Дисертації з теми "Plant Operator"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Plant Operator".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Billing, P. J. "Computer simulation of plant operation for use in process operator training." Thesis, University of Bath, 1988. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.760584.
Повний текст джерелаDang, Vinh Ngoc. "Modeling operator cognition for accident sequence analysis : development of an operator-plant simulation." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/10885.
Повний текст джерелаCabahug, Ruel R. "A profile for classifying plant operator maintenance proficiency." Thesis, Loughborough University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.289580.
Повний текст джерелаD'Angelo, Elizabeth Marcela Alonso. "Software requirements for a nuclear plant operator advisor, the SIPO case study." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq29237.pdf.
Повний текст джерелаDeVita-Cochrane, Cynthia Catherine. "Personality Factors and Nuclear Power Plant Operators: Initial License Success." ScholarWorks, 2015. https://scholarworks.waldenu.edu/dissertations/1884.
Повний текст джерелаWidiputri, Diah Indriani. "Incorporating human factors into process plant lifecycle." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2011. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-74469.
Повний текст джерелаSchwere Unfälle in der Prozessindustrie erfolgen meist aus einem Zusammenspiel mehrerer verschiedener Fehler und der gleichzeitigen Wechselwirkung mit falschem menschlichem Handeln. Dabei sind diese Fehlhandlungen nicht als Unfallursache anzusehen, sondern sie resultieren aus Fehlern, die in dem System selbst zu finden sind. Aus diesem Grund kann bei der Sicherheitsanalyse die technische Analyse nicht unabhängig von der Betrachtung des Human Factors (HF) durchgeführt werden. Um eine Reduzierung der Fehlhandlungen zu erreichen, müssen das Anlagendesign, die Bedienbarkeit und die Arbeitsumgebung an die menschlichen Fähigkeiten angepasst werden. Human Factors (HF) betrachtet die Interaktion zwischen menschlichen, technischen und organisatorischen Aspekten einer Anlage, mit dem Ziel die Sicherheit und Effektivität der Anlage zu optimieren. Dafür ist eine Einbindung von HF in den gesamten Lebenszyklus einer Anlage notwendig. So müssen HF- Analysen nicht nur während des Betriebs einer Anlage und bei Prozessmodifikationen durchgeführt werden, sondern auch während des gesamten Design- Prozesses, da gerade in den frühen Design-Phasen das Optimierungspotential besonders hoch ist. Eine solche Analysemethode muss alle Aufgaben eines Operators erfassen, so dass zwischen manueller Arbeit und der Arbeit in der Leitwarte unterschieden werden muss. In dieser Arbeit wurden Analysentechniken entwickelt, die einen systematischen Ansatz zur Berücksichtigung des HF über den gesamten Lebenszyklus einer verfahrenstechnischen Anlage darstellen. Mit Hilfe der neuen Analysemethode, PITOPA-Design, können Untersuchungen sowohl während der Designphase als auch während des Betriebs einer Anlage durchgeführt werden. Da solche HF-Analyse immer in Verbindung mit einer klassischen Sicherheitsanalyse erfolgen muss, bindet die neue Methode die HAZOP-Analyse direkt ein. Darüber hinaus wurde ein weiterer Ansatz für die Analyse von Operatorhandlungen in einer Messwartenarbeit entwickelt. Diese neue Analysentechnik, PITOPA-CR, bildet die Grundlage für Verbesserungen im Alarmsystem und wird in das Alarmmanagementsystem eingebunden. Die Arbeit ist wie folgt strukturiert: i) Entwicklung von HAZOPA (the Hazards and Operator Actions Analysis). Diese Methode stellt die Einbindung der HF-Analyse in HAZOP dar. ii) Entwicklung von PITOPA-Design, zur HF-Analyse während des gesamten Designprozesses einer verfahrenstechnischen Anlage. Die Methode wurde in 3 Teile eingeteilt, um die drei Designsphasen Conceptual-, Basic-, und Detail-Design zu erfassen. iii) Entwicklung von PITOPA-CR, zur HF-Analyse in der Messwarte. iv) Einbindung von PITOPA-CR in das Alarmmanagementsystem und Entwicklung einer Technik zur Alarmpriorisierung
Lee, Ji Hyun. "Development of a Tool to Assist the Nuclear Power Plant Operator in Declaring a State of Emergency Based on the Use of Dynamic Event Trees and Deep Learning Tools." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1543069550674204.
Повний текст джерелаMubeen, Faizalam Junaid. "The bounded H∞ calculus for sectorial, strip-type and half-plane operators." Thesis, University of Oxford, 2011. https://ora.ox.ac.uk/objects/uuid:6bff352d-f858-492a-a00b-3a3dd2049b5c.
Повний текст джерелаDoležal, Tomáš. "Business Plan: The Development and Operation of Biomass Power Plant." Master's thesis, Vysoká škola ekonomická v Praze, 2012. http://www.nusl.cz/ntk/nusl-125031.
Повний текст джерелаOnyenanu, Tochukwu Emmanuel. "An improved maintenance management strategy for gas field equipment in Escravos gas–to–liquid plant, Nigeria / T.E. Onyenanu." Thesis, North-West University, 2010. http://hdl.handle.net/10394/4894.
Повний текст джерелаThesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2011.
Rosso, Stefano. "Power Plant Operation Optimization Economic dispatch of combined cycle power plants." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264350.
Повний текст джерелаNär elproduktionen från förnybara källor ökar krävs högre flexibilitet av fossil bränsleproduktion för att hantera fluktuationerna från sol- och vindkraft. Detta resulterar i kortare driftscykler och brantare ramper för turbinerna och mer osäkerhet för operatörerna. Detta avhandlingsarbete tillämpar matematisk optimering och statistisk inlärning för att förbättra det ekonomiska utnyttjandet av en kombicykel i ett kraftverk som består av två separata block med två gasturbiner och en ångturbin. Målet är att minimera bränsleförbrukningen hos gasturbinerna samtidigt som man tar hänsyn till en serie av villkor relaterade till efterfrågan som anläggningen står inför, kraftproduktionsbegränsningar etc. Detta uppnås genom skapandet av en matematisk modell för anläggningen som reglerar hur anläggningen kan fungera. Modellen är sedan optimerad för minsta möjliga bränsleförbrukning. Maskinteknik har använts på sensor data från själva anläggningen för att realistiskt simulera turbinernas beteende. In och utdata kurvor har erhållits för kraftproduktion och avgasvärmeproduktion med hjälp av ordinary least squares (OLS) med månads data och med en tio minuters samplingshastighet. Modellen är korsvaliderad och bevisad statistiskt giltig. Optimeringsproblemet formuleras genom en generaliserad disjunktiv programmering i form av ett mixed-integer linear problem (MILP) och löses med hjälp av en Branch-and-Bound algoritm. Resultatet från modellen är en veckas värden, med femton minuters intervall, totalt i två månader. Lägre bränsleförbrukning uppnås med hjälp av optimeringsmodellen, med en vecka minskad bränsleförbrukning i intervallet 2-4%. En känslighetsanalys och en korrelationsmatris används för att visa efterfrågan och den maximala tillgängliga kapaciteten som kritiska parametrar. Resultaten visar att de mest effektiva maskinerna (alternativt de med högsta tillgängliga kapacitet) bör drivas med maximal belastning medan de fortfarande strävar efter ett effektivt utnyttjande av avgaserna.
Hansson, Erik. "Temporal Task and Motion Plans: Planning and Plan Repair : Repairing Temporal Task and Motion Plans Using Replanning with Temporal Macro Operators." Thesis, Linköpings universitet, Artificiell intelligens och integrerade datorsystem, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-152722.
Повний текст джерелаHassan, Mohamed Elhafiz. "Power Plant Operation Optimization : Unit Commitment of Combined Cycle Power Plants Using Machine Learning and MILP." Thesis, mohamed-ahmed@siemens.com, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-395304.
Повний текст джерелаSuryana, Rahmat [Verfasser]. "Optimal Operation of Wind Power Plants with Doubly-fed Induction Generators under Considerations to Network Operator Regulations / Rahmat Suryana." Aachen : Shaker, 2017. http://d-nb.info/1138177636/34.
Повний текст джерелаEftekhari, M. M. "Optimal operation of an air-conditioning plant." Thesis, University of Oxford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234946.
Повний текст джерелаTsang, Chi-fai Ringo, and 曾志輝. "Operation reengineering in a medium-sized plant." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31266848.
Повний текст джерелаTsang, Chi-fai Ringo. "Operation reengineering in a medium-sized plant /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14708863.
Повний текст джерелаHan, L. Y. "Design strategy for flexible operation of process plant." Thesis, University of Leeds, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379242.
Повний текст джерелаVasilyev, Vladimir. "Invertibility of a Class of Toeplitz Operators over the Half Plane." Doctoral thesis, Universitätsbibliothek Chemnitz, 2007. http://nbn-resolving.de/urn:nbn:de:swb:ch1-200700157.
Повний текст джерелаMartins, Ana Virginia Feitosa. "COST HEALTH PLAN OPERATORS MANAGEMENT:CASE STUDY." Universidade Federal do CearÃ, 2009. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=16661.
Повний текст джерелаO serviÃo pÃblico de saÃde do Brasil fornece um atendimento precÃrio e nÃo eficaz à populaÃÃo, que, em muitos casos, opta pelos planos privados de saÃde. O setor à regulamentado pela AgÃncia Nacional de SaÃde que impÃe normas rÃgidas para o funcionamento das operadoras, aumentando as exigÃncias quanto ao nÃmero de procedimentos obrigatÃrios pelos planos, mas os reajustes das mensalidades, quando liberados, nÃo acompanham o crescimento dos custos. Com o intuito de investigar que estratÃgias poderÃo contribuir para a reduÃÃo de custos em operadoras de planos de saÃde, mantendo ou mesmo melhorando a qualidade dos serviÃos, dentro de uma metodologia qualitativa de estudo de casos Ãnico, o instrumento de coleta de dados e entrevista semiestruturada, alÃm da pesquisa bibliogrÃfica e documental. A anÃlise dos indicadores do estudo aponta que as estratÃgias principais para a reduÃÃo de custos das operadoras sÃo a utilizaÃÃo da Medicina preventiva terciÃria, denominada Home care, bem como a coparticipaÃÃo dos usuÃrios, com valores somados Ãs mensalidades, quando utilizam exames e consultas. Pode-se concluir que a anÃlise das estratÃgias aplicadas a operadoras de planos de saÃde, com resultados positivos, à um importante instrumento gerencial.
Georgiadis, Michael. "Advanced optimisation of batch plant design and operation." Thesis, Imperial College London, 1998. http://hdl.handle.net/10044/1/7394.
Повний текст джерелаSohel, Mohammed Imroz. "Thermodynamic Modelling and Simulation for High Efficiency Design and Operation of Geothermal Power Plants." Thesis, University of Canterbury. Mechanical Engineering, 2011. http://hdl.handle.net/10092/5292.
Повний текст джерелаBergan, Marius. "The design and evaluation of multimedia user interfaces in process control." Thesis, University of Strathclyde, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321183.
Повний текст джерелаLuo, Gang. "Development of a Digital Desk for Power Plant Control Room Operators." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-62353.
Повний текст джерелаSpelling, James. "Steam Turbine Optimisation for Solar Thermal Power Plant Operation." Licentiate thesis, KTH, Kraft- och värmeteknologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-35386.
Повний текст джерелаHållbar energiförsörjning är för närvarande en av de viktigaste frågorna för mänskligheten. Socialt och ekonomiskt välstånd är starkt kopplat till rimliga energipriser och hållbar energiproduktion. Koncentrerad solenergi är nu etablerad som en tillförlitlig källa av förnybar energi och är också ett ekonomiskt attraktivt alternativ. Koncentrerade solenergikraftverk bygger till stor del på konventionella Rankine-cykel elgeneratorer, vilka minskar de tekniskt relaterade riskerna i den initiala investeringen. På grund av solstrålningens skiftande karaktär utsätts denna utrustning för mer varierade driftsförhållanden, jämfört med konventionella system. Behovet av att bibehålla den operativa livslängden på ångturbiner sätter gränser för uppstartshastigheten. För att utnyttja så mycket som möjligt av solens energi bör ångturbinen startas så snabbt som möjligt när solstrålningen blir tillgänglig. Eftersom temperaturen i metalldelar hos turbinerna är den begränsande faktorn, har metoder studerats för att hålla turbinerna så varma som möjligt under tomgångsperioder. En detaljerad modell av ångturbiner i ett solenergikraftverk har utvecklats och validerats mot experimentella data från ett befintligt kraftverk. En dynamisk systemmodell av de övriga delarna av anläggningen har också utvecklats för att ge input till ångturbinsmodellen. Tre modifieringar som potentiellt kan bidra till att upprätthålla den inre temperaturen i ångturbiner har analyserats: montering av ytterligare isolering, ökning av temperaturen hos glänsångan och användning av elvärmefiltar. En kombination av elvärmefiltar och en temperaturökning av glänsångan visade sig vara det mest effektiva alternativet. Åtgärderna resulterade i en ökad elproduktion på upp till 3%, beräknat på årsbasis genom ökad tillgänglighet hos kraftverket.
QC 20110629
TURBOKRAFT
Tangås, Cecilie Magrethe. "Methods for providing heat to electric operated LNG plant." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11094.
Повний текст джерелаChukanova, E. "Modelling of screw compressor plant operation under intermittent conditions." Thesis, City, University of London, 2016. http://openaccess.city.ac.uk/15825/.
Повний текст джерелаWilliams, Christopher Michael S. M. Massachusetts Institute of Technology. "The effects of variable operation on RO plant performance." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68958.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 113-117).
Optimizations of reverse osmosis (RO) plants typically consider steady state operation of the plant. RO plants are subject to transient factors that may make it beneficial to produce more water at one time than at another. These factors can impact the optimal size of the plant. The electricity price is one factor of importance. When long periods of time are considered, other factors such as weather and seasonal water demand can influence the operation and size as well. With long-term operation, water storage is possibile. This thesis investigates the optimal time-varying operation and size of a single stage RO plant subject to a time-varying electricity price. A single stage RO model is modified to include a variable plant size controlled by the number of modules. The annual capital and operating expenses of the plant are calculated in an RO economics sub-model. In one study, the short-term (single day) operation and design are optimized to minimize the total annualized cost of the plant. The operation and size are optimized for four different electricity price functions: constant, moderately fluctuating, highly fluctuating, and actual electricity prices. The results show that significant savings (1-7%) are obtainable and optimal oversizing of 15% is chosen for the fluctuating electricity price functions considered therein. The plant produces more water when electricity is cheap, and shuts off during periods of high electricity price when oversized. The size and day-by-day operation are optimized for one year subject to Spain's electricity price. Little savings and oversizing are obtainable for the day-by-day optimization due to low fluctuations in the electricity price during the year. In a second study, the long-term (one year) operation with storage of product water is optimized to minimize the cumulative cost of reclaiming the water from the reservoir and/or of the electricity. The operation is optimized for electricity prices for California, Cyprus, Greece and Spain for 2010. Low savings are obtained with variable operation. Shutting off is not chosen in the optimal operation and 1% oversizing typically leads to increased costs. Lower electricity prices with more fluctuations result in better savings. Product water is stored during the winter.
by Christopher Michael Williams.
S.M.
Mishra, Brahmdatt. "Optimal operation of multiproduct batch plants." [S.l.] : [s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=981974562.
Повний текст джерелаVasil'ev, Vladimir A. "Invertibility of a class of Toeplitz operators over the half plane." [S.l. : s.n.], 2007.
Знайти повний текст джерелаZhao, Yongjun. "An Integrated Framework for Gas Turbine Based Power Plant Operational Modeling and Optimization." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/10580.
Повний текст джерелаChen, Hongmei. "A Multiscale Forecasting Methodology for Power Plant Fleet Management." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6849.
Повний текст джерелаDvorak, Gary John. "Economic analysis of irrigation pumping plants." Thesis, Kansas State University, 1985. http://hdl.handle.net/2097/9834.
Повний текст джерелаAmba, Harsha Vardhan. "Operation and Monitoring of Parabolic Trough Concentrated Solar Power Plant." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5891.
Повний текст джерелаStreckienė, Giedrė. "Research of Heat Storage Tank Operation Modes in Cogeneration Plant." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2011. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2011~D_20110621_170138-31454.
Повний текст джерелаDisertacijoje nagrinėjami būdingi šilumos akumuliacinės talpos veikimo režimai, susiformuojantys nedidelės galios kogeneracinėje jėgainėje, tiriamas šiluminės stratifikacijos susidarymas tokioje talpoje ir atliekamas jos modeliavimas. Pagrindinis disertacijos tikslas – ištirti nedidelės galios kogeneracinės jėgainės šilumos akumuliacinės talpos veikimo režimų ypatumus, sudaryti algoritmą, padedantį parinkti tokios talpos tūrį ir pateikti modelį, leidžiantį nustatyti šiluminę stratifikaciją akumuliacinėje talpoje bet kuriuo jos veikimo metu.
Prasad, Girijesh. "Performance monitoring and control for economical fossil power plant operation." Thesis, Queen's University Belfast, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264537.
Повний текст джерелаGillie, Mary. "Operation and regulation of a 'virtual wind/gas' power plant." Thesis, University of Strathclyde, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405322.
Повний текст джерелаAryana, Shahla. "Advanced operation and optimisation of an industrial ethylene oxide plant." Connect to full text, 2008. http://ses.library.usyd.edu.au/handle/2123/5402.
Повний текст джерелаIncludes graphs and tables. Title from title screen (viewed November 06, 2009). Submitted in fulfilment of the requirements for the degree of Doctor of Philosophy to the Faculty of Engineering and Information Technologies. Degree awarded 2009; thesis submitted 2008. Includes bibliographical references. Also available in print form.
Chittratanawat, Sarawoot. "Operation based facilities design /." free to MU campus, to others for purchase, 2001. http://wwwlib.umi.com/cr/mo/fullcit?p3025611.
Повний текст джерелаViana, Andson de Freitas. "A study on the insolvency of operators health plans." Universidade Federal do CearÃ, 2012. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=8308.
Повний текст джерелаNa dÃcada de 1990 ocorreram diversas transformaÃÃes no setor de saÃde no Brasil, sendo uma das mais importantes, a alteraÃÃo da Lei que regula as operadoras de planos e seguros para os riscos à saÃde dos indivÃduos. Este setor vem se tornando cada vez mais concentrado com uma saÃda maior que a entrada de novas empresas. à importante investigar, neste caso, que fatores contribuem para que uma operadora de plano nÃo se sustente no mercado. Quais sÃo os sinais (variÃveis) visÃveis na contabilidade destas que antecipam a insolvÃncia? Para responder esta questÃo, esta dissertaÃÃo utiliza-se de um modelo Logit multivariado para a probabilidade de insolvÃncia, onde os principais cofatores sÃo indicadores financeiros das empresas retiradas da base de dados mais atualizada da AgÃncia Nacional de SaÃde Suplementar. AlÃm destes indicadores, tambÃm foi investigado se o tipo de operadora de plano de saÃde ou o local de atuaÃÃo da mesma tambÃm podem contribuir para o risco de insolvÃncia. Como resultado verificou-se que o tipo de operadora e a regiÃo de atuaÃÃo de cada uma nÃo tÃm correlaÃÃo quanto ao nÃvel de insolvÃncias das OPS. De maneira esperada os indicadores econÃmicos financeiros de endividamento (CT/CP e ENDIV) e de recebimento (PMCR) foram os mais importantes na previsÃo de insolvÃncia das empresas em um perÃodo subsequente.
Na dÃcada de 1990 ocorreram diversas transformaÃÃes no setor de saÃde no Brasil, sendo uma das mais importantes, a alteraÃÃo da Lei que regula as operadoras de planos e seguros para os riscos à saÃde dos indivÃduos. Este setor vem se tornando cada vez mais concentrado com uma saÃda maior que a entrada de novas empresas. à importante investigar, neste caso, que fatores contribuem para que uma operadora de plano nÃo se sustente no mercado. Quais sÃo os sinais (variÃveis) visÃveis na contabilidade destas que antecipam a insolvÃncia? Para responder esta questÃo, esta dissertaÃÃo utiliza-se de um modelo Logit multivariado para a probabilidade de insolvÃncia, onde os principais cofatores sÃo indicadores financeiros das empresas retiradas da base de dados mais atualizada da AgÃncia Nacional de SaÃde Suplementar. AlÃm destes indicadores, tambÃm foi investigado se o tipo de operadora de plano de saÃde ou o local de atuaÃÃo da mesma tambÃm podem contribuir para o risco de insolvÃncia. Como resultado verificou-se que o tipo de operadora e a regiÃo de atuaÃÃo de cada uma nÃo tÃm correlaÃÃo quanto ao nÃvel de insolvÃncias das OPS. De maneira esperada os indicadores econÃmicos financeiros de endividamento (CT/CP e ENDIV) e de recebimento (PMCR) foram os mais importantes na previsÃo de insolvÃncia das empresas em um perÃodo subsequente.
Bhatnagar, Rajiv. "A knowledge-based operator advisor system for integration of fault detection, control, and diagnosis to enhance the safe and reliable operation of nuclear power plants /." The Ohio State University, 1989. http://rave.ohiolink.edu/etdc/view?acc_num=osu148767110830585.
Повний текст джерелаFriday, Brian Matthew. "VANISHING LOCAL SCALAR INVARIANTS ON GENERALIZED PLANE WAVE MANIFOLDS." CSUSB ScholarWorks, 2019. https://scholarworks.lib.csusb.edu/etd/884.
Повний текст джерелаYélamos, Ruiz Ignacio. "A global approach for supporting operators' decision-making dealing with plant abnormal events." Doctoral thesis, Universitat Politècnica de Catalunya, 2008. http://hdl.handle.net/10803/6465.
Повний текст джерелаEsta tesis presenta un enfoque global para la gestión de situaciones anormales en plantas químicas. En esta propuesta se contempla el flujo completo de información requerido para responder efectivamente a cualquier situación anormal que se pueda presentar. Mediante esta visión global, primeramente se identifican todos los módulos de planta involucrados en la gestión de fallos; luego se focalizan esfuerzos en mejorar las técnicas que estos módulos usan para su operación; por último, se aprovechan algunas de las sinergias descubiertas mediante esta visión global de la gestión de eventos anormales.
De esta forma, el primer capítulo esetablece un primer acercamiento general a las motivaciones y ámbito de las tesis, describiendo rasgos fundamentales en la evolución de la industria química durante los últimos años y los requerimientos asociados al nuevo modelo de supervisión. El segundo capítulo resume las técnicas y aplicaciones actuales para reducir el riesgo de incidencias y accidentes en procesos químicos. Este resumen se centra principalmente en aquellas metodologías más empleadas en la literatura y aquellas con más aceptación en ambientes industriales. Una vez analizado el estado del arte en la supervisión de procesos, se propone un enfoque global de gestión de eventos anormales en el tercer capítulo, que presenta los eslabones de la cadena de gestión de eventos anormales, los cuales serán abordados en detalle en los capítulos restantes.
De esta forma, el capítulo 4 se centra en la mejora de los sistemas de adquisición de datos y su posterior tratamiento mediante reconciliación con modelos del proceso. Los capítulos 5, 6, 7 y 8 se dedican al estudio de la parte central de cualquier sistema de respuesta a eventos anormales, el módulo de diagnóstico. El capítulo 5 formaliza el problema de diagnosis y estandariza los índices de evaluación de funcionamiento de los sistemas de diagnóstico. Los capítulo 6 y 7 preentan dos nuevos sistemas de diagnosis basados en el uso de datos históricos. El primero desarrollado en el capítulo 6, implementa un algoritmo de aprendizaje llamada "Máquinas de soporte vectorial" (SVM) adoptando un enfoque "MultiEtiqueta" que permite el diagnóstico eficaz de fallos simultáneos. El segundo sistema (capítulo 7) integra un módulo de detección basado en un modelo de Análisis de Componentes Principales y un módulo de diagnóstico basado en reglas "si-entonces". Como compendio de la diagnosis, el capítulo 8 estudia las fuerzas y debilidades de los sistemas de diagnóstico propuestos y propone una integración de módulos de diagnóstico complementarios que supera el rendimiento de cualquiera de los sistemas por separado.
Los capítulos 9 y 10 están centrados en la toma efectiva de decisiones frente a desviaciones del régimen normal de operación. El capítulo 9 presenta una metodología novedosa de integración de conocimiento del proceso en línea y fuera de línea, que permite generar información sustancial de soporte al operador en la toma de decisiones. El capítulo 10 se centra también en la toma de decisiones, mostrando las sinergias generadas al integrar el sistema de diagnosis con otros módulos de planta. En este capítulo el sistema global de gestión de eventos anormales es complementado con un módulo de optimización en línea. De esta forma el nuevo soporte a la toma de decisiones frente a perturbaciones no sólo tiene en cuenta aspectos relacionados con la seguridad sino también con la economía de la planta. Además, la integración permite que la técnica de optimizaicón empleada sea más fiable en su aplicación.
Todos los capítulos incluyen una primera parte teórica seguida de una segunda parte centrada en la validación académica e industrail. Aquellos temas que exceden el alcance de estas tesis, son comentados y propuestos como trabajo futuro en el capítulo 11.
The hight automation acquired in chemical industry during last decades has made supervision a delicate and complex task. Therefore, current plants supervision require of sophisticated systems and tools that can create profit from the information installed modules. Thus, the precise tracking of process variables or the high plant operability, achieved by the current regulatory control, are aspects that must be contemplated when the plant has to give a global response against deviations from normal operating regime.
This thesis presents a global approach for the management of abnormal situations in chemical plants. In this proposal the complete flow of information required to respond to any nonstandard situation is considered. This global approach incorporates several key aspects: first, all the plant modules that are necessary in the faults management are presented; secondly, this thesis focuses on improving the techniques used in each of these modules so far. Lastly, synergies discovered by the proposed global approach are used to develop novel and promising solutions to address process safety and optimization difficulties.
Chu, Xinyuan. "System dynamics modeling for human performance in nuclear power plant operation." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/41297.
Повний текст джерелаIncludes bibliographical references (p. 62).
Perfect plant operation with high safety and economic performance is based on both good physical design and successful organization. However, in comparison with the affection that has been paid to technology research, the effort that has been exerted to enhance NPP management and organization, namely human performance, seems pale and insufficient. There is a need to identify and assess aspects of human performance that are predictive of plant safety and performance and to develop models and measures of these performance aspects that can be used for operation policy evaluation, problem diagnosis, and risk-informed regulation. The challenge of this research is that: an NPP is a system that is comprised of human and physics subsystems. Every human department includes different functional workers, supervisors, and managers; while every physical component can be in normal status, failure status, or a being-repaired status. Thus, an NPP's situation can be expressed as a time-dependent function of the interactions among a large number of system elements. The interactions between these components are often non-linear and coupled, sometime there are direct or indirect, negative or positive feedbacks, and hence a small interference input either can be suppressed or can be amplified and may result in a severe accident finally. This research expanded ORSIM (Nuclear Power Plant Operations and Risk Simulator) model, which is a quantitative computer model built by system dynamics methodology, on human reliability aspect and used it to predict the dynamic behavior of NPP human performance, analyze the contribution of a single operation activity to the plant performance under different circumstances, diagnose and prevent fault triggers from the operational point of view, and identify good experience and policies in the operation of NPPs.
(cont.) Regarding the human reliability analysis function, the partial Standardized Plant Analysis Risk Human Reliability Analysis (SPAR-H) method was applied. Performance Shaping Factors (PSFs) were employed to analyze the influence of human performance indicators already existing in ORSIM. Based on the human performance model, an operation case study was investigated. A series of carefully chosen candidate policies were tested on a computerized model that represents the structure, processes, and interactions of the underlying target NPP systems. These candidates included: (1) New management system application; (2) Personnel population change, (3) Planning delay, and (4) Tolerance to surprise workload.
by Xinyuan Chu.
S.M.
Finch, Sheri A. "Training needs assessment for an operation in a juice processing plant." Online version, 2001. http://www.uwstout.edu/lib/thesis/2001/2001finchs.pdf.
Повний текст джерелаTengberg, Oskar. "Implementation of Hydro Power Plant Optimization for Operation and Production Planning." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-74274.
Повний текст джерелаMansoor, Sa'ad. "Behaviour and operation of pumped storage hydro plants." Thesis, Bangor University, 2000. https://research.bangor.ac.uk/portal/en/theses/behaviour-and-operation-of-pumped-storage-hydro-plants(c1905e46-af51-444a-b85b-f2ee7ad1b598).html.
Повний текст джерелаAfonso, Ana Beatriz Perez. "Ações judiciais demandadas por beneficiários de uma operadora de plano de saúde." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/22/22132/tde-04052017-181823/.
Повний текст джерелаThe judicialization of health has been a growing phenomenon in the area of health and a relevant subject of the managers\' agenda. Many studies that have been produced in recent years, both in the field of Law and Health, indicate predominance in the public system. The objective of this research was to analyze the legal actions that are related to health care coverage in supplementary health care. A descriptive and cross-sectional study was conducted in a private health care operator in a large municipality / in a big city in the interior of the state of São Paulo, which provides assistance to more than 100,000 beneficiaries. We have analyzed 158 lawsuits that were filed and received by the operator and registered in the company\'s database for the period from 2012 to 2015, filed by 152 beneficiaries. The actions were classified into two large groups, with constituted subgroups, namely: actions that were related to care coverage, involving medical procedures, treatments, examinations, medications, home care / other hospitalizations; and actions of other nature, relating to injunctions of other operators to comply with the operator that was studied, maintenance of the health plan, readjustments, medical expertise, removal of the name of Serasa (Brazilian credit protection organization), exemption from deficiencies and other reasons. The actions that were requested to perform medical procedures were accounted for 57% of the demands, with emphasis on percutaneous rhizotomy (27%). The treatment of chemotherapy in services that were not accredited by the operator, SCAN PET examinations in non-compliance with ANS-authorized procedures, in addition to antineoplastic drugs and for treatment of Hepatitis C, which were not part of the list of medicines that were registered by ANVISA were highlighted in the analyzes which were carried out. The Law 9,656 / 1998 was decisive for beneficiaries to appeal to the Judiciary for assistance coverage, having a significant impact on the management of the private plan operators. The discussion on the topic should be considered legitimate and the realization / execution of this study made it possible to deepen the analysis of the effects of the judicialization on the reality of the surveyed operator, encompassing its limits and responsibilities
Aguilera, S. Miguel, C. Esteban Lagos, P. Sandra López, and M. Aracelly Salech. "Operador logístico kinder suppliers." Tesis, Universidad de Chile, 2007. http://repositorio.uchile.cl/handle/2250/135819.
Повний текст джерелаEl presente plan de negocios, tiene como objetivo evaluar la implementación de KKKiiinnndddeeerrr SSSuuuppppppllliiieeerrrsss, un operador logístico de materiales didácticos para la educación preescolar subvencionada. En nuestro país, la educación preescolar 100% subvencionada se imparte en establecimientos con tres tipos de administración: Municipales, JUNJI y Fundación Integra, los que en conjunto agrupan a más de 5.240 establecimientos. Una de las características que hace atractivo este proyecto se relaciona con el hecho de que hoy, existiendo un promedio de 18 llamados a licitación anuales (mecanismo mediante el cual determinan al proveedor de los materiales), la mitad de éstas son declaradas desiertas. Existen deficiencias fundamentalmente al momento de abastecer y distribuir los materiales solicitados, todo lo cual nos lleva a visualizar como una oportunidad de negocio dirigir la logística entre la oferta y la demanda por este tipo de bienes. Adicionalmente, en Chile, sólo la educación parvularia subvencionada por el Estado considera una inversión anual por más de MM$2.975. El monto de inversión inicial asciende a MM$18. La tasa de descuento calculada asciende a 18,96%, obteniendo un VAN MM$32 y una TIR de 56% ambos para el inversionista.
Nackfors, Glenn, and Damir Hodo. "Utveckling av ett standardiserat operatörsobjekt i plant simulation." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11531.
Повний текст джерелаExamensarbetet inom automatiseringsteknik på 30hp är genomfört vid Volvo Cars Coperation (VCC) i Skövde i samarbete med Högskolan i Skövde. Med dagens bemanningsmetod upplever VCC svårigheter med att uppnå en optimal beläggning på operatörerna, då det har varit problematiskt att få fram hur mycket arbete en operatör klarar av. Operatörer är en ofta förbisedd del av simulering eftersom de är komplexa att modellera. Det genomförda examensarbetet består av att utveckla ett standardiserat operatörsobjekt i simuleringsmjukvaran Plant Simulation från Siemens. Med hjälp av detta objekt ska det bli enklare att bemanna effektivt med avseende på antal arbetsområden, operatörernas kompetens samt hur många operatörer det krävs per arbetsområde. I VCCs egenutvecklade bibliotek i Plant Simulation fanns det redan ett objekt för operatörer. Detta objekt användes som grund för utveckling av det nya operatörsobjektet. Vid utveckling av det nya objektet utfördes datainsamling i form av både kvalitativ och kvantitativ art för att ta reda på vilken funktionalitet som det nya objektet skulle inneha. Det existerande objektet utvärderades mot dessa funktionalitetskrav för att bestämma vad som skulle läggas till, tas bort eller ändras. Fem stycken huvudområden ansågs vara viktiga att utveckla: (1) operatörer som kan arbeta över två eller flera arbetsområden, (2) gångtid för operatörer från och till operationer, (3) kompetens för operatörerna, (4) inlärningskurva för operatörerna och (5) operatörer som jobbar på olika skift. Av dessa implementerades alla utan inlärningskurvan fullt ut, inlärningskurvan är en del av det fortsatta arbetet. För att kunna testa och analysera objektet genomfördes tre stycken experiment i form av fallstudier varav en av dessa fallstudier var av en verklig produktionslinje. Experimentplanen togs fram gemensamt med VCC referensgrupp och Högskolan i Skövde. Huvudmålen med experimenten var att minska antalet operatörer och att öka takt per timma. Resultatet av optimeringen för den verkliga produktionslinjen visade att en signifikant mindre bemanning skulle kunna uppnås utan en större effekt på takt per timma. Resultatet av projektet var ett standardiserat operatörsobjekt som togs fram enligt de specifikationer och mål som definierats för projektet. Detta objekt ger möjligheten att snabbare och enklare implementera operatörer i en simuleringsmodell. För att verifiera användbarheten av operatörsobjektet, importerades det och användes för simulering-baserad optimering i tre olika simuleringsmodeller. Operatörsobjektet innehåller också funktionaliteter som ger mer realistiska operatörer så som gångtid till operationer, operatörer som kan arbeta över flera arbetsområden, kompetens för operatörer samt inlärning. Resultatet från detta projekt innebär en enklare implementering av operatörer i en simuleringsmjukvara och bidrar således till mer realistiska simuleringsmodeller.