Добірка наукової літератури з теми "Orthopedic implants – Biocompatibility"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Orthopedic implants – Biocompatibility".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Orthopedic implants – Biocompatibility"
Nasakina, E. O., M. A. Sevostyanov, and A. G. Kolmakov. "Surface Modification of Orthopedic Implants Based on Titanium Alloys." Biotekhnologiya 36, no. 5 (2020): 31–40. http://dx.doi.org/10.21519/0234-2758-2020-36-5-31-40.
Повний текст джерелаBai, Gong, Chen, Sun, Zhang, Cai, Zhu, and Xie. "Additive Manufacturing of Customized Metallic Orthopedic Implants: Materials, Structures, and Surface Modifications." Metals 9, no. 9 (September 12, 2019): 1004. http://dx.doi.org/10.3390/met9091004.
Повний текст джерелаAdam, Razvan, Horia Orban, Lavinia Dragomir, Claudia Milea, Iulian Antoniac, and Adrian Barbilian. "Investigation of Biodegradation Behavior of an Mg-1Ca Alloy during In Vivo Testing." Key Engineering Materials 752 (August 2017): 87–92. http://dx.doi.org/10.4028/www.scientific.net/kem.752.87.
Повний текст джерелаZaman, Hainol Akbar, Safian Sharif, Mohd Hasbullah Idris, and Anisah Kamarudin. "Metallic Biomaterials for Medical Implant Applications: A Review." Applied Mechanics and Materials 735 (February 2015): 19–25. http://dx.doi.org/10.4028/www.scientific.net/amm.735.19.
Повний текст джерелаLlopis-Grimalt, Maria Antonia, Aina Arbós, Maria Gil-Mir, Aleksandra Mosur, Prathamesh Kulkarni, Armando Salito, Joana M. Ramis, and Marta Monjo. "Multifunctional Properties of Quercitrin-Coated Porous Ti-6Al-4V Implants for Orthopaedic Applications Assessed In Vitro." Journal of Clinical Medicine 9, no. 3 (March 20, 2020): 855. http://dx.doi.org/10.3390/jcm9030855.
Повний текст джерелаArora, Himanshu, Anil Nafria, and Anup Kanase. "Rabbits as Animal Models in Contemporary Implant Biomaterial Research." World Journal of Dentistry 2, no. 2 (2011): 129–34. http://dx.doi.org/10.5005/jp-journals-10015-1069.
Повний текст джерелаKwan, Millie, and Ri Zhi Wang. "Bio-Fabrication of Nacre on Conventional Implant Materials." Key Engineering Materials 529-530 (November 2012): 255–60. http://dx.doi.org/10.4028/www.scientific.net/kem.529-530.255.
Повний текст джерелаNoreen, Sehrish, Engui Wang, Hongqing Feng, and Zhou Li. "Functionalization of TiO2 for Better Performance as Orthopedic Implants." Materials 15, no. 19 (October 3, 2022): 6868. http://dx.doi.org/10.3390/ma15196868.
Повний текст джерелаShi, Yi Ping, Don Fang Yin, Ping Hu, Yi Fei Huang, and Lin Liu. "Synthesis and Biocompatibility Evaluation of Poly(HEMA-Co-MMA) Orbital Implant." Key Engineering Materials 288-289 (June 2005): 485–90. http://dx.doi.org/10.4028/www.scientific.net/kem.288-289.485.
Повний текст джерелаHussain, Muzamil, Syed Hasan Askari Rizvi, Naseem Abbas, Uzair Sajjad, Muhammad Rizwan Shad, Mohsin Ali Badshah, and Asif Iqbal Malik. "Recent Developments in Coatings for Orthopedic Metallic Implants." Coatings 11, no. 7 (June 30, 2021): 791. http://dx.doi.org/10.3390/coatings11070791.
Повний текст джерелаДисертації з теми "Orthopedic implants – Biocompatibility"
Somayajula, Dilip Ayyala. "Biocompatibility of osteoblast cells on titanium implants." Cleveland, Ohio : Cleveland State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=csu1207322725.
Повний текст джерелаAbstract. Title from PDF t.p. (viewed on May 8, 2008). Includes bibliographical references (p. 72-76). Available online via the OhioLINK ETD Center. Also available in print.
Yeung, Che-yan, and 楊芷茵. "Antibacterial properties and biocompatibility of novel peptide incorporated titanium alloy biomaterials for orthopaedic implants." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hdl.handle.net/10722/197133.
Повний текст джерелаLin, Hsin-Yi. "Short term observations of in vitro biocorrosion of two commonly used implant alloys." Diss., Mississippi State : Mississippi State University, 2002. http://library.msstate.edu/etd/show.asp?etd=etd-08202002-105908.
Повний текст джерелаLeung, Kit-ying, and 梁潔瑩. "Anti-bacteria plasma-treated metallic surface for orthopaedics use." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B41633994.
Повний текст джерелаDrago, Manuela Aleluia. "Placa de osso bovino na osteossíntese de tíbia de coelhos: avaliação biomecânica ex-vivo." Universidade Federal do Espírito Santo, 2011. http://repositorio.ufes.br/handle/10/5097.
Повний текст джерелаO uso de materiais produzidos a partir de osso bovino tem sido proposto na confecção de implantes como pinos, placas e parafusos, por promoverem as mesmas funções de um enxerto ósseo, ou seja, serem osteoindutores e osteocondutores. Entretanto, aspectos estruturais e mecânicos devem ser estudados previamente ao uso in vivo de implantes de osso. Portanto, o objetivo desse estudo foi avaliar o comportamento mecânico, por meio do ensaio mecânico de flexão, de placas produzidas a partir osso cortical bovino, no reparo de fratura de tíbia de coelhos ex vivo. Para tal, 26 placas foram confeccionadas a partir de osso cortical bovino e conservadas em solução de sal a 150%. Foram utilizados três grupos para estudo: grupo GP (n=10), composto pelas placas ósseas; grupo GTP (n=16), tíbias de coelhos osteotomizadas e estabilizadas com placas ósseas e quatro parafusos; grupo GT (n=10), tíbias intactas. No ensaio biomecânico de flexão em três pontos, verificou-se a tensão máxima, deflexão máxima e rigidez. Os resultados foram submetidos ao teste de Kruskal-Wallis (p<0,05) e ao teste de Dunn. Comparando GT com o GTP, observou-se redução de 80% na tensão máxima. Também se notou redução de 87% na tensão máxima ao comparar GP com o GTP. Verificou-se que a placa de osso bovino possuiu maior tensão máxima que a tíbia do coelho. Houve redução a 52% na rigidez do GTP em relação ao GT. Não observou-se diferença significativa nesta propriedade entre GPT e GP. Observou-se diferença significativa entre os três grupos com relação à deflexão máxima, onde notou-se aumento de 100% e 30% nos grupos GTP e GP, respectivamente, em relação ao GT. Pode-se concluir que placas ósseas, no reparo de fratura de tíbia de coelhos ex vivo obtiveram propriedades mecânicas inferiores, quando comparada à tíbia intacta.
Uzumaki, Emilia Tieko. "Desenvolvimento de filmes de carbono tipo diamante (DCL) obtidos pelo processo de imersão em plasma para implantes osteoarticulares." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264998.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Made available in DSpace on 2018-08-07T02:27:14Z (GMT). No. of bitstreams: 1 Uzumaki_EmiliaTieko_D.pdf: 44142340 bytes, checksum: e8db433907d2fd2f88b260ed4cd8a791 (MD5) Previous issue date: 2006
Resumo: O carbono tipo diamante ("diamond-like carbon" - DLC) tem demonstrado características, como alta dureza, baixo atrito, resistência ao desgaste e à corrosão, e biocompatibilidade, que podem melhorar as propriedades de implantes sólidos e articulados. O processo de imersão em plasma vem sendo usado para depositar DLC em substratos tridimensionais, pois, com esta técnica, se consegue melhor adesão do que com as técnicas convencionais. Neste trabalho, filmes de DLC foram depositados, pelo processo de imersão em plasma, em lamínulas de vidro, silício e liga de titânio Ti-13Nb-13Zr. A caracterização da microestrutura, morfologia, dureza e adesão dos filmes de DLC foi feita por espectroscopia Raman, microscopia eletrônica de varredura (MEV), microscopia de força atômica (MFA), nanoindentação e ensaio de puxamento. Como exemplos de peças tridimensionais, filmes de DLC foram depositados em implantes osteoarticulares de quadril e joelho, titânio poroso (esponja de célula-aberta, semelhante à estrutura do osso esponjoso, expandida a vácuo), facas industriais, bisturi cirúrgico, engrenagem de motor, tubos de quartzo e de alumínio, e outros objetos. O filme obtido apresentou boas propriedades mecânicas, aumentando em 2 vezes a dureza da liga de Ti, alta adesão (filme sem interface definida e sem delaminação), resistência ao desgaste, baixa rugosidade e uniformidade de deposição em superfícies tridimensionais. Os resultados de corrosão (polarização de Tafel e espectroscopia de impedância eletroquímica em fluido corporal simulado) mostraram que o revestimento de DLC melhora a resistência da liga de Ti à corrosão. No ensaio de biocompatibilidade in vitro, com células fibroblásticas, foram estudados a citotoxicidade, adesão e morfologia celular (estudo citoquímico, microscopia de contraste de fase, MEV e MFA). No ensaio de biocompatibilidade in vivo, a liga de Ti-13Nb-13Zr, revestida com DLC, foi investigada em tecido muscular e ósseo de ratos após 4 e 12 semanas do procedimento cirúrgico. A interface formada entre o DLC e o tecido foi investigada por histologia convencional, e os implantes retirados por MEV. A interface entre o implante e o tecido ósseo, não descalcificado, foi estudada por MEV na modalidade retroespalhamento. Os resultados mostraram a biocompatibilidade in vitro e in vivo do filme de DLC, e foi verificado também que os implantes revestidos com DLC possuem resposta biológica mais favorável do que os implantes não revestidos
Abstract: Diamond-like carbon (DLC) films are often considered a suitable coating material for orthopaedic applications. It has proven characteristics, such as hardness, wear resistance, low friction coefficient and biocompatibility that improve the properties of solid and articulated implants. Recently, the plasma immersion process was used to deposit DLC films with superior adhesion properties to those prepared with conventional techniques. DLC coatings were deposited on glass coverslips, silicon (Si) and Ti-13Nb-13Zr substrates using the plasma immersion process. The microstructure, morphology, roughness, hardness and adhesion of DLC films were characterized using Raman spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), nanoindentation and pull-test. As examples, DLC films produced by plasma immersion were deposited on industrial knives, surgical knives, knee implants, femoral heads (of hip prostheses), titanium foams, transmission gears of motorcycles, aluminium pipes, quartz pipes, and others objects. The corrosion susceptibility of DLC coatings produced by plasma immersion was studied in a simulated body fluid environment (Hanks' solution) using polarization test and electrochemical impedance spectroscopy (EIS). Electrochemical results showed that DLC coating produced by plasma immersion could improve corrosion resistance, and no significant damage has been observed. Vero cells (fibroblasts) were utilized for the in vitro biocompatibility studies, by cytotoxicity, adhesion and cell morphology (phase contrast microscopy, SEM, AFM, and cytochemical study). DLC-coated Ti-13Nb-13Zr was investigated in an animal model using the muscular tissue and femoral condyles of rats for intervals of 4 and 12 weeks postoperatively. The interface between the implants and tissue were analysed by light microscopy, and the removed implants by SEM. The SEM by backscattering was used to access the interface between the implants the bone tissue without decalcifying. Our results indicate that DLC coatings are biocompatible in vitro and in vivo
Doutorado
Materiais e Processos de Fabricação
Doutor em Engenharia Mecânica
Hávová, Mariana. "Kostní implantáty na bázi železa." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-254467.
Повний текст джерелаPereira, Joana Maria Moreira. "Evaluation of in vitro biocompatibility of functionalized magnesium alloys for application in orthopedic implants." Master's thesis, 2021. http://hdl.handle.net/10773/30695.
Повний текст джерелаAs ligas de magnésio têm sido amplamente estudadas e aplicadas no campo da biomedicina, nomeadamente na área ortopédica, devido às suas propriedades promissoras. A biocompatibilidade, biodegradabilidade, propriedades mecânicas e osteogénicas destas ligas, permitem o seu uso como alternativas aos materiais atualmente disponíveis. No entanto, a corrosão descontrolada e a formação de hidrogénio, nas ligas de magnésio, podem causar sérios danos quando introduzidas no corpo humano. Para enfrentar estes desafios, diferentes métodos foram desenvolvidos de forma a controlá-los, como pré-tratamentos de superfície, revestimentos e diferentes elementos de liga. Os diferentes sistemas produzidos, no entanto, requerem uma avaliação detalhada da sua biocompatibilidade para uso posterior na área médica. Porém, existe uma lacuna na avaliação da biocompatibilidade, principalmente na hemocompatibilidade destes materiais. Este trabalho foi realizado no âmbito do projeto MAGICOAT e teve como objetivo avaliar a biocompatibilidade (citotoxicidade e hemocompatibilidade) de um sistema multicamada composto por uma liga de Mg1Ca, pré-tratada com hidroxiapatite, e um revestimento, subsequente, de poliéterimida (PEI) contendo microcápsulas de gelatina com cálcio ou partículas de carbonato de cálcio. Como as microcápsulas de gelatina carregadas de cálcio e as partículas de carbonato de cálcio deveriam ser incluídas no revestimento PEI, a sua morfologia, perfil de libertação de cálcio e sua citotoxicidade foram avaliadas antes dos ensaios de biocompatibilidade do sistema completo. O sistema multicamada completo foi inicialmente testado relativamente à sua citotoxicidade, analisando-se a integridade da membrana celular e a proliferação celular, através dos ensaios de LDH e WST-1. Após os resultados comprovarem que o sistema multicamadas não era tóxico, foram realizados testes de hemocompatibilidade. Testes in vitro para verificar a ocorrência de hemólise e a ativação do sistema complemento confirmaram a hemocompatibilidade do sistema após 4 horas de contato com o sangue.
Mestrado em Materiais e Dispositivos Biomédicos
Книги з теми "Orthopedic implants – Biocompatibility"
T, Geesink Rudolph G., and Manley Michael T, eds. Hydroxylapatite coatings in orthopaedic surgery. New York: Raven Press, 1993.
Знайти повний текст джерелаE, Lemons Jack, and ASTM Committee F-4 on Medical and Surgical Materials and Devices., eds. Quantitative characterization and performance of porous implants for hard tissue applications: A symposium. Philadelphia, PA: ASTM, 1987.
Знайти повний текст джерелаKim, Kyo-Han. Surface modification of titanium for biomaterial applications. Hauppauge, N.Y: Nova Science Publishers, 2009.
Знайти повний текст джерела(Ramaswamy), Narayanan R., and Rautray Tapash R, eds. Surface modification of titanium for biomaterial applications. New York: Nova Science Publishers, 2010.
Знайти повний текст джерела1935-, Older John, Chas F. Thackray Ltd, and Implant Bone Interface Symposium (1989 : Midhurst, England), eds. Implant bone interface. London: Springer-Verlag, 1990.
Знайти повний текст джерелаR, St John Kenneth, ASTM Committee F-4 on Medical and Surgical Materials and Devices., and Symposium on Biocompatibility of Particulate Implant Materials (1990 : San Antonio, Tex.), eds. Particulate debris from medical implants: Mechanisms of formation and biological consequences. Philadelphia, PA: ASTM, 1992.
Знайти повний текст джерелаEpinette, Jean-Alain M. D., and Rudolph G. T. Geesink. Hydroxyapatite Coated Hip and Knee Arthroplasty. Elsevier Science Ltd, 1995.
Знайти повний текст джерелаA, Epinette J., and Geesink Rudolph G. T, eds. Hydroxyapatite coated hip and knee arthroplastry. Paris: Expansion Scientifique Française, 1995.
Знайти повний текст джерелаЧастини книг з теми "Orthopedic implants – Biocompatibility"
Andrianne, Y., F. Burny, J. Quintin, and M. Donkerwolke. "Aspects of the Failure of the Implanted Systems in Orthopedics and Traumatology." In Biocompatibility of Co-Cr-Ni Alloys, 249–65. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-0757-0_24.
Повний текст джерелаKumar, Manjeet, Rajesh Kumar, Sandeep Kumar, and Chander Prakash. "Biomechanical Properties of Orthopedic and Dental Implants." In Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 506–18. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch026.
Повний текст джерелаKumar, Manjeet, Rajesh Kumar, Sandeep Kumar, and Chander Prakash. "Biomechanical Properties of Orthopedic and Dental Implants." In Handbook of Research on Green Engineering Techniques for Modern Manufacturing, 1–13. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-5445-5.ch001.
Повний текст джерелаHallab, Nadim, Robert Urban, and Joshua Jacobs. "Corrosion and Biocompatibility of Orthopedic Implants." In Biomaterials in Orthopedics. Informa Healthcare, 2003. http://dx.doi.org/10.1201/9780203913086.ch3.
Повний текст джерела"Corrosion and Biocompatibility of Orthopedic Implants." In Biomaterials in Orthopedics, 69–98. CRC Press, 2003. http://dx.doi.org/10.1201/b14227-5.
Повний текст джерела"Biotribology." In Tribomaterials, 363–90. ASM International, 2021. http://dx.doi.org/10.31399/asm.tb.tpsfwea.t59300363.
Повний текст джерелаOkazaki, Yoshimitsu, and Kiyoyuki Chinzei. "Development of Orthopedic Implants with Highly Biocompatible Ti Alloys." In High Entropy Materials - Microstructures and Properties [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.105389.
Повний текст джерелаRoy, Abhijit, Matthew Criado, John Ohodnicki, Howard Kuhn, and Prashant N. Kumta. "Material Aspects of Additively Manufactured Orthopedic Implants of Titanium Alloys." In Additive Manufacturing in Biomedical Applications, 201–22. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.a0006908.
Повний текст джерелаMarques de Castro, Moara, Débora Ribeiro Lopes, and Leonardo Viana Dias. "Mg-Based Composites for Biomedical Applications." In Magnesium Alloys [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.95079.
Повний текст джерелаKumaresan, Sakthiabirami, Soundharrajan Vaiyapuri, Jin-Ho Kang, Nileshkumar Dubey, Geetha Manivasagam, Kwi-Dug Yun, and Sang-Won Park. "Additive Manufactured Zirconia-Based Bio-Ceramics for Biomedical Applications." In Advanced Additive Manufacturing [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.101979.
Повний текст джерелаТези доповідей конференцій з теми "Orthopedic implants – Biocompatibility"
Badisha, Venkateswarlu, Suni Kumar Rajulapati, and Ratna Sunil Buradagunta. "Developing Mg Based Composites for Degradable Orthopedic Implant Applications: A Review." In 1st International Conference on Mechanical Engineering and Emerging Technologies. Switzerland: Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/p-y3p82n.
Повний текст джерелаFashanu, Felicia F., Denis J. Marcellin-Little, and Barbara S. Linke. "Review of Surface Finishing of Additively Manufactured Metal Implants." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8419.
Повний текст джерелаSalahshoor, M., and Y. B. Guo. "Surface Modification of Biodegradable Magnesium-Calcium Implants by Burnishing." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63730.
Повний текст джерелаGong, Haibo, Antonios Kontsos, Yoontae Kim, Peter I. Lelkes, Qingwei Zhang, Donggang Yao, Kavan Hazeli, and Jack G. Zhou. "Micro Characterization of Mg and Mg Alloy for Biodegradable Orthopedic Implants Application." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7395.
Повний текст джерелаMcGhee, Paul, Devdas Pai, Sergey Yarmolenko, Jagannathan Sankar, Zhigang Xu, Sudheer Neralla, and Yongjun Chen. "Directional-Tribological Investigation of Magnesium Alloys Under As-Cast and Hot Extrusion Conditions." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51920.
Повний текст джерелаHu, Yingbin, Shahrima Maharubin, Weilong Cong, and George Tan. "Laser Engineered Net Shaping of Titanium-Silver Alloy for Orthopedic Implant." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6611.
Повний текст джерелаKotoka, Rubenv, Ashlyn Worthy, Erica Clinard, Devdas Pai, Jag Sankar, and Sergey Yarmolenko. "Application of Magnesium Oxide Functional Coating for Controlling the Corrosion of Magnesium for Implant Applications." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87579.
Повний текст джерелаRasool, Tabinda, Syed Rehan Ahmed, Iqra Ather, Madeeha Sadia, Rashid Khan, and Ali Raza Jafri. "Synthesis and Characterization of Hydroxyapatite Using Egg-Shell." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51933.
Повний текст джерелаZhang, Qingwei, Vadym Mochalin, Ioannis Neitzel, Yury Gogotsi, Peter I. Lelkes, and Jack Zhou. "The Study on PLLA-Nanodiamond Composites for Surgical Fixation Devices." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38287.
Повний текст джерелаIbrahim, Hamdy, Andrew D. Klarner, Behrang Poorganji, David Dean, Alan A. Luo, and Mohammad Elahinia. "The Effect of Heat-Treatment on Mechanical, Microstructural, and Corrosion Characteristics of a Magnesium Alloy With Potential Application in Resorbable Bone Fixation Hardware." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8822.
Повний текст джерела