Добірка наукової літератури з теми "Phase transforming cellular materials"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Phase transforming cellular materials".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Phase transforming cellular materials"
Restrepo, David, Nilesh D. Mankame, and Pablo D. Zavattieri. "Phase transforming cellular materials." Extreme Mechanics Letters 4 (September 2015): 52–60. http://dx.doi.org/10.1016/j.eml.2015.08.001.
Повний текст джерелаAljabi, Nadia. "Phase Transforming Cellular Materials (PXCMs) Design and Assembly." Journal of Purdue Undergraduate Research 6, no. 1 (2016): 86. http://dx.doi.org/10.5703/1288284316203.
Повний текст джерелаPollalis, William, Prateek Shah, Yunlan Zhang, Nilesh Mankame, Pablo Zavattieri, and Santiago Pujol. "Dynamic response of a Single-Degree-of-Freedom system containing Phase Transforming Cellular Materials." Engineering Structures 275 (January 2023): 115205. http://dx.doi.org/10.1016/j.engstruct.2022.115205.
Повний текст джерелаPeddireddy, Karthik, Simon Čopar, Khoa V. Le, Igor Muševič, Christian Bahr, and Venkata S. R. Jampani. "Self-shaping liquid crystal droplets by balancing bulk elasticity and interfacial tension." Proceedings of the National Academy of Sciences 118, no. 14 (March 31, 2021): e2011174118. http://dx.doi.org/10.1073/pnas.2011174118.
Повний текст джерелаOmarizadeh, Khaled, Mohammad Reza Farahpour, and Mahshid Alipour. "Topical Administration of an Ointment Prepared From Satureja sahendica Essential Oil Accelerated Infected Full-Thickness Wound Healing by Modulating Inflammatory Response in a Mouse Model." Wounds : a compendium of clinical research and practice 33, no. 12 (December 10, 2021): 321–28. http://dx.doi.org/10.25270/wnds/321328.
Повний текст джерелаYarov, Yuriy. "Intensity and duration of phases of wound healing after surgical intervention in сases of spontaneous periodontitis accompanied by various reactivity of the body". ScienceRise: Medical Science, № 2(41) (5 квітня 2021): 38–42. http://dx.doi.org/10.15587/2519-4798.2021.228287.
Повний текст джерелаLiu, Jingran, Huasong Qin, and Yilun Liu. "Dynamic behaviors of phase transforming cellular structures." Composite Structures 184 (January 2018): 536–44. http://dx.doi.org/10.1016/j.compstruct.2017.10.002.
Повний текст джерелаBhattacharya, Kaushik, and Georg Dolzmann. "Relaxed constitutive relations for phase transforming materials." Journal of the Mechanics and Physics of Solids 48, no. 6-7 (June 2000): 1493–517. http://dx.doi.org/10.1016/s0022-5096(99)00093-9.
Повний текст джерелаTodoriko, L. D., and Ya I. Toderika. "The role of melatonin in the formation of tuberculotic inflammation, forecast regarding the influence on the effectiveness of treatment in the conditions of the COVID-19 pandemic (literature review)." Tuberculosis, Lung Diseases, HIV Infection, no. 4 (December 5, 2022): 36–44. http://dx.doi.org/10.30978/tb2022-4-36.
Повний текст джерелаPurohit, P. "Dynamics of strings made of phase-transforming materials." Journal of the Mechanics and Physics of Solids 51, no. 3 (March 2003): 393–424. http://dx.doi.org/10.1016/s0022-5096(02)00097-2.
Повний текст джерелаДисертації з теми "Phase transforming cellular materials"
Vázquez, Diosdado Jorge Alberto. "A cellular automata approach for the simulation and development of advanced phase change memory devices." Thesis, University of Exeter, 2012. http://hdl.handle.net/10036/4141.
Повний текст джерелаWingkono, Gracy A. "Combinatorial Technique for Biomaterial Design." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7264.
Повний текст джерелаFrascone, Patrick. "Phase transforming metals as negative stiffness inclusions in composite materials." 2004. http://catalog.hathitrust.org/api/volumes/oclc/58525963.html.
Повний текст джерела(8045321), Yunlan Zhang. "Stress- and Temperature-Induced Phase Transforming Architected Materials with Multistable Elements." Thesis, 2019.
Знайти повний текст джерелаArchitected materials are a class of materials with novel properties that consist of numerous periodic unit cells. In past investigations, researchers have demonstrated how architected materials can achieve these novel properties by tailoring the features of the unit cells without changing the bulk materials. Here, a group of architected materials called Phase Transforming Cellular Materials (PXCMs) are investigated with the goal of mimicking the novel properties of shape-memory alloys. A general methodology is developed for creating 1D PXCMs that exhibit temperature-induced reverse phase transformations (i.e., shape memory effect) after undergoing large deformations. During this process, the PXCMs dissipate energy but remain elastic (i.e., superelasticity). Next, inspired by the hydration-induced shape recovery of feathers, a PXCM-spring system is developed that uses the superelasticity of PXCMs to achieve shape recovery. Following these successes, the use of PXCMs to resist simulated seismic demands is evaluated. To study how they behave in a dynamic environment and how well their response can be estimated in such an environment, a single degree of freedom-PXCM system is subjected to a series of simulated ground motions. Lastly, the concept of PXCMs is extended into two dimensions by creating PXCMs that achieve superelasticity in two or more directions. Overall, the findings of this investigation indicate that PXCMs: 1) can achieve shape memory and recovery effects through temperature changes, 2) offer a novel alternative to traditional building materials for resisting seismic demands, and 3) can be expanded into two dimensions while still exhibiting superelasticity.
Jing-WeiLien and 連敬偉. "Nanoindentation and micro-compression behavior of multilayers containing phase transforming materials." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/25804921515088300826.
Повний текст джерела國立成功大學
土木工程學系專班
98
Phase-transforming materials, such as vanadium dioxide (VO2) or barium titanate (BaTiO3), are known to be ferroelectric and ferroelastic. Solid-solid phase transformation from one crystal symmetry to another upon varying temperature or external electromagnetic radiation or mechanical stress fields can be triggered. As predicted by Landau’s phenomenological theory of phase transition, the material system is at a high energy state in the vicinity of phase transition. The intent of this study was to determine if high damping and high stiffness (HDHS) composites with nano-scale microstructures could be fabricated and realized with phase-transforming inclusions. Bulk particulate composites composed of similar constituents have been shown to possess extremely high damping and high viscoelastic stiffness, and it is expected that composite with nano-scale microstructure may behave in a similar manner. Micro-pillars were made using Dual Beam Focused Ion Beam (DB-FIB) out of multilayer thin films, and the films were made by sputtering deposition. Nanoindentation and micro-compression experiments were performed on copper thin films, barium titanate (BaTiO3) thin films, Cu/BaTiO3/Cu multi-layered thin films and micro-pillars. Silicon substrates and silicon micro-pillars were also tested for baseline comparison. High temperature, isothermal and heating nanoindentation tests were conducted on fused silica (amorphous SiO2) to verify the capabilities and isothermal of the MTS G200 nanoindenter. To study the tetragonal to cubic phase transformation in BaTiO3, both isothermal and heating experiments were conducted to investigate the phase transformation of single BaTiO3 layers and related Cu/BaTiO3/Cu multilayers. Nanoindentation tests at high temperature for SiO2 showed its hardness was 9 GPa, and Young’s modulus was 70 GPa. From nanoindentation tests, it was found that the hardness and modulus of BaTiO3 single layer thin films were 11 GPa and 170 GPa, respectively. Temperature-induced anomalies in load and displacement signals were observed from the micro-pillar experiments, but not clearly from nanoindentation tests. The phase transformation of the confined barium titanate layer may be responsible for the anomalies. These results provide basic understandings of phase transformation in confined environments. Through TEM analysis, we found crystalline BaTiO3 phases after heating and micro-compression, which may be form due to phase transformation or grain growth. TEM studies of the as-deposited barium titanate films did not show crystalline phases, but the films may still possibly contain a small amount of nanoscale crystalline grains. In addition, it was found that phase transformation temperature was between 40°C (313K) to 80°C (353K), different from the transformation temperature of bulk barium titanate, which is about 600°C (873K). The shift in transformation temperature may be due to stress-induced mechanisms from the geometry and loading conditions. As for stability of the phenomena, it was found that the process took about 0.6 sec. It is possible that phase transformations were occurred in some regions but not detected due to the amount of materials being transformed is not enough to change mechanical loading and displacements.
Chih-ChiehLu and 呂志介. "Mechanical properties of composite materials having solid-solid phase-transforming inclusions." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/17798782154264553246.
Повний текст джерела國立成功大學
土木工程學系碩博士班
101
In this research, two approaches are adopted to study high damping and high stiffness (HDHS) composites. One utilizes the conventional method in the viscoelastic composite theory to combine metallic materials with polymer, and the other adopts the negative-stiffness concept through phase-transforming particulate inclusions such as VO2 and BaTiO3. For the conventional method, the polymers, such as hot melt adhesive (HMA) and polyamide, are embedded into stainless steel, as a core, to form composite materials. Although this may not yield ideal HDHS composites, this approach ensures the outer surface of the composite as stiff and high strength as the metal matrix. Its overall damping is significantly improved, as oppose to its metal counterpart. It is found that, with small amount of polymer inclusion, the steel-polymer composites exhibit large increases in loss tangent, in expense of reducing overall modulus through the identification of resonant peaks in the low frequency regime. Through resonant ultrasound spectroscopy (RUS) experiments, we found that the torsional resonant frequency in relation to the hole size in the steel cubes. For the stainless steel cube with a volume of V=25mm x 25mm x 25mm cube, the constant torsion resonant frequency was around 57 kHz. Loss tangent increases as the volume of polymer increase, and the tan delta of stainless steel with polyamide is larger than that of steel with the HMA inclusion. For the steel-polymer composite with a hole size of 24 mm, its tan delta with polyamide inclusion is 3.952x10^{-2} larger than the hollow stainless steel cube, and is 2.1517x10^{-2} larger than that of steel with HMA inclusion. As for the negative-stiffness composites, the phase-transforming particles are placed in the polymers. Experimental investigations with the resonant ultrasound spectroscopy and dynamic shear rheometer are conducted. Phase-transforming particles in the polymer matrix, in some cases, show increase of damping, but no effects on modulus. It is hypothesized that the stiffness of polymer matrix may not be large enough to dance with the particulate inclusions in the vicinity of phase transformation. However, it is found that polyamide matrix, albeit weak in stiffness, still showed anomalous signals in loss tangent and dynamic modulus around the transformation temperature of the inclusions. By DSR, the polyamide+VO2 (5%) shows anomalous increase in tan delta by about 0.0264, as to all other samples. The amount of inclusions and matrix stiffness must be balanced to observe the anomalies. In addition to mechanical enhancements in the ferroelastic polymer composites, it has been reported in the literature that flexible electronic devices that contain ferroelastic inclusions in polymer matrix may exhibit unusual electrical properties.
Ghoneim, Adam. "Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys." 2011. http://hdl.handle.net/1993/4956.
Повний текст джерелаКниги з теми "Phase transforming cellular materials"
Narlikar, A. V., and Y. Y. Fu, eds. Oxford Handbook of Nanoscience and Technology. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533053.001.0001.
Повний текст джерелаЧастини книг з теми "Phase transforming cellular materials"
Khaddor, Yasser, Abdes-samed Bernoussi, Khalid Addi, Mohamed Byari, and Mustapha Ouardouz. "Modeling Phase Change Materials Using Cellular Automata." In Lecture Notes in Computer Science, 173–84. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14926-9_16.
Повний текст джерелаReisner, G., and F. D. Fischer. "Discretization Concepts for Solid — Solid Phase Transforming Materials." In IUTAM Symposium on Discretization Methods in Structural Mechanics, 273–80. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4589-3_32.
Повний текст джерелаBurbelko, Andriy A., Edward Fraś, Wojciech Kapturkiewicz, and Ewa Olejnik. "Nonequilibrium Kinetics of Phase Boundary Movement in Cellular Automaton Modelling." In Materials Science Forum, 405–10. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-991-1.405.
Повний текст джерелаDeSimone, A. "Pulling Phase-Transforming Bars: A Three-Dimensional Viewpoint." In IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, 67–76. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0297-3_6.
Повний текст джерелаDimaki, Andrey V., and Evgeny V. Shilko. "Theoretical Study of Physico-mechanical Response of Permeable Fluid-Saturated Materials Under Complex Loading Based on the Hybrid Cellular Automaton Method." In Springer Tracts in Mechanical Engineering, 485–501. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_21.
Повний текст джерелаPepys, Mark B. "The acute phase response and C-reactive protein." In Oxford Textbook of Medicine, edited by Timothy M. Cox, 2199–207. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198746690.003.0239.
Повний текст джерелаSole-Gras, Marc, Yong Huang, and Douglas B. Chrisey. "Laser-Induced Forward Transfer of Biomaterials." In Additive Manufacturing in Biomedical Applications, 252–65. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.a0006860.
Повний текст джерелаAraceli, SALAZAR-PERALTA, PICHARDO-SALAZAR José Alfredo, SÁNCHEZ-OROZCO Raymundo, and PICHARDO-SALAZAR Ulises. "Introduction to Metallographic Study." In Handbook Science of Technology and Innovation, 106–29. ECORFAN, 2022. http://dx.doi.org/10.35429/h.2022.3.106.129.
Повний текст джерелаArora, Disha, Sanjay Sharma, and Sumeet Gupta. "Natural Products Targeting Various Mediators in Rheumatoid Arthritis." In Natural Products for the Management of Arthritic Disorders, 135–63. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815050776122010009.
Повний текст джерелаJayaram Pratima, Bichandarkoil, and Namasivayam Nalini. "Efferocytosis: An Interface between Apoptosis and Pathophysiology." In Regulation and Dysfunction of Apoptosis. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.97819.
Повний текст джерелаТези доповідей конференцій з теми "Phase transforming cellular materials"
Chen, Tiegang, Xiaoyong Zhang, Xiaojun Yan, Bin Zhang, Jun Jiang, Shuqing Zhang, Chaoyong Guo, Dawei Huang, and Mingjing Qi. "Phase transforming auxetic material with embedding magnets." In Behavior and Mechanics of Multifunctional Materials XIII, edited by Hani E. Naguib. SPIE, 2019. http://dx.doi.org/10.1117/12.2513906.
Повний текст джерелаLester, Brian T., and Dimitris C. Lagoudas. "Modeling of the Effective Actuation Response of SMA-MAX Phase Composites With Partially Transforming NiTi." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3200.
Повний текст джерелаCampbell, J. E., G. D. Hibbard, and H. E. Naguib. "Design, Fabrication and Mechanical Characterization of Pyramidal Periodic Cellular Metal/Polyurethane Foam Hybrid Materials." In ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-318.
Повний текст джерелаFerrise, Francesco, Monica Bordegoni, Michele Fiorentino, and Antonio E. Uva. "Integration of Realtime Finite Element Analysis and Haptic Feedback for Hands-On Learning of the Mechanical Behavior of Materials." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12924.
Повний текст джерелаGortyshov, Yury F., Igor A. Popov, and Konstantin E. Gulitsky. "Experimental Studies of Hydrodynamics and Heat Transfer in Channels With High-Porous Cellular Materials in Single-Phase Forced Convection and Flow Boiling of Working Fluids." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-1021.
Повний текст джерелаMattern-Schain, Samuel I., Mary-Anne Nguyen, Tayler M. Schimel, James Manuel, Joshua Maraj, Donald Leo, Eric Freeman, Scott Lenaghan, and Stephen A. Sarles. "Totipotent Cellularly-Inspired Materials." In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/smasis2019-5745.
Повний текст джерелаKrittacom, Bundit, and Kouichi Kamiuto. "High-Temperature Emission Characteristics of Open-Cellular Porous Plates." In ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ht2007-32241.
Повний текст джерелаBrahmbhatt, Khushboo, Wujun Zhao, Zhaojie Deng, Leidong Mao, and Eric Freeman. "Magnetically Responsive Droplet Interface Bilayer Networks." In ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/smasis2015-9029.
Повний текст джерелаClarke, Mary Ann D., and Christopher J. Freitas. "N-Phase Interface Tracking Method Based on Prime Enumeration of Microcells." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56136.
Повний текст джерелаMakhoul-Mansour, Michelle M., and Eric C. Freeman. "Photo-Triggered Soft Materials With Differentiated Diffusive Pathways." In ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/smasis2019-5525.
Повний текст джерелаЗвіти організацій з теми "Phase transforming cellular materials"
Wang, Yu U. SISGR -- Domain Microstructures and Mechanisms for Large, Reversible and Anhysteretic Strain Behaviors in Phase Transforming Ferroelectric Materials. Office of Scientific and Technical Information (OSTI), December 2013. http://dx.doi.org/10.2172/1111107.
Повний текст джерела