Дисертації з теми "Product design approaches"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Product design approaches".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Börjesson, Fredrik. "Approaches to Modularity in Product Architecture." Licentiate thesis, KTH, Maskinelement, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-96491.
Повний текст джерелаQC 20120605
Adler, Niclas. "Managing complex product development : three approaches." Doctoral thesis, Handelshögskolan i Stockholm, Programmet Människa och Organisation (PMO), 1999. http://urn.kb.se/resolve?urn=urn:nbn:se:hhs:diva-13.
Повний текст джерелаDiss. Stockholm : Handelshögskolan, 1999
Marie-Rose, Aymerick. "IN-BETWEEN: PRODUCT DEVELOPMENT STUDY THROUGH INDUSTRIAL AND EXPERIMENTAL APPROACHES." Thesis, Jönköping University, JTH, Industridesign, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-54775.
Повний текст джерелаExperimentell design är en praxis som fungerar på gränsen mellan hantverk, konst och teknik. I samarbete med studio breadeEscalope (Wien, Österrike) pendlar detta projekt mellan forskning och produktion för att studera sambandet mellan industriell och experimentell strategi för design. Hittills initierad från en impuls eller ett problem som kräver lösning, föreslår åtgärden att designa en produkt eller en tjänst för att uppfylla behoven. Inom industriell design följer den kreativa processen kontextuellt förankrade steg för att rama in, definiera, utveckla och leverera. För ett pragmatiskt svar är leveransen centrerad kring användaren och dess behov, vilket ofta leder till en ogenomskinlig färdig produkt. Hemmets grund, klädhänget valdes för att stödja denna studie som en konkret produktbas för trend- och konsumentbeteendeanalys. Från delat prydnads- och funktionellt föremål placerat i ingången till hus är klädhänget tidigare "hatstand", idag ett obemärkt inhemskt föremål. Slutprodukten tillverkades för hand med återvunnen och rå komponent, vilket gav insyn i produktionsprocessen och använt material. Att stapla upp rockar på det producerade racket skapar ett privat utrymme för användaren att sitta i och ifrågasätter förhållandet mellan användare och produkt (ägande, förtroende, värde). Baserat på arkitektoniska koncept och designteori syftar produkten till att överbrygga kreativa och tekniska discipliner för att föreslå en funktionell men tvivelaktig produkt som dialogstartare. Hur hållbara är de objekt som omger oss varje dag? Vad är historien om produkten? Med dessa frågor i huvudet erbjuder den experimentella designtänkande studion breadedEscalope baserad i Wien (Österrike), ett alternativt tillvägagångssätt för design. Alltid starta projekt med produktionsprocessen som en berättelse om formationer, erbjuder unikt och lekfullt resultat till handlingen att designa.
Wynn, David Charles. "Model-based approaches to support process improvement in complex product development." Thesis, University of Cambridge, 2007. https://www.repository.cam.ac.uk/handle/1810/237006.
Повний текст джерелаGudur, Raghavendra Reddy. "Approaches to designing for older adults' intuitive interaction with complex devices." Thesis, Queensland University of Technology, 2012. https://eprints.qut.edu.au/58070/1/Raghavendra_Gudur_Thesis.pdf.
Повний текст джерелаWatz, Matilda. "Utilizing requirements to support sustainable product development : Introductory approaches for strategic sustainability integration." Licentiate thesis, Blekinge Tekniska Högskola, Institutionen för strategisk hållbar utveckling, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-18807.
Повний текст джерелаLINDGREN, NATALIA, and MORTENSEN JULIA HEDE. "Product development in low income markets : Identifying user needs and approaches in design in a low income market, with focus on the water filtration market in Malaysia." Thesis, KTH, Produkt- och tjänstedesign, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-234254.
Повний текст джерелаVattensituationen i Malaysia är inte ideal. På grund av den dåliga kvalitén av kranvatten, har efterfrågan av vattenfilter för hemmabruk i Malaysia ökat. Samtidigt beskrivs 40 procent av Malaysias befolkning som en del av en låginkomstgrupp som är särskilt sårbara för ökade levnadskostnader. Att utveckla produkter som möter behoven hos konsumenter som är begränsade i ekonomiska resurser är avgörande för att förhindra tillväxten av fattigdom och för att uppnå FN:s Millenniemål. För att försäkra att tillgången till rent vatten är uppnåeligt för alla, oavsett inkomstgrupp, måste beprövade metoder inom produktutveckling i tillväxtmarknader med låginkomsttagare som fokusgrupp identifieras. Målet av denna studie är att identifiera och utvärdera vissa av de existerande modellerna och metoderna inom detta område genom grundliga studier och en fallstudie. Huvudfokus ligger på att analysera metoder för att identifiera användarbehov samt konceptualisering och utformning av produkter för låginkomstgrupper. En omfattande litteraturstudie har gjorts samt intervjuer med Ingenjörer utan gränser. Resultatet från intervjuena visade på att inga specifika metoder användes frekvent utan varje project utformades på eget vis. Detta resultat applicerades sedan på ett fältarbete i Kuala Lumpur, Malaysia. Projektet var i samarbete med företaget Blöndal, ett vattenfilterföretag med huvudkontor i Kuala Lumpur. Deras så kallade “point of use”-vattenfilter, vid namn Källa 8, vidareutvecklades med de identifierade modellerna och metoderna från förstudien som ledsagare. Före vidareutvecklingen av Källa 8, identifierades användarbehoven genom enkätundersökningar, hembesök och kortare intervjuer. För att översätta de identifierade användarbehoven till faktiska produktegenskaper, utarbetades en så kallad House of Quality-matris som sedan användes som diskussionsunderlag under konceptualiseringen av det nya Källa 8. Tankesättet som användes under utformningen av den nya produkten härleddes av konceptet Frugal Innovation. Frugal Innovation visade sig vara en värdefull teoretisk ramverk, men var inte så lätt att implementera på just denna fallstudie. Resultaten från marknadsanalysen visade tydligt att produkten kostade för mycket men att den yttre designen var attraktiv och viktig för låginkomstgrupper. Dessa attribut realiserades i produkten genom att främst förändra konfigurationen av rören i produkten. Anledningen till detta var att minska underhållskostnader för användaren, eftersom hen själv ska kunna byta ut filtrena. Detta gjordes utan att större förändringar på produktens högst värderade egenskaper.
Kriett, Phillip Oliver [Verfasser], Martin [Akademischer Betreuer] Grunow, Hubert [Gutachter] Missbauer, and Martin [Gutachter] Grunow. "Optimization-based approaches for product platform design, production planning, and capacity modeling in semiconductor supply chains / Phillip Oliver Kriett ; Gutachter: Hubert Missbauer, Martin Grunow ; Betreuer: Martin Grunow." München : Universitätsbibliothek der TU München, 2020. http://d-nb.info/1221719254/34.
Повний текст джерелаSerna, Rodas Juliana. "Methodological approach for the sustainable design of structured chemical products during early design stages." Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0219.
Повний текст джерелаEmulsion based chemical products, which belong to the category of micro-structured chemical products, have a broad range of commercial applications. Despite their importance, there is not a general methodology for their design. With the aim to contribute to the progress on this matter, this research presents a product design methodology focused on emulsion design with the following characteristics: it proposes methods for customer needs analysis, product ideas generation and selection of the best product alternative. It considers the multivariate nature of emulsion design by taking into account the multiple effects of design variables into product properties. It integrates sustainability concepts into the product design process. The methodology comprises three design stages: needs stage, ideas generation stage and ideas selection stage. In the needs stage, customer needs are first analyzed and classified according to their effect on customer satisfaction and second translated into product specifications with the aid of experts and customers. The input is customer needs, i.e., statements expressing customers’ desires about the product, and the output corresponds to product specifications, i.e., product characteristics that can be measured. To perform this stage two methods are used: Kano model and Quality Functional Deployment. In ideas generation stage, product concepts accomplishing product specifications are generated in three sub-steps: First, problem specifications are classified into a predefined group of design sub-problems. Second, each sub-problem is connected with one or more pre-defined solution strategies through a prefilled relational matrix. Third, compatible solution strategies are selected and connected to ingredients and processing conditions through a second relational matrix. As result, a set of product concepts is generated. Thisprocedure is developed by the implementation of two relational matrices proposed in this research based on emulsion science and expert knowledge. The first connects sub-problems with solution strategies and the second connects solution strategies with ingredients and processing conditions. In the selection stage, generated product concepts are evaluated according to product specifications. In addition, appropriated sustainability indicators are included to assess and rank product alternatives according to a global sustainability index. To perform this stage, a set of indicators are selected and integrated by the implementation of multi-criteria analysis methods. The application of the methodology is exposed with a case study: the design of a moisturizing cream
Chamberlain, Matthew Kipp. "An Approach to Decision Support for Strategic Redesign." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19838.
Повний текст джерелаWyatt, David Finlay. "Developing a computational approach to support product architecture design." Thesis, University of Cambridge, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.609700.
Повний текст джерелаMingard, P. "Design constraints : An historical approach." Thesis, Brunel University, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378449.
Повний текст джерелаSahin, Asli. "A Data Clustering Approach to Support Modular Product Family Design." Diss., Virginia Tech, 2007. http://hdl.handle.net/10919/29481.
Повний текст джерелаPh. D.
Davis, Kara, Pinar Öncel, and Qingqing Yang. "An Innovation Approach for Sustainable Product and Product-Service System Development." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2023.
Повний текст джерелаMesser, Matthias. "A systematic approach for integrated product, materials, and design-process design." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22608.
Повний текст джерелаCommittee Chair: Allen, Janet K.; Committee Member: Aidun, Cyrus K.; Committee Member: Klein, Benjamin; Committee Member: McDowell, David L.; Committee Member: Mistree, Farrokh; Committee Member: Yoder, Douglas P.
Cohen, Tal. "A data approach to tracking and evaluating engineering changes." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17971.
Повний текст джерелаYang, Hong Mo. "An approach to product design using a product performance versus cost model." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/13418.
Повний текст джерелаIncludes bibliographical references (leaf 73).
by Hong Mo Yang.
M.S.
Mohd, Saad Norhairin. "A3 thinking approach to support lean product and process development." Thesis, Cranfield University, 2013. http://dspace.lib.cranfield.ac.uk/handle/1826/7963.
Повний текст джерелаChen, Chien-Bang. "An approach to empathic design for assistive technology." Thesis, De Montfort University, 2012. http://hdl.handle.net/2086/9027.
Повний текст джерелаPedersen, Kjartan. "Designing platform families : an evolutionary approach to developing engineering systems." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18189.
Повний текст джерелаSiu, Power Po Wa. "Development of a building configurator : product family architecture approach /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?IEEM%202005%20SIU.
Повний текст джерелаTahir, Muhammad Rehan. "A new approach to product development in Islamic finance." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/47878.
Повний текст джерела"September 2008." Title page has the copyright date of 1994.
Includes bibliographical references.
Islamic Finance is a banking sector which caters to the Muslim population's banking needs by complying with the Islamic financial law. In this research some of the most prevalent financial products in Islamic Finance are surveyed and various forms of Islamic asset securitizations (Sukuks) are studied. Two issues of Islamic asset securitizations (Sukuks) are analyzed in detail. This analysis involves determining how well Sukuks serve the needs of Islamic Finance customers and also their shortcomings. In order to develop more customer-need centric financial products in Islamic Finance a new product development template is proposed. This template is a step-by-step process of developing Islamic financial products and is derived from the best practices of product development in the engineering domain. This methodology aims to formalize and improve the product development process in Islamic Finance. As an illustration of the proposed template, a new product is developed for Islamic Finance using this template. This example illustrates how religious restrictions in Islamic Finance dictate the form and substance of financial products during their development.
by Muhammad Rehan Tahir.
S.M.
Rose, Elliot P. "Environmentally conscious design : an economic life cycle approach." Thesis, Cranfield University, 1997. http://dspace.lib.cranfield.ac.uk/handle/1826/3507.
Повний текст джерелаEkandem, Joshua Ime Asukwo Lau Tin-Man. "Designing fo cultures an approach for product design using components of regional culture /." Auburn, Ala., 2009. http://hdl.handle.net/10415/1877.
Повний текст джерелаPutkonen, A. (Ari). "Macroergonomic approach applied to work system modelling in product development contexts." Doctoral thesis, University of Oulu, 2010. http://urn.fi/urn:isbn:9789514262371.
Повний текст джерелаThorslund, Gustav. "Stroller Service System : How to make customer products sustainable within the planetary boundaries - using the case product ‘stroller’, PSS and a Design Thinking approach." Thesis, Linköpings universitet, Maskinkonstruktion, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-160003.
Повний текст джерелаRoesler, Axel. "A compositional based approach to 3-dimensional form generation in product design based on music." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1391699743.
Повний текст джерелаBorg, Jonathan C. "Design synthesis for Multi-X : a 'life-cycle consequence knowledge' approach." Thesis, University of Strathclyde, 1999. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21440.
Повний текст джерелаSrivali, Nahathai. "New approach to drug product process design : leveraging first principles modeling and cross-product process monitoring to improve process design robustness." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99039.
Повний текст джерелаThesis: S.M., Massachusetts Institute of Technology, Engineering Systems Division, 2015. In conjunction with the Leaders for Global Operations Program at MIT.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 88-89).
Abstract The vision of the Operations Technology Group at Amgen is to enable a robust pipeline through focused and efficient operations research studies. Process design is traditionally developed by performing experiments, but other approaches can be used to improve cost, efficiency, and robustness. The scope of this internship included the use of First Principles, Computational Fluid Dynamics (CFD), and Cross-Product Process Monitoring (CPPM) to improve process design robustness with reduced testing and faster development cycle. The project focused specifically on the drug product development network, which included the development of processes from formulation to filling and finishing, clinical manufacturing, and technology transfer to commercial manufacturing The goal of this internship was to explore opportunities to utilize First Principles, CFD, and CPPM in drug product process design space. First Principles and CFD modeling tools were used to look into the physics of drug product filling process (specifically parameters influencing two key filling issues - drying during line stoppage and dripping between fills). Criteria for analyzing cost and benefits for the use of First Principles were also provided as strategic recommendations on where the new approach should be utilized. Clinical data were leveraged, with multivariate statistical data analysis, to determine inspection reject limit for the purpose of process monitoring and root cause analysis.
by Nahathai Srivali.
M.B.A.
S.M.
Matthews, Jason Anthony. "A constraint-based approach for assessing the capabilities of existing designs to handle product variation." Thesis, University of Bath, 2007. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.486841.
Повний текст джерелаMedeiros, Flávio Mota. "SOPLE-DE: an approach to design service-oriented product line architectures." Universidade Federal de Pernambuco, 2010. https://repositorio.ufpe.br/handle/123456789/2416.
Повний текст джерелаConselho Nacional de Desenvolvimento Científico e Tecnológico
O reuso de software é um fator extremamente importante para empresas interessadas em aumentar sua produtividade, diminuir os custos e o tempo durante o desenvolvimento de sistemas e melhorar a qualidade de seus produtos e serviços. Nesse contexto, Linhas de Produto de Software (LPS) e Arquitetura Orientada a Serviços (SOA) são duas estratégias que estão atualmente recebendo uma grande atenção, tanto na área acadêmica quanto na indústria de software. Os conceitos de linhas de produto e arquitetura orientada a serviços compartilham alguns objetivos e características que podem ser usados em conjunto para aumentar as taxas de reuso de software. No entanto, para o resultado dessa junção ser otimizado, é necessário utilizar um processo de desenvolvimento bem definido. Caso contrário, a equipe de desenvolvimento poderá produzir software de maneira não sistemática, aumentando as chances de falha, o tempo e o custo de desenvolvimento. Com essa visão, esse trabalho apresenta uma abordagem para o projeto de arquiteturas para linhas de produto orientada a serviços, constituída de um conjunto de atividades e sub atividades com entradas e saídas especificadas, sendo cada uma delas realizada por um conjunto predefinido de papéis com responsabilidades definidas. Essa abordagem visa ajudar arquitetos de software a projetar arquitetura orientada a serviços para domínios específicos. Para garantir a qualidade da abordagem desenvolvida, uma pesquisa extensiva foi realizada para analisar o atual estado da arte de processos para o desenvolvimento orientado a serviços. Foram então considerados os pontos fracos e fortes dos processos estudados com o intuito de identificar e preencher as lacunas neles existentes. Por fim, essa abordagem foi validada e refinada por meio de um estudo acadêmico experimental preliminar
Speidel, Joshua A. "Computational approaches to structure based ligand design : an illustration for P/CAF bromodomain ligands /." Access full-text from WCMC, 2007. http://proquest.umi.com/pqdweb?did=1453183061&sid=21&Fmt=2&clientId=8424&RQT=309&VName=PQD.
Повний текст джерелаMorgan, Jessica. "An Approach for Designing Origami-Adapted Products with Aerospace Mechanism Examples." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5778.
Повний текст джерелаAshok, Sylvester Vikram. "An integrated product – process development (IPPD) based approach for rotorcraft drive system sizing, synthesis and design optimization." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/49128.
Повний текст джерелаMitchell, Sean R. "A feature-based approach to the Computer-Aided Design of sculptured products." Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/35582.
Повний текст джерелаIkonopisov, Anthony. "A concurrent engineering approach to design for assembly with manufactuirng cost constraint." Thesis, De Montfort University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.391540.
Повний текст джерелаTrivedi, Dharti Rajendra. "Beauty lies in the mind of the beholder: A resource matching approach to understanding the halo effectand the aesthetic middle principle." Kent State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=kent1565023601243277.
Повний текст джерелаRobertson, Jason Liu Tsai Lu. "A scalable approach for deciphering core rationales as the foundation of new product development." Auburn, Ala, 2009. http://hdl.handle.net/10415/1642.
Повний текст джерелаMcKellar, Robert W. (Robert William). "Staying nimble : a flexible approach to complex product development in a rigid environment." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/100380.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 65-67).
Incorporating flexibility into business processes can provide organizations with increased agility to respond to uncertainty within complex product development projects spanning across many years and many organizations. Current methods used for determining value in order to justify associated costs for implementing and maintaining process flexibility are not sufficient in capturing the full worth of flexibilities within processes. A framework is developed which builds upon on prior research to assess value of flexibility within product development processes, combining benefits of rigid constraints with flexible options. Valuation of a simple potential flexibility within an aircraft development project is used to demonstrate the use of the framework in practice and to evaluate strengths and weaknesses of the framework. The method of valuation provides benefit of capturing hidden value that would otherwise be ignored or left on the table and provides further insight into the behavior of the process flexibility in a manner which leads to optimization of that flexibility. However, adoption of the framework is hindered by the skillset required in practice along with the inherent inability to demonstrate its full value, as measured by actual performance.
by Robert W. McKellar.
S.M. in Engineering and Management
Mathai, Thomas Kidangalil. "A system dynamics approach for robust product planning and strategy based on simulated market performance." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/91741.
Повний текст джерела"February 2002."
Includes bibliographical references (leaves 97-99).
by Thomas K. Mathai.
S.M.
Fu, Yongxiao. "A haptic-based approach for the conceptual design of multi-material products." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B40987991.
Повний текст джерелаDiaz, Garcia J. Adrian. "Network analysis of technical and organizational configurations : using an alignment approach to enhance product development performance." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/47856.
Повний текст джерелаIncludes bibliographical references (p. 203-212).
In an attempt to improve their Product Development Processes (PDPs), many companies make considerable investments to have available cutting-edge technology such as virtual tools. While some companies have increased their productivity and time to market with them, some others have not. There seem to be fundamental factors above and beyond the use of these tools that can obstruct the PDP and one of them appears to be the misalignment between the product architecture and the organizational interactions of the actors working on it. While there has been significant work addressing the technical and social concerns of a PDP independently, the nature of the misalignment requires an integrated analysis of the product architecture and the organization. The present work studies them in an integrated approach by making use of network analyses. The research for this thesis was conducted in a Global Product Development (GPD) project of an automotive manufacturer. By first using as a reference the Multidisciplinary System Design Optimization (MSDO) to decompose the architecture of a product and then, using a specific type of Design Structure Matrix (DSM) [43] called N2 Diagram to identify the interfaces of the architecture, a network called theoretical sociogram was created. In addition, the relative sensitivity of some objectives describing the functioning of the product's systems was calculated to classify the strength of the ties in two levels: strong for those above an absolute relative sensitivity of 0.5, and weak for those with an absolute relative sensitivity lower or equal than 0.5.
(cont.) Furthermore, through surveys and interviews, the organizational interactions for two different phases of the project were mapped to construct a new set of networks called actual sociograms. By comparing the sociograms and utilizing metrics that deal with the centrality of the actors in the network, the misalignments were identified. The misalignments provided guidance to identify the enablers and obstacles influencing the PDP. It was observed that, in some cases, when the sensitivity among variables was weak, engineering teams tend to use intermediaries to share information. In some other circumstances the direct interaction doesn't occur, due to reasons including cultural aspects, complexity of the information, the way the information is structured and organizational fuzziness, among others. Based on these findings, some recommendations based on literature review, lessons learned from other industries and conversations with Product Development (PD) actors, are provided.
by J. Adrian Diaz Garcia.
S.M.
Kugathasan, Praba. "A feature-based approach to design information management - multiple viewpoint dependent models for the product introduction process." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262727.
Повний текст джерелаZeng, Yong. "Axiomatic approach to the modeling of product conceptual design processes using set theory." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq64894.pdf.
Повний текст джерелаSavas, Sinan. "A systems approach in product design of a novel single-pan scanning calorimeter." Thesis, University of Leicester, 2015. http://hdl.handle.net/2381/31482.
Повний текст джерелаThomas, Ellen. "Antecedents and Outcomes to Implementing a Top-down Approach to Platform Product Design." Diss., Temple University Libraries, 2010. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/99127.
Повний текст джерелаPh.D.
This dissertation investigates causal factors that lead to implementing a top-down approach to platform product design as well as performance outcomes from such a design. A top-down approach to platform product design requires intentional planning of a new platform-based product design during the new product development process, incorporating a level of modularity into the new design, and planning derivative products based on common subsystems and interfaces. A thorough review of literature was used to build a theory of platform product design founded on risks and benefits. Benefits are that platform design can drive revenue, introduce cost and time efficiencies, lead to more reliable products and offer managerial benefits in the form of adjacencies. Risks include increased costs and time to market for the first product, reduced revenue due to commonality, sub-optimal product design, and increased management complexity during the NPD process. A conceptual model was then developed encompassing antecedents, contributing factors, and market performance measures to implementing a top-down approach to new platform product design. The model was empirically tested in the context of U.S. manufacturing firms using data collected from 249 manufacturing product design managers. Respondents included managers from B2B firms and B2C firms as well as small and large firms. In order to test the model, a new continuous multidimensional measurement scale of top-down platform product design was developed. Results showed that market turbulence, technological turbulence, a product that is new to the market and competitive strategies of differentiation and design for supportability are positively related to platform design. Firm type - B2B versus B2C - and firm size - large firms versus small firms - was found to moderate this relationship. Regarding firm type, products that are new to the market are positively related to platform design for B2C firms, not B2B firms, while a competitive strategy of design for supportability is positively related to platform design for B2B firms, not B2C firms. Regarding firm size, a competitive strategy of design for supportability is positively related to platform design for large firms, not small firms. These findings suggest that an important predictor of top-down platform design is risk or uncertainty. Results also showed that top-down platform product design is positively related to both short term and long term market performance although this relationship is significantly greater for long term market performance. In the short-term, performance as measured by sales and market share was greater than performance as measured by profits. In the long-term, performance measured by sales and profits was greater than performance measured by market share. Organizational support in the form of management buy-in and cross-functional integration partially mediates the relationship between platform design and long term market performance. Finally, strategic flexibility was found to have an inverse relationship with top-down platform down. Firms lacking strategic flexibility were more likely to pursue a top-down platform design. This is in line with findings that suggest top-down platform design is undertaken when uncertainty is high and strategic flexibility is an advantage These findings contradict conventional wisdom in new product development literature and offer a better understanding of why platform design is important in a way that has not been previously defined.
Temple University--Theses
Roa, Seungwan. "Internet interpersonal communications : an industrial design approach to interfaces and products." Thesis, Goldsmiths College (University of London), 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.406790.
Повний текст джерелаFu, Yongxiao, and 傅永霄. "A haptic-based approach for the conceptual design of multi-material products." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B40987991.
Повний текст джерелаЄвстаф`єва, Єлизавета Олегівна, Елизавета Олеговна Евстафьева, and Yelyzaveta Olehivna Yevstafieva. "Synergetic approach to the description of realization of the product at the stages of design, manufacturing and operation." Thesis, Sumy State University, 2016. http://essuir.sumdu.edu.ua/handle/123456789/46914.
Повний текст джерелаMatschewsky, Johannes. "What’s in it for the Provider? : A Lifecycle-Focused Approach towards Designing for Value in Product-Service Systems." Licentiate thesis, Linköpings universitet, Industriell miljöteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-130977.
Повний текст джерела