Дисертації з теми "Other industrial"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Other industrial".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Tennberg, Hannes. "WOODEN : in other forms." Thesis, Konstfack, Inredningsarkitektur & Möbeldesign, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-6347.
Повний текст джерелаAndersson, Moa. "Product development and design of industrial sensors." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Produktutveckling - Industridesign, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-36113.
Повний текст джерелаIoT-teknologi, Internet of Things, är en snabbt växande marknad, det innebär att mer och mer produkter, kläder, även människor förses med sensorer som i sin tur kan förstå omgivningen och kommunicera, detta för att skapa ett smartare samhälle. För att företag ska kunna vidhålla positionen på marknaden är det viktigt att hela tiden erbjuda produkter med bättre komponenter och mindre till storleken. För skapa en starkare position, företaget borde erbjuda revolutionerande produkter med unika egenskaper. Det är en av de här idéerna som har undersökts i det här examensarbetet. Arbetet har skett under ett samarbete med företaget CombiQ, belägen i Jönköping. Produkten som skulle tas fram var en industriell sensor, som skulle använda sig av IIoT-teknologin, Industrial Internet of Things, som företaget utvecklar. Tidpunkten när det här arbete utfördes, CombiQ hade inga egna produkter men all teknologi som sitter i sensorerna. För att ta fram en industriell sensor för CombiQ behövde inte bara möjligheterna att tillverka en produkt utefter funktionerna undersökas. Varumärket behövde även analyseras för att utveckla en produkt som uttrycker företaget och dess varumärke på rätt sätt. Genom att tillämpa metoder och verktyg från både produktutvecklingsprocesser och designprocesser, kunde ett koncept tas fram som uppfyllde de uppställda kraven och funktionerna. Den huvudsakliga funktionen i sensorn var att produkten skulle bestå av moduler och på det viset kunna justeras utefter vad kunden behöver. Vidare, under projektet har även CombiQ som varumärke undersökts och riktlinjer för designen har tagits fram som reflekterar företaget och dess varumärke. Design riktlinjerna kan användas för att ta fram ytterligare produkter med samma maner, vilket har visats i detta arbete genom att ta fram designkoncept på ytterligare produkter som räknas till samma produktfamilj som sensorn med moduler.
Kahn, Kenneth B. "Marketing's integration with other departments." Diss., Virginia Tech, 1994. http://hdl.handle.net/10919/39734.
Повний текст джерелаPh. D.
Sisman, Osman. "Ethics For Industrial Design: An Ethico-political Critique Of Sustainability In Industrial Design." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606800/index.pdf.
Повний текст джерелаLee, Wing-kin, and 李永健. "Revitalization of industrial buildings in San Po Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B31987151.
Повний текст джерелаParedes, Julio Jose Prado Lucio. "Essays on the effects of clusters and networks on industrial growth during the great recession and other period of industrial shocks." Thesis, Lancaster University, 2016. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.722594.
Повний текст джерела莊禮豪 and Lai-ho Daniel Chong. "Remodeling of industrial buildings in Kowloon Bay." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31986377.
Повний текст джерелаPuñal, Pereira Pablo. "Efficient IoT Framework for Industrial Applications." Doctoral thesis, Luleå tekniska universitet, EISLAB, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-95.
Повний текст джерелаHagberg, Anna. "Industrial wastewater treatment and other environmental problems in Wuhan : Is Swedish technology a solution?" Thesis, Uppsala University, Department of Earth Sciences, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-88828.
Повний текст джерелаÅr 2000 startades ett samarbete mellan Wuhan i Kina och Borlänge Energi i Sverige. De två parterna bestämde år 2005 tillsammans med IVL, Svenska Miljöinstitutet, att samarbeta inom följande områden; hållbar energiproduktion, hållbar avfallsproduktion samt grundandet av ett miljöteknikcentrum i Wuhan. Miljöteknikcentrumet är till för att vara en plattform för svensk miljöteknik och expertis. Som ett första steg inför grundandet av ett miljöteknikcentrum gjordes en undersökning för att se inom vilka sektorer svensk miljöteknik kan etableras.
Undersökningen var inriktat på industriell avloppsvattenrening i Wuhan; bedömning av vilka typer av industrier/företag som har problem med avloppsvattenreningen och i vilken utsträckning det finns svenska tekniklösningar på problemen. Undersökningen genomfördes genom intervjuer med myndigheter och en del utvalda företag. Det var svårt att få fram information om vilka företag som inte följer de kinesiska gränsvärdena, varför en del besök gjordes till företag som lever upp till gränsvärdena. På grund av detta togs även andra problem med miljön som företagen hade upp. Några kommunala reningsverk besöktes och intervjuades också för att få en bättre bild av den kommunala vattenreningssituationen. En generell beskrivning av Wuhans miljösituation utfördes också samt en beskrivning av de viktigaste miljömyndigheterna och institutionerna.
Wuhans största utmaning är att konstruera reningsverk till alla de 3.5 miljoner som fortfarande släpper sitt avloppsvatten rätt ut till sjöar och floder, snarare än att ytterligare rena det industriella avloppsvattnet. Behandlingsgraden av det industriella avloppsvattnet har nått 97 % medan behandlingsgraden av det kommunala avloppsvattnet endast nått 70 %.
Besök vid de utvalda företagen och kommunala reningsverk ledde till slutsatsen att svensk teknik och expertis kan införas i följande områden: hantering av slam från reningsverk, byggandet av förbränningsanläggningar för sopor och hur man löser problemet med att rena luften från gaser som SO2 och dioxiner. De flesta företagen kunde följa de kinesiska gränsvärdena för utsläpp av avloppsvatten men mycket kan göras för att förbättra företagens tekniker ytterligare. Detta utförs dock nästan aldrig eftersom det är en ekonomisk fråga. Det är möjligt för Wuhan att sätta lokala, hårdare gränsvärlden för att tvinga företagen att förbättra sina reningstekniker ytterligare.
In 2000 a co-operation between Wuhan in China and Borlänge Energi in Sweden started. The two parts decided in 2005 together with IVL, the Swedish Research Institute, to co-operate in the fields of sustainable energy production, sustainable waste management and the establishment of an Environmental Technology Centre, supplying Swedish environmental expertise to companies in Wuhan. As a first step for the establishment of an Environmental Technology Centre in Wuhan, an investigation was made to find out in which sectors Swedish environmental technology could be established.
The investigation took aim at observing the industrial wastewater treatment in Wuhan and to see which types of companies that have problems with the wastewater treatment and if there existed Swedish technology that could solve the problems. The investigation was performed through interviews with the authorities and some selected companies. It was difficult to get information about companies that did not comply with the National Chinese wastewater standards. This meant that some of the visits were made to companies that comply with the standards, also taking into consideration other problems with the environment that the companies might have. Visits were also paid to municipal wastewater treatment plants to get an overview over the municipal wastewater treatment situation. An overall survey of the environmental situation in Wuhan was also made and a presentation of the most important environmental departments and institutions is given.
The greatest challenge for Wuhan is to construct wastewater treatment plants for the around 3.5 million people that still discharge their wastewater directly to rivers and lakes, rather than to improve the industrial wastewater treatment further. The treatment rate of the industrial wastewater has reached 97%, but the municipal wastewater treatment rate has only reached 70%.
After the visits to the selected companies and municipal wastewater treatment plants the conclusion was made that Swedish technologies and expertise can be applied to the following areas; handling sludge from the wastewater treatment plants, construction of waste incineration plants and handling flue gas and dioxins. Most of the visited companies could follow the wastewater standards. Although much can be done to improve their technologies further, this is not done since it is too expensive. It is possible for Wuhan to apply stricter local wastewater treatment standards. This could be used as a tool to make companies invest more money in improvements of their technologies.
Ahirwal, Deepak. "Large deformation shear and elongation rheology of polymers for electrospinning and other Industrial Processes." Phd thesis, Université de Strasbourg, 2013. http://tel.archives-ouvertes.fr/tel-01065971.
Повний текст джерелаSearle, Diane. "The industrial use of inorganic tin compounds in coal conversion processes and other systems." Thesis, City University London, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292720.
Повний текст джерелаPeake, Laura Ann. "The Manassas Industrial School for Colored Youth, 1894-1916." W&M ScholarWorks, 1995. https://scholarworks.wm.edu/etd/1539625943.
Повний текст джерелаStandifer, Rhetta Long. "Business-to-business electronic commerce relationships : the impact of B2B structure and other relational antecedents upon conflict and perceived success /." free to MU campus, to others for purchase, 2004. http://wwwlib.umi.com/cr/mo/fullcit?p3137751.
Повний текст джерелаHoskins, Brian James. "Solid-state fermentation to improve the value of distillers grains and other agro-industrial residues." Thesis, Heriot-Watt University, 2008. http://hdl.handle.net/10399/2194.
Повний текст джерелаMartinson, Emil. "Robust gas flow metering under extreme industrial conditions." Licentiate thesis, Luleå : Luleå university of technology, 2009. http://pure.ltu.se/ws/fbspretrieve/3315568.
Повний текст джерелаMartin, Michael. "Industrial Symbiosis for the development of Biofuel Production." Licentiate thesis, Linköpings universitet, Industriell miljöteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-62675.
Повний текст джерелаYu, Wing-mei, and 余詠薇. "Adaptive re-use of urban industrial heritage buildings for cultural and creative industries in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B47092944.
Повний текст джерелаpublished_or_final_version
Conservation
Master
Master of Science in Conservation
Chao, C. L. "Investigations of the machining of glasses and other normally brittle materials in the ductile regime." Thesis, Cranfield University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.302733.
Повний текст джерелаChan, Ming-chung, and 陳銘冲. "An analysis of the revitalization of industrial buildings in HongKong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B50254455.
Повний текст джерелаAbdulrazzaq, Mohammed, та Yuan Wei. "Industrial Control System (ICS) Network Asset Identification and Risk Management". Thesis, Högskolan i Halmstad, Akademin för informationsteknologi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-38198.
Повний текст джерелаJohansson, Emma. "Trådmöbler : Utomhusmöbler." Thesis, Gotland University, School of the Humanities and Social Science, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-373.
Повний текст джерелаMålet med detta examensarbete var att ta fram en sittmöbel för utomhusbruk, som man kan ha ute i trädgården, på verandan eller balkongen. Syftet var att utöka Mazes produkt sortiment och göra en möbel som speglar företaget. Materialet är tråd av stål och är så pass stark att trots dess tunnhet att man kan bygga stabila konstruktioner. Tre skiss koncept togs fram och två av dessa tre valdes tillsammans med företaget att gå vidare med. Efter att ha utvecklat de båda stolarna så var Kent Johansson på Maze nöjd. En av stolarna, dvs koncept två har på Backstigs tillverkats i skala 1:1. Stolarna kommer ha en sittdyna som tillverkas i filt. Dynan kommer bestå av två lagar för att få en styvhet och en mjukhet på dynan. Dynan till koncept två kommer inte behöva formpressas med däremot så kommer dynan till koncept tre att formpressas efter stolens form.Resultatet blev två olika stolar för Maze. Båda stolarna är till för att stå utomhus, men går lika väl att använda på altanen eller balkongen.
Antipova, Kaidi. "Flaska för mineralvatten." Thesis, Gotland University, Institutionen för humaniora och samhällsvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-517.
Повний текст джерелаSyftet med detta projekt var att ta fram ett säljande koncept av flaskan och även etiketten till mineralvatten. Problemet med dagens vattenflaskor som finns på den ryska marknaden är att samtliga har liknande utseende, form och riktar sig till samma målgrupp. Målgruppen flaskorna riktar sig till är sportintresserade människor och de som lever ett aktivt liv. Till 90 procent är flaskorna gjorda utav PET -plast.
Målsättningen för mitt projektarbete var att produkten ska säljas till restauranger/krogar, caféer, utställningar, hotell, mässor och vid andra speciella tillfällen. Tanken är att skapa och erbjuda en exklusivare produkt för kunderna och därmed kunna öka vattnets värde. Företaget ska även kunna öka produktionen av produkter på den nuvarande marknaden och konkurrera med andra företag i samma bransch.
Med hjälp av en referensgrupp och undersökningar har jag tagit fram en vattenflaska i glas med en aluminium skruvkork och etikett som skiljer sig från de befintliga vattenflaskorna.
The aim of this project was to develop a new, more exclusive concept of packaging and labels for mineral water. The main problem with today's bottles for water which we have on the russian market, is that bottles have the same form, are very similar to each other, are intended mainly for the same target group, with sport interests and active way of life and that almost all bottles are made of plastic (PET). The goal for my project is to create a new variant of bottles for water that will be selling to restaurants, café, pubs, fares and other special occasions and to increase value of water through developing a more exclusive product. Using the reference group and studies I have produced a bottle for water which is made of glass, has an aluminium screwing cork and designed label which is different from the other products in the same trade.
Hellström, Joakim. "Flexibla förpackningar." Thesis, Gotland University, School of the Humanities and Social Science, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-602.
Повний текст джерелаTillsammans med Konsthantverkcentrum (KHVC) ska ett förpackningskoncept skapas somgör svenska konsthantverkares produkter mer attraktiva, förena konsthantverkare runtom Sverige och göra dem konkurrenskraftigare internationellt. Förpackningskonceptet måste passa så många konsthantverk som möjligt oavsett material p.g.a. att produkterna inte kommer i stora serier, de är i många fall rent unika. Till en början har uppgiften analyserats och avgränsats till att se till tre konsthantverkskooperativs förhållning och behov för att sätta en kravspecifikation på förpackningen. Faktainsamlingen har bestått av att ta fram all information om dagens förpackningar av konsthantverk, både inom och utom kooperativen. Genomförande har bestått av skisser och formanalyser som till slut tagit fram en flexibel standardförpackning som kan packa många former och storlekar. Resultatet är en ny produkt som ska konkurrera med dagens förpackningsprodukter i design, metod och pris.
Han-Suck, Song. "Risk management of the housing market : with a focus on low income households." Licentiate thesis, KTH, School of Architecture and the Built Environment (ABE), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-398.
Повний текст джерелаSalonen, Antti. "Formulation of Maintenance Strategies." Licentiate thesis, Mälardalen University, School of Innovation, Design and Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-4836.
Повний текст джерелаIn industry, there is a constant demand for increased productivity in order to stay competitive. Still, Swedish industry has an average utilization of about 60% in its production systems. One important factor for increasing the equipment utilization is effective maintenance of production assets.
Within process industry a strategic view on maintenance activities is common and most companies regard maintenance as a profit centre. Meanwhile, the discrete units manufacturing industry still in many cases view maintenance as a cost driver. However, with the spread of Toyota-inspired production concepts, the manufacturing industry is beginning to view maintenance as a strategic asset. Still, though, many companies have no formulated maintenance strategy.
The main purpose of the research, presented in this thesis, has been to develop a work-process for formulation of effective maintenance strategies for enterprises in the manufacturing industry.
Through one descriptive and two prescriptive case studies a work-process for formulation of maintenance strategies has been developed. The descriptive study revealed some of the differences between companies with and without maintenance strategies. It also showed how some companies view the strategic contributions of maintenance. The first prescriptive study showed how stakeholder involvement may contribute to the identification of relevant performance measures for the maintenance activities. Stakeholder involvement also contributes to the organizational acceptance of the maintenance strategy. Last, the second prescriptive case study led to the development of a work-process for formulation of maintenance strategies. The work-process was tested and verified in three companies, handling different challenges for their maintenance activities. All three companies intend to use the formulated maintenance strategy as a road map for the development of their production maintenance.
Wall, Karl. "Ledtidsreduktion genom värdeflödesanalys : Analys och förbättring av ett produktionsflöde." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-9555.
Повний текст джерелаWipro Infrastructure Engineering i Östersund, tillverkare av hydraulcylindrar, vill anpassa tillverkningen av två högvolymsprodukter i det manuella produktionsflödet genom resurssnålare tillverkning för att möta det nya kundkravet om en ledtid på 48 timmar mot tidigare ledtid på 10 arbetsdagar.
Produktionen av hydraulcylindrarna Reach och Sideshift kan delas in i en sekvens om fyra processteg; maskinbearbetning av cylinderrör och kolvstång, svetsning, montering och slutligen lackering och packning.
Värdeflödeskartor över det nuvarande tillståndet för hydraulcylindrarna Reach och Sideshift visade att den värdeskapande tiden i processerna stod för 2,1 % och 1,6 % av ledtiden för Reach respektive Sideshift. Genom observationer identifierades slöserier främst i lager och väntan. Aktiviteter som inte tillför värde men som är nödvändiga identifierades främst i materialförsörjningen av tillsatsmaterial till processerna. Arbetsinnehållet och arbetsmängden till respektive process styrs genom produktionsberedning i ett MPS-system. Varje process arbetar individuellt utan hänsyn till behovet i nästa process. Detta medför att produktionsprocesserna upplevs som isolerade öar som trycker fram material genom hela tillverkningen.
Med värdeflödeskartor av nuvarande tillstånd som grund och med Lean-metodik som angreppsätt, skapades värdeflödeskartor som visar på ett önskat framtida tillstånd. Ett flertal förbättringsåtgärder genomfördes i syfte att reducera upptäckta icke-värdeskapande aktiviteter i material- och informationsflödet. Flera produktionsprocesser kopplades samman för att bilda en produktionscell. En supermarket för bearbetade cylinderrör och kolvstänger som stödjer FIFU infördes. Kanbanstyrning av tillsatsmaterial implementerades. En kanban-tavla sattes upp för att förenkla informationsflödet och ett kontrollerat lager av färdiga produkter infördes.
Resultaten av förbättringsåtgärderna visar på en minskning av ledtiden genom hela värdeflödet med 50 % för båda produkterna till 4,1 dagar. Andelen värdeskapande aktiviteter ökade med 43 % och 69 % för Reach respektive Sideshift. Seriestorlekarna minskade med 65 % och tiden från start av order i produktionscellen till färdig produkt tar endast 20 timmar.
Slutsatserna från resultatet visar på att ett resurssnålt, förbrukningsstyrt och sammanlänkat värdeflöde går att uppnå med hjälp av metoder och verktyg inom Lean. Ett väsentligt steg i ledtidsreduktion har uppnåtts och författarens åsikt är att företaget genom fortsatt arbete med Lean kan nå en ledtid på 48 timmar.
Wipro Infrastructure Engineering Östersund, manufacturer of hydraulic cylinders, wants to adapt the production of two high volume products in the manual product line. Through Lean methods, the aim is to reduce the lead time in order to meet new customer requirements of lead times of 48 hours. The currently agreed lead time from order to delivery is ten days.
The production of the hydraulic cylinders Reach and Sideshift can be divided into four subsequent steps; machining the cylinder tube and piston rod, welding, assembling and finally painting and packaging of the final product.
Value stream maps resembling the current state for Reach and Sideshift showed that the ratio between value-adding time and total lead time was a mere 2.1 percent for Reach and 1.6 percent for Sideshift. Through observations waste was identified primarily in inventory and in waiting. Non-value adding but necessary activities were mainly found in activities concerning supply of material to the processes. The work orders are dealt to each process through an MPS-system. Each process works individually without consideration to the needs of connecting processes. This causes each production process to behave like an isolated part pushing rather than pulling material through the production.
By using value stream maps of the current state as a foundation for improvements, and with a Lean approach, value stream maps of a desired future state were drawn. Several measures were taken to improve the processes by reducing non-value adding activities in the material- and information flow. Several production processes were linked by creating a production cell. A supermarket supporting FIFO for machined tubes and rods was introduced. Kanban was implemented for supply of material to the processes. A kanban whiteboard is used to simplify the flow of information and a limited inventory of finished products was installed.
The results of the measures taken for improvements show that the lead time through the value stream was reduced by 50 percent to 4.1 days for both products. The value-adding ratio increased by 43 percent for Reach and 69 percent for Sideshift. Batch sizes were reduced by 65 percent and the time from starting an order in the production cell to finished product now only takes 20 hours.
Conclusions based on the results clearly show that a Lean pull production and connected processes can be achieved by using Lean methods and tools. A significant step in lead time reduction has been achieved and it is the author’s opinion that the company, through continued work with Lean measures, can achieve a lead time of 48 hours.
Widell, Jonas. "Frihängande kylbaffel för Swegon : Freely suspended chilled beam for Swegon." Thesis, Karlstads universitet, Fakulteten för teknik- och naturvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-6599.
Повний текст джерелаHenriksson, Therese. "Ryggsträckare." Thesis, Högskolan på Gotland, Institutionen för humaniora och samhällsvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-391.
Повний текст джерелаJosefsson, Filip. "Biggi förvaring : förvaringsskåp för utomhusbruk." Thesis, Högskolan på Gotland, Institutionen för humaniora och samhällsvetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-1065.
Повний текст джерелаManne Bouveng, VD för Optimel AB hade en idé om ett nytt slags förvaringsskåp som skulle vara anpassat framförallt för radhusägare. Jag kom i kontakt med Manne via en bekant till oss, vi träffades och bestämde oss för att det skulle passa bra som mitt examensarbete. Det som behövde göras var en marknadsundersökning som eventuellt skulle visa på att det fanns ett behov av ett nytt slags förvaringsskåp. I och med detta fanns det underlag för att gå vidare med grundidén. Vi kom fram till en lösning där vi har utvecklat ett förvaringsskåp som påminner om Optimels kända postlåda Rondo. Förvaringsskåpet är en lösning som har anpassats efter vad som oftast skapar oreda i trädgården. Lösningen baseras på en grundkonstruktion med en hängningsanordning inuti, där man kan fästa verktygskrokar, redskapshållare och hyllor. Ändamålet med uppgiften var att utveckla ett nytt slags förvaringsskåp med en upphängningslösning för verktyg och andra objekt. Detta har vi lyckats med och konceptet uppfyller de krav vi satt upp i början av projektet.
Leo, Stefan. "Designkoncept av ”toycam” : Framtagning av koncept för analog kamera." Thesis, Högskolan på Gotland, Institutionen för humaniora och samhällsvetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-930.
Повний текст джерелаLarsson, Emil. "Diagnosis and Supervision of Industrial Gas Turbines." Licentiate thesis, Linköpings universitet, Fordonssystem, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-75985.
Повний текст джерелаNtalianis, Ioannis. "Industrial investments' transformation and sustainability in Sweden." Thesis, KTH, Industriell Marknadsföring och Entreprenörskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-230948.
Повний текст джерелаLind, Markus, and Viktor Sjöblom. "Industrial Sheet Metal Forming Simulation with Elastic Dies." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16782.
Повний текст джерелаReduced Lead Time through Advanced Die Structure Analysis - Vinnova
Berglund, Åsa. "Responses to reduced industrial metal emissions : An ecotoxicological study on Pied Flycatcher (Ficedula hypoleuca, Aves)." Doctoral thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-33767.
Повний текст джерелаMetaller är grundämnen som inte kan bildas eller förstöras av människan. De förekommer i mineraler i berggrunden och finns överallt på jorden. Människans användning av metaller har dock medfört att de återfinns i högre halter i miljön än de annars skulle gjort. Trots att metallerna kan spridas och transporteras långa sträckor med luftmassorna, är det främst kring källorna, såsom metallindustrier, man kan hitta metaller i tillräckligt höga halter för att orsaka skada på växter och djur. I denna avhandling presenteras undersökningar av hur svartvit flugsnappare (Ficedula hypoleuca) påverkas kring två metallindustrier i norra Sverige. Det ena är en numera nedlagd blygruva med anrikningsverk i Laisvall, där vi studerade populationer av svartvit flugsnappare före och efter att industrin stängdes. Det andra är smältverket Rönnskärsverken, utanför Skelleftehamn, som varit i drift sedan 1930-talet. I föroreningsgradienten från smältverket studerades effekter av 20 års kraftigt minskade metallutsläpp till luften som följd av förbättrade reningstekniker. Resultaten kring industrierna visar att fåglarna svarade olika på de minskade metallutsläppen. Kring blygruvan minskade halterna av bly i flugsnapparungar med samma takt som nedfallen (mätt i mossa) och bytesdjuren (myror). Däremot, kring smältverket, var fåglarna fortfarande exponerade för höga halter av de giftiga ämnena arsenik, kadmium, kvicksilver och bly, på i princip samma nivåer som 20 år tidigare, trots att utsläppen minskat med 93 – 98%. Orsaken till detta tros vara skillnader på föroreningsgraden i markens översta lager, mårskiktet. Vi kunde visa att flugsnapparna kring smältverket främst fick i sig metallerna från marken, som efter flera årtionden med utsläpp från industrin innehöll mycket höga metallhalter. Detta kan förklara att fåglarna trots att utsläppen var låga, fortfarande var utsatta för stor metallexponering. Det snabba svaret på minskad metallspridning (bly och zink) som flugsnapparna vid blygruvan visade, antar vi berodde på att mindre mäng metaller fanns i marken. Trots minskningen var metallhalterna i fåglarna vid gruvområdet fortfarande tillräckligt höga för att, liksom vid smältverket, påverka fåglarnas hälsa. De uppvisade bl.a. låga blodvärden och tecken på oxidativ stress. Vidare var ungdödligheten förhöjd, vilket ledde till lägre häckningsframgång. Slutsatsen är att markens innehåll av metaller har stor betydelse för återhämtningsförloppet för svartvit flugsnappare efter minskat metallnedfall, och att en relativt snabb återhämtning kan förväntas i områden med något lägre metallhalter i mårskiktet, medan återhämtning i områden där marken är kraftigt förorenad inte kan förväntas förrän efter flera årtionden, även om nedfallet upphört nästan helt.
Thiabgoh, Ongard. "Novel Magneto-LC resonance Sensors for Industrial and Bioengineering Applications." Scholar Commons, 2018. https://scholarcommons.usf.edu/etd/7650.
Повний текст джерелаRavula, Vamsi Krishna. "Study on fungal pellet morphology and its industrial applications." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-13497.
Повний текст джерелаYi, Junesuh Kim Moon K. "The impact of the short-short rule repeal on timing ability and other characteristics of mutual funds." Related Electronic Resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2003. http://wwwlib.umi.com/cr/syr/main.
Повний текст джерелаKarahasanovic, Ermin, and Henrik Lönn. "Selecting the best strategy to improve quality, keeping in view the cost and other aspects." Thesis, Växjö University, School of Technology and Design, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-1543.
Повний текст джерелаThe purpose with the thesis was to create a general model that can help companies to take the best decision when it comes
to improving the quality of an object. The model was created to solve the problem formulation; How to find the best way to
improve the quality of an object, focusing primarily on the relationship between cost and quality but also take other
important aspects into consideration. Before the model was created a literature study was performed in ELIN without any
useable result. After the literature study was performed quality models like Quality Function Deployment (QFD) and Total
Quality Management (TQM) were studied. The study of QFD and TQM showed that they are somewhat complicated and
often consider the entire organisation. Simple Quality Model is a smaller model and focuses only at one object at a time.
TQM and QFD have however been good inspiration for the creation of SQM. The model was tested in a real-time situation
at Saab Communication. Together with Saab Communication we decided to apply SQM to the Swedish defence telenetwork
(FTN). In FTN the model was tested at the basic connections. SQM generated 7 different alternatives to improve
the dependability in a basic connection. After the application of SQM it showed that alternative 7 was the best alternative.
Alternative 7 was to decrease the switch over time. The switch over is today not handled by a special employee and is
instead shared among several workers. By employing two new employees there is a possibility to lower the switch over time
with 50% down from today’s 60 minutes to 30. To implement this alternative would bring a cost of 5 374 034 SEK and a
quality increase of 0,1398955% for the basic connections in the Swedish defence tele-network.
Syrén, Andreas, Ivan Crnoja, and Afrem Malek Kass. "Kvalitetssäkring." Thesis, Jönköping University, JTH, Mechanical Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-1266.
Повний текст джерелаThis thesis has been made in cooperation with Forsheda Stålverktyg AB which develops and manufactures injection moulds and diecasting tools. The main concern has been their Trading-system which provides them with considerable amount of quality lost function.
Focus has to however be put on the analysis of the Trading-system due to the fact that this has previously meant various quality issues for the company.
This thesis treats quality assurance of the Trading-system, identification of the problems in the process and improvements of these problems.
Quality assurance is carried out when a company detects that their quality based costs become too high. Quality based cost are” the costs that would disappear if a company's products and its different operational processes were absolute” (Sörqvist, 2001 p.30, free translation from Swedish). High quality based costs often result in increased quality problems, which can lead to substantial economic loss for the company.
This work has resulted in a thorough review of the Trading-system whereupon problems have been identified. In order to assure the quality process and lower the quality based costs, we have developed a control system. This, in order to avoid earlier made mistakes and assure that further problems with the system don’t occur.
The developed system will result in more responsibilities for the customers, especially when reviewing the tool drawing and prototype. Thereby the errors and the quality based costs will decrease.
Reuter, M. A. "The fundamental limits of recycling : from minerals processing to computer aided design of automobiles and other consumer goods /." Link to the online version, 2006. http://hdl.handle.net/10019/1394.
Повний текст джерелаMarin, Christoffer, and ERIK TRETOW. "Synergy Valuation in Industrial Software Acquisitions." Thesis, KTH, Industriell Management, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-239394.
Повний текст джерелаAtt genomföra förvärv är en vanligt förekommande företagsstrategi och affärer motiveras ofta av synergier, konceptet att värdet på det sammanslagna företaget är större än värdet på summan av de enskilda företagen. Dock är det ofta svårt att realisera värdet av synergierna i praktiken och det krävs därför en grundlig utvärdering av potentiella synergieffekter innan förvärvet för att öka sannolikheten för ett lyckat förvärv. I denna uppsats analyserar vi de strategiska motiven, synergier samt värderingsmetoder som används vid förvärv av företag inom industriell mjukvara. Genom flertal casestudier bestående av empiriskt material från intervjuer, värderingsmodeller och transaktionsrelaterade dokument har vi studerat fem till¨aggsförvärv, tre av vilka genomfördes av dotterbolag till Marrow och de resterande två av ett företag inom industriell mjukvara under ägarskap av private equity. De huvudsakliga slutsatserna från studien är: • Den främsta strategiska rationalen och källa till synergi är intäktsförbättringar genom förvärv av teknologi och utnyttjande av etablerade säljkanaler för att korsförsälja samt accelerera marknadstillgången för det förvärade företagets produkter • En framstående kostnadssynergi är konsolidering och/eller omförhandling av kontrakt med tredjepartsleverantörer vars produkter används för att utveckla industriell mjukvara • Finansiella synergier är varken explicit estimerade eller värderade • Värdering utförs med både DCF och multipelmetod där graden av sofistikering i de underliggande estimaten varierar, från att granulärt estimera varje post till överslagsestimat baserade på erfarenhet och intuition Slutligen, resultaten indikerar att synergier kan i större utsträckning vara en funktion av den strategiska rationalen snarare än en funktion av industri. Emellertid ter det sig att förvärv av företag inom industriell mjukvara motiveras av samma strategiska rational, nämligen intäktsförbättringar genom utnyttjande av säljkanaler och korsföräljning. Därmed kan de korresponderande synergierna vara komparativt mer frekvent förekommande i denna industri.
Lilliesköld, Joakim. "Managing Complex Industrial Projects : A comparison between holistic models." Doctoral thesis, KTH, Industriella informations- och styrsystem, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3860.
Повний текст джерелаQC 20100519
Wigren, Anna. "A Study on Condition-Based Maintenance with Applications to Industrial Vehicles." Thesis, Uppsala universitet, Avdelningen för systemteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-321528.
Повний текст джерелаConley, Clark Logan. "Cliqued holes and other graphic structures for the node packing polytope." Thesis, Manhattan, Kan. : Kansas State University, 2009. http://hdl.handle.net/2097/2300.
Повний текст джерелаDerhamy, Hasan. "Towards Interoperable Industrial Internet of Things : An On-Demand Multi-Protocol Translator Service." Licentiate thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-138.
Повний текст джерелаJosefsson, Malin. "Vikbar säng." Thesis, Gotland University, School of the Humanities and Social Science, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-569.
Повний текст джерелаMitt uppdrag har bestått av att undersöka möjligheterna till att utforma en ny generations gästsäng på uppdrag av Stram AB. Uppdraget kom i första hand att handla om att göra sängen mer attraktiv för kunden samt undersöka möjligheterna till att göra sängen mindre i frakten, eftersom detta skulle kunna innebära en ökad vinst för Stram AB. Den huvudsakliga faktorn till uppdragets uppkomst var att sängen sett likadan ut i 50år och man vill nu undersöka om det är möjligt att förnya den. I det här arbetet ingår förstudier i form av analyser och undersökningar, idégenerering och då framförallt mot dem koncept som kom att vidareutvecklas. Här kommer även diskussioner kring den färdiga produkten finnas. Resultatet av förstudierna I form av analyser och undersökningar kom att resultera i en miljövänligare säng. Sängen kommer både att vara mer miljösmart samt också uttrycka detta för att locka kunden. Resultatet kom också att leda till ett alternativ till liggunderlaget.
My job has consisted of examining the possibilities of designing a new generation of guest beds commissioned by Stram AB. The project was primarily about making the bed more attractive to customers and explore opportunities to make the bed smaller in delivery, as this could result in increased profits for Stram AB. The main factor to the emergence of the project was that the bed has looked the same in 50 years and now we want to examine whether it is possible to renew it. This work included studies in terms of analysis and research, idea generation and particularly to those concepts that came to be developed. There will also be discussions about the finished product available. The results of preliminary studies in terms of analysis and studies that did result in a bed that is better for the environment. The bed will not only be more environmentally smart but also express this in order to attract customers. The result also led to a solution instead of steel feathers.
Eriksson, Linus. "Nya tidens torgstånd : ett examensarbete för Stora torget i Visby." Thesis, Gotland University, School of the Humanities and Social Science, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-651.
Повний текст джерелаGotlands kommun ville skapa ett mer sammanhållet och ordnart intryck av Visbys torghandel, i första hand för Stora torget. Uppdraget gick ut på att formge nya torgstånd som skulle ge ett lugnt och enhetligt intryck. I uppdraget ingick även att se över planlösningen och komma med förslag på lämplig möblering inom det torghandeln. Den sista delen av uppdraget var att se över tillverkningsmöjligheter och hitta lämpliga producenter, gärna med förankring till Gotland. Jag har samarbetat tillsammans med en intressegrupp för att på ett enkelt sätt kunna få feedback under processens gång. Det har varit ett omfattande projekt med många olika intressenter med varierande åsikter, men jag tror mig ha skapat ett torgstånd som uppfyller de flesta önskemål och krav som projektet innefattar.
Gotland Municipality wanted to create a more cohesive and arranged impression of Visby´s market trading, primarily in the town square. The assignment was to design new market stalls which would provide a calm and uniform appearance. The commission also included to review the layout and make suggestions for suitable layouts in the area for the market trading on Market Square. The last part of the mission was to look at manufacturing opportunities and find appropriate producers. I have worked together with an reference group in order to get feedback during the process.This project with many different stakeholders with different opinions, but I believe I have created market stalls that meet most needs and requirements that the project involves.
Ideskog, Aron. "Träningsredskap." Thesis, Gotland University, School of the Humanities and Social Science, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hgo:diva-658.
Повний текст джерелаThere are many risk factors involved with a sedentary lifestyle. Deep vein thrombosis (blood clot), circulatory problems and contractures are just a selection of problems you can get by too little exercise. For people who are immobilized because of illness, it can be difficult to get enough exercise and movement to avoid similar complications. Because of most medical supplies on the market today are not optimal for use at home, I have chosen to develop a training device for the lower limbs, adapted for use in a bed, both in hospitals and at home. It is important that the devise can be used in any bed, regardless of headboards. The device must be compact and easy to use. The problem was solved by creating a collapsible device with which to train throughout the lower limbs, including handles for stabilizing the torso and straps with wich you can fixate the devise to the bed.
Det finns många riskfaktorer inblandade med en stillasittande livsstil. Djupventrombos (blodpropp), cirkulationsbesvär och kontrakturer är bara ett urval av besvär man kan få av för lite rörelse. För personer som får nedsatt rörelseförmåga på grund av sjukdom kan det vara svårt att få tillräckligt med motion och rörelse för att undvika dessa, och liknande komplikationer. Då de redskap som finns på marknaden idag inte är optimala för hemmabruk har jag valt att utveckla ett träningsredskap för de nedre extremiteterna, anpassat för att användas i en säng, både på sjukhus och hemma. Det är viktigt att redskapet går att använda i alla sängar. Redskapet skall vara kompakt och lätt att använda. Problemet löstes med ett hopfällbart redskap som med vilket man kan träna hela underkroppen, handtag för stabilisering av bålen och spännband förfixering vid sängen.
HUANG, JU-HAN. "Analysis of Telecommunication Markets of India, Singapore and Thailandand and Research Their Global Competitiveness." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-39001.
Повний текст джерелаChurchward, Patience 1981. "Conveying Portland's History in Modern Use: The Role of Industrial and Cultural Heritage in Adaptive Reuse." Thesis, University of Oregon, 2010. http://hdl.handle.net/1794/10624.
Повний текст джерелаThis thesis examines the role of cultural heritage in adaptively reused historic industrial buildings in Portland, Oregon. While it has been argued that adaptive reuse contributes to the ecological and economic initiatives of sustainability, this research explores how adapting historic industrial buildings for modern reuse can also be socially and culturally sustainable for communities. Industrial buildings provide physical evidence of a rich cultural and industrial past and there are opportunities to share this heritage with a building's new users and/or the surrounding community. Case studies include selectively chosen National Register nominated buildings that meet specific criteria, share a common regulatory framework, and provide insightful information regarding the relationship between history and new use. Strengths and challenges of conveying industrial heritage in modern use as well as opportunities for developers of historic properties to highlight and improve upon this process are identified.
Committee in Charge: Robert Z. Melnick, FASLA, Chair; Doug Blandy, Ph.D