Добірка наукової літератури з теми "Particle packing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Particle packing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Particle packing"
Wiącek, Joanna, Mateusz Stasiak, and Jalal Kafashan. "Structural and Micromechanical Properties of Ternary Granular Packings: Effect of Particle Size Ratio and Number Fraction of Particle Size Classes." Materials 13, no. 2 (January 11, 2020): 339. http://dx.doi.org/10.3390/ma13020339.
Повний текст джерелаMiao, Yinghao, Xin Liu, Yue Hou, Juan Li, Jiaqi Wu, and Linbing Wang. "Packing Characteristics of Aggregate with Consideration of Particle size and Morphology." Applied Sciences 9, no. 5 (February 28, 2019): 869. http://dx.doi.org/10.3390/app9050869.
Повний текст джерелаZhao, Tingting, Y. T. Feng, and Yuanqiang Tan. "Characterising 3D spherical packings by principal component analysis." Engineering Computations 37, no. 3 (November 21, 2019): 1023–41. http://dx.doi.org/10.1108/ec-05-2019-0225.
Повний текст джерелаAmano, Yuto, Takashi Itoh, Hoshiaki Terao, and Naoyuki Kanetake. "Prediction of Packing Density of Milled Powder Based on Packing Simulation and Particle Shape Analysis." Materials Science Forum 534-536 (January 2007): 1621–24. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.1621.
Повний текст джерелаDodds, JohnA. "Particle packing characteristics." Powder Technology 61, no. 1 (April 1990): 101. http://dx.doi.org/10.1016/0032-5910(90)80071-6.
Повний текст джерелаDinger, Dennis R., and James E. Funk. "Particle-Packing Phenomena and Their Application in Materials Processing." MRS Bulletin 22, no. 12 (December 1997): 19–23. http://dx.doi.org/10.1557/s0883769400034692.
Повний текст джерелаChen, Yuan, Didier Imbault, and Pierre Dorémus. "Numerical Simulation of Cold Compaction of 3D Granular Packings." Materials Science Forum 534-536 (January 2007): 301–4. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.301.
Повний текст джерелаGuo, Ye, Xin Huang, and Bao Lin Zhu. "A Calculation Method for Packing Density of Powder in Paste with Continuous Grain Size Distribution." Key Engineering Materials 477 (April 2011): 125–31. http://dx.doi.org/10.4028/www.scientific.net/kem.477.125.
Повний текст джерелаRoy, D. M., B. E. Scheetz, and M. R. Silsbee. "Processing of Optimized Cements and Concretes Via Particle Packing." MRS Bulletin 18, no. 3 (March 1993): 45–49. http://dx.doi.org/10.1557/s088376940004389x.
Повний текст джерелаLee, Jong-Heon, W. Jack Lackey, and James F. Benzel. "Ternary packing of SiC and diamond particles in ethanol." Journal of Materials Research 11, no. 11 (November 1996): 2804–10. http://dx.doi.org/10.1557/jmr.1996.0355.
Повний текст джерелаДисертації з теми "Particle packing"
Chan, Ka-wai, and 陳嘉威. "Particle packing modeling incorporating the wedging effect." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hub.hku.hk/bib/B50900055.
Повний текст джерелаpublished_or_final_version
Civil Engineering
Master
Master of Philosophy
Zheng, Xiao-Qin Materials Science & Engineering Faculty of Science UNSW. "Packing of particles during softening and melting process." Awarded by:University of New South Wales. School of Materials Science & Engineering, 2007. http://handle.unsw.edu.au/1959.4/31517.
Повний текст джерелаChen, Xiaolin. "Particle packing, compaction and sintering in powder metallurgy." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0014/NQ34746.pdf.
Повний текст джерелаCaulkin, Richard. "Applications of the DigiPac Model for Particle Packing." Thesis, University of Leeds, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491658.
Повний текст джерелаChe, Lida. "Numerical constitutive laws for powder compaction using particle properties and packing arrangement." Thesis, University of Leicester, 2017. http://hdl.handle.net/2381/40677.
Повний текст джерелаChellappah, Kuhan. "A study of the filtration of fibre/particle mixtures." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6323.
Повний текст джерелаChao, Chien-Wei. "An Improved Dynamic Particle Packing Model for Prediction of the Microstructure in Porous Electrodes." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5632.
Повний текст джерелаLohmander, Sven. "The influence of particle shape of coating pigments on their packing ability and on the flow properties of coating colours." Doctoral thesis, KTH, Pulp and Paper Technology, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3044.
Повний текст джерелаThe influence of particle shape of coating pigments on theirpacking ability and on the flow properties of coating colourshas been investigated. The particle shapes considered werespherical, flaky and acicular (needle-shaped). In the case ofsuspensions containing monodisperse spherical polystyreneparticles, a concentration gradient appeared in the filter cakeforming during filtration under static conditions. Such agradient, monitoredby non-destructive magnetic resonanceimaging (MRI), is not accounted for in the traditionalfiltration theory used in coating technology. Good agreementwas found between a literature model describing filtrationthrough a compressible filter cake and the concentrationgradients measured by MRI. According to this model, the scaledconcentration gradient was the same at all times.
For flaky (mainly kaolin) and acicular (aragonite)particles, a rapid method was evaluated to estimate a shapefactor of the pigment particle. Generalised mathematical modelsof oblate and prolate spheroids were applied to reduce thethree geometrical dimensions of the particle to two, the majoraxis and the minor axis. The shape factor, which is mass-based,was derived from a comparison between the results obtained bytwo different size-assessment instruments, viz. the Sedigraphand an instrument using light scattering. This yields a shapefactor distribution as a function of equivalent sphericalparticle size, but the results are uncertain for small particlediameters, below 0.2 µm. Good agreement was obtainedbetween the shape factor and a mass-based aspect ratio obtainedby image analysis, but the rapid method is generally moreaccurate for flaky than for acicular particles.
Results obtained by capillary viscometry showed that therewas a relationship between the viscosity at high shear rates(>105s-1) and the shape factor, but that it was notsufficient to use the median value of the shape factor toachieve proper information. A more complete evaluation requiresknowledge of the shape factor distribution, which is also givenin part by the method mentioned above. However, a large medianshape factor was related to a high high-shear viscosity.Non-Newtonian entrance pressure losses were sometimessignificant in capillary viscometry, indicating that it wasinappropriate to measure the shear viscosity with only onecapillary. Such effects were however relatively much morepronounced in slit die viscometry, especially in the case ofacicular particles, where the aspect ratio was a crucialparameter. The influence of the shape factor of kaolinparticles on the non-Newtonian entrance pressure losses over aslit die was surprisingly small. The high-shear viscosity ofcoating suspensions based on different pigments correlated withthe median pore size of the corresponding coating layer ratherthan with the porosity.
Keywords: Aspect ratio, capillary viscometry, coatingcolour, filtration, particle packing, pigment, pore structure,rheology, shape factor, slit die viscometry, spheroid.
Ng, Priscilla, Priscilla Ng, and Priscilla Ng. "Simulating Particle Packing During Powder Spreading For Selective Laser Melted Additive Manufacturing Using The Discrete Element Method In Abaqus." DigitalCommons@CalPoly, 2020. https://digitalcommons.calpoly.edu/theses/2162.
Повний текст джерелаConceição, Edilene de Souza. "Influência da distribuição granulométrica no empacotamento de matérias-primas na formulação de porcelânicos." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-04112011-150732/.
Повний текст джерелаComplex materials such as porcelain and porcelain stoneware have maximized their properties when they reach high final densities after sintering. However, formulations contain at least four different raw materials, where the kaolin is the major constituent, but also quartz and feldspars. The final particle size of the mixture is controlled by a single step milling of all materials. The attempt of this paper is to make different combinations of particles size distributions of orthoclase, albite and quartz with a single particle size of kaolin by calculation of maximum packing in order to achieve maximum density crude keeping same final chemical composition. The results showed that using the concept of particle packing and optimizing the particle size distribution was possible to obtain specimens with higher density end, the lower total shrinkage, in addition to reducing the firing temperature, which directly impacts the cost of production.
Книги з теми "Particle packing"
Particle packing characteristics. Princeton, N.J: Metal Powder Industries Federation, 1989.
Знайти повний текст джерелаCumberland, D. J. The packing of particles. Amsterdam: Elsevier, 1987.
Знайти повний текст джерелаCumberland, D. J. Optimisation of packing of powder particles as an aid to solid phase compaction. Belfast: Dept. ofMech. and Industrial Engineering, The Queen's Univ. of Belfast, 1985.
Знайти повний текст джерелаYu, Aibing. Particle Packing and Transport Phenomena. Springer, 2024.
Знайти повний текст джерелаA, Willhoft Edward M., ed. Aseptic processing and packaging of particulate foods. London: Blackie Academic & Professional, 1993.
Знайти повний текст джерелаMattissen, Johanna. Sub-Types of Polysynthesis. Edited by Michael Fortescue, Marianne Mithun, and Nicholas Evans. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199683208.013.5.
Повний текст джерелаEphraim, Suhir, Lee Y. C, and Wong C. P. 1947-, eds. Micro- and opto-electronic materials and structures: Physics, mechanics, design, reliability, packaging. New York: Springer, 2007.
Знайти повний текст джерелаЧастини книг з теми "Particle packing"
Johnson, G. D. W., R. H. Ottewill, and A. R. Rennie. "Characterisation of Particle Packing." In Modern Aspects of Colloidal Dispersions, 89–99. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-6582-2_8.
Повний текст джерелаFunk, James E., and Dennis R. Dinger. "Fundamentals of Particle Packing, Monodisperse Spheres." In Predictive Process Control of Crowded Particulate Suspensions, 59–73. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0_5.
Повний текст джерелаFunk, James E., and Dennis R. Dinger. "Computer Modelling of Particle Packing Phenomena." In Predictive Process Control of Crowded Particulate Suspensions, 95–103. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0_8.
Повний текст джерелаFunk, James E., and Dennis R. Dinger. "Review of Packing in Polydisperse Particle Systems." In Predictive Process Control of Crowded Particulate Suspensions, 37–57. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0_4.
Повний текст джерелаFunk, James E., and Dennis R. Dinger. "Packing of Discrete Versus Continuous Particle Size Distributions." In Predictive Process Control of Crowded Particulate Suspensions, 85–93. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-3118-0_7.
Повний текст джерелаHendtlass, Tim. "Quantised Problem Spaces and the Particle Swarm Algorithm." In Natural Intelligence for Scheduling, Planning and Packing Problems, 175–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-04039-9_7.
Повний текст джерелаAmano, Yuto, Takashi Itoh, Hoshiaki Terao, and Naoyuki Kanetake. "Prediction of Packing Density of Milled Powder Based on Packing Simulation and Particle Shape Analysis." In Progress in Powder Metallurgy, 1621–24. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1621.
Повний текст джерелаSmith, P. A., and R. A. Haber. "Use of Particle Packing in Optimization of Slurry Solid Loading." In Materials & Equipment/Whitewares: Ceramic Engineering and Science Proceedings, Volume 10, Issue 1/2, 1–11. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470310526.ch1.
Повний текст джерелаIwai, Takashi, Chu-Wan Hong, and Peter Greil. "DEM Simulation of Particle Packing Behavior in Colloidal Forming Processes." In Microstructures, Mechanical Properties and Processes - Computer Simulation and Modelling, 53–57. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527606157.ch9.
Повний текст джерелаPedersen, L. G., and L. M. Ottosen. "Fine Recycled Concrete Aggregates Particle Morphological Parameters and Packing Properties." In Concrete Durability and Service Life Planning, 33–36. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43332-1_7.
Повний текст джерелаТези доповідей конференцій з теми "Particle packing"
Yang, Jian, Qiuwang Wang, and Min Zeng. "Numerical Study of Flow and Heat Transfer in Novel Structure Packed Beds." In ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/ht2009-88145.
Повний текст джерелаShi, Yu, and Yuwen Zhang. "Simulation of Random Packing of Spherical Particles With Different Size Distributions." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15271.
Повний текст джерелаReichart, Markus, Martina Neises-von Puttkamer, Reiner Buck, and Robert Pitz-Paal. "Numerical Assessment of Packing Structures for Gas-Particle Trickle Flow Heat Exchanger for Application in CSP Plants." In ASME 2021 15th International Conference on Energy Sustainability collocated with the ASME 2021 Heat Transfer Summer Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/es2021-62746.
Повний текст джерелаGurrum, Siva P., Jie-Hua Zhao, and Darvin R. Edwards. "Design Optimization of Material Properties in a Particle-Filled Composite Material System." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66646.
Повний текст джерелаAn, Xizhong, Fei Huang, Runyu Yang, and Aibing Yu. "DEM Simulation on the Packing of Two-Modal Spheres under One-Dimensional Vibration." In 5th Asian Particle Technology Symposium. Singapore: Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-2518-1_215.
Повний текст джерелаYuksel, Anil, Michael Cullinan, and Jayathi Murthy. "Polarization Effect on Out of Plane Configured Nanoparticle Packing." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3075.
Повний текст джерелаLi, Zhifeng, Liangzhi Cao, Hongchun Wu, Chenghui Wan, and Tianliang Hu. "Effects of Applying the Implicit Particle Fuel Model for Pebble-Bed Reactors." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60382.
Повний текст джерелаYoshida, Mikio, Hiroaki Yamamoto, Jun Oshitani, and Kuniaki Gotoh. "Effect of Diameter and Coverage Ratio of Admixed Particle on Packing Fraction in Particle-Bed." In 5th Asian Particle Technology Symposium. Singapore: Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-2518-1_178.
Повний текст джерелаShin, Y. B., and E. Kita. "Application of particle swarm optimization to the item packing problem." In OPTI2012. Southampton, UK: WIT Press, 2012. http://dx.doi.org/10.2495/op120211.
Повний текст джерелаDu, Wenchao, Xiaorui Ren, Yexiao Chen, Chao Ma, Miladin Radovic, and Zhijian Pei. "Model Guided Mixing of Ceramic Powders With Graded Particle Sizes in Binder Jetting Additive Manufacturing." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6651.
Повний текст джерела