Статті в журналах з теми "Printed Periodic Metallic Geometries"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Printed Periodic Metallic Geometries".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Sujatha, M. N., and Vijeshree Kadiya. "A subcell based approach for enhancing the absorption bandwidth of microwave absorbers using printed periodic metallic geometries." Engineering Science and Technology, an International Journal 22, no. 1 (February 2019): 385–90. http://dx.doi.org/10.1016/j.jestch.2018.08.008.
Повний текст джерелаGáspár, Igor, and Réka Neczpál. "Testing of 3D Printed Turbulence Promoters for Membrane Filtration." Periodica Polytechnica Chemical Engineering 64, no. 3 (May 25, 2020): 371–76. http://dx.doi.org/10.3311/ppch.15211.
Повний текст джерелаZhao, Zijian, Guang Yang, and Kun Zhao. "3D Printing of Mg-Based Bulk Metallic Glasses with Proper Laser Power and Scanning Speed." Metals 12, no. 8 (August 5, 2022): 1318. http://dx.doi.org/10.3390/met12081318.
Повний текст джерелаWang, Jun, Rahul Rai, and Jason N. Armstrong. "Investigation of compressive deformation behaviors of cubic periodic cellular structural cubes through 3D printed parts and FE simulations." Rapid Prototyping Journal 26, no. 3 (November 17, 2019): 459–72. http://dx.doi.org/10.1108/rpj-03-2019-0069.
Повний текст джерелаSu, Huanhuan, Shan Wu, Yuhan Yang, Qing Leng, Lei Huang, Junqi Fu, Qianjin Wang, Hui Liu, and Lin Zhou. "Surface plasmon polariton–enhanced photoluminescence of monolayer MoS2 on suspended periodic metallic structures." Nanophotonics 10, no. 2 (November 24, 2020): 975–82. http://dx.doi.org/10.1515/nanoph-2020-0545.
Повний текст джерелаSangiorgio, Valentino, Fabio Parisi, Francesco Fieni, and Nicola Parisi. "The New Boundaries of 3D-Printed Clay Bricks Design: Printability of Complex Internal Geometries." Sustainability 14, no. 2 (January 6, 2022): 598. http://dx.doi.org/10.3390/su14020598.
Повний текст джерелаAgyapong, Johnson N., Bo Van Durme, Sandra Van Vlierberghe, and James H. Henderson. "Surface Functionalization of 4D Printed Substrates Using Polymeric and Metallic Wrinkles." Polymers 15, no. 9 (April 28, 2023): 2117. http://dx.doi.org/10.3390/polym15092117.
Повний текст джерелаLee, Sung-Ho, Sang-Yoon Gee, Chul Kang, and Chul-Sik Kee. "Terahertz Wave Transmission Properties of Metallic Periodic Structures Printed on a Photo-paper." Journal of the Optical Society of Korea 14, no. 3 (September 25, 2010): 282–85. http://dx.doi.org/10.3807/josk.2010.14.3.282.
Повний текст джерелаKim, Jiho, and Dong-Jin Yoo. "3D printed compact heat exchangers with mathematically defined core structures." Journal of Computational Design and Engineering 7, no. 4 (April 7, 2020): 527–50. http://dx.doi.org/10.1093/jcde/qwaa032.
Повний текст джерелаZhai, Guohua, Yong Cheng, Qiuyan Yin, Shouzheng Zhu, and Jianjun Gao. "Uniplanar Millimeter-Wave Log-Periodic Dipole Array Antenna Fed by Coplanar Waveguide." International Journal of Antennas and Propagation 2013 (2013): 1–5. http://dx.doi.org/10.1155/2013/430618.
Повний текст джерелаLegett, Shelbie A., Xavier Torres, Andrew M. Schmalzer, Adam Pacheco, John R. Stockdale, Samantha Talley, Tom Robison, and Andrea Labouriau. "Balancing Functionality and Printability: High-Loading Polymer Resins for Direct Ink Writing." Polymers 14, no. 21 (November 1, 2022): 4661. http://dx.doi.org/10.3390/polym14214661.
Повний текст джерелаDallacasa, Valerio. "Diffraction Effects in the Propagation of Radiation in Polarizable Layers." Journal of Nanoscience and Nanotechnology 8, no. 2 (February 1, 2008): 595–601. http://dx.doi.org/10.1166/jnn.2008.d084.
Повний текст джерелаGoussetis, G., A. P. Feresidis, and J. C. Vardaxoglou. "Tailoring the AMC and EBG Characteristics of Periodic Metallic Arrays Printed on Grounded Dielectric Substrate." IEEE Transactions on Antennas and Propagation 54, no. 1 (January 2006): 82–89. http://dx.doi.org/10.1109/tap.2005.861575.
Повний текст джерелаSugino, Christopher, Romain Gerbe, Ehren Baca, Charles Reinke, Massimo Ruzzene, Alper Erturk, and Ihab El-kady. "Machined phononic crystals to block high-order Lamb waves and crosstalk in through-metal ultrasonic communication systems." Applied Physics Letters 120, no. 19 (May 9, 2022): 191705. http://dx.doi.org/10.1063/5.0083380.
Повний текст джерелаFelix, Levi C., Vladimir Gaál, Cristiano F. Woellner, Varlei Rodrigues, and Douglas S. Galvao. "Mechanical Properties of Diamond Schwarzites: From Atomistic Models to 3D-Printed Structures." MRS Advances 5, no. 33-34 (2020): 1775–81. http://dx.doi.org/10.1557/adv.2020.175.
Повний текст джерелаAl-Ketan, Oraib, Reza Rowshan, and Rashid K. Abu Al-Rub. "Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials." Additive Manufacturing 19 (January 2018): 167–83. http://dx.doi.org/10.1016/j.addma.2017.12.006.
Повний текст джерелаNitoi, Alexandra, Mihai Alin Pop, Ting Ting Peng, Tibor Bedő, Sorin Ion Munteanu, Ioana Ghiuta, and Daniel Munteanu. "Build Orientation Influence on some Mechanical Properties of 3D-Printed Polyamide Specimens." Advanced Engineering Forum 34 (October 2019): 3–9. http://dx.doi.org/10.4028/www.scientific.net/aef.34.3.
Повний текст джерелаLiu, Yuchun, Swee Leong Sing, Rebecca Xin En Lim, Wai Yee Yeong, and Bee Tin Goh. "Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model." International Journal of Bioprinting 8, no. 1 (January 28, 2022): 476. http://dx.doi.org/10.18063/ijb.v8i1.476.
Повний текст джерелаMa, Quoc-Phu, Jakub Mesicek, Frantisek Fojtik, Jiri Hajnys, Pavel Krpec, Marek Pagac, and Jana Petru. "Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method." Materials 15, no. 17 (September 1, 2022): 6057. http://dx.doi.org/10.3390/ma15176057.
Повний текст джерелаNguyen, Lan. "A MIMO Antenna with Enhanced Gain using Metasurface." Applied Computational Electromagnetics Society 36, no. 4 (May 10, 2021): 458–64. http://dx.doi.org/10.47037/2020.aces.j.360412.
Повний текст джерелаNóbrega, Clarissa de Lucena, Marcelo Ribeiro da Silva, Paulo Henrique da Fonseca Silva, Adaildo Gomes D’Assunção, and Gláucio Lima Siqueira. "Simple, Compact, and Multiband Frequency Selective Surfaces Using Dissimilar Sierpinski Fractal Elements." International Journal of Antennas and Propagation 2015 (2015): 1–5. http://dx.doi.org/10.1155/2015/614780.
Повний текст джерелаTeng, Fei, Ching-Heng Shiau, Cheng Sun, Robert C. O’Brien, and Michael D. McMurtrey. "Investigation of Deformation Behavior of Additively Manufactured AISI 316L Stainless Steel with In Situ Micro-Compression Testing." Materials 16, no. 17 (August 31, 2023): 5980. http://dx.doi.org/10.3390/ma16175980.
Повний текст джерелаShams, M., Z. Mansurov, C. Daulbayev, and B. Bakbolat. "Effect of Lattice Structure and Composite Precursor on Mechanical Properties of 3D-Printed Bone Scaffolds." Eurasian Chemico-Technological Journal 23, no. 4 (December 31, 2021): 257. http://dx.doi.org/10.18321/ectj1129.
Повний текст джерелаFlorencio, Rafael, Álvaro Somolinos, Iván González, and Felipe Cátedra. "BICGSTAB-FFT Method of Moments with NURBS for Analysis of Planar Generic Layouts Embedded in Large Multilayer Structures." Electronics 9, no. 9 (September 9, 2020): 1476. http://dx.doi.org/10.3390/electronics9091476.
Повний текст джерелаPeng, Pei-Wen, Jen-Chang Yang, Wei-Fang Lee, Chih-Yuan Fang, Chun-Ming Chang, I.-Jan Chen, Chengpo Hsu, and Tzu-Sen Yang. "Effects of Heat Treatment of Selective Laser Melting Printed Ti-6Al-4V Specimens on Surface Texture Parameters and Cell Attachment." Applied Sciences 11, no. 5 (March 3, 2021): 2234. http://dx.doi.org/10.3390/app11052234.
Повний текст джерелаXu, Peng, Wei Xiang Jiang, Xiao Cai, Yue Gou, and Tie Jun Cui. "A high-efficiency and ultrathin transmission-type circular polarization converter based on surface structure." EPJ Applied Metamaterials 8 (2021): 4. http://dx.doi.org/10.1051/epjam/2021002.
Повний текст джерелаMandache, Catalin, Richard Desnoyers, and Yan Bombardier. "Crack Growth Monitoring with Structure-Bonded Thin and Flexible Coils." Sensors 22, no. 24 (December 17, 2022): 9958. http://dx.doi.org/10.3390/s22249958.
Повний текст джерелаCuesta, I. I., A. Díaz, M. A. Rojo, L. B. Peral, J. Martínez, and J. M. Alegre. "Parameter Optimisation in Selective Laser Melting on C300 Steel." Applied Sciences 12, no. 19 (September 28, 2022): 9786. http://dx.doi.org/10.3390/app12199786.
Повний текст джерелаParedes, Ferran, Cristian Herrojo, Ana Moya, Miguel Berenguel Alonso, David Gonzalez, Pep Bruguera, Claudia Delgado Simao, and Ferran Martín. "Electromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity." Sensors 22, no. 5 (March 5, 2022): 2044. http://dx.doi.org/10.3390/s22052044.
Повний текст джерелаZafar, Mudasar, Hamzah Sakidin, Mikhail Sheremet, Iskandar B. Dzulkarnain, Abida Hussain, Roslinda Nazar, Javed Akbar Khan, et al. "Recent Development and Future Prospective of Tiwari and Das Mathematical Model in Nanofluid Flow for Different Geometries: A Review." Processes 11, no. 3 (March 10, 2023): 834. http://dx.doi.org/10.3390/pr11030834.
Повний текст джерелаEvsevleev, Sergei, Tatiana Mishurova, Dmitriy Khrapov, Aleksandra Paveleva, Dietmar Meinel, Roman Surmenev, Maria Surmeneva, Andrey Koptyug, and Giovanni Bruno. "X-ray Computed Tomography Procedures to Quantitatively Characterize the Morphological Features of Triply Periodic Minimal Surface Structures." Materials 14, no. 11 (June 1, 2021): 3002. http://dx.doi.org/10.3390/ma14113002.
Повний текст джерелаWu, Wenjing, Bo Yuan, and Aiting Wu. "A Quad-Element UWB-MIMO Antenna with Band-Notch and Reduced Mutual Coupling Based on EBG Structures." International Journal of Antennas and Propagation 2018 (2018): 1–10. http://dx.doi.org/10.1155/2018/8490740.
Повний текст джерелаSancho, R., F. Galvez, C. L. Garrido, S. Perosanz-Amarillo, and D. Barba. "On the mechanical behaviour of additively manufactured metamaterials under dynamic conditions." EPJ Web of Conferences 250 (2021): 05006. http://dx.doi.org/10.1051/epjconf/202125005006.
Повний текст джерелаKoplin, Christof, Eric Schwarzer-Fischer, Eveline Zschippang, Yannick Marian Löw, Martin Czekalla, Arthur Seibel, Anna Rörich, et al. "Design of Reliable Remobilisation Finger Implants with Geometry Elements of a Triple Periodic Minimal Surface Structure via Additive Manufacturing of Silicon Nitride." J 6, no. 1 (March 18, 2023): 180–97. http://dx.doi.org/10.3390/j6010014.
Повний текст джерелаDing, Liping, Shujie Tan, Wenliang Chen, Yaming Jin, and Yicha Zhang. "Manufacturability analysis of extremely fine porous structures for selective laser melting process of Ti6Al4V alloy." Rapid Prototyping Journal 27, no. 8 (August 25, 2021): 1523–37. http://dx.doi.org/10.1108/rpj-11-2020-0280.
Повний текст джерелаHsu, Yu-Chuan, Zhenze Yang, and Markus J. Buehler. "Generative design, manufacturing, and molecular modeling of 3D architected materials based on natural language input." APL Materials 10, no. 4 (April 1, 2022): 041107. http://dx.doi.org/10.1063/5.0082338.
Повний текст джерелаModir, Alireza, Arnaud Casterman, and Ibrahim Tansel. "Detection of Anomalies in Additively Manufactured Metal Parts Using CNN and LSTM Networks." Recent Progress in Materials 05, no. 03 (July 26, 2023): 1–20. http://dx.doi.org/10.21926/rpm.2303028.
Повний текст джерелаFerro, Paolo, Alberto Fabrizi, Hamada Elsayed, and Gianpaolo Savio. "Multi-Material Additive Manufacturing: Creating IN718-AISI 316L Bimetallic Parts by 3D Printing, Debinding, and Sintering." Sustainability 15, no. 15 (August 2, 2023): 11911. http://dx.doi.org/10.3390/su151511911.
Повний текст джерелаAl Ajmi, Haitham, Mohammed Bait-Suwailam, Mahmoud Masoud, and Muhammad Shafiq. "EFFICIENCY ENHANCEMENT OF PHOTOVOLTAIC SOLAR CELLS USING METAMATERIALS ABSORBING SCREEN." Journal of Engineering Research [TJER] 19, no. 2 (April 5, 2023): 85–94. http://dx.doi.org/10.53540/tjer.vol19iss2pp85-94.
Повний текст джерелаEllebracht, Nathan C., Pratanu Roy, Thomas Moore, Aldair E. Gongora, Diego I. Oyarzun, Joshuah K. Stolaroff, and Du T. Nguyen. "3D printed triply periodic minimal surfaces as advanced structured packings for solvent-based CO2 capture." Energy & Environmental Science, 2023. http://dx.doi.org/10.1039/d2ee03658d.
Повний текст джерелаXiong, Yichen, and Bing Zhang. "A metallic 3D printed miniaturized circularly polarized log periodic Koch‐dipole array antenna." International Journal of RF and Microwave Computer-Aided Engineering 31, no. 7 (April 9, 2021). http://dx.doi.org/10.1002/mmce.22684.
Повний текст джерелаMałachowska, A., Ł. Żrodowski, B. Morończyk, Ł. Maj, A. Kuś, and T. Lampke. "Selective Laser Melting of Fe-Based Metallic Glasses With Different Degree of Plasticity." Metallurgical and Materials Transactions A, December 8, 2022. http://dx.doi.org/10.1007/s11661-022-06913-w.
Повний текст джерелаRomero, Pablo E., Juan M. Barrios, Esther Molero, and Andres Bustillo. "Tuning 3D-printing parameters to produce vertical ultra-hydrophobic PETG parts with low ice adhesion: A food industry case study." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, June 6, 2023, 095440542311789. http://dx.doi.org/10.1177/09544054231178970.
Повний текст джерелаLi, Tiantian, and Yaning Li. "Prediction of the Anisotropy of Chiral Mechanical Metamaterials via Micropolar Modeling." Journal of Applied Mechanics, August 24, 2022, 1–21. http://dx.doi.org/10.1115/1.4055349.
Повний текст джерелаWang, C., S. Chandra, X. P. Tan, and S. B. Tor. "3D printing of metallic micro-gears for micro-fluidic applications." Journal of Micromechanics and Molecular Physics 06, no. 02 (June 2021). http://dx.doi.org/10.1142/s2424913021410022.
Повний текст джерелаTang, Shiwei, Qiong He, Shiyi Xiao, Xueqin Huang, and Lei Zhou. "Fractal plasmonic metamaterials: physics and applications." Nanotechnology Reviews 4, no. 3 (January 1, 2015). http://dx.doi.org/10.1515/ntrev-2014-0025.
Повний текст джерелаNoroozi, Reza, Farzad Tatar, Ali Zolfagharian, Roberto Brighenti, Mohammad Amin Shamekhi, Abbas Rastgoo, Amin Hadi, and Mahdi Bodaghi. "Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds: Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches." International Journal of Bioprinting 8, no. 3 (May 7, 2022). http://dx.doi.org/10.18063/ijb.v8i3.556.
Повний текст джерелаSankineni, Rakesh, and Y. Ravi Kumar. "Evaluation of energy absorption capabilities and mechanical properties in FDM printed PLA TPMS structures." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, August 18, 2021, 095440622110395. http://dx.doi.org/10.1177/09544062211039530.
Повний текст джерелаLiu, Bingyan, Shirong Liu, Vasanthan Devaraj, Yuxiang Yin, Yueqi Zhang, Jingui Ai, Yaochen Han, and Jicheng Feng. "Metal 3D nanoprinting with coupled fields." Nature Communications 14, no. 1 (August 15, 2023). http://dx.doi.org/10.1038/s41467-023-40577-3.
Повний текст джерелаPederson, Mark R., and Warren E. Pickett. "Theoretical Investigation of Fluorinated and Hydrocenated Diamond <100> Filks." MRS Proceedings 270 (1992). http://dx.doi.org/10.1557/proc-270-389.
Повний текст джерела