Дисертації з теми "Polyethylene oxide (POE)"

En s'inspirant du vivant, le biomimétisme invite à développer de nouvelles familles de matériaux, pour des applications variées. Dans ce contexte, des assemblages supramoléculaires de type (pseudo)polyrotaxanes, semblables à des colliers de perles, pourraient permettre d'obtenir des matériaux innovants stimulables, par exemple des matériaux capables de mimer le mouvement d'un muscle sous l'effet d'un stimulus. L'objectif de cette thèse a été de synthétiser des (pseudo)polyrotaxanes biocompatibles et thermostimulables, à partir de γ-cyclodextrine (γ-CD) et de copolymères à blocs, constitués de poly(N-isopropylacrylamide) (PNIPAM) et de poly(oxyde d'éthylène) (POE), afin d'obtenir des matériaux dont les propriétés mécaniques pourraient être modifiées de manière réversible en réponse à un stimulus extérieur. Le PNIPAM a été choisi pour son caractère thermosensible, tandis que le POE, a lui été choisi pour son affinité particulière avec les cyclodextrines, facilitant ainsi leur enfilage. Au cours de ces travaux de thèse, la formation d'assemblages supramoléculaires avec des CDs a d'abord été étudiée en présence d'homopolymères de PNIPAM et de POE (de longueurs variables et d'extrémités variables), puis avec des copolymères diblocs, puis triblocs (ABA ou BAB), synthétisés selon différentes voies (couplage, ATRP, RAFT). La caractérisation des édifices a été réalisée en mobilisant diverses techniques d'analyse : RMN 1H, MALDI-TOF, DRX, CES et TGA. Les résultats ont montré que les γ-CDs s'enfilaient majoritairement sur le bloc de POE qu'il soit situé au centre ou aux extrémités des différents copolymères avec un nombre de CDs que l'on peut contrôler, en fonction de la stœchiométrie (γ-CDs) : (polymère) adoptée avant la complexation, la longueur des chaines, la température. Plusieurs architectures ont été proposées pour ces assemblages
Inspired by the living world, biomimicry encourages the development of new families of materials for a wide range of applications. In this context, (pseudo)polyrotaxane-type supramolecular assemblies, like strings of pearls, could make it possible to obtain innovative stimulable materials, for example materials capable of mimicking the movement of a muscle under the effect of a stimulus. The aim of this thesis was to synthesize biocompatible, thermostimulable (pseudo)polyrotaxanes from γ-cyclodextrin (γ-CD) and block copolymers, consisting of poly(N-isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) (POE), in order to obtain materials whose mechanical properties could be reversibly modified in response to an external stimulus. PNIPAM was chosen for its thermosensitive properties, while POE was chosen for its particular affinity with cyclodextrins, making them easier to thread. During this thesis work, the formation of supramolecular assemblies with CDs was first studied in the presence of homopolymers of PNIPAM and POE (of variable lengths and variable ends), then with diblock, then triblock copolymers (ABA or BAB), synthesized by different routes (coupling, ATRP, RAFT). Characterization of the edifices was carried out by mobilizing various analytical techniques: 1H NMR, MALDI-TOF, DRX, CES and TGA. The results showed that γ-CDs threaded predominantly onto the POE block whether located in the center or at the ends of the various copolymers with a number of CDs that could be controlled, depending on the (γ-CDs):(polymer) stoichiometry adopted prior to complexation, chain length, temperature. Several architectures have been proposed for these assemblies

A novel approach was used to synthesize bioactive polyurethanes by applying polypropylenimine octaamine dendrimers as the chain extenders, while another approach trying to incorporate star PEO (polyethylene oxide) directly into polyurethane failed to attain appropriate polymers. A protection/deprotection strategy was used to incorporate the dendrimers into the polyurethane chains, then PEO was chemically attached after deprotection to increase the biocompatibility of the material. A generation 2.0 polypropylenimine octaamine dendrimer which has eight arms ending with amine groups, was used for the modification. The dendrimers were protected using the N-hydroxy-succinimide ester of a tert-butyloxycarbonyl (tBOC)-protected alanine or 9-Fluorenylmethyloxycarbonyl chlorocarbonate (Fmoc) in methylene chloride-triethylamine. A molar ratio of 6:1 (protecting group:dendrimer) was used to get a statistical distribution of protected dendrimers in which most of the dendrimers would have 6 arms protected. The partially protected dendrimers were used with ethylene diamine (ED) or butanediol (BDO) as a chain extender (molar ratio of dendrimer ED/DO = 1:9) to produce the dendrimer modified polyurethanes. After deprotection of the dendrimers, PEG-SPA (Polyethylene Glycol-Succinimidyl Propionate) was used to attach PEO to the polyurethane chains. (Abstract shortened by UMI.)

A combination of surface analytical techniques, colloid probe Atomic Force Microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS) was used to optimise the grafting density of covalently attached 5, 20 and 40 kDa methoxy-terminated PEO layers (under marginal solvation (cloud point) conditions for the PEO molecules). The combination of these techniques allowed us to relate the PEO layer density and molecular conformations to the range, magnitude and types of forces generated by coatings of various grafting densities. The key optimisation parameter was the grafting time with the concentration of PEO in solution having a weaker effect. Oxidation of the substrate occurred, but did not significantly limit the surface density of the functional groups used to chemically attach the PEO molecules. Interactions between the substrate and silica were electrostatic in origin and did not contribute to the interaction between silica and the PEO surfaces due to salt screening effects Surfaces with dense, highly stretched PEO layers (brushes) generated purely repulsive forces at all separation distances, arising from compression by the silica spherical probe used. The force profiles for lower density surfaces comprised long-ranged attractive and short-ranged repulsive forces. The attractive forces were most likely due to attractive bridging interactions between the PEO chains and the SiO2 surface. For low grafting densities, i.e. inter-chain grafting distances, s > ??RF, the PEO layers were not strongly stretched and free to adsorb onto the opposing silica surface. XPS analysis demonstrated that HSA and Fibrinogen adsorbed onto low density 20 kDa PEO coatings (s > ??RF), most likely via diffusion through the PEO layer. No protein adsorption was found (detection limit > 10 ng/cm2) on high density, ???strongly stretched brush??? coatings (s < ?? RF). Analysis of data from the more sensitive Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) techniques indicated that low amounts of adsorbed HSA, lactoferrin, lysozyme, and IgG were present on high density 20 and 40 kDa surfaces; the most likely explanation being attractive interactions between the proteins and the PEO layers during the protein adsorption experiments. ToF-SIMS data obtained for the strongly stretched (s < ?? RF) 5 kDa PEO surfaces suggested that no protein was adsorbed, in line with the XPS data for the same surfaces.

Ce travail concerne l'étude du comportement rhéologique de nanocomposites modèles à base de Laponite dans du polyoxyde d'éthylène ou des mélanges polyoxyde d'éthylène avec du polyméthacrylate de méthyle. L'influence des paramètres moléculaires, masse molaire de la matrice et mode de protection des particules sur les propriétés rhéologiques a été étudiée. La meilleure dispersion est obtenue à partir d'une solution, la dilution d'un mélange maître conduisant à des matériaux hétérogènes. Les mélanges POE/PMMA sont compatibles à l'état fondu dans toute la gamme de concentrations mais hétérogènes à température ambiante au-dessus de 30% en poids de particules. En diluant un mélange Laponite/PEO dans le PMMA, nous avons montré que ces domaines se concentrent en particules en dessous de 30% de PEO et qu'une cocontinuité de phases PEO contenant les particules et PMMA essentiellement pur est formée au-dessus de 30% de PEO. La présence des particules diminue fortement la cristallinité.

The research discussed in this dissertation was conducted to understand drop formation of inkjet printing with inks containing polymer. Solutions containing a water soluble polymer, poly ethylene oxide (PEO), with different molecular weights and polydispersities were used as inks. A flash photographic technique was used to visualize the whole process of DOD drop formation of dilute polymer solutions. The effects of driving signal, frequency and liquid properties on drop speed, drop size, breakup time and the formation of satellites were studied in detail. The addition of PEO increases the shear viscosity at all molecular weights, but the change is small for dilute solutions. However, the addition of a small amount of PEO can have a significant effect on the DOD drop formation process, increasing breakup time, decreasing primary drop speed and decreasing the number of satellites in some cases. The effects depend on both molecular weight and concentration. At lower molecular weights (14k and 35k g/mol), the effect of PEO was small when the drop formation process for the dilute solution was compared with that of a Newtonian liquid having similar shear viscosity, and the effect of PEO was small even at concentrations large enough that the solution does not fall in the dilute regime. As molecular weight is increased, the effects of PEO on DOD drop formation increase significantly, and the effects of concentration become important. These effects are explained by the fluid elasticity which increases with increasing in molecular weight and concentration. When the liquid jets out of the nozzle, the polymer chains are stretched, and thus depart from their ideal coiled state. As a result, an elastic stress develops in the liquid column and resists capillarity-driven pinch off from the nozzle and is responsible for the decrease in drop speed and longer breakup time. DOD drop formation data were shown to correlate closely with effective relaxation time, proposed by Tirtaatmadja based on Rouse-Zimm theory. When driving voltage amplitude is 44.2 V, two important parameters (breakup time and primary drop speed) in DOD drop formation for solutions containing monodispersed PEO and aqueous solutions containing mixtures of monodispersed PEO were closely predicted by correlation equations involving effective relaxation time . A mixture rule was developed to calculate the relaxation time for mixtures of monodispersed PEO. However, for polydispersed PEO, effective relaxation time was based on viscous molecular weight since the molecular weight distributions of the polydispersed PEO were unknown. When breakup time was plotted versus effective relaxation time for 1000k g/mol PEO, the data did not lie on the same line as that for the 100k and 300k g/mol PEO. This is believed to be due to the molecular weight distributions of the polydispersed PEO. When more than one species are present, viscous average molecular weight does not adequately account for the long chain species making up the polymer sample. DOD drop formation dynamics is highly affected by the actuating waveform, including the driving voltage, waveform shape, and frequency. The effects of parameters (jetting frequency, voltage amplitude and the shape of waveform) characterizing the signal were investigated. The open time and first drop problem were also studied. Research in this dissertation gives a better understanding of DOD drop formation process of polymer solutions, which may lead to improvement of inkjet printing quality for a variety of industry inks and polymer micro scale deposition and patterning in large areas.

The potential applications of dispersed and self-assembled nanoparticles depend critically on accurate control and prediction of their phase behavior. The chemical potential is essential in describing the equilibrium distribution of all components present in every phase of a system and is useful as a building block for constructing phase diagrams. Furthermore, the chemical potential is a sensitive indicator of the local environment of a molecule or particle and is defined in a mathematically rigorous manner in both classical and statistical thermodynamics. The goal of this research is to use simulations and experiments to understand how particle size and composition affect the particle chemical potential of attractive nanoparticle-polymer mixtures. The expanded ensemble Monte Carlo (EEMC) simulation method for the calculation of the particle chemical potential for a nanocolloid in a freely adsorbing polymer solution is extended to concentrated polymer mixtures. The dependence of the particle chemical potential and polymer adsorption on the polymer concentration and particle diameter are presented. The perturbed Lennard-Jones chain (PLJC) equation of state (EOS) for polymer chains1 is adapted to calculate the particle chemical potential of nanocolloid-polymer mixtures. The adapted PLJC equation is able to predict the EEMC simulation results of the particle chemical potential by introducing an additional parameter that reduces the effects of polymer adsorption and the effective size of the colloidal particle. Osmotic pressure measurements are used to calculate the chemical potential of nanocolloidal silica in an aqueous poly(ethylene oxide) (PEO) solution at different silica and PEO concentrations. The experimental data was compared with results calculated from Expanded Ensemble Monte Carlo (EEMC) simulations. The results agree qualitatively with the experimentally observed chemical potential trends and illustrate the experimentally-observed dependence of the chemical potential on the composition. Furthermore, as is the case with the EEMC simulations, polymer adsorption was found to play the most significant role in determining the chemical potential trends. The simulation and experimental results illustrate the relative importance of the particles size and composition as well as the polymer concentration on the particle chemical potential. Furthermore, a method for using osmometry to measure chemical potential of nanoparticles in a nanocolloid-mixture is presented that could be combined with simulation and theoretical efforts to develop accurate equations of state and phase behavior predictions. Finally, an equation of state originally developed for polymer liquid-liquid equilibria (LLE) was demonstrated to be effective in predicting nanoparticle chemical potential behavior observed in the EEMC simulations of particle-polymer mixtures.

The steep rise in the contamination of natural water sources, has led to an increasing demand for alternate solutions to cater safe drinking water to mankind. Water treatment by separation technology utilizes semipermeable membranes to filter the contaminants commonly present in potable water. In this context, the current work focuses on the development of membranes that are affordable, exhibit chemical resistance and can be developed at industrial scale. By blending two immiscible polymers like polyethylene (PE) and polyethylene oxide (PEO), different morphologies can be generated and porous structures can be developed by selectively etching the water soluble phase (PEO). Microorganisms in the feed stream often tend to foul the membrane by forming biofilms on the surface that tends to increase the resistance offered by the membrane. Therefore, preventing this biofilm is a key challenge in this field and can be overcome by use of functional group or materials that prevent the attachment or growth of microorganisms on the surface, while maintaining a good permeation rate of water. This thesis entitled “Porous Antibacterial Membranes Derived from Polyethylene (PE)/Polyethylene oxide (PEO) Blends and Engineered Nanoparticles” systematically studies the various morphologies generated by melt blending polyethylene (PE)/polyethylene oxide (PEO) in presence and absence of a compatibilizer (maleated PE). Porous structures are developed by selectively etching PEO from the blends and the nature of the pores, which is dependent on the blend composition, is assessed by tomography. The potential of these membranes are discussed for water purification application. Further, various modifications either on the surface or in the bulk have been systematically studied. For instance, incorporation of biocidal agents like graphene oxide (GO) and modified GO in the matrix and coating/grafting of membrane surface with biocidal agents like silver (Ag), GO for preventing the biofouling and to meet the specific requirements for safe drinking water. The thesis consists of ten chapters. Chapter 1 is a review on polymer blends for membrane applications. This chapter covers the fundamentals of polymer blends in transport processes and compares the merits and demerits of the conventional methods. This chapter mainly covers the melting blending technique and the optimizing parameters for obtaining a desired morphology. Further, the various methodologies for stabilization of the morphology against post processing operation have been discussed. The various methodologies for designing membranes (for water purification) that suppress or inhibit the bacterial activity on the membrane surfaces have been discussed elaborately. Chapter 2 outlines the materials, experimental set-up and procedures employed. Chapter 3 focuses on the morphologies that are developed during the blending of PE/PEO with varying weight ratios. The morphologies developed are supported by SEM analysis. The factors governing the localization of particles in PE/PEO blends are discussed in detail. The gradient in morphology obtained during post processing operations is highlighted. Based on the type of morphologies obtained, the thesis is divided into two parts as (I) membranes designed using matrix droplet type of morphology and (II) membranes designed using co-continuous morphology. Part I consists of four chapters that involves the development of membranes utilizing matrix droplet morphology. Chapter 4 focuses on the development of morphology, the length scales of which are smaller than a bacterial cell. This ensures sieving of the contaminants that are commonly present in the drinking water though the surface of the membranes may not be antibiofouling. Thus a passive strategy of antibiofouling has been employed by blending biocidal agents like GO and amine modified GO during melt mixing. The antibacterial mechanism and its effect on bacterial activity have been thoroughly studied. Chapter 5 focuses on modification of membrane by incorporating silver decorated GO in the bulk. The effect of incorporation of these particles and their effect on bacterial activity have been discussed systematically. Chapter 6 emphasizes on the surface coating of membrane with chitosan to enhance the antibacterial activity and antibiofouling. Chapter 7 focuses on the development of membrane with pore sizes that are larger than a bacterial cell. These membranes are grafted with antibacterial polymers like polyethylene imine (PEI) and Ag to achieve antibacterial and antibiofouling surface. The possible mechanism of bacterial inactivity is described and the leaching of Ag from the membranes has been discussed. Part II of the thesis focuses on the development of co-continuous morphology in PE/PEO blends and has been assessed using 3D tomography. Chapter 8 describes the development of co-continuous morphology in PE/PEO blend. 2D and 3D micrographs have been corroborated for understanding the morphology evolution during post processing operation like remelting or hot-pressing. The blend has been strategically compatibilized to arrest the morphology and retain the co-continuity in the blends. GO was anchored onto the surface of the membrane by rendering suitable surface active groups. The antibiofouling and bacterial inhibition was studied in detail. The effect of anchoring GO on the membrane surface has been discussed with respect to their membrane performance and its antibacterial activity. Chapter 9 discusses the development of membranes using PE based Ionomer (Surlyn) and PEO. The Ionomer provided active sites for reducing silver nitrate directly onto the surface of PE to render antibacterial surface which otherwise requires a two-step protocol in the case of inert PE. The effect of coating Ag on the membrane performance and its antibacterial activity is elaborated. Chapter 10 sums up the major conclusions from each chapter and highlights the outcome of the work.

The steep rise in the contamination of natural water sources, has led to an increasing demand for alternate solutions to cater safe drinking water to mankind. Water treatment by separation technology utilizes semipermeable membranes to filter the contaminants commonly present in potable water. In this context, the current work focuses on the development of membranes that are affordable, exhibit chemical resistance and can be developed at industrial scale. By blending two immiscible polymers like polyethylene (PE) and polyethylene oxide (PEO), different morphologies can be generated and porous structures can be developed by selectively etching the water soluble phase (PEO). Microorganisms in the feed stream often tend to foul the membrane by forming biofilms on the surface that tends to increase the resistance offered by the membrane. Therefore, preventing this biofilm is a key challenge in this field and can be overcome by use of functional group or materials that prevent the attachment or growth of microorganisms on the surface, while maintaining a good permeation rate of water. This thesis entitled “Porous Antibacterial Membranes Derived from Polyethylene (PE)/Polyethylene oxide (PEO) Blends and Engineered Nanoparticles” systematically studies the various morphologies generated by melt blending polyethylene (PE)/polyethylene oxide (PEO) in presence and absence of a compatibilizer (maleated PE). Porous structures are developed by selectively etching PEO from the blends and the nature of the pores, which is dependent on the blend composition, is assessed by tomography. The potential of these membranes are discussed for water purification application. Further, various modifications either on the surface or in the bulk have been systematically studied. For instance, incorporation of biocidal agents like graphene oxide (GO) and modified GO in the matrix and coating/grafting of membrane surface with biocidal agents like silver (Ag), GO for preventing the biofouling and to meet the specific requirements for safe drinking water. The thesis consists of ten chapters. Chapter 1 is a review on polymer blends for membrane applications. This chapter covers the fundamentals of polymer blends in transport processes and compares the merits and demerits of the conventional methods. This chapter mainly covers the melting blending technique and the optimizing parameters for obtaining a desired morphology. Further, the various methodologies for stabilization of the morphology against post processing operation have been discussed. The various methodologies for designing membranes (for water purification) that suppress or inhibit the bacterial activity on the membrane surfaces have been discussed elaborately. Chapter 2 outlines the materials, experimental set-up and procedures employed. Chapter 3 focuses on the morphologies that are developed during the blending of PE/PEO with varying weight ratios. The morphologies developed are supported by SEM analysis. The factors governing the localization of particles in PE/PEO blends are discussed in detail. The gradient in morphology obtained during post processing operations is highlighted. Based on the type of morphologies obtained, the thesis is divided into two parts as (I) membranes designed using matrix droplet type of morphology and (II) membranes designed using co-continuous morphology. Part I consists of four chapters that involves the development of membranes utilizing matrix droplet morphology. Chapter 4 focuses on the development of morphology, the length scales of which are smaller than a bacterial cell. This ensures sieving of the contaminants that are commonly present in the drinking water though the surface of the membranes may not be antibiofouling. Thus a passive strategy of antibiofouling has been employed by blending biocidal agents like GO and amine modified GO during melt mixing. The antibacterial mechanism and its effect on bacterial activity have been thoroughly studied. Chapter 5 focuses on modification of membrane by incorporating silver decorated GO in the bulk. The effect of incorporation of these particles and their effect on bacterial activity have been discussed systematically. Chapter 6 emphasizes on the surface coating of membrane with chitosan to enhance the antibacterial activity and antibiofouling. Chapter 7 focuses on the development of membrane with pore sizes that are larger than a bacterial cell. These membranes are grafted with antibacterial polymers like polyethylene imine (PEI) and Ag to achieve antibacterial and antibiofouling surface. The possible mechanism of bacterial inactivity is described and the leaching of Ag from the membranes has been discussed. Part II of the thesis focuses on the development of co-continuous morphology in PE/PEO blends and has been assessed using 3D tomography. Chapter 8 describes the development of co-continuous morphology in PE/PEO blend. 2D and 3D micrographs have been corroborated for understanding the morphology evolution during post processing operation like remelting or hot-pressing. The blend has been strategically compatibilized to arrest the morphology and retain the co-continuity in the blends. GO was anchored onto the surface of the membrane by rendering suitable surface active groups. The antibiofouling and bacterial inhibition was studied in detail. The effect of anchoring GO on the membrane surface has been discussed with respect to their membrane performance and its antibacterial activity. Chapter 9 discusses the development of membranes using PE based Ionomer (Surlyn) and PEO. The Ionomer provided active sites for reducing silver nitrate directly onto the surface of PE to render antibacterial surface which otherwise requires a two-step protocol in the case of inert PE. The effect of coating Ag on the membrane performance and its antibacterial activity is elaborated. Chapter 10 sums up the major conclusions from each chapter and highlights the outcome of the work.

碩士
國立成功大學
資源工程學系碩博士班
91
The traditional methods of surface area measurements are BET method (Branouer, Emmet and Teller method), EG method (Ethylene glycol method), EGME method (Ethylene glycol monoethyl ether method) and MB method (Methylene blue method). BET method has been recognized that it can not measure the total surface areas of expandable clays due to nitrogen does not interact with or have access to the interlayer surfaces. The surface area measurement result of EG, EGME methods are influenced by the species of exchangeable cation within clay. MB method has been used to measure surface area of clay in solution, still the result is influenced by CEC (Cation Exchange Capacity) of clays samples. The determination of surface areas of expandable clay by PEO (Polyethylene oxide) adsorption in aqueous solution is the main research topic in this study. Our discussion is focus on the feasibility of using ethylene oxide chain to determine the surface areas of expandable clay. Experimental results indicate that the ethylene oxide chain of PEO is coating on the interlamellar space of montmorillonite fully, which is composed predominately of a SiO2 (Si tetrahedral sheets) surface. Consequently, we can use the area of a single ethylene oxide chain unit to calculate the surface area of expandable clay. The surface areas of montmorillonite sample A, B, C, D determined by PEO adsorption method were 337 m2/g, 116 m2/g, 187 m2/g and 198 m2/g respectively. In this study, we also found that the surface areas of expandable clays in aqueous solution are related to particle size but not to CEC. Conclusively, we found that PEO adsorption is suitable way to measure the surface area expandable clays in solution.

The marked increase in surface-to-volume ratio associated with microscale devices for hemodialysis leads to problems with hemocompatibility and blood flow distribution that are more challenging to manage than those encountered at the conventional scale. In this work, stable surface modifications with pendant polyethylene oxide (PEO) chains were produced on polycarbonate microchannel and polyacrylonitrile membrane materials used in construction of microchannel hemodialyzer test articles. These coatings were evaluated in relation to protein repulsion, impact on urea permeability through the membrane, and impact on bubble retention through single-channel test articles. PEO layers were prepared by radiolytic grafting of PEO-PBD-PEO (PBD = polybutadiene) triblock copolymers to microchannel and membrane materials. Protein adsorption was detected by measurement of surface-bound enzyme activity following contact of uncoated and PEO-coated surfaces with ��-galactosidase. Protein adsorption was decreased on PEO-coated polycarbonate and polydimethyl siloxane (PDMS) materials by 80% when compared to the level recorded on uncoated materials. Protein adsorption on membrane materials was not decreased with PEO-PBD-PEO treatment; a PEI (polyethylene imide) layer exists on the AN69 ST membrane which is intended to trap heparin during membrane pre-treatment. It is still unclear how this PEI layer interacts with PEO-PBD-PEO. Neither the PEO-PBD-PEO triblocks nor the irradiation process was observed to have any effect on polyacrylonitrile membrane permeability to urea, nor did the presence of additional fibrinogen and bovine serum albumin (BSA) in the urea filtrate. The PEO-PBD-PEO treatment was not able to visibly reduce bubble retention during flow through single-channel polycarbonate test articles, however, the rough surfaces of the laser-etched polycarbonate microchannels may be causing this bubble retention. This surface treatment holds promise as a means for imparting safe, efficacious coatings to blood processing equipment that ensure good hemocompatibility and blood flow distribution, with no adverse effects on mass transfer.
Graduation date: 2013

A more quantitative understanding of peptide loading and release from polyethylene oxide (PEO) brush layers will provide direction for development of new strategies for drug storage and delivery. The antimicrobial peptide nisin shows potent activity against Gram-positive bacteria including the most prevalent implant-associated pathogens, its mechanism of action minimizes the opportunity for the rise of resistant bacteria and it does not appear to be toxic to humans, suggesting good potential for its use in antibacterial coatings for selected medical devices. In this work, optical waveguide lightmode spectroscopy was used to record changes in adsorbed mass during cyclic adsorption-elution experiments with nisin, at uncoated and PEO-coated surfaces. PEO layers were prepared by radiolytic grafting of Pluronic® surfactant F108 or F68 to silanized silica surfaces, producing long- or short-chain PEO layers, respectively. Kinetic patterns were interpreted with reference to a model accounting for history-dependent adsorption, in order to evaluate rate constants for nisin adsorption and desorption, as well as the effect of pendant PEO on the lateral clustering behavior of nisin. Lateral rearrangement and clustering of adsorbed nisin was apparent on uncoated and F68-coated surfaces, but not on F108-coated surfaces. In addition, nisin showed greater resistance to elution by peptide-free buffer from uncoated and F68-coated surfaces. These results are consistent with shorter PEO chains allowing for peptide adsorption to the base substrate in the case of F68-coated surfaces, while adsorption to the F108-coated surfaces is apparently governed by the presence of a hydrophobic core within the brush layer itself. Further, these results suggest that while peptide location within the hydrophobic core provides stability against lateral rearrangement, the pendant PEO chains themselves provide no steric barrier to nisin rearrangement within the brush layer.
Graduation date: 2012

Yes
Despite the abundant use of polyethylene oxides (PEOs) and their integration as an excipient in numerous pharmaceutical products, there have been no previous reports of applying this important thermoplastic polymer species alone to fused deposition modelling (FDM) 3D printing. In this work, we have investigated the manufacture of oral doses via FDM 3D printing by employing PEOs as a backbone polymer in combination with polyethylene glycol (PEG). Blends of PEO (molecular weight 100 K, 200 K, 300 K, 600 K or 900 K) with PEG 6 K (plasticiser) and a model drug (theophylline) were hot-melt extruded. The resultant filaments were used as a feed for FDM 3D printer to fabricate oral dosage forms (ODFs) with innovative designs. ODFs were designed in a radiator-like geometry with connected paralleled plates and inter-plate spacing of either 0.5, 1, 1.5 or 2 mm. X-ray diffraction patterns of the filaments revealed the presence of two distinctive peaks at 2θ = 7° and 12°, which can be correlated to the diffraction pattern of theophylline crystals. Blends of PEO and PEG yielded filaments of variable mechanically resistance (maximum load at break of 357, 608, 649, 882, 781 N for filament produced with PEO 100 K, 200 K, 300 K, 600 K or 900 K, respectively). Filaments of PEO at a molecular weight of 200–600 K were compatible with FDM 3D printing process. Further increase in PEO molecular weight resulted in elevated shear viscosity (>104 Pa.S) at the printing temperature and hindered material flow during FDM 3D printing process. A minimal spacing (1 mm) between parallel plates of the radiator-like design deemed essential to boost drug release from the structure. This is the first report of utilising this widely used biodegradable polymer species (PEOs and PEG) in FDM 3D printing.

Hydrophilic polymers in a swellable matrix tablet hydrate quickly to form a hydrogel layer on the exterior of the dosage once in contact with water or biologic fluid. The resultant hydrogel serves as a barrier to regulate water permeation into the matrix and drug diffusion from the preparation. It is therefore important to understand how the polymer is hydrated and what mechanism exists between hydrogel formation and drug dissolution from a swellable matrix tablet. In this thesis, a TA texture analyzer was utilized to monitor and characterize matrix swelling properties during dissolution process. Multiple regression models were employed to analyze the quantitative relationship between drug dissolution or hydrogel thickness and major formulation factors (polymer ratio, drug solubility). Modified release matrix tablets were prepared using four APIs with a range of aqueous solubility, i.e., acetaminophen (ACE), chlorpheniramine (CHL), ibuprofen (IBU), and pseudoephedrine hydrochloride (PSE). Two hydrophilic polymers, polyethylene oxide (PEO) and hydroxypropyl methylcellulose (HPMC) were selected and tested as primary matrix polymers for the formulations. It was found from the experiments that multiple regression model was capable of estimating drug dissolution for both PEO and HPMC matrix preparations. Based on major formulation factors the regression models provide satisfactory prediction of drug release, which could further aid in formulation development and optimization.

Nisin, an amphiphilic, antimicrobial peptide, has been shown to integrate into the hydrophobic inner region of poly(ethylene oxide) (PEO) brush layers; however, the presence of integrated nisin may compromise the protein repulsive character of the PEO layer. In particular, the introduction of fibrinogen to nisin-loaded brush layers has been observed to cause changes consistent with partial elution of nisin and/or location of fibrinogen at the interface. Questions surrounding the possibility of fibrinogen adsorption warrant further investigation, as the location of procoagulant proteins at a peptide-loaded PEO layer would significantly reduce the viability of a medical device coating based on such an approach. In this work, the preferential location of fibrinogen at PEO brush layers was investigated by: detection of FITC-labeled fibrinogen after sequential introduction of nisin and labeled fibrinogen; measurement of changes in the zeta potential of PEO coated and uncoated surfaces following nisin, fibrinogen, and/or buffer challenges; and evaluation of adsorption and elution kinetics in label-free, sequential adsorption experiments using optical waveguide lightmode spectroscopy (OWLS). PEO layers were constructed through radiolytic grafting of Pluronic�� F108 or F68 onto silanized silica surfaces producing long-chain or short-chain PEO layers, respectively. Adsorption results indicated that sequential introduction of nisin and fibrinogen to PEO brush layers, based on F108, does not result in fibrinogen adsorption beyond that expected for a nisin-free PEO layer. No evidence of nisin entrapment in fibrinogen-repellent F68 layers was recorded. Low-level fibrinogen adsorption observed at F68 layers following the introduction of nisin was determined to be a result of nisin adsorption at (uncoated) defect regions on the surface. In conclusion, retention of PEO layer capacity for protein repulsion after nisin entrapment is owing to a steric repulsive barrier provided by PEO segments extending beyond the level of entrapped nisin. It was then hypothesized that the immobilized, pendant PEO chains will inhibit exchange of entrapped nisin by competing proteins, and therefore prolong nisin activity retention. In order to evaluate nisin function following its entrapment, the antimicrobial activity of nisin-loaded, F108-coated silica surfaces was evaluated against the Gram-positive indicator strain, Pediococcus pentosaceous. The retained biological activity of these nisin-loaded layers was evaluated after incubation in the presence of bovine serum albumin (BSA), for contact periods up to one week. Surfaces were withdrawn at selected times and placed on plates inoculated with P. pentosaceous to measure kill zone radius in order to quantify nisin activity. In the presence of BSA, F108-coated surfaces retained more antimicrobial activity than the uncoated, hydrophobic surfaces. These results strongly suggest that PEO brush layers may serve as a viable drug storage platform due to the retained non-fouling character after bioactive peptide entrapment and the prolonged peptide activity in the presence of other proteins.
Graduation date: 2013

Yes
A study has been carried out to investigate controlled release performance of caplet shaped injection moulded (IM) amorphous solid dispersion (ASD) tablets based on the model drug AZD0837 and polyethylene oxide (PEO). The physical/chemical storage stability and release robustness of the IM tablets were characterized and compared to that of conventional extended release (ER) hydrophilic matrix tablets of the same raw materials and compositions manufactured via direct compression (DC). To gain an improved understanding of the release mechanisms, the dissolution of both the polymer and the drug were studied. Under conditions where the amount of dissolution media was limited, the controlled release ASD IM tablets demonstrated complete and synchronized release of both PEO and AZD0837 whereas the release of AZD0837 was found to be slower and incomplete from conventional direct compressed ER hydrophilic matrix tablets. Results clearly indicated that AZD0837 remained amorphous throughout the dissolution process and was maintained in a supersaturated state and hence kept stable with the aid of the polymeric carrier when released in a synchronized manner. In addition, it was found that the IM tablets were robust to variation in hydrodynamics of the environment and PEO molecular weight.
The research was funded by AstraZeneca, Sweden.