Добірка наукової літератури з теми "Orthomode transducers (OMTs)"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Orthomode transducers (OMTs)".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Orthomode transducers (OMTs)"

1

Navarrini, Alessandro, and Renzo Nesti. "Characterization Techniques of Millimeter-Wave Orthomode Transducers (OMTs)." Electronics 10, no. 15 (July 31, 2021): 1844. http://dx.doi.org/10.3390/electronics10151844.

Повний текст джерела
Анотація:
We report on advanced techniques for the accurate characterization of millimeter-wave Orthomode Transducers (OMTs) enabling the derivation of the fundamental parameters of such devices, i.e., the insertion loss, the return loss, the cross-polarization, and the isolation. These techniques include standard frequency-domain and time-domain VNA (Vector Network Analyzer) measurement methods, which can be applied to remove the effects of the waveguide transitions necessary to access the OMT ports and excite the desired modes. After reviewing the definition of the OMT parameters, we discuss the test equipment, the VNA calibration procedures as well as the VNA time-domain time-gating method for application in OMT characterization. We present simplified equations that relate the calibrated VNA measured quantities with the OMT S-parameters, illustrate various characterization methods, and examine various OMT experimental test setups. The advantages and disadvantages of each of the OMT characterization procedures are presented and compared among them. We provide a list of waveguide components required in the OMT test setups (adapters, loads, quarter-wave and longer waveguide sections, feed-horn, etc.), discuss the error terms introduced by such components and examine their impact on the measured values. Furthermore, we identify strategies to mitigate or remove the effects of the measured errors, to derive the desired OMT parameters. Different OMT configurations, with a distinct orientation of the waveguide input and outputs, are discussed. Although the presented techniques refer to the characterization of a specific configuration of a W-band OMT, the described methods can be applied to other OMT configurations and frequency ranges (from microwave to THz frequencies), therefore having a general validity.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Henke, Doug, and Stephane Claude. "Minimizing RF Performance Spikes in a Cryogenic Orthomode Transducer (OMT)." IEEE Transactions on Microwave Theory and Techniques 62, no. 4 (April 2014): 840–50. http://dx.doi.org/10.1109/tmtt.2014.2309551.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Gonzalez, Alvaro, and Shin’ichiro Asayama. "Double-Ridged Waveguide Orthomode Transducer (OMT) for the 67–116-GHz Band." Journal of Infrared, Millimeter, and Terahertz Waves 39, no. 8 (June 14, 2018): 723–37. http://dx.doi.org/10.1007/s10762-018-0503-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Fonseca, Nelson J. G. "Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas." Sensors 23, no. 2 (January 9, 2023): 735. http://dx.doi.org/10.3390/s23020735.

Повний текст джерела
Анотація:
A very compact waveguide orthomode transducer (OMT) is described in this paper. The design is characterized with a twofold rotationally symmetric cross-section in the probing area, adapted from a side-coupling OMT design, simultaneously enabling low port-to-port coupling and high cross-polarization discrimination (XPD) over a fractional bandwidth of about 15–20%. Compared to previously reported compact waveguide OMTs, the proposed design is simpler, thus facilitating its manufacture at millimeter-wave frequencies. The concept is demonstrated with a design in the K-band for a broadband communication satellite downlink over the frequency band of 17.3–20.2 GHz. For test purposes, transitions to standard waveguide WR42 are included, and the OMT is assembled with a conical horn antenna. The measured reflection and coupling coefficients are below −19.5 dB and −22.9 dB, respectively, over the nominal bandwidth, and they are in good agreement with the simulation’s results. The on-axis XPD, measured in an anechoic chamber, is better than 30 dB over the nominal bandwidth, which is also in line with simulations. The proposed waveguide OMT may be designed to fit in a lattice below one wavelength at the highest operating frequency, which is desirable for dual-polarized closely spaced array antennas in low and medium Earth orbit communication satellite systems. The simple mechanical design of the proposed OMT makes it particularly appealing for additive manufacturing techniques, as demonstrated with a variant of the design having folded single-mode waveguides, which preserves the RF properties of the original design.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Xiao, Jun, Geer Teni, Hongmei Li, Tongyu Ding, and Qiubo Ye. "A Dual-Polarized Horn Antenna Covering Full Ka-Band Using Turnstile OMT." Frontiers in Physics 10 (April 5, 2022). http://dx.doi.org/10.3389/fphy.2022.880606.

Повний текст джерела
Анотація:
This article presents a dual-polarized corrugated horn antenna incorporated a turnstile orthomode transducer (OMT) covering the full Ka-band (26.5–40 GHz). A three-stepped cylindrical tuning stub scattering element is designed in the turnstile junction to combine/split the two linearly polarized waves with high isolation. The proposed turnstile OMT shows a good simulated return loss better than 20 dB and a high isolation higher than 57 dB within the whole Ka-band. Then, a corrugated horn antenna with five-stage choke rings is designed. Finally, the proposed horn antenna incorporated in the turnstile OMT is fabricated and measured. The measured impedance bandwidth for |S11/22|≤ −15 dB is 50.7% from 25 to 42 GHz. The measured peak gain is 11.9 dBi. The proposed antenna system is a promising candidate for the 5G millimeter-wave applications.
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Orthomode transducers (OMTs)"

1

Yeap, Kim Ho, and Kazuhiro Hirasawa. "Fundamentals of a Radio Telescope." In Advances in Environmental Engineering and Green Technologies, 33–55. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2381-0.ch002.

Повний текст джерела
Анотація:
In radio astronomy, radio telescopes are used to collect radio waves emanated from cosmic sources. By analyzing these signals, the properties of the sources could be unraveled. A telescope typically consists of the following astronomical instruments: a primary and a secondary reflector, receiver optics which usually includes a lens or a pair of mirrors and a pair of feed horns (one for each orthogonal polarization [or simply a corrugated horn with an orthomode transducer OMT]), waveguides, a mixer circuit, a local oscillator, amplifiers, a detector circuit, and a data processing unit. This chapter provides a concise but complete overview of the working principle of the astronomical instruments involved in the construction of a radio telescope. The underlying physics of the components in a radio telescope, ranging from the antenna to the front-end and back-end systems, are illustrated.
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Orthomode transducers (OMTs)"

1

Zhou, Zhen, Bo Zhang, Zhongqian Niu, and Yong Fan. "A Design of Terahertz Wave Orthomode Transducer (OMT)." In 2019 International Conference on Microwave and Millimeter Wave Technology (ICMMT). IEEE, 2019. http://dx.doi.org/10.1109/icmmt45702.2019.8992171.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Granet, Christophe, and John S. Kot. "A New Type of Octave-Bandwidth Orthomode Transducer: The Bullet OMT." In 2020 4th Australian Microwave Symposium (AMS). IEEE, 2020. http://dx.doi.org/10.1109/ams48904.2020.9059410.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Tang, Xiuming, Kaiqiang Zhu, Yu Xiao, and Houjun Sun. "Design of a Waveguide Orthomode Transducer (OMT) at 340 GHz band." In 2022 IEEE Conference on Antenna Measurements and Applications (CAMA). IEEE, 2022. http://dx.doi.org/10.1109/cama56352.2022.10002478.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Latif, M., A. U. Salfi, and M. Q. Shafique. "Design & full-wave EM simulation of Ku-band orthomode transducer (OMT)." In 2013 10th International Bhurban Conference on Applied Sciences and Technology (IBCAST 2013). IEEE, 2013. http://dx.doi.org/10.1109/ibcast.2013.6512178.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії