Книги з теми "Plates (Engineering) Cracking Testing"

Finn, Scott R. Composite plates impact damage: An atlas. Lancaster, Pa: Technomic Pub. Co., 1991.

ASME Pressure Vessels and Piping Conference. (1988 Pittsburgh, Pa.). Advances in dynamic analysis of plates and shells - 1988: Presented at the 1988 ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988 : sponsored by the Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 1988.

Elmore, Lisa. Cracking the MCAS. New York: Random House, 2000.

Schra, L. Long-term outdoor stress corrosion testing of overaged 7000 series aluminium alloys. Amsterdam: National Aerospace Laboratory, 1988.

Pressure Vessels and Piping Conference (1986 Chicago, Ill.). Nonlinear analysis and NDE of composite material vessels and components: Presented at the 1986 Pressure Vessels and Piping Conference and Exhibition, Chicago, Illinois, July 20-24, 1986. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1986.

D, Kane R., ed. Slow strain rate testing for the evaluation of environmentally induced cracking: Research and engineering applications. Philadelphia: ASTM, 1993.

Laufenberg, Theodore. Creep testing of structural composite panels: A literature review and proposed standards. [Madison, Wis.?: Forest Products Laboratory, 1987.

Nemirovskiĭ, I︠U︡ V. Dinamicheskoe soprotivlenie ploskikh plasticheskikh pregrad. Novosibirsk: GEO, 2009.

Kane, RD, ed. Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1993. http://dx.doi.org/10.1520/stp1210-eb.

N, Kringos, Al-Qadi I, A. Loizos, and SpringerLink (Online service), eds. 7th RILEM International Conference on Cracking in Pavements: Mechanisms, Modeling, Testing, Detection and Prevention Case Histories. Dordrecht: Springer Netherlands, 2012.

Carper, Douglas M. Large deformation behavior of long shallow cylindrical composite panels. Hampton, Va: Langley Research Center, 1991.

Stein, Manuel. Postbuckling response of long thick plates loaded in compression including higher order transverse shearing effects. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Pressure Vessels and Piping Conference (1989 Honolulu, Hawaii). Composites and other new materials for PVP: Design and analysis considerations : presented at the 1989 ASME Pressure Vessels and Piping Conference, JSME co-sponsorship, Honolulu, Hawaii, July 23-27, 1989. Edited by Hui D and Nihon Kikai Gakkai. New York, N.Y: American Society of Mechanical Engineers, 1989.

Dynamics of pavement structures. London: E & FN Spon, 1994.

Hiser, A. L. Size effects on J-R curves for a 302-B plate. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1989.

Hiser, A. L. Size effects on J-R curves for a 302-B plate. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1989.

Assessment methodologies for preventing failure: Presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000. New York, N.Y: American Society of Mechanical Engineers, 2000.

Bamford, W. H., Wash.) Pressure Vessels and Piping Conference (2000 : Seattle, and F. Brust. Assessment Methodologies for Preventing Failure: Service Experience and Environmental Considerations (PVP). Amer Society of Mechanical, 2000.

Barry, Lisagor W., Crooker T. W, Leis B. N, American Society for Testing and Materials. Committee G-1 on Corrosion of Metals., ASTM Committee E-24 on Fracture Testing., ASTM Committee E-9 on Fatigue., and ASTM Symposium on Environmentally Assisted Cracking: Science and Engineering (1987 : Bal Harbour, Fla.), eds. Environmentally assisted cracking, science and engineering. Philadelphia, PA: ASTM, 1990.

Alexandrov, Sergey. Elastic/Plastic Discs Under Plane Stress Conditions. Springer, 2015.

Alexandrov, Sergey. Elastic/Plastic Discs under Plane Stress Conditions. Springer, 2015.

W, Roeder C., Washington (State). Dept. of Transportation., Washington State Transportation Center, and Washington State Transportation Commission, eds. Fatigue cracking of riveted, coped, stringer-to-floorbeam connections. Olympia, Wash: Washington State Dept. of Transportation, 2001.

Elmore, Lisa. Cracking the MCAS Grade 8 Science and Technology/Engineering (Princeton Review: Cracking the MCAS). Princeton Review, 2001.

R, Johnson Eric, Starnes James H, and United States. National Aeronautics and Space Administration., eds. Nonlinear response and failure characteristics of internally pressurized composite cylindrical panels. Blacksburg, VA: College of Engineering, Virginia Polytechnic Institute and State University, 1985.

Center, Langley Research, ed. Fracture testing of 2324-T39 aluminum alloy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Fracture testing of 2324-T39 aluminum alloy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Center, Langley Research, ed. Fracture testing of 2324-T39 aluminum alloy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

H, Frank Karl, National Research Council (U.S.). Transportation Research Board., American Association of State Highway and Transportation Officials., and United States. Federal Highway Administration., eds. Notch toughness variability in bridge steel plates. Washington, D.C: National Academy Press, 1993.

Lisagore, W. Barry, and Thomas W. Crooker. Environmentally Assisted Cracking: Science and Engineering/Stp 1049 (Astm Special Technical Publication// Stp). Astm Intl, 1990.

Co, Morrison-Knudsen Forest Products, Canadian Forestry Service, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Ring flaked maxi-chips: The manufacture, testing and evaluation of composite board made from Alberta woods. Edmonton, Alta: Canadian Forestry Service, 1988.

Stressed skin panels, FP 2.3.1. [Ottawa, Ont: Forestry Canada, 1988.

Alberta Research Council. Industrial Technologies Dept. Forest Products Program., Canadian Forestry Service, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Stressed skin panels: FP 2.3.1. Edmonton, Alta: Canadian Forestry Service, 1987.

Nahan, Matthew F. A nonlocal damage theory for laminated plate with application to aircraft damage tolerance. 1997.

Acoustic Emission and Related Non-Destructive Evaluation Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications. Elsevier Science & Technology, 2015.

Ohtsu, Masayasu. Acoustic Emission and Related Non-Destructive Evaluation Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications. Elsevier Science & Technology, 2020.

Alberta Research Council. Industrial Technologies Dept. Forest Products Program., Canadian Forestry Service, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Aspen vs. black poplar differences: Phase I, waferboard/OSB : FP 2.6.1. Edmonton, Alta: Canadian Forestry Service, 1987.

Daniel, Sydow P., Librescu Liviu, and Langley Research Center, eds. Postbuckling response of long thick plates loaded in compression including higher order transverse shearing effects. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Kane, Russell D. Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications (Astm Special Technical Publication// Stp). ASTM International, 1993.

Hui, D., T. J. Kozik, and G. E. O. Widera. Composites and Other New Materials for Pvp: Design and Analysis Considerations (Pvp, Vol 174). Amer Society of Mechanical, 1989.

Isocyanates (M.D.I.): FP 2.2.1. Edmonton, Alta: Canadian Forestry Service, 1987.

Isocyanates (M.D.I.) FP 2.2.1. [Ottawa, Ont: Forestry Canada, 1988.

Alberta Research Council. Industrial Technologies Dept. Forest Products Program., Canadian Forestry Service, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Machine stress rating panel products. Edmonton, Alta: Canadian Forestry Service, 1987.

Alberta Research Council. Industrial Technologies Dept. Forest Products Program., Canada Forestry Canada, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Machine stress rating panel products. [Ottawa, Ont: Forestry Canada, 1988.

(Editor), Alberto Carpinteri, and Giuseppe Lacidogna (Editor), eds. Earthquakes and Acoustic Emission: Selected Papers from the 11th International Conference on Fracture, Turin, Italy, March 20-25, 2005 (Balkema--Proceedings ... in Engineering, Water and Earth Sciences). CRC, 2007.

Lampman, Steve, ed. Weld Integrity and Performance. ASM International, 1997. http://dx.doi.org/10.31399/asm.tb.wip.9781627083591.

Menna, Todd J., ed. Characterization and Failure Analysis of Plastics. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v11b.9781627083959.