Готові списки джерел за темами / Perovskite thin films

Добірка наукової літератури з теми "Perovskite thin films"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Perovskite thin films".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Perovskite thin films"

1

Guneri, Emine, and Nilgun Kalaycıoglu Ozpozan. "The Structural and Optical Properties of Perovskite Thin Films." European Journal of Formal Sciences and Engineering 6, no. 1 (April 1, 2023): 13–21. http://dx.doi.org/10.2478/ejfe-2023-0002.

Повний текст джерела
Анотація:
Abstract Perovskite materials have many interesting properties such as modulation of the optical band gap and the properties of quantum wells. In addition, they have a stable structure. For these reasons, perovskites have attractive properties for optoelectronic devices. Additionally, the structural and optical properties can be changed by means of different halide atoms doped into materials. In this study, the effect of iodine on the structural, and optical properties of perovskite thin films was investigated. KCaCl2 I and KCaCl3 perovskite were prepared by chemical bath deposition on a glass substrate. The crystal structures of the films were determined by X-ray diffraction. X-Ray Diffraction (XRD) analysis revealed that the films had a crystalline structure. In addition, KCaCl2 I perovskite thin film has better crystalline than KCaCl3 perovskite thin films. Linear optical parameters were determined using transmittance and absorbance measurements. And then, the optical band gap values, extinction coefficient, refractive index, and dielectric constants were determined as linear optical properties. It was understood that these properties were affected by iodine.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fan, Ping, Huan-Xin Peng, Zhuang-Hao Zheng, Zi-Hang Chen, Shi-Jie Tan, Xing-Ye Chen, Yan-Di Luo, Zheng-Hua Su, Jing-Ting Luo, and Guang-Xing Liang. "Single-Source Vapor-Deposited Cs2AgBiBr6 Thin Films for Lead-Free Perovskite Solar Cells." Nanomaterials 9, no. 12 (December 11, 2019): 1760. http://dx.doi.org/10.3390/nano9121760.

Повний текст джерела
Анотація:
Lead-free double perovskites have been considered as a potential environmentally friendly photovoltaic material for substituting the hybrid lead halide perovskites due to their high stability and nontoxicity. Here, lead-free double perovskite Cs2AgBiBr6 films are initially fabricated by single-source evaporation deposition under high vacuum condition. X-ray diffraction and scanning electron microscopy characterization show that the high crystallinity, flat, and pinhole-free double perovskite Cs2AgBiBr6 films were obtained after post-annealing at 300 °C for 15 min. By changing the annealing temperature, annealing time, and film thickness, perovskite Cs2AgBiBr6 solar cells with planar heterojunction structure of FTO/TiO2/Cs2AgBiBr6/Spiro-OMeTAD/Ag achieve an encouraging power conversion efficiency of 0.70%. Our preliminary work opens a feasible approach for preparing high-quality double perovskite Cs2AgBiBr6 films wielding considerable potential for photovoltaic application.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Caporali, Stefano, Stefano Mauro Martinuzzi, Lapo Gabellini, and Nicola Calisi. "Magnetron Sputtering Deposition of High Quality Cs3Bi2I9 Perovskite Thin Films." Materials 16, no. 15 (July 27, 2023): 5276. http://dx.doi.org/10.3390/ma16155276.

Повний текст джерела
Анотація:
Nontoxic all-inorganic perovskites are among the most promising materials for the realization of optoelectronic devices. Here, we present an innovative way to deposit lead-free, totally inorganic Cs3Bi2I9 perovskite from vapor phase. Taking use of a magnetron sputtering system equipped with a radiofrequency working mode power supply and a single target containing the correct ratio of CsI and BiI3 salts, it was possible to deposit a Cs3Bi2I9 perovskitic film on silicon and soda-lime glass. The target composition was optimized to obtain a stoichiometric deposition, and the best compromise was found with a mix enriched with 20% w/w of CsI. Secondly, the effect of post-deposition thermal treatments (150 °C and 300 °C) and of the deposition on a preheat substrate (150 °C) were evaluated by analyzing the chemical composition, the morphology, the crystal structure, and the optical properties. The thermal treatment at 150 °C improved the uniformity of the perovskite film; the one at 300 °C damaged the perovskite deposited. Depositing on a preheated substrate at 150 °C, the obtained film showed a higher crystallinity. An additional thermal treatment at 150 °C on the film deposed on the preheated substrate showed that the crystallinity remains high, and the morphology becomes more uniform.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Szuromi, P. "Healing perovskite thin films." Science 349, no. 6248 (August 6, 2015): 599–600. http://dx.doi.org/10.1126/science.349.6248.599-d.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Chen, Lung-Chien, Ching-Ho Tien, Yang-Cheng Jhou, and Wei-Cheng Lin. "Co-Solvent Controllable Engineering of MA0.5FA0.5Pb0.8Sn0.2I3 Lead–Tin Mixed Perovskites for Inverted Perovskite Solar Cells with Improved Stability." Energies 13, no. 10 (May 13, 2020): 2438. http://dx.doi.org/10.3390/en13102438.

Повний текст джерела
Анотація:
Use of a lead–tin mixed perovskite is generally considered an effective method to broaden the absorption wavelength of perovskite thin films. However, the preparation of lead–tin mixed perovskites is a major challenge due to the multivalent state of tin and stability in the atmosphere. This study attempted to replace the organic cation and metal elements of perovskites with a relatively thermal stable formamidinium (FA+) and a more environmentally friendly tin element. MA0.5FA0.5Pb0.8Sn0.2I3 lead–tin mixed perovskite thin films were prepared with the one-step spin-coating method. By adjusting the dimethylformamide (DMF):dimethyl sulfoxide (DMSO) concentration ratio of the lead–tin mixed perovskite precursor solution, the surface morphologies, crystallinity, and light-absorbing properties of the films were changed during synthesis to optimize the lead–tin mixed perovskite films as a light-absorbing layer of the inverted perovskite solar cells. The quality of the prepared lead–tin mixed perovskite film was the highest when the ratio of DMF:DMSO = 1:4. The power-conversion efficiency of the perovskite solar cell prepared with the film was 8.05%.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sajid, Sajid, Salem Alzahmi, Imen Ben Salem, and Ihab M. Obaidat. "Perovskite-Surface-Confined Grain Growth for High-Performance Perovskite Solar Cells." Nanomaterials 12, no. 19 (September 26, 2022): 3352. http://dx.doi.org/10.3390/nano12193352.

Повний текст джерела
Анотація:
The conventional post-annealing (CPA) process is frequently employed and regarded a crucial step for high-quality perovskite thin-films. However, most researchers end up with unwanted characteristics because controlling the evaporation rate of perovskite precursor solvents during heat treatment is difficult. Most perovskite thin-films result in rough surfaces with pinholes and small grains with multiple boundaries, if the evaporation of precursor solvents is not controlled in a timely manner, which negatively affects the performance of perovskite solar cells (PSCs). Here, we present a surface-confined post-annealing (SCPA) approach for controlling the evaporation of perovskite precursor solvents and promoting crystallinity, homogeneity, and surface morphology of the resulting perovskites. The SCPA method not only modulates the evaporation of residual solvents, resulting in pinhole-free thin-films with large grains and fewer grain boundaries, but it also reduces recombination sites and facilitates the transport of charges in the resulting perovskite thin-films. When the method is changed from CPA to SCPA, the power conversion efficiency of PSC improves from 18.94% to 21.59%. Furthermore, as compared to their CPA-based counterparts, SCPA-based PSCs have less hysteresis and increased long-term stability. The SCPA is a potentially universal method for improving the performance and stability of PSCs by modulating the quality of perovskite thin-films.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dang, Zhiya, and Duc Anh Dinh. "Interaction of light with lead halide perovskites: A review." Characterization and Application of Nanomaterials 2, no. 2 (November 19, 2019): 67. http://dx.doi.org/10.24294/can.v2i2.813.

Повний текст джерела
Анотація:
Lead halide perovskites are the new rising generation of semiconductor materials due to their unique optical and electrical properties. The investigation of the interaction of halide perovskites and light is a key issue not only for understanding their photophysics but also for practical applications. Hence, tremendous efforts have been devoted to this topic and brunch into two: (i) decomposition of the halide perovskites thin films under light illumination; and (ii) influence of light soaking on their photoluminescence (PL) properties. In this review, we for the first time thoroughly compare the illumination conditions and the sample environment to correlate the PL changes and decomposition of perovskite under light illumination. In the case of vacuum and dry nitrogen, PL of the halide perovskite (MAPbI3–xClx, MAPbBr3–xClx, MAPbI3) thin films decreases due to the defects induced by light illumination, and under high excitations, the thin film even decomposes. In the presence of oxygen or moisture, light induces the PL enhancement of halide perovskite (MAPbI3) thin films at low light illumination, while increasing the excitation, which causes the PL to quench and perovskite thin film to decompose. In the case of mixed halide perovskite ((MA)Pb(BrxI1-x)3) light induces reversible segregation of Br domains and I domains.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Magubane, Siphesihle Siphamandla, Christopher Joseph Arendse, Siphelo Ngqoloda, Franscious Cummings, Christopher Mtshali, and Amogelang Sylvester Bolokang. "Chemical Vapor Deposited Mixed Metal Halide Perovskite Thin Films." Materials 14, no. 13 (June 24, 2021): 3526. http://dx.doi.org/10.3390/ma14133526.

Повний текст джерела
Анотація:
In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb1−xSnxI3, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl2 source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 Å3 for MAPbI3 to about 983.3 Å3 for MAPb0.39Sn0.61I3, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (Eg) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3–1 µm) and surface coverage of the perovskite films compared with the precursor films.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Onodera, Akira, Masanori Fukunaga, and Masaki Takesada. "Ferroelectric Instability and Dimensionality in Bi-Layered Perovskites and Thin Films." Advances in Condensed Matter Physics 2012 (2012): 1–10. http://dx.doi.org/10.1155/2012/714625.

Повний текст джерела
Анотація:
The dielectric and thermal properties of Bi (bismuth)-layered perovskite SrBi2Ta2O9(SBT) are discussed in comparison with ferroelectric thin BaTiO3films. Although these two perovskites exhibit quite a different nature, the dielectric properties of BaTiO3thin film are similar to those in bulk SBT. The dielectric properties and pseudo-two-dimensional structure between SBT and thin film suggest that the bulk layered ferroelectric SBT is a good model of ultra-thin ferroelectric film with two perovskite layers, free from any misfit lattice strain with substrate and surface charge at the interface with electrodes. Based on the mechanism of ferroelectric phase transition of SBT, it seems plausible that the ferroelectric interaction is still prominent but shows a crossover from ferroelectric to antiferroelectric interaction in perovskite ultra-thin films along the tetragonal axis.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kwok, Chi Kong, and Seshu B. Desu. "Formation kinetics of PbZrxTi1−xO3 thin films." Journal of Materials Research 9, no. 7 (July 1994): 1728–33. http://dx.doi.org/10.1557/jmr.1994.1728.

Повний текст джерела
Анотація:
The pyrochlore to perovskite transition in sputtered PZT thin films has been studied using SEM and XRD. The films were annealed in the temperature range between 350 °C and 750 °C, and the transition temperature for pyrochlore to perovskite transition was found to be around 525 °C. Isothermal annealing was used to study the nucleation and growth kinetics of the perovskite phase. The results showed a linear growth rate for the perovskite phase, thereby indicating an interface controlled process. Also, the growth was found to be isotropic in two dimensions parallel to the plane of the substrate. The nucleation of the perovskite phase was found to be random. The effective activation energy of the perovskite transition was found to be 494 kJ/mol using Avrami's approach.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Perovskite thin films"

1

Zednik, Ricardo Johann. "Stress effects in ferroelectric perovskite thin-films /." May be available electronically:, 2008. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bernabe, Gustau Catalan. "An investigation of functional properties in perovskite thin films." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343097.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sakamoto, Wataru, Asaki Iwata, and Toshinobu Yogo. "Ferroelectric properties of chemically synthesized perovskite BiFeO_3–PbTiO_3 thin films." American Institite of Physics, 2008. http://hdl.handle.net/2237/11988.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Mabiala, Floyd Lionel. "Photo-physical properties of lead-tin binary Perovskite thin films." University of Western Cape, 2021. http://hdl.handle.net/11394/8002.

Повний текст джерела
Анотація:
>Magister Scientiae - MSc
Organic-inorganic lead-based perovskite has exhibited great performance in the past few years. However, the lead (Pb) embedded in those compounds is a significant drawback to further progress, due to its environmental toxicity. As an alternative, tin (Sn) based-perovskites have demonstrated promising results in terms of electrical and optical properties for photovoltaic devices, but the oxidation of tin ion- from stannous ion (Sn2+) to stannic ion (Sn4+) presents a problem in terms of performance and stability when exposed to ambient conditions. A more feasible approach may be in a Pb-Sn binary metal perovskite in pursuit of efficient, stable perovskite solar cells (PSCs) with reduced Pb-content, as compared to pure Pb- or Sn-based PSCs. Here, we report on the deposition of a Pb-Sn binary perovskite by sequential chemical vapor deposition.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Johnsson, Peter. "Processing and Properties of Ultrathin Perovskite Manganites." Doctoral thesis, KTH, Microelectronics and Information Technology, IMIT, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3511.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Li, To-kit, and 李道傑. "Preparation and properties of epitaxial thin films of oxide materials with a perovskite structure." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31228318.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

James, Amy Frances. "Tin-oxide thin films by thermal oxidation." University of Western Cape, 2021. http://hdl.handle.net/11394/8239.

Повний текст джерела
Анотація:
>Magister Scientiae - MSc
Tin dioxide (SnO2) thin films are a worthy candidate for an electron transport layer (ETL) in perovskite solar cells, due to its suitable energy level, high electron mobility of 240 cm2 v-1 s- 1, desirable band gap of 3.6 - 4.0 eV, and ultimately proves to be suited for a low temperature thermal oxidation technique for ETL production. A variety of methods are available to prepare SnO2 thin films such as spin and dip coating and chemical bath deposition. However, the customary solid-state method, which incorporates thermal decomposition and oxidation of a metallic Sn precursor compound in an oxygen abundant atmosphere prevails to be low in cost, is repeatable and allows for large-scale processing.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Yao, Hui. "Study of the giant electroresistance in epitaxial thin films of La0.9Sr0.1MnO3." Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B3640911X.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Yao, Hui, and 姚暉. "Study of the giant electroresistance in epitaxial thin films of La0.9Sr0.1MnO3." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2005. http://hub.hku.hk/bib/B3640911X.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Wu, Zhenping, and 吴真平. "Studies on thin films and heterojunctions of electron/hole-doped perovskite manganites." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B49799307.

Повний текст джерела
Анотація:
Intensive research interests in condensed matter physics have been focused at the strongly correlated electron systems. Most of the efforts were devoted in hole-doped manganites with a double exchange interaction between Mn3+/Mn4+. Recently, tetravalent ions substitution has also stimuli much attention as a supplement for the hole-doping. Such electron-doped manganites may be of great potential for the development of all-manganites devices. Manganites are extremely sensitive to external disturbances, such as magnetic fields, electric fields, currents, mechanical strain, and photo illumination, etc. These extraordinary properties make manganites promising for practical applications. In this thesis, the field modulation on physical properties in electron/hole-doped manganites films and heterojunctions were investigated. The effects of tetravalent hafnium doping on the structural, transport, and magnetic properties of polycrystalline La1-xHfxMnO3(LHMO) (0.05 ≤x ≤0.3) were studied systematically. A phase diagram was obtained for the first time through magnetization and resistance measurements in a broad temperature range. An abnormal enhancement of magnetization was observed at about 42 K. It was further confirmed that the second magnetic phase MnO2in LHMO gives rise to such a phenomenon. The dynamic magnetic properties of LHMO, such as relaxation and aging processes, were studied, demonstrating a spin-glass state at low temperature accompanied by a ferromagnetic phase. Heterojunctions composed of n-type SrTiO3-δand p-type GaAs exhibited excellent rectifying behavior from 40K to room temperature. The photocarrier injection effect and a colossal photo-resistance were observed. Strong dependences on both temperature and bias voltage were found as well, which might be under stood by considering the band structure of the formed p-njunction. By employing an ultrathin SrTiO3buffer layer,La0.8Ca0.2MnO3films could be epitaxially grown on GaAs substrates. The heterostructures exhibit good rectifying behavior with a paramagnetic-ferromagnetic transition at ~200K. The variation of diffusion voltage with temperature in these heterostructures could be explained by the effects of the Hund’s rule coupling between the La0.8Ca0.2MnO3and the buffer layer. The effects of the strain induced by ferroelectric poling on the magnetic and electric properties have been investigated by using 0.67Pb(Mg1/3Nb2/3)O3-0.33PbTiO3(PMN-PT) substrates. The polarization of the PMN-PT crystal reduces the biaxial tensile strain in the formed La0.9Hf0.1MnO3layer.It results in a significant decrease in resistance and an enhancement of the phase transition temperature as well as the magnetization. The impact of the lattice strain on the charge/orbital ordering state was also been studied. The modification of charge/orbital ordering phase by the electric fields and ferroelectric polarization suggested that the unstable states in the manganites are sensitive to the strain. Heterojunctions of La1-xHfxMnO3/Nb:SrTiO3 were fabricated and investigated under different fields (electric, magnetic and optic). These heterojunctions exhibited excellent rectifying behavior in a wide temperature range. Their properties could be significantly modulated by magnetic fields. Prominent photovoltaic effect was also observed in the formed junctions.
published_or_final_version
Physics
Doctoral
Doctor of Philosophy
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Perovskite thin films"

1

Kinigstein, Eli Diego. Structural and Optical Characterization of Solution Processed Lead Iodide Ruddlesden-Popper Perovskite Thin Films. [New York, N.Y.?]: [publisher not identified], 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Gorji, Nima E., and Agnieszka Iwan. Nanomaterials for Chalcopyrite, Kesterite, and Perovskite Thin Film Solar Cells. Elsevier, 2019.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Toxic Gas Sensors and Biosensors. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901175.

Повний текст джерела
Анотація:
The book focuses on novel sensor materials and their environmental and healthcare applications, such as NO2 detection, toxic gas and biosensing, hydrazine determination, glucose sensing and the detection of toxins and pollutants on surfaces. Materials covered include catalytic nanomaterials, metal oxides, perovskites, zeolites, spinels, graphene-based gas sensors, CNT/Ni nanocomposites, glucose biosensors, single and multi-layered stacked MXenes, black phosphorus, transition metal dichalcogenides and P3OT thin films.
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Perovskite thin films"

1

Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Perovskites Thin Films for Photovoltaic Applications." In Perovskite Solar Cells, 3–38. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Scott, James F. "Layered Perovskite Thin Films and Memory Devices." In Thin Film Ferroelectric Materials and Devices, 115–44. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6185-9_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Padhan, Prahallad, and Arunava Gupta. "Magnetic/Multifunctional Double Perovskite Oxide Thin Films." In Functional Metal Oxides, 51–87. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2013. http://dx.doi.org/10.1002/9783527654864.ch2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Lokhande, V. C., C. H. Kim, A. C. Lokhande, Chandrakant D. Lokhande, and T. Ji. "Metal Oxides for Perovskite Solar Cells." In Chemically Deposited Nanocrystalline Metal Oxide Thin Films, 197–233. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68462-4_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Mosconi, Edoardo, Thibaud Etienne, and Filippo De Angelis. "First-Principles Modeling of Organohalide Thin Films and Interfaces." In Organic-Inorganic Halide Perovskite Photovoltaics, 19–52. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-35114-8_2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Roelofs, A., K. Szot, and R. Waser. "Domain Switching and Self- Polarization in Perovskite Thin Films." In Nanoscale Phenomena in Ferroelectric Thin Films, 135–55. Boston, MA: Springer US, 2004. http://dx.doi.org/10.1007/978-1-4419-9044-0_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Panagiotopoulos, I., M. Pissas, C. Christides, G. Kallias, V. Psycharis, N. Moutis, and D. Niarchos. "Colossal Magnetoresistance in Manganese Perovskite Films and Multilayers." In Nano-Crystalline and Thin Film Magnetic Oxides, 119–32. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4493-3_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Fernandez-Izquierdo, Leunam, Martin G. Reyes-Banda, Jesus A. Caraveo-Frescas, and Manuel Quevedo-Lopez. "Inorganic Halide Perovskite Thin Films for Neutron Detection." In Advanced Materials for Radiation Detection, 81–95. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-76461-6_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Saxena, Vibha. "Role of Ultrathin Electron Transport Layers in Performance of Dye-Sensitized and Perovskite Solar Cells." In Recent Advances in Thin Films, 479–505. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6116-0_16.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Belt, Roger F., and Robert Uhrin. "Perovskite Related Substrates for Superconductor Films — Rare Earth Orthogallates." In Science and Technology of Thin Film Superconductors, 353–62. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-5658-5_42.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Perovskite thin films"

1

Manley, Phillip, Klaus Jäger, Philipp Tockhorn, Sven Burger, Steve Albrecht, and Christiane Becker. "Optimization of nanostructured high efficiency perovskite/c-Si tandem solar cells via numerical simulation (Conference Presentation)." In Nanostructured Thin Films XI, edited by Tom G. Mackay and Akhlesh Lakhtakia. SPIE, 2018. http://dx.doi.org/10.1117/12.2321240.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Dubey, Ashish, Khan M. Reza, Eman Gaml, Nirmal Adhikari, and Qiquan Qiao. "Crystallization of perovskite film using ambient moisture and water as co-solvent for efficient planar perovskite solar cell (Conference Presentation)." In Thin Films for Solar and Energy Technology VIII, edited by Michael J. Heben and Mowafak M. Al-Jassim. SPIE, 2016. http://dx.doi.org/10.1117/12.2238334.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Röhm, Holger, Tobias Leonhard, Alexander D. Schulz, Susanne Wagner, Michael J. Hoffmann, and Alexander Colsmann. "Ferroelectric poling of methylammonium lead iodide thin films." In Organic, Hybrid, and Perovskite Photovoltaics XXI, edited by Kwanghee Lee, Zakya H. Kafafi, Paul A. Lane, Harald W. Ade, and Yueh-Lin (Lynn) Loo. SPIE, 2020. http://dx.doi.org/10.1117/12.2568891.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Wasa, K., T. Matsushima, H. Adachi, T. Matsunaga, T. Yanagitani, and T. Yamamoto. "High Tc/high coupling perovskite thin films." In 2014 Joint IEEE International Symposium on the Applications of Ferroelectrics, International Workshop on Acoustic Transduction Materials and Devices & Workshop on Piezoresponse Force Microscopy (ISAF/IWATMD/PFM). IEEE, 2014. http://dx.doi.org/10.1109/isaf.2014.6923017.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Wasa, K., T. Matsushima, H. Adachi, T. Matsunaga, T. Yanagitani, and T. Yamamoto. "High Tc/high coupling perovskite thin films." In 2014 15th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2014. http://dx.doi.org/10.1109/icept.2014.6918768.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sessolo, Michele. "Vacuum deposition of perovskite films and solar cells." In 2nd nanoGe International Conference on Perovskite Thin Film Photovoltaics and Perovskite Photonics and Optoelectronics. València: Fundació Scito, 2019. http://dx.doi.org/10.29363/nanoge.nipho.2020.088.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ramírez Quiroz, César Omar, Carina Bronnbauer, Ievgen Levchuk, Michael Salvador, Yi Hou, Karen K. Forberich, and Christoph J. Brabec. "Coloring semitransparent room-temperature fabricated perovskite solar cells via dielectric mirrors (Conference Presentation)." In Thin Films for Solar and Energy Technology VIII, edited by Michael J. Heben and Mowafak M. Al-Jassim. SPIE, 2016. http://dx.doi.org/10.1117/12.2238626.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Abargues, Rafael, Iván Sánchez-Alarcón, Jaume Noguera, Vladimir Chirvony, Juan F. Sánchez- Royo, Pedro J. Rodríguez-Canto, M. Aguilar-Frutis, G. Alarcón-Flores, and Juan P. Martínez- Pastor. "Spray-driven Solid-State Halide Exchange in CsPbX3 Nanocrystal Films." In 2nd nanoGe International Conference on Perovskite Thin Film Photovoltaics and Perovskite Photonics and Optoelectronics. València: Fundació Scito, 2019. http://dx.doi.org/10.29363/nanoge.nipho.2020.049.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Park, Cheolmin. "Thin nanostructured perovskite films for high performance photo-electronic applications (Conference Presentation)." In Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XVI, edited by André-Jean Attias and Balaji Panchapakesan. SPIE, 2019. http://dx.doi.org/10.1117/12.2531353.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Leontiadou, Marina A., Connor L. Gregory, and Heather M. Yates. "Understanding the optoelectronic properties of chorine-doped perovskite thin films." In Organic, Hybrid, and Perovskite Photovoltaics XXI, edited by Kwanghee Lee, Zakya H. Kafafi, Paul A. Lane, Harald W. Ade, and Yueh-Lin (Lynn) Loo. SPIE, 2020. http://dx.doi.org/10.1117/12.2568837.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Perovskite thin films"

1

Sarney, Wendy L., Kimberley A. Olver, John W. Little, Frank E. Livingston, Krisztian Niesz, and Daniel E. Morse. Materials Research of Perovskite Thin Films for Uncooled Infrared (IR) Detectors. Fort Belvoir, VA: Defense Technical Information Center, July 2011. http://dx.doi.org/10.21236/ada548946.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Gorte, Raymond. Support Effect Studied on Thin-Film Perovskites. Office of Scientific and Technical Information (OSTI), January 2023. http://dx.doi.org/10.2172/1908186.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Perovskite thin films" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії