Добірка наукової літератури з теми "Out-Of-Autoclave Consolidation"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Out-Of-Autoclave Consolidation".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Out-Of-Autoclave Consolidation"
Centea, T., and P. Hubert. "Out-of-autoclave prepreg consolidation under deficient pressure conditions." Journal of Composite Materials 48, no. 16 (July 8, 2013): 2033–45. http://dx.doi.org/10.1177/0021998313494101.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, and Naresh Kumar Naidu. "High-Pressure FDM 3D Printing in Nitrogen [Inert Gas] and Improved Mechanical Performance of Printed Components." Journal of Composites Science 7, no. 4 (April 10, 2023): 153. http://dx.doi.org/10.3390/jcs7040153.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, Harshavardhan Reddy Katherapalli, and Aarif Shaik. "3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts." Journal of Composites Science 6, no. 1 (January 5, 2022): 16. http://dx.doi.org/10.3390/jcs6010016.
Повний текст джерелаSaenz-Castillo, Diego, María I. Martín, Vanessa García-Martínez, Abhiram Ramesh, Mark Battley, and Alfredo Güemes. "A comparison of mechanical properties and X-ray tomography analysis of different out-of-autoclave manufactured thermoplastic composites." Journal of Reinforced Plastics and Composites 39, no. 19-20 (May 7, 2020): 703–20. http://dx.doi.org/10.1177/0731684420924081.
Повний текст джерелаHelmus, Rhena, Timotei Centea, Pascal Hubert, and Roland Hinterhölzl. "Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling." Journal of Composite Materials 50, no. 10 (June 24, 2015): 1403–13. http://dx.doi.org/10.1177/0021998315592005.
Повний текст джерелаDrakonakis, Vasileios M., James C. Seferis, and Charalambos C. Doumanidis. "Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation." Advances in Materials Science and Engineering 2013 (2013): 1–14. http://dx.doi.org/10.1155/2013/356824.
Повний текст джерелаMahmood, Amjed Saleh, John Summerscales, and Malcolm Neil James. "Resin-Rich Volumes (RRV) and the Performance of Fibre-Reinforced Composites: A Review." Journal of Composites Science 6, no. 2 (February 10, 2022): 53. http://dx.doi.org/10.3390/jcs6020053.
Повний текст джерелаShaik, Yousuf Pasha, Jens Schuster, Aarif Shaik, Mustafa Mohammed, and Harshavardhan Reddy Katherapalli. "Effect of Autoclave Pressure and Temperature on Consolidation of Layers and Mechanical Properties of Additively Manufactured (FDM) Products with PLA." Journal of Manufacturing and Materials Processing 5, no. 4 (October 27, 2021): 114. http://dx.doi.org/10.3390/jmmp5040114.
Повний текст джерелаHelmus, R., R. Hinterhölzl, and P. Hubert. "A stochastic approach to model material variation determining tow impregnation in out-of-autoclave prepreg consolidation." Composites Part A: Applied Science and Manufacturing 77 (October 2015): 293–300. http://dx.doi.org/10.1016/j.compositesa.2015.03.021.
Повний текст джерелаRizzolo, Robert, Daniel Walczyk, Jaron Kuppers, Daniel Montoney, and Richard Galloway. "Rapid consolidation and curing of advanced composites using electron beam irradiation." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 4 (April 28, 2018): 1168–81. http://dx.doi.org/10.1177/0954405418769950.
Повний текст джерелаДисертації з теми "Out-Of-Autoclave Consolidation"
Centea, Timotei. "Material - processing - quality relationships during the consolidation of out-of autoclave prepregs." Thesis, McGill University, 2013. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=116940.
Повний текст джерелаLa mise-en-forme de pré-imprégnés hors-de-l'autoclave est une nouvelle méthode de fabrication de composites haute-performance qui cherche à réduire les coûts et à augmenter la flexibilité par rapport à la fabrication traditionnelle par l'autoclave. Les pré-imprégnés hors-de-l'autoclave peuvent être mis en forme sous un sac à vide, dans un four conventionnel. Pour limiter la porosité, ils comportent des zones sèches qui permettent l'évacuation de gaz au début de la mise-en-forme et qui doivent ensuite être infiltrées par la résine. Cette thèse présente une investigation en quatre parties de la consolidation de tels pré-imprégnés, avec une emphase particulière sur le phénomène et les défauts induits par d'écoulement.En premier lieu, une nouvelle approche basée sur la microtomographie par rayons X a été utilisée avec succès pour déterminer la microstructure initiale d'un pré-imprégné hors-de-l'autoclave typique et pour suivre son évolution pendant la mise-en-forme. Les résultats ont démontré que, initialement, le pré-imprégné était constitué de noyaux de faisceaux de fibres entourés de zones riches en résine et de macro-pores, et que deux phénomènes ont prit place pendant la mise-en-forme: la disparition progressive des macro-pores due à l'évacuation des gaz à température ambiante, et l'imprégnation des faisceaux à températures élevées. En deuxième lieu, un modèle analytique décrivant l'imprégnation des faisceaux à été développé pour trois pré-imprégnés hors-de-l'autoclave, et utilisé pour une étude paramétrique afin d'évaluer l'effet de plusieurs propriétés des matériaux et paramètres de mise-en-forme. Les résultats ont démontré que l'imprégnation des faisceaux peut avoir lieu dans la majorité des cas, mais que des déviations des situations idéales peuvent causer une imprégnation incomplète et de la microporosité induite par l'écoulement. Ensuite, les effets du cycle de température et du temps d'exposition aux conditions ambiantes ont été étudiés par la caractérisation des matériaux, la fabrication de laminés et l'analyse de leur microstructure. Les résultats ont démontré que le temps d'exposition aux conditions ambiantes a un effet néfaste sur les propriétés de la résine, sur les phénomènes prenant lieu durant la mise-en-forme et sur la micro-porosité dans les faisceaux des pièces fabriquées; toutefois, ils ont aussi démontré que certains cycles de température ont mitigé ou même éliminé ces défauts. Ces résultats ont aussi été comparés aux prédictions du modèle, démontrant que ce dernier a capturé les tendances observées, mais qu'il a sous-prédit la taille des micro-porosités pour les cas d'exposition élevée aux conditions ambiantes. Finalement, les effets de quatre cas de consolidation déficiente (l'application de vide répétée, la pression ambiante réduite, le vide réduit et l'évacuation d'air restreinte) ont été étudiés expérimentalement par la mise-en-forme de laminés et l'évaluation de leur qualité. Les résultats ont établi que la pression ambiante réduite, le vide réduit et l'évacuation d'air restreinte ont des effets néfastes spécifiques sur les phénomènes de consolidation et sur la macro- et micro-porosité dans les pièces fabriquées, et clarifié l'ampleur permissible de telles déficiences pour des laminés d'une qualité acceptable. Globalement, cette thèse a contribué à des plus amples connaissances et une meilleure compréhension de la mise-en-forme de pré-imprégnés hors-de-l'autoclave. Premièrement, les principaux phénomènes prenant lieu pendant ce procédé ont été identifiés. Deuxièmement, les effets de plusieurs propriétés des matériaux, paramètres de mise-en-forme et déviations des conditions idéales ont été évalués afin d'aider à l'optimisation et de définir les fenêtres permissibles de variation pour une mise-en-forme réussie. Finalement, de nouvelles méthodes expérimentales et de modélisation ont été proposées pour aider la caractérisation des matériaux, l'analyse de procédés et la prédiction de qualité.
Ziegenbein, Jordan Michael. "Magnetic clamping structures for the consolidation of composite laminates." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/43588.
Повний текст джерелаArquier, Raphaël. "Etude des phénomènes physico-chimiques en jeu lors de la consolidation hors autoclave de composites PEKK/FC." Electronic Thesis or Diss., Paris, HESAM, 2023. http://www.theses.fr/2023HESAE017.
Повний текст джерелаCarbon Fiber/High performance thermoplastic matrix composites are of great interest for the aeronautical industry, for the reduction of process times as well as for their potential ability to be welded and recycled compared to their thermoset matrix-based composites counterparts. In this context, the HAICoPAS (Highly Automatized Integrated Composites for Performing Adaptable Structures) collaborative project, built around an industrial and academic consortium and led by Hexcel and Arkema, aims to develop the entire production chain of a continuous carbon fiber reinforced composite with a PEKK (Polyetherketoneketone) matrix. This goes from the pre-impregnation of the tape to the welding of real parts capable of meeting industrial requirements, in particular, consolidate parts in out-of-autoclave (OOA) system with a porosity rate inferior to 1%.As the resorption of intra or interply voids requires a local flow of the whole composite, squeeze flow rheological tests have been modeled to understand the viscous behavior of this highly filled system. The power law viscosity parameters have been identified at 1 bar, as well as an unexpected increase of these parameters with the applied pressure which has been related to "shear banding". Then, consolidation experiments under vacuum bag in an oven, coupled with model rheological tests reproducing the same time-temperature-pressure cycle, have highlighted the process / microstructure / mechanical properties relationships induced. A good dispersion of fibers along with few porosities confined in dry areas is necessary to facilitate the out of autoclave consolidation of the composite. Also, an increase in the interlaminar shear strength (ILSS), observed with consolidation time, was found to be related to the homogenization of the {fibers + matrix} distribution at the interplies rather than to the more usually considered porosity rate. Finally, the important role played by the volatiles and the moisture content in particular, in the consolidation of the composite was identified
Тези доповідей конференцій з теми "Out-Of-Autoclave Consolidation"
Bellisario, D., F. Quadrini, L. Santo, L. Iorio, N. Gallo, and S. Corvaglia. "Out-of-Autoclave Repair of Composite Laminates by Using Shape Memory Polymer Foams." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2765.
Повний текст джерелаBELLISARIO, D. "Out-of-autoclave molding of carbon fiber composites pipes with interlaminar carbon nanotubes." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-194.
Повний текст джерелаKULKARNI, SIDDHESH S., KAMRAN A. KHAN, and REHAN UMER. "QUASI-LINEAR VISCOELASTIC MODELLING OF UNCURED PREPREGS UNDER COMPACTION." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35952.
Повний текст джерелаDEITZEL, JOSEPH, DIRK HEIDER, ROGER CRANE, and TEKIN OZDEMIR. "STABILIZATION OF TUFF MATERIAL BY ELECTROSPINNING OF LOW AREAL WEIGHT TPU VEIL MATERIAL." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35855.
Повний текст джерела