Дисертації з теми "PCM switches"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-20 дисертацій для дослідження на тему "PCM switches".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Buckley, Dave. "Optimising Networked Data Acquisition for Smaller Configurations." International Foundation for Telemetering, 2013. http://hdl.handle.net/10150/579528.
Повний текст джерелаNetwork switches are a critical component in any networked FTI data acquisition system in order to allow the forwarding of data from the DAU to the target destination devices such as the network recorder, PCM gateways, or ground station. Larger configurations require one or more switch boxes to handle aggregation, routing, filtering and synchronization via the IEEE 1588 Precision Time Protocol. However, for smaller configurations where space and weight restrictions are more stringent, a separate switch box may not be practical This paper discusses how all the essential features of an FTI network, such as flexible forwarding and filtering and IEEE 1588 synchronization, can be maintained without the need for the separate switch box thus making significant savings on weight and size and reducing cost.
Laouini, Mariem. "Conception, simulation et mesures de différents circuits reconfigurables utilisant des commutateurs MEMS RF et des commutateurs à matériaux à changement de phase (PCM)." Electronic Thesis or Diss., Limoges, 2023. https://aurore.unilim.fr/theses/nxfile/default/15037a69-5484-4258-a2c0-9a2beb9183c1/blobholder:0/2023LIMO0020.pdf.
Повний текст джерелаThis manuscript represents the thesis work that mainly deals with the design of RF MEMS switches for reconfigurable circuits. A solution that solves the problem of trapping phenomenon in the dielectric of the switch has been proposed using Ta/Ta2O5 dielectric. This RF MEMS switch, operating at a frequency of 20 GHz, has showed reliable operation without the occurrence of the dielectric-trapping phenomenon. It also gave a high capacitance value of 350 fF and a high capacitive contrast of seven. These components are then integrated into the design of a reflective type phase shifter using the Lange hybrid coupler. The phase shifter guaranteed a 180° phase shift, low insertion losses as well as good isolation below -23 dB.Other RF MEMS switches, using Au/SiN actuation electrode, are used in the design of a 2-bit and a 3-bit phase shifter. The 2-bit phase shifter demonstrated the ability to have a smooth phase shift of 0°, 96° and 186° with an approximate step size of 90°. The PCM phase change materials switches, designed in our XLIM laboratory, were also tested for the design of a phase shifter. The conceived circuit was able to reach the 180° phase shift with, however, high insertion losses. In the last project, we detailed a design of an LC reconfigurable impedance tuner. This impedance adapter is tested on the WolfSpeed CGH40010F transistor and demonstrated a good matching at the output of the transistor at 5 GH. The design of the tuner and its integration into a PCB card on a FR4 substrate are still, however, a matter of concern
Mennai, Amine. "Conception et réalisation de commutateurs RF à base de matériaux à transition de phase (PTM) et à changement de phase (PCM)." Thesis, Limoges, 2016. http://www.theses.fr/2016LIMO0035/document.
Повний текст джерелаThis research work focuses on the design and realization of RF switches based on the integration of new materials such as vanadium dioxide (VO2), Ge2Sb2Te5 (GST) and GeTe chalcogenides alloys. The operating principle of these devices is based on the resistivity change presented by these materials. VO2 exhibits a Metal-Insulator transition (MIT) around 68°C for which the material changes from an insulating state (high resistivity) to a metallic one (low resistivity). The MIT transition can be triggered in different ways (thermally, electrically and optically) with low switching time. GST and GeTe alloys have the particularity to be reversibly switched between a high resistive-amorphous state to low resistive-crystalline state, under a specific heat treatment. Thanks to the non-volatile resistivity change presented by these materials, GST/GeTe-based switches are able to operate in bistable mode. The fabricated devices exhibit good electrical performances (insertion loss and isolation) over a broadband. The aim of our work is to propose an alternative solution to conventional technologies (semiconductors and RF-MEMS), to design RF switches that can be used afterward in the design of reconfigurable devices (filters, antennas)
Wong, Heymian. "PCI Express multi-root switch reconfiguration during system operation." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/66819.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 66-67).
As the use of data continues to expand, reliance on enterprise datacenters have become more and more critical. Evaluation of modern day datacenter performance has showed that datacenter servers are severely underutilized, resulting in inefficient use of physical and software resources. In order to alleviate these concerns, datacenters must improve their resiliency, flexibility and scalability. CPU and memory virtualization are approaches that are becoming increasingly prevalent, but a major bottleneck still exists in I/O connectivity due to the physical constraints of I/O devices in a clustered system. One solution lies with the recently developed PCI Express multi-root partitionable switch. The partitionable switch is highly configurable and provides a means of altering the allocation of I/O devices amongst multiple hosts. This offers a range of unexplored possibilities to improve system flexibility. In the thesis, we investigate the feasibility of integrating and reconfiguring a PCI Express multi-root switch in a multi-host environment on a FreeBSD platform in a live system. We study modifications required of the PCI bus and system resources. We also detail the development of a device driver to handle dynamic reconfiguration of the switch and the system's PCI bus data structures.
by Heymian Wong.
M.Eng.
Kotte, Hari Babu. "High Speed (MHz) Switch Mode Power Supplies (SMPS) using Coreless PCB Transformer Technology." Licentiate thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-13964.
Повний текст джерелаKadwani, Pankaj. "Pulsed Tm-Fiber Laser for Mid-IR Generation." Doctoral diss., University of Central Florida, 2013. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5955.
Повний текст джерелаPh.D.
Doctorate
Optics and Photonics
Optics and Photonics
Optics
Hariri, Ahmad. "Etude de commutateurs hyperfréquences bistables à base des matériaux à changement de phase (PCM)." Thesis, Limoges, 2019. http://www.theses.fr/2019LIMO0013/document.
Повний текст джерелаThe work presented in this manuscript focuses on the design, simulation and realization of new microwave switches structures based on the integration of thin layers of innovative functional materials such as phase change materials (PCM) and phase transition materials. (PTM). The operating principle of these components is based on the change of resistivity present by these materials. We exploited the reversible resistivity change of GeTe of phase change materials family between the two states: amorphous with high resistivity and crystalline with low resistivity to realize a new structure of SPST switch. Then, we have integrated this switch structure on a new structure of DPDT (Double Port Double Throw) switch matrix based on phase change materials for application in satellite payload. We have used the insulatingmetal transition presented by the vanadium dioxide (VO2) of phase transition materials family to realize a new two terminals simple switch structure on a very wide frequency band (100 MHz–220 GHz)
Ambatipudi, Radhika. "Multilayered Coreless Printed Circuit Board (PCB) Step-down Transformers for High Frequency Switch Mode Power Supplies (SMPS)." Licentiate thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-13967.
Повний текст джерелаMocevic, Slavko. "PCB-Embedded Phase Current Sensor and Short-Circuit Detector for High Power SiC-Based Converters." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/84348.
Повний текст джерелаMaster of Science
Together with renewable sources, electric vehicle will play an important role as a part of sustainable and renewable energy future by significantly reducing emissions of CO2 into the atmosphere. In order to make electric cars more acceptable and accessible and make a significant impact on the environment, cost must be lowered down. To wear the cost of the electric vehicles down, powertrain of the car must be significantly improved and made smaller as well as lighter. This thesis mainly focuses on improving the reliability of the motor driving stage by implementing novel protection during fault periods such as short-circuit event. Furthermore, this novel protection allows current sensing that is crucial for motor control during normal operation periods. This will enable more compact motor driving stage since existing current sensing elements can be eliminated.
Giordani, Marco. "Integrazione tra Sistemi di Autenticazione Dipartimentale e d'Ateneo." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2015. http://amslaurea.unibo.it/8974/.
Повний текст джерелаLindström, Alexander. "GMPLS multi-layer networking Routing and constraint-based path computation in optical network segments." Thesis, KTH, Kommunikationssystem, CoS, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-91939.
Повний текст джерелаDe senaste åren har IP-baserade tjänster ökat i popularitet. För att effektivt möta de användarkrav som ställs på sådana tjänster har olika tekniker för att styra transportnätverk utvecklats. En sådan teknik, nu under utveckling för multi-lagrade nätverk, är GMPLS. GMPLS är en nödvändig nätverksteknik eftersom tillhandahållandet av sluttjänster mellan olika användare idag, och inom en överskådlig framtid, mycket sannolikt kommer att kräva samarbete mellan flera nätverkslager. Här undersöks GMPLS färdighet i optiska nätverk genom att se över det nuvarande stödet för optiska nätverkskomponenter i GMPLS standarddokument. Baserat på denna undersökning har en kandidatlösning för routing och begränsad vägberäkning i optiska nätverkssegment tagits fram. Denna kandidatlösning visas effektivt hantera de ytterligare attribut och restriktioner som existerar i optiska nätverkskomponenter.
Moozhikkal, Rahul. "Design of Resonant Converters using Silicon Carbide Power." Thesis, KTH, Skolan för elektro- och systemteknik (EES), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-201662.
Повний текст джерелаUtformningen av serie-belastade resonansomvandlare med hjälp av toppmoderna SiC högeffekttransistorernaundersöks i denna avhandlingen. SiC-enheter väljs eftersom de erbjuderlägre switch-förluster jämfört med konventionella Si-baserade enheter.En mycket detaljeradstudie om funktionen och de olika operationella tillstånden hos resonansomvandlare utförs.Avhandlingen förklarar vidare hur förmågan till högfrekvent switchning hos SiC-enheterförblir ofullständigt utnyttjad på grund av förekomsten av ströinduktanser i switch-snubberlayouten.En jämförelse av alla kommersiellt tillgängliga SiC-enheter genomförs för att hittaden mest lämpliga switchen för resonansomvandlaren. Avhandlingen utförs också en mycketdetaljerad steg-för-steg-utformning av resonansomvandlaren kretsschema och kretskortlayout.Två olika layouter föreslås och jämförs därefter utifrån deras ströinduktanser ocheffektförluster. Slutligen, baserat på experimentella resultat bekräftar avhandlingen.Lämpligheten att använda diskreta SiC-effekttransistorer istället för effektmoduler medintegrerade drivarsteg för styrelektroderna.
Jang, Kyoung-Jin. "Mitochondrial function provides instructive signals for activation-induced B cell fates." Kyoto University, 2015. http://hdl.handle.net/2433/199208.
Повний текст джерелаAlmustafa, Mohamad. "Modélisation des micro-plasmas, conception des circuits micro-ondes, Coupleur Directionnel Hybride pour Mesures et des applications en Télécommunication." Phd thesis, Toulouse, INPT, 2013. http://oatao.univ-toulouse.fr/14170/1/almustafa.pdf.
Повний текст джерелаJohansson, Simon. "Design of power supplies for Piezo LEGS and SiC experiment : KTH Student satellite MIST." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-196216.
Повний текст джерелаMIST (Miniature Student Satellite) är ett av KTH subventionerat projekt vilket har som mål att skicka upp en satellit i rymden. Projektet kommer omfatta flera olika experiment. Piezo LEGS ska undersöka en motors funktionalitet i rymdmiljö. SiC ska undersöka hur Silicon carbide halvledare och transistorer påverkas av rymdmiljön. Båda experimenten kräver varsin strömförsörjning för att fungera. Detta projekt ska undersöka kraven på strömförsörjning samt testa prototypen av ett kretskort för densamma. Först genomfördes en förstudie av de två typer av regulatorer som vanligtvis används som strömförsörjning, den linjära regulatorn och switch-mode regulatorn för att förklara olika strömförsörjningsteknologier, samt ta reda på de olika miljökraven. Baserat på förstudiens resultat erhölls kunskap för hur tester ska tas fram för funktionalitet av regulatorerna så att de når kraven för MIST för att sedan kunna producera de båda regulatorerna. Målet är att resultatet av simuleringarna på strömförsörjningen ska stämma överens med utfallet av kretskorten som produceras. Mätningar genomfördes på prototyp kretskort som visade att simuleringarna var korrekta och gav strömförsörjningen rätt resultat på kretskorten. Några av funktionerna på regulatorerna hann ej testas på grund av tidsbrist och mycket framtida arbete kvarstår.
Flagar, Vojtěch. "Měření veličin ve stavebních konstrukcích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316251.
Повний текст джерелаVecchiola, Aymeric. "Développement d’une imagerie de résistance électrique locale par AFM à pointe conductrice en mode contact intermittent." Thesis, Paris 11, 2015. http://www.theses.fr/2015PA112058/document.
Повний текст джерелаThe atomic force microscope (AFM) allows to characterize with excellent spatial resolution samples of different types of surfaces and can be implemented in various environments. This versatility has encouraged the development of a large number of derivative technics, intended to investigate various local physical properties. The LGEP thus achieved a module, the Résiscope, capable of measuring the local electrical resistance on the surface of a sample polarized continuously, on a range of 11 decades. Developed in contact mode, where the tip continuously exerts a force on the sample, this technic works well on hard materials, but finds its limits on soft or fragile samples since under certain conditions, the tip can alter the surface. For such samples, an intermittent contact mode, in which the tip comes at regular intervals touch very briefly the surface, is more appropriate, but complicates the achievement of electrical measurements. The aim of this thesis was to overcome this difficulty by changing the Résiscope to be able to join the "Pulsed Force Mode", intermittent mode where the tip oscillates at a frequency of 100Hz to 2000Hz. Different hardware and software changes have been made to permit the detailed temporal monitoring of the electrical resistance signal to each make / break contact (necessary to review the phenomena related to intermittency), as well as to be able to work in acceptable scan speeds. For imaging, the best contrasts were obtained through an electronic timing and treatment taking into account the electrical resistance values at specific times.To test this new system, we have initially compared resistance and deflection curves we get by this mode with those considered classically in the force-distance curves mode. We then investigated the influence of main parameters (frequency and amplitude of oscillation, setpoint, coating of the tips, etc.) on the topographical and electrical measurements, using the HOPG as reference material. These tests resulted to highlight a nearly systematic delay of the electrical signal relative to the deflection signal (other than the Resiscope measure time), which we were not able to elucidate the origin. Once these knowledge acquired, we studied two types of organic samples, one in academic nature - Self-Assembled Monolayers of alkanethiols (SAMs), the other more applicative purpose – formed of thin layers of an interpenetrating network of two components (P3HT:PCBM) for photovoltaic cells. In both cases we have shown the relevance of the Resiscope tool in intermittent mode to obtain qualitative and quantitative information. In addition to these work on fragile materials, we conducted an annex study on a phenomenon of growth material of insulating nature found in special conditions on various hard materials, which has been interpreted as the friction polymer formation as a result of repeatedly nano-sliding associated with the deflection of the cantilever. These investigations were conducted under a CIFRE agreement with the Concept Scientific Instruments company, backed by the ANR MELAMIN» (P2N 2011) project
YANG, YI-CHENG, and 楊毅成. "Switched-capacitor filters for PCM CODEC system." Thesis, 1986. http://ndltd.ncl.edu.tw/handle/72579877090958301577.
Повний текст джерелаTseng, Po-Hsiang, and 曾博祥. "Two-Switch PCCM Buck Converter." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/23327193030934007585.
Повний текст джерела國立臺灣海洋大學
電機工程學系
103
In this thesis, we consider the design and simulation of a pseudo-continuous conduction mode (PCCM) buck converter. Two switches are used to implement the PCCM operation.Simulation results verify the beneifit of the used PCCM buck converter.
"PCI Express-based Ethernet Switch." Master's thesis, 2012. http://hdl.handle.net/2286/R.I.14662.
Повний текст джерелаDissertation/Thesis
M.S. Electrical Engineering 2012