Книги з теми "Physico-Mechanical and hygro-Thermal properties"

Marghussian, V. K. Thermo-mechanical properties of ceramic fibres. Carnforth, Lancashire, England: Parthenon Press, 1986.

Menard, Kevin Peter. Dynamic mechanical analysis: A practical introduction. Boca Raton, Fla: CRC Press, 1999.

David, Porter. Group interaction modelling of polymer properties. New York: M. Dekker, 1995.

Taya, Minoru. Metal matrix composites: Thermomechanical behavior. Oxford: Pergamon, 1989.

Liu, Wei. Thermische Stabilität und mechanische Eigenschaften quasikristalliner Legierungen. Düsseldorf: VDI, 1993.

J, Arsenault R., ed. Metal matrix composites: Thermomechanical behavior. Oxford, England: Pergamon Press, 1989.

McManus, Hugh L. N., 1958-, Bowles Kenneth J, and Lewis Research Center, eds. Mechanical properties of degraded PMR-15 resin. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

A, Schneider Gerold, Petzow G, North Atlantic Treaty Organization. Scientific Affairs Division., and NATO Advanced Research Workshop on the Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics (1992 : Munich, Germany), eds. Thermal shock and thermal fatigue behavior of advanced ceramics. Dordrecht: Kluwer Academic Publishers, 1993.

M, Steen, and Lohr R. D, eds. Ultra high temperature mechanical testing. Cambridge: Woodhead, 1995.

Campbell, Christian X. Databook on mechanical and thermophysical properties of particulate-reinforced ceramic matrix composites. West Lafayette, IN: Ceramics Information Analysis Center, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, 1995.

Campbell, Christian X. Databook on mechanical and thermophysical properties of fiber-reinforced ceramic matrix composites. West Lafayette, IN: Ceramic Information Analysis Center, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, 1997.

M, Kennedy John, Moeller Helen H. 1954-, Johnson W. S, ASTM Committee D-30 on High Modulus Fibers and Their Composites., and ASTM Committee E-24 on Fracture Testing., eds. Thermal and mechanical behavior of metal matrix and ceramic matrix composites. Philadelphia, PA: ASTM, 1990.

Ji xie re bian xing li lun ji ying yong: Theory and application of mechanical thermal deformation. Beijing Shi: Guo fang gong ye chu ban she, 2009.

Jenkins, Michael G., Edgar Lara-Curzio, and Stephen T. Gonczy. Mechanical, thermal, and environmental testing and performance of ceramic composites and components. West Conshohocken, PA: ASTM, 2000.

1958-, Jenkins Michael G., Lara-Curzio Edgar 1963-, Gonczy Stephen T. 1947-, and Symposium on Environmental, Mechanical, and Thermal Properties and Performance of Continuous Fiber Ceramic Composite (CFCC) Materials and Components (1999 : Seattle, Wash.), eds. Mechanical, thermal, and environmental testing and performance of ceramic composites and components. West Conshohocken, PA: ASTM, 2000.

Barton, James. Le verre, science et technologie. Les Ulis: EDP sciences, 2005.

Combette, Patrick. Physique des polymères. Montréal, QC: Presse internationales Polytechnique, 2005.

Mehrdad, Negahban, American Society of Mechanical Engineers. Applied Mechanics Division., and Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), eds. Current research in the thermo-mechanics of polymers in the rubbery-glassy range, 1995: Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York, N.Y: American Society of Mechanical Engineers, 1995.

F, Jones W., Whitney James Martin 1936-, American Society of Mechanical Engineers. Aerospace Division., American Society of Mechanical Engineers. Applied Mechanics Division., and American Society of Mechanical Engineers. Winter Meeting, eds. Advances in experimental mechanics and biomimetics: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York: ASME, 1992.

Menard, Kevin P. Dynamic Mechanical Analysis. London: Taylor and Francis, 2008.

S, Misra M., and Langley Research Center, eds. Measurement of mechanical and thermophysical properties of dimensionally stable materials for space applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Murray, David. Thermal and mechanical properties of silicone elastomers in composite part manufacture. Salford: University of Salford, 1987.

Nouri, Mohammad Razavi. Thermal and mechanical properties of polypropylene, metallocene polyethylenes and their blends. Birmingham: University of Birmingham, 2002.

International, ASM, and ebrary Inc, eds. Parametric analyses of high-temperature data for aluminum alloys. Materials Park, Ohio: ASM International, 2008.

American Society of Mechanical Engineers. Winter Meeting. Thermal effects on structures and materials: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y: The Society, 1990.

Bin, Yang, and Fu Yong Qing, eds. Polyurethane shape memory polymers. Boca Raton: Taylor & Francis, 2012.

United States. National Aeronautics and Space Administration., ed. Interfacial effects on the thermal and mechanical properties of graphite/copper composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Dynamic mechanical analysis: A practical introduction. Boca Raton, FL: CRC Press, 2008.

Thermodynamic properties of solids: Experiment and modeling. Weinheim: Wiley-VCH, 2010.

ASME international steam tables for industrial use: Based on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97). New York, N.Y: ASME, 2014.

T, Parry William, ed. ASME international steam tables for industrial use: Based on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97). New York, N.Y: American Society of Mechanical Engineers, 2000.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC]: National Aeronautics and Space Administration, 1991.

United States. National Aeronautics and Space Administration., ed. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC: National Aeronautics and Space Administration, 1987.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Simitses, George J. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading. [Washington, DC: National Aeronautics and Space Administration, 1987.

Mechanics of Porous Media Summer School (1994 Aussois, France). Mechanics of porous media: Lecture notes of the Mechanics of Porous Media Summer School, June 1994. Rotterdam: A.A. Balkema, 1995.

A, Charlez Philippe, ed. Mechanics of porous media. Rotterdam: A.A. Balkema, 1995.

American Society of Mechanical Engineers. Winter Meeting. Heat transfer in superconducting equipment: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

M, Michal Gary, and United States. National Aeronautics and Space Administration., eds. Mechanical and thermal properties of two Cu-Cr-Nb alloys and NARloy-Z. [Washington, DC: National Aeronautics and Space Administration, 1996.

T, Thynell S., Emery A. F, American Society of Mechanical Engineers. Heat Transfer Division., and International Mechanical Engineering Congress and Exposition (1994 : Chicago, Ill.), eds. Heat transfer in thin films: Presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y: American Society of Mechanical Engineers, 1994.

Khalil, Salem Ismail. Thermal and mechanical properties of crystalline polyesters poly(ethylene terephthalate) and poly(butylene terephthalate). Birmingham: University of Birmingham, 1985.

American Society of Mechanical Engineers. Winter Meeting. Temperature/fluid measurements in electronic equipment: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1987.

K, Liaw P., Nicholas T, Metallurgical Society (U.S.). Mechanical Metallurgy Committee., and Metallurgical Society (U.S.). Phase Transformation Committee., eds. Effects of load and thermal histories on mechanical behavior of materials: Proceedings of a symposium sponsored by the Mechanical Metallurgy and the Phase Transformation Committees of TMS-AIME, held at the 1987 TMS-AIME Annual Meeting in Denver, Colorado, February 22-26, 1987. Warrendale, Pa: Metallurgical Society, 1987.

Richard, Riff, and United States. National Aeronautics and Space Administration., eds. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading: A semi-annual status report. [Washington, DC: National Aeronautics and Space Administration, 1989.

Richard, Riff, and United States. National Aeronautics and Space Administration., eds. Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading: A semi-annual status report. [Washington, DC: National Aeronautics and Space Administration, 1989.

American Society of Mechanical Engineers. Winter Meeting. Computerized thermophysical property packages: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

Kazantzis, Antonios Vasileiou. Thermal stability, mechanical properties and deformation microstructures of the laves phase Cr[inferior two]Nb. Birmingham: University of Birmingham, 1999.

Mitchell, M. R. (Michael R.), 1941- editor of compilation, Smith, Stephen W. (Stephen William), 1965- editor of compilation, Woods, Terry, 1960- editor of compilation, Berg, Brian, 1958- editor of compilation, and ASTM International, eds. Fatigue and fracture of medical metallic materials and devices. West Conshohocken, PA: ASTM International, 2014.

Fisher, David. Mechanical Properties of MAX Phases. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901274.

Fisler, Diana, Marcin Pazera, and ASTM Committee C-16 on Thermal Insulation Staff. Performance, Properties, and Resiliency of Thermal Insulations. American Society for Testing & Materials, 2021.