Дисертації з теми "Product engineering design"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Product engineering design".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Schütte, Simon. "Engineering emotional values in product design : Kansei engineering in development /." Linköping : Dept. of Mechanical Engineering, Univ, 2005. http://www.ikp.liu.se/kansei.
Повний текст джерелаHansen, Martin. "A Friendly Product : A Kansei engineering study." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Industridesign, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-46316.
Повний текст джерелаSchütte, Simon. "Engineering Emotional Values in Product Design : Kansei Engineering in Development." Doctoral thesis, Linköpings universitet, Maskinkonstruktion, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-497.
Повний текст джерелаBradley, Hugh D. "Aggregate process planning and manufacturing assessment for concurrent engineering." Thesis, Durham University, 1997. http://etheses.dur.ac.uk/4719/.
Повний текст джерелаBeckert, Michelle T. 1969. "Organizational characteristics for successful product line engineering." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/82681.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Includes bibliographical references (p. 116).
by Michelle T. Beckert.
S.M.
Morrise, Jacob S. "Collaborative Products: A Design Methodology with Application to Engineering-Based Poverty Alleviation." BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/2831.
Повний текст джерелаRiedel, Johann Christian Karl Henry. "Design-production interface in the UK mechanical engineering industry." Thesis, University of Wolverhampton, 1994. http://hdl.handle.net/2436/90562.
Повний текст джерелаPage, Matthew E. (Matthew Edwin) 1975. "Blending engineering modeling, industrial design, and physical prototyping in product design." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/28225.
Повний текст джерелаIncludes bibliographical references (leaves 63-64).
Engineering simulation models, industrial design form models, and physical experimentation through prototypes are critical elements of successful product design. However, the three disciplines are disconnected and the direction of simulations, form models, and physical prototypes often diverge increasingly as product detail is developed. This divergence often results in an expensive and time consuming design cycle and inferior product quality. The first 10% of the cycle is taken up largely by conceptual design, an iterative stage that requires close interaction between industrial designers, modelers and engineers. In the current state of the art, information is often lost when models are approximately reconstructed from physical prototypes, CAD or surface models. A new approach to the conceptual design cycle is developed and applications for the design of consumer products are discussed. The tools that make up the cycle work together to create a flexible, iterative design environment. Industrial designers, engineers, and modelers generate and exchange form concepts, alternating between physical and digital representations of product geometry. Rapid alternation between the physical and digital domain is enabled and information flow between iterations is improved.
by Matthew E. Page.
S.M.
Atherton, Mark Anthony. "Effective product design enhancing robust engineering design and quality function deployment." Thesis, City University London, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389704.
Повний текст джерелаSu, Benjamin W. "Weelchair exercise roller product design." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/32959.
Повний текст джерелаIncludes bibliographical references (leaf 35).
Inspired by bicycle training rollers, a wheelchair exercise roller (an exercise machine for the application of wheelchair users) was designed from conception of idea to alpha prototype. Background and market data was gathered through research with disabled people, members of disability and rehabilitation centers, and by examining other existing related products. Initial designs were created, and using these designs, functional requirements were set. These functional requirements were used to determine the main product modules (rollers, frame, and ramp) and desired features (simulated natural inertia/forces, varying resistance, tilt feature, etc.) Keeping these in consideration, initial calculations and hands-on research were performed in particular to determine the effect of radial load and RPMs on the bearings. Then, by using test modules built with inline skate bearings, aluminum tube, and wood 2"x 4"s, the initial calculations and research were tested. The results of these tests helped to determine the eventual final design. Solid modeling software (Solidworks 2005) was then used to create various design iterations and make changes as needed.
(cont.) Finally, using the final solid model, a functional prototype was built using 2"x 2" aluminum angle, conveyor belt rollers, and plywood. This prototype was then tested under the conditions the product was originally intended to function under. The result of these tests showed that in the current state, the prototype was not at a level ready to be marketed. The rollers in their current state did not fully simulate the natural inertia and forces felt when rolling on real ground. Also, several desired features had not yet been implemented. However, the prototype did succeed in ultimately showing potential functionality and feasibility of the product.
by Benjamin W. Su.
S.B.
Ejder, Marcus, and Walles Hans König. "Basic Engineering Time : Assembly Time Driven by Product Design." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-128173.
Повний текст джерелаKönig, Walles Hans, and Marcus Ejder. "Basic Engineering Time : Assembly Time Driven by Product Design." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133304.
Повний текст джерелаMaffin, David James Bentley. "Engineering design and product development in a company context." Thesis, University of Newcastle Upon Tyne, 1996. http://hdl.handle.net/10443/311.
Повний текст джерелаMusgrave, Kenneth C. "A multi-disciplinary, concurrent engineering, product development model for industrial design." Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/22380.
Повний текст джерелаDiBacco, John 1976. "Laser cutting applications in product design." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9571.
Повний текст джерелаGraham, Marc Miller. "Teaching product development by deterministic design." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/36194.
Повний текст джерелаIncludes bibliographical references (p. 179-180).
The objective of this work was to develop a deterministic design and teaching process for the creation of new products ranging from books, to music, to consumer products. The foundation of the process is the Peer-Review Evaluation Process (PREP). The process is especially useful for diverse teams of designers with members from various cultures, races, genders and personalities. It is especially useful for helping team members who are not comfortable with verbal group brainstorming or one-on-one type interactions to contribute to the development of designs. Projects were completed by teams largely comprised of underrepresented minority and female students using Deterministic Design with PREP. Design teams were monitored and students from six consecutive years of a design course were given questionnaires to determine the level of collaboration and designer satisfaction throughout the development process. Questionnaire responses indicate increasing levels of collaboration throughout development and above average satisfaction with the process. Students indicated that since learning the process, over 45% use PREP 75% of the time and over 75% use PREP at least 50% of the time when working with others.
(cont.) Three patents have been issued from products developed using this process, and one is pending. The process has been introduced to universities in South America and Europe and a teaching manual is being published. Two goals are to continue to introduce Deterministic Design with PREP to other schools, organizations, and disciplines, and to start an Urban Design Corps.
by Marc M. Graham.
Ph.D.
Cohen, Tal. "A data approach to tracking and evaluating engineering changes." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17971.
Повний текст джерелаPedersen, Kjartan. "Designing platform families : an evolutionary approach to developing engineering systems." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18189.
Повний текст джерелаBocanegra, César 1972. "Design and implementation of the Product Development Design Decomposition (PD³)." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/88880.
Повний текст джерелаEngelhardt, Fredrik. "Robust product development by combining engineering design and designed experiments." Doctoral thesis, Stockholm, 2001. http://www.lib.kth.se/Sammanfattningar/engelhardt010601.pdf.
Повний текст джерелаLevitt, Benjamin (Benjamin P. ). "Product service transformation in product-centric firms." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/90716.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 95-97).
In slow or no-growth economies, firms cannot rely solely on recurring business from large, core customers who often delay or cancel capital investments in belt-tightening times. To achieve growth, firms must lever domain knowledge to expand business markets to find new customers. A core method to accomplish this expansion is through service models that can provide recurring revenues without as much up-front investment for customers. However, in a product-centric firm, the process of transforming a product into a service can be complex, and is the motivation for this research. No other complete explanation of this process has been published to date. The goal of researching this process is to give direction to managers who are considering transforming a product into service. The research led to building a service model using the Collaborative Adaptive Sensing of the Atmosphere (CASA) Radar System as its subject. The CASA Radar System is an X-Band Phased-Array Radar used for weather forecasting and environmental warning, led by University of Massachusetts with the assistance from several universities and industry partners. The radar system provides capabilities that did not exist previously in larger and less price effective systems, but was only available to be acquired directly, for upwards of $600 million. The CASA model sought to show how transforming the radar system from a product to a service could create value for the UMASS led team by selling more systems in a new service model to new customers, including weather-sensing firms and non-profits that want access to the CASA Radar System and would even pay for it, but were unable to support its standard capital costs.
by Benjamin Levitt.
S.M. in Engineering and Management
Clausson, Leif. "Business Innovation by utilizing Engineering Design Theory and Methodology." Doctoral thesis, KTH, Skolan för industriell teknik och management (ITM), 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3857.
Повний текст джерелаQC 20100920
Tatangsurja, Hendra. "Digital filter design using stored product ROMs." Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5332.
Повний текст джерелаDeniz, Juan C. (Deniz Carlos) 1976. "Learning theory applications to product design modeling." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/89269.
Повний текст джерелаPore, Mridula. "Pharmaceutical tablet compaction : product and process design." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/51623.
Повний текст джерелаIncludes bibliographical references.
This thesis explores how tablet performance is affected by microstructure, and how microstructure can be controlled by selection of excipients and compaction parameters. A systematic strategy for formulation and process design of pharmaceutical tablets is proposed. A modified nanoindenter method was used to test the mechanical behavior of diametrally compressed excipient granules. X ray micro computed tomography and Terahertz pulsed spectroscopy (TPS) and imaging (TPI) were used to analyze the microstructure of the tablet core and detect internal defects. Granule failure mechanisms are found to be consistent with tablet microstructure. MCC granules deform plastically when tested and X ray images show individual granules undergoing increasing deformation in tablets as higher compaction forces are used. A highly interconnected pore-structure limited tablet hardness and led to bursting behavior during dissolution. No effect of compaction force or speed was observed in dissolution profiles. Lactose granules fracture at strains less than 5%, forming monolithic structures with no evidence of initial granule shape or size. Pore size decreases as compaction force is increased for DCL 11 tablets. A decreasing pore size corresponds to increasing THz refractive index, tablet hardness and dissolution time. DCL 11 and DCL 14 tablets compacted under the same conditions have the same pore size distributions and hardness, although DCL 14 granules are weaker than DCL 11, and DCL 14 tablets dissolve up to four times slower than DCL 11 tablets. No difference was observed between the THz spectra of tablets made from the two grades of lactose.
(cont.) Further work is needed to understand the physical significance of the THz measurements. TPI can detect laminated tablets and is faster than X ray micro CT. In order to develop a rational design methodology, two key areas for future research are building a process model for compaction and developing quality testing methods that can be analyzed mechanistically. The capstone project explores strategic decision making for innovator firms and generic drug manufacturers in the period surrounding patent expiry. Statin products were used as an illustrative case of a pharmaceutical technology experiencing commoditization. A system dynamics model was used to simulate historic results and explore options for products still under patent protection. Current models of technology market dynamics apply to statins, but regulation and legislation play a large role in controlling market entry, leading to strong sequencing effects.
by Mridula Pore.
Ph.D.
Gonzalez-Zugasti, Javier P. (Javier Patricio) 1965. "Models for platform-based product family design." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/9300.
Повний текст джерелаIncludes bibliographical references (p. 95-97).
Platform-based product families have been an effective way for companies to offer increased variety into markets, while containing the resulting complexity of developing large numbers of products. A product platform is the set of resources - components, processes, technologies, and knowledge - that are shared across multiple products offered by a firm. The products derived from that common platform are called the variants, and the set of variants forms a product family. This thesis presents a theoretical basis for modeling the design of platform-based product families, as well as practical implementations based on those models. The problem is formulated as an optimization, where the requirements of the desired variants must be balanced against family objectives, such as maximizing the value of developing the family. A general case is formulated that covers the effects of using a platform-based design on the benefits and investments required to produce the desired family. The problem is then simplified into a two-step optimization approach to apply it to actual design situations for complex products. The first stage considers the technical details of creating feasible product families that satisfy the variants' requirements while optimizing the expected value to the firm. The second stage evaluates the design alternatives generated by the first step, considering the effects of uncertainty during the actual development of the family on its value to the firm. This evaluation is then used to select the most appropriate choice of family design. A case study of the design of multiple NASA exploratory space missions based on alternative telecommunications technology platforms is shown. Applying the approach resulted in several alternative family designs, some of which had not been previously considered viable. The resulting candidate designs were evaluated through the use of decision analysis models developed in this thesis, which calculate the value to the firm of each design. Simulation was then used to evaluate the value of each alternative and its flexibility to changes in uncertain factors during the development process. As a reference, a Pugh-type selection method (a qualitative, multi-criteria approach) was also explored and applied to the example of platform-based spacecraft design.
by Javier P. Gonzalez-Zugasti.
Ph.D.
Borland, Nicholas (Nicholas Paul) 1971. "Integrating environmental impact assessment into product design." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/46239.
Повний текст джерелаHounsell, Marcelo da Silva. "Feature-based validation reasoning for intent-driven engineering design." Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/33152.
Повний текст джерелаScudieri, Paul Anthony. "Information in Complex Product Systems." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1236698805.
Повний текст джерелаMowrey, Corinne H. "Retail Facility Design Considering Product Exposure." Wright State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=wright1472487958.
Повний текст джерелаXin, Chen Hilario Lorenzo. "Modelling resources in simulation engineering design processes." Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/269709.
Повний текст джерелаDaley, John. "Autonomic product development process automation /." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1958.pdf.
Повний текст джерелаSmith, Alfred, and Jari Oikarinen. "Design study of a new product." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-40877.
Повний текст джерелаDetta examensarbete inom produktutveckling och design, genomförd på Jönköping University i samarbete med Husqvarna AB, presenterar en designstudie för en ny produkt. Designstudien är utförd av Jari Oikarinen och Alfred Smith. Inledningsvis strukturerades arbetet av en projektplan och en pilotstudie. Genomförandet innehåller en fallstudie, konceptstudie och ett experiment på produkten. Flertal koncept blev utvärderade tills en var kvar. Designstudien avslutar med resultaten, att vissa interna komponenter behöver bytas eller förändras för att kunna använda produkten, presentation av det slutliga konceptet och prövning för produkten. Slutligen rekommenderas ytterligare arbete utifrån denna rapport
Messer, Matthias. "A systematic approach for integrated product, materials, and design-process design." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22608.
Повний текст джерелаCommittee Chair: Allen, Janet K.; Committee Member: Aidun, Cyrus K.; Committee Member: Klein, Benjamin; Committee Member: McDowell, David L.; Committee Member: Mistree, Farrokh; Committee Member: Yoder, Douglas P.
Mortenson, Schiveley Sara Beth 1975. "Ergonomic product and process design." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/34758.
Повний текст джерелаIncludes bibliographical references (p. 66).
Ergonomic injuries are not the result of acute events. An ergonomic injury develops gradually from continued actions combining force, motion repetition, posture, and duration. Because these injuries accrue over time, it is often difficult to determine their causes. Lacking a clear causal link, it is difficult to justify investments that are intended to prevent ergonomic injuries. A large computer manufacturer, Dell Inc, is targeting significant reductions in their factory injury rates. This thesis describes the evaluation of two desktop computer manufacturing facilities. As part of this work, OSHA logs from 2002 were analyzed, injury costs were collected, factory workers were surveyed, and biomaterials associated with ergonomic injuries were studied. The analysis of the OSHA logs determined that 70% of factory injuries were ergonomic in nature and that a majority of the ergonomic injuries occurred as a result of work in the computer assembly (build) area. The costs associated with ergonomic injuries were computed on a cost per box (CPB) basis, a common metric used throughout Dell factories to determine financial impact. In order to evaluate, improve, and monitor the ergonomic factors on the factory floor, an evaluation tool for product and process design was developed. This tool incorporates risk factors of force, motion repetition, and posture while determining ergonomic scores for products and process steps. Tool validation was achieved by comparing ergonomic scores with worker product preferences, as revealed by an employee survey. Currently, the ergonomic evaluation tool is being used by the Environmental, Health, and Safety (EHS) Department at Dell. A greater understanding of the causes behind ergonomic injuries, combined
(cont.) with use of the evaluation tool, is contributing to Dell's efforts to continuously reduce the occurrence of ergonomic injuries and associated costs.
by Sara Beth Mortenson Schiveley.
S.M.
M.B.A.
Sousa, Inês (Maria Inês Silva Sousa) 1972. "Integrated product design and life-cycle assessment." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/46141.
Повний текст джерелаAyas, Ebru. "Engineering Quality Feelings : Applications in products, service environments and work systems." Doctoral thesis, KTH, Ergonomi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-43388.
Повний текст джерелаQC 20111017
Ahmed, Uday, and Priscilla Ayo. "Developing Common Questions about Integrated Product Service Engineering (IPSE), Ecodesign and Engineering Education." Thesis, Linköpings universitet, Industriell Produktion, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-118760.
Повний текст джерелаMarshall, Russell. "Design modularisation : a systems engineering based methodology for enhanced product realisation." Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/2176.
Повний текст джерелаNordlöf, Ida. "Kansei Engineering for small business : Shedding new light on product design." Thesis, KTH, Maskinkonstruktion (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168721.
Повний текст джерелаMålet för detta arbete var att tillämpa Kansei Engineering på ett litet företag och att formge en skrivbordslampa för kontorsmiljö. Kansei Engineering är en metod som utvecklats för att omvandla användarens känslor och upplevelser till konkreta produktparametrar. En metod som kallas Kansei Engineering Typ I applicerades på skrivbordslampan. Målet med metoden var att undersöka vilka formparametrar som kommer att ge användarna det mest positiva intrycket .Proceduren var att ta fram Kansei ord ( adjektiv , substantiv , verb och meningar som beskriver vad användaren ska uppleva av produkten ), ett urval av produkter och utforma en enkät med en SD-skala. Ett urval av potentiella användare från olika företag besvarade enkäten. Resultaten från undersökningen analyserades och tolkas. I slutändan kunde Kansei orden kopplas till olika produktparametrar samt formparametrarna för det mest positiva intrycket kunde konkluderas. Denna metod kompletterades med kreativa metoder som involverade en enkät och workshop med potentiella användare och en session brainwriting med företaget som författaren av detta arbete har samarbetat med .Några koncept togs fram och en valdes . Konceptet utvecklades ytterligare med hjälp av prototyper. Till slut togs en modell fram i CAD och ritningar levererades till företaget.
Yang, Hong Mo. "An approach to product design using a product performance versus cost model." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/13418.
Повний текст джерелаIncludes bibliographical references (leaf 73).
by Hong Mo Yang.
M.S.
Simpson, Timothy W. "A concept exploration method for product family design." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/17508.
Повний текст джерелаAyubi, Harry H. "Advanced skills required for engineering leaders in global product development." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/70795.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 85-88).
Observations from first hand experience on the Boeing 787 Program during development of perhaps the most important and exciting new commercial airplane in recent history has identified opportunities to enhance the global product development skills of key engineering leaders. Extreme challenges related to typical factors (e.g., cost, schedule, quality) are coupled with a radically different business model - one shaped by a product development strategy that relies heavily on globally dispersed risk-sharing partners. In addition, the 787 would use dramatically new carbon composite materials and manufacturing methods for the airplane structure, as well as advanced technologies for the airplane systems and propulsion. This was further complicated by the parallel development of new design software intended for use in creating, sharing, and managing all 787 product definition data. The lead design engineer - among the most critical resource on the product development team - must engage on all fronts. Given the complexities of this endeavor, advanced skills are necessary for engineering leaders to succeed, and Boeing must ensure they have these skills. This research was intended to specify some of these advanced skills, identify deficiencies in the current workforce, and suggest ways in which industry and academia might team together to address such deficiencies.
by Harry H. Ayubi.
S.M.in Engineering and Management
Hernandez-Mena, Lucas. "National product design competition for high school students." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/54533.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 26).
Sir Ken Robinson said, "We don't grow into creativity, we grow out of it or rather we're educated out of it."' Throughout my education I have found this statement to be true especially in it's relation to high school education in America. This lack of creativity-based education is the inspiration for this thesis work. As a high school student I was able to participate in a few robotics competitions, such as FIRST Robotics Competition, that enabled me to begin thinking creatively about problems. These competitions were focused on allowing students to gain engineering experience and inspiring them to pursue a degree in a science or technology field. However, the competitions tended to primarily attract students who are already interested in these fields. This thesis will propose and provide motivation for an Internet-centric, national product design competition for high school students that will teach and inspire the use of creativity for a wide range of students that have interests in many different fields. This document begins with highlighting and outlining the main competitions, programs, and classes that have been drawn on for the creation of this competition. Then, the main motivation and goals of the competition are outlined. Lastly the structure of the competition and the online community is described. The competition proposed in this thesis is perhaps a utopian ideal structure that requires further development and consideration before it can be implemented in the high school setting. Some future development includes surveying high school teachers on the practicality of such a competition in relation to their personal experiences with the interest level and capabilities of high school students.
(cont.) Also a large a part of the future work would include the development and testing of the online community as a portal for high school students to learn and share about product design. Lastly, future work will involve an intensive analysis of the financial requirements incorporated with the implementation of a competition of this nature.
by Lucas Hernandez-Mena.
S.B.
Winther, Garrett L. (Garrett Lee). "Case study in rapid product design and development." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68538.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 66).
This thesis explores a new strategy in developing products quickly, cheaply and efficiently, with the hopes to redefine the paradigms behind the product design process. This was carried out through the development of the product "flatRat", a commemorative MIT novelty ring. With this product, we explored different prototyping techniques, manufacturing processes, and business strategies with the hope to optimize the process for others to carry out similar projects. This thesis summarizes a selection of work from the development of flatRat from concept generation to final product sales. The ultimate goal of this project was to bring a product to life with limited resources. From the project's beginning in June, 2009 to its capstone in February, 2011, flatRat was designed and developed fully into a marketable product followed by an initial manufacturing run of 500 units. These were sold to MIT's Class of 2013 Ring Committee and given away to attendants of the "Ring Premiere" Ceremony on February 11, 2011. This product is currently being developed further to be sold at the MIT Museum and Campus Bookstore. The process developed around this product is currently being implemented at Olin College of Engineering under Dr. Lawrence Neeley.
by Garrett L. Winther.
S.B.
Frey, Daniel D. (Daniel David). "Using product tolerances to drive manufacturing system design." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/10446.
Повний текст джерелаCividanes, Alberto J. (Alberto José) 1978. "Optimal scheduling of design reviews in product development." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/89347.
Повний текст джерелаPeak, Russell Speights. "Product model-based analytical models (PBAMs) : a new representation of engineering analysis models." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/18379.
Повний текст джерелаAndersson, Moa. "Product development and design of industrial sensors." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Produktutveckling - Industridesign, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-36113.
Повний текст джерелаIoT-teknologi, Internet of Things, är en snabbt växande marknad, det innebär att mer och mer produkter, kläder, även människor förses med sensorer som i sin tur kan förstå omgivningen och kommunicera, detta för att skapa ett smartare samhälle. För att företag ska kunna vidhålla positionen på marknaden är det viktigt att hela tiden erbjuda produkter med bättre komponenter och mindre till storleken. För skapa en starkare position, företaget borde erbjuda revolutionerande produkter med unika egenskaper. Det är en av de här idéerna som har undersökts i det här examensarbetet. Arbetet har skett under ett samarbete med företaget CombiQ, belägen i Jönköping. Produkten som skulle tas fram var en industriell sensor, som skulle använda sig av IIoT-teknologin, Industrial Internet of Things, som företaget utvecklar. Tidpunkten när det här arbete utfördes, CombiQ hade inga egna produkter men all teknologi som sitter i sensorerna. För att ta fram en industriell sensor för CombiQ behövde inte bara möjligheterna att tillverka en produkt utefter funktionerna undersökas. Varumärket behövde även analyseras för att utveckla en produkt som uttrycker företaget och dess varumärke på rätt sätt. Genom att tillämpa metoder och verktyg från både produktutvecklingsprocesser och designprocesser, kunde ett koncept tas fram som uppfyllde de uppställda kraven och funktionerna. Den huvudsakliga funktionen i sensorn var att produkten skulle bestå av moduler och på det viset kunna justeras utefter vad kunden behöver. Vidare, under projektet har även CombiQ som varumärke undersökts och riktlinjer för designen har tagits fram som reflekterar företaget och dess varumärke. Design riktlinjerna kan användas för att ta fram ytterligare produkter med samma maner, vilket har visats i detta arbete genom att ta fram designkoncept på ytterligare produkter som räknas till samma produktfamilj som sensorn med moduler.
Bryant, Scott T. "User centred engineering in automotive design: A shift from technology-driven product development." Thesis, Queensland University of Technology, 2015. https://eprints.qut.edu.au/84793/1/Scott_Bryant_Thesis.pdf.
Повний текст джерела