Добірка наукової літератури з теми "Porous fibres"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Porous fibres".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Porous fibres"
Bora, Pritom J., Khadija K. Khanum, Riya K. Ramesh, K. J. Vinoy, and Praveen C. Ramamurthy. "Porous fibres of a polymer blend for broadband microwave absorption." Materials Advances 2, no. 11 (2021): 3613–19. http://dx.doi.org/10.1039/d1ma00114k.
Повний текст джерелаShen, Wen, Guanghua Zhang, Xuemei Ge, Yali Li, and Guodong Fan. "Effect on electrospun fibres by synthesis of high branching polylactic acid." Royal Society Open Science 5, no. 9 (September 2018): 180134. http://dx.doi.org/10.1098/rsos.180134.
Повний текст джерелаPrintsypar, G., M. Bruna, and I. M. Griffiths. "The influence of porous-medium microstructure on filtration." Journal of Fluid Mechanics 861 (December 27, 2018): 484–516. http://dx.doi.org/10.1017/jfm.2018.875.
Повний текст джерелаRoberts, Aled D., Jet-Sing M. Lee, Adrián Magaz, Martin W. Smith, Michael Dennis, Nigel S. Scrutton, and Jonny J. Blaker. "Hierarchically Porous Silk/Activated-Carbon Composite Fibres for Adsorption and Repellence of Volatile Organic Compounds." Molecules 25, no. 5 (March 7, 2020): 1207. http://dx.doi.org/10.3390/molecules25051207.
Повний текст джерелаMatharu, Rupy Kaur, Harshit Porwal, Lena Ciric, and Mohan Edirisinghe. "The effect of graphene–poly(methyl methacrylate) fibres on microbial growth." Interface Focus 8, no. 3 (April 20, 2018): 20170058. http://dx.doi.org/10.1098/rsfs.2017.0058.
Повний текст джерелаAhmed, Jubair, Tanveer A. Tabish, Shaowei Zhang, and Mohan Edirisinghe. "Porous Graphene Composite Polymer Fibres." Polymers 13, no. 1 (December 27, 2020): 76. http://dx.doi.org/10.3390/polym13010076.
Повний текст джерелаMu, Hai Bo, Gui Zeng Hao, Xiao Wei Li, and Bo Meng. "Preparation and Properties of Asymmetric Porous Aluminium-Oxide Ceramic Hollow Fibre Membranes." Key Engineering Materials 537 (January 2013): 87–91. http://dx.doi.org/10.4028/www.scientific.net/kem.537.87.
Повний текст джерелаTsarouchas, Dimitris. "Qualitative and Quantitative Architecture Characterisation of Porous Materials." Key Engineering Materials 495 (November 2011): 134–37. http://dx.doi.org/10.4028/www.scientific.net/kem.495.134.
Повний текст джерелаSchiek, Richard L., and Eric S. G. Shaqfeh. "A nonlocal theory for stress in bound, Brownian suspensions of slender, rigid fibres." Journal of Fluid Mechanics 296 (August 10, 1995): 271–324. http://dx.doi.org/10.1017/s0022112095002138.
Повний текст джерелаKuranska, Maria, and Aleksander Prociak. "Porous polyurethane composites with natural fibres." Composites Science and Technology 72, no. 2 (January 2012): 299–304. http://dx.doi.org/10.1016/j.compscitech.2011.11.016.
Повний текст джерелаДисертації з теми "Porous fibres"
Lozano, Flavien. "Elaboration de matelas à base de fibres de verre par voie humide." Thesis, Université Grenoble Alpes (ComUE), 2019. http://www.theses.fr/2019GREAI001.
Повний текст джерелаGlass fibre - based mats produced by a wetlaid process have industrial applications as a battery separator and insulation materials (core of vacuum insulation panels). These materials are mainly made with sub-micron fibres which relatively expensive and can present a risk to health. This project is a contribution to the production of glass fibre-based mats by a wet-laid process to add value to coarser fibres, the final product should respect precise specifications. We have been led to study the behavior of glass fibers in different stages of the process and to characterize the resulting mats. We investigated especially the physico-chemical behavior of aqueous suspensions of glass fiber. We have characterized structure properties, the mechanical resistance to traction, the compressibility and the thermal conductivity of fibrous mats. The experimental work has allowed us to give a formulation of the optimized composition and operational conditions of the process so that the final mattress conforms to the specifications. This new composition includes reinforcement fibres in small quantities. It allows improving the mechanical characteristics without affecting the other properties. Finally, we quantified the production costs and compared them to those of the process currently used with coarse fiber (dry-laid production).Keywords: Paper engineering, physical chemistry, porous media, glass fibre, characterization
Forsström, Jennie. "Fundamental Aspects on the Re-use of Wood Based Fibres : Porous Structure of Fibres and Ink Detachment." Doctoral thesis, KTH, Fibre and Polymer Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-84.
Повний текст джерелаIn this work, different aspects on the re-use of wood based fibres have been studied, focusing on ink detachment of flexographic ink from model cellulose surfaces and changes in porous structure of kraft fibres following different treatments. New model systems for evaluation of ink detachment and ink-cellulose interactions were used. Ink detachment was studied using Impinging jet cell equipment, taking into consideration the influence of storage conditions, surface roughness and surface energy of the cellulose substrate. A micro adhesion measurement apparatus (MAMA) was used to directly study ink-cellulose interactions, from which the adhesive properties between ink and cellulose, having various surface energies, could be derived. UV-light, elevated temperatures, longer storage time, decreased surface energy, i.e. making the cellulose surface more hydrophobic, and high surface roughness all negatively affected ink detachment. Attenuated total reflectance - fourier transform infra red (ATR-FTIR) and atomic force microscopy (AFM) was used to evaluate structural and chemical changes of ink and cellulose upon storage at elevated temperature or under UV-light. After storage at elevated temperatures, ATR-FTIR spectra indicated that a hydrolysis or an oxidative reaction took place as a peak at 1710 cm-1 appeared. AFM revealed that storage at elevated temperatures caused the latex particles present in the ink to form a film, most likely due to annealing. Less ink detached from hydrophobic cellulose surfaces. Ink detachment decreased for rougher cellulose substrates due to an increased molecular contact area.
Fibre pore structure and water retaining ability influenced fibre/fibre joint strength and different paper strength properties. Investigations took into account the effect of pulp yield, counter-ion types, pH, salt, hornification and strength enhancing additives. Nuclear magnetic resonance relaxation (NMR), inverse size exclusion chromatography (ISEC) and water retention value (WRV) measured the changes that occur in the fibre wall upon varying the conditions. Each different measuring technique contained unique information such that a combination of the techniques was necessary to give as complete a picture as possible over the changes that occurred in the fibre wall upon varying the conditions for the fibre. A correlation between fibre pore radius and sheet strength properties was found, suggesting that fibres with larger pores allow for a larger molecular contact area between fibres to be formed during drying and consolidation of the paper. Fibre/fibre joint strength, fibre flexibility, and the number of efficient fibre/fibre contacts also controlled sheet strength. The effect of different strength enhancing additives on fibre pore structure and paper strength was investigated. Larger pores in the fibres allowed for additives to penetrate into the fibre wall. Additives with low molecular mass (Mw) penetrated into the fibre wall to a larger extent than additives with a high Mw, causing an embrittlement of the fibre. However, low Mw additives gave higher sheet tensile strength despite a leveling out in strength at high additions, indicating that the fibre wall can only adsorb a limited amount of chemical. Polyallylamine hydrochloride (PAH) and polyelectrolyte complexes (PEC) of PAH and polyacrylic acid (PAA) were added separately to the pulp. PEC significantly improved both tensile strength and Z-strength, whereas PAH alone did not increase the strength properties to the same extent unless the sheets were heated to 150°C for 10 minutes. The results suggested that the effect of PEC was dominated by an improvement in fibre/fibre joint strength, whereas the effect of PAH was significantly affected by an improvement of the intra-fibre bond strength
Forsström, Jennie. "Fundamental aspects on the re-use of wood based fibres : porous structure of fibres and ink detachment /." Stockholm, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-84.
Повний текст джерелаKatsogiannis, Konstantinos A. G. "Single step production of nanoporous electrospun poly(ε-caprolactone) fibres". Thesis, Loughborough University, 2016. https://dspace.lboro.ac.uk/2134/22929.
Повний текст джерелаCollignon, Brice. "Séchage des bétons réfractaires : expérimentation, modélisation et influence d'un ajout de fibres polymère." Thesis, Vandoeuvre-les-Nancy, INPL, 2009. http://www.theses.fr/2009INPL051N/document.
Повний текст джерелаCastable refractories take a more and more important place in various industries: cement factory, casting, iron and steel making. They consist mainly of aggregates of high-alumina and ultra-low cement. Their permeability is very low and they contain before the first heat-up a residual water content of 4 to 6 % (dry basis). Drying during the first heat-up is a crucial step which sharply influence the refractory in-service performances. On one hand, damaging can occur, and as a consequence will reduce drastically the life time of the plants. On the other hand, particular drying conditions can lead to an explosive spalling of the refractory corresponding to an internal gas pressure steep raise linked to the water saturated vapour pressure raise with temperature. First, a complete thermomechanical characterization between ambient temperature and 500 °C of the unshaped refractory materials has been conducted. Then the mechanisms involved during their drying, on one hand, by an experiment and, on the other hand, by using a simultaneous heat and mass transfer model in porous media have been studied. And last, the impact of adding polymer fibers has been analysed both on the concrete permeability as well as their influence on drying
Loffler, Steven Marc. "Dyeing of cellulose fibres : a case study in structure-transport relationships in heterogeneous porous media." Thesis, University of Cambridge, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.627033.
Повний текст джерелаShukla, Sushumna. "Membrane distillation with porous metal hollow fibers for the concentration of thermo-sensitive solutions." Thesis, Montpellier 2, 2014. http://www.theses.fr/2014MON20215/document.
Повний текст джерелаThis thesis presents an original approach for the concentration of thermo-sensitive solutions: the Sweep Gas Membrane Distillation (SGMD) process. A new membrane contactor with metallic hollow fibers has been designed and allows the distillation process to be operational at low temperature. Heat is generated in the fibers by the Joule effect, rather than being supplied as latent heat in the liquid bulk. The localized generation of heat results in a reduction of temperature polarization phenomena. The stainless-steel hollow fiber membranes have been synthetized with appropriate structural properties and sufficient mechanical strength. The pore surface of the fibers has been made hydrophobic by the deposition of a thin layer of an elastomer. Moreover, a novel and green method is presented to fabricate alumina and stainless-steel hollow fibers. This method is based on ionic gelation of a biopolymer and completely avoids the use of harmful solvents. By a detailed experimental study of the SGMD the influence of different operational parameters on the process performance has been investigated. The improvements in the flux and the separation efficiency using Joule effect have been successfully demonstrated, even in the case of pervaporation
Salinas-Torres, David. "Tailoring of carbon materials for their use as electrodes in electrochemical capacitors." Doctoral thesis, Universidad de Alicante, 2014. http://hdl.handle.net/10045/45286.
Повний текст джерелаBiasi, Valentin. "Modélisation thermique de la dégradation d’un matériau composite soumis au feu." Thesis, Toulouse, ISAE, 2014. http://www.theses.fr/2014ESAE0034/document.
Повний текст джерелаComposite materials are increasingly used in new generation aircraft structures. Mass and as a consequence fuel savingsencourage aircraft manufacturers to use them optimally. However, these materials can degrade quickly when exposed tosignificant heat fluxes, resulting in a loss of mechanical strength. This problem can be dramatic for passenger safety asmechanical resistance of such innovative structures can not be ensured in case of fire events. Current certification methodsof fire resistance of aeronautical composite materials are mainly based on experiments, that are only representative of thespecific conditions under which they were carried out. The understanding of thermal, chemical and mechanical phenomenaoccurring during the decomposition of these materials, with the support of numerical simulations and experiments, can helpimproving existing methods and optimizing the future aeronautical structures from the design chain. This study deals withthe development and validation of a multi-components and multi-dimensional thermo-chemical model of decomposing compositematerials. It can deal with complex degradations following several decomposition reactions as well as transport ofpyrolysis gases from their formation up to their ejection out of the material. The use of advanced homogenization laws isproposed to account for the chemical transformations on heat and mass transfers occurring in the material. The applicationof the thermo-chemical model to a laser degradation study under known but non-uniform heat flux in a controlled environmentallows to confront the simulation results with experimental measurements and thus validate the multi-componentsapproach. Finally, the numerical analysis of a decomposing composite material submitted to a flame highlights the effectof emitted decomposition gases on the exchanged parietal heat flux
Novotná, Aneta. "Možnosti využití rozptýlené výztuže pro lehké konstrukční betony." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226093.
Повний текст джерелаКниги з теми "Porous fibres"
Yang, Yiqi, Jianyong Yu, Helan Xu, and Baozhong Sun, eds. Porous lightweight composites reinforced with fibrous structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-53804-3.
Повний текст джерелаNew materials permeable to water vapor. Berlin: Springer, 1999.
Знайти повний текст джерелаYang, Yiqi, Jianyong Yu, Helan Xu, and Baozhong Sun. Porous lightweight composites reinforced with fibrous structures. Springer, 2017.
Знайти повний текст джерелаYang, Yiqi, Jianyong Yu, Helan Xu, and Baozhong Sun. Porous Lightweight Composites Reinforced with Fibrous Structures. Springer, 2017.
Знайти повний текст джерелаYang, Yiqi, Jianyong Yu, Helan Xu, and Baozhong Sun. Porous lightweight composites reinforced with fibrous structures. Springer, 2018.
Знайти повний текст джерелаChesneau, Christian Pierre. Low Reynolds number flow through fibrous porous media. 1985.
Знайти повний текст джерелаZhong, Wen Hua. Creeping flow through a model of fibrous porous media. 2005.
Знайти повний текст джерелаZhong, Wen Hua. Creeping flow through a model of fibrous porous media. 2005.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. A porous ceramic interphase for SiC/Si₃N₄ composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаBocquet, Lydéric, David Quéré, Thomas A. Witten, and Leticia F. Cugliandolo, eds. Soft Interfaces. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198789352.001.0001.
Повний текст джерелаЧастини книг з теми "Porous fibres"
Marcian, V. "MORPHOLOGY OP POROUS POLYPROPYLENE FIBRES." In Morphology of Polymers, edited by Blahoslav Sedláček, 573–84. Berlin, Boston: De Gruyter, 1986. http://dx.doi.org/10.1515/9783110858150-055.
Повний текст джерелаFederico, Salvatore. "Porous Materials with Statistically Oriented Reinforcing Fibres." In Nonlinear Mechanics of Soft Fibrous Materials, 49–120. Vienna: Springer Vienna, 2015. http://dx.doi.org/10.1007/978-3-7091-1838-2_2.
Повний текст джерелаWoldekidan, Milliyon Fekade, Jan Voskuilen, Dave Vliet, and Greet A. Leegwater. "Research into Applications of Acrylic Fibres in Porous Asphalt: Laboratory, Numerical and Field Study." In RILEM Bookseries, 395–406. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-6878-9_29.
Повний текст джерелаMichielsen, Bart. "Porous Stainless Steel Hollow Fibers." In Encyclopedia of Membranes, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1774-1.
Повний текст джерелаShirosaki, Yuki, Satoshi Hayakawa, Yuri Nakamura, Hiroki Yoshihara, Akiyoshi Osaka, and Artemis Stamboulis. "Use of Inter-Fibril Spaces Among Electrospun Fibrils as Ion-Fixation and Nano-Crystallization." In Advances in Bioceramics and Porous Ceramics VII, 33–38. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119040392.ch4.
Повний текст джерелаWadley, H. N. G., and J. M. Kunze. "Consolidation of Metal Coated Fibers." In IUTAM Symposium on Mechanics of Granular and Porous Materials, 389–402. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5520-5_35.
Повний текст джерелаMierzwiczak, M., K. Mrozek, and P. Muszynski. "Heat transfer in fibrous porous media." In Insights and Innovations in Structural Engineering, Mechanics and Computation, 426–32. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, 2016. http://dx.doi.org/10.1201/9781315641645-71.
Повний текст джерелаSaruhan, Bilge. "5 Porous matrix composites." In Oxide-Based Fiber-Reinforced Ceramic-Matrix Composites, 155–90. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-0319-4_5.
Повний текст джерелаPedersen-Bjergaard, Stig, Knut Einar Rasmussen, and Jan Åke Jönsson. "Liquid-Phase Microextraction (LPME) Utilizing Porous Hollow Fibers." In Handbook of Sample Preparation, 125–48. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9780813823621.ch7.
Повний текст джерелаSamimi, Ehsan, Mohammad Mehdi Abolhasani, and Shahram Arbab. "Producing Porous Polyacrylonitrile Fibers Using Wet-Spinning Method for Making Carbon Fibers." In Eco-friendly and Smart Polymer Systems, 577–80. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45085-4_139.
Повний текст джерелаТези доповідей конференцій з теми "Porous fibres"
Federico, Salvatore, Alfio Grillo, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "Porous Materials Reinforced by Statistically Oriented Fibres." In ICNAAM 2010: International Conference of Numerical Analysis and Applied Mathematics 2010. AIP, 2010. http://dx.doi.org/10.1063/1.3498473.
Повний текст джерелаPasetto, M., and N. Baldo. "Mechanical and rheological characterisation of porous asphalt mixtures with added PAN fibres." In Proceedings of the Fourth European Symposium on Performance of Bituminous and Hydraulic Materials in Pavements, Bitmat 4. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, 2017. http://dx.doi.org/10.4324/9780203743928-34.
Повний текст джерелаSirleto, L., M. A. Ferrara, L. Moretti, I. Rendina, A. Rossi, E. Santamato, and B. Jalali. "Raman emission in porous silicon at 1.5 micron: a possible approach." In Proceedings of 2005 IEEE/LEOS Workshop on Fibres and Optical Passive Components, 2005. IEEE, 2005. http://dx.doi.org/10.1109/wfopc.2005.1462108.
Повний текст джерелаBurheim, Odne S., Jon G. Pharoah, Hannah Lampert, Preben J. S. Vie, and Signe Kjelstrup. "Through-Plane Thermal Conductivity of PEMFC Porous Transport Layers." In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33215.
Повний текст джерелаSilva, J. G. P., D. Hotza, R. Janssen, and H. A. Al-Qureshi. "Modelling of load transfer between porous matrix and short fibres in ceramic matrix composites." In MATERIALS CHARACTERISATION 2011. Southampton, UK: WIT Press, 2011. http://dx.doi.org/10.2495/mc110151.
Повний текст джерелаTaylor, Jess, Shervan Babamohammadi, Gera Troisi, and Salman Masoudi Soltani. "Chemical Activation of Recycled Carbon Fibres for Application as Porous Adsorbents in Aqueous Media." In 2022 IEEE 22nd International Conference on Nanotechnology (NANO). IEEE, 2022. http://dx.doi.org/10.1109/nano54668.2022.9928646.
Повний текст джерелаSobera, M. P., C. R. Kleijn, P. Brasser, and H. E. A. van den Akker. "Multiscale CFD of the Flow, Heat and Mass Transfer Through a Porous Material With Application to Protective Garments." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3106.
Повний текст джерелаChen, Yijun, Jizhe Cai, James G. Boyd, and Mohammad Naraghi. "Processing-Mechanical Property Relationship of Hollow and Porous Carbon Fibers Fabricated by Coaxial Electrospinning." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6598.
Повний текст джерелаTamayol, A., and M. Bahrami. "Analytical Determination of Viscous Permeability of Fibrous Porous Media." In ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/fedsm2008-55071.
Повний текст джерелаRizvi, Hussain R., and Nandika D'Souza. "Design of a Multifunctional Porous Coaxial Electrospun Mesh Using Polycaprolactone (PCL) and Poly Butylene Adipate-CO-Terephthalate (PBAT)." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67534.
Повний текст джерелаЗвіти організацій з теми "Porous fibres"
Fuller, E. L. Jr. Characterization of porous carbon fibers and related materials. Office of Scientific and Technical Information (OSTI), July 1996. http://dx.doi.org/10.2172/273794.
Повний текст джерелаFuller, Jr, E. L. Characterization of Porous Carbon Fibers and Related Materials. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/814269.
Повний текст джерелаBurchell, T. D., J. W. Klett, and C. E. Weaver. A novel carbon fiber based porous carbon monolith. Office of Scientific and Technical Information (OSTI), June 1995. http://dx.doi.org/10.2172/115403.
Повний текст джерелаPapathanasiou, Thanasis D. Fluid Flow and Infiltration in Structured Fibrous Porous Media. Office of Scientific and Technical Information (OSTI), August 2006. http://dx.doi.org/10.2172/899242.
Повний текст джерелаKandil, Sherif M. Nano-Engineered Porous Hollow Fiber Membrane-Based AC System. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1155013.
Повний текст джерелаNielsen, J. M., G. F. Pinder, T. J. Kulp, and S. M. Angel. Investigation of dispersion in porous media using fiber-optic technology. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10191395.
Повний текст джерелаNielsen, J. M., G. F. Pinder, T. J. Kulp, and S. M. Angel. Investigation of dispersion in porous media using fiber-optic technology. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/7016099.
Повний текст джерелаLara-Curzio, E. Optimization of Pseudo-Porous SiC Fiber Coatings for SiC/SiC Composites. Office of Scientific and Technical Information (OSTI), January 2001. http://dx.doi.org/10.2172/777618.
Повний текст джерелаSPIRE CORP BEDFORD MA. Rare Earth-Doped Porous Si Infrared LEDs for High-Speed Fiber-Optic Communications. Fort Belvoir, VA: Defense Technical Information Center, February 1998. http://dx.doi.org/10.21236/ada338825.
Повний текст джерела