Добірка наукової літератури з теми "Polyethylene Stresses"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polyethylene Stresses".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Polyethylene Stresses"
Huang, Chang-Hung, Yung-Chang Lu, Lin-I. Hsu, Jiann-Jong Liau, Ting-Kuo Chang, and Chun-Hsiung Huang. "Effect of material selection on tibial post stresses in posterior-stabilized knee prosthesis." Bone & Joint Research 9, no. 11 (November 1, 2020): 768–77. http://dx.doi.org/10.1302/2046-3758.911.bjr-2020-0019.r2.
Повний текст джерелаFisher, H. P., R. K. Eby, and R. C. Cammarata. "Surface stresses in paraffin and polyethylene." Polymer 35, no. 9 (January 1994): 1923–30. http://dx.doi.org/10.1016/0032-3861(94)90982-2.
Повний текст джерелаSwieszkowski, W., P. Bednarz, and P. J. Prendergast. "Contact stresses in the glenoid component in total shoulder arthroplasty." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 217, no. 1 (January 1, 2003): 49–57. http://dx.doi.org/10.1243/095441103762597737.
Повний текст джерелаMasayuki, Nishida, Hanabusa Takao, and Yasukazu Ikeuchi. "X-Ray Stress Measurement of Fiber Reinforced Plastics Composite Material." Key Engineering Materials 353-358 (September 2007): 2423–26. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.2423.
Повний текст джерелаSerebrennikov, Anatoly, Daniil Serebrennikov, and Zufar Hakimov. "Polyethylene Pipeline Bending Stresses at an Installation." American Journal of Engineering and Applied Sciences 9, no. 2 (February 1, 2016): 350–55. http://dx.doi.org/10.3844/ajeassp.2016.350.355.
Повний текст джерелаBilgin, Ömer. "Modeling Viscoelastic Behavior of Polyethylene Pipe Stresses." Journal of Materials in Civil Engineering 26, no. 4 (April 2014): 676–83. http://dx.doi.org/10.1061/(asce)mt.1943-5533.0000863.
Повний текст джерелаKandemir, Göksu, Simon Smith, and Thomas J. Joyce. "The influence of contact stress on the wear of cross-linked polyethylene." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 232, no. 10 (August 23, 2018): 1008–16. http://dx.doi.org/10.1177/0954411918796047.
Повний текст джерелаTriwardono, Joko, Agung Shamsuddin Saragih, Fuad Abrar, Muhammad Satrio Utomo, Ika Kartika, Yudan Whulanza, and Sugeng Supriadi. "Finite Element Analysis Contact Stresses on Tibiofemoral Joint and Post Polyethylene Components Used to Evaluated Predesign Knee Implant." Journal of Biomimetics, Biomaterials and Biomedical Engineering 55 (March 28, 2022): 46–55. http://dx.doi.org/10.4028/p-uv1qax.
Повний текст джерелаMiller, M. C., P. Smolinski, S. Conti, and K. Galik. "Stresses in Polyethylene Liners in a Semiconstrained Ankle Prosthesis." Journal of Biomechanical Engineering 126, no. 5 (October 1, 2004): 636–40. http://dx.doi.org/10.1115/1.1798011.
Повний текст джерелаD???Lima, Darryl D., Peter C. Chen, and Clifford W. Colwell. "Polyethylene Contact Stresses, Articular Congruity, and Knee Alignment." Clinical Orthopaedics and Related Research 392 (November 2001): 232–38. http://dx.doi.org/10.1097/00003086-200111000-00029.
Повний текст джерелаДисертації з теми "Polyethylene Stresses"
Olasz, Lorant. "Residual Stresses and Strains in Cross-linked Polyethylene Power Cable Insulation." Doctoral thesis, Stockholm, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4020.
Повний текст джерелаZhang, Jingyu Hsuan Grace. "Experimental study of stress cracking in high density polyethylene pipes /." Philadelphia, Pa. : Drexel University, 2006. http://dspace.library.drexel.edu/handle/1860/747.
Повний текст джерелаChoollun, Virendra Kumar. "Residual stresses in high density polyethylene pipes with particular reference to its effects on soil-pipe interaction." Thesis, University of East London, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532873.
Повний текст джерелаDanikas, Michalis G. "A study of the behaviour of a uniaxially orientated polyethylene tape/oil insulating system subjected to electrical and thermal stresses." Thesis, Queen Mary, University of London, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297024.
Повний текст джерелаLees, J. S. "Vibrational spectroscopy of stressed and unstressed polyethylene and isotactic polypropylene." Thesis, University of Bradford, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379832.
Повний текст джерелаDaming, Duan. "Fracture toughness and term fracture behaviour of polyethylenes." Thesis, Imperial College London, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.243909.
Повний текст джерелаFarid, Syed Imran. "Viscoelastic properties of wood-fiber-reinforced polyethylene, stress relaxation, creep and threaded joints." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0021/MQ58722.pdf.
Повний текст джерелаWilloughby, Carl Edward Peter. "Investigation of the effects of internal stress in polyethylene fibre-epoxy resin composites." Thesis, Brunel University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.311237.
Повний текст джерелаBali, Sinazo. "Polyethylene glycol (PEG) induced water stress alters the physiological and molecular responses of chia plants." The University of the Western Cape, 2017. http://hdl.handle.net/11394/5787.
Повний текст джерелаWater deficit is known to be one of the most detrimental environmental factors to affect crop production and growth in South Africa. This factor has become more apparent with increasing cases of drought in the country.
Bicalho, Julio Roberto Santos. "Modelagem computacional de um reator anaeróbico fabricado em polietileno de alta densidade rotomoldado." Universidade do Estado do Rio de Janeiro, 2007. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=415.
Повний текст джерелаThe present work was developed to evaluate the potential of uses of an anaerobic reactor manufactured in HDPE High Density Polyethylene produced by the rotomolding process in substitution to the conventional reactors built in stonemasonry, working in a batch regime and buried in the soil. The state of tensions and the deformations were assessed using the program of Finite Elements ABAQUS version 6.5 and the mesh of the knots using the program MSC PATRAN 2005 forming 7329 knots and 2004 elements, in an optimized mesh for the areas of larger curvature (tension concentrator points). The loading is formed with an internal pressure of the biogas of 5kPa added of biomass hydrostatic load of 6000 kg in an elastic foundation calculated by the ratio pressure/settling starting from the Module of equivalent Elasticity of the soil (Esolo). Comparing the state of tensions assessed during the loading was possible to verify that the largest tension obtained in the most critical element goes the most probable utilization of the reactor, reached the value of 7, 46 MPa (it doesn't surpass 40% of the smallest resistance value to the traction and to the shearing strain of HDPE of 20 MPa) and the largest ratio of dR/R deformation was of 1.0%. The most critical assessed case was when the reactor is buried in soil with Esolo = 1,55 MPa and material with EPEAD = 1550 MPa, totally empty and with a superficial overload in the land of 20kN/m2 generating a tension of 17,80 MPa in the element 1955 (reaching 89% of the smallest resistance value to the traction and the shearing strain of a 20 MPa HDPE). The obtained results confirmed that the reactor produced in HDPE substitutes with advantages the models manufactured in stonemasonry, supporting the internal biogas pressure and the biomass load.
Книги з теми "Polyethylene Stresses"
Victor, Elias, United States. Federal Highway Administration. Offices of Research and Development., and Turner-Fairbank Highway Research Center, eds. Stress cracking potential of HDPE geogrids. McLean, Va: U.S. Dept. of Transportion, Federal Highway Administration, Research and Development, 1998.
Знайти повний текст джерелаViscoelastic properties of wood-fiber reinforced polyethylene: Stress relaxation, creep and threaded joints. Ottawa: National Library of Canada, 2000.
Знайти повний текст джерелаLees, John Simon. Vibrational spectroscopy of stressed and unstressed polyethlene and isotactic polypropylene: Raman and F.T.I.R. spectroscopic studies of uniaxially drawn films of stressed polyethylene.... Bradford, 1987.
Знайти повний текст джерелаЧастини книг з теми "Polyethylene Stresses"
Velho, A. M., A. C. Diogo, and G. Marin. "Time Evolution of Normal Stresses in Strong Shear Flows of Polyethylene Melts." In Progress and Trends in Rheology V, 413–14. Heidelberg: Steinkopff, 1998. http://dx.doi.org/10.1007/978-3-642-51062-5_199.
Повний текст джерелаSweeney, J., and I. M. Ward. "Modelling Stress Relaxation and Creep in Oriented Polyethylene." In Anisotropy and Localization of Plastic Deformation, 520–23. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3644-0_121.
Повний текст джерелаKip, Bert J., Marcel C. P. van Eijk, and Robert J. Meier. "Molecular Strain in High Modulus Polyethylene Fibers During Stress Relaxation Studied by Raman Microscopy." In Integration of Fundamental Polymer Science and Technology—5, 183–87. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3890-1_22.
Повний текст джерелаZhang, Ling, Yuanxiang Zhou, and Zhaowei Wang. "Electrical Property of Polypropylene Toughened by β Nucleating Agent." In Polypropylene Materials [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.107118.
Повний текст джерелаLustiger, Arnold. "Understanding Environmental Stress Cracking in Polyethylene." In Medical Plastics, 65–71. Elsevier, 1998. http://dx.doi.org/10.1016/b978-188420760-0.50010-7.
Повний текст джерела"Stress Crack Testing Of Polyethylene Geomembranes." In Geomembranes - Identification and Performance Testing, 251–63. CRC Press, 1990. http://dx.doi.org/10.1201/9781482267501-19.
Повний текст джерелаRao, Vyshnavi V., Sonashree R., and Rashmi R. Halbavi. "Review on Plastic Waste Disposal and Role of Microorganisms in Bioremediation of Plastics." In Advances in Environmental Engineering and Green Technologies, 236–47. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-4921-6.ch011.
Повний текст джерелаRao, Vyshnavi V., Sonashree R., and Rashmi R. Halbavi. "Review on Plastic Waste Disposal and Role of Microorganisms in Bioremediation of Plastics." In Research Anthology on Emerging Techniques in Environmental Remediation, 481–92. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-6684-3714-8.ch025.
Повний текст джерелаТези доповідей конференцій з теми "Polyethylene Stresses"
Suggs, Jeremy F., George R. Hanson, and Guoan Li. "In-Vivo Tibiofemoral Contact Stress in the Knee After TKA." In ASME 2007 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2007. http://dx.doi.org/10.1115/sbc2007-176664.
Повний текст джерелаChu, Taiming, Jing Chen, and Michael Pappas. "Finite Element Analysis of Contact Stresses in Metal-Plastic Total Knee Replacement." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0115.
Повний текст джерелаHachour, Kamel, Meziane Aberkane, and Rabah Ferhoum. "Experimental Investigation of High Density Polyethylene Yield Surface Under Biaxial Loading." In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82674.
Повний текст джерелаKurtz, Steven M., Charles W. Jewett, John E. Moalli, and Avram A. Edidin. "An Elastic-Plastic Material Model for the True Stress-Strain Behavior of Ultra-High Molecular Weight Polyethylene in Tension and Compression." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0353.
Повний текст джерелаHouchaime, W., A. Petrella, T. Dietz, J. Halloran, and P. Rullkoetter. "Development of a Rate-Dependent Material Model for UHMWPE Joint Replacement Components." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/bed-23050.
Повний текст джерелаMarohl, Michael P. H., Glenn R. Frazee, and Thomas M. Musto. "Relative Influence of Soil Stiffness and Elbow Geometry on Buried Piping Thermal Stresses." In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-65591.
Повний текст джерелаBaldini, Todd H., Timothy M. Wright, Jaime A. Estupiñán, and Donald L. Bartel. "An Apparatus for Studying Wear Damage in UHMWPE: Description and Initial Test Results." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0167.
Повний текст джерелаRomero, Francisco, Farid Amirouche, Mark Gonzalez, and Todd Render. "Induced Stresses and Shell/Liner Micromotions in THA Components During Dislocation: A Finite Element Study." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32614.
Повний текст джерелаKurtz, Steven M., Jorge A. Ochoa, and Christopher V. White. "Liner/Shell Load Transfer Mechanisms in a Modular Acetabular Component for Total Hip Replacement." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0349.
Повний текст джерелаHaeri, Navid, and Brian A. Cornah. "Repercussion of Autofrettage on the Fatigue Crack Growth in the Vicinity of Catalyst Entry Opening for Polyethylene Autoclave Reactor." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45402.
Повний текст джерелаЗвіти організацій з теми "Polyethylene Stresses"
Rogers, C. E. Stress Cracking of Polyethylene in Organic Liquids. Fort Belvoir, VA: Defense Technical Information Center, February 1986. http://dx.doi.org/10.21236/ada165733.
Повний текст джерелаWatson, Mark, Martyn Wilmott, and Brian Erno. GRI-96-0452_2 Stress Corrosion Cracking Under Field Simulated Conditions II. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), November 1997. http://dx.doi.org/10.55274/r0011974.
Повний текст джерелаBruce and Li. L51666 Surface Preparation and Coatings on the Susceptibility of Line Pipe to Stress-Corrosion Cracking. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), February 1992. http://dx.doi.org/10.55274/r0010315.
Повний текст джерела