Добірка наукової літератури з теми "Orthotropic Elastic Moduli"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Orthotropic Elastic Moduli".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Orthotropic Elastic Moduli"
SOFIYEV, A. H., E. SCHNACK, V. C. HACIYEV, and N. KURUOGLU. "EFFECT OF THE TWO-PARAMETER ELASTIC FOUNDATION ON THE CRITICAL PARAMETERS OF NONHOMOGENEOUS ORTHOTROPIC SHELLS." International Journal of Structural Stability and Dynamics 12, no. 05 (October 2012): 1250041. http://dx.doi.org/10.1142/s0219455412500411.
Повний текст джерелаDiaco, Marina. "On Torsion of Functionally Graded Elastic Beams." Modelling and Simulation in Engineering 2016 (2016): 1–7. http://dx.doi.org/10.1155/2016/8464205.
Повний текст джерелаTurner, C. H., and S. C. Cowin. "Errors Induced by Off-Axis Measurement of the Elastic Properties of Bone." Journal of Biomechanical Engineering 110, no. 3 (August 1, 1988): 213–15. http://dx.doi.org/10.1115/1.3108433.
Повний текст джерелаOzyhar, Tomasz, Stefan Hering, and Peter Niemz. "Moisture-dependent orthotropic tension-compression asymmetry of wood." Holzforschung 67, no. 4 (May 1, 2013): 395–404. http://dx.doi.org/10.1515/hf-2012-0089.
Повний текст джерелаVorobyev, Alexey, Olivier Arnould, Didier Laux, Roberto Longo, Nico P. van Dijk, and E. Kristofer Gamstedt. "Characterisation of cubic oak specimens from the Vasa ship and recent wood by means of quasi-static loading and resonance ultrasound spectroscopy (RUS)." Holzforschung 70, no. 5 (May 1, 2016): 457–65. http://dx.doi.org/10.1515/hf-2015-0073.
Повний текст джерелаSubhani, Mahbube, Jian Chun Li, Hauke Gravenkamp, and Bijan Samali. "Effect of Elastic Modulus and Poisson's Ratio on Guided Wave Dispersion Using Transversely Isotropic Material Modelling." Advanced Materials Research 778 (September 2013): 303–11. http://dx.doi.org/10.4028/www.scientific.net/amr.778.303.
Повний текст джерелаAdibaskoro, Tito, Michalina Makowska, Aleksi Rinta-Paavola, Stefania Fortino, and Simo Hostikka. "Elastic Modulus, Thermal Expansion, and Pyrolysis Shrinkage of Norway Spruce Under High Temperature." Fire Technology 57, no. 5 (April 30, 2021): 2451–90. http://dx.doi.org/10.1007/s10694-021-01123-z.
Повний текст джерелаTokovyy, Yuriy V., Anatoliy V. Yasinskyy, Sebastian Lubowicki, and Dariusz M. Perkowski. "Elastic and Thermoelastic Responses of Orthotropic Half-Planes." Materials 15, no. 1 (December 31, 2021): 297. http://dx.doi.org/10.3390/ma15010297.
Повний текст джерелаZhao, Aihong, and Jilin Yu. "The overall elastic moduli of orthotropic composite and description of orthotropic damage of materials." International Journal of Solids and Structures 37, no. 45 (November 2000): 6755–71. http://dx.doi.org/10.1016/s0020-7683(99)00226-7.
Повний текст джерелаGotkhindi, Tejas P., and K. R. Y. Simha. "Transverse orthotropic elastic moduli of bundled coated thin elliptical tubes." Composite Structures 118 (December 2014): 178–99. http://dx.doi.org/10.1016/j.compstruct.2014.07.030.
Повний текст джерелаДисертації з теми "Orthotropic Elastic Moduli"
Moussu, Florent. "Développement d'une méthode de détermination des constantes élastiques d'un matériau orthotrope." Vandoeuvre-les-Nancy, INPL, 1995. http://www.theses.fr/1995INPL033N.
Повний текст джерелаGrédé, Audrey. "Modélisation des chocs d’origine pyrotechnique dans les structures d’Ariane5 : développement de modèles de propagation et d'outils de modélisation." Thesis, Châtenay-Malabry, Ecole centrale de Paris, 2009. http://www.theses.fr/2009ECAP0006/document.
Повний текст джерелаReliable and efficient numerical models for the pyrotechnic shock wave propagation in structures of the Ariane5 launcher are necessary for a good understanding and a predictive analysis of the payload vibration environment. More precisely, the correct modeling of the dynamic behaviour of the honeycomb sandwich shells, the main material composing the payload adaptor, is essential to control the vibration environment of the payload and the embarked electronic equipments and so to prevent them from damages caused by the shock wave propagation. The topic is obviously a multi-scale problem from both temporal and spatial points of view : short time intervals imposed by supersonic moving loads vs. large total time interval that the slowest waves need to travel throughout the adaptor ; very short wavelengths of high frequency waves, and very small size of the honeycomb cells vs. large structure dimensions. To take into account all involved space-time scales in a reliable and efficient way, the herein study is based both on the analytical and numerical qualification of the classical homogenized models of honeycomb sandwich shells for the frequency range introduced by the pyrotechnic shock wave, and on a dynamic solver based on the well-known space-time discontinuous Galerkin method, allowing the use of adaptive remeshes for the wave propagation. The classical Mindlin-Reissner’s kinematics of thick plates being inefficient to correctly represent the dynamic out-of-plane behaviour of the honeycomb sandwich plates, two kinds of its enrichment are considered : One-layered models based on an enrichment of the kinematics by adding degrees of freedom in the thickness, and multi-layered models composed of a superposition of three plates with separated material homogenisations. It has been shown theoretically and numerically that, both types of enrichment allow more precise descriptions of flexure and transverse shear modes in the high frequency range. However, the multi-layered models give much more promising results, as the important role played by the honeycomb core for the transverse shear behaviour of the whole sandwich is not “smeared” in a one-layered homogenized model. All the numerical studies were conducted with a finite element code which uses a dynamic solverbased on the time discontinuous space-time Galerkin method. The built-in numerical damping of this solver can interfere with a physical damping potentially introduced by the numerical model and results in a global damping totally unexpected. This interaction has been analysed and underlined in this work thanks to the introduction of the Rayleigh damping in the shock wave propagation models. Theoretical and numerical tools and propagating models thus developed have been validated on several academic and industrial structures. Comparison with experimental data on large size industrial structures, especially a real size payload adaptor, is performed and emphasizes the coherence of our approach and the reliability and the efficiency of the proposed propagating models
Burela, Ramesh Gupta. "Asymptotically Correct Dimensional Reduction of Nonlinear Material Models." Thesis, 2011. http://etd.iisc.ernet.in/2005/3909.
Повний текст джерелаЧастини книг з теми "Orthotropic Elastic Moduli"
Acosta Flores, Mario, Eusebio Jiménez López, and Marta Lilia Eraña Díaz. "Obtaining of a Constitutive Models of Laminate Composite Materials." In Elasticity of Materials [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.100607.
Повний текст джерелаS. Kulkarni, Mrudula. "Mechanical Properties and Elasticity Model for Bovine Hard Tissue." In Bovine Science [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98410.
Повний текст джерелаТези доповідей конференцій з теми "Orthotropic Elastic Moduli"
Lipton, Robert P., and James Northrup. "Bounds on shear moduli for orthotropic elastic composites." In 1993 North American Conference on Smart Structures and Materials, edited by H. Thomas Banks. SPIE, 1993. http://dx.doi.org/10.1117/12.148411.
Повний текст джерелаBehfar, K., R. Naghdabadi, A. Vafai, and H. E. Estekanchi. "Nanoscale Vibrational Analysis of an Embedded Multi-Layered Graphene Sheet." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58629.
Повний текст джерелаZhang, Yiqing, and Lifeng Wang. "Vibration of Rectangular Single-Layered Black Phosphorus." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71056.
Повний текст джерелаDiCarlo, Anthony A., and John A. Gallagher. "An Adaptive Structure Topology Optimization Approach Applied to Vertebral Bone Architecture." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-8131.
Повний текст джерелаSomireddy, Madhukar, and Aleksander Czekanski. "Characterization of Material Behavior of the Fused Deposition Modeling Processed Parts." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2949.
Повний текст джерелаLiu, Yu Cheng, and Jin Huang Huang. "Modes of Wave Propagation and Dispersion Relations in Inclusion Reinforced Composite Plates." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24246.
Повний текст джерелаQuek, Shu Ching, Anthony M. Waas, Venkatesh Agaram, and Khaled Shahwan. "Compressive Instabilities in Braided Textile Composites." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/ad-25306.
Повний текст джерелаJu, J. W., and K. Yanase. "Elastoplastic Micromechanical Damage Mechanics for Composites With Progressive Partial Fiber Debonding and Thermal Residual Stress." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42744.
Повний текст джерелаShen, Chuanchuan, Li Ma, and Jinyang Zheng. "A Novel Assessment Method for Wrinkle Defects in Composites." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21177.
Повний текст джерелаYang, H. D., and L. Y. Fu. "Acoustoelastic Simulation of Wave Propagation in Different Prestressed Media." In International Geomechanics Symposium. ARMA, 2022. http://dx.doi.org/10.56952/igs-2022-005.
Повний текст джерелаЗвіти організацій з теми "Orthotropic Elastic Moduli"
English, Shawn Allen, and Arthur A. Brown. A 3D Orthotropic Elastic Continuum Damage Material Model. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1113865.
Повний текст джерелаEnglish, Shawn Allen. A 3D Orthotropic Strain-Rate Dependent Elastic Damage Material Model. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1156935.
Повний текст джерела