Статті в журналах: "Portable tools"

1

Alfaro, Luis, and Ma José Roca. "Portable telepathology: methods and tools." Diagnostic Pathology 3, Suppl 1 (2008): S19. http://dx.doi.org/10.1186/1746-1596-3-s1-s19.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Roberts, Eric. "Tools for creating portable demonstration programs." ACM SIGCSE Bulletin 28, SI (June 2, 1996): 78–80. http://dx.doi.org/10.1145/237477.237539.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Roberts, Eric. "Tools for creating portable demonstration programs." ACM SIGCUE Outlook 24, no. 1-3 (January 1996): 78–80. http://dx.doi.org/10.1145/1013718.237539.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Kumar, Swarn P., and Ivor R. Philips. "Portable tools for Fortran parallel programming." Concurrency: Practice and Experience 3, no. 6 (December 1991): 559–72. http://dx.doi.org/10.1002/cpe.4330030606.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Nowak, Monika, and Agnieszka Terelak-Tymczyna. "Assessment of the safety of use of portable machine tools." Scientific Journal of the Military University of Land Forces 189, no. 3 (September 30, 2018): 192–205. http://dx.doi.org/10.5604/01.3001.0012.6237.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The article presents safety issues related to on-site machining with the use of portable machine tools. Their advantage is the possibility of machining elements at places in which they are used. This especially refers to large-size constructions, welded elements and any items whose disassembly is technically difficult. The authors present tasks performed by the operators of portable machining equipment, working conditions, construction and characteristic features of portable machine tools on the example of a portable boring machine, milling machine and flange facing machine. The presented characteristics can influence the safety of work with these machines. The information given in the article were used to asses risk at the position of a portable machine tool operator. The assessment was conducted using the Risk Score method taking into account four stages of using portable machine tools, i.e. transport, assembly/disassembly, machining and maintenance. The result of the conducted risk analysis is the proposal of possible risk reducing actions. Due to the specificity of the operation of portable machine tools which significantly impedes the development of a machine tool which would be safe in and of itself, the proposed actions refer mainly to organisational solutions. The work presents also the thesis that it is possible to decrease the risk at this position thanks to the use of numerical control in a portable machine tool. Such a solution may reduce exposure to some identified threats. The issue is presented on the example of a prototype of a portable flange facing machine developed in the Institute of Mechanical Technology ZUT in Szczecin.

6

Wijayanti, Ni Putu Nita, Deny Pradana Saputro, Oca Fernandes AF, and Raja Febri. "Ladder drill portable: Agility tools for sports." Journal Sport Area 6, no. 1 (March 25, 2021): 123–35. http://dx.doi.org/10.25299/sportarea.2021.vol6(2).5912.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The development of portable ladder drills as a medium for agility training has never been touched once. The ladder drill tool's mobile concept will make it easier for the trainer to use the device with a variety of varied agility training movements and can be used in more sports. Based on this, the research was carried out in an effort to make portable ladder drill training media that is useful as a medium for agility training. This research uses research and development level 3 methods. Product trials are conducted in three types: one on one practices with four respondents, small group trials worked with five respondents athletes, students majoring in Sports Education FKIP Riau University, and large-scale tests. They worked on 11 athletes KONI and Dispora Riau Province. The data analysis technique used in this research is the quantitative descriptive analysis technique. Furthermore, data collection techniques using a questionnaire (questionnaire). The results of this study indicate that: assessments made by material experts, media experts, one-on-one trials, small-scale trials, and large-scale trials are above 83 percent. Based on this study's results, it can be concluded that the Development of Portable Ladder Drills is declared feasible as a medium to increase agility by sports actors. Considering that this development still has shortcomings, future research recommendations are related to providing cheaper and more functional product materials in terms of equipment installation efficiency.

7

Barton, John, Susan Moisio, and David Abadie. "Data Analysis Tools for Portable Flow Monitoring." Proceedings of the Water Environment Federation 2003, no. 3 (January 1, 2003): 850–89. http://dx.doi.org/10.2175/193864703784830135.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Harrison, Robert J. "Portable tools and applications for parallel computers." International Journal of Quantum Chemistry 40, no. 6 (December 1991): 847–63. http://dx.doi.org/10.1002/qua.560400612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Wadsworth, Chris. "Editorial: Portable software tools for parallel architectures." Concurrency: Practice and Experience 11, no. 11 (September 1999): 587–91. http://dx.doi.org/10.1002/(sici)1096-9128(199909)11:11<587::aid-cpe445>3.0.co;2-d.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Matveev, V. I. "MOBILE HARDNESS MEASURING TOOLS: STATE AND PROSPECTS." Kontrol'. Diagnostika, no. 291 (September 2022): 52–57. http://dx.doi.org/10.14489/td.2022.09.pp.052-057.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The article briefly describes the main methods of hardness measurement in non-stationary field conditions. Among them are dynamic and ultrasonic methods, which made it possible to create portable devices of wide application. The features and advantages of modern mobile means of measuring the hardness of materials of numerous technological structures are described. The information about the main manufacturers of portable hardness testers and metrological means of their calibration and verification is given.

11

Jacky, Jonathan, Ira Kalet, Jun Chen, James Coggins, Steve Cousins, Robert Drzymala, William Harms, et al. "Portable software tools for 3d radiation therapy planning." International Journal of Radiation Oncology*Biology*Physics 30, no. 4 (November 1994): 921–28. http://dx.doi.org/10.1016/0360-3016(94)90368-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Phillips, Peter. "PETE: A Portable Environment for Educational Software Tools." Educational and Training Technology International 28, no. 1 (February 1991): 23–29. http://dx.doi.org/10.1080/0954730910280104.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Peeling, NE, and DP Youll. "Past and future trends for portable tools interfaces." Information and Software Technology 31, no. 4 (May 1989): 175–80. http://dx.doi.org/10.1016/0950-5849(89)90035-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Gligor, Anamaria, Alina-Sabina Ţepeç-Bobescu, and Mariana Arghir. "Vibrating Portable Machine-Tools Acting on Human Operator." PAMM 12, no. 1 (December 2012): 115–16. http://dx.doi.org/10.1002/pamm.201210048.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Colwell, John M., Javaid H. Khan, Geoffrey Will, Kathryn E. Fairfull-Smith, Steven E. Bottle, Graeme A. George, and Antony Trueman. "Prognostic Tools for Lifetime Prediction of Aircraft Coatings: Paint Degradation." Advanced Materials Research 138 (October 2010): 137–49. http://dx.doi.org/10.4028/www.scientific.net/amr.138.137.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

A direct interrogation, portable analysis technique (portable FT-IR) and a novel environment-monitoring profluorescent sensor for studying aircraft coating degradation have been developed. For the direct interrogation approach, a standard military aircraft paint: 459-line Anzothane flexible polyurethane (lead free) has been used to illustrate a new potential field technique to evaluate coating service lifetime, portable FT-IR. This technique allows direct analysis of chemical changes within the degrading coatings and has the potential to evaluate service lifetime when coupled with advanced statistical analysis methods (chemometrics). The degradation environment monitoring sensors are embodied in a profluorescent environment-sensitive witness patch that may be analysed in-service by a field-deployable fluorescence spectrometer. Accelerated ageing for both the paint and the witness patches has been undertaken and their capabilities as aircraft paint degradation monitors assessed.

16

Siahaan, Binsar, Addien Khalifah Ahmad, and Suyatmo Suyatmo. "Portable Trolley Box Design As Practice Support At Aviation Polytechnic Surabaya." Proceeding of International Conference of Advance Transportation, Engineering, and Applied Social Science 2, no. 1 (November 9, 2023): 106–10. http://dx.doi.org/10.46491/icateas.v2i1.1632.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Every time we visit a shop in the hangar we will find many tools, because tools are tools for cadets and instructors to do maintenance or repairing in the hangar. Trolley is a common tool to make it easier for humans to carry, move, lift something. Trolley is also a dead tool and not machined, then the trolley is run manually by being pushed, it can be seen in all types of trolley that has a handle as a handle to push. And there has not been found a portable trolley box in the hangar to facilitate cadets when carrying out practice or maintenance. To achieve this goal, it is necessary to design and build a portable trolley box that will be used by cadets when carrying out maintenance or repairing in shop or in hangar. This article discusses how to design and build a portable trolley box tool designed by the author himself. By using the help of additional applications such as solidwork, the author can make this design. The results showed that the portable trolley box design has the ability to carry and store tools and components needed for maintenance with a larger size and also more. The conclusion from the research results of this portable trolley box design is that it can facilitate cadets in maintenance or aircraft maintenance.

17

Tan, Poh, Razan A. Basonbul, Joanne Lim, and Naiem Moiemen. "Performance of portable objective wound assessment tools: a systematic review." Journal of Wound Care 32, no. 2 (February 2, 2023): 74–82. http://dx.doi.org/10.12968/jowc.2023.32.2.74.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Objective: Accurate wound assessment is crucial for determining the progression of healing and guides treatment strategies. Portable wound assessment devices can be useful in providing an accurate evaluation in the community where most cases are treated. The objective of this review was to compare the performance of various portable wound assessment techniques used for wound healing assessment described in the literature. Method: In April 2020, electronic databases were searched, using appropriate search terms, for all available publications on the use of portable wound assessment devices on human and artificial wounds. The primary outcome was the reliability and reproducibility of measurement while the secondary outcome was the feasibility of the instrument. All studies underwent quality assessment of diagnostic accuracy studies (QUADAS) to examine the quality of data. Results: A total of 129 articles were identified and 24 were included in the final review; 17 articles discussed two-dimensional (2D) devices; three articles discussed three-dimensional (3D) devices; and four articles discussed application-based devices. Most studies (n=8) reported on a 2D device that had an ICC of 0.92–0.99 for area measurement and a coefficient of variance of 3.1% with an error of 2.3% in human wounds and 1.55-3.7% in artificial wounds. The inter/intra observer reliability was 0.998 and 0.985, respectively with a scan time of two minutes per wound. The median QUADAS score was 12. Conclusion: Based on the presented evidence, 2D-based portable wound assessment devices were the most studied and demonstrated good performance. Further studies are required for 3D and application-based measurement instruments.

18

KOHL, MARTIN. "Tiny Lasers: Diode Lasers for Portable Miniaturized Diagnostic Tools." Journal of Clinical Laser Medicine & Surgery 13, no. 2 (April 1995): 111–12. http://dx.doi.org/10.1089/clm.1995.13.111.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Weisbuch, C., M. Rattier, L. Martinelli, H. Choumane, J. C. Avarre, Y. Marcy, G. Cerovic, M. L. Miramon, G. O. Reymond, and H. Benisty. "Towards portable, real-time, integrated fluorescence microarray diagnostics tools." IRBM 28, no. 5-6 (November 2007): 216–23. http://dx.doi.org/10.1016/j.rbmret.2007.11.015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Suruda, A., and L. Smith. "Work-related electrocutions involving portable power tools and appliances." Journal of Safety Research 24, no. 2 (June 1993): 125. http://dx.doi.org/10.1016/0022-4375(93)90013-d.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Holleman, Wesley, Eric Whinnem, and Madeleine Wrede. "Smart Portable Tools: The Practical Solution to Agile Assembly." SAE International Journal of Aerospace 6, no. 1 (September 17, 2013): 180–87. http://dx.doi.org/10.4271/2013-01-2295.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Zulhendri, Zulhendri, Yuliarman Yuliarman, Aidil Zamri, Asmed Asmed, and Nota Effiandi. "Rancang Bangun Alat Tekuk Pembuat Begel Portabel Dan Perbandingan Kecepatan Produksinya Dengan Alat Tradisionil." Jurnal Teknik Mesin 16, no. 1 (June 1, 2023): 37–42. http://dx.doi.org/10.30630/jtm.16.1.1080.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Begel or sekang is a longitudinal reinforcing ring to hold the shear stress that occurs in a concrete column or pillar, the putel is placed so that each longitudinal reinforcement is held so as not to bend out. So far, begel are made by sticking a shaft iron into a wood and then begel the iron manually, until it is obtained as needed. Traditional bending tools like this are inefficient because they require more energy to bend them and cannot be carried. Therefore it was designed and made PORTABLE BEGEL MAKING BENDING TOOLS. To test the speed of this tool compared with traditional bending tools. From the results of statistical tests it was concluded that the portable buckle making buckle tool is faster than the traditional buckling tool. This portable buckling device is designed more simply so that it can be carried anywhere and is easily made by construction workers.

23

Pan, Zheng. "Research on the Design and Improvement of a Kind of Modular Multi-Functional High-Power Portable Fan." Theoretical and Natural Science 5, no. 1 (May 25, 2023): 324–29. http://dx.doi.org/10.54254/2753-8818/5/20230571.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

To solve the problems of not being easy to bring the traditional fan and the weak wind, the single function of the portable, and other limitations, this paper studies the improvement of a kind of multifunctional portable fan. The multifunctional portable fan achieves its purpose of portability. It must have a small size and battery. A modular design is adopted in this paper to solve these problems. After designing the plan. This paper tested the shell's various functions, which were created using 3D printing technology. The test results show that the design can effectively play to the versatility of the fan. A modular design will enable tools to be extensible. It reduces the cost of using tools and the waste of resources.

24

Beduk, Tutku, Duygu Beduk, Mohd Rahil Hasan, Emine Guler Celik, Jurgen Kosel, Jagriti Narang, Khaled Nabil Salama, and Suna Timur. "Smartphone-Based Multiplexed Biosensing Tools for Health Monitoring." Biosensors 12, no. 8 (July 29, 2022): 583. http://dx.doi.org/10.3390/bios12080583.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Many emerging technologies have the potential to improve health care by providing more personalized approaches or early diagnostic methods. In this review, we cover smartphone-based multiplexed sensors as affordable and portable sensing platforms for point-of-care devices. Multiplexing has been gaining attention recently for clinical diagnosis considering certain diseases require analysis of complex biological networks instead of single-marker analysis. Smartphones offer tremendous possibilities for on-site detection analysis due to their portability, high accessibility, fast sample processing, and robust imaging capabilities. Straightforward digital analysis and convenient user interfaces support networked health care systems and individualized health monitoring. Detailed biomarker profiling provides fast and accurate analysis for disease diagnosis for limited sample volume collection. Here, multiplexed smartphone-based assays with optical and electrochemical components are covered. Possible wireless or wired communication actuators and portable and wearable sensing integration for various sensing applications are discussed. The crucial features and the weaknesses of these devices are critically evaluated.

25

Jersey, Sarah R., and Lulu Edwards. "Stiffness-Based Assessment of Pavement Foundation Materials Using Portable Tools." Transportation Research Record: Journal of the Transportation Research Board 2116, no. 1 (January 2009): 26–34. http://dx.doi.org/10.3141/2116-04.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

McKenna, Leanda, Leon Straker, and Anne Smith. "The inter-tester reliability of anthropometric measurement with portable tools." European Journal of Physiotherapy 15, no. 1 (February 22, 2013): 34–41. http://dx.doi.org/10.3109/14038196.2012.752522.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Valentini. "Smart Electrochemical Portable Tools for Cultural Heritage Analysis: A Review." Sensors 19, no. 19 (October 4, 2019): 4303. http://dx.doi.org/10.3390/s19194303.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

. Protecting Cultural Heritage (CH) from corrosion and other environmental damages, mainly involving metallic or organic layers contained in artwork, represents a major challenge for conservation scientists. Electrochemical techniques provide useful information about the deterioration effects of metallic coatings and organic layers. Recently, Electrochemical Impedance Spectroscopy (EIS) has been successfully applied in the study of metallic corrosion. However, EIS has not succeeded in becoming a routine technique, due to problems regarding both instrumental apparatus (which is not ideal for in situ analysis, especially with previous cell configurations), and the difficulty with data processing. At the same time, new portable electrochemical sensors, immunosensors, and biosensors have successfully made a scientific impact, mainly with in situ diagnosis of organic components contained in CH objects. For this purpose, this review presents two sections: the first describes the analytical optimization of impedance electrochemical cell geometries that are suitable for in situ metal-coating investigation; the second reports on the assembly of small electrochemical sensors, immunosensors, and biosensors, which useful for in situ organic layer characterization. This overview summarizes the state of the art regarding the application of electrochemical techniques and small electrochemical devices as alternative tools for the understanding of CH.

28

Goh, Felicia, Annemaree Carroll, and Robyn M. Gillies. "A review of the use of portable technologies as observational aids in the classroom." Information and Learning Sciences 120, no. 3/4 (March 11, 2019): 228–41. http://dx.doi.org/10.1108/ils-08-2018-0080.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Purpose Current classroom observation strategies include questionnaires, interviews, tests, self-report metrics and live or video review observation. However, these traditional methods are subject to biases from observers in determining behavior nuances, as well as being difficult to analyze for rapid and practical feedback. In addition, the invasiveness of extra body equipment in the classroom may alter the dynamic between students and teachers. The emergence of portable devices into mainstream usage has opened a pathway for a relatively novel source of quantitative data, free from observer bias and often with accompanying analytical tools for convenience. The purpose of this study is to summarize current uses of portable technology and explore how such devices could be used as monitoring tools by both schools and education researchers. Design/methodology/approach Functions based on utility outside the education field are proposed for monitoring student activity, posture and movement, as well as proximity and relationships to others and their environment. Deterrents to device implementation in regular classroom use, such as the importance of considering ethical issues and hardware limitations, are also covered. Findings While current portable technology is unlikely to replace more commonly used techniques of observing classes, they have the capacity to augment qualitative strategies, particularly in the area of real-time data output. Research limitations/implications Ideally, the lack of unbiased observational tools available and increased adoption of portable devices in classrooms could prompt future advances in technology for teaching and learning environments. Originality/value This review summarizes potential uses for portable technology in classroom observation strategies undertaken by researchers and teachers to improve learning and teaching practices.

29

Yakovenko, Ihor, Oleksandr Permyakov, Yevheniia Basova, Alexey Kotliar, and Oleksii Rudenko. "ENSURING OF ACCURACY DURING PROCESSING OF HEAVY MACHINERY OBJECTS WITH PORTABLE MACHINES." Bulletin of the National Technical University «KhPI» Series: Engineering and CAD, no. 1 (June 7, 2023): 160–66. http://dx.doi.org/10.20998/2079-0775.2023.1.15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The main layout features of portable machines with stationary machines of various groups are analyzed. The prospects and market trends for the growth in this class's equipment use in solving the problems of repair and modernization of various objects of heavy and power engineering, as well as in conventional engineering production, have been established. The main reasons that affect the accuracy of surface shaping during processing by portable machines are established, both from the side of the layout structure of the equipment and from the technological parameters of the shaping process. The issues of the relationship of layout solutions with basing a portable machine on the processing object and the kinematic scheme of shaping are considered. Based on this relationship, the factors affecting the accuracy of shaping were established and analyzed, which formed the basis of the proposed method for controlling accuracy at the early stages of creating portable machines, namely through the use of an aggregate-modular principle of equipment layout at the design stage of portable machines. This approach emphasizes the compliance of the proposed methodology with three modern concepts for the development of industrial production, namely, the widespread use of mechatronic systems, product lifecycle management through CALS technologies, and an integrated approach to creating technological systems through information technologies that form the basis of Industry 4.0. Based on the conducted research, a method for designing portable machine tools is proposed that provides control over the accuracy of processing, the layout of which is based on the aggregate-modular principle using the certification of technological modules. Keywords: mechanical processing, portable machine tools, layout, aggregate-modular principle, design, accuracy

30

Komoto, Hitoshi, and Nozomu Mishima. "A Simulation System to Analyze Effects of Relocation of Machine Tools on Supply Chain Robustness." International Journal of Automation Technology 6, no. 3 (May 5, 2012): 304–11. http://dx.doi.org/10.20965/ijat.2012.p0304.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Supply chains of modern complex systems need to keep up with the globalization of module and component suppliers to cope with resource restrictions, economic disparities, and rigorous environmental legislations. Robustness against variations in manufacturing tasks under undesirable situations is a crucial capability of global supply chains. Flexible and portable facilities can be shared among suppliers to increase supply chain robustness. This study proposes a system for modeling and simulating a supply chain in which portable machine tools are shared among the suppliers and relocated in order to adapt to machine tool breakdowns and manufacturing volume excesses. The system supports complex decision making in terms of the logistics of these machine tools with a view to decreasing the average completion time of manufacturing tasks without adding machine tools into the supply chain as a whole.

31

Putra, Ranggi Efnal, Armila Armila, and Rudi Kurniawan Arief. "PERANCANGAN TUNGKU RE-HEATING PORTABLE." Rang Teknik Journal 6, no. 2 (May 18, 2023): 225–30. http://dx.doi.org/10.31869/rtj.v6i2.4206.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Re-heating furnace is a furnace that is used as a metal heater in the forging process. Re-heating furnace is one of the needs of the material technology laboratory to carry out the practical process of metal forming with plastic deformation as a heating medium for the forging process. The manufacture of this re-heating furnace is to make tools using medium carbon metal with a target temperature of 800℃. The process of making the furnace uses K300 type concrete material, 8mm reinforcing steel so that the furnace can be strong and durable. The furnace manufacture has succeeded in reaching a temperature of 302.8°C in 10 seconds using an air velocity of 15.4 km/h, and reaching a temperature of 931.8°C in 100 seconds using an air velocity of 25.7 km/h. This Re-heating Furnace can heat low-high carbon steel for forging process.

32

Hamid, Mariska. "EVALUASI APAR DAN HIDRAN SEBAGAI UPAYA PENANGGULANGAN KEBAKARAN DI PT X." Medical Technology and Public Health Journal 3, no. 2 (September 25, 2019): 176–82. http://dx.doi.org/10.33086/mtphj.v3i2.667.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Portable Fire extinguishers and hydrant are tools used for overcoming the fire. The purpose of this research is to learn about fire portable and hydrant application as a defensive action of fire in PT X. This research is a descriptive research with a cross sectional approach. Variable of this research are portable fire extingusher, hydrant and company policy. The result of this research showed that almost installation of portable fire estingusher is comply with Permenakertans No. 04/PER/MEN/1980 abaout the requirments of portable fire estingusher, either the hydrant also comply with Kepmen PU No. 02/KPTS/1985 about regulation of preventive and defensive action of fire for bulding , but there is one hydrant which covered by the rest of production materials and there is no white writting or mark “HYDRANT” on some box hydrant. Company is suggested to look at, or aware of the height of portable fire estingusher installation and box hydrant may not covered by anything and give an white writting or mark “HYDRANT’.

33

Matthew, Nicholaus, Agustina Christiani, and Christopher Nata. "RANCANG BANGUN ALAT UKUR ANTROPOMETRI DIGITAL DAN PORTABEL [DESIGN AND CONSTRUCTION OF DIGITAL AND PORTABLE ANTHROPOMETRIC MEASUREMENT TOOLS]." FaST - Jurnal Sains dan Teknologi (Journal of Science and Technology) 7, no. 2 (November 30, 2023): 98. http://dx.doi.org/10.19166/jstfast.v7i2.7569.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In the Work System Design Laboratory at UPH, there are anthropometric measuring tools for standing position and sitting position. Based on the tools evaluation, it was found that they were less efficient because of the need for repeated tool adjustments. Furthermore, two observers were needed to collect anthropometric data and they had to read the scale manually. Therefore, a new digital and portable anthropometric measuring tool was developed to overcome the problem. The Gea HT721 measuring instrument was chosen as an alternative to a new anthropometric measuring tool that uses ultrasonic ranging technology to measure distances. A supporting tool (similar to a caliper) was also developed to support the anthropometric measurement process. An evaluation of the new anthropometric measuring tool was carried out by calculating the average percent error and a comparison of the total time for data collection. The results of the average percent measurement error was 0.58%. According to the paired t-test, there was no significant difference in the average of measured body dimensions using the new and the previous tools. The new anthropometric tools can reduce data collection time by 32% for standing positions and 11% for sitting positions.Bahasa Indonesia Abstract:Pada Laboratorium Analisis Perancangan Kerja (APK) di UPH terdapat alat ukur antropometri posisi berdiri dan posisi duduk. Berdasarkan evaluasi alat antropometri tersebut, ditemukan bahwa alat kurang efisien karena membutuhkan penyetelan alat yang berulang yang juga membutuhkan lebih dari satu pengamat saat pengambilan data. Selain itu, pengamat sering mengalami kesulitan pembacaan hasil pengukuran manual pada meteran. Oleh karena itu, dibuat alat antropometri jenis baru yang bersifat digital dan portabel. Alat ukur Gea HT721 dipilih sebagai alternatif alat antropometri baru yang menggunakan teknologi ultrasonic ranging untuk mengukur jarak. Setelah itu, dirancang dan dibuat suatu alat pendukung yang menyerupai jangka sorong untuk mendukung proses pengukuran data antropometri. Evaluasi alat antropometri baru dilakukan dengan menghitung rata – rata persen error, serta perbandingan total waktu pengambilan data. Hasil rata – rata persen error pengukuran adalah 0,58%. Hasil uji paired t test menunjukkan bahwa tidak terdapat perbedaan signifikan antara rata-rata hasil pengukuran dimensi tubuh menggunakan alat ukur antropometri jenis baru dengan hasil pengukuran menggunakan alat yang lama. Berdasarkan perbandingan total waktu pengambilan data terdapat penurunan waktu sebesar 32% untuk data antropometri posisi berdiri dan 11% untuk data antropometri posisi duduk.

34

Woo, Seong-Tak, Cheol-Woo Park, Ji-Hyun Sung, and Cheol-Min Park. "Implementation of Portable Automatic Tourniquet with High-Elasticity Biocompatible Strap." Applied Sciences 11, no. 10 (May 19, 2021): 4653. http://dx.doi.org/10.3390/app11104653.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The most common screening techniques to diagnose a patient’s illness are blood collection and intravenous procedures. To find a collection or injection site, conventional blood collection support tools, such as latex tubing and buckle-type tourniquets, are generally used to compress the patient’s blood vessels. This conventional passive method has significant problems such as latex allergy, vulnerability to site contamination and potential bloodstream infection, and physical damage due to improper use. To overcome the disadvantages of conventional blood collection support tools, an automatic tourniquet with a high-elasticity biocompatible strap was constructed. The automatic tourniquet is designed to automatically adjust the strap length using a motor to control the pressure according to the body dimensions of patients. In order to evaluate the performance of the automatic tourniquet, blood flow characteristics were analyzed using an ultrasound measurement system. The results demonstrated that the automatic tourniquet showed better performance compared with those of other blood collection support tools.

35

Ferretti, Marco. "The investigation of ancient metal artefacts by portable X-ray fluorescence devices." J. Anal. At. Spectrom. 29, no. 10 (2014): 1753–66. http://dx.doi.org/10.1039/c4ja00107a.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Yudha, F., E. Ramadhani, and R. M. Komaryan. "A Prototype of Portable Digital Forensics Imaging Tools using Raspberry Device." IOP Conference Series: Materials Science and Engineering 1077, no. 1 (February 1, 2021): 012064. http://dx.doi.org/10.1088/1757-899x/1077/1/012064.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Goncharov, Mikhail S., Andrei V. Khurtasenko, and Ivan V. Shrubchenko. "FEATURES OF FORMING AT SHROUD RESTORATIVE MACHINING BY PORTABLE MACHINE TOOLS." Proceedings of Irkutsk State Technical University 21, no. 7 (July 2017): 10–25. http://dx.doi.org/10.21285/1814-3520-2017-7-10-25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Grant, Andrew, and Robert Dickens. "An implementation of a portable instrumented communication library using CS tools." Future Generation Computer Systems 9, no. 1 (May 1993): 53–61. http://dx.doi.org/10.1016/0167-739x(93)90026-l.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Herrera Díaz, Luz Edith, María de los Milagros Cruz Ramos, and Mario Alberto Sandoval Sánchez. "Using Personal Portable Devices as Learning Tools in the English Class." HOW 21, no. 2 (October 2014): 74–93. http://dx.doi.org/10.19183/how.21.2.5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Łachacz, Tomasz. "Project Faster — Tools For First Responders." Internal Security 13, no. 2 (December 29, 2021): 25–26. http://dx.doi.org/10.5604/01.3001.0015.6556.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This paper presents tools and technologies for first responders (FRs) carrying out tasks at crisis scenes. These technologies are being developed in the framework of the European scientific research project FASTER. There are innovative tools that can help rescuers respond quickly and effectively to save human life and health. This work concerns improving and extending communication and situational awareness for rescuers, smart textiles, autonomous or remotely controlled vehicles. The main point is to integrate the tools into a system coordinated using a mobile operation command centre that will provide a portable common operational picture (PCOP). For the project, the key is to increase the safety of first responders, not just the efficiency of their operations.

41

Van Tien, Nguyen, Nguyen Trong Nghia, Nghiem Thi Ha Lien, Vu Duong, Do Quang Hoa, Duong Chi Dung, Phan Nguyen Nhue, and Nguyen Minh Hue. "Improvement of SERS signal measured by portable Raman instrument using random sampling technique." Vietnam Journal of Science and Technology 60, no. 2 (March 23, 2022): 237–44. http://dx.doi.org/10.15625/2525-2518/16384.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In recent years, portable Raman spectrometers and commercialized surface-enhanced Raman scattering (SERS) substrates have become increasingly popular. They have turned out to be great tools for both substance detection, identification, and analysis on-site. This work addresses the technique to collect proper Raman spectra using SERS substrates and portable Raman spectrometers. We propose a random sampling technique that gives representative and high-quality spectra with high intensity and good resolution. This technique was tested on a home-built portable Raman spectrometer and SERS substrates based on metal film over nano-sphere (MFON) structure. Experimental results showed that peaks of Raman spectrum collected using random sampling technique are significantly narrower than those of spectra measured in conventional one and prevent samples and SERS substrates from photoinduced degradation. Potentially, this method can promote quantitative SERS and chemical trace analysis using portable Raman spectrometers.

42

Eastwood, P. G., N. A. Halliwell, and P. Gilbert. "Laser Tools for Diesel Engine Diagnosis." Proceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering 199, no. 4 (October 1985): 295–300. http://dx.doi.org/10.1243/pime_proc_1985_199_169_01.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Two portable laser instruments are described which allow the engineer to simply ‘stand and point’ laser beams at a target surface in order to obtain a measurement of time-resolved vibration velocity. The first supplements the accelerometer and measures normal surface velocity but offers the advantage of non-contact measurement. Its use is demonstrated in detecting reduced nozzle pressures in fuel injectors. The second instrument is a laser torsional vibrometer which measures torsional oscillations of rotating machinery parts and in particular crankshaft oscillation. Comparisons are made with the more standard technique which utilizes a slotted disc. The new instrument provides advantages of non-contact measurement, insensitivity to shaft radial motion and the ability to measure oscillations of shafts of arbitrary cross-section.

43

Bahn, Paul G. "Palaeolithic weaving — a contribution from Chauvet." Antiquity 75, no. 288 (June 2001): 271–72. http://dx.doi.org/10.1017/s0003598x00060890.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The author draws attention to Gustave Chauvet's belief, 90 years ago, in Magdalenian weaving on the basis of ethnography, interpretation of Palaeolithic tools and motifs in portable art of the period.

44

Kim, Eunyoung. "Review of portable rod-shaped stones in the Neolithic period." KOREA NEOLITHIC RESEARCH SOCIETY 45 (June 30, 2023): 59–85. http://dx.doi.org/10.35186/jkns.2023.45.59.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This study aims to examine the characteristics of the archaeological contexts and change of portable rod-shaped stone artifacts from the Neolithic period in the central and southern regions of Korean peninsula and to review the possibility that they functioned as ritual tools. Reflecting the characteristics of stone tools that do not change rapidly or diversely, I classified them into two major categories: stones corresponding to the wide-mouthed pottery group and stones corresponding to the round-bottomed pottery group. I examined their shapes and excavation contexts and attempted to reveal their changes. Portable rod-shaped stones corresponding to the wide-mouthed pottery group are characterized by a planar shape surface that is rod-shaped and a cross-section shape that is round or rectangular. They are often found in mountainous sites, tombs, and shell mounds. Portable stones corresponding to the round-bottomed pottery group show an increase in quantity compared to stones corresponding to the wide-mouthed pottery group, and a change in which flat stones with rectangular cross-sections appear. There is also a change in which the proportion of stones excavated from residential sites increases. This reflects the major trends of social change in the Korean Neolithic period, and it can also be seen that the direction of change is closer to that of Bronze Age stones. On the other hand, by focusing on stones excavated from tombs and mountainous sites, I clarified through analysis of corresponding axes that these stones were attributed to the wide-mouthed pottery period. I also suggested that rod-shaped stones and stone axes may have been a set of ritual tools. Although limited to the wide-mouthed pottery group, it is significant that I were able to restore one aspect of ritual behavior in the Korean Neolithic period through portable rod-shaped stones.

45

Chagdes, James R., Joshua J. Liddy, Amanda J. Arnold, Laura J. Claxton, and Jeffrey M. Haddad. "A Mathematical Model to Examine Issues Associated With Using Portable Force-Measurement Technologies to Collect Infant Postural Data." Journal of Motor Learning and Development 8, no. 1 (April 1, 2020): 14–37. http://dx.doi.org/10.1123/jmld.2019-0009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Portable force-measurement technologies are becoming increasingly popular tools to examine the maturation of postural motor milestones, such as sitting and standing, in infants. These convenient, low-cost devices provide numerous opportunities to characterize postural development outside of the laboratory. However, it is important to understand the unique challenges and technical limitations associated with collecting center of pressure (CoP) data using portable force-measurement technologies in infant populations. This study uses a mathematical model to examine issues that emerge when using portable force-measurement technologies to collect sitting and standing postural data in infants. The results of our mathematical simulations demonstrate that the CoP errors from portable force-measurement technologies depend on the posture examined (e.g., sitting vs. standing), the anthropometrics of the person (e.g., height and weight), the frequency of body sway, and the experimental setup (e.g., an additional support surface being placed on top of the device). Recommendations are provided for developmental researchers interested in adopting these technologies in infant populations.

46

Yulastri, Yulastri, Era Madona, Anggara Nasution, and M. Irmansyah. "The Elderly Alzheimer Patient’s Portable Tools for Position Detection with SMS Notifications." Indonesian Journal of Electronics, Electromedical Engineering, and Medical Informatics 3, no. 4 (November 6, 2021): 156–63. http://dx.doi.org/10.35882/ijeeemi.v3i4.5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In this study we propose a portable tool to monitor and monitor patients at risk of Alzheimer's. The aim of this research was design and make a useful tool to determine the position and condition of Alzheimer's sufferers. The research stages consisted of designing hardware, software and testing the whole tool. The patient's condition find out by an accelerometer sensor was used which read the values of the x, y, and z axes to determine the condition of patient normal or falling. This tool also have a panic button which use by the patient if he did not know his position and forget the way to go home and SMS notification will be sent to the colleague when this button was pressed. The results of the test show the device can send an SMS notification of the patient's position when the supervisor sends a sms "GPS ON” and the navigation module can determine the location of the position. The distance between reading position of the GPS module to the test point in average was 2.39 meters. Generally speaking, the tool can working properly.

47

de Lima, B. S. L. P., B. P. Jacob, N. F. F. Ebecken, and A. C. Benjamin. "Portable FORTRAN programming tools in the development of a structural analysis program." Computers & Structures 57, no. 6 (December 1995): 1109–25. http://dx.doi.org/10.1016/0045-7949(95)00091-t.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

McHenry, Megan S., Lydia J. Fischer, Yeona Chun, and Rachel C. Vreeman. "A systematic review of portable electronic technology for health education in resource-limited settings." Global Health Promotion 26, no. 2 (August 23, 2017): 70–81. http://dx.doi.org/10.1177/1757975917715035.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Objective: The objective of this study is to conduct a systematic review of the literature of how portable electronic technologies with offline functionality are perceived and used to provide health education in resource-limited settings. Methods: Three reviewers evaluated articles and performed a bibliography search to identify studies describing health education delivered by portable electronic device with offline functionality in low- or middle-income countries. Data extracted included: study population; study design and type of analysis; type of technology used; method of use; setting of technology use; impact on caregivers, patients, or overall health outcomes; and reported limitations. Results: Searches yielded 5514 unique titles. Out of 75 critically reviewed full-text articles, 10 met inclusion criteria. Study locations included Botswana, Peru, Kenya, Thailand, Nigeria, India, Ghana, and Tanzania. Topics addressed included: development of healthcare worker training modules, clinical decision support tools, patient education tools, perceptions and usability of portable electronic technology, and comparisons of technologies and/or mobile applications. Studies primarily looked at the assessment of developed educational modules on trainee health knowledge, perceptions and usability of technology, and comparisons of technologies. Overall, studies reported positive results for portable electronic device-based health education, frequently reporting increased provider/patient knowledge, improved patient outcomes in both quality of care and management, increased provider comfort level with technology, and an environment characterized by increased levels of technology-based, informal learning situations. Negative assessments included high investment costs, lack of technical support, and fear of device theft. Conclusions: While the research is limited, portable electronic educational resources present promising avenues to increase access to effective health education in resource-limited settings, contingent on the development of culturally adapted and functional materials to be used on such devices.

49

Hou, Ken An, Li Xin Yang, Lin Fan, He Ping Ding, and Dan Yu. "The Application of Multi-Functional Portable Field Electric Check Terminal." Applied Mechanics and Materials 716-717 (December 2014): 1367–70. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.1367.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

This thesis introduces some disadvantages of the electricity inspection tools at present, and proposes some new solutions and an electricity inspection tool in view of the above shortcomings and the insufficiency. The name of this electricity inspection tool is Multi-functional portable field electric check terminal. This electricity inspection terminal has many advantages and makes up for the insufficiency, solves some electricity inspection problems at present. The paper introduces in detail the hardware composition of Multi-functional portable field electric check terminal and working principle and working process.

50

Yusfiandayani, Roza, Mulyono S. Baskoro, William Sutioso, and Ibrahim Kholilullah. "Fishing trials of portable fad on purse seine fisheries." IOP Conference Series: Earth and Environmental Science 1033, no. 1 (June 1, 2022): 012020. http://dx.doi.org/10.1088/1755-1315/1033/1/012020.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Abstract Fish Aggregating Devices (FADs) are tools for collecting fish by using various attractors from solid objects that attract fish to gather. Portable FAD uses sound frequency attractors that can be operated in various fishing areas. Portable FAD is not placed permanently in the waters and can be stored until fishing operations are carried out. The purpose of this activity is to calculate the buoyancy and gravity of portable FAD, determine the composition of the catch, and determine the distribution pattern of fish in the morning, afternoon, and evening. For 17 (seventeen) days, this activity was carried out in Yamdena waters, Ambon. The calculation results of the total buoyancy force of portable FAD were 20554.69 gs, total sinking force was 5460.69 gs, and the extra buoyancy value was 73%. The dominant fish caught using purse seiner were skipjack tuna (Katsuwonus pelamis) of 37.41%, yellowfin tuna (Thunnus albacares) of 33.53%, scad fish (Decapterus russeli) of 11.62%, tuna (Euthynnus affinis) by 8.12%, and sunglir fish (Elagatis bipinnulata) by 5.14%. Portable FAD can attract fish from 15 minutes and continue to increase to a peak at 105 minutes with 160 fish approaching. The highest fish approach to portable FAD was recorded in the morning at 105 minutes at a depth of 20-25 m were 89 fish, the lowest was in the afternoon at 15 minutes at a depth of 5-10 m were 7 fish. The best use of portable FAD is in the morning and evening.

Статті в журналах з теми "Portable tools"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями