Добірка наукової літератури з теми "Placement de capteurs et d'actionneurs"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Placement de capteurs et d'actionneurs".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Placement de capteurs et d'actionneurs":
Schwartz, François, Norbert Dumas, Abir Rezgui, and Luc Hébrard. "Régulation de débit d'un fluide dans un Laboratoire sur Puce." J3eA 18 (2019): 1023. http://dx.doi.org/10.1051/j3ea/20191023.
Soto Molina, Victor Hugo, and Hugo Delgado Granados. "Comparación de distintos métodos de instalación de mini data loggers en suelo de alta montaña; una contribución al estudio del ambiente periglaciar / Comparison of different methods of installing mini data loggers in high mountain ground; a contribution to the study of the periglacial environment." Ería 2, no. 2 (October 10, 2019): 165–82. http://dx.doi.org/10.17811/er.2.2019.165-182.
Harmand, Jérôme, and Jean Philippe Steyer. "Placement optimal des capteurs et actionneurs d’un bioprocédé." Déchets, sciences et techniques, no. 26 (2002). http://dx.doi.org/10.4267/dechets-sciences-techniques.2370.
Дисертації з теми "Placement de capteurs et d'actionneurs":
Brakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process." Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
The aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Festin, Nicolas. "Elaboration d'actionneurs et capteurs polymères et intégration dans des systèmes de perceptions biomimétiques." Phd thesis, Université de Cergy Pontoise, 2012. http://tel.archives-ouvertes.fr/tel-01045100.
Giraud, Claude. "Contribution aux problèmes de sélection et de placement de capteurs." Montpellier 2, 1995. http://www.theses.fr/1995MON20138.
Bilel, Romdhani. "Exploitation de l'hétérogénéité des réseaux de capteurs et d'actionneurs dans la conception des protocoles d'auto-organisation et de routage." Phd thesis, INSA de Lyon, 2012. http://tel.archives-ouvertes.fr/tel-00763827.
Romdhani, Bilel. "Exploitation de l'hétérogénéité des réseaux de capteurs et d'actionneurs dans la conception des protocoles d'auto-organisation et de routage." Phd thesis, INSA de Lyon, 2012. http://tel.archives-ouvertes.fr/tel-00941099.
Degryse, Emmanuel. "Etude d'une nouvelle approche pour la conception de capteurs et d'actionneurs pour le contrôle des systèmes flexibles." Compiègne, 2001. http://www.theses.fr/2001COMP1363.
Biet, Mélisande. "Conception et contrôle d'actionneurs électro-actifs dédiés à la stimulation tactile." Lille 1, 2007. https://pepite-depot.univ-lille.fr/LIBRE/Th_Num/2007/50376-2007-Biet.pdf.
DE, PIERI EDSON ROBERTO. "Modelisation et commande de structures flexibles : reduction du modele, placement des capteurs et commande robuste." Paris 6, 1991. http://www.theses.fr/1991PA066611.
Bousghiri, Souad. "Diagnostic de fonctionnement des procédés continus par réconciliation d'état généralisé : application à la détection de pannes de capteurs et d'actionneurs." Nancy 1, 1994. http://www.theses.fr/1994NAN10396.
Bruant, Isabelle. "Positionnement optimal d'actionneurs et de capteurs en controle actif des vibrations de structure, application a des poutres equipees d'elements piezo-electriques." Cachan, Ecole normale supérieure, 1999. http://www.theses.fr/1999DENS0023.