Дисертації: "Photovoltaic (PV) panels(PV)"

1

Bekker, Bernard. "Methods to extract maximum electrical energy from PV panels on the earth's surface." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/50021.

Повний текст джерела

Анотація:

Thesis (MScIng)--University of Stellenbosch, 2004.
ENGLISH ABSTRACT: This thesis investigates methods to extract the maximum amount of electrical energy from a py panel. The thesis is divided into four parts, focussing on different aspects relating to this topic. The first part will investigate the role that py energy is likely to play in South Africa's future energy scenario, by looking at topics like the greenhouse effect and the economics of energy production. Secondly the thesis will look at how to position py panels optimally for maximum energy generation through the year. A software model of a py panel is developed which can calculate available py energy and energy generation costs for a given location, based on parameters like the positioning of the py panel and historic weather data. Thirdly the optimal design of a maximum power point tracker is investigated. The optimal design, based on a k-sweep voltage ratio maximum power point tracking algorithm, is implemented using a DSP controlled boost converter circuit. Finally, the best methods to store energy generated using py panels are explored. Energy storage technologies are compared for rural, off-grid applications in South Africa, and the design and implementation of a pulse-charging lead-acid battery charging strategy is explained.
AFRIKAANSE OPSOMMING: Hierdie tesis ondersoek maniere waarop die maksimum hoeveelheid elektriese energie vanuit 'n py paneelonttrek kan word. Die tesis word in vier dele verdeel, wat elkeen fokus op 'n ander aspek van die onderwerp. Die eerste kyk na die rol wat PV energie potensieël kan speel in die toekomstige energie produksie binne Suid Afrika, deur te kyk na onderwerpe soos die kweekhuis effek, en die ekonomiese sy van energie produksie. Tweedens kyk die tesis na metodes om 'n py paneeloptimaal te posisioneer vir maksimum energie deur die jaar. 'n Sagteware model van 'n PV paneel word ontwikkel wat die hoeveelheid beskikbare energie, en die kostes daarvan, kan bereken vir 'n spesifieke plek, gebaseer op PV paneel data en vorige jare se atmosferiese data. Derdens word agtergrond oor maksimum drywingspunt volgers gegee, en die ontwerp en bou van 'n k-variërende, spannings verhouding maksimum kragpunt volger verduidelik, geimplimenteer deur van 'n DSP en 'n opkapper baan gebruik te maak. Laastens word die beste maniere om PV energie te stoor, vir landelike toepassings weg vanaf die Eskom netwerk, ondersoek. Alle beskikbare tegnologieë word eers vergelyk met mekaar, waarna die ontwerp en bou van 'n puls-laai loodsuur batterylaaier verduidelik word.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Kroutil, Roman. "Komplexní provozní diagnostika FVE-T14 - opatření pro optimalizaci provozu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242083.

Повний текст джерела

Анотація:

The aim of the Thesis is theoretical clarification of the issues of photovoltaic power plants, their diagnostics, inspection and performance measurement, including negative impacts on their operation and subsequent application of theoretical knowledge during practical inspection and diagnostics of PV power plants. In its introductory part, the Thesis deals with design, manufacturing and development of PV cells and panels and describes other necessary elements and components, including their use in individual types of photovoltaic systems. Another part describes electric parameters of PV cells and panels, especially the parameters that can be found out by measurement of V-A characteristics and also the parameters affecting the shape of the V-A characteristics. The third part is focused on failures of photovoltaic systems, which include various defects of photovoltaic cells and panels, it also provides for adverse factors affecting operation of the entire system, associated not only with weather influences but also with the actual design of the photovoltaic system. The fourth part deals with possibilities of increasing the cost-effectiveness of electricity generation by PV power plants on the basis of practical experience of their operators. The subsequent part determines, on the basis of technical standards, procedures for PV power plant inspections, the procedures for measurement and diagnostics of PV power plants and also other prerequisites connected with inspections and measurements. This part includes also a description of requirements for measuring devices, most frequent measurement errors, adverse impacts affecting measurements and methods of assessment of the data measured. The last part of the Thesis is practical. At first it deals with verification of the impact of defects of PV modules on the shape of their V-A characteristics, then with execution of inspections and diagnostics of a particular PV power plant, evaluation of the data identified and measured, as well as with a proposal of optimisation measures to increase cost-efficiency of the operation of that particular PV power plant.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Wang, Xin. "Online health monitoring of photovoltaic panels by converter-based impedance spectroscopy." Electronic Thesis or Diss., Université de Lorraine, 2024. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2024_0039_WANG.pdf.

Повний текст джерела

Анотація:

Pour répondre aux besoins énergétiques croissants à travers le monde et dans un objectif de développement durable, l'utilisation de l'énergie solaire entraine une augmentation significative de l'installation de panneaux photovoltaïques (PV) permettant une production d'électricité propre et renouvelable. Cependant, les panneaux PV sont susceptibles de présenter des défauts dus aux menaces environnementales, aux facteurs humains ou à des périodes de fonctionnement prolongées. Ces défauts peuvent entraîner des pertes de puissance, une faible efficacité, une instabilité du système et présenter un risque de sécurité. La surveillance de l'état de santé peut atténuer ces problèmes et améliorer la fiabilité globale et l'efficacité de fonctionnement des panneaux PV. Parmi les outils de surveillance de l'état de santé existants pour les panneaux PV, la spectroscopie d'impédance (IS) offre un moyen puissant et non destructif d'acquérir l'impédance interne des panneaux PV sur une large plage de fréquences. L'IS basée sur le convertisseur peut aider à réduire les coûts globaux du système et à faciliter les applications en ligne, car aucun équipement supplémentaire n'est nécessaire. Cependant, la stratégie de contrôle du convertisseur doit être spécifiquement conçue. Tout d'abord, étant donné que l'injection du signal de perturbation est réalisée en contrôlant les signaux de commutation, la largeur de bande du convertisseur limitera la fréquence maximale du signal de perturbation. Obtenir un spectre IS complet avec une précision suffisante peut donc être un défi. Deuxièmement, pour garantir une puissance de sortie quasi maximale des panneaux PV même pendant la mise en œuvre de l'IS, un schéma de contrôle coopératif entre le suivi du point de puissance maximale (MPPT) et le mode IS doit être envisagé. Une stratégie de contrôle à deux niveaux du convertisseur. Le contrôle de niveau supérieur réalise le contrôle coopératif des différents modes de fonctionnement, notamment les modes MPPT, de suivi du point d'injection et IS. Le contrôle de niveau inférieur comprend le contrôle séparé de chaque mode. En particulier, pour le mode IS, les contrôles en boucle ouverte et en boucle fermée ont été étudiés et comparés systématiquement. Sous le contrôle en boucle ouverte, une analyse de la résonance intrinsèque du convertisseur et de la limitation de fréquence du signal de perturbation est effectuée. De plus, une méthode de configuration adaptative pour l'amplitude du rapport cyclique en courant alternatif est proposée pour éliminer l'influence de la résonance et améliorer la validité et la précision de la mesure IS. Sous le contrôle en boucle fermée, basé sur trois contrôleurs de compensation couramment utilisés en contrôle linéaire de systèmes, deux méthodes de contrôle, appelées contrôle unifié et contrôle séparer, sont conçues et comparées. Dans le contrôle unifié, un seul contrôleur proportionnel-intégral régule les composantes CC et CA ensemble pour atteindre les objectifs de contrôle. Dans le contrôle séparé, un filtre passe-bas segmenté est conçu. Un contrôleur proportionnel et un contrôleur quasi-proportionnel résonant sont ensuite appliqués séparément pour contrôler la composante CA. Basée sur les mesures IS acquises, un AC-ECM simplifié du panneau PV est proposé. Cet AC-ECM offre une approche d'ajustement pour le spectre incomplet obtenu par le biais de l'IS basée sur le convertisseur. De plus, quatre caractéristiques de l'état de santé sont extraites et définies pour surveiller les états de santé du panneau PV dans diverses conditions de fonctionnement. Enfin, une plateforme expérimentale a été développée. Une étude expérimentale a été menée pour vérifier que sous les stratégies peuvent être obtenues. Dans diverses conditions de fonctionnement, l'efficacité de la méthode de surveillance IS en ligne basée sur les caractéristiques extraites du panneau PV est également vérifiée
To meet the world's growing energy needs and with a view to sustainable development, the use of solar energy is leading a significant increase in the installation of photovoltaic (PV) panels, enabling the production of clean and renewable electricity. However, the PV panels are susceptible to faults during operating. These faults can result in power losses, low efficiency, system instability, even pose a risk of security. Health monitoring can mitigate these issues and improve the overall operating reliability and efficiency of PV panels. Among existing health monitoring tools for PV panels, impedance spectroscopy (IS) provides a powerful, non-destructive way to acquire PV panels' internal impedance over a wide frequency range. Compared with specific workstation-based IS, converter-based IS can help reduce overall system costs and facilitate online applications, as no additional equipment is required. However, the control strategy of the power converter needs to be specifically designed. Firstly, the bandwidth of the converter will limit the maximum frequency of the perturbation signal. Obtaining a complete IS spectrum with sufficient accuracy can thus be challenging. Secondly, to ensure a quasi-maximum output power of PV panels even during IS implementation, a cooperative control scheme between maximum power point tracking (MPPT) and IS modes should be considered. The major objectives of this research are twofold: (1) to propose a systematic design guideline for control strategies of converter-based IS implementation; (2) to establish an appropriate AC equivalent circuit model (AC-ECM) for PV panels and extract valuable health indicators for online health monitoring of PV panels. In one aspect, a bi-level control strategy of the power converter including an upper-level and a lower-level control is proposed. The upper-level control achieves the cooperative control of different operating modes, including MPPT, injection point tracking (IPT) and IS modes. The lower-level control includes the separate control of each mode. Particularly, for the IS mode, both open-loop control and closed-loop control have been systematically studied and compared. Under open-loop control, an analysis of the intrinsic resonance of the converter and the frequency limitation of the perturbation signal is performed. Furthermore, an adaptive configuration method for the amplitude of the AC duty cycle is proposed to eliminate the influence of the resonance and enhance the accuracy of IS measurement. Under closed-loop control, based on three commonly used compensation controllers, two control methods, named unified control and separated control, are designed and compared. In the unified control, a single proportional-integral (PI) controller controls the DC and AC components together to meet the control objectives. Meanwhile, in the separated control, a segmented lower pass filter (LPF) with a variable cut-off frequency is designed to effectively separate the DC component of the PV panel current from the AC perturbation signal. A proportional (P) and a quasi-proportional resonant (QPR) are further applied separately to control the AC component. In the other aspect, based on the acquired IS measurements, a simplified AC-ECM of the PV panel is proposed. This AC-ECM offers a fitting approach for the incomplete spectrum obtained through converter-based IS. Additionally, four health features are extracted and defined for monitoring the health states of the PV panel under various operating conditions. Finally, an experimental platform has been developed for online IS implementation. An experimental study has been conducted to verify that under the proposed control strategies, reliable and accurate IS measurements can be achieved. Under various operating conditions, the effectiveness of the online IS monitoring method based on the extracted features of the PV panel is verified as well

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Badri, Seyed Ali Mohammad. "Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System." Thesis, Högskolan Dalarna, Energi och miljöteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:du-12666.

Повний текст джерела

Анотація:

This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Saadon, Syamimi. "Modeling and simulation of a ventilated building integrated photovoltaic/thermal (BIPV/T) envelope." Thesis, Lyon, INSA, 2015. http://www.theses.fr/2015ISAL0049.

Повний текст джерела

Анотація:

La demande d'énergie consommée par les habitants a connu une croissance significative au cours des 30 dernières années. Par conséquent, des actions sont menées en vue de développement des énergies renouvelables et en particulier de l'énergie solaire. De nombreuses solutions technologiques ont ensuite été proposées, telles que les capteurs solaires PV/T dont l'objectif est d'améliorer la performance des panneaux PV en récupérant l’énergie thermique qu’ils dissipent à l’aide d’un fluide caloporteur. Les recherches en vue de l'amélioration des productivités thermiques et électriques de ces composants ont conduit à l'intégration progressive à l’enveloppe des bâtiments afin d'améliorer leur surface de captation d’énergie solaire. Face à la problématique énergétique, les solutions envisagées dans le domaine du bâtiment s’orientent sur un mix énergétique favorisant la production locale ainsi que l’autoconsommation. Concernant l’électricité, les systèmes photovoltaïques intégrés au bâtiment (BIPV) représentent l’une des rares technologies capables de produire de l’électricité localement et sans émettre de gaz à effet de serre. Cependant, le niveau de température auquel fonctionnent ces composants et en particulier les composants cristallins, influence sensiblement leur efficacité ainsi que leur durée de vie. Ceci est donc d’autant plus vrai en configuration d’intégration. Ces deux constats mettent en lumière l’importance du refroidissement passif par convection naturelle de ces modules. Ce travail porte sur la simulation numérique d'une façade PV partiellement transparente et ventilée, conçu pour le rafraichissement en été (par convection naturelle) et pour la récupération de chaleur en hiver (par ventilation mécanique). Pour les deux configurations, l'air dans la cavité est chauffé par la transmission du rayonnement solaire à travers des surfaces vitrées, et par les échanges convectif et radiatif. Le système est simulé à l'aide d'un modèle multi-physique réduit adapté à une grande échelle dans des conditions réelles d'exploitation et développé pour l'environnement logiciel TRNSYS. La validation du modèle est ensuite présentée en utilisant des données expérimentales du projet RESSOURCES (ANR-PREBAT 2007). Cette étape a conduit, dans le troisième chapitre du calcul des besoins de chauffage et de refroidissement d'un bâtiment et l'évaluation de l'impact des variations climatiques sur les performances du système. Les résultats ont permis enfin d'effectuer une analyse énergétique et exergo-économique
The demand of energy consumed by human kind has been growing significantly over the past 30 years. Therefore, various actions are taken for the development of renewable energy and in particular solar energy. Many technological solutions have then been proposed, such as solar PV/T collectors whose objective is to improve the PV panels performance by recovering the heat lost with a heat removal fluid. The research for the improvement of the thermal and electrical productivities of these components has led to the gradual integration of the solar components into building in order to improve their absorbing area. Among technologies capable to produce electricity locally without con-tributing to greenhouse gas (GHG) releases is building integrated PV systems (BIPV). However, when exposed to intense solar radiation, the temperature of PV modules increases significantly, leading to a reduction in efficiency so that only about 14% of the incident radiation is converted into electrical energy. The high temperature also decreases the life of the modules, thereby making passive cooling of the PV components through natural convection a desirable and cost-effective means of overcoming both difficulties. A numerical model of heat transfer and fluid flow characteristics of natural convection of air is therefore undertaken so as to provide reliable information for the design of BIPV. A simplified numerical model is used to model the PVT collector so as to gain an understanding of the complex processes involved in cooling of integrated photovoltaic arrays in double-skin building surfaces. This work addresses the numerical simulation of a semi-transparent, ventilated PV façade designed for cooling in summer (by natural convection) and for heat recovery in winter (by mechanical ventilation). For both configurations, air in the cavity between the two building skins (photovoltaic façade and the primary building wall) is heated by transmission through transparent glazed sections, and by convective and radiative exchange. The system is simulated with the aid of a reduced-order multi-physics model adapted to a full scale arrangement operating under real conditions and developed for the TRNSYS software environment. Validation of the model and the subsequent simulation of a building-coupled system are then presented, which were undertaken using experimental data from the RESSOURCES project (ANR-PREBAT 2007). This step led, in the third chapter to the calculation of the heating and cooling needs of a simulated building and the investigation of impact of climatic variations on the system performance. The results have permitted finally to perform the exergy and exergoeconomic analysis

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Boman, Kristin, Ida Adolfsson, and Sofia Ekbring. "Bifacial photovoltaic systems established in a Nordic climate : A study investigating a frameless bifacial panel compared to a monofacial panel." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-384180.

Повний текст джерела

Анотація:

The aim with this project was to study the power output from a frameless bifacial photovoltaic (PV) system relative to a traditional monofacial PV system with a frame. A general overview of how the geographical conditions affects the energy utilization of different PV systems is investigated throughout the project. Also, the study examined if further comparisons and evaluations, between PV systems, can be better established. The two examined solar parks, installed under different conditions, are located in Uppsala and Enköping, Sweden. In order to fulfill the aim and compare the different PV systems, three cases were analyzed. To increase the credibility of a comparison between the two cities, a sensitivity analysis considering the weather condition was executed. In case one, the result indicates that a bifacial panel is 5.2% and 3.6% more advantageous than a traditional monofacial panel during summer and winter, respectively. In case two, the frameless, more tilted and elevated bifacial panel is 58% and 680% more advantageous than a traditional monofacial panel during summer and winter, respectively. Also, in case three, the frameless, more tilted and elevated bifacial panel is 19% and 76% more advantageous than a bifacial panel with frame during summer and winter, respectively. When installing a new solar park, it is important to consider the location’s specific features since these affects the energy yield of the PV system. Future installations, which are installed with the intention to evaluate certain properties, is suggested to be installed with more initially comparable conditions in mind.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Palumbo, Adam M. "Design and Analysis of Cooling Methods for Solar Panels." Youngstown State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1389719304.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Dvořák, Vít. "Návrh fotovoltaické elektrárny pro rodinný dům v okrese Jihlava." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442514.

Повний текст джерела

Анотація:

This diploma thesis deals with the design of a photovoltaic solar power station for a specific family house in the Jihlava region. The aim of the work was to get acquainted with technologies about the production of solar systems, evaluate the market in the Czech Republic and create a design of photovoltaic solar power station. Three designs of power stations were created with the help of the PV * SOL design system. Each design uses different photovoltaic cell technology. The result of each power station design is a complete finished project, which is based on many factors such as the efficiency of the entire system in a certain location, financial analysis, return on investment and more. In addition, these projects meet the conditions for the preparation of the subsidy program Nová zelená úsporám. At the end of the work, all three designed power stations are evaluated and with the help of multicriteria analysis, the best and most advantageous power station design for the given locality is determined. In the end, the idea of further development of the project is presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

García-Gutiérrez, Luis Antonio. "Développement d'un contrôle actif tolérant aux défaillances appliqué aux systèmes PV." Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30071.

Повний текст джерела

Анотація:

Cette thèse de doctorat aborde la problématique de la réalisation d'un système de contrôle actif de détection de défaut et diagnosis (FDD) pour un système de conversion photovoltaïque. Ce type de système de production d'énergie électrique est composé de panneaux solaires, d'un dispositif MPPT, d'un convertisseur de courant DC-DC, d'un onduleur DC-AC et d'une charge. Le système de contrôle actif à tolérance de pannes qui a été développé dans cette thèse est composé de deux étages : * Un étage assurant la fonction de diagnostic et comprenant les fonctions de détection de défauts, la fonction d'isolement de défauts, l'identification de défauts et l'estimation de l'ampleur du/des défaut(s) * Une fonction de reconfiguration du système photovoltaïque. Ce manuscrit est divisé en quatre chapitres : * Introduction au problème et révision de l'état de la technique * Modélisation mathématique du système photovoltaïque avec une validation expérimental de ce dernier effectué sur la plateforme PV de caractérisation du bâtiment réel ADREAM (Laboratoire LAAS-CNRS) * Conception et mise en œuvre du système de diagnostic de pannes du système photovoltaïque comprenant un Système actif à tolérance de pannes * Un système de diagnostic expérimental en cours de développement à l'aide d'un dispositif FPGA
This work contributes by developing an active fault tolerant control (AFTC) for Photovoltaic (PV) systems. The fault detection and diagnosis (FDD) methodology is based on the analysis of a model that compares real-time measurement. We use a high granularity PV array model in the FDD tool to allow faults to be detected in complex conditions. Firstly, the research focuses on fault detection in complex shadow conditions. A real-time approach is presented to emulate the electrical characteristics of PV modules under complex shadow conditions. Using a precise emulators approach is a real challenge to study the high non-linearity and the complexity of PV systems in partial shading. The real-time emulation was validated with simple experimental results under failure conditions to design specific fault-detection algorithms in a first sample. The second part of the research addresses the FDD method for DC/DC and DC/AC power converters that are connected to the grid. Primary results allowed us to validate the system's recovery for normal operating points after a fault with this complete AFTC approach. Emulations based on the simulation of distributed power converters, fault detection methodologies based on a model, and a hybrid diagnostician were then presented

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Salim, Hengky K. "Rooftop photovoltaic product stewardship transition in Australia using a novel systems approach and serious game." Thesis, Griffith University, 2021. http://hdl.handle.net/10072/410160.

Повний текст джерела

Анотація:

In the past decade, there has been an exponential increase on the PV adoption in Australia. However, concerns have been raised over the potential environmental and human health impacts from the photovoltaic (PV) panel waste generated once the technologies reach their end-of-life (EoL). Creating a circular economy system for this product is imperative to avoid these negative impacts and to unlock economic opportunities from recovering valuable materials inside the PV panels. However, with current recycling technologies and waste volume, it is not possible to achieve an economy of scale. Designing a product stewardship scheme coupled with landfill regulations are one way to mitigate this problem by incentivising producers to financially contribute to the collection and recovery activities. Promoting an effective waste management policy requires a holistic and systemic consideration due to the multi-faceted nature of stakeholder interests and goals in this system. Thus, the overarching aim of this research is to develop a systems model and a serious game that can explore different transition pathways toward managing EoL PV panels in Australia through a careful consideration into the causal relationships, feedback mechanisms, and time delays that are present in the system. This research selected the residential-scale PV panel sector as its case study because this sector makes up the largest number of PV adoption. This research started with identifying the knowledge gaps and synthesising the drivers, barriers, and enablers from the academic literature. These factors were then validated through an expert review process to adapt them to the Australian context. A stakeholder surveys was conducted to rank and compare these factors among different types of stakeholders to understand the problems that need to be addressed and the potential strategies to overcome them. Subsequently, a causal loop diagram (CLD) was developed to visualise the system structure and complexity where the model boundary was determined based on the previous information. The CLD was converted into a system dynamics (SD) model to perform a scenario analysis of different transition pathways (i.e. market-driven growth, conservative development, shared responsibility, and disruptive change). Finally, the SD model was converted into a serious game to communicate the model to stakeholders to improve their understanding and decision-making ability. The findings of this research suggested the importance of enabling a system of shared responsibility in managing EoL rooftop PV panels in Australia to require producers with substantial market share to participate in the product stewardship scheme. It is unlikely that under a voluntary arrangement, significant collection and recovery outcomes can be achieved since there is no incentive to participate in the product stewardship scheme. Mandating all producers to contribute to the scheme will also negatively impact the waste management cost that is internalised into the product price. The serious game is intended to convey and communicate these messages to decision-makers and industries to support their scheme design and assessment. Overall, this thesis has made significant theoretical contributions to the current body of knowledge as it shifts from a linear thinking to a systems thinking to solve a waste management problem in a holistic and systemic manner. The integration between a systems approach and a serious game also provided a new way of dealing with complex environmental problems, but also an innovative and engaging way to communicate the model and research findings to stakeholders to improve their decision-making process. It also has direct practical implications due to its close industry collaboration by supporting the on-going PV product stewardship scheme assessment.
Thesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Eng & Built Env
Science, Environment, Engineering and Technology
Full Text

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Maxamhud, Mahamed, and Arkam Shanshal. "SELF-SUFFICIENT OFF-GRID ENERGY SYSTEM FOR A ROWHOUSE USING PHOTOVOLTAIC PANELS COMBINED WITH HYDROGEN SYSTEM : Master thesis in energy system." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-49379.

Повний текст джерела

Анотація:

It is known that Sweden is categorised by being one of the regions that experience low solar radiation because it is located in the northern hemisphere that has a low potential of solar radiation during the colder seasons. The government of Sweden aim to promote a more sustainable future by applying more renewable initiative in the energy sector. One of the initiatives is by applying more renewable energy where PV panels will play a greater role in our society and in the energy sector. However, the produced energy from the PV panels is unpredictable due to changes in radiation throughout the day. One great way to tackle this issue is by combining PV panels with different energy storage system. This thesis evaluates an off-grid rowhouse in Eskilstuna Sweden where the PV panels are combined with a heat pump, thermal storage tank, including batteries and hydrogen system. The yearly electrical demand is met by utilizing PV panels, battery system for short term usage and hydrogen system for long-term usage during the colder seasons. The yearly thermal demand is met by the thermal storage tank. The thermal storage tank is charged by heat losses from the hydrogen system and thermal energy from heat pump.The calculations were simulated in Excel and MATLAB where OPTI-CE is composed with different components in the energy system. Furthermore, the off-grid household was evaluated from an economic outlook with respect to today’s market including the potential price decrease in 2030.The results indicated that the selected household is technically practicable to produce enough energy. The PV panels produces 13 560 kWh annually where the total electrical demand reaches 6 125 kWh yearly (including required electricity for the heat pump). The annual energy demand in terms of electricity and thermal heat reaches 12 500 kWh which is covered by the simulated energy system. The overproduction is stored in the batteries and hydrogen storage for later use. The back-up diesel generator does not need to operate, indicating that energy system supplies enough energy for the off-grid household. The thermal storage tank stores enough thermal energy regarding to the thermal load and stores most of the heat during the summer when there are high heat losses due to the charge of the hydrogen system. The simulated energy system has a life cycle cost reaching approximately k$318 with a total lifetime of 25 years. A similar off-grid system has the potential to reduce the life cycle cost to k$195 if the energy system is built in 2030 with a similar lifespan. The reduction occurs due to the potential price reduction for different components utilized in the energy system.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Vedin, Felix, and Camilla Sandström. "A comparison study of PV and battery technologies for EWB off-grid electrification projects in Sub-Saharan Africa." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-235497.

Повний текст джерела

Анотація:

Only 10 % of the rural population in Sub-Saharan Africa has access to electricity. At the same time the Sub-Saharan countries are close to the equator and get many sun hours a day, leading to a huge potential for solar energy. This report aims to compare different PV system components for use in Sub-Saharan Africa to facilitate EWB for their work in electrification projects in the areas. The PV system will be compared with the following factors: economic, adoptability, scalability, environmental impact and efficiency, weighed in that order. A case simulation was made for a village around Nairobi were 20 households would be supplied with solar power. Both Polycrystalline silicon cells and thin filmed CIGS were simulated were the Poly c-Si cell was both the cost-efficient and scalable choice. Poly c-Si cells was also concluded to be advantageous of the crystalline cells by the chosen factors. Pb-acid batteries are best suited for off grid PV systems in rural areas. Different types of Pb-acid batteries can be used depending on the area’s typology. Off grid solar powered microgrids could be the solutions for an increased socioeconomic wellbeing for communities in rural areas.
Endast 10% av lantbygdens befolkning i Subsahariska Afrika har tillgång till elektricitet. Samtidigt ligger de Subsahariska länderna nära ekvatorn och får många soltimmar per dygn, vilket leder till en stor potential för solenergi. Den här rapporten syftar till att jämföra olika solcellssystems komponenter för användning i östra Afrika för att främja Ingenjörer Utan Gränsers arbete inom elektrifierings projekt i området. Jämförelsen kommer utföras med följande faktorer, ekonomi, anpassningsförmåga, skalning, miljöpåverkan och effektivitet, viktat i den ordningen. En simulation gjordes för en by i området av Nairobi där 20 hushåll skulle få tillgång till solenergi. Både Poly kristallina celler och tunnfilm CIGS simulerades där Poly kristallina celler var både kostnadseffektivast samt det plats effektivaste valet. Polykristallina celler var även konkluderades vara det fördelaktiga valet av de kristallina cellerna utefter de valda faktorerna. Bly-syra batterier var bäst lämpade för själv stående solcellssystem på landsbygden. Olika typer av bly-syra batterier kan användas beroende på områdets typologi. Fristående solcellssystem kan vara en lösning till ett ökat socioekonomisk välmående för samhällen på landsbygden.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Sahli, Mehdi. "Simulation and modelling of thermal and mechanical behaviour of silicon photovoltaic panels under nominal and real-time conditions." Thesis, Strasbourg, 2019. http://www.theses.fr/2019STRAD036.

Повний текст джерела

Анотація:

Le travail présenté dans cette thèse porte sur le développement d’un modèle multi-physique numérique, destiné à étudier le comportement optique, électrique et thermique d’un module photovoltaïque. Le comportement optique a été évalué en utilisant des chaines de Markov. Le comportement électrique est obtenu pour les panneaux en Silicium à l’aide d’une méthode d’optimisation numérique. Le comportement thermique est développé en 1D sur l’épaisseur du module, et le modèle multi-physique a été faiblement couplé sous MATLAB. Le comportement sous des conditions nominales d’opération a été validé en utilisant les données déclarées par les constructeurs. Ce modèle a été utilisé pour effectuer une étude paramétrique sur l’effet des irradiances solaires en régime permanent. Le modèle a été validé pour des conditions d’utilisations réelles en comparant avec des mesures expérimentales de température et de puissance électrique. Une étude thermomécanique en 2D sous ABAQUS/CAE et se basant sur le modèle multi-physique a été effectué en conditions nominales d’opération, ainsi qu’en cycle de fatigue selon la norme 61215 pour prédire les contraintes qui sont imposées sur le panneau dans les deux cas mentionnés précédemment
The work presented in this thesis deals with the development of a numerical multi-physics model, designed to study the optical, electrical and thermal behaviour of a photovoltaic module. The optical behaviour was evaluated using stochastic modelling based on Markov chains, whereas the electrical behaviour was drawn specifically for Silicon based photovoltaic panels using numerical optimization methods. The thermal behaviour was developed in 1D over the thickness of the module, and the multi-physics module was weakly coupled in MATLAB. The behaviour of commercial panels under nominal operation conditions was validated using data declared by the manufacturers. This model was used to perform a parametric study on the effect of solar irradiances in steady state. It was also validated for real use conditions by comparing it to experimental temperature and electrical power output. A thermomechanical study in 2D in ABAQUS/CAE based in the multi-physics model was carried out in nominal operating conditions, as well as in fatigue thermal cycling according to the IEC 61215 Standard to predict the stresses that are imposed on the panel

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Bigot, Dimitri. "Contribution à l’étude du couplage énergétique enveloppe / système dans le cas de parois complexes photovoltaïques (PC - PV)." Thesis, La Réunion, 2011. http://www.theses.fr/2011LARE0024/document.

Повний текст джерела

Анотація:

Cette thèse présente un modèle thermique et électrique de paroi photovoltaïque (PV) intégrée ou semi-intégrée au bâtiment. La particularité du modèle est le transfert de chaleur entre le panneau et le bâtiment, décrit de telle manière que leurs modèles respectifs soient totalement couplés. Ceci a l'avantage de permettre la prédiction de l'impact de l'installation PV sur le champ de température du bâtiment et donc sur le confort thermique associé. Le but de l'étude est de mettre en évidence l'impact des panneaux PV en termes d'isolation thermique ou de protection solaire pour le bâtiment et la résultante en termes de gain énergétique. De plus, une séquence expérimentale a été menée à l'île de La Réunion, où le climat est tropical et humide, avec un rayonnement solaire important. Dans de telles conditions, il est important de minimiser la sollicitation thermique à travers l'enveloppe du bâtiment, en particulier la toiture. Le modèle est intégré à un code de simulation thermique du bâtiment (ISOLAB) et peut prédire l'impact des panneaux PV installés selon différentes configurations, mais aussi le productible photovoltaïque de l'installation. Finalement, l'étude expérimentale est utilisée pour fournir des éléments de validation du modèle numérique et une analyse de sensibilité est lancée pour mettre en évidence les paramètres les plus influents du modèle. Il a été démontré que les paramètres radiatifs du panneau PV ont un impact important sur le champ de température du bâtiment et que leur détermination doit être faite correctement. Les résultats de cette analyse sont ensuite utilisés pour optimiser le modèle thermique à l'aide du logiciel d'optimisation GenOpt
This thesis presents a thermal and electrical modelling of PV walls integrated to buildings. The particularity of this model is that the heat transfer that occurs through the panel to the building is described so that both building and PV thermal modelling are fully coupled. This has the advantage of allowing the prediction of the impact of PV installation on the building temperature field and also the comfort inside it. The aim of this study is to show the impact of the PV panels in terms of level of insulation or solar protection for the building. Moreover, the study has been conducted in La Reunion Island, where the climate is tropical and humid, with a strong solar radiation. In such conditions, it is important to minimise the thermal load through the roof of the building. The thermal model is integrated in a building simulation code and is able to predict the thermal impact of PV panels installed on buildings in several configurations and also their production of electricity. Finally, the experimental study is used to give elements of validation for the numerical model and a sensitivity analysis has been run to put in evidence the governing parameters. It has been shown that the radiative properties of the PV panel have a great impact on the temperature field of the tested building and the determination of these parameters has to be taken with care. Results of sensitivity analysis are used to optimize the PV thermal model using the GenOpt optimization program

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Zoltan, Čorba. "Novi metod analize rada fotonaponskog sistema u uslovima varijacije sunčevog zračenja." Phd thesis, Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, 2016. http://www.cris.uns.ac.rs/record.jsf?recordId=100072&source=NDLTD&language=en.

Повний текст джерела

Анотація:

Rad se bavi problemom smanjenja proizvodnjeelektrične energije fotonaponske elektrane uuslovima promenljivog zračenja. Predlaže se novimetod analize rada u uslovima senčenja putem makro- imikrorekonfiguracije FN polja, koja povećavaproizvodnju električne energije.
The paper presents the problem of reducing electricityproduction of PV power plant under variation of solarradiation conditions. The author proposed a new method ofanalysis PV power plant works under partial shadingcondition trough micro- and macroconfiguration of PV array.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Kladiva, Roman. "Dlouhodobé sledování parametrů fotovoltaických panelů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220119.

Повний текст джерела

Анотація:

This thesis deals with the influence of degradation mechanisms to change the parameters of photovoltaic panels. The aim of the study was the long-term monitoring of selected solar modules, comparing their parameters with measurements from previous years and the evaluation of degradation mechanisms on their properties. The theoretical part is focused on the description of the monitored parameters and defects Panel, are discussed measuring methods by which the modules were monitored. Experimental part then consists of measuring modules individual test methods. The measured values were subsequently constructed graphical dependence, and the results were compared with measurements from previous years. The last part of the thesis is devoted to evaluation of the degradation of PV modules.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Lu, Di. "Conception et contrôle d’un générateur PV actif à stockage intégré : application à l’agrégation de producteurs-consommateurs dans le cadre d’un micro réseau intelligent urbain." Thesis, Ecole centrale de Lille, 2010. http://www.theses.fr/2010ECLI0021/document.

Повний текст джерела

Анотація:

L’intégration de panneaux photovoltaïques dans un système électrique réduit la consommation des sources fossiles et apporte des avantages environnementaux. Toutefois, l'intermittence et les fluctuations de puissance détériorent la qualité d’alimentation électrique. La solution proposée est d’ajouter des éléments de stockage, coordonnés par un contrôleur local qui gère les flux de puissance entre toutes les sources et la disponibilité énergétique. Ce générateur actif PV peut générer des références de puissance et fournir des services « système » au réseau électrique. Puis les concepts liés au micro réseau sont transposés pour concevoir un système central de gestion de l'énergie d'un réseau électrique résidentiel, qui est alimenté par des générateurs actifs PV et une micro turbine à gaz. Un réseau de communication est utilisé pour échanger des données et des références de puissance. Un système de gestion de l'énergie est développé avec différentes fonctions de contrôle sur des échelles de temps différentes afin de maximiser l'utilisation de l'énergie PV. Une planification opérationnelle quotidienne est conçue par un algorithme déterministe, qui utilise la prédiction d'énergie PV et de la charge. Puis ces références de puissance sont actualisées chaque demi-heure en tenant compte de la disponibilité de l’énergie PV et l’état des unités de stockage. Les erreurs de prévision et les incertitudes sont compensées par le réglage primaire de fréquence. Les résultats de simulation et les tests valident la conception de la commande du générateur actif photovoltaïque ainsi que le système central de gestion de l'énergie du réseau résidentiel étudié
The integration of PV power generation in a power system reduces fuel consumption and brings environmental benefits. However, the PV power intermittency and fluctuations deteriorate the power supply quality. A solution is proposed by adding energy storages, which are coordinated by a local controller that controls the power flow among all sources and implements an inner energy management. This PV based active generator can generate power references and can provide ancillary services in an electric network. Then micro grid concepts are derived to design a central energy management system of a residential network, which is powered by PV based active generators and a gas micro turbine. A communication network is used to exchange data and power references. An energy management system is developed with different time-scale functions to maximize the use of PV power. An operational daily planning is designed by a determinist algorithm, which uses 24 hour-ahead PV power prediction and load forecasting. Then power references are refreshed each half of an hour by considering the PV power availability and the states of energy storage units. Prediction errors and uncertainties are compensated by primary frequency controllers. Simulation and testing results validate the design of the PV active generator local controller and the central energy management system of the studied residential network

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Ebrahim, Mila. "Performance Evaluation of a Photovoltaic/Thermal (PVT) Collector with Numerical Modelling." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302122.

Повний текст джерела

Анотація:

In Photovoltaic/Thermal (PVT) technology, both PV and solar thermal technology are integrated in the same module for simultaneous electricity and heat production. Research has shown that there are multiple benefits from integrating PVT collectors with a ground source heat pump (GSHP) system, since it allows for seasonal storage of thermal energy over the year. Furthermore, it leads to reduced operating temperatures for the PVT collectors which can increase efficiency and lifetime. The aim of this study is to present the electric and thermal performance of a PVT collector developed by Solhybrid i Småland AB, for different environmental and fluid inlet conditions that can occur when PVT collectors are connected to a GSHP system. Furthermore, the performance of this PVT design is evaluated with ASHRAE (Standard 93-2003), to allow for comparison with other PVT collector designs, with values on the overall heat loss coefficient (UL) and heat removal factor (FR). The modelling tool used for the study is the software COMSOL Multiphysics, which uses the finite element method to solve the partial differential equations in heat transfer and fluid flow problems. Based on the performance curves, the thermal and electrical efficiency of the collector is approximately 48.0-53.4% and 19.0-19.2% respectively at a reduced temperature of zero and irradiance levels of 800-1000 W/m2 for the mass flow rate of 0.026 kg/sm2 which was determined as most suitable to increase thermal performance. Furthermore, these results resulted in a heat removal factor (FR) and overall heat loss coefficient (UL) of 0.56-0.62 and 53.4-53.5 W/m2 K respectively. The results on the performance of the PVT collector in different weather conditions shows that the inlet water temperature can significantly affect operating time and the amount of thermal energy that can be extracted during the year, especially if the collector operates in a colder climate like Sweden. To assess the accuracy of the created model, future work includes experimental testing of the studied PVT collector.
En panel med kombinerad teknik av både solceller och termisk solfångare (PVT) kan producera både elektricitet och värme samtidigt. Forskning har visat att det kan finnas flera fördelar med att integrera PVT-paneler med ett bergvärmesystem, eftersom det mjliggör lagring av termisk energi över året. Dessutom leder ett sådant system till lägre drifttemperaturer som kan öka PVT-panelens effektivitet och livslängd. Syftet med studien är att presentera den elektriska och termiska prestandan av en PVT-panel utvecklat av Solhybrid i Småland AB för olika driftförhållanden som kan uppstå på grund av olika väderförhållanden och inlopps-temperaturer när panelerna är kopplade till ett bergvärmesystem. Vidare utvärderas prestandan för denna panel med ASHRAEmetoden (standard 93-2003), för att möjliggöra jämförelse med andra PVT-paneler. Modelleringsverktyget som använts i studien är mjukvaran COMSOL Multiphysics, som använder finita elementmetoden för att lösa partiella differentialekvationer i värmeöverförings-och flödesproblem. Baserat på prestandakurvorna som presenteras i resultatet, är den termiska och elektriska verkningsgraden approximativt 48.0-53.4% respektive 19.0-19.2% för en reducerad temperatur med värdet noll, en solstrålning mellan 800-1000 W/m2, för en massflödeshastighet på 0.026 kg/sm2 som beslutades som den mest lämpliga för att öka den termiska prestandan. Resultaten resulterade i en värmeavledningsfaktor (FR) och total värmeförlustkoefficient (UL) på 0.56-0.62 respektive 53.4-53.5 W/m2 K. Resultaten på PVT-panelens prestanda under olika väderförhållanden visar att vattnets inloppstemperatur kan påverka drifttiden och mängden termisk energi som kan extraheras under året avsevärt, speciellt i nordiskt klimat. För att bedöma korrektheten i resultaten och den skapade modellen rekommenderas experimentell testning av den studerade PVT-panelen.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Franklin, Ed. "Solar Photovoltaic (PV) Site Assessment." College of Agriculture, University of Arizona (Tucson, AZ), 2017. http://hdl.handle.net/10150/625447.

Повний текст джерела

Анотація:

5 p.
An important consideration when installing a solar photovoltaic (PV) array for residential, commercial, or agricultural operations is determining the suitability of the site. A roof-top location for a residential application may have fewer options due to limited space (roof size), type of roofing material (such as a sloped shingle, or a flat roof), the orientation (south, east, or west), and roof-mounted structures such as vent pipe, chimney, heating & cooling units. A location with open space may utilize a ground-mount system or pole-mount system.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Noor, Hisham Nur Ain. "Self-cleaning Photovoltaic (PV) Modules." Thesis, Noor Hisham, Nur Ain (2017) Self-cleaning Photovoltaic (PV) Modules. Honours thesis, Murdoch University, 2017. https://researchrepository.murdoch.edu.au/id/eprint/41910/.

Повний текст джерела

Анотація:

The effect of soiling accumulation towards photovoltaic (PV) could cause a reduction in the PV system performance. The decrease in PV system output due to soiling has been proven crucial(Jiang, Lu, and Sun 2011). Thus signifies the significance of further research on the effect of soiling on a PV system. This project is a research based on the climate in Murdoch, Western Australia. This project consists of three parts; Photovoltaic (PV) performance testing, Air quality testing, Light transmittance testing. The PV performances were analysed based on three different dust mitigation conditions. The first module labelled as A is washed regularly as part of the dust mitigation strategies applied. The second module, labelled as B has a hydrophobic coating which functions when rainwater fall on the panel, the water would roll off the module at the same time rolling dust off the module. The third module, labelled as C is kept without any dust mitigation method. All three modules were tested out and washing performs the best giving a reduction in performance of 30.8% after 18 days, while B reduces in 47.4% performance and C has a 31.4% reduction in performance. Test 2 involves correlating the air quality with the dust accumulation on the PV modules. An optical dust sensor is used for this test. Test 3 has the same concept as Test 2 but is more closely related to the dust adhering to the PV modules. A glass panel is used to simulate the dust accumulation with a Light Emitting Diode (LED) and an Light Dependent Resistor (LDR) in between. A ratio-based calculation is made for test 3 to correlate the transmittance with voltage output and comparing the value when the glass is clean compared to dirty. The washed module performs the best with an average air quality of 0.025mg/m3. The worst module was the one without dust mitigation strategies, where the light transmittance reduced in 22% after two weeks of dust accumulation. Consequently, to improve the performance of the PV in the industry, soiling should not be ignored as it should be a big issue in the PV industry.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Franklin, Edward A. "Mounting Your Solar Photovoltaic (PV) System." College of Agriculture, University of Arizona (Tucson, AZ), 2017. http://hdl.handle.net/10150/625443.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Langels, Hanna, and Fredrik Gannedahl. "BiFacial PV Systems : A technological and financial comparison between BiFacial and standard PV panels." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-353708.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Carr, Anna J. "A detailed performance comparison of PV modules of different technologies and the implications for PV system design methods /." Access via Murdoch University Digital Theses Project, 2005. http://wwwlib.murdoch.edu.au/adt/browse/view/adt-MU20050830.94641.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Celik, Ilke. "Eco-design of Emerging Photovoltaic (PV) Cells." University of Toledo / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1533123980079904.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Anderson, David James. "Energy rating of photovoltaic modules." Thesis, University of Strathclyde, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.248767.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Bedrich, Karl G. "Quantitative electroluminescence measurements of PV devices." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/27303.

Повний текст джерела

Анотація:

Electroluminescence (EL) imaging is a fast and comparatively low-cost method for spatially resolved analysis of photovoltaic (PV) devices. A Silicon CCD or InGaAs camera is used to capture the near infrared radiation, emitted from a forward biased PV device. EL images can be used to identify defects, like cracks and shunts but also to map physical parameters, like series resistance. The lack of suitable image processing routines often prevents automated and setup-independent quantitative analysis. This thesis provides a tool-set, rather than a specific solution to address this problem. Comprehensive and novel procedures to calibrate imaging systems, to evaluate image quality, to normalize images and to extract features are presented. For image quality measurement the signal-to-noise ratio (SNR) is obtained from a set of EL images. Its spatial average depends on the size of the background area within the EL image. In this work the SNR will be calculated spatially resolved and as (background independent) averaged parameter using only one EL image and no additional information of the imaging system. This thesis presents additional methods to measure image sharpness spatially resolved and introduces a new parameter to describe resolvable object size. This allows equalising images of different resolutions and of different sharpness allowing artefact-free comparison. The flat field image scales the emitted EL signal to the detected image intensity. It is often measured through imaging a homogeneous light source such as a red LCD screen in close distance to the camera lens. This measurement however only partially removes vignetting the main contributor to the flat field. This work quantifies the vignetting correction quality and introduces more sophisticated vignetting measurement methods. Especially outdoor EL imaging often includes perspective distortion of the measured PV device. This thesis presents methods to automatically detect and correct for this distortion. This also includes intensity correction due to different irradiance angles. Single-time-effects and hot pixels are image artefacts that can impair the EL image quality. They can conceivably be confused with cell defects. Their detection and removal is described in this thesis. The methods presented enable direct pixel-by-pixel comparison for EL images of the same device taken at different measurement and exposure times, even if imaged by different contractors. EL statistics correlating cell intensity to crack length and PV performance parameters are extracted from EL and dark I-V curves. This allows for spatially resolved performance measurement without the need for laborious flash tests to measure the light I-V- curve. This work aims to convince the EL community of certain calibration- and imaging routines, which will allow setup independent, automatable, standardised and therefore comparable results. Recognizing the benefits of EL imaging for quality control and failure detection, this work paves the way towards cheaper and more reliable PV generation. The code used in this work is made available to public as library and interactive graphical application for scientific image processing.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Kayal, Sara. "Application of PV Panels in Large Multi-Story Buildings." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/134.

Повний текст джерела

Анотація:

Application of PV Panels in Large Multi-Story Buildings Feasibility Study Sara Kayal The awareness of global warming along with an ever increasing demand for a new source of energy has brought a strong interest in harnessing natural resources such as solar energy. This thesis evaluates the viability of applying photovoltaic (PV) panels in high-rise commercial buildings of around 20 stories. Specifically, the thesis is intended to provide a pre-planning tool during the early design stage for architects and designers who are considering the deployment of PV panels in new multi-story construction. The first three chapters cover a comprehensive literature review and describe several case studies of the application of PV panels in multi-story buildings. The first chapter serves as an introduction to the objectives and rationale of PV panel research. Chapter 2 explains the physics and characteristics of PV panel technology that is applicable to multi-story buildings. Various PV panel types are explored in this chapter and it is suggested that window-based PV panels are the most suitable type for multi-story buildings in which the available roof area is small in area and limited in flexibility due to competition with other uses. Chapter 3 investigates factors that influence the efficiency of PV panels. These factors reduce the efficiency of PV panels to about 10-15%. In Chapter 4 a study model is presented to validate the results of the previous chapters and to determine the feasibility of PV panel systems with the aid of computer model analysis and simulation. The study model includes a base case of a 20-story building that is surrounded by four adjacent buildings, one adjacent to each orientation. Five configurations of the base model with different arrangements of PV panels were analyzed. First, electrical energy of the base case was calculated without applying any PV panels. The second and third configurations include PV panels on all of the available façade areas on a typical summer and winter day, respectively. The fourth and fifth configurations feature PV panels on only the top 10 floors. The simulation results show that although some savings accrue over a 25-year life-cycle period, these savings pale in comparison with the initial capital cost associated with the purchase and installation of the PV panels. It was also found that although crystalline silicon panels have a higher initial cost, their superior efficiency and performance present them as better candidates for PV panel applications. In addition, as expected, the south orientation provides potentially the largest amount of electricity production. In Chapter 5 the simulation results are summarized. The simulation studies address the application of PV panels from three different perspectives, namely: economics; technical feasibility; and, subjective factors. The first four chapters confirm that PV panels, at the current level of technology, are not an efficient and cost effective solution for multi-story buildings. They can satisfy only a very small portion of the electrical energy demand of the building at a very high initial capital cost. However, some strategies are suggested for mitigating the dual problems of inadequate PV production volume and high initial costs. Subjective factors account for other benefits that are not related to economic considerations. These factors include educational, promotional, and business line promotion benefits that could accrue to the building owner.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Franklin, Edward. "Hand Tools Used for Solar Photovoltaic (PV) Systems." College of Agriculture, University of Arizona (Tucson, AZ), 2017. http://hdl.handle.net/10150/625442.

Повний текст джерела

Анотація:

5 p.
A description of the multiple hand tools commonly used to measure energy output of solar photovoltaic (PV) silicon-type modules. These tools include a digital multi-meter to measure voltage, a clamp-on ammeter to measure current, a pyranometer to measure solar irradience, an angle finder to measure module tilt angle, a non-contact thermometer to measure solar cell temperature, and a Solar Pathfinder to evaluate a potential site for shading issues.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Coventry, Joseph Sydney, and Joe Coventry@anu edu au. "A solar concentrating photovoltaic/thermal collector." The Australian National University. Faculty of Engineering and Information Technology, 2004. http://thesis.anu.edu.au./public/adt-ANU20041019.152046.

Повний текст джерела

Анотація:

This thesis discusses aspects of a novel solar concentrating photovoltaic / thermal (PV/T) collector that has been designed to produce both electricity and hot water. The motivation for the development of the Combined Heat and Power Solar (CHAPS) collector is twofold: in the short term, to produce photovoltaic power and solar hot water at a cost which is competitive with other renewable energy technologies, and in the longer term, at a cost which is lower than possible with current technologies. To the authors knowledge, the CHAPS collector is the first PV/T system using a reflective linear concentrator with a concentration ratio in the range 20-40x. The work contained in this thesis is a thorough study of all facets of the CHAPS collector, through a combination of theoretical and experimental investigation. A theoretical discussion of the concept of energy value is presented, with the aim of developing methodologies that could be used in optimisation studies to compare the value of electrical and thermal energy. Three approaches are discussed; thermodynamic methods, using second law concepts of energy usefulness; economic valuation of the hot water and electricity through levelised energy costs; and environmental valuation, based on the greenhouse gas emissions associated with the generation of hot water and electricity. It is proposed that the value of electrical energy and thermal energy is best compared using a simple ratio. Experimental measurement of the thermal and electrical efficiency of a CHAPS receiver was carried out for a range of operating temperatures and fluid flow rates. The effectiveness of internal fins incorporated to augment heat transfer was examined. The glass surface temperature was measured using an infrared camera, to assist in the calculation of thermal losses, and to help determine the extent of radiation absorbed in the cover materials. FEA analysis, using the software package Strand7, examines the conductive heat transfer within the receiver body to obtain a temperature profile under operating conditions. Electrical efficiency is not only affected by temperature, but by non-uniformities in the radiation flux profile. Highly non-uniform illumination across the cells was found to reduce the efficiency by about 10% relative. The radiation flux profile longitudinal to the receivers was measured by a custom-built flux scanning device. The results show significant fluctuations in the flux profile and, at worst, the minimum flux intensity is as much as 27% lower than the median. A single cell with low flux intensity limits the current and performance of all cells in series, causing a significant drop in overall output. Therefore, a detailed understanding of the causes of flux non-uniformities is essential for the design of a single-axis tracking PV trough concentrator. Simulation of the flux profile was carried out using the ray tracing software Opticad, and good agreement was achieved between the simulated and measured results. The ray tracing allows the effect of the receiver supports, the gap between mirrors and the mirror shape imperfections to be examined individually. A detailed analytical model simulating the CHAPS collector was developed in the TRNSYS simulation environment. The accuracy of the new component was tested against measured data, with acceptable results. A system model was created to demonstrate how sub components of the collector, such as the insulation thickness and the conductivity of the tape bonding the cells to the receiver, can be examined as part of a long term simulation.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Tegeder, Troy Dixon. "Development of an Efficient Solar Powered Unmanned Aerial Vehicle with an Onboard Solar Tracker." BYU ScholarsArchive, 2007. https://scholarsarchive.byu.edu/etd/856.

Повний текст джерела

Анотація:

Methods were developed for the design of a solar powered UAV capable of tracking the sun to achieve maximum solar energy capture. A single-axis solar tracking system was designed and constructed. This system autonomously rotated an onboard solar panel to find the angle of maximum solar irradiance while the UAV was airborne. A microcontroller was programmed and implemented to control the solar tracking system. A solar panel and an efficient airframe capable of housing the solar tracking system was designed and constructed. Each of these subsystems was tested individually with either ground or flight tests. Ultimately, the final assembled system was tested. These tests were used to determine where and when a UAV with an onboard solar tracker would be advantageous over a conventional solar powered UAV with PV cells statically fixed to its wings. The final UAV had a wingspan of 3.2 meters, a length of 2.6 meters, and weighed 4.1 kilograms. Its solar panel provided a maximum power output of 37.7 watts. The predicted system performance, airframe drag, and system power requirements were validated with a battery powered flight test. The UAV's analytical model predicted the drag to be 41% lower than the actual drag found from flight testing. Full system functionality was verified with a solar powered flight test. The results and analysis of the system tests are presented in this thesis. The net energy increase from the solar tracking UAV over a conventional solar powered UAV for the duration of a day is dependent on season and geographical location. The solar tracking UAV that was developed was found to have a maximum net energy gain of 34.5% over a conventional solar powered version of the UAV. The minimum net energy gain of the solar tracking UAV was found to be 0.8%.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Barbosa, José Nilton Tavares. "PV inverters for module level applications." Master's thesis, FCT-UNL, 2011. http://hdl.handle.net/10362/7083.

Повний текст джерела

Анотація:

Dissertação para obtenção do Grau de Mestre em Energias Renováveis – Conversão Eléctrica e Utilização Sustentáveis
Nowadays, the photovoltaic (PV) energy is presented as one of the most promising source of clean energy, and so a good way for greenhouse gas emissions mitigation and reduce the fossil fuel dependence. Within it, the photovoltaic energy has caused a huge interest in the electronic converters, and the need to improve their efficiency and reducing their cost. With this work I present a solution for a module scale grid-connected single-phase inverter. The solution consists in a two-stage inverter insolated with a grid line transformer. The two-stage inverter is composed by a DC-DC converter and a DC-AC converter connected through a DC-link capacitor. The DC-DC converter in case is a boost converter used to elevate the voltage from the PV module to a higher level. For the DC-AC converter it is used a full-bridge inverter, and both the DC-DC and the DC-AC converters use the IGBTs form an integrated module with its respective drivers. To the boost control it is implemented a Maximum Power Point Tracking algorithm that can optimize the power extraction from the PV source and for the inverter it is used a sliding mode hysteretic control. Once this inverter is conceived to work connected to the grid, a single-phase PLL system is used to synchronize the injected current to grid voltage. All the control part is made digitally using an Arduino Uno board, which uses an Atmel microcontroller.

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Gaptia, Maï Moussa Lawan. "Gestion optimale d'énergie électrique à partir des sources d'énergies renouvelables dédiées aux sites isolés Power control for decentralized energy production system based on the renewable energies — using battery to compensate the wind/load/PV power fluctuations Three level Neutral-Point-Clamped Inverter Control Strategy using SVPWM for Multi-Source System Applications Wind turbine and Batteries with Variable Speed Diesel Generator for Micro-grid Applications." Thesis, Normandie, 2019. http://www.theses.fr/2019NORMLH28.

Повний текст джерела

Анотація:

Les travaux de thèse s’inscrivent dans les problématiques des travaux de recherche de l’équipe thématique : Maitrise des Energies Renouvelables et systèmes de Stockage (MERS) du laboratoire GREAH-EA3220. Ils englobent le dimensionnement des éléments constitutifs du système et la gestion optimale de l’énergie électrique pour un système hybride (Diesel à vitesse variable, Eolien, PV et Batteries) dédié aux sites isolés. Les sources de production d'énergie alimentent des charges par le biais de convertisseurs multi-niveaux d’électronique de puissance. Le groupe électrogène comportant un moteur diesel à vitesse variable est considéré comme la principale source d’énergie utilisée pour contrôler la tension continue du point de couplage. Ce type de groupe électrogène est choisi pour optimiser la consommation du carburant. Il est sollicité pour délivrer une puissance électrique compatible avec le régime du moteur qui supporte mal les variations fréquentes et rapides. Les sources d’énergie renouvelables dont on cherche à augmenter la part d’énergie pour satisfaire la demande sont pilotées de manière à extraire instantanément le maximum de puissances disponible par les ressources (ensoleillement, vent). Celles-ci imposent ainsi leurs dynamiques et leurs intermittences au point de couplage. Le pack des batteries sert à compenser les fluctuations rapides de l’énergie provenant des sources d’énergie renouvelables par rapport à une évolution plus lente prise en charge par le groupe électrogène. La gestion des interactions au sein du système électrique hybride résultant est assurée au moyen de convertisseurs statiques multi-niveaux (AC / DC, DC / DC et DC / AC). Une approche de gestion d’énergie électrique fondée sur la répartition fréquentielle des perturbations induites au point de couplage par les sources renouvelables. Une plateforme expérimentale à échelle réduite (1/22) a été développée pour valider expérimentalement les approches théoriques et les simulations. Les résultats de simulations obtenus dans l’environnement logiciel Matlab/Simulink/SimPowerSystems et ceux issus du dispositif expérimental réalisé et piloté par dSPACE-1104 prouvent l’adéquation des méthodes de contrôle proposées
The thesis works are part of the research work of the thematic team: Mastery of Renewable Energies and Storage Systems (MERS) of the GREAH-EA3220 laboratory. They include the dimensioning of the constituent elements of the system and the optimal management of electrical energy for a hybrid system (Variable speed Diesel, Wind, PV and Batteries) dedicated to isolated sites. Power sources supply loads through multi-level converters of power electronics. The generator set with a variable speed diesel engine is considered to be the main source of energy used to control the DC voltage at the coupling point. This type of generator is chosen to optimize fuel consumption. It is used to deliver an electrical power compatible with the engine speed which does not tolerate frequent and rapid variations. Renewable energy sources whose share of energy is sought to meet demand are managed so as to instantly extract the maximum power available from resources (sunshine, wind). These thus impose their dynamics and their intermittences at the coupling point. The battery pack is used to compensate for rapid fluctuations in energy from renewable energy sources compared to a slower evolution supported by the generator. Interactions within the resulting hybrid electrical system are managed by means of multi-level static converters (AC / DC, DC / DC and DC / AC). An electrical energy management approach based on the frequency distribution of disturbances induced at the coupling point by renewable sources. An experimental platform on a reduced scale (1/22) has been developed to experimentally validate theoretical approaches and simulations. The results of simulations obtained in the Matlab / Simulink / SimPowerSystems software environment and those from the experimental device produced and piloted by dSPACE-1104 prove the adequacy of the proposed control methods

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Bouzoukas, Asterios. "New approaches for cooling photovoltaic/thermal (PV/T) systems." Thesis, University of Nottingham, 2008. http://eprints.nottingham.ac.uk/11148/.

Повний текст джерела

Анотація:

Today the majority of UK's energy needs are met by fossil fuels. An energy sector that uses 30% of this energy and generates 28% of the total emissions is domestic sector. To reduce the emissions generated by fossil fuels UK government decided to increase the energy coming from renewable sources by 2020. A renewable energy that can contribute is solar energy. Solar thermal collectors and photovoltaics are two means of transforming solar energy to thermal and electrical energy. The limited space in the roofs and the cost of the technologies will prevent families to use both systems together in their roof A hybrid energy system combine the use of two or more alternative power sources will help to increase the system's total efficiency. The photovoltaic/thermal (PV/T) system is a hybrid structure that converts part of the sun's radiation to electricity and part to thermal energy. This research work focuses on the production of new approaches on hybrid PV/T systems. PV/T systems using water and air have been introduced and a literature review conducted in order to identify positives and negatives of these systems. Experiments also conducted by using water and air as heat transfer medium, and the results helped to work as a benchmark performance to the new approaches. These technologies were heat pipes, phase change materials and micro encapsulated phase change materials. The technologies exist for years but their use in the specific application is new. A literature review was undertaken to provide an understanding of these technologies and identified findings that have contributed to the design of the systems. Experimental work was carried out incorporating these technologies in the rear of a PV and the results indicated comparable performance with PV/T-water and PV/Tair. Five performance indicators were employed to help with the comparison of the systems. These were electrical and thermal efficiency, the total energy efficiency, the primary energy saving efficiency and the exergy efficiency. From these five indicators the primary energy saving efficiency that shows how much fossil fuel is saved and the exergy efficiency that could give the optimum working conditions of each system was the most valuable ratings. For the PV/PCM model a new simulation program was developed to help validate the experimental work. Also an environmental and economic study was undertaken to compare if the new systems could help reduce the C02 emissions and if they were feasible to become commercial products. Finally the conclusions gained have been presented and recommendations fo r future work have been made.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Koubli, Eleni. "Impact of data quality on photovoltaic (PV) performance assessment." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/27508.

Повний текст джерела

Анотація:

In this work, data quality control and mitigation tools have been developed for improving the accuracy of photovoltaic (PV) system performance assessment. These tools allow to demonstrate the impact of ignoring erroneous or lost data on performance evaluation and fault detection. The work mainly focuses on residential PV systems where monitoring is limited to recording total generation and the lack of meteorological data makes quality control in that area truly challenging. Main quality issues addressed in this work are with regards to wrong system description and missing electrical and/or meteorological data in monitoring. An automatic detection of wrong input information such as system nominal capacity and azimuth is developed, based on statistical distributions of annual figures of PV system performance ratio (PR) and final yield. This approach is specifically useful in carrying out PV fleet analyses where only monthly or annual energy outputs are available. The evaluation is carried out based on synthetic weather data which is obtained by interpolating from a network of about 80 meteorological monitoring stations operated by the UK Meteorological Office. The procedures are used on a large PV domestic dataset, obtained by a social housing organisation, where a significant number of cases with wrong input information are found. Data interruption is identified as another challenge in PV monitoring data, although the effect of this is particularly under-researched in the area of PV. Disregarding missing energy generation data leads to falsely estimated performance figures, which consequently may lead to false alarms on performance and/or the lack of necessary requirements for the financial revenue of a domestic system through the feed-in-tariff scheme. In this work, the effect of missing data is mitigated by applying novel data inference methods based on empirical and artificial neural network approaches, training algorithms and remotely inferred weather data. Various cases of data loss are considered and case studies from the CREST monitoring system and the domestic dataset are used as test cases. When using back-filled energy output, monthly PR estimation yields more accurate results than when including prolonged data gaps in the analysis. Finally, to further discriminate more obscure data from system faults when higher temporal resolution data is available, a remote modelling and failure detection framework is ii developed based on a physical electrical model, remote input weather data and system description extracted from PV module and inverter manufacturer datasheets. The failure detection is based on the analysis of daily profiles and long-term PR comparison of neighbouring PV systems. By employing this tool on various case studies it is seen that undetected wrong data may severely obscure fault detection, affecting PV system s lifetime. Based on the results and conclusions of this work on the employed residential dataset, essential data requirements for domestic PV monitoring are introduced as a potential contribution to existing lessons learnt in PV monitoring.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Asgharzadeh, Shishavan Amir. "Bifacial photovoltaic (PV) system performance modeling utilizing ray tracing." Diss., University of Iowa, 2019. https://ir.uiowa.edu/etd/6911.

Повний текст джерела

Анотація:

Bifacial photovoltaics (PV) is a promising technology which allows solar cells to absorb light and generate power from both front and rear sides of the cells. Bifacial PV systems generate more power per area compared to their monofacial counterparts because of the additional energy generated from the backside. However, modeling the performance of bifacial PV systems is more challenging than monofacial systems and industry requires novel and accurate modeling tools to understand and estimate the benefit of this technology. In this dissertation, a rigorous model utilizing a backward raytracing software tool called RADIANCE is developed, which allows accurate irradiance modeling of the front and rear sides of the bifacial PV systems. The developed raytracing model is benchmarked relative to other major bifacial irradiance modeling tools based on view-factor model. The accuracy of the irradiance models is tested by comparing with the measured irradiance data from the sensors installed on various bifacial PV systems. Our results show that the raytracing model is more accurate in modeling backside irradiance compared to the other irradiance models. However, this higher accuracy comes at a cost of higher computational time and resources. The raytracing model is also used to understand the impact of different installation parameters such as tilt angle, height above the ground, albedo and size of the south-facing fixed-tilt bifacial PV systems. Results suggest bifacial gain has a linear relationship with albedo, and an increasing saturating relationship with module height. However, the impact of tilt angle is much more complicated and depends on other installation parameters. It is shown that larger bifacial systems may have up to 20º higher optimum tilt angle compared to small-scale systems. We also used the raytracing model to simulate and compare the performance of two common configurations for bifacial PV systems: optimally tilted facing south/north (BiS/N) and vertically installed facing east/west (BiE/W). Our results suggest that in the case of no nearby obstruction, BiS/N performs better than BiE/W for most of the studied locations. However, the results show that for high latitude locations such as Alaska, having a small nearby obstruction may result in having better yield for vertical east-facing system than south-facing tilted system. RADIANCE modeling tool is also used in combination of a custom tandem device model to simulate the performance of tandem bifacial PV systems. Modeling results suggest that while the energy gain from bifacial tandem systems is not high, range of suitable top-cell bandgaps is greatly broadened. Therefore, more options for top-cell absorber of tandem cell are introduced.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Vrzal, Martin. "Optimalizace návrhu velikosti PV systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254209.

Повний текст джерела

Анотація:

The master thesis deals with proposal of size optimization of PV systems. According to results of optimization, alternative solutions of photovoltaic system were proposed for family house. From the perspective of costs efficiency were compared investment costs and savings of implementation of electricity supply directly to private consumption. Particularly for each of the proposed solution, profitability assessment of comparing purchasing costs and returns on investment was performed. Theoretical part of the master thesis consists of introduction into solar radiation principles, structure and functionality of photovoltaic systems, electronics inverters and accumulation of electric energy. The practical part is focused on measuring of electricity consumption in particular family house, calculation of sunlight intensity hitting tested house, making various solutions of photovoltaic power plants placed on the family house in order to evaluate returns on investments. In conclusion are summarized all results of investigated solutions according to economics aspects.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Oller, Westerberg Amelia. "Revising installed photovoltaic capacities on emerging markets by analysing customs data." Thesis, Uppsala universitet, Byggteknik och byggd miljö, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-438780.

Повний текст джерела

Анотація:

The global solar PV market is growing fast, and so is the production and trade with photovoltaic products and peripherals. Until now, the largest development has taken place in highly developed and electrified countries with good administrative control over their electricity system. Recently, however, new markets in developing countries have become increasingly relevant in terms of market share, system sizes and installed capacities. Statistics from these types of countries are often weak or non-existent, leading to problems for global organizations such as the International Energy Agency (IEA) or the International Renewable Energy Agency (IRENA), whose task is to follow, analyze and document named development. In this report, a method is presented in which customs data monitored by the ‘Market Analysis and Research’ section of the International Trade Centre, an agency of UN’s World Trade Organization, is analyzed and converted into annual installed PV capacity volumes. By complementing the basic data from the customs database with price statistics from IEA PVPS task 1 along with national module production data from IEA PVPS task 1 and the RTS cooperation a data conversion is executed. The method has been improved incrementally, where different assumptions have been modified or added, so that the data conversion of exported and imported PV products, expressed in dollar per yearly quarter, match the official statistics of annual installed capacity for a number of reference countries with comprehensive PV capacity statistics. The sensitivity analysis shows that the method is sensitive to the accuracy of the annual domestic national PV module production data and to price changes of Chinese PV modules. For countries with accurate PV module production data, or countries with no module production, the method seems to be able to estimate the annual installed capacity in 2018 with an average difference of 21% and a maximum difference of ±38% and a total average difference of 12%, 17% and 11% for 2016, 2017 and 2018 respectively. By implementing this method, an estimate on yearly installed capacities can be generated in all countries connected to the UN customs database and where the domestic module production is known. This gives the opportunity to at least get an assessment of how much PV that has been installed in developing countries that lack official statistics about their domestic PV market. The regions with the lowest existing data coverage in the world have been determined to be Africa and the Middle East. When applying the method on countries in Africa and the Middle East, larger capacities than the reference data were obtained.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Pande, Sohum, and Raj Bhaladhare. "Different Photovoltaic Penetration Rates for the Planned Area of Jakobsgardarna in Borlange, Sweden." Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-28185.

Повний текст джерела

Анотація:

The municipality of Borlange is planning to build a new modern, social and an ecologically sustainable district due to an increase in the city’s population. Over 1200 homes shall be built for people from all sections of the society. Due to such high levels of migration into the city, it is of utmost importance for the society to ensure that all the new constructions would be energy efficient and focused towards the goal of creating a sustainable society. The main objective of this study is to understand the importance of planning for Photovoltaics (PV) in new areas and performing a series of simulations for different scenarios with varying degrees of PV penetration for the planned residential area of Jakobsgardarna in Borlänge, Sweden. This was achieved by determining the load profiles for all buildings by thorough investigation over the previous works in the analysis of household demand loads and calculating the available roof area in several orientations with the help of model maps drawn to scale. Due to varied types of roofs and their structures, it was assumed that all buildings have a similar roof structure i.e. tilted roofs having a tilt of 30°. Batch simulation was performed in PVSyst for a base case scenario which provides the reference point for determining the total PV power and the total PV output in all orientations. The PV penetration is measured in terms of energy by dividing the total PV output with the annual demand load. Various scenarios of PV penetration are created based on the available roof areas at particular roof orientations. It can be observed that the level of PV penetration is highly dependent on the orientation of roofs. A 17% of PV penetration is observed when PV is installed only on South-facing roofs while the PV penetration reduces drastically to 9% when PV is installed only on East-West facing roofs even though there isn’t a linear reduction in the available roof area.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Trapani, Kim. "FLEXIBLE FLOATING THIN FILM PHOTOVOLTAIC (PV) ARRAY CONCEPT FOR MARINE AND LACUSTRINE ENVIRONMENTS." Thesis, Laurentian University of Sudbury, 2014. https://zone.biblio.laurentian.ca/dspace/handle/10219/2199.

Повний текст джерела

Анотація:

The focus of the research is on the development of the concept of floating flexible thin film arrays for renewable electricity generation, in marine and lacustrine application areas. This research was motivated by reliability issues from wave energy converters which are prone to large loads due to the environment which they are exposed in; a flexible system would not need to withstand these loads but simply yield to them. The solid state power take off is an advantage of photovoltaic (PV) technology which removes failure risks associated with mechanical machinery, and also potential environmental hazards such as hydraulic oil spillage. The novelty of this technology requires some development before it could even be considered feasible for large scale installation. Techno-economics are a big issue in electricity developments and need to be scoped in order to ensure that they would be cost-competitive in the market and with other technologies. Other more technical issues relate to the change in expected electrical yield due to the modulation of the PV array according to the waves and the electrical performance of the PVs when in wet conditions. Results from numerical modelling of the modulating arrays show that there is not expected variation in electrical yield at central latitudes (slightly positive), although at higher latitudes there could be considerable depreciation. With regards to the electrical performance a notable improvement was measured due to the cooling effect, slight decrease in performance was also estimated due to water absorption (of ~ 1.4%) within the panels. Overall results from both economic and technical analysis show the feasibility of the concept and that it is a possibility for future commercialisation.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Strobel, Matthias Benjamin. "Performance of high-efficiency PV systems in a maritime climate." Thesis, University of Reading, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.497118.

Повний текст джерела

Анотація:

A unique measurement system is designed and installed to investigate the performance of high-efficiency PV systems in a high latitude maritime climate. Continuous monitoring of DC and AC currents and voltages of several inverters connected to modules of the latest generation of high-efficiency PV technologies is combined with full I-V characteristics of each module alongside high-resolution meteorological data.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Lopez, Ramirez Izar. "Operating correction factor of PV system : Effects of temperature, angle of incidence and invertor in PV system performance." Thesis, Högskolan i Gävle, Energisystem, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-23671.

Повний текст джерела

Анотація:

In this project, the correction factor of different solar panels of the laboratory of the University of Gävle, located in Sweden, is going to evaluated. The solar modules’working conditions are different from the ones used to test them in the laboratory. In the laboratory. the output energy of the modules is less than in working conditions,and therefore a correction factor is going to be calculated from the data collected, inorder to describe the factors that affect the performance of the solar modules.Also, the obtained correction factor validity for different PV systems it is going to be examined, determining which system has a better correction factor and the energy losses due to temperature, angle of incidence and micro invertor.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Umana, Aniemi. "Module-level autonomous settingless protection and monitoring for standalone and grid-connected photovoltaic array systems using quadratic integration modeling." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/54441.

Повний текст джерела

Анотація:

This research applies a recently developed dynamic state-estimation based protection scheme, the settingless protection, to the photovoltaic (PV) industry for the first time. At this time, the proposed protection algorithm has been implemented on traditional protection zones for individual power system devices, but this research extends this protection to a microgrid, specifically, a system of PV network composed of several PV modules. Several illustrative examples on various anomalies such as high impedance faults and shorted-out PV modules have been provided to demonstrate the effectiveness of this protection scheme. The detection of these anomalies has been demonstrated in the presence of changing atmospheric conditions, and with the operation of maximum power point tracking (MPPT) equipped dc-dc converters. This protection scheme requires an accurate model of the PV module, therefore, a two-diode PV model has been developed using quadratic integration modeling. In this PV model development, a scaling factor is applied to the Taylor series expansion of the exponential terms of the model of the PV module. Then the higher order terms of the Taylor series expansion are reduced to at most second order terms using the quadratization technique. Furthermore, a novel approach for extracting the PV parameters, namely, the ideality constants, leakage currents, PV module internal current, shunt and series resistances, has been presented. A comparison was performed between numerically generated data using the determined PV module parameters and data measurements from a physical PV module. It was shown that the maximum error from this comparison was below 0.12A, and less than 0.05A around the maximum power point region of the PV modules used for this research. The residual data from the PV array protection scheme has been used to develop a method for identifying the location of faulted PV modules. Also, condition-based monitoring of the PV array system has also been presented with examples. From the PV array system monitoring, the shading and underperformance of a PV module have been identified. From the contributions of this research, an accurate module of the PV array has been developed in a form that can be integrated with other power system devices. This accurate module can be used for state estimation of the PV array, load flow analysis, short circuit analysis, and other power system analytical studies. Also, by determining the location of the faulted PV module, the time to identify this faulted PV module in a large PV installation is drastically reduced. Lastly, by identifying shading conditions and underperforming PV modules, the PV system operator can quickly bring the underperforming module or modules to optimal performance, thereby, maximizing the power yield of the PV array, and maximizing the revenue of the PV system owner.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Makki, Adham. "Innovative heat pipe-based photovoltaic/thermoelectric (PV/TEG) generation system." Thesis, University of Nottingham, 2017. http://eprints.nottingham.ac.uk/43330/.

Повний текст джерела

Анотація:

PV systems in practice experience excessive thermal energy dissipation that is inseparable from the photo-electric conversion process. The temperature of PV cells under continuous illumination can approach 40°C above ambient, causing a drop in the electrical performance of about 30%. The significance of elevated temperature on PV cells inspired various thermal management techniques to improve the operating temperature of the cells and hence their conversion efficiency. Hybrid PV/Thermal (PV/T) collectors that can supply both electrical and thermal energy are attractive twofold solution, being able to cool the PV cells and thus improving the electrical power output as well as collecting the thermal energy by-product for practical utilization. The challenges present on the performance of PV systems due to elevated operating temperature is considered the research problem within this work. In this research, an integrated hybrid heat pipe-based PV/Thermoelectric (PV/TEG) collector is proposed and investigated theoretically and experimentally. The hybrid collector considers modular integration of a PV absorber rated at 170W with surface area of 1.3 m2 serving as power generator as well as thermal absorber. Five heat pipes serving as the heat transport mediums were attached to the rear of the module to extract excessive heat accumulating on the PV cells. The extracted heat is transferred via boiling-condensation cycle within the heat pipe to a bank of TEG modules consisting of five 40 mm x 40 mm modules, each attached to the condenser section of each heat pipe. In principle, the incorporation of heat pipe-TEG thermal waste recovery assembly allow further power generation adopting the Seebeck phenomena of Thermoelectric modules. A theoretical numerical analysis of the collector proposed is conducted through derivation of differential equations for the energy exchange within the system components based on energy balance concepts while applying explicit finite difference numerical approach for solutions. The models developed are integrated into MATLAB/SIMULINK environment to assess the cooling capability of the integrated collector as well as the addition power generation through thermal waste heat recovery. The practical performance of the collector proposed is determined experimentally allowing for validation of the simulation model, hence, a testing rig is constructed based on the system requirements and operating principles. Reduction in the PV cell temperature of about 8°C, which account for about 16% reduction in the PV cell temperature response compared to a conventional PV module under identical conditions is attained. In terms of the power output available from the PV cells, enhanced power performance of additional 5.8W is observed, contributing to an increase of 4% when compared with a PV module. The overall energy conversion efficiency of the integrated collector was observed to be steady at about 11% compared to that of the conventional PV module (9.5%) even at high ambient temperature and low wind speeds. Parametric analysis to assess the performance enhancements associated to the number of heat pipes attached to the PV module is conducted. Increasing the number of heat pipes attached to 15 pipes permits improved thermal management of the PV cells realised by further 7.5% reduction in the PV module temperature in addition to electrical output power improvement of 5%.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Sommerfeld, Jeffrey. "Residential customers and adoption of solar PV." Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/98508/4/Jeffrey_Sommerfeld_Thesis.pdf.

Повний текст джерела

Анотація:

Policies encouraging consumer use of solar photovoltaic (PV) are promoted to reduce the impacts of climate change. To maximise benefits, the role of the consumer is critical as their adoption and use of renewable energy technology may, or may not, align with policy objectives of the energy professionals. The contribution of this research is it provides a better understanding of consumer interaction with solar PV technology. From this understanding, policy options can be developed and/or adapted to address technical and/or human-related issues that impact on the effectiveness of solar PV policy aimed at reducing peak demand and creating low carbon communities.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Foreman, Mark McKinney. "Control and operation of SMES and SMES/PV systems." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-10062009-020156/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Rakotomananandro, Falinirina F. "Study of Photovoltaic System." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306285848.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Manhal, Ali, and Ali Tammam M. "Solar Tent : A Photovoltaic Generator Model for a Flexible Fabric with Inbuilt Cells." Thesis, Högskolan Dalarna, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:du-30552.

Повний текст джерела

Анотація:

Natural disasters and conflicts in many different parts of the world force thousands of people to get displaced from their homes and live in refugee camps temporarily or permanently. For refugee families, lack of energy access has great impact on their lives. Tarpon Solar Company has developed a solar tent which is a combination of laminated cloth and flexible solar cells. In addition to producing renewable electricity, it can create a comfortable outdoor shelter from sun, rain and wind. The aims of this study were to define and size the solar system of the tent in both AC and DC systems and optimize the tent to work in different locations around the world. Besides designing a monitoring system for the solar tent to evaluate the performance. In addition, defining the social aspect and the consumer behavior for a better solar tent future design. As a case study, Tarpon AC solar tent in Glava, Sweden has been installed to cover the basic needs of the tent users. To understand the solar tent performance in different weather zones, 4 different locations were suggested. A monitor system was designed to monitor the tent solar system performance. The simulation software PVsyst was used to size the PV system in the different locations with different solar data. The PVsyst simulation results showed that the current Tarpon solar tent with 32 photovoltaic modules is extremely oversized to cover the basic needs loads (Lighting, mobile charging and ventilation) in the emergency cases. The current Tarpon solar tent has a standard number of photovoltaic modules integrated in the tent fabric while the photovoltaic modules number should vary from one location to another according to the weather data and solar irradiation. In this case the current Tarpon solar system used in Glava, Sweden can be optimized by decreasing the number of photovoltaic modules to only 6 photovoltaic modules instead of 32 modules. The study also shows that the features of the off-grid system components (battery and charge controller) are different from one location to another according to the criteria of selection. This study concludes that for the temporary short-term emergency use of the tent where only basic needs loads are needed, DC system is better than AC system in terms of energy efficiency, system size and cost in the different proposed locations. While AC system is better when using the tent for prolonged time in terms of user flexibility and ability to extend the system. Understanding the consumer behavior and the goal of the tent whether to be used for an emergency short term shelter or a permanent shelter for a prolonged time are important factors for a better solar tent design.

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Almingol, Oscar. "Construction of a C-PV prototype." Thesis, Högskolan i Gävle, Elektronik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-25083.

Повний текст джерела

Анотація:

The following Master Thesis will talk about a C-PV prototype using bifacial PV technology, based on the Solarus Collector. The Solarus Collector consists in two PV cells built on a metallic receiver, where there are some water channels flowing through it, allowing to cool down the PV cells, thus increasing their efficiency. The collector also presents a reflector to provide irradiance to the back part of the receiver, where the other PV cells are located. The new prototype will present bifacial PV cells but not a metallic receiver. This construction aims to reduce the price of the receiver, but will not have a system to cool down the solar cells. This Master Thesis will be developed in the Solarus facilities, in collaboration with the Solarus members. In order to grasp an idea of this prototype, two main procedures will be done. Regarding the bifacial technology, a bifacial PV module will be measured under different conditions, depending on which sides can be illuminated or shaded. On the other hand, a thermodynamic simulation will be carried out on different geometries of the reflector and receiver, in order to figure out the evolution of the temperatures on the new prototype. This simulation will be done with a finite element method, widely known in this applications. The results will show several problems concerning this prototype. Although the measurements of the bifacial PV module will result beneficial and informative, the problem with the temperature will tend to back down this prototype. The lack of some system to cool down the bifacial cells will imply that the receiver could reach unacceptable temperatures. This hypothesis will be drawn under some specific conditions, so they will not be completely devastating to the idea of using bifacial cells, but perhaps a different approach should be used in case it is desired to continue this work.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Wu, Yuechen, Shelby Vorndran, Pelaez Silvana Ayala, and Raymond K. Kostuk. "Three junction holographic micro-scale PV system." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622714.

Повний текст джерела

Анотація:

In this work a spectrum splitting micro-scale concentrating PV system is evaluated to increase the conversion efficiency of flat panel PV systems. In this approach, the dispersed spectrum splitting concentration systems is scaled down to a small size and structured in an array. The spectrum splitting configuration allows the use of separate single bandgap PV cells that increase spectral overlap with the incident solar spectrum. This results in an overall increase in the spectral conversion efficiency of the resulting system. In addition other benefits of the micro-scale PV system are retained such reduced PV cell material requirements, more versatile interconnect configurations, and lower heat rejection requirements that can lead to a lower cost system. The system proposed in this work consists of two cascaded off-axis holograms in combination with a micro lens array, and three types of PV cells. An aspherical lens design is made to minimize the dispersion so that higher concentration ratios can be achieved for a three-junction system. An analysis methodology is also developed to determine the optical efficiency of the resulting system, the characteristics of the dispersed spectrum, and the overall system conversion efficiency for a combination of three types of PV cells.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Chen, Baifeng. "High-efficiency Transformerless PV Inverter Circuits." Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/56686.

Повний текст джерела

Анотація:

With worldwide growing demand for electric energy, there has been a great interest in exploring photovoltaic (PV) sources. For the PV generation system, the power converter is the most essential part for the efficiency and function performance. In recent years, there have been quite a few new transformerless PV inverters topologies, which eliminate the traditional line frequency transformers to achieve lower cost and higher efficiency, and maintain lower leakage current as well. With an overview of the state-of-the-art transformerless PV inverters, a new inverter technology is summarized in the Chapter 2, which is named V-NPC inverter technology. Based this V-NPC technology, a family of high efficiency transformerless inverters are proposed and detailly analyzed. The experimental results demonstrate the validity of V-NPC technology and high performance of the transformerless inverters. For the lower power level transformerless inverters, most of the innovative topologies try to use super junction metal oxide semiconductor field effect transistor(MOSFET) to boost efficiency, but these MOSFET based inverter topologies suffer from one or more of these drawbacks: MOSFET failure risk from body diode reverse recovery, increased conduction losses due to more devices, or low magnetics utilization. By splitting the conventional MOSFET based phase leg with an optimized inductor, Chapter 3 proposes a novel MOSFET based phase leg configuration to minimize these drawbacks. Based on the proposed phase leg configuration, a high efficiency single-phase MOSFET transformerless inverter is presented for the PV micro-inverter applications. The PWM modulation and circuit operation principle are then described. The common mode and differential mode voltage model is then presented and analyzed for circuit design. Experimental results of a 250 W hardware prototype are shown to demonstrate the merits of the proposed MOSFET based phase-le and the proposed transformerless inverter. New codes require PV inverters to provide system regulation and service to improve the distribution system stabilization. One obvious impact on PV inverters is that they now need to have reactive power generation capability. The Chapter 4 improves the MOFET based transformerless inverter in the Chapter 3 and proposed a novel pulse width modulation (PWM) method for reactive power generation. The ground loop voltage of this inverter under the proposed PWM method is also derived with common mode and differential mode circuit analyses, which indicate that high-frequency voltage component can be minimized with symmetrical design of inductors. A 250-W inverter hardware prototype has been designed and fabricated. Steady state and transient operating conditions are tested to demonstrate the validity of improved inverter and proposed PWM method for reactive power generation, high efficiency of the inverter circuit, and the high-frequency-free ground loop voltage. Besides the high efficiency inverter circuit, the grid connection function is also the essential part of the PV system. The Chapter 5 present the overall function blocks for a grid-connected PV inverter system. The current control and voltage control loop is then analyzed, modeled, and designed. The dynamic reactive power generation is also realized in the control system. The new PLL method for the grid frequency/voltage disturbance is also realized and demonstrate the validity of the detection and protection capability for the voltage/frequency disturbance. At last, a brief conclusion is given in the Chapter 6 about each work. After that, future works on device packaging, system integration, innovation on inverter circuit, and standard compliance are discussed.
Ph. D.

Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "Photovoltaic (PV) panels(PV)"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями