Добірка наукової літератури з теми "Polyester glass-Fiber powders"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Polyester glass-Fiber powders".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Polyester glass-Fiber powders":
K, Jaswanth. "Experimental Investigation and Analysis of Mechanical Properties of Chopped Strand Mat-E Glass Fiber Polyster Resin & Silica Powder Composites." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (April 25, 2024): 1–5. http://dx.doi.org/10.55041/ijsrem31612.
Kumar, V. Sravan. "Experimental Investigation and Analysis of Mechanical Properties of Chopped Strand Mat-E Glass Fiber Polyster Resin & Graphite Powder Composites." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (April 15, 2024): 1–5. http://dx.doi.org/10.55041/ijsrem30792.
Pathak, Govind, Om Prakash Dubey, and Prafful Kumar Manoharan. "MECHANICAL PROPERTIES OF SISAL/GLASS FIBER REINFORCED HYBRID COMPOSITES: A REVIEW." International Journal of Students' Research in Technology & Management 6, no. 2 (March 5, 2018): 70–76. http://dx.doi.org/10.18510/ijsrtm.2018.6210.
Allien, J. Vipin, Hemantha Kumar, and Vijay Desai. "Semi-active vibration control of MRF core PMC cantilever sandwich beams: Experimental study." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234, no. 4 (February 4, 2020): 574–85. http://dx.doi.org/10.1177/1464420720903078.
Herlina Sari, Nasmi, Salman, Suteja, Yusuf Akhyar Sutaryono, and Joni Iskandar. "Evaluation of the Impact Strength and Morphology Properties of Musa Acuminata Fiber Composite/CaCo3 Powder." Journal of Fibers and Polymer Composites 2, no. 1 (March 28, 2023): 18–28. http://dx.doi.org/10.55043/jfpc.v2i1.63.
Yamkamon, Pongpicha, Kiattisak Sritrakulchai, and Supphachan Rajsiri. "Recycling of Pre-Fabricated Carbon-Fiber Waste as Filler for Sandwich Glass-Fiber Auto Parts." Advanced Materials Research 1043 (October 2014): 85–90. http://dx.doi.org/10.4028/www.scientific.net/amr.1043.85.
Bağriaçik, Baki, Ahmet Beycioğlu, Szymon Topolinski, Emre Akmaz, Sedat Sert, and Esra Deniz Güner. "Assessment of glass fiber-reinforced polyester pipe powder in soil improvement." Frontiers of Structural and Civil Engineering 15, no. 3 (June 2021): 742–53. http://dx.doi.org/10.1007/s11709-021-0732-x.
Sonsakul, K., and W. Boongsood. "Effects of glass scraps powder and glass fiber on mechanical properties of polyester composites." IOP Conference Series: Materials Science and Engineering 273 (November 2017): 012006. http://dx.doi.org/10.1088/1757-899x/245/1/012006.
Sonsakul, K., and W. Boongsood. "Effects of glass scraps powder and glass fiber on mechanical properties of polyester composites." IOP Conference Series: Materials Science and Engineering 273 (November 2017): 012006. http://dx.doi.org/10.1088/1757-899x/273/1/012006.
Ait Tahar, Kamal, and R. Bahar. "Influence of the Dimensions of the Mesh of the Fiber Grid Reinforcement of Composite Materials." Key Engineering Materials 550 (April 2013): 9–16. http://dx.doi.org/10.4028/www.scientific.net/kem.550.9.
Дисертації з теми "Polyester glass-Fiber powders":
Daher, Jana. "Valorisation de sédiments de dragage et de terre excavée dans la formulation de matériaux de construction imprimables." Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Lille Douai, 2023. http://www.theses.fr/2023MTLD0002.
Concrete 3D Printing is one of the newest technologies in the field of construction. It offers advantages and opportunities over the traditional construction method, notably speed of construction and flexibility of architectural design. However, most printable materials used nowadays require a high cement content, the production of which generates significant CO2 emissions. Reducing the environmental impact of printable concrete is currently the focus of researchers who aim to use alternative materials to replace cement and reduce its high consumption in 3D printable mixes. This research work focuses on the valorization of alternative and innovative materials, currently considered as waste, in 3D printing, to develop printable mixtures with low environmental impact. The alternative materials used are dredged sediments, polyester glass-fiber powders and excavated soil. These materials are chosen for their recycling potential, their intrinsic properties, and the urgency of their management due to their large quantity. Moreover, little work is devoted to the recycling of these specific types of waste in concrete 3D printing, hence the objective of this thesis. An experimental methodology is therefore implemented to develop optimal mixtures. First, the extrudability and buildability are evaluated and verified in order to validate the printability of the developed mixes. Then, the fresh and hardened properties of the printable mortars are studied. Furthermore, in this research, different printing scales are tested, from the laboratory scale to the 3D printer scale. In the first part of the study, flash-calcined sediment is used in a printable control mixture, producing a binary binder (cement/flash-calcined sediment) and a ternary binder (cement/flash-calcined sediment/limestone filler), and polyester glass-fiber powders are used, as reinforcement, in the control mixture, substituting a portion of the sand. In the second part of the study, excavated soil is used as a total substitute for sand. The results of the first part of the study show that several mixtures containing flash-calcined sediment are printable. These mixtures contain 5 and 10% of sediment when used alone, and 10 and 20% of sediment when used with 20 and 30% of limestone filler, respectively. A cement substitution of 50% is therefore achieved with the printable mixture containing 20% of sediment and 30% of limestone filler. In addition, mixtures containing up to 10% of polyester glass-fiber powders are also printable. Furthermore, the results of the second part of the study show that formulations with a high content of excavated soil and a low cement content are printable and resistant. The printable formulations contain different amounts of soil, about 2, 4 and 6 times the amount of cement, with the most environmentally friendly formulation having a soil content of 1602 kg/m3 and a cement content of 282 kg/m3. This research work highlights the possibility of developing new ecological and resistant mixtures based on alternative materials that can be used in 3D printing construction applications
Частини книг з теми "Polyester glass-Fiber powders":
Mahesh Babu, S., and M. Venkateswara Rao. "Experimental Studies on the Effect of Basalt Powder Inclusion on Mechanical Properties of Hybrid Epoxy and Polyester Composites Reinforced with Glass Fiber." In Lecture Notes in Mechanical Engineering, 25–31. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6374-0_4.