Добірка наукової літератури з теми "Polypropylene fibrous"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polypropylene fibrous".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Polypropylene fibrous"
Zhang, Hao Hua, Ji Ru Zhang, and Jie Xiong. "Research on the Stressed Performance of Polypropylene Fibrous Concrete Ditch." Advanced Materials Research 255-260 (May 2011): 3082–86. http://dx.doi.org/10.4028/www.scientific.net/amr.255-260.3082.
Повний текст джерелаBordunov, Sergey, Olga Galtseva, and Inna Plotnikova. "Obtaining Biologically Active Polypropylene Fibrous Materials." Materials Science Forum 992 (May 2020): 764–69. http://dx.doi.org/10.4028/www.scientific.net/msf.992.764.
Повний текст джерелаWang, Ying Hao, and Xu Dong Liu. "Application and Analysis on Polypropylene Fibrous Concrete." Advanced Materials Research 250-253 (May 2011): 682–85. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.682.
Повний текст джерелаNovoselova, L. Yu, and E. E. Sirotkina. "Fibrous Polypropylene–Polystyrene Materials Produced Using Ultrasound." International Polymer Science and Technology 34, no. 9 (September 2007): 33–39. http://dx.doi.org/10.1177/0307174x0703400905.
Повний текст джерелаSharova, T. B., L. A. Obvintseva, N. V. Kozlova, I. P. Sukhareva, M. P. Dmitrieva, A. D. Shepelev, A. K. Avetisov, A. I. Khorokhorin, and A. S. Smolyanskii. "Ozone Resistance of Nonwoven Polypropylene Fibrous Material." Fibre Chemistry 48, no. 5 (January 2017): 410–15. http://dx.doi.org/10.1007/s10692-017-9807-9.
Повний текст джерелаXu, Jinhao, Binjie Xin, and Xuanxuan Du. "Controllable Wetting Modification of Polypropylene Fibrous Mats." AATCC Journal of Research 8, no. 2_suppl (December 2021): 19–22. http://dx.doi.org/10.14504/ajr.8.s2.4.
Повний текст джерелаChang, Jing Cai, Ai Ping Tao, Ming Feng Gao, Chun Yan Xu, and Chun Yuan Ma. "Collection of Submicron Particles by Polyethylene Composite Materials Collector." Advanced Materials Research 919-921 (April 2014): 2030–36. http://dx.doi.org/10.4028/www.scientific.net/amr.919-921.2030.
Повний текст джерелаShi, Zhen Wu, Shuang Liu, and Rui Rui Zhang. "Comparative Experiment on Frost Resistance of Different Kinds of Polymer Fibrous Concrete." Advanced Materials Research 250-253 (May 2011): 673–77. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.673.
Повний текст джерелаProrokova, N. P., S. Yu Vavilova, V. M. Buznik, and A. E. Zavadskii. "Modification of polypropylene fibrous materials with ultradispersed polytetrafluoroethylene." Polymer Science Series A 55, no. 11 (November 2013): 643–51. http://dx.doi.org/10.1134/s0965545x13110047.
Повний текст джерелаAbd Rahman, Norashidah, Siti Amirah Azra Khairuddin, Norwati Jamaluddin, and Zainorizuan Mohd Jaini. "Strength of Reinforced Fibrous Foamed Concrete-Filled Hollow Section." Materials Science Forum 936 (October 2018): 219–23. http://dx.doi.org/10.4028/www.scientific.net/msf.936.219.
Повний текст джерелаДисертації з теми "Polypropylene fibrous"
Biyana, Nobuhle Yvonne. "Studies on flax/polypropylene-reinforced composites for automotive applications." Thesis, Nelson Mandela Metropolitan University, 2015. http://hdl.handle.net/10948/d1021150.
Повний текст джерелаJia, Jun. "Melt spinning of continuous filaments by cold air attenuation." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37276.
Повний текст джерелаKalyankar, Rahul R. "Natural fiber reinforced structural insulated panels for panelized construction." Birmingham, Ala. : University of Alabama at Birmingham, 2009. https://www.mhsl.uab.edu/dt/2010r/kalyankar.pdf.
Повний текст джерелаSlánská, Petra. "Aplikace termochromních látek v polymerních materiálech." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216383.
Повний текст джерелаBadji, Célia. "Vieillissement de matériaux composites renforcés de fibres naturelles : étude de l’impact sur les propriétés d’aspect et sur les émissions dans l’air intérieur." Thesis, Pau, 2017. http://www.theses.fr/2017PAUU3022/document.
Повний текст джерелаBiocomposites are fiber-reinforced materials from renewable resources. These materials are an alternative to fiberglass or carbon reinforced composites. Indeed, their lightweight and interesting mechanical properties give them a growing interest in sectors such as building (decking, garden furniture) or automobile (door panels, dashboards). However, humidity, temperature and UV radiation are parameters that can compromise the physicochemical stability of biocomposites.The main objective of this thesis is to assess the biocomposites durability in their main conditions of use. For this purpose, these materials have been exposed for one year outdoors (deck boards) and under windshield glass (dashboards). The results showed that the mechanical performance of biocomposites was affected and greatly influenced by the type of exposure. On the other hand, the differences in color and crystallinity variations that differ between the two exposures suggest different degradation mechanisms that are very dependent on the conditions of use.Since biocomposites can be used in environments such as the passenger cabin, they can also be sources of pollutants in indoor air. The study of emissions of volatile organic compounds (VOCs) by biocomposites during their ageing under windshield glass allowed generating data necessary for the evaluation of the impact on the car indoor air quality of these new materials. However, the drastic increase of VOCs surface concentration during exposure suggests that weathering strongly affected biocomposites due to the sensitivity of the structural components of plant fibers to exposure conditions.Understanding of the degradation mechanisms can be carried out through the interpretation of the causal links between mechanical and microstructural properties, VOC emissions and visual appearance. Statistical treatment by Principal Component Analysis (PCA) revealed the links and relationships existing between the quantitative parameters.Natural weathering often requires long time of exposure for an efficient perception of the materials degradation. Thus, accelerated ageing in laboratory is more and more carried out in industry for time saving. In order to verify the representativeness of the degradation mechanisms occurring during exterior weathering by weathering chambers, a comparative study between the exterior aging and the artificial aging was carried out
Pliya, Bidossessi amen prosper. "Contribution des fibres de polypropylène et métalliques à l'amélioration du comportement du béton soumis à une température élevée." Thesis, Cergy-Pontoise, 2010. http://www.theses.fr/2010CERG0479/document.
Повний текст джерелаThe aim of this study was to investigate the effect of polypropylene and steel fibres on the behaviour of concrete subjected to high temperature. Polypropylene fibres were added to the studied concrete mixes in order to improve the concrete thermal stability. Steel fibres were added to the studied concrete mixes in order to improve the concrete residual mechanical properties. News concretes mixes were then designed by adding a cocktail of polypropylene fibres and steel fibres in order to improve both the thermal stability and the residual mechanical properties of the studied concrete. Four groups of concrete mixes were studied: - concretes without fibres, - concretes with polypropylene fibres, - concretes with steel fibres, and - concretes with a cocktail of polypropylene and steel fibres. Three water/cement ratios were used: 0.30, 0.45 and 0.61. The concrete specimens were subjected to various heating – cooling cycles from the room temperature to 150°C, 300°C, 450°C and 600 °C. The heating rate was fixed at 1 °C.min-1. The amounts of fibres in the concrete were 0.11%, 0.17% or 0.22% in volume for polypropylene fibres and 0.25%, 0.38% or 0.51% in volume for steel fibres. The amounts of fibres in concrete with a cocktail of polypropylene and steel fibres were 0.49, 0.60, 0.62 and 0.73%, in volume. The thermal stability, the initial and residual mechanical properties (compressive strength, tensile strength, modulus of elasticity), the porosity and the mass loss of the studied concrete mixes were investigated.This experimental study shows a way to design a concrete mix in order to improve both the thermal stability and the residual mechanical properties
Haczycki, S. J. "The behaviour of polypropylene fibres in aggressive environments." Thesis, University of Bradford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.236516.
Повний текст джерелаSoccalingame, Lata. "Étude des scénarios de fin de vie des biocomposites : vieillissement et retransformation de biocomposites PP/farine de bois et PLA/fibres de lin." Thesis, Montpellier 2, 2014. http://www.theses.fr/2014MON20082/document.
Повний текст джерелаNowadays, biocomposite materials are booming and will be a growing end-of-life issue for the future. They are based on a thermoplastic matrix (oil-based or bio-based) reinforced with vegetable fillers or fibers. Consequently, the study of their end of life through recycling, composting and incineration is a scientific and technologic challenge.The first goal of this thesis is to study the reprocessing end of life (successive injection and grinding cycles) of polypropylene (PP) based biocomposites filled with wood flour. The impact of the wood particle size and a coupling agent was assessed. Thus, a very good mechanical stability was observed up to 7 reprocessing cycles despite some degradation from the material components. Then, the reprocessing after artificial or natural UV weathering was carried out. The major trend is a “regeneration” phenomenon of mechanical properties after reprocessing in spite of strong degradations after UV weathering. Moreover, the addition of wood filler tends to restrain the PP photochemical degradation.The second goal is to study the end of life of polylactic acid (PLA) based biocomposites reinforced with flax fibers. The impact of the composition, the processing technic and humidity weathering on the reprocessing was assessed. Similar “regeneration” phenomena were observed leading to conclude to the beneficial effect of reprocessing. Then composting and biodegradation aspects were investigated. Heat release rate measurements enabled to estimate the incineration potential which could be linked to the PLA degradation rate
Espert, Ana. "Natural fibres/polypropylene composites from residual and recycled materials." Licentiate thesis, KTH, Fibre and Polymer Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1667.
Повний текст джерелаNatural fibres fulfil all the requirements in order toreplace inorganic fillers in thermoplastic composites. Naturalfibres are inexpensive, renewable, biodegradable, present lowerdensity and their mechanical properties can be compared tothose of inorganic fillers. However, several disadvantagesappear when natural fibres are used for composites. First ofall, the poor compatibility between the hydrophilic fibres withthe hydrophobic thermoplastic matrix leads to a weak interface,which results in poor mechanical properties. On the other hand,the hydrophilic nature of the fibres makes them very sensitivetowards water absorption, which leads also to the loss ofproperties and the swelling and dimensional instability.
In order to enhance the compatibility fibre-matrix, thefibres were chemically surface modified by five differentmethods: a) graft copolymerisation withpolypropylene-graftedmaleic anhydride copolymer (PPgMA), b)modification by PPgMA during processing, c) modification byorganosilanes, d) acetylation, e) modification with peroxideoligomers. Modified fibres led to improved mechanicalproperties and thermal behaviour when used in composites withpost-industrial polypropylene (PP) containing ethylene vinylacetate copolymer (EVA). Modification with peroxide oligomersshowed very promising results, but modification with PPgMA waschosen for further preparation of composites due to itssimplicity.
Two sets of composites were prepared using two differentpolypropylene types as matrix: virgin polypropylene (PP) andthe above mentioned post-industrial polypropylene (PP/EVA).Four different types of cellulosic fibres were used as fillers:cellulose fibres from pulping, sisal fibres, coir fibres andLuffa sponge fibres. The mechanical properties of thecomposites were dependent mostly on the fibre loading andslightly on the type of fibre. The fibers changed thecharacteristics of the material leading a higher stiffness buta lower toughness.
Water absorption of composites was studied at threedifferent temperatures: 23°C, 50°C and 70°C. Thewater absorption kinetics were studied and it was found thatwater is absorbed in composites following the kineticsdescribed by the Fickian diffusion theory. After absorption, animportant loss of properties was observed, due to thedestruction of the fibre structure due to the waterabsorbed.
Doan, Thi Thu Loan. "Investigation on jute fibres and their composites based on polypropylene and epoxy matrices." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2006. http://nbn-resolving.de/urn:nbn:de:swb:14-1149143661135-69962.
Повний текст джерелаUntersuchungen zum mechanischen und thermischen Verhalten sowie zur Benetzung von Jutefasern im Ausgangszustand, nach Entwachsen und nach Oberflächenmodifikation, mit dem Ziel einer Verwendung als Verstärkungsfasern in Verbundwerkstoffen. Untersuchungen zum mechanischen und thermischen Verhalten sowie zur hygrothermischen Alterung von Jute/Polypropylen (PP) Verbunden. Einfluss des PP-Typs, der Modifizierung der Matrix mit Maleinsäureanhydrid gepfropftem PP und des Faservolumengehalts.Untersuchung der Grenzschicht in Jute/Epoxidharz Verbunden in Hinblick auf die mechanischen Eigenschaften nach Alkalibehandlung und Oberflächenmodifikation der Jutefasern. Jutefasern haben gute spezifische mechanische Eigenschaften. Die Einzelfasereigenschaften unterliegen der bei Naturfasern üblichen Streuung der mechanischen Eigenschaften. Im Gegensatz zu konventionellen Verstärkungsfasern (Glas, Carbon) nimmt wachstumsbedingt mit zunehmendem Faserquerschnitt die Festigkeit tendenziell zu. Faseroberflächenbehandlungen verbessern die Benetzbarkeit, erhöhen die thermische Stabilität und reduzieren die Feuchteaufnahme sowie den Diffusionskoeffizient. Jute/Polypropylen-Verbunde Chemische und physikalische Wechselwirkungen zwischen Faser und MAHgPP nach optimierter Kopplerauswahl verbessern in Abhängigkeit vom PP-Typ die Grenzflächenscherfestigkeit und die mechanischen Eigenschaften. Durch Einbeziehen der Grenzflächeneigenschaften können mit einer modifizierten Mischungsregel die Zugfestigkeiten der Verbunde beschrieben werden. Jute/Epoxidharz-Verbunde Faseroberflächenbehandlungen mit Natronlauge, Organosilanen, Epoxiddispersionen und deren Kombinationen führen zu verbesserter Benetzung, reduzierter Wasseraufnahme und verbesserter Haftung sowie verbesserten mechanischen Eigenschaften in Jute/Epoxidharz-Verbunden
Книги з теми "Polypropylene fibrous"
Sarvaranta, Leena. Characterization methods for polypropylene fibre-reinforced cement mortar composites. Espoo, Finland: Technical Research Centre of Finland, 1993.
Знайти повний текст джерелаYin, Shi. Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1.
Повний текст джерелаUgbolue, S. C. O. Polyolefin fibres: Industrial and medical applications. Cambridge: Woodhead Publishing Ltd, 2009.
Знайти повний текст джерелаMoeiri-Farsi, M. H. Effects of autoclave temperatures on properties of cementitious based matrices reinforced with randomly orientated polypropylene fibres. Salford: University of Salford, 1993.
Знайти повний текст джерелаYin, Shi. Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete. Springer, 2018.
Знайти повний текст джерелаYin, Shi. Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete. Springer, 2017.
Знайти повний текст джерелаNational Register of Foreign Collaborations (India) and India. Dept. of Scientific & Industrial Research., eds. Technology in Indian polypropylene fibre and filament yarn industry: A status report prepared under the National Register of Foreign Collaborations. New Delhi: Govt. of India, Dept. of Scientific & Industrial Research, Ministry of Science & Technology, 1990.
Знайти повний текст джерелаUgbolue, S. C. O. Polyolefin Fibres: Industrial and Medical Applications. Elsevier Science & Technology, 2009.
Знайти повний текст джерелаUgbolue, S. C. O. Polyolefin Fibres: Structure, Properties and Industrial Applications. Elsevier Science & Technology, 2017.
Знайти повний текст джерелаUgbolue, S. C. O. Polyolefin Fibres: Structure, Properties and Industrial Applications. Elsevier Science & Technology, 2017.
Знайти повний текст джерелаЧастини книг з теми "Polypropylene fibrous"
Atikler, Ulas, and Funda Tihminlioglu. "Influence of Surface Treatment of Fillers on Mechanical, Surface, and Water Sorption Behavior of Natural-Fiber-Reinforced Polypropylene Composites." In Spherical and Fibrous Filler Composites, 157–79. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2016. http://dx.doi.org/10.1002/9783527670222.ch6.
Повний текст джерелаSen, Kushal. "Polypropylene fibres." In Manufactured Fibre Technology, 457–79. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5854-1_16.
Повний текст джерелаMarcian, V. "MORPHOLOGY OP POROUS POLYPROPYLENE FIBRES." In Morphology of Polymers, edited by Blahoslav Sedláček, 573–84. Berlin, Boston: De Gruyter, 1986. http://dx.doi.org/10.1515/9783110858150-055.
Повний текст джерелаDave, Trudeep N., Dhavalkumar Patel, Gafur Saiyad, and Nirmal Patolia. "Use of Polypropylene Fibres for Cohesive Soil Stabilization." In Lecture Notes in Civil Engineering, 409–17. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0890-5_34.
Повний текст джерелаYin, Shi. "Introduction." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 1–7. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_1.
Повний текст джерелаYin, Shi. "Literature Review." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 9–50. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_2.
Повний текст джерелаYin, Shi. "Production and Characterisation of the Physical and Mechanical Properties of Recycled PP Fibers." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 51–68. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_3.
Повний текст джерелаYin, Shi. "Comparative Evaluation of 100% Recycled and Virgin PP Fibre Reinforced Concretes." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 69–89. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_4.
Повний текст джерелаYin, Shi. "Post-cracking Performance of Concrete Reinforced by Various Newly Developed Recycled PP Fibres." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 91–101. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_5.
Повний текст джерелаYin, Shi. "Environmental Benefits of Using Recycled PP Fibre Through a Life Cycle Assessment." In Development of Recycled Polypropylene Plastic Fibres to Reinforce Concrete, 103–22. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3719-1_6.
Повний текст джерелаТези доповідей конференцій з теми "Polypropylene fibrous"
Avdeeva, Katerina, Alena Shumskaya, Zhanna Ignatovich, Alexander Rogachev, Vladimir Agabekov, Maxim Yarmolenko, Aleksey Mikhalko, Nataliya Dudchik, and Aleksey Oleynik. "Modified Polypropylene Fibrous Nonwoven Materials." In 2021 IEEE 11th International Conference Nanomaterials: Applications & Properties (NAP). IEEE, 2021. http://dx.doi.org/10.1109/nap51885.2021.9568574.
Повний текст джерелаLeong, Yee-Tian, Meng-Hau Sung, and David Kuo. "Nutrient Removal Efficiency of a Fibrous Polypropylene Biofilm Reactor in Pilot Scale." In The 8th World Congress on Civil, Structural, and Environmental Engineering. Avestia Publishing, 2023. http://dx.doi.org/10.11159/iceptp23.144.
Повний текст джерелаDa Costa Santos, Ana Caroline, and Paul Archbold. "Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC." In 4th International Conference on Bio-Based Building Materials. Switzerland: Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.326.
Повний текст джерелаPavlin, Majda, Barbara Horvat, and Vilma Ducman. "Fibre Reinforced Alkali-Activated Rock Wool." In International Conference on Technologies & Business Models for Circular Economy. University of Maribor Press, 2022. http://dx.doi.org/10.18690/um.fkkt.2.2022.6.
Повний текст джерелаRosli, M. S., M. H. Othman, Sri Yulis M. Amin, O. Saliza Azlina, and M. A. Azis. "Rheological behaviour on Polypropylene-Nanoclay-Gigantochloa Scortechinii fibres." In PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON FRONTIER OF DIGITAL TECHNOLOGY TOWARDS A SUSTAINABLE SOCIETY. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0120879.
Повний текст джерелаAlexandrescu, Laurentia, Maria Sonmez, Mihai Georgescu, Anton Ficai, Roxana Trusca, and Ligian Tudoroiu. "Polypropylene/Polyamide/Carbon Fibres Nanocomposites: Processing – Morphology – Property Relationships." In The 4th World Congress on New Technologies. Avestia Publishing, 2018. http://dx.doi.org/10.11159/icnfa18.134.
Повний текст джерелаBendjillali, Khadra, Mourad Hadjoudja, and Mohamed Chemrouk. "Utilizing recycled polypropylene fibres as reinforcement for concrete beams." In The International Conference on Civil Infrastructure and Construction. Qatar University Press, 2020. http://dx.doi.org/10.29117/cic.2020.0108.
Повний текст джерелаRamkumar, S. "Shear Behaviour of Fiber Reinforced Concrete Beams Using Steel and Polypropylene Fiber." In Sustainable Materials and Smart Practices. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901953-21.
Повний текст джерелаKurup, G. Surya Narayana, Sona P. S., Luthfa U, Varsha Manu, and Amal Azad Sahib. "Undrained Strength Characteristics of Fibre Reinforced Expansive Soils." In International Web Conference in Civil Engineering for a Sustainable Planet. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.112.19.
Повний текст джерелаUsman, Fathoni, Syazwan Shaharuddin, Noor Mahmudah, and Monita Olivia. "Effect of Adding Polypropylene Fibres to Flexural Strength of Ferrocement." In Proceedings of the Third International Conference on Sustainable Innovation 2019 – Technology and Engineering (IcoSITE 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/icosite-19.2019.8.
Повний текст джерела