Дисертації з теми "Plastic optical fibre (POF)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-15 дисертацій для дослідження на тему "Plastic optical fibre (POF)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Brush, Ursula Jane. "Design and Validation of an Intensity-Based POF Bend Sensor Applications in Measuring Three-Dimensional Trunk Motion." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1269456459.
Повний текст джерелаNurgiyatna, Nurgiyatna. "Tomography imaging based on plastic optical fibre." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/tomography-imaging-based-on-plastic-optical-fibre(481b898a-b1dc-49ae-aa3f-3555a982bb75).html.
Повний текст джерелаIoannides, Nicos. "Novel opto-electronic and plastic optical fibre sensors." Thesis, London Metropolitan University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287610.
Повний текст джерелаWong, Yuen Mei. "Optimising the plastic optical fibre evanescent field biofilm sensor." Thesis, Liverpool John Moores University, 2008. http://researchonline.ljmu.ac.uk/5906/.
Повний текст джерелаThibodeau, Elisabeth Gabrielle. "Static and Fatigue Fracture Characterization of Primary and Secondary Bonded Woven E-Glass Composites." Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/ThibodeauEG2007.pdf.
Повний текст джерелаFifield, Samantha D. "Experimental Methodology for Embedding Fiber Optic Strain Sensors in Fiber Reinforced Composites Fabricated by the VARTM/SCRIMP Process." Fogler Library, University of Maine, 2002. http://www.library.umaine.edu/theses/pdf/FifieldSD2002.pdf.
Повний текст джерелаEl-Chiti, Fadi. "Experimental Variability of E-Glass Reinforced Vinyl Ester Composites Fabricated by VARTM/Scrimp." Fogler Library, University of Maine, 2005. http://www.library.umaine.edu/theses/pdf/El-ChitiF2005.pdf.
Повний текст джерелаLeitão, Cátia Sofia Jorge. "Optical fibre sensors as a non-invasive technology to the central arterial pressure assessment." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/21653.
Повний текст джерелаCom o presente trabalho pretendeu-se explorar soluções de fibra ótica na aquisição da onda de pulso na artéria carótida, para análise da sua morfologia e cálculo da pressão arterial central. Foram desenvolvidos três sistemas, dois baseados em redes de Bragg, gravadas em fibra de sílica, e outro em modulação de intensidade, usando fibra ótica de plástico. O primeiro sensor foi desenvolvido com o objetivo de testar a exequibilidade da utilização de fibra ótica nesta aplicação. Após resultados promissores da sua caracterização e testes em sujeitos, o desenvolvimento dos dois sensores consequentes teve por objetivo o aumento da sensibilidade e facilidade de utilização das sondas, pela melhoria da sua forma, portabilidade e autonomia. A solução baseada em intensidade mostrou-se ainda como um sistema que coligava desempenho a baixo custo, tendo por isso sido submetida a um estudo pré-clínico, comparando o seu desempenho ao de um dispositivo comercial, de natureza eletromecânica, numa pequena coorte de indivíduos saudáveis. Este estudo teve como objetivo investigar a correlação dos resultados obtidos com a sonda de fibra ótica e o dispositivo comercial. Tendo-se obtido uma correlação muito forte entre as duas técnicas, o dispositivo foi proposto para avaliação clínica. O desempenho da sonda foi assim comparado a um dispositivo comercial, numa coorte de indivíduos hipertensos. Foram também levados a cabo testes invasivos, usando como referência ondas de pressão obtidas no lúmen da artéria aorta em contexto de cateterismo cardíaco. Em ambos os estudos clínicos foram obtidos coeficientes de correlação muito fortes e diferenças de pressão média na gama obtida para dispositivos comerciais. Conclui-se assim que o dispositivo baseado em modulação de intensidade surge como uma promissora alternativa de baixo custo aos dispositivos eletromecânicos de avaliação de pressão arterial central disponíveis no mercado.
The present study aimed to explore fibre optic solutions in the acquisition of the pulse wave in the carotid artery, to its morphology analysis and central arterial pressure calculation. Three systems were developed, two based on Bragg gratings, engraved in silica fibre, and another on intensity modulation, using plastic optical fibre. The first sensor was developed in order to test the feasibility of the fibre optics use in this application. After promising results in the characterization and small tests in subjects, the development of the consequent two sensors had as main goals increasing the probes sensitivity and user-friendliness, by improving its shape, portability and autonomy. The intensity-based solution proved to be the system that best combined performance to low cost, and thus was subjected to a pre-clinical study, comparing its performance to a commercial device in a small cohort of healthy individuals. This study aimed to investigate the correlation between the results obtained with the fibre optic probe and the commercial device. Having been obtained a very strong correlation between the two techniques, the device was proposed for clinical evaluation. The probe’s performance was therefore compared to a non-invasive commercial device, in a cohort of hypertensive individuals. Invasive testing was also performed, using as reference pressure waves obtained in the lumen of the aortic artery in cardiac catheterization context. In both trials very strong correlation coefficients were obtained, as well as medium pressure differences in the range verified for commercial devices. It is concluded that the device based on intensity modulation arises as promising low cost alternative to central arterial pressure assessment electromechanical devices available in the market.
Okonkwo, Igweani Uchenna Titus. "Optical fiber transmission systems for in-door next generation broadband access network." Thesis, Brunel University, 2014. http://bura.brunel.ac.uk/handle/2438/10539.
Повний текст джерелаStevens, Renaud. "Modulation Properties of Vertical Cavity Light Emitters." Doctoral thesis, Stockholm : Tekniska högsk, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3240.
Повний текст джерелаLiang, Shijie. "Photonic structures fabricated in polymer materials using femtosecond laser irradiation." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/photonic-structures-fabricated-in-polymer-materials-using-femtosecond-laser-irradiation(cf1a7c56-9d66-44e4-9b18-0641445a2661).html.
Повний текст джерелаCorreia, Sandra Filipa Henriques. "Organic-inorganic hybrid materials for green photonics: luminescent solar concentrators." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/17407.
Повний текст джерелаLuminescent solar concentrators are inexpensive devices that aim to increase the efficiency of photovoltaic cells and promote the urban integration of photovoltaic devices, with unprecedented possibilities of energy harvesting through the façade of buildings, urban furniture or wearable fabrics. Generally, they consist of a transparent matrix coated or doped with active optical centres that absorb the incident solar radiation, which is re-emitted at a specific wavelength and transferred by total internal reflection to the edges where the photovoltaic cells are located. The main objective of this work is the production of luminescent solar concentrators whose optically active layer is based on organic-inorganic hybrid materials doped with europium ions or organic dyes, in particular, Rhodamine 6G and Rhodamine 800. Rhodamine 800, as opposed to europium ions and Rhodamine 6G which emit in the visible range, emits in the near infrared (NIR) range, which is an advantage for crystalline Si-based photovoltaic cells, whose efficiency is greater in the NIR. In this work, although the luminescent solar concentrators with planar geometry are addressed, the main focus is the use cylindrical geometry. The use of this type of geometry allows the effect of concentration to be higher relative to the planar geometry, since the ratio between the exposed area and the area of the edges is increased. The cylindrical geometry is exploited by producing luminescent solar concentrators based on polymer optical fibre (plastic) where the optically active layer is on the outside (as a coating) or inside (as a filling in the hollow core) of the optical fibre. Furthermore, the possibility of increasing the exposed area was also dealt with the production of bundles of luminescent solar concentrators in which the plastic optical fibres are placed side by side and, also, by fabricating luminescent solar concentrators with length in the metre scale.
Os concentradores solares luminescentes são dispositivos de baixo custo que têm como objetivo aumentar a eficiência de células fotovoltaicas e promover a integração de dispositivos fotovoltaicos em elementos do dia-a-dia, tornando possível a captura de energia solar, através da fachada de edifícios, mobiliário urbano ou em têxteis. Geralmente, consistem numa matriz transparente coberta ou dopada com centros óticos ativos, capazes de absorver a radiação solar incidente e reemiti-la com um comprimento de onda específico que será transportada, através de reflexão interna total, para as extremidades da matriz onde se encontra(m) a(s) célula(s) fotovoltaica(s). O principal objetivo deste trabalho consiste na produção de concentradores solares luminescentes cuja camada ótica ativa é baseada em materiais híbridos orgânicos-inorgânicos dopados com iões lantanídeos (európio, Eu3+) ou corantes orgânicos, nomeadamente, Rodamina 6G e Rodamina 800. A Rodamina 800, ao contrário dos iões de európio e da Rodamina 6G que emitem na gama do visível, emite na região espetral do infravermelho próximo (NIR), que se revela uma vantagem quando a célula fotovoltaica em uso é composta de silício cristalino, cuja gama de maior eficiência é no NIR. Neste trabalho, apesar de serem abordados concentradores solares luminescentes com geometria planar, o principal foco é a utilização da geometria cilíndrica. Este tipo de geometria permite que o efeito de concentração seja superior, relativamente à geometria planar, uma vez que a razão entre a área exposta e a área das extremidades é aumentada. A geometria cilíndrica é explorada, através da produção de concentradores solares luminescentes com base em fibra ótica polimérica (plástica) em que a camada ótica ativa se encontra no exterior (como um revestimento) ou no interior (como um preenchimento do núcleo oco). Além disso, a possibilidade de aumentar a área exposta foi, também, abordada com o fabrico de uma matriz de concentradores solares luminescentes colocados lado a lado e, também, com o fabrico de concentradores solares luminescentes na escala do metro.
Dong, Yunzhi. "A High-speed Fiber-optic Receiver for Plastic Optical Fiber Applications in 65 nm CMOS process." Thesis, 2012. http://hdl.handle.net/1807/33978.
Повний текст джерелаSequeira, Filipa da Rosa Carvalhal. "Intensity based POF sensors for water quality assessment." Doctoral thesis, 2020. http://hdl.handle.net/10773/28938.
Повний текст джерелаHoje em dia há uma necessidade de soluções simples e de baixo custo para a avaliação da qualidade de águas e que permitam a monitorização remota de contaminantes, no local e em tempo real. As tecnologias baseadas em POF podem oferecer essa possibilidade através de sistemas de interrogação óptica adequados, combinados com camadas sensíveis especialmente desenvolvidas para detecção química. As plataformas ópticas baseadas em POF foram desenvolvidas e caracterizadas com soluções aquosas com diferentes índices de refracção. Os sensores foram optimizados através da variação do comprimento e/ou rugosidade da região sensível. A capacidade de detecção química das plataformas ópticas desenvolvidas foi avaliada através do revestimento com camadas sensíveis, nomeadamente polímeros molecularmente impressos (PMI), utilizando diferentes técnicas de deposição. A dependência da imobilização de proteínas na superfície de POFs modificadas foi avaliada com o objectivo de desenvolver biossensores para detecção química. Um sensor POF para detecção química, em configuração D-shape, foi desenvolvido com sucesso através do revestimento com um PMI, permitindo a detecção de perfluorooctanoato (POFA/PFO-) em soluções aquosas com um limite de detecção entre 0.20 – 0.28 ppb. A colaboração com investigadores de diferentes áreas foi essencial para o sucesso do trabalho desenvolvido.
Programa Doutoral em Engenharia Física
Frias, Ana Rita da Silva Rocha. "High performance luminescent solar concentrators for flexible waveguiding photovoltaics." Doctoral thesis, 2019. http://hdl.handle.net/10773/29231.
Повний текст джерелаO desfasamento entre o espetro AM1.5G e o espetro de absorção das células fotovoltaicas é um fator crítico que limita o desempenho das mesmas. De forma a ultrapassar isto, diversas aproximações têm sido propostas. Entre elas, têm sido enfatizadas as camadas luminescentes por desvio descendente de energia, dispositivos capazes de melhorar o desempenho em condições de operação específicas, e os concentradores solares luminescentes, considerados uma tecnologia complementar a das células fotovoltaicas para utilização em ambientes urbanos. As camadas luminescentes por desvio descendente de energia são revestimentos diretamente depositados no topo de células fotovoltaicas capazes de absorver a radiação incidente complementar à que as células fotovoltaicas absorvem e subsequentemente reemitem-na com um comprimento de onda específico que é refratado/refletido até à célula fotovoltaica. Os concentradores solares são dispositivos compostos por uma matriz transparente incorporando centros óticos ativos que absorbem a radiação incidente, que é posteriormente reemitida com um comprimento de onda específico e transportada por reflexão interna total até à célula fotovoltaica localizada nas extremidades da matriz. Esta configuração permite a produção de dispositivos fotovoltaicos embebidos em fachadas de edifícios e janelas, permitindo que estes sejam transformados em unidades de produção de energia, contribuindo para o desenvolvimento de edifícios de energia zero. O principal objetivo deste trabalho consiste no fabrico e caracterização de híbridos orgânicos-inorgânicos com espessura e índice de refração controlados utilizando polimetil-metacrilato, di- e tri-ureasil incorporando diferentes iões lantanídeos, nomeadamente Tb3+, Eu3+, Yb3+ and Nd3+, e corantes orgânicos como Rodamina 6G, Rodamina 800, Silício 2,3-naftalocianina bis(trietil siloxano), clorofila e R-ficoeritrina cuja emissão varia entre o visível e o infravermelho próximo. Concentradores solares luminescentes com geometria planares e cilíndrica foram estudados. A geometria cilíndrica permite que o efeito de concentração seja superior, quando comparado com a geometria planar, uma vez que a razão entre a área exposta e a área das extremidades aumenta. A geometria cilíndrica é explorada, através da produção de concentradores solares luminescentes em fibra ótica de plástico onde a camada ótica ativa se encontra no interior da fibra, como um preenchimento do núcleo oco. A possibilidade de aumentar a área exposta foi, também, abordada através do fabrico de uma matriz de concentradores solares luminescentes colocados lado a lado com diferentes geometrias da bainha. Para além disso, as propriedades óticas dos corantes orgânicos naturais, que têm sido pouco exploradas na literatura, foram alvo de estudo através da incorporação de moléculas de clorofila e de R-ficoeritrina como centros óticos em concentradores solares luminescentes. Os resultados experimentais mais relevantes foram validados através de simulações baseadas no método de Monte-Carlo.
Programa Doutoral em Física