Книги з теми "Powder alloys"

Upadhyaya, G. S. Manganese in powder metallurgy alloys. Paris: Manganese Centre, 1986.

Fine, ME, and EA Starke, eds. Rapidly Solidified Powder Aluminum Alloys. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1986. http://dx.doi.org/10.1520/stp890-eb.

Zhongguo you se jin shu gong ye xie hui, ed. Tong ji tong he jin fen mo yu zhi pin. Changsha Shi: Zhongnan da xue chu ban she, 2010.

Ant͡siferov, V. N. Poroshkovye legirovannye stali. 2nd ed. Moskva: "Metallurgii͡a", 1991.

Birt, Michael J. The fatigue response of high-strength powder route aluminium alloys. Birmingham: University of Birmingham, 1988.

Ghambari, Mohammad. Powder metallurgy alloys for internal combustion engine valve seat inserts. Birmingham: University of Birmingham, 1989.

Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference (2nd 2000 Troy, Mich.). Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference: Proceedings of the Second International Conference on Powder Metallurgy Aluminum & Light Alloys for Automotive Applications. Princeton, N.J: Metal Powder Industries Federation, 2000.

Tkachenko, T. V. Vduvanie poroshkoobraznykh materialov v zhelezouglerodistye rasplavy: Bibliograficheskai͡a︡ informat͡s︡ii͡a︡. Kiev: NTT͡S︡ "MORIS", 1994.

M, Barinov S., Ivanov V. S, and Rykalin N. N, eds. Struktura i razrushenie materialov iz poroshkov tugoplavkikh soedineniĭ. Moskva: Izd-vo "Nauka", 1985.

J, Hildeman Gregory, Koczak Michael J, Metallurgical Society of AIME, and Metallurgical Society of AIME. Fall Meeting, eds. High strength powder metallurgy aluminum alloys II: Proceedings of a TMS-AIME Symposium on "Aluminum Powder Metallurgy" held at the TMS-AIME Fall Meeting, Toronto, Canada, October 13-17 1985. Warrendale, PA: Metallurgical Society, 1986.

Jokinen, Antero. Fabrication and properties of powder metallugical and cast aluminium alloy matrix composite products. Espoo, Finland: Technical Research Centre of Finland, 1993.

Ruuskanen, Pekka. Solid state synthesis of Fe-B-Si alloys. Espoo, Finland: Technical Research Centre of Finland, 1992.

Bonn, Moritz J. Defense, research in powder metallurgy of titanium alloys: Memorandum of understanding between the United States of America and the Federal Republic of Germany, signed at Washington January 8, 1985. Washington, D.C: Dept. of State, 1991.

Ermakov, S. S. Poroshkovye stali i izdelii͡a︡. 4th ed. Moskva: "Mashinostroenie," Leningradskoe otd-nie, 1990.

Huiping, Tang, ed. Fen mo ye jin tai ji jie gou cai liao: Powder metallurgical titanium base structural materials. Changsha Shi: Zhong nan da xue chu ban she, 2012.

Golubet͡s, Vladimir Mikhaĭlovich. Dolgovechnostʹ ėvtekticheskikh pokrytiĭ v korrozionnykh sredakh. Kiev: Nauk. dumka, 1990.

Kondapalli, Satyanarayana. Surface modification of aluminium components by developing composite coatings using plasma powder arc welding process. Aachen: Shaker, 2007.

International Conference on Tungsten and Refractory Metals (5th 2000 Annapolis, MD). Tungsten, hard metals, and refractory alloys 5--2000: Proceedings of the fifth International Conference on Tungsten, Hard Metals and Refractory Alloys sponsored by the Metal Powder Industries Federation in cooperation with the Refractory Metals Association and APMI International, September 25-27, 2000, Loews Annapolis Hotel, Annapolis, Maryland. Princeton, NJ: Metal Powder Industries Federation, 2000.

Sexton, Cornelius L. Rapid alloy scanning by laser cladding. Aachen: Shaker, 1995.

International, Conference on Tungsten Refractory Metals and Alloys (4th 1997 Lake Buena Vista Fla ). Tungsten, refractory metals and alloys 4--1998: Proceedings of the Fourth International Conference on Tungsten, Refractory Metals and Alloys : processing, properties & applications : sponsored by the Metal Powder Industries Federation in cooperation with the Refractory Metals Association and APMI International, November 17-19, 1997, Hotel Royal Plaza - Walt Disney Village, Lake Buena Vista, Florida. Princeton, New Jersey: Metal Powder Industries Federation, 1998.

H, Shingu P., and Funtai Funmatsu Yakin Kyōkai, eds. Mechanical alloying: Proceedings of the International Symposium on Mechanical Alloying held in Kyoto, Japan, May 7-10, 1991. Zürich, Switzerland: Trans Tech Publications, 1992.

European Conference on Advanced Materials and Processes (1st 1989 Aachen, Germany). Advanced materials and processes: Proceedings of the First European Conference on Advanced Materials and Processes, EUROMAT '89. Edited by Exner Hans Eckart, Schumacher V, and Deutsche Gesellschaft für Materialkunde. Oberursel, FRG: DGM Informationsgesellschaft, 1990.

International, Conference on Structural Applications of Mechanical Alloying (2nd 1993 Vancouver B. C. ). Mechanical alloying for structural applications: Proceedings of the 2nd International Conference on Structural Applications of Mechanical Alloying, 20-22 September 1993, Vancouver, British Columbia, Canada. Materials Park, Ohio: ASM International, 1993.

Srivastava, D., and Dinesh Srivastava. Microstructural examination of Zr-2.5%Nb pressure tube S-07 from Kakrapar atomic power station unit-2. Mumbai: Bhabha Atomic Research Centre, 2011.

N, Das. Development of TZM alloy by powder processing routes. Mumbai: Scientific Information Resource Division, Bhabha Atomic Research Centre, 2012.

Stephens, Joseph R. Thermal aging effects in refractory metal alloys. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1986.

Burns, Victoria Sara Jane. The processing of permanent magnets and powders from rare earth/transition metal alloys. Birmingham: University of Birmingham, 1999.

Connolly, J. C. High-power single spatial mode AlGaAs channeled-substrate-planar semiconductor diode lasers for spaceborne communications. Hampton, Va: Langley Research Center, 1989.

Novák, J. Mechanical properties of zirconium alloy cladding tubes and critical fuel element power ramps. Řež, Czechoslovakia: Nuclear Research Institute, Information Centre, 1988.

The Cold War: The great powers and their allies. 2nd ed. Harlow, England: Pearson/Longman, 2008.

Dunbabin, J. P. D. The Cold War: The great powers and their allies. Harlow: Longman, 1994.

Stoner, Troy A. Preparation of Extinction Free Gamma Ti-51at.%Al Alloy Powder and Characterization by X-ray Diffraction. Monterey, California: Naval Postgraduate School, 1992.

China-Japan Symposium on Materials for Advanced Energy Systems and Fission & Fusion Engineering (2002 Lanzhou Shi (China)). Materials for advanced energy systems and fission & fusion engineering: Proceedings of the Seventh China-Japan Symposium. Edited by Wang Z. G, Zhu Z. Y, and Jin G. M. 1943-. River Edge, NJ: World Scientific, 2003.

Symposium, J. on Light-Weight Materials for Transportation (1997 Strasbourg France). Light-weight materials for transportation and batteries and fuel cells for electric vehicles: Proceedings of Symposium J on Light-Weight Materials for Transportation and proceedings of Symposium E on Material Aspects for Electric Vehicles Including Batteries and Fuel Cells of the 1997 ICAM/E-MRS Spring Conference, Strasbourg, France, June 16-20, 1997. Amsterdam: Elsevier, 1997.

How navies fight: The U.S. Navy and its allies. Annapolis, Md: Naval Institute Press, 1994.

Froes, F. H., and Ma Qian. Titanium Powder Metallurgy. Elsevier, 2015.

Ramakrishnan, P. POWDER METALLURGY ALLOYS (Indian Edition Series, 1). Routledge, 2004.

Lee, Peter W., W. E. Frazier, and M. J. Koczak. Low Density, High Temperature Powder Metallurgy Alloys. Tms, 1990.

E, Frazier William, Koczak Michael J, Lee Peter W, and Minerals, Metals and Materials Society. Fall Meeting, eds. Low density, high temperature powder metallurgy alloys. Warrendale, Pa: Minerals, Metals, & Materials Society, 1991.

E, Fine Morris, Starke E. A, and ASTM Committee B-9 on Metal Powders and Metal Powder Products., eds. Rapidly solidified powder aluminum alloys: A symposium. Philadelphia, PA: ASTM, 1986.

Manganese In Powder Metallurgy Steels. Cambridge International Science Publishing, 2012.

Hildeman, G. J. High Strength Powder Metallurgy Aluminum Alloys II: Proceedings. Tms, 1986.

Powder Metallurgy Aluminum & Light Alloys for Automotive Applications, 2000. Metal Powder Industry, 2000.

Jha, Sunil C., and Langley Research Center, eds. Advanced powder metallurgy aluminum alloys via rapid solidification technology: Phase II. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1987.

G, Gurevich I͡U︡, and Akademii͡a︡ nauk SSSR. Uralʹskoe otdelenie., eds. Legirovanie zheleza cherez gazovui͡u︡ khloridnui͡u︡ fazu. Sverdlovsk: UrO AN SSSR, 1992.

Chernenkoff, Russell A. Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference 1998. Metal Powder Industry, 1998.

A, Munitz, and National Institute of Standards and Technology (U.S.), eds. Cold compaction of ball-milled nonograin iron alloys. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

B, Gurganus T., Walker J. A. 1939-, and Langley Research Center, eds. Development and characterization of powder metallurgy (PM) 2XXX series Al alloy products and metal matrix composite (MMC 2XXX Al/SiC materials for high temperature aircraft structural applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Center, Langley Research, ed. Development of powder metallurgy 2XXX series Al plate and sheet materials for high temperature aircraft structural applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

A, Munitz, and National Institute of Standards and Technology (U.S.), eds. Cold compaction of ball-milled nanograin iron alloys. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.