Добірка наукової літератури з теми "Polymer stretching during formation"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polymer stretching during formation".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Polymer stretching during formation"
Wang, Yu, Wenjie Sun, Song Liu, Huajian Ji, Xin Chen, Huihao Zhu, Haili Zhao, Yulu Ma, and Linsheng Xie. "The Formation of a Highly Oriented Structure and Improvement of Properties in PP/PA6 Polymer Blends during Extrusion-Stretching." Polymers 12, no. 4 (April 10, 2020): 878. http://dx.doi.org/10.3390/polym12040878.
Повний текст джерелаKomaladewi, Anak Agung Istri Agung Sri, Putu Teta Prihartini Aryanti, Graecia Lugito, I. Wayan Surata, and I. Gede Wenten. "Recent progress in microfiltration polypropylene membrane fabrication by stretching method." E3S Web of Conferences 67 (2018): 03018. http://dx.doi.org/10.1051/e3sconf/20186703018.
Повний текст джерелаKulichikhin, Valery, Ivan Skvortsov, Andrey Subbotin, Sergey Kotomin, and Alexander Malkin. "A Novel Technique for Fiber Formation: Mechanotropic Spinning—Principle and Realization." Polymers 10, no. 8 (August 2, 2018): 856. http://dx.doi.org/10.3390/polym10080856.
Повний текст джерелаChen, Liang Yu, Chung Cheng Su, and Ren Haw Chen. "Influences of Process Conditions on Stretching Characteristics of Crystalline Polymer Film." Advanced Materials Research 939 (May 2014): 342–48. http://dx.doi.org/10.4028/www.scientific.net/amr.939.342.
Повний текст джерелаDing, Lei, Daoxin Zhang, Tong Wu, Feng Yang, Fang Lan, Ya Cao та Ming Xiang. "Three-dimensional crystal structure evolution and micropore formation of β-iPP during biaxial stretching". Polymer 196 (травень 2020): 122471. http://dx.doi.org/10.1016/j.polymer.2020.122471.
Повний текст джерелаWu, Gao-Gao, Wen-Bo Chen, Chao Ding, Li-Yang Xu, Zheng-Ying Liu, Wei Yang та Ming-Bo Yang. "Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: In-situ SAXS and WAXD studies". Polymer 163 (лютий 2019): 86–95. http://dx.doi.org/10.1016/j.polymer.2018.12.051.
Повний текст джерелаCostine, Allan, Phillip Fawell, Andrew Chryss, Stuart Dahl, and John Bellwood. "Development of Test Procedures Based on Chaotic Advection for Assessing Polymer Performance in High-Solids Tailings Applications." Processes 8, no. 6 (June 24, 2020): 731. http://dx.doi.org/10.3390/pr8060731.
Повний текст джерелаJinnai, Hiroshi. "Electron microscopy for polymer structures." Microscopy 71, Supplement_1 (February 18, 2022): i148—i164. http://dx.doi.org/10.1093/jmicro/dfab057.
Повний текст джерелаMaksimova, O. G., A. V. Maksimov, V. V. Smirnov, V. I. Egorov, S. V. Osipov, and E. V. Menshikov. "Study of adsorption effect on orientational and relaxation properties of finite polymer chains near the solid surface." Journal of Physics: Conference Series 2103, no. 1 (November 1, 2021): 012236. http://dx.doi.org/10.1088/1742-6596/2103/1/012236.
Повний текст джерелаFortunato, Cavallini, De Bellis, Marra, Tamburrano, Sarto, and Sarto. "Phase Inversion in PVDF Films with Enhanced Piezoresponse Through Spin-Coating and Quenching." Polymers 11, no. 7 (June 28, 2019): 1096. http://dx.doi.org/10.3390/polym11071096.
Повний текст джерелаДисертації з теми "Polymer stretching during formation"
Mu, Shenglong. "A Real-time Study on Mechano-optical Properties of Chitosan during Film Formation and Processing." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1462885413.
Повний текст джерелаЯременко, Володимир Володимирович. "Формоутворюючий інструмент та технологія виготовлення корпусів із полімерних матеріалів". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/23138.
Повний текст джерелаAnalyzing modern methods of production of polymer housing parts under single and small batch production conditions, comparing their advantages and disadvantages, the vacuum thermoforming method of plastic was chosen as the manufacturing technology of the housing. This method of manufacturing has made it possible to significantly reduce the costs of designing and manufacturing a tool. In the thesis the ways of solving the problem of uneven distribution of the shell wall thickness are given, the process of drawing the work piece material in the process of thermoforming by its finite element modeling in the ANSYS PolyFlow environment is investigated. The construction of the forming tool is designed taking into account the forming the minimum permissible wall thickness of the housing part from the rigidity conditions that meet international standards established by modeling the test load by means of finite elements. The experimental verification of simulation results is carried out and it is established that in the estimation of the wall thickness distribution of a part, the simulation of the process can replace the experimental methods. As a result, reduce the cost and time costs when developing a new product and its enclosure.
Pasquali, Meghan. "Mechanism of Nanostructure Formation during Solution Template Wetting." Digital WPI, 2011. https://digitalcommons.wpi.edu/etd-theses/281.
Повний текст джерелаIvosevic, Milan Cairncross Richard A. Knight Richard. "Splat formation during thermal spraying of polymer particles : mathematical modeling and experimental analysis /." Philadelphia, Pa. : Drexel University, 2006. http://hdl.handle.net/1860/1121.
Повний текст джерелаVafadari, Abtin. "Study of Thermal Degradation for Solid Amines During CO2 Capture Cycling and Mechanism of Porous Polymer Formation." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1312926852.
Повний текст джерелаCococcetta, Nicholas Michael. "Investigating Surface Finish, Burr Formation and Tool Wear During Sustainable Machining of 3D Printed Carbon Fiber Reinforced Polymer (CFRP) Composites." Miami University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=miami1586533608277002.
Повний текст джерелаHuser, Julien. "FUI Ecoating. Comprehension of the Scale Formation Mechanism during the Suspension Polymerization of Vinyl Chloride Monomer and Development of a Durable Protective Polymer Coating." Thesis, Mulhouse, 2013. http://www.theses.fr/2013MULH4032.
Повний текст джерелаThe suspension synthesis of PolyVinyl Chloride (S-PVC) at the INEOS ChlorVinyls facility in Mazingarbe (FRANCE) is realized thanks to a closed-reactor technology with reactor walls made of stainless steel or enamel. One of the major problems during the production of PVC by suspension polymerization is the formation of a deposit (called crust or scale) on the reactor walls. The formation of scale leads to numerous sorts of drawbacks like a decrease of the reactors’ productivity, the need to clean the reactors after each batch, the exposure of the operators to VinylChloride Monomer (VCM) which is classified CMR, some quality issues… At the moment, a coating is applied before each batch (50 times per day for the 22 reactors at Mazingarbe) in order to lower the amount of scale formed during the S-PVC batch. The application of the coating added to the formation of scale leads to important extra costs. The comprehension of the scale formation mechanism with the aim of then developing a durable protective coating becomes a priority in order to increase the final product quality, lower the costs and gain a competitive advantage for INEOS ChlorVinyls. The Ph.D. subject was divided into two parts with the first year dedicated to the comprehension of the scale formation mechanism and the establishment of a complete scenario explaining the formation of scale from a chemical and physical point of view. The second part of this project was dedicated to the development of a polymer coating with the selection of an adapted polymer candidate and then the optimization of its adhesion onto stainless steel in order to obtain the optimal performances and the durability of the coating
Percha, Pamela Anne. "I, Crystallization and morphological studies of ICI's intermediate temperature semicrystalline (ITX) polymer and, II, The influence of deformation (shear strain) during bond formation on adhesive bond strength." Diss., Virginia Tech, 1995. http://hdl.handle.net/10919/39045.
Повний текст джерелаOliveira, Monica S. N., Roger Yeh, and Gareth H. McKinley. "Iterated Stretching, Extensional Rheology and Formation of Beads-on-a-String Structures in Polymer Solutions." 2005. http://hdl.handle.net/1721.1/31210.
Повний текст джерелаAccepted for publication in JNNFM, December 2005.
NASA and the Portuguese Science Foundation
Pourdarvish, Mohammadi Reza. "Mechanism of bubble formation during the drying of polymer films." 2005. http://etda.libraries.psu.edu/theses/approved/WorldWideIndex/ETD-773/index.html.
Повний текст джерелаКниги з теми "Polymer stretching during formation"
Davis, Fred J., ed. Polymer Chemistry. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780198503095.001.0001.
Повний текст джерелаWest, E. James. Ebony Magazine and Lerone Bennett Jr. University of Illinois Press, 2020. http://dx.doi.org/10.5622/illinois/9780252043116.001.0001.
Повний текст джерелаЧастини книг з теми "Polymer stretching during formation"
Takaki, Tomohiro, M. Asanishi, A. Yamanaka, and Yoshihiro Tomita. "Phase-Field Simulation during Spherulite Formation of Polymer." In The Mechanical Behavior of Materials X, 939–42. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-440-5.939.
Повний текст джерелаKlumperman, Bert, Pierre Smids, and Martin van Duin. "Oligomer Formation During the Copolymerization of Styrene and Maleic Anhydride." In Integration of Fundamental Polymer Science and Technology—5, 100–103. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3890-1_13.
Повний текст джерелаDušek, Karel, and Michal Ilavský. "Effect of Dilution During Network Formation on Cyclization and Topological Constraints in Polyurethane Networks." In Biological and Synthetic Polymer Networks, 233–42. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1343-1_14.
Повний текст джерелаFaupel, F., A. Thran, M. Kiene, T. Strunskus, V. Zaporojtchenko, and K. Behnke. "Diffusion Of Metals In Polymers And During Metal/Polymer Interface Formation." In Springer Series in Advanced Microelectronics, 221–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55908-2_8.
Повний текст джерелаEu, Ming-Da, and Robert Ullman. "Small-Angle Neutron Scattering Studies of Polymer Interdiffusion During Latex Film Formation." In ACS Symposium Series, 79–95. Washington, DC: American Chemical Society, 1996. http://dx.doi.org/10.1021/bk-1996-0648.ch006.
Повний текст джерелаSidashov, A. V., and M. V. Boiko. "Surface Films Formation on Steel During Friction of Polymer Composites Containing Microcapsules with Lubricant." In Lecture Notes in Mechanical Engineering, 1259–68. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22041-9_131.
Повний текст джерелаArinstein, Arkadii. "Supermolecular Structure Formation During Electrospinning, and Its Effect on Electrospun Polymer Nanofiber Unique Features." In Advanced Structured Materials, 173–204. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92234-8_11.
Повний текст джерелаSenchurov, S. P., and Yu F. Zabashta. "The Formation and Destruction of the Boundary Layer in Polymer Composite Fiber Shells during Their Ageing." In Materials Science Forum, 295–98. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-964-4.295.
Повний текст джерелаPanin, Sergey V., Lyudmila A. Kornienko, Nguyen Duc Anh, Vladislav O. Alexenko, Dmitry G. Buslovich, and Svetlana A. Bochkareva. "Three-Component Wear-Resistant PEEK-Based Composites Filled with PTFE and MoS2: Composition Optimization, Structure Homogenization, and Self-lubricating Effect." In Springer Tracts in Mechanical Engineering, 275–99. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_13.
Повний текст джерелаErman, Burak, and James E. Mark. "Intermolecular Effects: I. The Constrained-Junction Model." In Structures and Properties of Rubberlike Networks. Oxford University Press, 1997. http://dx.doi.org/10.1093/oso/9780195082371.003.0005.
Повний текст джерелаТези доповідей конференцій з теми "Polymer stretching during formation"
Wang, C. H., and H. F. Nied. "Numerical Simulation of Heat Transfer During Thermoforming." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0620.
Повний текст джерелаPark, Donghyun, Dae Ung Park, Kee-Sun Han, Soo Jin Shin, Hyun-Ah Oh, Tae Sung Oh, Jung-Yeol Choi, and S. K. Hynix. "Formation of metal interconnects and their resistance-change behavior during tensile stretching for stretchable packaging applications." In 2016 Pan Pacific Microelectronics Symposium (Pan Pacific). IEEE, 2016. http://dx.doi.org/10.1109/panpacific.2016.7428421.
Повний текст джерелаWang, Xiaoxi, Vipin Kumar, and Wei Li. "A Study of PLA Crystallization During Solid-State Foaming." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42547.
Повний текст джерелаZitha, P. L. J., A. Barnhoorn, and R. Logister. "Pressure Behavior and Fracture Development During Polymer Injection in a Heavy Oil Saturated Unconsolidated Sand." In SPE European Formation Damage Conference and Exhibition. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/174232-ms.
Повний текст джерелаDenton, Heidi L., and Robert M. Wallace. "Controlling polymer formation during polysilicon etching in a magnetically enhanced reactive ion etcher." In Microelectronic Processing '92, edited by James A. Bondur, Gary Castleman, Lloyd R. Harriott, and Terry R. Turner. SPIE, 1993. http://dx.doi.org/10.1117/12.142931.
Повний текст джерелаSedghi, Mohammad, and Lamia Goual. "Molecular Dynamics Simulations of Asphaltene Dispersion by Limonene and PVAc Polymer During CO2 Flooding." In SPE International Conference and Exhibition on Formation Damage Control. Society of Petroleum Engineers, 2016. http://dx.doi.org/10.2118/179040-ms.
Повний текст джерелаBrattekås, B., M. Steinsbø, A. Graue, M. A. Fernø, H. Espedal, and R. S. Seright. "New Insight to Wormhole Formation in Polymer Gel During Water Chasefloods Using Positron Emission Tomography PET." In SPE Bergen One Day Seminar. Society of Petroleum Engineers, 2016. http://dx.doi.org/10.2118/180051-ms.
Повний текст джерелаLiu, Ya, Rebecca Vilain, and Dong Shen. "How Does EOR Polymer Impact Scale Control During ASP Flooding?" In SPE International Conference on Oilfield Chemistry. SPE, 2021. http://dx.doi.org/10.2118/204350-ms.
Повний текст джерелаValencia*, Luis E., Lesley A. James, and Karem Azmy. "Pore System Changes During Experimental Polymer Flooding in Ben Nevis Formation Sandstones, Hebron Field, Offshore Eastern Canada." In International Conference and Exhibition, Melbourne, Australia 13-16 September 2015. Society of Exploration Geophysicists and American Association of Petroleum Geologists, 2015. http://dx.doi.org/10.1190/ice2015-2204523.
Повний текст джерелаBegley, M. R., J. M. Ambrico, and E. H. Jordan. "Growth and Failure of Oxide Irregularities During Thermal Cycling: Interactions Between Stress, Geometry and Oxide Formation." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2686.
Повний текст джерела