Статті в журналах з теми "Out-Of-Autoclave Consolidation"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-24 статей у журналах для дослідження на тему "Out-Of-Autoclave Consolidation".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Centea, T., and P. Hubert. "Out-of-autoclave prepreg consolidation under deficient pressure conditions." Journal of Composite Materials 48, no. 16 (July 8, 2013): 2033–45. http://dx.doi.org/10.1177/0021998313494101.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, and Naresh Kumar Naidu. "High-Pressure FDM 3D Printing in Nitrogen [Inert Gas] and Improved Mechanical Performance of Printed Components." Journal of Composites Science 7, no. 4 (April 10, 2023): 153. http://dx.doi.org/10.3390/jcs7040153.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, Harshavardhan Reddy Katherapalli, and Aarif Shaik. "3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts." Journal of Composites Science 6, no. 1 (January 5, 2022): 16. http://dx.doi.org/10.3390/jcs6010016.
Повний текст джерелаSaenz-Castillo, Diego, María I. Martín, Vanessa García-Martínez, Abhiram Ramesh, Mark Battley, and Alfredo Güemes. "A comparison of mechanical properties and X-ray tomography analysis of different out-of-autoclave manufactured thermoplastic composites." Journal of Reinforced Plastics and Composites 39, no. 19-20 (May 7, 2020): 703–20. http://dx.doi.org/10.1177/0731684420924081.
Повний текст джерелаHelmus, Rhena, Timotei Centea, Pascal Hubert, and Roland Hinterhölzl. "Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling." Journal of Composite Materials 50, no. 10 (June 24, 2015): 1403–13. http://dx.doi.org/10.1177/0021998315592005.
Повний текст джерелаDrakonakis, Vasileios M., James C. Seferis, and Charalambos C. Doumanidis. "Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation." Advances in Materials Science and Engineering 2013 (2013): 1–14. http://dx.doi.org/10.1155/2013/356824.
Повний текст джерелаMahmood, Amjed Saleh, John Summerscales, and Malcolm Neil James. "Resin-Rich Volumes (RRV) and the Performance of Fibre-Reinforced Composites: A Review." Journal of Composites Science 6, no. 2 (February 10, 2022): 53. http://dx.doi.org/10.3390/jcs6020053.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, Aarif Shaik, Mustafa Mohammed, and Harshavardhan Reddy Katherapalli. "Effect of Autoclave Pressure and Temperature on Consolidation of Layers and Mechanical Properties of Additively Manufactured (FDM) Products with PLA." Journal of Manufacturing and Materials Processing 5, no. 4 (October 27, 2021): 114. http://dx.doi.org/10.3390/jmmp5040114.
Повний текст джерелаHelmus, R., R. Hinterhölzl, and P. Hubert. "A stochastic approach to model material variation determining tow impregnation in out-of-autoclave prepreg consolidation." Composites Part A: Applied Science and Manufacturing 77 (October 2015): 293–300. http://dx.doi.org/10.1016/j.compositesa.2015.03.021.
Повний текст джерелаRizzolo, Robert, Daniel Walczyk, Jaron Kuppers, Daniel Montoney, and Richard Galloway. "Rapid consolidation and curing of advanced composites using electron beam irradiation." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 4 (April 28, 2018): 1168–81. http://dx.doi.org/10.1177/0954405418769950.
Повний текст джерелаHeil, Joseph P., Mark A. Wadsworth, Kerrick R. Dando, Ron E. Jones, Matt Tymes, Sam J. Slater, Rodney E. Bahr, and Bryan T. Bearden. "Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study." SAMPE JOURNAL 59, no. 6 (November 2023): 9–18. http://dx.doi.org/10.33599/sj.v59no6.01.
Повний текст джерелаVarkonyi, Balazs, Jonathan P. H. Belnoue, James Kratz, and Stephen R. Hallett. "Predicting consolidation-induced wrinkles and their effects on composites structural performance." International Journal of Material Forming 13, no. 6 (November 16, 2019): 907–21. http://dx.doi.org/10.1007/s12289-019-01514-2.
Повний текст джерелаLink, Tobias, Philipp Rosenberg, and Frank Henning. "Prediction of Gaps in Automated Tape Laying and Their Influence on Porosity in Consolidated Laminates." Journal of Composites Science 6, no. 7 (July 15, 2022): 207. http://dx.doi.org/10.3390/jcs6070207.
Повний текст джерелаHoskins, David, and Genevieve Palardy. "High-speed consolidation and repair of carbon fiber/epoxy laminates through ultrasonic vibrations: A feasibility study." Journal of Composite Materials 54, no. 20 (January 28, 2020): 2707–21. http://dx.doi.org/10.1177/0021998320903097.
Повний текст джерелаProietti, Alice, Leandro Iorio, Nicola Gallo, Marco Regi, Denise Bellisario, Fabrizio Quadrini, and Loredana Santo. "Recycling of Carbon Fiber Laminates by Thermo-mechanical Disassembly and Hybrid Panel Compression Molding." Materiale Plastice 59, no. 1 (April 5, 2022): 44–50. http://dx.doi.org/10.37358/mp.22.1.5558.
Повний текст джерелаYassin, Khaled, and Mehdi Hojjati. "Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods." Journal of Thermoplastic Composite Materials 31, no. 12 (November 26, 2017): 1676–725. http://dx.doi.org/10.1177/0892705717738305.
Повний текст джерелаZucco, G., V. Oliveri, M. Rouhi, R. Telford, G. Clancy, C. McHale, R. O’Higgins, T. M. Young, P. M. Weaver, and D. Peeters. "Static test of a variable stiffness thermoplastic composite wingbox under shear, bending and torsion." Aeronautical Journal 124, no. 1275 (January 22, 2020): 635–66. http://dx.doi.org/10.1017/aer.2019.161.
Повний текст джерелаVidrih, Tadej, Peter Winiger, Zafiris Triantafyllidis, Valentin Ott, and Giovanni P. Terrasi. "Investigations on the Fatigue Behaviour of 3D-Printed Continuous Carbon Fibre-Reinforced Polymer Tension Straps." Polymers 14, no. 20 (October 11, 2022): 4258. http://dx.doi.org/10.3390/polym14204258.
Повний текст джерелаMaes, Vincent K., Arjun Radhakrishnan, Jamie Hartley, Stuart Sykes, and James Kratz. "Tracking consolidation of out-of-autoclave prepreg corners using pressure sensors." Composites Part A: Applied Science and Manufacturing, August 2022, 107172. http://dx.doi.org/10.1016/j.compositesa.2022.107172.
Повний текст джерелаIorio, Leandro, Fabrizio Quadrini, Nicola Gallo, and Loredana Santo. "Out-of-autoclave molding of carbon fiber laminates by consolidation with shape memory polymer foams." Journal of Composite Materials, September 19, 2023. http://dx.doi.org/10.1177/00219983231204117.
Повний текст джерелаSaffar, Florence, Camille Sonnenfeld, Pierre Beauchêne, and Chung Hae Park. "In-situ Monitoring of the Out-Of-Autoclave Consolidation of Carbon/Poly-Ether-Ketone-Ketone Prepreg Laminate." Frontiers in Materials 7 (June 25, 2020). http://dx.doi.org/10.3389/fmats.2020.00195.
Повний текст джерелаIorio, Leandro, Denise Bellisario, Nicola Gallo, Claudia Papa, Marco Regi, Daniele Santoro, Fabrizio Quadrini, and Loredana Santo. "Anisogrid lattice cylinders made of thermoplastic composite under buckling loading." ESAFORM 2021, April 10, 2021. http://dx.doi.org/10.25518/esaform21.2798.
Повний текст джерелаRizzolo, Robert, Daniel F. Walczyk, and Daniel Montoney. "The Effect of Electron Beam Irradiation on Elastomers Used in Tooling for Composites Manufacturing." Journal of Manufacturing Science and Engineering, January 2, 2021, 1–8. http://dx.doi.org/10.1115/1.4049493.
Повний текст джерелаBecerra, Luis Humberto Campos, Marco Antonio Loudovic Hernández Rodríguez, Raúl Lesso Arroyo, Hugo Esquivel Solís, and Alejandro Torres Castro. "Effect of sterilization on 3-point dynamic response to in vitro bending of an Mg implant." Biomaterials Research 25, no. 1 (April 6, 2021). http://dx.doi.org/10.1186/s40824-021-00207-9.
Повний текст джерела