Книги з теми "Pressure pipelines"

United States International Trade Commission. In the matter of certain pressure transmitters: Investigation no. 337-TA-304 : temporary relief (Commission decision of March 19, 1990). Washington, DC: U.S. International Trade Commission, 1991.

Commission, United States International Trade. In the matter of certain pressure transmitters: Investigation no. 337-TA-304 : temporary relief (Commission decision of March 19, 1990). Washington, DC: U.S. International Trade Commission, 1991.

American Society of Mechanical Engineers. Hydrogen piping and pipelines: ASME Code for Pressure Piping, B31. New York, NY: American Society of Mechanical Engineers, 2009.

Magda, Waldemar. Akumulacja ciśnienia porowego wokół rurociągu podmorskiego zagłębionego w dnie. Gdańsk: Wydawn. Politechniki Gdańskiej, 2006.

ASME B31 Committee. Gas transmission and distribution piping systems: ASME code for pressure piping, B31. New York, N.Y: American Society of Mechanical Engineers, 1999.

H, Atkinson J., ed. Guide to the design of thrust blocks for buried pressure pipelines. London: Construction Industry Research and Information Association, 1994.

Power piping. New York: The Society, 1995.

United States. National Transportation Safety Board. Over-pressure of Peoples Gas Light and Coke Company low-pressure distribution system, Chicago, Illinois, January 17, 1992. Washington, D.C: National Transportation Safety Board, 1993.

United States. National Transportation Safety Board. Over-pressure of Peoples Gas Light and Coke Company low-pressure distribution system, Chicago, Illinois, January 17, 1992. Washington, D.C: National Transportation Safety Board, 1993.

Board, United States National Transportation Safety. Over-pressure of Peoples Gas Light and Coke Company low-pressure distribution system, Chicago, Illinois, January 17, 1992. Washington, D.C: National Transportation Safety Board, 1993.

Pressure, Vessels and Piping Conference (1993 Denver Colo ). Seismic modal analysis and system interaction: Presented at the 1993 Pressure Vessels and Piping Conference, Denver, Colorado, July 25-29, 1993. New York: ASME, 1993.

American Society of Mechanical Engineers. Power piping: ASME code for pressure piping, B31. 2nd ed. New York: American Society of Mechanical Engineers, 2001.

ASME B31 Committee. Manual for determining the remaining strength of Corroded pipelines: A supplement to ANSI/ASME B31 Code for pressure piping. New York: American Society of Mechanical Engineers, 1985.

Pressure transients in water engineering: A guide to analysis and interpretation of behaviour. London: Thomas Telford, 2008.

American Society of Mechanical Engineers. Manual for determining the remaining strength of corroded pipelines: Supplement to ASME B31 code for pressure piping. New York, N.Y: American Society of Mechanical Engineers, 2009.

Pressure, Vessels and Piping Conference (1990 Nashville Tenn ). Transient thermal hydraulics and resulting loads on vessel and piping systems, 1990: Presented at the 1990 Pressure Vessels and Piping Conference, Nashville, Tennessee, June 17-21, 1990. New York, N.Y: American Society of Mechanical Engineers, 1990.

Pressure Vessels and Piping Conference (2003 Cleveland, Ohio). Seismic engineering--2003: Presented at the 2003 ASME Pressure Vessels and Piping Conference : Cleveland, Ohio, July 20-24, 2003. Edited by Chen J. C. 1938-, Lu S. C, and American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York, N.Y: American Society of Mechanical Engineers, 2003.

Pressure Vessels and Piping Conference (1989 Honolulu, Hawaii). Pipeline dynamics and valves, 1989: Presented at the 1989 ASME Pressure Vessels and Piping Conference, JSME co-sponsorship, Honolulu, Hawaii, July 23-27, 1989. New York, N.Y: American Society of Mechanical Engineers, 1989.

Low pressure liquid pipelines in the North Slope, Greater Prudhoe Bay, Alaska: Hearing before the Committee on Transportation and Infrastructure, House of Representatives, One Hundred Ninth Congress, second session, September 13, 2006. Washington: U.S. G.P.O., 2007.

International, Conference on the Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel Service (1989 Paris France). Interaction of steels with hydrogen in petroleum industry pressure vessel service. New York, N.Y: The Council, 1993.

Woodworth-Lynas, C. M. T. Pressure ridge ice scour experiment (PRISE) phase II progress report. [Calgary, AB: National Energy Board, 1993.

Zappe, R. W. Valve selection handbook: Engineering fundamentals for selecting manual valves, check valves, pressure relief valves, and rupture discs. 4th ed. Houston, Tex: Gulf Pub. Co., 1999.

Ont.) Pressure Vessels and Piping Conference (2012 Toronto. Proceedings of the ASME Pressure Vessels and Piping Conference--2012. New York, N.Y: American Society of Mechanical Engineers, 2012.

France) Pressure Vessels and Piping Conference (2013 Paris. Proceedings of the ASME Pressure Vessels and Piping Conference--2013. New York, N.Y: American Society of Mechanical Engineers, 2014.

Pressure, Vessels and Piping Conference (1985 New Orleans La ). Seismic performance of pipelines and storage tanks: Presented at the 1985 Pressure Vessels and Piping Conference and Exhibition, New Orleans, Louisiana, June 23-26, 1985. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1985.

Pressure, Vessels and Piping Conference (1985 New Orleans La ). Recent advances in seismic design of piping and components: Presented at the 1985 Pressure Vessels and Piping Conference and Exhibition, New Orleans, Louisiana, June 23-26, 1985. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1985.

Staunton, R. H. Aging and service wear of spring-loaded pressure relief valves used in safety-related systems at nuclear power plants. Washington, DC: U.S. Nuclear Regulatory Commission, 1995.

1941-, Anderson L. R., ed. Structural mechanics of buried pipes. Boca Raton, FL: CRC Press, 2000.

Pressure Vessels and Piping Conference (1993 Denver, Colo.). Piping, supports, and structural dynamics: Presented at the 1993 Pressure Vessels and Piping Conference, Denver, Colorado, July 25-29, 1993. New York: ASME, 1993.

ASME Pressure Vessels and Piping Conference--JSME Co-Sponsorship (1989 Honolulu, Hawaii). Design and analysis of piping and components, 1989: Presented at the 1989 ASME Pressure Vessels and Piping Conference - JSME Co-Sponsorship, Honolulu, Hawaii, July 23-27, 1989. Edited by Truong Q. N, Goodling Evans C, Balaschak J. J, Widera G. E. O, and American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1989.

Pressure Vessels and Piping Conference (1992 New Orleans, La.). Seismic ground motions, response, repair, and instrumentation of pipes and bridges: Presented at the 1992 Pressure Vessels and Piping Conference, New Orleans, Louisiana, June 21-25, 1992. New York: American Society of Mechanical Engineers, 1992.

K, Fujita, Hamada M. 1943-, Shinozuka Masanobu, and Ariman Teoman, eds. Earthquake behavior of buried pipelines, storage, telecommunication, and transportation facilities: Presented at the 1989 ASME Pressure Vessels and Piping Conference-JSME Co-Sponsorship, Honolulu, Hawaii, July 23-27, 1989. New York, N.Y: American Society of Mechanical Engineers, 1989.

Javaherdashti, Reza, and Farzaneh Akvan. Hydrostatic Testing, Corrosion, and Microbiologically Influenced Corrosion: A Field Manual for Control and Prevention. Taylor & Francis Group, 2017.

Hydrostatic Testing, Corrosion, and Microbiologically Influenced Corrosion: A Field Manual for Control and Prevention. Taylor & Francis Group, 2017.

High Pressure Technology (P V P). Amer Society of Mechanical, 1999.

F, Sammataro R., American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and Pressure Vessels and Piping Conference (1991 : San Diego, Calif.), eds. Codes and standards and applications for design and analysis of pressure vessel and piping components, 1991: Presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991. New York, N.Y: American Society of Mechanical Engineers, 1991.

Institution of Mechanical Engineers (Great Britain). Pressure Systems Group. and Engineering Inspection Authorities Board, eds. Management of in-service inspection of pressure systems: International conference, 9-10 March 1993, Institution of Mechanical Engineers, Birdcage Walk, London. Bury St. Edmunds, Suffolk [England]: Published for IMechE by Mechanical Engineering Publications, 1993.

D, Roll Eric, Picqueur L. M, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and ASME Pressure Vessels and Piping Conference (1999 : Boston, Massachusetts), eds. High pressure technology-1999: Presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999. New York, N.Y: American Society of Mechanical Engineers, 1999.

High pressure technology-1999: Presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999. New York, N.Y: American Society of Mechanical Engineers, 1999.

M, Picqueur L., Kawahara Mansanori, Kapp J. A, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and Pressure Vessels and Piping Conference (1998 : San Diego, Calif.), eds. High pressure technology, 1998: Presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, California, July 26-30, 1998. New York, N.Y: American Society of Mechanical Engineers, 1998.

Steel Pipelines for High Pressure Gas Transmission (Recommendations on Transmission & Distribution Practice). Institution of Gas Engineers and Managers, 1993.

Codes and standards and applications for high pressure equipment, 1992: Presented at the 1992 Pressure Vessels and Piping Conference, New Orleans, Louisiana, June 21-25, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

J, Bees W., Fisher H. D, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and Pressure Vessels and Piping Conference (1994 : Minneapolis, Minn.), eds. Developments in a progressing technology, 1994: Presented at the 1994 Pressure Vessels and Piping Conference, Minneapolis, Minnesota, June 19-23, 1994. New York, N.Y: American Society of Mechanical Engineers, 1994.

Bees, W. J. Developments in a Progressing Technology, 1994: Presented at the 1994 Pressure Vessels and Piping Conference, Minneapolis, Minnesota, June 19-23, 1994 (Pvp). American Society of Mechanical Engineers, 1994.

System interaction with linear and nonlinear characteristics: Presented at the 1990 Pressure Vessels and Piping Conference, Nashville, Tennessee, June 17-21, 1990. New York, N.Y: American Society of Mechanical Engineers, 1990.

Institution of Mechanical Engineers (Great Britain). Pressure Systems Group., ed. Ageing pipelines: Optimizing the management and operation : low pressure--high pressure : 11-13 October 1999 Newcastle Civic Centre, UK. Bury St Edmunds: Published by Professional Engineering Publishing Limited for the Institution of Mechanical Engineers, 1999.

Steel Pipelines for High Pressure Gas Transmission (Recommendations on Transmission & Distribution Practice S.). 3rd ed. Institution of Gas Engineers and Managers, 1999.

Boldy, A. Pressure Surges and Fluid Transients in Pipelines and Open Channels (BHR Group Conference). Mechanical Engineering Publications, 1996.

Din Handbook 403: Iron and Steel/Quality Standards 3 - Pressure Vessels and Pipelines. Beuth Verlag Gmbh, 1998.

Mehta, H. S. Fatigue and Fracture Mechanics in Pressure Vessels and Piping: Presented at the 1995 Joint Asme/Jsme Pressure Vessels and Piping Conference, Honolulu, (Pvp). American Society of Mechanical Engineers, 1995.