Дисертації з теми "Orthopedic implants – Materials"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-30 дисертацій для дослідження на тему "Orthopedic implants – Materials".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Tirunagari, Prashanthi. "Nanomechanical characterization of femoral head materials." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/5906.
Повний текст джерелаThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on August 30, 1981) Includes bibliographical references.
Bell, Bryan Frederick Jr. "Functionally graded, multilayer diamondlike carbon-hydroxyapatite nanocomposite coatings for orthopedic implants." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7962.
Повний текст джерелаLee, Goonhee. "Selective laser sintering of calcium phosphate materials for orthopedic implants /." Digital version accessible at:, 1997. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаBell, Bryan Frederick. "Functionally graded, multilayer diamondlike carbon-hydroxyapatite nanocomposite coatings for orthopedic implants." Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-06072004-131058/unrestricted/bell%5Fbryan%5Ff%5F200405%5Fms.pdf.
Повний текст джерелаWong, Kai-lun, and 黄棨麟. "Strontium-substituted hydroxyapatite reinforced polyetheretherketone biomaterials in orthopaedic implants." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42182505.
Повний текст джерелаWong, Kai-lun. "Strontium-substituted hydroxyapatite reinforced polyetheretherketone biomaterials in orthopaedic implants." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B42182505.
Повний текст джерелаFang, Liming. "Processing of HA/UHMWPE for orthopaedic applications /." View abstract or full-text, 2003. http://library.ust.hk/cgi/db/thesis.pl?MECH%202003%20FANG.
Повний текст джерелаIncludes bibliographical references (leaves 128-138). Also available in electronic version. Access restricted to campus users.
Flanigan, Kyle Yusef. "Synthesis of HAP nano rods and processing of nano-size ceramic reinforced poly (L) lactic acid composites /." Thesis, Connect to this title online; UW restricted, 2000. http://hdl.handle.net/1773/10616.
Повний текст джерелаGarrido, Luiz Fernando. "Avaliação do desempenho de implantes de polietileno e de fosfato tricalcio, recobertos por hidrogel, em defeitos osteocondrais no joelho de cães." [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/313400.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Ciencias Medicas
Made available in DSpace on 2018-08-09T02:25:23Z (GMT). No. of bitstreams: 1 Garrido_LuizFernando_M.pdf: 3331524 bytes, checksum: 50f44c5fff048c0f9e4c220b4f7e52f4 (MD5) Previous issue date: 2007
Resumo: Este estudo teve como objetivo avaliar o desempenho in vivo, de implantes cilíndricos com altura e diâmetro de 5mm formados por cerâmica ß-tricálcio fosfato (ß-TCP) ou polietileno de ultra-alto peso molecular (PEUAPM) todos recobertos com hidrogel de poli (2-hidroxi etil metacrilato) - poli(metacrilato de metila-co-ácido acrílico) (75:25) (pHEMA/poli (MMA-co-AA)) para preencher defeitos osteocondrais nos joelhos direito e esquerdo de cães. Foram operados treze cães machos com peso entre 15 e 25 kg fornecidos pelo Canil do Centro Multi Institucional de Bioterismo da Unicamp, sem raça definida, em bom estado de nutrição, vacinados após período prévio de quarentena. Cinco cães foram utilizados como controle e oito foram seguidos por nove meses após a colocação dos implantes. Os implantes de cerâmica foram colocados no sulco troclear do joelho direito e os de polietileno no joelho esquerdo. Foram realizadas análises da superfície do implante macroscópica (in vivo e in vitro), mecânica e microscópica, com a finalidade de avaliar a formação de tecido sobre o implante, o seu desgaste, o se desempenho viscoelástico e a interface formada entre o implante e o tecido ósseo. Os implantes de cerâmica apresentaram desempenho inferior ao polimérico, em todos os critérios avaliados. Embora não tenha havido desgaste significativo na superfície do hidrogel os dois implantes estudados produziram abrasão na superfície da patela
Abstract: This study had the purpose of evaluating ¿in vivo¿ the performance of ß-TCP ceramic or extreme high molecular weight polyethylene cylindrical implants, with height and diameter of 5mm, all covered with poly(2-HEMA) ¿ poly(methyl methacrilate-co-acrilic acid) hydro gel (polyHEMA/poly(MMA-co-AA) (75:25) in order to fill in bone defects in both the right and left knees of dogs. Thirteen male dogs weighting between 15 and 25kg, supplied by UNICAMP¿s Centro Multi Institucional de Bioterismo, were operated. All the dogs were well nourished, vaccinated and the operation took place after a previous quarantine period. Five dogs were used as control and eight were followed for nine months after putting the implants. The ceramic implants were placed in the right knees and the polyethylene ones in the left knees. Macroscopic, mechanic and microscopic analyses of the implant surface, (both in vivo and in vitro) were performed, in order to evaluate the tissue formation on the implant, the wearing off of the implant, the viscoelastic performance and the interface between the implant and the bone tissue. The ceramic implants presented an inferior performance when compared to the polymeric ones, in all of the evaluated aspects. Although there was no significant degradation on the hydro gel surface, both studied implants produced erosion on the kneecap surface
Mestrado
Cirurgia
Mestre em Cirurgia
Chang, Hsuan-chen. "Porous bioceramic and biomaterial for bone implants /." Digital version accessible at:, 2000. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаWong, Hoi-man, and 黃凱文. "The development of magnesium-based materials for orthopaedic applications." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2011. http://hub.hku.hk/bib/B47869549.
Повний текст джерелаpublished_or_final_version
Orthopaedics and Traumatology
Doctoral
Doctor of Philosophy
Yeung, Che-yan, and 楊芷茵. "Antibacterial properties and biocompatibility of novel peptide incorporated titanium alloy biomaterials for orthopaedic implants." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hdl.handle.net/10722/197133.
Повний текст джерелаLeung, Kit-ying. "Anti-bacteria plasma-treated metallic surface for orthopaedics use." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B41633994.
Повний текст джерелаLin, Hsin-Yi. "Short term observations of in vitro biocorrosion of two commonly used implant alloys." Diss., Mississippi State : Mississippi State University, 2002. http://library.msstate.edu/etd/show.asp?etd=etd-08202002-105908.
Повний текст джерелаBedi, Rajwant Singh. "Anticorrosion and biocompatible Zeolite based coatings for tissue regeneration on metallic bioimplants." Diss., UC access only, 2009. http://proquest.umi.com/pqdweb?index=9&did=1800212961&SrchMode=2&sid=3&Fmt=2&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1270057484&clientId=48051.
Повний текст джерелаLeung, Kit-ying, and 梁潔瑩. "Anti-bacteria plasma-treated metallic surface for orthopaedics use." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B41633994.
Повний текст джерелаLui, So-ching, and 雷素青. "Surface bioactivity enhancement of polyetheretherketone (PEEK) by plasma immersion ion implantation." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B43572340.
Повний текст джерелаChong, Yu-wah, and 莊瑜華. "In vitro and in vivo study of plasma immersion ion implantation (PIII)treated polyetheretherketone (PEEK)." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hub.hku.hk/bib/B4985883X.
Повний текст джерелаpublished_or_final_version
Orthopaedics and Traumatology
Master
Master of Philosophy
Lui, So-ching. "Surface bioactivity enhancement of polyetheretherketone (PEEK) by plasma immersion ion implantation." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B43572340.
Повний текст джерелаMedhekar, Vinay Shantaram. "Modeling and simulation of oxidative degradation of Ultra-High Molecular Weight Polyethylene (UHMWPE)." Link to electronic thesis, 2001. http://www.wpi.edu/Pubs/ETD/Available/etd-0828101-135959.
Повний текст джерелаReyes, Catherine Diane. "Collagen- and Fibronectin-Mimetic Integrin-Specific Surfaces That Promote Osseointegration." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/11599.
Повний текст джерелаKwan, Millie. "Bioprocessing of nacreous coatings on orthopedic implant materials." Thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/39884.
Повний текст джерелаWong, Hoi-man. "Surface modification of biodegradable metallic material." Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B41290689.
Повний текст джерелаWong, Hoi-man, and 黃凱文. "Surface modification of biodegradable metallic material." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B41290689.
Повний текст джерелаMAEDA, NANCY T. "Avaliação da neoformação óssea em tíbia de coelhos utilizando cúpula de hidroxiapatita associada a diferentes biomateriais." reponame:Repositório Institucional do IPEN, 2013. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10542.
Повний текст джерелаMade available in DSpace on 2014-10-09T14:07:15Z (GMT). No. of bitstreams: 0
Dissertação (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Reifenrath, Janin [Verfasser]. "In vivo evaluation of degradable magnesium alloys as orthopedic implant material in suitable animal models / Janin Reifenrath." Hannover : Bibliothek der Tierärztlichen Hochschule Hannover, 2015. http://d-nb.info/108052536X/34.
Повний текст джерелаHávová, Mariana. "Kostní implantáty na bázi železa." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-254467.
Повний текст джерелаSequeira, Sara Raquel Marques. "Development of zirconia composites for orthopedic." Master's thesis, Universidade de Aveiro, 2015. http://hdl.handle.net/10773/21527.
Повний текст джерелаZircónia e alumina são biocerâmicos bastante conhecidos, e são usados principalmente em aplicações ortopédicas. Estes materiais têm sido aplicados em implantes de anca e joelho graças à reduzida taxa de desgaste e à excelente biocompatibilidade que apresentam. No entanto, estes cerâmicos apresentam também algumas limitações: a fragilidade da alumina ao impacto e a sensibilidade da zircónia ao envelhecimento. Devido a estas limitações, o objectivo passou por desenvolver implantes mais resistentes e com uma resposta inflamatória menos intensa. Surgiram, então, estudos de compósitos de zircónia e alumina. Neste estudo, foram desenvolvidas três diferentes composições de Alumina reforçada com Zircónia (ZTA) com 80 wt% a 90 wt% de alumina, e três composições de Zircónia reforçada com Alumina (ATZ) com 80 wt% a 90 wt% de zircónia. Foram usados dois tipos diferentes de zircónia estabilizada: zircónia estabilizada com 3 mol% de yttria (3YSZ) que foi usada nos compósitos ATZ, e zircónia estabilizada com 2 mol% de yttria (2YSZ) aplicada nos compósitos ZTA. A composição ATZ com o melhor conjunto de propriedades foi também testada com a zircónia 2YSZ, de forma a produzir um compósito com melhores propriedades mecânicas e uma resistência à degradação semelhante à apresentada pelo compósito ATZ, com a zircónia 3YSZ. Foram seleccionados dois aditivos, óxido de lântanio e pentóxido de tântalo, que foram depois adicionados aos compósitos ATZ e ZTA com o melhor conjunto de propriedades (composição 80:20), com o objectivo de melhorar a resistência ao envelhecimento e as propriedades mecânicas dos materiais produzidos. Após uma etapa de moagem, os pós compósitos foram obtidos por atomização, a partir de suspensões estabilizadas, com uma distribuição de tamanho de partícula nanométrica controlada. Estes pós foram caracterizados através de várias técnicas tais como microscopia electrónica de varrimento, difracção de raios-X, fluorescência de raios-X, densidade real, e área superficial específica. De forma a aumentar a densidade dos corpos em verde, foram efectuadas duas diferentes prensagens, prensagem uniaxial e prensagem isostática a frio (CIP). Foram obtidos cerâmicos com uma elevada densidade (com densidade relativa entre 97% e 99%) a uma baixa temperatura de sinterização (1400ºC). O tamanho de grão das amostras sinterizadas foi observado por SEM e, de forma a verificar as fases cristalográficas presentes, foi realizada difracção de raios-X. Em todos os compósitos foi obtida uma microestrutura dispersa, com um tamanho de grão nanométrico (abaixo dos 500 nm). Este conjunto de etapas de produção aplicado levou à obtenção de compósitos com propriedades mecânicas melhoradas. Foram estudadas a dureza de Vickers, a tenacidade à fratura e resistência à flexão das amostras sinterizadas. Os compósitos ATZ atingiram os melhores valores de tenacidade à fractura e resistência à flexão (acima de 5 MPa.m1/2 e 1394 MPa respetivamente), enquanto os compósitos ZTA apresentaram os melhores valores de dureza (acima de 1846 HV). Como era esperado, o compósito ATZ com zircónia 2YSZ apresentou melhores propriedades mecânicas, tendo sido obtidos 7.94 MPa.m1/2 de tenacidade à fratura e 1498 MPa para a resistência à flexão. A aplicação dos dopantes nos compósitos ZTA e ATZ induziram alterações nas suas propriedades. A adição de Ta2O5 melhorou, com sucesso, as propriedades mecânicas dos dois tipos de compósitos. Foi verificado um aumento dos valores de dureza, tenacidade à fratura e resistência à flexão em relação às amostras sem dopantes. A adição de La2O3 não levou a melhorias nas propriedades mecânicas mas, no entanto, também não teve um efeito prejudicial, o que levou à sua preservação. Foram realizados testes de envelhecimento de acordo com a norma ISO13356 (2008) em todos os compósitos produzidos. A quantidade de zircónia monoclínica, indicador de degradação, foi determinada por difracção de raios-X após 5,12,24,48 e 96 horas de testes de envelhecimento. Foi determinado que os compósitos ZTA não dopados, não apresentaram zircónia monoclínica após 96 horas em ambiente agressivo. Para os compósitos ATZ, apesar de a quantidade de zircónia monoclínica aumentar proporcionalmente ao conteúdo de zircónia presente no compósito, foi verificado que a extensão da degradação foi mínima, e relegada apenas para a superfície do material. Esta evidência permitiu que as propriedades mecânicas se mantivessem durante todo o período dos testes de degradação. Como era esperado, o compósito com a zircónia menos estável, o ATZ com a zircónia 2YSZ, apresentou o conteúdo mais elevado de zircónia monoclínica. No entanto, o facto de as propriedades mecânicas se manterem ao longo dos testes de degradação, confirmou que a degradação, mais uma vez, não se expandiu para o interior do material. A adição dos dois dopantes levou a melhorias na resistência à degradação dos compósitos ATZ, que apresentaram um conteúdo de zircónica monoclínica menor em comparação com as amostras não dopadas, após 96 horas de testes de degradação. No entanto, a adição de Ta2O5 teve um efeito desestabilizador na zircónia 2YSZ presente no compósito ZTA, sendo que foi detectada 10% de zircónia monoclínica após as 96 horas de testes de degradação. De novo, foi confirmado que esta degradação esteve presente apenas à superfície do material, visto que as propriedades mecânicas se mantiveram após estes testes. Foi também testada a biocompatibilidade destes compósitos. Células MG63 foram cultivadas nas amostras sinterizadas e foram realizados ensaios MTT e ensaios de atividade da fosfatase alcalina. Para todos os compósitos produzidos foi verificado que a viabilidade/proliferação celular aumentou significativamente desde o dia 1 para o dia 4. Os compósitos ZTA, que possuíam um maior número de locais de adesão, apresentaram uma maior adesão e proliferação celular, em comparação com os compósitos ATZ. A adição de La2O3 e Ta2O5 não induziu diferenças significativas na viabilidade celular dos compósitos ATZ. No entanto, no compósito ZTA, a adição de Ta2O5 levou a um pior desempenho devido à sua verificada hidrofobicidade. O presente estudo mostra que podem ser obtidas composições óptimas destes compósitos, com excelentes propriedades mecânicas, resistência à degradação e biocompatibilidade satisfatória.
Zirconia and alumina are well known bioceramics, used in the field of orthopedics. These materials have been used as hip and knee bearings thanks to their reduced wear rate and excellent biocompatibility. However, these ceramics presented some limitations: the brittleness of alumina and the aging sensitivity of zirconia. The aim became to develop long-lasting hip implants, with less inflammatory response and better designs. Zirconia alumina composites were then studied. In this study, three different grades of alumina toughened zirconia composites (ATZ) from 80 wt% to 90 wt% of zirconia, and three grades of zirconia toughened alumina (ZTA) from 80 wt% to 90 wt% of alumina were developed. Two different types of stabilized zirconia were used: 3 mol% yttria stabilized zirconia (3YSZ) was applied on the ATZ samples, and a 2 mol% yttria stabilized zirconia (2YSZ) on the ZTA samples. The ATZ with the best set of properties (80Z20A) was also tested with the 2YSZ, in order to produce a composite with improved mechanical properties and similar aging resistance to the ATZ with 3YSZ. Two selected additives, lanthanum oxide and tantalum pentoxide were added to the best ATZ and ZTA composite (80:20 composition) with the aim of enhance the aging resistance and mechanical properties of the produced materials. After a wet milling stage, the composite powders were achieved by spray-drying, from stabilized suspensions with a controlled nanometric particle distribution. The obtained composite powders were characterized through several techniques, such as scanning electron microscopy, X-ray diffraction, X-ray fluorescence, true density and specific surface area. Two stages of pressing, uniaxial pressing and cold isostatic pressing, were performed in order to improve the density of the green pieces. High density ceramics (with a relative density between 97% and 99%) were achieved with a low sintering temperature (1400ºC). The grain size of the sintered pieces was determined by SEM, and X-ray diffraction was performed in order to verify the present crystallographic phases. A disperse microstructure was obtained for all composites, with a nanometric grain size (under 500 nm). This set of producing stages, lead to the obtention of composites with enhanced mechanical properties. The Vickers Hardness, fracture toughness and flexural strength of the sintered samples were evaluated. Higher values of fracture toughness and flexural strength were achieved for the ATZ samples (up to 5 MPa.m1/2 and 1394 MPa respectively), while ZTA samples presented higher values of hardness (up to 1846 HV). As expected, the ATZ with 2YSZ presented enhanced mechanical properties, with an outstanding fracture toughness of 7.94 MPa.m1/2, and 1498 MPa of flexural strength. The addition of the two dopants to both ZTA and ATZ composites induced changes in their properties. The addition of Ta2O5 successfully improved the mechanical properties of both composites. In comparison with the undoped ATZ and ZTA composites, improvements of the hardness, fracture toughness and flexural strength were verified. The addition of La2O3 did not lead to an enhancement of the mechanical properties; however, it did not led to a deleterious effect either, and these properties were maintained. Accelerated aging tests were made on all produced composites, accordingly to ISO13356 (2008). The amount of monoclinic zirconia, which is an indicator of degradation on these composites, was quantified by X-ray diffraction analysis for 5,12,24,48 and 96 hours of aging tests. It was determined that, the undoped ZTA samples did not present monoclinic zirconia after 96 hours on an aggressive environment. Regarding the ATZ composites, even though the monoclinic zirconia content increased proportionally to the zirconia content present in the composite, it was found that the extent of degradation was minimal, since it was relegated to the material surface. This fact allowed the maintaining of the mechanical properties of the material throughout all the duration of the aging tests. As expected, the less stable composite, the ATZ with 2YSZ, presented the highest content of monoclinic zirconia. Nonetheless, the mechanical properties tested on the aged composite confirmed that the degradation did not expand to the material bulk. The addition of both dopants, successfully improved the aging resistance of the ATZ composite, presenting a lower amount of monoclinic zirconia after 96 hours of aging tests in comparison with the undoped ones. However, the addition of Ta2O5 destabilized the 2YSZ present on the ZTA composites, and 10% of monoclinic zirconia was detected after 96 hours of aging tests. Still, the mechanical properties were maintained on all the doped composites, which again confirmed the presence of degradation only at the material surface. The biocompatibility of these composites was also tested. MG63 cells were seeded on the sintered samples and MTT and alkaline phosphatase activity (ALP) assays were performed. The cell viability/proliferation increased significantly from day 1 to day 4 for all the produced composites. The ZTA composites, with more anchorage sites, presented higher cell adhesion and proliferation in comparison with the ATZ composites. The addition of La2O3 and Ta2O5 did not induced significant changes on the cell viability of the ATZ composites. However, the addition of Ta2O5 on the ZTA composite led to a poor performance, due to its verified hydrophobicity. The present study shows that optimal compositions of these composites can be achieved, with improved mechanical properties, hydrothermal degradation resistance and satisfactory biocompatibility.
Impergre, Amandine. "Interactions entre CoCrMo et milieu cellulaire : De la corrosion à la tribocorrosion." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEI060.
Повний текст джерелаThe long-term durability of joint replacements is based on their corrosion resistance and wear behavior. Whatever the materials used, degradation products (metal ions and wear debris) are formed due to the aggressiveness of body fluids and the biomechanics of the joints. Generally, these products are associated with post-operative complications and, as a result, their effects are critical clinical concerns. In this respect, tribocorrosion is a serious consideration in the performance of joint replacements. This work aims to contribute to the improvement of the understanding of the degradation mechanisms of a CoCrMo alloy, used as a joint prosthesis, by understanding the coupling of mechanical loads and cellular activity. This thesis has been structured according to a progressive approach, which begins with the study of the electrochemical behavior of a simulated physiological environment conducive to cell culture (RPMI-1640). Metal alloys and cells were successively added to the study system. The tests revealed that the oxidation of CoCrMo is accelerated in the presence of carbonaceous species and organic compounds, and that the cells are involved in the release of metal ions. A biotribocorrosion device has been developed to evaluate the influence of degradation products on cellular metabolism. This comprehensive multidisciplinary study combined experimental techniques from electrochemistry, biology and tribology to highlight the importance of biomaterial surface chemistry on tribocorrosion resistance and cytotoxicity. Finally, an experimental methodology was proposed in this work, in order to better understand the interaction between simulated physiological fluids and biomaterials
Mulliez, Marie Anne [Verfasser], and Thomas [Akademischer Betreuer] Grupp. "X-ray irradiation: an alternative technology to improve vitamin E blended polyethylene properties as orthopedic implant material / Marie Anne Mulliez ; Betreuer: Thomas Grupp." München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2020. http://d-nb.info/1218465883/34.
Повний текст джерела