: a life-cycle, single household model, a partial equilibrium, household model and a general equilibrium model with overlapping generations [OLG]. The single household model describes lifetime behaviour of the utility-maximising single household with uncertain lifespan. The model features perfect capital markets, endogenous labour supply and retirement decisions, and it incorporates main aspects of Australia’s pension and income tax policy settings. The simulated policy changes are (i) increase in the SG contribution rate, (ii) superannuation tax changes and (iii) abolition of the age pension means test. The results indicate higher retirement consumption and welfare gains from all the analysed pension policy changes. Partial equilibrium and general equilibrium models introduced in this thesis are built on lifetime behaviour of the single household. Both models distinguish many generations of households by age and, therefore, are capable of studying behavioural and welfare effects of policy changes for different generations. The partial equilibrium model examines behaviour of the household sector in the environment of the fixed factor prices. It is shown, for instance, that welfare gains from the investigated pension policy changes are not uniformly distributed across generations. The general equilibrium OLG model extends the partial equilibrium analyses by incorporating production, government and foreign sectors in addition to household and pension sectors. The model is a small open economy version of Auerbach and Kotlikoff’s (1987) OLG model. The simulation results are significantly different from those in the partial equilibrium framework, driven mainly by the changes in aggregate labour supply. For instance, the higher SG rate policy increases aggregate assets and saving. However, the saving increases are exported abroad rather than invested in the domestic capital stock. Hence, the implications of this policy change for the capital stock and output are minimal. Younger cohorts and future born generations experience consumption and welfare gains but older cohorts are negatively affected by a higher consumption tax rate resulting from this hypothetical policy change.
Rodseth, Clare Josephine. "End-of-life in South African product life cycle assessment." Master's thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/29363.
Повний текст джерелаKalyan, Seshu Uma Sankar D. "Including life cycle considerations in computer aided design." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/16877.
Повний текст джерелаNy, Henrik. "Strategic Life-Cycle Modeling for Sustainable Product Development." Licentiate thesis, Karlskrona : Blekinge Institute of Technology, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-00352.
Повний текст джерелаBesbes, Khaoula. "Supply chain design with product life cycle considerations." Thesis, Artois, 2013. http://www.theses.fr/2013ARTO0209/document.
Повний текст джерелаOur research addresses the problem of designing a multi-level supply chain, while taking into consideration the product life cycle. By product life cycle, we mean the succession of the four marketing stages that a product goes through since its introduction to the market and until it will be removed from. All products have a life cycle which can be classified into four discrete stages: introduction, growth, maturity and decline.Depending on the product life cycle phases, and based on a thorough analysis of the different supply chain potential actors, this study aims to establish mathematical models to design an efficient supply chain network. Three main models have been developed in this thesis. The first proposed model aims to design a product-driven supply chain with a minimal total cost, taking into consideration the evaluation of the different potential actors effectiveness, according to several criteria (cost, quality, innovation, quality service, timely delivery, ...).A second model was developed to design of a sustainable supply chain network, taking into account the product life cycle. In this model, three different objectives at the time were considered, namely, an economic objective, an environmental objective and a social objective.In the two previous models, we have assumed that the product has a classical life cycle. However, in the reality this is not always the case. Indeed, some products have very atypical life cycles, whose curves are very different from the classical one. To tackle this problem, in the third part of this thesis, we propose a stochastic model to design a robust supply chain network, taking into account the different product life cycle scenarios
Chen-hong, Christina Yun-ju. "Cycle time modeling /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаYiu, W. Y. "Life cycle assessment in the construction industry." Click to view the E-thesis via HKUTO, 2001. http://sunzi.lib.hku.hk/hkuto/record/B42576039.
Повний текст джерелаLu, Di. "Environmental life cycle driven decision making in product design." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/34843.
Повний текст джерелаPriymenko, S. "The notion about energy product and its life cycle." Thesis, Видавництво СумДУ, 2012. http://essuir.sumdu.edu.ua/handle/123456789/26721.
Повний текст джерелаBrewer, Larry Arthur. "A life cycle cost based methodology for choosing among design alternatives." Thesis, This resource online, 1988. http://scholar.lib.vt.edu/theses/available/etd-04272010-020321/.
Повний текст джерелаJain, Nikhil Trishpal. "Supply chain management strategies for short life cycle products /." Digital version accessible at:, 1998. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаMARJOT, Cédric, and JOU-YEN (VERNA) LU. "Creative Process and Product Life Cycle of High-Tech Firms." Thesis, University of Kalmar, Baltic Business School, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hik:diva-351.
Повний текст джерелаGiven the context of globalization and growing competition, we assist at a reduction of the product life cycle and at a rapid diffusion of creations and innovations. To respond to the fast changing customers’ demand and to reinforce their market position, firms shall design an effective creative process offering superior customer value and insuring their future in the long term.
First of all, after an explanation of the differences between creativity and innovation, the creative process of high-tech firms in terms of actors involved, resources allocation, leadership and management of creative people will be depicted. Secondly, the creative destruction process and some of the inherent obstacles and risks of the creative process will be addressed. Thirdly, the concepts of Technology Life Cycle (TLC) and Product Life Cycle (PLC) will be developed.
Within this thesis, our ideas are presented and justified through three methodologies: Literature Review, case study and interview. We mainly used the cases of Hewlett-Packard (HP) and France Telecom Orange (FTO) to backup our argumentation.
We conceptualized the creative process and we highlighted the connections between the creative process and the Product Life Cycle. With the help of two other small cases study (Nintendo and Apple), we emphasized the downward trend of high-tech products’ lifecycle in the long run. Ultimately, four practical recommendations are given to leaders from high-tech industries and directions to deeper research this topic are advised.
Majety, Ramesh. "Procedural framework for product life cycle assessment using enterprise approach." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1996. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/MQ30916.pdf.
Повний текст джерелаNewcomb, Patrick James. "Implications of modularity on product design for the life cycle." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17593.
Повний текст джерелаOrtega, Roberto A. "Including life cycle performance considerations in a product development process." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/18175.
Повний текст джерелаMaksimovic, Maksim. "Lean knowledge life cycle framework to support lean product development." Thesis, Cranfield University, 2013. http://dspace.lib.cranfield.ac.uk/handle/1826/8263.
Повний текст джерелаNy, Henrik. "Strategic Life-Cycle Modeling and Simulation for Sustainable Product Innovation." Doctoral thesis, Karlskrona : Blekinge Institute of Technology, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-00441.
Повний текст джерелаChan, Wah-man, and 陳華民. "Application of life cycle analysis (LCA) to consumer product development." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31255140.
Повний текст джерелаSousa, Inês (Maria Inês Silva Sousa) 1972. "Approximate life-cycle assessment of product concepts using learning systems." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29917.
Повний текст джерелаIncludes bibliographical references (p. 143-150).
This thesis develops an approximate, analytically based environmental assessment method that provides fast evaluations of product concepts. Traditional life-cycle assessment (LCA) studies and their streamlined analytical versions are costly, time-consuming, and data intensive. Thus, they are not practical to apply during early concept design phases where little information is available and ideas change quickly. Alternatives currently used are mostly qualitative, ad-hoc approaches that often provide overly simplistic assessments difficult to trade-off with other design objectives. The Learning Surrogate LCA method is an alternative approach that uses simple, high-level, and accessible descriptive information about a product to provide approximate, yet useful, analytical LCA results during early concept design stages. The method relies on a general artificial neural network (ANN) trained on high-level product descriptors and environmental performance data from pre-existing detailed life-cycle assessment studies or related data. To quickly obtain an approximate environmental impact assessment for a product concept, the design team queries the trained artificial model with new set of descriptors, without requiring the development of a new model. The predicted environmental performance, along with other key performance measures, can be used in tradeoff analysis and concept selection. Foundations for the approach were established by investigating: (1) model inputs in the form of a compact, and meaningful set of product concept descriptors; (2) ability to gather data and appropriately train an ANN-based surrogate LCA model.
(cont.) Proof-of-concept tests on life-cycle energy consumption showed that ANN-based surrogate models were able to: (a) match detailed LCA results within the accuracy of typical LCA studies; (b) predict relative differences of distinct product concepts; (c) correctly predict and generalize trends associated with changes for a given product concept. A product classification system based upon concept descriptors was developed to improve performance. The method was then applied to a case study with a heavy truck manufacturing company. A demonstration example was used to illustrate application scenarios for tradeoff analysis within DOME (Distributed Object-based Modeling Environment). The study suggested that high-level, customizable simulation interfaces of learning surrogate LCA models are likely to have a significant practical impact in the early decision making process.
by Inês Sousa.
Ph.D.in Environmental Systems Design
Chan, Wah-man. "Application of life cycle analysis (LCA) to consumer product development /." Hong Kong : University of Hong Kong, 2002. http://sunzi.lib.hku.hk/hkuto/record.jsp?B2543889x.
Повний текст джерелаWu, You. "Enhancing product sustainability with Life Cycle Assessment and relevant technologies." Thesis, Nottingham Trent University, 2017. http://irep.ntu.ac.uk/id/eprint/33117/.
Повний текст джерелаRose, Elliot P. "Environmentally conscious design : an economic life cycle approach." Thesis, Cranfield University, 1997. http://dspace.lib.cranfield.ac.uk/handle/1826/3507.
Повний текст джерелаTsai, Weiyu. "Essays in new product introduction /." Thesis, Connect to this title online; UW restricted, 2003. http://hdl.handle.net/1773/8718.
Повний текст джерелаLau, Alfred Shuk Yin. "Analysis and improvement of the product life cycle in an electronic product manufacturing company." access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/dissert.pl?msc-meem-b21417581a.pdf.
Повний текст джерелаTitle from title screen (viewed on Oct. 5, 2006) "Submitted to Department of Manufacturing Engineering and Engineering Management in partial fulfillment of the requirements for the degree of Master of Science in enterprise technology and management." Includes bibliographical references.
Yiu, W. Y., and 姚泳儀. "Life cycle assessment in the construction industry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B42576039.
Повний текст джерелаEmblemsvåg, Jan. "Activity-based life-cycle assessments in design and management." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/32855.
Повний текст джерелаBailey, Fred Washington. "Models for differential age acceleration." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-12052009-020133/.
Повний текст джерелаThompson, David C. "Analysis of reliability estimations and spares protection levels on life cycle costs of the Marine Corps H-1 upgrades program." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Jun%5FThompson.pdf.
Повний текст джерелаGuidosh, Jacob A. "The use of life cycle assessment through an objective framework constructed by simulation /." Connect to resource online, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1252941644.
Повний текст джерелаAlly, Jamie. "Life cycle assessment and life cycle costing of hydrogen fuel cell, natural gas, and diesel bus transportation systems in Western Australia." Thesis, Ally, Jamie (2015) Life cycle assessment and life cycle costing of hydrogen fuel cell, natural gas, and diesel bus transportation systems in Western Australia. PhD thesis, Murdoch University, 2015. https://researchrepository.murdoch.edu.au/id/eprint/32053/.
Повний текст джерелаJung, Johannes [Verfasser]. "Comparative life cycle assessment of industrial multi-product processes / Johannes Jung." Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2014. http://d-nb.info/1059523116/34.
Повний текст джерелаMellet, Dieter. "Servicisation : extending the product life cycle of high technologically manufactured goods." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/895.
Повний текст джерелаENGLISH ABSTRACT: An investigation of the servicisation phenomenon and its influence on the product life cycle of high technologically manufactured goods. Rising demand for services and ongoing commoditisation of goods has forced businesses to purse alternatives to differentiate themselves in the market place. This has renewed interest to reposition the unit of exchange from a goods dominant to a service dominant perspective. Although applicability of the product life cycle as a marketing tool has often been questioned, it continues to form a fundamental building block of marketing theory. The purpose of this research report was to determine whether the servicisation phenomenon can be utilised as part of corporate strategy to extend the product life cycle of high technological goods. The primary objective was to gain new insight into the interesting and profitable combination of goods and services within the goods manufacturing industry. The main focus was to test whether a service dominant business model can extend the product life cycle. A case study of the product life cycle of the Apple iPod versus Creative’s digital media player value offerings was analysed. The main finding was that the iPod as opposed to Creative’s media player, did show signs of a longer product life cycle in the role of a service delivery vehicle. The service dominant business model has created many alternative revenue streams for Apple.
AFRIKAANSE OPSOMMING: 'n Ondersoek oor die dienste verskynsel en die invloed daarvan op die produkleefsiklus van hoë tegnologiese goedere. ‘n Toename in die aanvraag na dienste, en voortdurende omskepping van verbruikersartikels in kommoditeite, forseer besighede om na alternatiewe te soek om hulself in die markplek te differensieer. Daar is dus nuwe belang om die eenheid van handel te herdefinieer vanuit ‘n diens perspektief teenoor die tradisionele goedere een. Alhoewel die toepaslikheid van die produkleefsiklus, as ‘n instrument vir bemarkingsbesluitneming, talle keer bevraagteken is, bly dit ‘n hoeksteen van bemarkingsteorie. Die doel van hierdie navorsingsprojek was om te bepaal of die dienste verskynsel gebruik kan word in korporatiewe strategie om die produkleefsiklus te verleng. Die hoof doelwit was om nuwe insig te kry oor hoe ‘n produk en dienste gekombineer kan word om winste van vervaardigers te verbeter. Die hoof fokus was om te toets of ‘n diensgesentreerde besigheidsmodel die produkleefsiklus kan verleng. ‘n Studie van die produkleefsiklus van Apple se iPod is gedoen teenoor dié van Creative se digitale mediaspeler. Daar is bepaal dat die iPod, teenoor Creative se mediaspeler, wel tekens van ‘n langer produkleefsiklus toon, in die rol van ‘n diensleweringsinstrument. Dié diens gesentreerde besigheidsmodel voorsien Apple van vele alternatiewe bronne van inkomste.
Lindkvist, Louise. "Exploring Product Life-Cycle Information Flows with a Focus on Remanufacturing." Licentiate thesis, Linköpings universitet, Industriell Produktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-107496.
Повний текст джерелаEk, Lina, and Sanna Ström. "Evaluating the Environmental Impact of a Product : Partial Life Cycle Assessment." Thesis, Tekniska Högskolan, Jönköping University, JTH, Logistik och verksamhetsledning, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-49821.
Повний текст джерелаAhmed, Shadman. "Phase-Out Demand Forecasting : Predictive modeling on forecasting product life cycle." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-287446.
Повний текст джерелаUtfasningen i en produktlivscykel kan kännetecknas vara oförutsägbart. En noggrann prognos av stadiet kan ge värdefull insikt såsom att begränsa antalet utgångna inventeringar och om produktens efterfrågan. Detta kan ge positiv ekonomisk effekt samt spara resurser. I denna studie jämförde vi med domän experter om data drivna prognosmodeller kunde förbättra estimeringen av efterfrågan inom utfasningen i en produktlivscykel. På grund av att tillgängligheten av prognosmodeller är omfattande, ett antal modeller studerades som visat bäst resultat i olika studier. Efter en nogrann urval av 11 olika modeller som visade bäst prestanda, användes följande 3 modeller för den senare delen av studien: Autoregressiv Integrerad Glidande Medelvärde (ARIMA), Stödvektor Regression (SVR) och Gaussisk Process Regression (GPR). Resultat visade att ingen av modellerna kunde generellt förbättra prognoserna, dock visade SVR signifikant liknande prognosfel som planestimeringarna från domän experter för 14 unika produkter. Dessutom visades sig att en minskning av data förbättrade prestandan hos modellerna. Där endast 60% av träningsdatat tycktes vara optimalt för ARIMA och GPR medan SVR med 80%. Vi presenterar resultaten ihop med ytterligare frågor som undersöktes inom detta område.
Naneva, Natasa. "Marketing Strategies During the Product Life Cycle in the Pharmaceutical Industry." ScholarWorks, 2018. https://scholarworks.waldenu.edu/dissertations/6073.
Повний текст джерелаThe, Jaya Suteja. "Time-driven life cycle cost estimation system for product family design." Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/94101/1/Jaya%2520Suteja_The_Thesis.pdf.
Повний текст джерелаTudor, Kerry. "Life cycle assessment of materials and automotive structures." Thesis, Swansea University, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.587511.
Повний текст джерелаYu, Chuan, and 余川. "Life cycle analysis of different feedstocks of biodiesel production." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B49618027.
Повний текст джерелаpublished_or_final_version
Mechanical Engineering
Master
Master of Philosophy
Sowder, James Loyd. "Assessing the effect of design for producibility on repairable product life-cycle cost." Thesis, Virginia Tech, 1988. http://hdl.handle.net/10919/45192.
Повний текст джерелаMaster of Science
Palomeque, Alberto. "Impact of Embedded Software Design Decisions on the Product Life Cycle Process." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10018.
Повний текст джерелаSoftware design decisions were considered in this study, as the possibly principal factor for unplanned adjustments related to the embedded software handling, at production- and service processes. The study reveals an increase of requirement changes during the last phases in then software development projects execution, which forces late design decisions in order to fulfil the changed requirements. Consequently, the likelihood of risks for unexpected impacts on the subsequent processes will increase.
A research approach based on interviews and data from previous projects at Volvo CE was performed. The process methodology used at Volvo CE for software development was investigated from the project planning and control view and the project team member’s perspective.
A high amount of software-design decisions were encountered at the end of the software development process at Volvo CE, as a result of numerous requirement changes at the final phases of the projects execution. A gap was identified between how the process methodology specified the progression of activities for software development and the actual progression of the project activities in Volvo CE.
This study discusses problem areas in the software development process at Volvo CE from an embedded design decisions perspective. As future work, the study recommends three steps to find improvements to the process methodology: 1) Update the process based on standardized procedures for management of requirements changes, risk handling, and communication. 2) Further analysis and possible adaptations of the process model 3) Develop methods and/or tools for process quality assurance.
The management of the embedded software decisions appears to be a very complicated area, the conventional statements on the importance of the decisions in the earlier phases, at least, should be further discussed and investigated.
PREPARE
Shahmarichatghieh, M. (Marzieh). "Product development sourcing strategies over technology life cycle in high-tech industry." Doctoral thesis, Oulun yliopisto, 2017. http://urn.fi/urn:isbn:9789526215273.
Повний текст джерелаTiivistelmä Tämä tutkimus tarkastelee tuotekehityksen hankintastrategioita teknologioiden, tuotteiden ja markkinasegmenttien eri elinkaarivaiheissa. Väitöskirja lähestyy tuotekehityksen hankintaa seuraavista näkökulmista: 1) tuotekehityksen ja teknologioiden elinkaarien pääkonseptit, 2) tuotekehitystoiminnat teknologianelinkaarien vaiheissa, 3) tuotekehityksen hankinnat teknologianelinkaaren vaiheissa, ja 4) päätöksenteon vuokaavio. Yksittäiset löydökset on edelleen syntetisoitu ja kolmiulotteinen näkemys teknologioiden, tuotteiden ja markkinoiden kehittymiseen on esitetty keskeisenä kontekstina organisaatioille. Väitöstutkimus esittää että tuotekehityksen hankintastrategiat pitäisi analysoida ja päättää perustuen teknologioiden, tuotteiden ja markkinoiden strategiseen positioon elinkaarivaiheissa. Erilaiset tuotekehityksen hankintastrategiat voivat parantaa yritysten kilpailukykyä teknologioihin ja tuotekehitysresursseihin liittyvän kriittisen tiedon tehokkaan johtamisen ansiosta. Väitöskirja on luonteeltaan laadullista tutkimusta hyödyntäen induktiivista päättelylogiikkaa perustuen sekä aiemman kirjallisuuden tarkasteluun, että empiirisesti puolistrukturoituihin haastatteluihin kokeneiden tuotekehityspäälliköiden ja -johtajien kanssa. Tutkimus toteutettiin tarkastelemalla neljään eri teknologiasukupolveen liittyviä tuotekehityksen ja hankintastrategioiden historiatietoa ja aineistoa yhdessä johtavassa korkeanteknologian yrityksessä. Tarkasteltujen teknologiasukupolvien teknologiaevoluutiota on pohdittu ja kerättyä dataa on analysoitu mahdollisten merkittävien yhteyksien tunnistamiseksi ja ymmärtämiseksi suhteessa aikaisempiin tutkimuksiin ja kirjallisuuteen. Suoritettu analyysi sisältää viisi erillistä osajulkaisua ja tässä kokoomaosassa esitetyn synteesin. Tämän tutkimuksen keskeinen tulos on kehitetty tuotekehityksen hankintaviitekehys (PDSF) joka esittää tuotekehityksen hankintastrategioiden muodostamisen ja valitsemisen perustuen teknologioiden, tuotteiden ja markkinoiden kypsyysasteisiin, elinkaarivaiheisiin. Tämä edellyttää eri teknologiaelinkaarivaiheiden erityispiirteiden ymmärtämistä ja tuotekehitysaktiviteettien strategista arviointia. Tutkittuja strategisia tekijöitä voidaan hyödyntää tukemaan tuotekehityksen hankintamallin valitsemista ja päätöksiä. Tutkimuksen keskeiset implikaatiot sisältävät struktuurin luomisen, tuotekehityksen hankintaviitekehyksen (PDSF) muodossa tukemaan tuotekehitysjohtajia heidän päätöksenteossaan liittyen tuotekehityksen hankintastrategioihin. Luotu tuotekehityksen hankintaviitekehys mahdollistaa poikkiorganisaatiollisen tarkastelun tuotekehityksen strategisista hallintamalleista huomioiden teknologioiden, tuotteiden ja markkinasegmenttien elinkaaret ja niiden vaikutukset strategiseen päätöksen tekoon. Lisäksi, tämä tutkimus voi myös osaltaan helpottaa tuottamattomien tuotteiden ja tuotelinjojen lakkauttamiseen liittyvää analyysia ja päätöksentekoa
Ungureanu, Constantin Adrian. "DESIGN FOR SUSTAINABILITY: PRODUCT LIFE-CYCLE ANALYSIS IN ALUMINUM AUTO BODY APPLICATIONS." Lexington, Ky. : [University of Kentucky Libraries], 2007. http://lib.uky.edu/ETD/ukymseg2007t00556/Thesis.pdf.
Повний текст джерелаTitle from document title page (viewed on April 25, 2007). Document formatted into pages; contains: viii, 88 p. : ill. (some col.). Includes abstract and vita. Includes bibliographical references (p. 83-87).
Dalhammar, Carl. "An emerging product approach in environmental law : incorporating the life cycle perspective /." Lund : International Institute for Industrial Environmental Economics, 2007. http://www.gbv.de/dms/zbw/561382867.pdf.
Повний текст джерелаSödergren, Jacob. "The Impact of a Teracom Group Product From a Life Cycle Perspective." Thesis, KTH, Industriell ekologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-118479.
Повний текст джерелаLan, Tian. "MATHEMATICAL MODELING FOR PLATFORM-BASED PRODUCT CONFIGURATION CONSIDERING TOTAL LIFE-CYCLE SUSTAINABILITY." UKnowledge, 2015. http://uknowledge.uky.edu/me_etds/56.
Повний текст джерела