Добірка наукової літератури з теми "Perovskites and fluorites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Perovskites and fluorites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Perovskites and fluorites"
Zyryanov, V. V., V. A. Sadykov, M. I. Ivanovskaya, J. M. Criado, and S. Neophytides. "Synthesis and sintering of ceramic nanocomposites with high mixed conductivity." Science of Sintering 37, no. 1 (2005): 45–54. http://dx.doi.org/10.2298/sos0501045z.
Повний текст джерелаMitchell, Roger H., Mark D. Welch, and Anton R. Chakhmouradian. "Nomenclature of the perovskite supergroup: A hierarchical system of classification based on crystal structure and composition." Mineralogical Magazine 81, no. 3 (June 2017): 411–61. http://dx.doi.org/10.1180/minmag.2016.080.156.
Повний текст джерелаZyryanov, V. V., N. F. Uvarov, V. A. Sadykov, G. M. Alikina, L. S. Ivashkevich, M. I. Ivanovskaya, and S. Neophytides. "Mechanochemical synthesis, structure, and properties of nanocrystalline metastable perovskites and fluorites for catalytic membrane reactors." Journal of Structural Chemistry 45, S1 (January 2004): S127—S132. http://dx.doi.org/10.1007/s10947-006-0107-0.
Повний текст джерелаZyryanov, V. V. "Mechanism of mechanochemical synthesis of complex oxides and the peculiarities of their nano-structurization determining sintering." Science of Sintering 37, no. 2 (2005): 77–92. http://dx.doi.org/10.2298/sos0502077z.
Повний текст джерелаYe, Ziqing, Junmin Xia, Dengliang Zhang, Xingxing Duan, Zhaohui Xing, Guangrong Jin, Yongqing Cai, Guichuan Xing, Jiangshan Chen, and Dongge Ma. "Efficient Quasi-2D Perovskite Light-Emitting Diodes Enabled by Regulating Phase Distribution with a Fluorinated Organic Cation." Nanomaterials 12, no. 19 (October 6, 2022): 3495. http://dx.doi.org/10.3390/nano12193495.
Повний текст джерелаEglitis, Roberts I., Juris Purans, Anatoli I. Popov, and Ran Jia. "Tendencies in ABO3 Perovskite and SrF2, BaF2 and CaF2 Bulk and Surface F-Center Ab Initio Computations at High Symmetry Cubic Structure." Symmetry 13, no. 10 (October 12, 2021): 1920. http://dx.doi.org/10.3390/sym13101920.
Повний текст джерелаDong, Ningfei, Haosu Zhou, Lei Wang, and Zhihai Liu. "Electron Transport Layer-Free Ruddlesden–Popper Two-Dimensional Perovskite Solar Cells Enabled by Tuning the Work Function of Fluorine-Doped Tin Oxide Electrodes." Crystals 12, no. 8 (August 4, 2022): 1090. http://dx.doi.org/10.3390/cryst12081090.
Повний текст джерелаBlack, Cameron, and Philip Lightfoot. "Crystal structure of guanidinium hexafluoridovanadate(III), (CN3H6)3[VF6]: an unusual hybrid compound related to perovskite." Acta Crystallographica Section C Structural Chemistry 73, no. 3 (February 6, 2017): 244–46. http://dx.doi.org/10.1107/s2053229617001711.
Повний текст джерелаKobayashi, Yoji, Yoshihiro Tsujimoto, and Hiroshi Kageyama. "Property Engineering in Perovskites via Modification of Anion Chemistry." Annual Review of Materials Research 48, no. 1 (July 2018): 303–26. http://dx.doi.org/10.1146/annurev-matsci-070317-124415.
Повний текст джерелаWang, Yuan, Laipan Zhu, and Cuifeng Du. "Progress in Piezoelectric Nanogenerators Based on PVDF Composite Films." Micromachines 12, no. 11 (October 20, 2021): 1278. http://dx.doi.org/10.3390/mi12111278.
Повний текст джерелаДисертації з теми "Perovskites and fluorites"
Shafi, Shahid. "Solid State Structure-Reactivity Studies on Bixbyites, Fluorites and Perovskites Belonging to the Vanadate, Titanate and Cerate Families." Elsevier, 2012. http://hdl.handle.net/1993/8909.
Повний текст джерелаBalaguer, Ramírez María. "New solid state oxygen and hydrogen conducting materials. Towards their applications as high temperature electrochemical devices and gas separation membranes." Doctoral thesis, Universitat Politècnica de València, 2013. http://hdl.handle.net/10251/31654.
Повний текст джерелаMixed ionic (oxygen ions or protons) and electronic conducting materials (MIEC) separate oxygen or hydrogen from flue gas or reforming streams at high temperature in a process 100% selective to the ion. These solid oxide materials may be used in the production of electricity from fossil fuels (coal or natural gas), taking part of the CO2 separation and storage system. Dense oxygen transport membranes (OTM) can be used in oxyfuel combustion plants or in catalytic membrane reactors (CMR), while hydrogen transport membranes (HTM) would be applied in precombustion plants. Furthermore, these materials may also be used in components for energy systems, as advanced electrodes or electrolytes for solid oxide fuel cells (SOFC) and proton conducting solid oxide fuel cells (PCSOFC) working at high and moderate temperature. The harsh working conditions stablished by the targeted processes include high temperatures and low O2 partial pressures (pO2), probably combined with CO2 and SO2 containing gases. The instability disadvantages presented by the most widely studied materials for these purposes make them impractical for application to gas separation. Thus, the need to discover new stable inorganic materials providing high electronic and ionic conductivity is still present. This thesis presents a systematic search for new mixed ionic-electronic conductors. It includes different crystalline structures and/or composition of the crystal lattice, varying the nature of the elements and the stoichiometry of the crystal. The research has yielded new materials capable to transport oxygen ions or protons and electronic carriers that are stable in the working condition to which they are submitted.
Balaguer Ramírez, M. (2013). New solid state oxygen and hydrogen conducting materials. Towards their applications as high temperature electrochemical devices and gas separation membranes [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/31654
TESIS
Premiado
Stokes, Stephen J. "Atomistic modelling studies of fluorite- and perovskite-based oxide materials." Thesis, University of Bath, 2010. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.527142.
Повний текст джерелаJosepha, Elisha A. "Topochemical Manipulation of Layered Perovskites." ScholarWorks@UNO, 2011. http://scholarworks.uno.edu/td/464.
Повний текст джерелаKeino, Oscar Kipruto. "Investigations of Mixed-Anion Analogs of Manganite Perovskites and Bimetallic Group II Nitride Fluorides." Youngstown State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1515618873224784.
Повний текст джерелаMartin, Andréa Joris Quentin. "Nano-sized Transition Metal Fluorides as Positive Electrode Materials for Alkali-Ion Batteries." Doctoral thesis, Humboldt-Universität zu Berlin, 2020. http://dx.doi.org/10.18452/21619.
Повний текст джерелаMetal fluoride compounds appear as very appealing candidates for the next generation of alkali-ion battery cathodes. However, many drawbacks prevent this family of compounds to be applicable to storage systems. Metal fluorides demonstrate a high insulating character, and the mechanisms involved during the discharge/charge processes atom engender large volume changes and a drastic reorganization of the material, which induces poor reversibility. In order to answer these problematics, the present thesis reports the elaboration of innovative synthesis routes for transition metal fluoride compounds and the application of these fluoride materials in alkali-ion battery systems. In a first part, MFx compounds (M = Co, Fe; x = 2 or 3) are studied. Those compounds exhibit high initial capacity but very poor cyclability and low C-rate capabilities. Ex-situ X-ray diffraction and transmission electron microscopy demonstrate that the low reversibility of the processes is mainly due to the conversion reaction occurring during their discharge/charge. In the second part, the syntheses of transition metal fluoride perovskites are reported, as well as their electrochemical properties. NaFeF3 demonstrates excellent performances and reversibility. The study of the mechanisms occurring during its charge/discharge processes towards different alkali systems by ex-situ and operando X-ray diffraction reveals that its crystalline framework is maintained along the cycles, resulting in high reversibility and excellent C-rate performance. This retention of the crystal framework is possible by an electrochemical stabilization of a cubic conformation of FeF3, which is usually only observable at high temperature (400 °C), and can be explained by lower reorganizations within the crystal framework. Similar electrochemical properties could be observed for KFeF3 and NH4FeF3, where ammonium ions are reported for the first time as a charge carrier in alkali-ion systems.
PORFIRIO, TATIANE C. "Preparação e caracterização microestrutural e dielétrica da perovsquita CaCusub(3)Tisub(4)Osub(12)." reponame:Repositório Institucional do IPEN, 2015. http://repositorio.ipen.br:8080/xmlui/handle/123456789/24066.
Повний текст джерелаMade available in DSpace on 2015-10-28T11:10:50Z (GMT). No. of bitstreams: 0
Tese (Doutorado em Tecnologia Nuclear)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
García, Fayos Julio. "DEVELOPMENT OF CERAMIC MIEC MEMBRANES FOR OXYGEN SEPARATION: APPLICATION IN CATALYTIC INDUSTRIAL PROCESSES." Doctoral thesis, Universitat Politècnica de València, 2017. http://hdl.handle.net/10251/86189.
Повний текст джерелаLa presente tesis trata sobre el desarrollo de membranas cerámicas para la producción de O2, así como de su uso en distintas aplicaciones industriales (producción de energía, industria química). Se han considerado distintos tipos de materiales tales como perovskitas (BSCF y LSCF), fluoritas (CGO) y materiales composites, así como distintas arquitecturas de membrana. y activación catalítica para optimizar la permeación y la selectividad/rendimiento en reacciones químicas. Para el BSCF se estudió la influencia del espesor y el uso de soportes porosos en la permeación de O2, con una mejora para las membranas más finas, y también el papel de los soportes porosos, contribuyendo con una resistencia adicional en el proceso de permeación. El estudio permitió también conocer más en profundidad los procesos que afectan a los distintos tipos de membranas, y establecer un modelo de permeación para membranas. Se recurrió a la activación catalítica mediante la adición de capas porosas de BSCF, obteniendo así mejores resultados para las membranas con capas en ambos lados. El concepto de membranas de BSCF activadas superficialmente se consideró también para la producción de C2H4 a partir de la deshidrogenación oxidativa de etano (ODHE), obteniendo rendimientos de C2H4 muy elevados. Membranas de BSCF con geometría tubular fueron caracterizadas para aplicaciones de producción de O2 y C2H4 mediante acoplamiento oxidativo de metano (OCM). Se consideró al LSCF para su uso en aplicaciones con atmósferas conteniendo CO2. Se desarrollaron membranas soportadas en soportes porosos de LSCF mediante tape casting y freeze-casting, realizando completos estudios de permeación, además de estudiar el tipo de soporte poroso ofreciendo menos resistencia a la difusión de los gases. Pese que para ambos tipos de membranas se obtuvieron muy buenos flujos de oxígeno, incluso bajo condiciones de CO2, para el caso de membranas con soporte fabricado mediante freeze-casting se consiguieron mayores valores de permeación, optimizándolos incluso con la activación catalítica. Los materiales con estructura fluorita poseen alta estabilidad bajo condiciones de reacción (atmósferas reductoras) o cuando son expuestos a CO2 (aplicaciones de producción de energía). Sin embargo, los valores de permeación suelen ser muy bajos. Se consideró una membrana de CGO-Co de 40 micras de espesor activada con nanopartículas de Pd para llevar a cabo un estudio de sus propiedades para la producción de O2, su comportamiento en contacto con CO2 y con atmósferas conteniendo CH4. La buena estabilidad demostrada y la mejora sustancial de los flujos de O2 bajo ambientes reductores, hacen que este tipo de materiales posean propiedades prometedoras para aplicaciones de oxicombustión y reacciones químicas. Se realizó un estudio con materiales composites formados por NFO-CTO. Una evaluación del contenido en CTO y su relación con la permeación de O2, resultó en mayores valores para composiciones con mayor contenido en CTO. Un composite consistente en 50NFO-50CTO se consideró para la realización de tests bajo condiciones de oxicombustión, con presencia de SO2. Pese al notable descenso en los flujos de O2, el material resultó ser completamente estable tras una exposición continuada al SO2. Un amplio estudio del efecto del CO2 y del SO2 sobre las reacciones superficiales se realizó mediantes medidas de EIS en electrodos de 60NFO-40CTO, demostrando que el SO2 afecta significativamente a las reacciones superficiales mediante procesos de adsorción competitiva en los centros activos. Se minimizó el efecto del SO2 sobre las reacciones de intercambio superficial al activar las membranas con capas catalíticas porosas de 60NFO-40CTO con distintos catalizadores, confirmando posteriormente esta mejora en tests de permeación en las mismas condiciones. Así mismo, se optimizó notablemente la permeación de las membranas de 60NFO-40CTO reduciendo el espes
La present tesi tracta sobre el desenvolupament de membranes ceràmiques per a la producció d'O2, així com del seu ús en diverses aplicacions industrials (producció d'energia, indústria química). S'han considerat diversos materials tals com perovskites (BSCF i LSCF), fluorites (CGO) i materials composites, així com diferents arquitectures de membrana i l'activació catalítica per a millorar la permeació i la sel·lectivitat/rendiment de les reaccions químiques. Per al BSCF s'estudià la influència de l'espessor i l'ús de suports porosos en la permeació d'O2, amb una millora dels fluxos d'O2 per al cas de les membranes més fines, i també el paper dels suports porosos, els quals contribueixen afegint una resistència al procés de permeació. L'estudi també va permetre conèixer més en profunditat els processos que afecten als diferents tipus de membranes, i establir un model de permeació per a membranes. Es va recórrer a l'activació catalítica mitjançant l'adició de capes poroses de BSCF, obtenint així millors resultats per a les membranes activades a ambdós costats. El concepte de membranes de BSCF activades superficialment es va considerar també per a la producció d'etilè a mitjançant la deshidrogenació oxidativa d'età (ODHE), obtenint rendiments de C2H4 molt elevats. Membranes de BSCF amb geometria tubular van ser caracteritzades per a aplicacions de producció d'O2 i C2H4 mitjançant l'acoplament oxidatiu de metà (OCM). Es va considerar al LSCF per al seu ús en aplicacions amb atmosferes contenint CO2. Així doncs, es van desenvolupar membranes suportades sobre suports porosos de LSCF fabricats per tape càsting i freeze càsting. Es van realitzar estudis complets de permeació per a ambdós casos, a més d'estudiar el tipus de suport porós que ofereix una menor resistència a la difusió dels gasos. Malgrat que es van obtindré molts bons fluxos d'O2 per als dos tipus de membranes, inclús sota condicions amb CO2, per al cas de les membranes amb suport fabricat per freeze càsting es van aconseguir majors valors de permeació, sent inclús optimitzats amb l'activació catalítica. Els materials amb estructura fluorita destaquen per l'alta estabilitat sota condicions de reacció (atmosferes reductores) o quan són exposats a CO2 (aplicacions per a la producció d'energia). Malgrat això, els valors de permeació solen ser molt baixos. Es va considerar una membrana de CGO-Co de 40 micras d'espessor activada amb partícules de Pd per a realitzar un estudi sobre les seues propietats en quant a la producció d'O2, el seu comportament amb el contacte amb CO2 i atmosferes reductores contenint CH4. La bona estabilitat demostrada i una millora substancial dels fluxos d'O2 sota ambients reductors fan que aquest tipus de material presente propietats prometedores per a aplicacions d'oxicombustió i reaccions químiques. Es va realitzar un estudi sobre materials composites formats per NFO-CTO. Es va realitzar una avaluació del contingut en CTO i la relació amb la permeació, observant una millora de la permeació amb un major contingut de CTO. Un composite consistent en 50NFO-40CTO es va considerar per a la realització de tests de permeació en condicions d'oxicombustió amb presència de SO2. Malgrat el notable descens en els fluxos d'O2, el material resultà ser estable després d'una exposició continuada al SO2. Es mesurà l'efecte del CO2 i del SO2 sobre les reaccions superficials fent ús de la tècnica d'EIS en elèctrodes de 60NFO-40CTO. Demostrant que el SO2 afecta significativament a les reaccions superficials degut a una adsorció competitiva O2-SO2 als centres actius. Es minimitzà l'efecte del SO2 sobre les reaccions superficials al activar les membranes amb capes poroses de 60NFO-40CTO amb diferents catalitzadors. Aquestes capes van ser caracteritzades per EIS sota condicions de SO2, confirmant posteriorment la millora al realitzar tests de permeació. S'optimitzà notablement la perme
García Fayos, J. (2017). DEVELOPMENT OF CERAMIC MIEC MEMBRANES FOR OXYGEN SEPARATION: APPLICATION IN CATALYTIC INDUSTRIAL PROCESSES [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86189
TESIS
Premiado
DIOT, NADEGE. "Nouveaux oxynitrures de type perovskite ou fluorine dans les systemes m-ta(nb)-o-n (m : alcalinoterreux) et ln-w-o-n (ln : element de terre rare) en vue d'une application comme pigments colores." Rennes 1, 1999. http://www.theses.fr/1999REN10107.
Повний текст джерелаLee, Meng-Ting, and 李孟庭. "Recovery of Fluoride as Perovskite-like Minerals from Industrial Wastewater." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/23297925120945137021.
Повний текст джерела國立臺灣科技大學
化學工程系
102
This study aims to investigate the recovery of fluoride (626.5 mg/L) from an industrial wastewater in forms of perovskite-like minerals. Effects of equilibrium pH (pHeq), molar ratio of Na to F (Na/F), molar ratio of Al to F (Al/F), and different pH reagents were examined. Fluoride was recovered as cryolite (Na3AlF6) and elpasolite (K2NaAlF6) when pH of wastewater adjusted by NaOH and KOH, respectively. Once NaOH was used as pH reagent, fluoride removal efficiency was higher than 94.5% at Na/F of 12/6, Al/F of 1/6 and pHeq range of 5.5 to 7.2, but it decreased to 78.0% as pHeq became higher than 7.6. Although characteristic peaks of NaAlF4‧0.83H2O and AlF2OH‧1.4H2O showed in crystal patterns, it is noted that the amount of byproducts was insignificant from wet chemical analysis. Therefore, Na3AlF6 was the main precipitate recovered from wastewater at pHeq range of 3.4 to 7.2. However, increasing Al/F from 1/6 to 2.5/6, did not enhance removal efficiency at pHeq 5.5. PHREEQC simulation is conducted to predict and compare precipitation and speciation of Na3AlF6 with experimental ones. On the other hand, similar fluoride removal efficiency (>94.7%) was obtained using KOH as pH reagent at Na/F of 3/6 and Al/F of 1/6 when pHeq ranged from 4.2 to 5.7. As Na/F reduced to 1/6, it was obtained the lower fluoride removal efficiency except for pHeq 5.5. Morphology of precipitates recovered from wastewater was significantly affected by Na/F, Al/F and pHeq. Size analysis and sedimentation test showed that both K2NaAlF6 and Na3AlF6 could be easily separated from water.
Книги з теми "Perovskites and fluorites"
Goumri-Said, Souraya. Investigation of electronic, magnetic and elastic properties using first principles calculations and new empirical approach: Application to III-V, II-VI semiconductors and perovskite-like fluorides materials, 2006. Kerala, India: Transworld Research Network, 2006.
Знайти повний текст джерелаЧастини книг з теми "Perovskites and fluorites"
Sōmiya, Shigeyuki, Shin-Ichi Hirano, Masahiro Yoshimura, and Kazumichi Yanagisawa. "Hydrothermal crystal growth of perovskite-type fluorides." In Hydrothermal Reactions for Materials Science and Engineering, 168–71. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-0743-0_26.
Повний текст джерелаFigueiredo, M. O., and A. Correia Dos Santos. "Perovskite and Fluorite-Related Ternary Phases in the System CaO-ZrO2-TiO2." In Zirconia’88, 81–87. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1139-0_7.
Повний текст джерелаZhou, Wuzong, David A. Jefferson, and John M. Thomas. "Intermediate compositions in the series BI2O3-M2O5structures incorporating elements of pervoskite and fluorite." In Perovskite: A Structure of Great Interest to Geophysics and Materials Science, 113–17. Washington, D. C.: American Geophysical Union, 2013. http://dx.doi.org/10.1029/gm045p0113.
Повний текст джерелаOnishi, Taku. "Quantum Chemistry in Perovskite Fluoride and Hydride: Nanoscale Hydride Ion Conduction." In Theoretical Chemistry for Advanced Nanomaterials, 27–51. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0006-0_2.
Повний текст джерелаHelgason, Örn. "Mössbauer spectroscopy of perovskite-related oxide fluorides of composition Ba0.5Sr0.5FeO2F at elevated temperatures." In ICAME 2007, 557–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-78697-9_74.
Повний текст джерелаGupta, Sapna, and Prabhakar Singh. "Structural And Electroc Hemical Performance Stability Of Perovskite-Fluorite Composi Te For High Temperature Electrochemical Devices." In Advances in Solid Oxide Fuel Cells and Electronic Ceramics, 67–74. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119211501.ch7.
Повний текст джерелаClark, L., and P. Lightfoot. "Magnetic Properties of Transition Metal Fluoride Perovskites." In Photonic and Electronic Properties of Fluoride Materials, 261–84. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-12-801639-8.00013-1.
Повний текст джерелаV. Kalinina, Marina, Daria A. Dyuskina, Irina G. Polyakova, Sergey V. Mjakin, Maxim Yu. Arsent’ev, and Olga A. Shilova. "Synthesis and Investigation of Ceramic Materials for Medium-Temperature Solid Oxide Fuel Cells." In Smart and Advanced Ceramics and Applications [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.105108.
Повний текст джерелаТези доповідей конференцій з теми "Perovskites and fluorites"
Belsare, P. D., C. P. Joshi, S. V. Moharil, and S. K. Omanwar. "On the Eu2+ luminescence in some perovskite fluorides." In ADVANCED MATERIALS AND RADIATION PHYSICS (AMRP-2015): 4th National Conference on Advanced Materials and Radiation Physics. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4929173.
Повний текст джерелаXu, Zhigang, Gregory Young, Gukan Rajaram, and Jag Sankar. "Proton Conductive Strontium Cerate Thin Films Processed Using Flame-Assisted Chemical Vapor Deposition." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15022.
Повний текст джерелаKnyazev, O. A., A. G. Ptashkin, S. V. Stefanovsky, M. A. Zen’kovskaya, S. V. Yudintsev, B. S. Nikonov, and O. I. Stefanovsky. "Inductive Cold Crucible Melting and Characterization of Uranium and Thorium Bearing Murataite Ceramics." In The 11th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2007. http://dx.doi.org/10.1115/icem2007-7126.
Повний текст джерелаЗвіти організацій з теми "Perovskites and fluorites"
Browning, N. D. [Perovskite and Fluorite Grain Boundary Properties]. Final Project Report. Office of Scientific and Technical Information (OSTI), February 2004. http://dx.doi.org/10.2172/825192.
Повний текст джерела